DOCSLIB.ORG

Insulated-Systainer®

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Insulated-Systainer® systainer® A brilliant idea with a wide range of advantages Safely packed, clearly organised and quickly transported. Stackable and linkable Systematic design down to the very last detail Quality: 100% ABS, sturdy and impact- resistant, dust and splashwater-proof The systainer® will convince you in no time in everyday use! T-Loc One-hand operation Opening when linked Lock Open Connect Classic Line Innovative labelling Additional front handle Compatibility Fields of application Hospital Laboratory Medical Technology Anaesthesia Dental Emergency Medicine Pharmaceutical Veterinary Medicine Possibilities of use Hospital Laboratory Medical Technology Anaesthesia Dental Emergency Medicine Pharmaceutical Veterinary Medicine Insulated-systainer® The Insulated-systainer® are especially suitable for the safe dispatch of diagnostic samples of the material class UN 3373, fully correspond the packing regulation P 650 and were tested and approved by the BAM in Berlin (Federal Institute for Materials Research and Testing). Our Neopor and EPP inlays are equipped with a groove on 1 4 both sides to optionally attach dividers. Thus cooling packs can be inserted without having to touch neither the sample nor the cooling pack. Advantages of the referring inlay: In contrast to common styrofoam inserts the Neopor inlay has far better insulation properties. In addition it offers more stability for only a small difference in price. 2 5 The EPP inlay is characterized by its extreme sturdiness. It can be easily cleaned in industrial dish washers. 36 7 1 Insulated-systainer® T-Loc III, Neopor 4 Insulated-systainer® T-Loc III, EPP light grey art n° 80590402 light grey art n° 80590408 anthracite art n° 80590405 anthracite art n° 80590411 2 Insulated-systainer® T-Loc IV, Neopor 5 Insulated-systainer® T-Loc IV, EPP light grey art n° 80590403 light grey art n° 80590409 anthracite art n° 80590406 anthracite art n° 80590412 3 Insulated-systainer® T-Loc V, Neopor 6 Insulated-systainer® T-Loc V, EPP light grey art n° 80590404 light grey art n° 80590410 anthracite art n° 80590407 anthracite art n° 80590413 7 Divider (set two-parts) for Insulated-systainer® T-Loc art n° 80590071 A short extract of our product range Packing, Organising, Presenting, Transporting 1 5 913 262 10 14 3 7 11 15 NEW 4 8 12 16 1 systainer® T-Loc I 5 systainer® T-Loc V 9 MAXI-systainer® II 13 Rack-systainer® IV light grey art n° 80100001 light grey art n° 80100005 light grey art n° 80000029 light grey art n° 80000041 anthracite art n° 80100006 anthracite art n° 80100010 anthracite art n° 80000030 anthracite art n° 80000042 Outside dimensions H 105 x W 396 x D 296 mm Outside dimensions H 420 x W 396 x D 296 mm Outside dimensions H 157.5 x W 596 x D 396 mm With 4 Rack-boxes, (2 x 15 and 2 x 17 individual boxes) ® ® ® 2 systainer T-Loc II 6 MIDI-systainer T-Loc II 10 MAXI-systainer III Outside dimensions H 315 x W 400 x D 300 mm light grey art n° 80100002 light grey art n° 80101468 light grey art n° 80000014 anthracite art n° 80100007 anthracite art n° 80101467 anthracite art n° 80000015 14 systainer® Tool-Box 1 Outside dimensions H 157.5 x W 396 x D 296 mm Outside dimensions H 157.5 x W 496 x D 296 mm Outside dimensions H 210 x W 596 x D 396 mm light grey art n° 80101211 anthracite art n° 80101212 ® ® ® 3 systainer T-Loc III 7 MIDI-systainer T-Loc III 11 Drawer-systainer III - variant 1 Outside dimensions H 143 x W 396 x D 296 mm light grey art n° 80100003 light grey art n° 80101388 light grey art n° 80000017 anthracite art n° 80100008 anthracite art n° 80101389 anthracite art n° 80000023 15 systainer® Tool-Box 2 Outside dimensions H 210 x W 396 x D 296 mm Outside dimensions H 210 x W 496 x D 296 mm Outside dimensions H 210 x W 400 x D 300 mm light grey art n° 80101485 anthracite art n° 80101486 ® ® ® 4 systainer T-Loc IV 8 MINI-systainer T-Loc I 12 Drawer-systainer IV Outside dimensions H 250 x W 396 x D 296 mm light grey art n° 80100004 light grey art n° 80101365 light grey art n° 80000022 anthracite art n° 80100009 anthracite art n° 80101366 anthracite art n° 80000028 16 systainer® Storage-Box Outside dimensions H 315 x W 396 x D 296 mm Outside dimensions H 71 x W 265 x D 171 mm Outside dimensions H 315 x W 400 x D 300 mm light grey art n° 80101490 anthracite art n° 80101491 With detachable insert-boxes (2 x small, 2 x medium, 1 x big) Outside dimensions H 160 x W 396 x D 296 mm 17 21 25 29 18 22 26 30 19 23 27 31 NEW 20 24 28 32 17 systainer® T-Loc I for small bits vario 2 21 Tool-systainer® T-Loc III 25 Insert for small bits, 3 compartments 29 Folding trolley “TRAPO vario“ light grey art n° 80500003 light grey art n° 80500015 (vario 3) for systainer® I - V, Drawer-systainer®, anthracite art n° 80500004 anthracite art n° 80500016 for systainer® T-Loc I art n° 80500036 Rack-systainer® IV, systainer® Tool-Box 1 + 2 and With lid insert, EPP, 5 mm and insert with 2 compart- With two-piece tool lid and tool tray Incl. 9 dividers for 12 variable compartments systainer® Storage-Box art n° 80001023 ments. Incl. 6 dividers for 8 variable compartments More dividers available as a set, 5 pieces each Foldable and height-adjustable 22 Tool lid (max. number of compartments: 33, with 30 dividers) Carrying capacity: up to 50.00 kg 18 Box-systainer® T-Loc I for systainer® T-Loc lid I - V art n° 80101014 light grey art n° 80500007 With 9 loops and 5 pockets 26 Spray can insert, EPP 30 Folding trolley “MAXI-TRAPO“ anthracite art n° 80500008 for systainer® T-Loc IV + V art n° 80101022 for systainer® I - V, MIDI-systainer® T-Loc II + III, With lid insert, EPP, 5 mm and box insert 23 Lid foam, vaulted Suitable for most common aerosol cans (max. 14) Drawer-systainer®, Rack-systainer® IV, ® for systainer T-Loc lid I - V art n° 80101001 H: 130 mm, D: 110 mm, Ø 69 mm systainer® Tool-Box 1 + 2, systainer® Storage-Box ® 19 Office-systainer T-Loc II and MAXI-systainer® II + III art n° 80000056 24 Base pick & pluck foam, 25 mm, rigid light grey art n° 80500011 27 Additional front handle incl. adapter plates Carrying capacity: up to 150.00 kg anthracite art n° 80500012 for systainer® T-Loc I - V art n° 80101007 light grey art n° 80500044 With office lid “standard“ and wraparound foam Perforated cubes, 15 x 15 mm, for quarrying out anthracite art n° 80500045 31 systainer® T-Loc safety set for carrying the systainer® T-loc I + II for systainer® T-Loc I - V and MIDI-systainer® T-Loc II + III ® Base pick & pluck foam, 25 mm, smooth 20 Info-systainer T-Loc IV and MIDI-systainer® T-Loc II upright light grey art n° 80101201 (without pic.) light grey art n° 80500019 anthracite art n° 80101202 for systainer® T-Loc I - V art n° 80101005 anthracite art n° 80500020 28 Caster ”SYS-CART“ Consisting of lockable T-Loc catch, metal barrier, Perforated cubes, 15 x 15 mm, for quarrying out ® ® With suspension frame for hanging file folders for systainer I - V, Drawer-systainer , protective washer, circlip and 2 keys and binders according to DIN 821 Rack-systainer® IV, systainer® Tool-Box 1 + 2, systainer® Storage-Box and MAXI-systainer® II + III 32 Adaptor-set “ADAPT-L“, 2 parts art n° 80600196 light grey art n° 80600242 Four big swivel castors (ø: 100 mm), two of them anthracite art n° 80600243 with brake function and wheel bases for optimal Fastening of big, broad parts and containers running, recessed grips on the sides and through on the outside of the systainer® T-Loc I - V holes for U-lock. Carrying capacity: up to 100.00 kg and MIDI-systainer® T-Loc II + III Service We will work together with you to find a suitable solution for your print. The minimum quantity is only 50 systainer® per size. Printing on individual needs and take over planning, sample construction and the catches is possible from a minimum quantity of 250 pieces. mounting, if desired. Labelling Design We have special labelling sets available for you as accessories. With an individual choice of colours for body and lid, handle Different design suggestions can be downloaded from our website and catches you can adapt the appearance of your systainer® www.TANOS.de. to your corporate design. Colours Print Besides two basic colours (light grey and anthracite) you have a choice Your company logo or a publicity slogan can be printed on all of other standard colours. Furthermore, due to different colours of the four sides of the systainer® body and on the lid – even in colour catches and the handle, you can create your individual systainer®. Colour overview Dimensions Body with lid, handle T-Loc Outside dimensions in mm Inside dimensions in mm Weight Pallet dimensions Pieces Height and catch systainer® T-Loc I H* 105 x W 396 x D 296 H 75 x W 383 x D 273 1.30 kg 128 183 cm systainer® T-Loc II H* 157.5 x W 396 x D 296 H 127.5 x W 383 x D 267 1.50 kg 88 188 cm RAL 7035, light grey ® * systainer T-Loc III H 210 x W 396 x D 296 H 180 x W 382 x D 266 1.80 kg 64 183 cm RAL 7016, anthracite systainer® T-Loc IV H* 315 x W 396 x D 296 H 285 x W 382 x D 266 2.10 kg 40 173 cm systainer® T-Loc V H* 420 x W 396 x D 296 H 384 x W 381 x D 265 2.70 kg 32 187 cm RAL 9004, black MIDI-systainer® T-Loc II H* 157.5 x W 496 x D 296 H 127.5 x W 483 x D 267 1.90 kg 66 188 cm MIDI-systainer® T-Loc III H* 210 x W 496 x D 296 H 180 x W 483 x D 267 2.10 kg 48 183 cm RAL 1007, daffodil yellow ® * MINI-systainer T-Loc I H 71 x W 265 x D 171 H 53 x W 254.5 x D 154.5 0.43 kg 400 192 cm RAL 2011, deep orange Classic Line Outside dimensions in mm Inside dimensions in mm Weight Pallet dimensions RAL 3002, carmine red Pieces Height MAXI-systainer® II H* 157.5 x W 596 x D 396 H 124 x W 545 x D 330 3.40 kg 44
Load more

Recommended publications
  • Price List 2020 with Addendum1 January 1, 2020
    flexibility in furniture PRICE LIST 2020 WITH ADDENDUM1 JANUARY 1, 2020 UPHOLSTERED SEATING | MOLDED SEATING | WOOD SIDED SEATING | BEDROOM FURNITURE | WOOD, METAL & MOLDED CHAIRS & TABLES | WOOD SHELVING | CARRELS 800-221-6638 | MODUFORM.COM MODUFORM | TABLE OF CONTENTS A. General Information E. Tables & Carrels: Wood | Metal & Molded F. Lounge Seating: Molded | Wood Sided G. Seating | Fully Upholstered Terms & Conditions Wood Tables & Carrels Molded Bristol G6 Multiple Fabric | General Information Acton E3 520 ModuForm Lounge Seating F6 Bristol Flex Cover G7 General Information | COM 1150 E5 528 ModuForm Lounge Seating F7 Bounce G8 Multiple Fabric | Layouts 1160 E5 3000 ModuSeat Beam Seating F8 Burke Recliner G8 COM Data Sheet Groton E6 5000-250 ModuMaxx Lounge Seating F13 Chelsea G9 Custom Finish Data Sheet Mission E6 5000 ModuMaxx Beam Seating F14 Chelsea Flex Cover G9 Process Review 1100 E7 Chelsea Tables G10 Trestle E7 Wood Sided Lounge Chelsea Jr. G11 B. Molded Beds | Furniture Flip E8 RS | Rounder F17 Collegetown G12 Seclusion Bed B2 Utility E9 800 | ModuBlock F18 Collegetown Flex Cover G13 Secure Seclusion Bed B2 800 | ModuBlock Occasional E9 810 | ModuEsque F19 Collegetown Tight Seat G14 Moxie | Molded Bedroom B3 700 Heavy Duty Activity E10 MS | Mission F20 Dalton G15 SF | Marco F21 Emma G21 C. Casegoods & Bedroom Furniture Metal & Molded Tables MM | Marco Public Area Seating F22 Exeter G22 FIT C4 ModuMaxx X-Base Tables E13 ROC | Olive's Chair | Rocker F23 Forbes G23 Everest C8 ModuMaxx 4" Steel Leg Tables E14 350 | ModuRocker F24 Hadley G24 Roommate C15 ModuMaxx Cluster | 4 Attached Seats E15 Joanna G25 Lowell C25 ModuMaxx Cluster | 6 Attached Seats E16 Julia G26 Transitions C33 ModuMaxx Cluster | 8 Attached Seats E16 Kensington G33 Fortress C36 ModuMaxx Picnic Tables E17 Louis G34 Passages C39 ModuMaxx Folding Tables E17 Madison G35 Newman G36 Mattresses | Box Springs | Sets Peabody G37 Boxsprings | Foundations C46 Salem G38 Mattresses C46 Salem Flex Cover G39 University G40 D.
    [Show full text]
  • For the Craft & Cleaning
    PRODUCT RANGE 2019/2020 Craft & Cleaning STA RS FOR THE CRAFT & CLEANING Whatever the challenge awaits you – here you will find equipment that complements your great performance! Made in Germany. Made for you. Professional vacuum cleaners from starmix will win you over with high performance, functionality and longevity. The basis for this is the consistent implementation of the "Made in Germany" quality philosophy. We develop and manufacture starmix vacuum cleaners at our "ELECTROSTAR GmbH" busi- ness headquarters in the Swabian Reichenbach. They are subjected to many of the toughest quality tests in accordance with international standards. A STRONG TEAM Thanks to an engaged workforce we have successfully mastered all development steps in our history. The staff have a deep-seated connection to the company. We are a strong team of competent, well-trained people who aim our various abilities towards one common goal: the satisfaction of our customers. FUTURE-ORIENTATED INNOVATION In more than 90 years of our company's history, we have proven our innovation, time and time again with smart inventions in the form of functional detail solutions, which make working with starmix vacuum cleaners so easy. In particular, you benefit as a user when working with large amounts of dust formation from our unique filter and filter cleaning technology, such as the pulse filter cleaning. A modular technology basis creates powerful solutions for various uses and vacuum cleaner types, which are all tailored to your application. With our modern innovation management, we are well prepared for the future. *Guarantee in Germany only STARMIX PHILOSOPHY Made in Germany.
    [Show full text]
  • Herakles Iconography on Tyrrhenian Amphorae
    HERAKLES ICONOGRAPHY ON TYRRHENIAN AMPHORAE _____________________________________________ A Thesis presented to the Faculty of the Graduate School University of Missouri-Columbia _____________________________________________ In Partial Fulfillment Of the Requirements for the Degree Master of Arts ______________________________________________ by MEGAN LYNNE THOMSEN Dr. Susan Langdon, Thesis Supervisor DECEMBER 2005 ACKNOWLEDGEMENTS I would like to thank my thesis advisor, Dr. Susan Langdon, and the other members of my committee, Dr. Marcus Rautman and Dr. David Schenker, for their help during this process. Also, thanks must be given to my family and friends who were a constant support and listening ear this past year. ii TABLE OF CONTENTS ACKNOWLEDGEMENTS………………………………………………………………ii LIST OF ILLUSTRATIONS……………………………………………………………..v Chapter 1. TYRRHENIAN AMPHORAE—A BRIEF STUDY…..……………………....1 Early Studies Characteristics of Decoration on Tyrrhenian Amphorae Attribution Studies: Identifying Painters and Workshops Market Considerations Recent Scholarship The Present Study 2. HERAKLES ON TYRRHENIAN AMPHORAE………………………….…30 Herakles in Vase-Painting Herakles and the Amazons Herakles, Nessos and Deianeira Other Myths of Herakles Etruscan Imitators and Contemporary Vase-Painting 3. HERAKLES AND THE FUNERARY CONTEXT………………………..…48 Herakles in Etruria Etruscan Concepts of Death and the Underworld Etruscan Funerary Banquets and Games 4. CONCLUSION………………………………………………………………..67 iii APPENDIX: Herakles Myths on Tyrrhenian Amphorae……………………………...…72 BIBLIOGRAPHY………………………………………………………………………..77 ILLUSTRATIONS………………………………………………………………………82 iv LIST OF ILLUSTRATIONS Figure Page 1. Tyrrhenian Amphora by Guglielmi Painter. Bloomington, IUAM 73.6. Herakles fights Nessos (Side A), Four youths on horseback (Side B). Photos taken by Megan Thomsen 82 2. Tyrrhenian Amphora (Beazley #310039) by Fallow Deer Painter. Munich, Antikensammlungen 1428. Photo CVA, MUNICH, MUSEUM ANTIKER KLEINKUNST 7, PL. 322.3 83 3. Tyrrhenian Amphora (Beazley #310045) by Timiades Painter (name vase).
    [Show full text]
  • US EPA, Pesticide Product Label, RF2174 FLY BAIT STATION,01/22
    UNITED STATES ENVIRONMENTAL PROTECTION AGENCY WASHINGTON, DC 20460 OFFICE OF CHEMICAL SAFETY AND POLLUTION PREVENTION January 22, 2020 Martin Hoagland, Ph.D. Senior Regulatory Manager Wellmark International 1501 E. Woodfield Rd., Suite 200W Schaumburg, IL 60173 Subject: Label and CSF Amendment – Revision of Basic CSF and addition of Sublabel B for alternate packaging Product Name: RF2174 Fly Bait Station EPA Registration Number: 2724-839 Application Date: September 25, 2019 Decision Number: 556128/557876 Dear Dr. Hoagland: The amended label and CSF referred to above, submitted in connection with registration under the Federal Insecticide, Fungicide and Rodenticide Act, as amended, are acceptable. This approval does not affect any conditions that were previously imposed on this registration. You continue to be subject to existing conditions on your registration and any deadlines connected with them. A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously accepted labeling. You must submit one copy of the final printed labeling before you release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may distribute or sell this product under the previously approved labeling for 18 months from the date of this letter. After 18 months, you may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3. Please note that the record for this product currently contains the following CSF(s): • Basic CSF dated 01/18/2019 Should you wish to add/retain a reference to the company’s website on your label, then please be aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide Act and is subject to review by the Agency.
    [Show full text]
  • Maverick Series 3 Series Adjustable Desks Community Tables | Maverick Conference Conference Storage Units |
    Maverick Series maverick series Our signature Maverick Series combines classic all-laminate designs with the ability to mix and match two of our 20 standard colors to provide modern day durability for any office space. Storage Units | Adjustable Desks Conference | Community Tables For the latest information on products and updates visit: conference collection 4 3 maverick series 3 Days and DAYS Lead Time Maverick Series Product Specifications Colors • 20 standard colors are available on tops and chassis. Two colors may be specified at no charge. Top / Worksurfaces • 1” TFM (Thermally Fused Melamine) on industrial quality (45 lb.) particleboard. • 2 mm thermally-fused PVC edge banding. • Metal-to-metal connection fittings are installed for bridges and returns. • Woodgrain direction on tops of bridges and returns runs from user side to approach side to coordinate with main unit tops. Chassis Construction • TFM chassis fastened by screws, steel brackets, and/or concealed fasteners. 3 • ⁄4 pedestal is standard; double-wall pedestal housing construction. 3 • 1”-thick end panels on desks, returns, credenzas, and bookcases. ⁄4” thick end panels on hutches. 3 3 • ⁄4 height modesty panel on ⁄4 pedestal unit is standard; ½” modesty may be specified at no upcharge on bridges and returns, where specified. • Full-height modesty panel on returns or credenzas with lateral file or personal lateral file is standard. 3 3 1 5 • Modesty Panel Heights: ⁄4” modesty is 18 ⁄4”. ⁄2” modesty is 14” and full modesty is 27 ⁄8”. 3 • Bullet desks are standard with ⁄4 modesty panel and have 4” black metal posts. • The modesty inset on the approach side for 30”-deep tops is 6”; for 36”-deep tops, inset is 12”.
    [Show full text]
  • 2014 Festoo USA Catalog
    2014 Catalog www.festoolusa.com 1 SOME TOOLS STAND APART MOST WHEN THEY WORK TOGETHER. Whether seriously stepping things up to finally own that first Festool, or further pushing the capabilities of those you already use, the question is the same. What value do you place on bringing the best possible equipment to any job and every project? Sawing. Routing. Sanding. Ripping down large sheets or cutting a clean miter, Festool puts definitive authority and control in your hands. By creating the most advanced tools for a variety of detail-demanding tasks, we fuel the passion of elite pros, which generates even wider aspiration. A Festool isn’t simply a tool, but an entire system designed around uncompromising principles that make your work more precise, safe, efficient and absolutely worth the effort. As you’re about to see, one good Festool deserves another. Tooltechnic Systems, LLC (herein after "Festool USA") is the exclusive U.S. importer of Festool power tools, which are designed in Germany by members of the TTS Tooltechnic Systems Group. Festool USA is a division of Tooltechnic Systems, LLC. Festool is not responsible for typographical errors and reserves the right to modify pricing or scope of delivery at any time. www.festoolusa.com 3 Table of Contents 4 Dust Extractors 16 Guide Rails 22 Multifunction Tables 28 Storage and Mobility 38 Track Saws 44 Miter Saw 52 Jigsaws 66 Routers 80 Router Tables 86 Joiners 94 Planer 100 Drills/Drivers 114 Multi-Mode Sanders 120 Random Orbital Sanders 126 Orbital Sanders 134 Specialty Sanders Package pricing available on inside of back cover.
    [Show full text]
  • Festool System
    296 Dust extraction 09 Overview of products and applications 298 CLEANTEC mobile dust CT 17, CTL SYS, CTL MINI, 302 extractors, compact CTL MIDI CLEANTEC mobile dust extractors CT 26/36/48 306 CLEANTEC AUTOCLEAN CT 26/36/48 AC, CT 36 AC PLANEX, 308 mobile dust extractors CT 26/36 AC HD CLEANTEC special extractors CT 48 EC, CT 48 EC/B22, CTH 26/48 311 Accessories and consumable materials 314 The Festool system 09 www.festool.com.au 297 Dust extraction Overview of products and applications Page 302 303 304 305 306 306 Compact yet effective. Lightweight yet powerful. Whether on the construction site CT 17 CTL SYS CTL MIDI CTL MINI CTL 26/36 or in the workshop – Festool mobile dust CTM 26/36 extractors are prepared for every challenge. Applications CLEANTEC CLEANTEC mobile dust extractors, compact mobile dust extractors Application area Assembly (low quantities of coarse dust) Workshop, industry Building site, drywall construction (large quantities of fine dust) Zone 22 Application Extraction of dust from power tools Dust extraction from air tools (LE variants) Cleaning work Continuous industrial use Special features Modular flexibility with 2 sockets/compressed air module AUTOCLEAN fully automatic main filter cleaning system Combination with ASA/EAA Type of dust wood dust Mineral, quartziferous dust Aluminium, powder coating and polyurethane dust Carcinogenic dust and asbestos Technical data Power consumption (W) 400 – 1.200 1.000 400 – 1.200 400 – 1.200 350 – 1.200 350 – 1.200 350 – 1.200 350 – 1.200 350 – 1.200 350 – 1.200 350 – 1.200 150 – 1.100 150 – 1.100 350 – 1.000 Max.
    [Show full text]
  • Ecfr — Code of Federal Regulations
    eCFR — Code of Federal Regulations About GPO | Newsroom/Media | Congressional Relations | Inspector General | Careers | Contact | askGPO | Help Home | Customers | Vendors | Libraries FDsys: GPO's Federal Digital System About FDsys ELECTRONIC CODE OF FEDERAL REGULATIONS Search Government Publications Browse Government Publications View past updates to the e-CFR. Click here to learn more. e-CFR Navigation Aids e-CFR data is current as of November 3, 2015 • Browse • Simple Search Title 29 → Subtitle B → Chapter XVII → Part 1910 → Subpart Z → §1910.1200 • Advanced Search * Boolean Browse Previous | Browse Next * Proximity Title 29: Labor • Search History PART 1910—OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Subpart Z—Toxic and Hazardous Substances • Search Tips • Corrections • Latest Updates §1910.1200 Hazard communication. • User Info (a) Purpose. (1) The purpose of this section is to ensure that the hazards of all chemicals produced or imported are • FAQs classified, and that information concerning the classified hazards is transmitted to employers and employees. The • Agency List requirements of this section are intended to be consistent with the provisions of the United Nations Globally Harmonized System of Classification and Labelling of Chemicals (GHS), Revision 3. The transmittal of information is to be • Incorporation By Reference accomplished by means of comprehensive hazard communication programs, which are to include container labeling and other forms of warning, safety data sheets and employee training. Related Resources (2) This occupational safety and health standard is intended to address comprehensively the issue of classifying the The Code of Federal Regulations potential hazards of chemicals, and communicating information concerning hazards and appropriate protective (CFR) annual edition is the measures to employees, and to preempt any legislative or regulatory enactments of a state, or political subdivision of a codification of the general and state, pertaining to this subject.
    [Show full text]
  • Do More with DOMINO in a Class by Itself, This Pricey Power Tool Makes Mortising Easy and Accurate Enough to Change 1
    Do More with DOMINO In a class by itself, this pricey power tool makes mortising easy and accurate enough to change 1. MARK the way you do woodworking By Tim Snyder hen I had my fi rst look at the Domino shallow biscuit slots, the Domino cuts precise you can tailor your loose-tenon joinery to fi t DF 500, I wasn’t that impressed. mortises of diff erent sizes with surprising your project. To make the job even faster and WTh e tool’s resemblance to a biscuit speed and precision. Th is performance is easier, you can buy ready-made loose tenons joiner left me wondering why Festool would possible because of a unique drivetrain that that match your mortise sizes. try to compete with well-made tools from combines router-level RPMs with oscillating Building on the popularity of the fi rst Porter-Cable, DeWalt and Lamello. I was action. By using diff erent spiral-fl uted cutters Domino joiner (the DF 500), Festool devel- in for a surprise. Instead of milling narrow, and making adjustments on the machine, oped an XL model that can mill mortises that Adjustable Mortise length Plunge depth Domino Joiner DF 500 Q $895.00 fence adjustment adjustment The Domino DF 500 was Festool’s fi rst portable mortising machine. With four mortising widths, this tool can handle anything from face frames and delicate slat assemblies to small furniture projects and cabinet doors. Basic price includes: Systainer, power cord, wrench, 6mm cutter. Three other cutters available, along with matching Domino tenons. RPM: 23,400 TOOL WEIGHT: 7 lbs.
    [Show full text]
  • PRICE LIST 2020V.Ms STATE of MISSISSIPPI APRIL 15, 2020
    flexibility in furniture PRICE LIST 2020v.ms STATE OF MISSISSIPPI APRIL 15, 2020 UPHOLSTERED SEATING | MOLDED SEATING | WOOD SIDED SEATING | BEDROOM FURNITURE | WOOD, METAL & MOLDED CHAIRS & TABLES | WOOD SHELVING | CARRELS 800-221-6638 | MODUFORM.COM TERMS AND CONDITIONS MODU FORM. INC. TERMS AND CONDITIONS By placing an order for furniture, material or other products (“products” or "goods"), Buyer agrees to these terms and conditions which shall prevail over inconsistent provisions in any other form or document of Buyer. PRICES: When quantity price discounts are quoted by Seller, such discounts are computed separately for each type of product to be sold and are based upon the quantity of each type and each size ordered at any one time for immediate delivery. If any order is reduced or canceled by Buyer with Seller's consent, it is agreed that prices will be adjusted upward to the higher prices, if applicable, for the uncanceled quantity. All prices in a catalog are list and FOB origin. Possession of this catalog or price list does not constitute an offer to sell. Pricing in a catalog or price list is for standard delivery. Standard delivery does not include truck unloading, removal of packaging, non-dock delivery, inside delivery, limited access delivery, residential delivery, lift gate, multiple drops on-site per shipment, multiple shipments per order (that could be accommodated by one delivery), uncrating or installation. Special requests for delivery should be made at the time of ordering. TAXES : Unless otherwise specified in the quotation, the prices shown do not include any taxes, import or export duties, tariffs, or custom charges.
    [Show full text]
  • SATA Price List 2020
    Spray Guns | Cup Systems | Breathing Protection | Filter Technology | Accessories Breathing Protection EN_Preisliste - 2020 - INT (ohne Preise).indb 79 06.02.2020 10:21:41 Breathing Protection without Activated Charcoal Belt Unit Compressed air-supplied respirator hood to combine with triple-stage compressed air filters, e.g. SATA filter 484 with integrated activated charcoal filter stage. SATA air vision 5000 respirator hood Art. No. 1000249 SATA air regulator SATA air vision 5000 set belt plus Art. No. 213819 Art. No. 1030668 SATA air regulator set Art. No. 1000108 SATA air regulator Art. No. 1000190 Compressed air Accessories: connection (hood) SATA air humidifier Art. No. 1000299 Gun air hose connection Accessories: SATA air warmer Art. No. 1007005 Connection for safety com- pressed air hose (from the wall- Accessories: mounted filter regulation unit) SATA air cooler Art. No. 1006982 Recommended accessories SATA air humidifier Breathing air humidification for a comfortable breathing climate Art. No. 1000299 SATA air warmer Art. No. 1007005 SATA air cooler Art. No. 1006982 Safety compressed air hose crush and kink resistant, 6 m Art. No. 49080 Gun air hose 9 mm inner diameter, 1.2 m to connect a spray gun to the belt unit Art. No. 13870 80 20162020 EN_Preisliste - 2020 - INT (ohne Preise).indb 80 06.02.2020 10:21:58 Breathing Protection with Activated Charcoal Belt Unit Compressed air-supplied respirator hood to combine with double-stage compressed air filters fixed to the wall, e.g. SATA filter 444 without integrated activated charcoal filter stage. SATA air vision 5000 respirator hood Art. No. 1000249 SATA air vision 5000 SATA air regulator carbon set belt plus Art.
    [Show full text]
  • Hazard Communication. Chemicals Which They Produce Or Im- (A) Purpose
    Occupational Safety and Health Admin., Labor § 1910.1200 of a currently effective determination chemicals in the workplace, as well as by the Assistant Secretary of Labor of containers of chemicals being that such program is compatible with shipped to other workplaces; prepara- the requirements of this section. Such tion and distribution of safety data determinations currently are in effect sheets to employees and downstream only in the States of Alabama, Arkan- employers; and development and imple- sas, California, Kansas, Kentucky, mentation of employee training pro- Florida, Mississippi, New Hampshire, grams regarding hazards of chemicals New York, North Carolina, Texas, Ten- and protective measures. Under section nessee, Oregon, Idaho, Arizona, Colo- 18 of the Act, no state or political sub- rado, Louisiana, Nebraska, Wash- division of a state may adopt or en- ington, Maryland, North Dakota, force any requirement relating to the South Carolina, and Georgia. issue addressed by this Federal stand- [39 FR 23502, June 27, 1974, as amended at 43 ard, except pursuant to a Federally-ap- FR 49746, Oct. 24, 1978; 43 FR 51759, Nov. 7, proved state plan. 1978; 49 FR 18295, Apr. 30, 1984; 58 FR 35309, (b) Scope and application. (1) This sec- June 30, 1993. Redesignated at 61 FR 31430, June 20, 1996] tion requires chemical manufacturers or importers to classify the hazards of § 1910.1200 Hazard communication. chemicals which they produce or im- (a) Purpose. (1) The purpose of this port, and all employers to provide in- section is to ensure that the hazards of formation to their employees about the all chemicals produced or imported are hazardous chemicals to which they are classified, and that information con- exposed, by means of a hazard commu- cerning the classified hazards is trans- nication program, labels and other mitted to employers and employees.
    [Show full text]