Homeowner's Guide to Safe Digging in Nevada

Total Page:16

File Type:pdf, Size:1020Kb

Homeowner's Guide to Safe Digging in Nevada HOW 811 WORKS 811 is a national number created by the Federal Homeowner’s Communications Commission to help protect homeowners and contractors from unintentionally hitting underground utility lines while working on Guide to digging projects. 811 is a free service. Public Utilities Commission of Nevada • CALL1 81 TWO FULL WORKING DAYS Safe Digging (Monday through Friday, 7 a.m. - 5 p.m.) before digging. In other words, call 811 no later than Wednesday if you plan to dig on the weekend. in Nevada • ONLINE REQUESTS for 811 services can be made at usanorth811.org. • TELL THE 811 OPERATOR where you plan to dig and the type of work you will be doing. • 811 WILL NOTIFY affected utility companies. • THE UTILITIES WILL SEND A LOCATOR to mark the approximate location of your buried utility lines, pipes and cables, or notify you if the buried lines are clear (more than 24" from the area where you plan to dig). • PRE-MARK YOUR DIG AREA in white (paint, flags, flour, etc.) to identify the appropriate area for the locator to mark. • THE LOCATORS WILL MARK the approximate location of underground lines using the color codes below. • DIG SAFELY! Color Code for Marking Excavation It’s free. It's easy. It’s the law. Sites & Underground Facilities NORTHERN NEVADA 1150 E. William Street Proposed Temporary Survey Carson City, NV 89701 Excavation Markings Phone: (775) 684-6101 Fax: (775) 684-6110 Gas, Oil, Steam Electric Chemical SOUTHERN NEVADA 9075 W. Diablo Dr., Ste. 250 Communication Las Vegas, NV 89148 Sewer Cable TV Phone: (702) 486-7210 Fax: (702) 486-7206 Reclaimed Water Irrigation Water Slurry puc.nv.gov ELECTRIC LINES WATER LINES SAFE DIGGING 101 • Main electric lines are generally buried in • Main water lines are generally buried under the Hitting an underground utility line while digging can conduit under or behind the sidewalk in a utility street. cause environmental damage, serious personal easement. • A utility locator will use blue paint to mark where injury and disrupt service to an entire neighborhood. • A utility locator will use red paint to mark where the water line runs from the main in the street the electric cable runs underground from the to a residential or commercial meter box, which IF YOU DAMAGE A UTILITY LINE sidewalk area to the meter on a house, usually is usually located in or behind the sidewalk, in Call 811 if you damage or make contact with a buried located on the side of the garage. the front and usually on the side property line utility line. Call the affected utility if you know which • The homeowner is responsible for knowing the of the home. type of line you damaged. If you break a natural gas location of electric lines that run from the meter • Water lines are homeowner and/or business line, move to a safe location, call 911 & your natural to other structures on the property. owner-owned from the meter box to the gas utility. Never attempt to control the gas flow or home or business. It is the make repairs to a gas line, or any homeowner and/or business utility line, if damage occurs. owner’s responsibility to know the water line's location SPECIAL PRECAUTIONS Solid lines indicate a gas, electric, on his property. • Dig slowly/carefully with communication, water, or sewer line owned, maintained and hand tools (i.e. shovel) when marked by a utility. SEWER LINES Utility gas, digging within 24" of utility • Main sewer lines generally marks to ensure adequate electric & communication run under the street & connect clearance & confirm the Dashed lines indicate a gas, lines. electric, water, or sewer line to a home through a line buried utility’s location. owned, maintained and marked running from the main to the • Never plant trees or other by a homeowner. center, front of the home. objects directly above Homeowner • Sewer lines are electric line. buried utility lines. homeowner-owned from the • Be careful when driving main to the home. It's the stakes into the ground for Homeowner gas line. homeowner's responsibility to tree or concrete supports know the sewer line's location Homeowner to avoid buried utilities. on his property. water line. • Contact the utility • A utility locator may paint a for instructions & Utility sewer line. Homeowner green "T" in the street to indicate questions regarding where the home's line connects sewer line. Utility water digging around a utility to the main line. line. line. • A utility locator may paint a green triangle to indicate that GAS LINES sewer lateral lines may exist in the • Gas main piping may area of the dig, but the triangle is be found in the street, not a designation of the lateral’s location. parkway, or right of way. COMMUNICATION LINES (PHONE/CABLE) • A utility locator may paint a green "S" on the • A utility locator will use yellow paint to mark • Main communication lines are generally buried curb to indicate the sewer line is located in that where the gas line runs underground from the under the sidewalk. approximate spot. street to the meter on a house, usually located • A utility locator will use orange paint to on the side of the garage. mark where the communication lines run If you don’t call 811 prior to digging • The homeowner is responsible for knowing the underground from the sidewalk to a house, and hit an underground utility line, you location of gas lines that run from the home's usually to the side of the garage. could potentially incur fines and be meter to other structures on the property, such responsible for repair costs! as to a BBQ or pool equipment. puc.nv.gov.
Recommended publications
  • Sloping and Benching Systems
    Trenching and Excavation Operations SLOPING AND BENCHING SYSTEMS OBJECTIVES Upon the completion of this section, the participant should be able to: 1. Describe the difference between maximum allowable slope and actual slope. 2. Observe how the angle of various sloped systems varies with soil type. 3. Evaluate layered systems to determine the proper trench slope. 4. Illustrate how shield systems and sloping systems interface in combination systems. ©HMTRI 2000 Page 42 Trenching REV­1 Trenching and Excavation Operations SLOPING SYSTEMS If enough surface room is available, sloping or benching the trench walls will offer excellent protection without any additional equipment. Cutting the slope of the excavation back to its prescribed angle will allow the forces of cohesion (if present) and internal friction to hold the soil together and keep it from flowing downs the face of the trench. The soil type primarily determines the excavation angle. Sloping a method of protecting employees from cave­ins by excavating to form sides of an excavation that are inclined away from the excavations so as to prevent cave­ins. In practice, it may be difficult to accurately determine these sloping angles. Most of the time, the depth of the trench is known or can easily be determined. Based on the vertical depth, the amount of cutback on each side of the trench can be calculated. A formula to calculate these cutback distances will be included with each slope diagram. NOTE: Remember, the beginning of the cutback distance begins at the toe of the slope, not the center of the trench. Accordingly, the cutback distance will be the same regardless of how wide the trench is at the bottom.
    [Show full text]
  • Earthwork Design and Construction
    Technical Fundamentals for Design and Construction April 6, 2020 Earthwork Design and Construction Key Points • The primary objectives of earthwork operations are: (1) to increase soil bearing capacity; (2) control shrinkage and swelling; and (3) reduce permeability. • Particle shape is a critical physical soil property influencing engineering modification of a soil. • Proper water content is essential to economically achieve specified soil density. Purpose and Scope of Earthwork The purpose and scope of earth construction differ for various types of constructed facilities. The major types of earthwork projects include: • Transportation projects, which require embankments, roadways, and bridge approaches. • Water control, which usually involves dams, levies, and canals. • Landfill closures, which need impervious caps. • Building foundations, which must support loads and limit soil movement by shrinkage and swelling. Properly modified soils are the most economical solution for many constructed facilities. To meet structural support requirements, soils at some project sites may require treatment such as the addition of water, lime, or cement. 1 Technical Fundamentals for Earthwork Design, Materials, and Resources The physical chemical properties of project site soils have a major influence on the design of earthen structures and on the resources and operations needed to properly modify a soil. The fundamental properties of a soil include: granularity, course to fine; water content; specific gravity; and particle size distribution. Other properties include permeability, shear strength, and bearing capacity. The engineering design of a soil seeks to provide sufficient bearing capacity, settlement control, and either limit, in the case of dams and landfill caps, the movement of water or facilitate the movement of water in the case of drains, such as behind retaining walls.
    [Show full text]
  • Failure of Slopes and Embankments Under Static and Seismic Loading
    American Scientific Research Journal for Engineering, Technology, and Sciences (ASRJETS) ISSN (Print) 2313-4410, ISSN (Online) 2313-4402 © Global Society of Scientific Research and Researchers http://asrjetsjournal.org/ Failure of Slopes and Embankments Under Static and Seismic Loading Nicolaos Alamanis* Lecturer, Dept. of Civil Engineering, Technological Educational Institute of Thessaly, Larissa, Greece, Civil engineer (National Technical University of Athens, D.E.A Ecole Centrale Paris) Email: [email protected] Summary The stability of slopes and embankments under the influence of static and seismic loads has been the subject of study for many researchers. This paper presents the mechanisms and causes of landslides as well as the forms of failure of slopes and embankments under static and seismic loading, with examples of failures from both Greek and international space. There is also mention to measures to protect and stabilize landslides, categories of slope stability analysis, and methods of seismic impact analysis. What follows is the determination of tolerable movements based on the caused damage on natural slopes, dams and embankments and an attempt is made to connect them with the vulnerability curves that are one of the key elements of stochastic seismic hazard. Particular importance is given to the statistical parameters of the mechanical characteristics of the sloping soil mass and to the simulation of random fields necessary for solving complex geotechnical works. Finally, we compare the simulation and description of random fields and the L.A.S. method is observed to be the most accurate of all simulation methods. The L.A.S. algorithm in conjunction with finite difference models can demonstrate the large fluctuations in the factor of safety values and the permanent seismic displacements of the slopes under the effect of seismic charges whose time histories are known.
    [Show full text]
  • Guideline on Landslide Treatment and Mitigation
    Guideline on Landslide Treatment and Mitigation Department of Soil Conservation and Watershed Management Department of Soil Conservation and Watershed Management G.P.O. BOX 4719, Babar Mahal, Kathmandu, Nepal Kathmandu, June 2016 T: 977-1-4220828/4220857 | F: 977-1-4221067 E: [email protected]/[email protected] (Asar 2073) W: www.dscwm.gov.np Guideline on Landslide Treatment and Mitigation Department of Soil Conservation and Watershed Management Kathmandu, June 2016 (Asar 2073) Publisher Department of Soil Conservation and Watershed Management, Ministry of Forests and Soil Conservation, Babar Mahal, Kathmandu, Nepal Cover photo credit Landslide in Rasuwa©Mr. Jagannath Joshi Credits © Department of soil Conservation and Watershed Management (DSCWM) Kathmandu, Nepal Landslide Treatment and Mitigation Sub-Group Coordinator: Mr. KesharMan Sthapit (FAO Nepal Office) Members: Mr. GehendraKeshariUpadhyaya (DSCWM) Dr. Jagannath Joshi (DSCWM) Mr. Deepak Bhardwaj (DSCWM) Mr. Shanmukhesh Chandra Amatya (Department of Water Induced Disaster Management) Ms. Laxmi Thagunna (Department of Environment) Ms. Racchya Shah (IUCN Nepal) Mr. Bhawani Shankar Dongol (WWF Nepal) Mr. Sanjay Devkota (Forum for Energy and Environment Development) Mr. Deo Raj Gurung (ICIMOD) Advisor: Mr. Purna Chandra Lal Rajbhandari (UNEP) Citation DSCWM (2016), Guideline on Landslide Treatment and Mitigation.Department of soil Conservation and Watershed Management, Kathmandu, Nepal. We are very thankful to USAID funded Hariyo Ban Program, WWF Nepal for providing support to edit, format and print this guideline. ii | Guideline on Landslide Treatment and Mitigation Guideline on Landslide Treatment and Mitigation | iii iv | Guideline on Landslide Treatment and Mitigation Preface The working group on “Landslide Treatment and Mitigation” was established following the recommendations of the consultative workshop on “Landslide Inventory, Risk Assessment, and Mitigation” organized by the Department of Soil Conservation and Watershed Management (DSCWM) from 28-29 September 2015 at Kathmandu.
    [Show full text]
  • Control and Inspection of Earthwork Construction
    PDHonline Course C284 (8 PDH) Control and Inspection of Earthwork Construction Instructor: George E. Thomas, PE 2012 PDH Online | PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658 Phone & Fax: 703-988-0088 www.PDHonline.org www.PDHcenter.com An Approved Continuing Education Provider www.PDHcenter.com PDH Course C284 www.PDHonline.org Control and Inspection of Structural Earthwork Construction George E. Thomas, PE A. Principles of Construction Control 1. General. In many types of engineering work, structural materials are manufactured to obtain certain characteristics; their use is prescribed by building codes, handbooks, and codes of practice established by various engineering organizations. However, for earth construction, the common practice is to use material that is available locally rather than specifying that a particular type of material of specific properties be secured. A variety of procedures exists by which earth materials may be satisfactorily incorporated into a structure. When earth is the construction material, personnel in charge of construction control must become familiar with design requirements and must verify that the finished product meets the requirements. Design of earth structures must allow for an inherent range of earth material properties. For maximum economy, tolerance ranges will vary according to available materials, conditions of use, and anticipated methods of construction. A closer relationship is required among the operations of inspection, design, and construction for earthwork than is needed in other engineering disciplines. Construction control of earth structures involves not only practices similar to those normally required for structures using manufactured materials, but also the supervision and inspection normally performed at the manufacturing plant.
    [Show full text]
  • Instructions for Digging a Test Hole for a Replacement Soil Evaluation
    1840 E. Gypsy Lane Road Bowling Green, OH 43402 419-354-2702 WoodCountyHealth.org Instructions For Digging A Test Hole For A Replacement Soil Evaluation The current State of Ohio Rules governing Home Sewage Treatment Systems [OAC 3701-29-07] requires that a completed soil evaluation be conducted on all properties which require a new or replacement septic system. This evaluation allows this department to determine a multitude of factors including but not limited to the following: type of soils present on site; depth to limiting layers (perched/apparent water table, depth to bedrock etc.). This information is then utilized to determine the type and size of septic system that will be required to be installed on your property. New construction sites require a test hole to be dug with a backhoe or excavator. In order to minimize the cost however, this department allows property owners to dig a test hole with the use of a shovel and post hole digger in order to conduct the required soil evaluation when a septic system replacement is required. The following is a set of instructions on how to complete the required test hole: 1. Use a standard shovel to dig a test hole 24” in diameter in the area of the proposed leach field replacement area. The test hole will be twelve inches (12”) deep. 2. Next, use a 4” standard post hole digger to dig the remainder of the hole to a depth of approximately 36” inside the larger 24” diameter hole. The soils removed from the center with the 4” post hole digger will be placed on the outside of the 24” diameter opening.
    [Show full text]
  • Slope Stabilization and Repair Solutions for Local Government Engineers
    Slope Stabilization and Repair Solutions for Local Government Engineers David Saftner, Principal Investigator Department of Civil Engineering University of Minnesota Duluth June 2017 Research Project Final Report 2017-17 • mndot.gov/research To request this document in an alternative format, such as braille or large print, call 651-366-4718 or 1- 800-657-3774 (Greater Minnesota) or email your request to [email protected]. Please request at least one week in advance. Technical Report Documentation Page 1. Report No. 2. 3. Recipients Accession No. MN/RC 2017-17 4. Title and Subtitle 5. Report Date Slope Stabilization and Repair Solutions for Local Government June 2017 Engineers 6. 7. Author(s) 8. Performing Organization Report No. David Saftner, Carlos Carranza-Torres, and Mitchell Nelson 9. Performing Organization Name and Address 10. Project/Task/Work Unit No. Department of Civil Engineering CTS #2016011 University of Minnesota Duluth 11. Contract (C) or Grant (G) No. 1405 University Dr. (c) 99008 (wo) 190 Duluth, MN 55812 12. Sponsoring Organization Name and Address 13. Type of Report and Period Covered Minnesota Local Road Research Board Final Report Minnesota Department of Transportation Research Services & Library 14. Sponsoring Agency Code 395 John Ireland Boulevard, MS 330 St. Paul, Minnesota 55155-1899 15. Supplementary Notes http:// mndot.gov/research/reports/2017/201717.pdf 16. Abstract (Limit: 250 words) The purpose of this project is to create a user-friendly guide focusing on locally maintained slopes requiring reoccurring maintenance in Minnesota. This study addresses the need to provide a consistent, logical approach to slope stabilization that is founded in geotechnical research and experience and applies to common slope failures.
    [Show full text]
  • Slope Stability
    Slope stability Causes of instability Mechanics of slopes Analysis of translational slip Analysis of rotational slip Site investigation Remedial measures Soil or rock masses with sloping surfaces, either natural or constructed, are subject to forces associated with gravity and seepage which cause instability. Resistance to failure is derived mainly from a combination of slope geometry and the shear strength of the soil or rock itself. The different types of instability can be characterised by spatial considerations, particle size and speed of movement. One of the simplest methods of classification is that proposed by Varnes in 1978: I. Falls II. Topples III. Slides rotational and translational IV. Lateral spreads V. Flows in Bedrock and in Soils VI. Complex Falls In which the mass in motion travels most of the distance through the air. Falls include: free fall, movement by leaps and bounds, and rolling of fragments of bedrock or soil. Topples Toppling occurs as movement due to forces that cause an over-turning moment about a pivot point below the centre of gravity of the unit. If unchecked it will result in a fall or slide. The potential for toppling can be identified using the graphical construction on a stereonet. The stereonet allows the spatial distribution of discontinuities to be presented alongside the slope surface. On a stereoplot toppling is indicated by a concentration of poles "in front" of the slope's great circle and within ± 30º of the direction of true dip. Lateral Spreads Lateral spreads are disturbed lateral extension movements in a fractured mass. Two subgroups are identified: A.
    [Show full text]
  • How to Solve the Digging Problem
    How to Solve the Digging Problem Digging is a normal behavior for most dogs, but may occur for widely varying reasons. Your dog may be: • seeking entertainment • seeking prey • seeking comfort or protection • seeking attention • seeking escape Dogs don’t dig, however, out of spite, revenge or a desire to destroy your yard. Finding ways to make the area where the dog digs unappealing may be effective, however, it’s likely that he’ll just begin digging in other locations or display other unacceptable behavior, such as chewing or barking. A more effective approach is to address the cause of the digging, rather than creating location aversions. Seeking Entertainment Dogs may dig as a form of self-play when they learn that roots and soil “play back.” Your dog may be digging for entertainment if: • He’s left alone in the yard for long periods of time without opportunities for interaction with you • His environment is relatively barren, without playmates or toys • He’s a puppy or adolescent (under three years old) and doesn’t have other outlets for his energy • He’s the type of dog (like a terrier) that is bred to dig as part of his “job” • He’s a particularly active type of dog (like the herding or sporting breeds) who needs an active job to be happy • He’s recently seen you “playing” in the dirt (gardening or working in the yard) Recommendations: We recommend expanding your dog’s world and increasing his “people time” the following ways: • Walk your dog regularly. It’s good exercise, mentally and physically, for both of you! • Teach your dog to fetch a ball or Frisbee and practice with him as often as possible.
    [Show full text]
  • Trenching Precautions to Take Before Trenching and Tips on Safety
    Safety Matters is intended to promote discussions of safety issues among underground construction professionals. You should always read and understand the operator’s manual before operating any equipment. For additional information, please e-mail [email protected]. INFORMATION/FACTS TOPIC: • Trench sides can cave in up to a distance of 3/4 x the depth of the trench. For example, if the trench is 4 feet (1.2 Trenching m) deep, the cave-in can start up to 3 feet (0.9 m) away from trench. POTENTIAL HAZARDS • Trenchers can react if the chain hits an underground • Caught in obstruction such as a tree branch or concrete footing. On • Struck by pedestrian machines, this can cause the handles to be • Laceration forced downward suddenly. • Drawn into • Machine will move when digging starts. • Buried hazards TALES FROM THE TRENCH • Falls onto • The injured was using a shovel on the right side of the digging chain to cave off the trench side and allow the PRECAUTIONS digging chain to pull soil from the trench. The accident • ALWAYS have all underground utilities located prior to occurred when the injured got too close and attempted to digging. Know and follow local regulations for excavating near step across the trench with his left leg. His foot slipped utilities. down the trench side and into the digging chain. His leg • Stay away and keep others at least 6 feet (1.8 m) away from was amputated below the knee and he had severe tissue machine and moving parts of machine. Stop machine if damage to his thigh.
    [Show full text]
  • Buckets 311–390 Hydraulic Excavators
    Cat® Buckets 311–390 HYDRAULIC EXCAVATORS FEATURES: Designed as an Integral Part of the Cat System Made to Last As Cat® Excavators continue to set industry standards Cat Buckets are designed and built to Caterpillar specifications in general, quarry and heavy construction applications, — guaranteeing quality and durability. Cat Buckets are continually enhanced to match machine High-strength tempered steel provides durability without performance and productivity improvements with each requiring thick, heavy plates and gives longer life and larger generation. payloads. Next Generation Cat Buckets have up to 50% more wear life when compared to Next Generation buckets feature enhanced geometry. Design popular competitors. changes allows the bucket to fill efficiently with each dig resulting in a smoother, faster dig cycle for improved cycle Cat Buckets offer optimal load distribution where they attach to times when used with E and D series excavators. the machine. Greater wear coverage and a new lift eye design are additional The shape of Cat Buckets is designed with optimal wear, features of Next Generation buckets. increased load-ability, and reduced maintenance as main considerations. Solutions A tremendous amount of research and world wide customer Performance feedback is integrated into each bucket design. Cat Hydraulic Excavators are the industry standard for construction, performance, power and versatility. Cat Excavator Customer-pleasing performance is at the heart of each bucket Buckets match the machine to the job and provide the best model. A wide range of standard and specialized excavator possible performance in your particular application. buckets are available with solutions for digging, excavating, loading and finishing. Whether quarry, construction site or landscaping — Cat Buckets focus the full power and performance of the machine on the Reliable task at hand and efficiently complete the task.
    [Show full text]
  • Sources for Lightweight Shale Aggregate in New Mexico
    BULLETIN 88 Sources for Lightweight Shale Aggregate in New Mexico by ROY W. FOSTER 1 9 6 6 STATE BUREAU OF MINES AND MINERAL RESOURCES NEW MEXICO INSTITUTE OF MINING & TECHNOLOGY CAMPUS STATION SOCORRO, NEW MEXICO NEW MEXICO INSTITUTE OF MINING & TECHNOLOGY Stirling A. Colgate, President STATE BUREAU OF MINES AND MINERAL RESOURCES Alvin J. Thompson, Director THE REGENTS MEMBERS Ex OFFICIO The Honorable Jack M. Campbell ....................... Governor of New Mexico Leonard DeLayo .................................... Superintendent of Public Instruction APPOINTED MEMBERS William G. Abbott ........................................................................... Hobbs Eugene L. Coulson, M.D. ............................................................. Socorro Thomas M. Cramer ....................................................................... Carlsbad Eva M. Larrazolo (Mrs. Paul F.) ......................................................... Albuquerque Richard M. Zimmerly .................................................................... Socorro For sale by the New Mexico Bureau of Mines and Mineral Resources Campus Station, Socorro, New Mexico 87801. $2.50 Contents ABSTRACT ............................................................................................................. 1 INTRODUCTION ................................................................................................ 2 Acknowledgments .............................................................................................. 3 Uses of expanded shale aggregate
    [Show full text]