Dupli-Color Catalogue
Total Page:16
File Type:pdf, Size:1020Kb
How To Find Your Colour Holts Dupli-Color automotive paints are acrylic based lacquers available in factory matched colours and general purpose items. This booklet contains the full list of car manufacturers’ colours covered by the range. To find the matching Holts Dupli-Color automotive paint for your car: 1. Look up the manufacturer of your car 2. Check the colour with year and manufacturer’s own code number 3. Note the Holts Dupli-Color colour part number 4. Note the recommended Holts Dupli-Color primer part number 5. The cap colour of each Holts Dupli-Color automotive paints show the approximate colour of the contents. COLOURS HIGHLIGHTED IN YELLOW ARE EXACT MATCHES, OTHERS ARE CLOSE MATCHES ONLY. ALL PAINTS SHOULD BE TESTED IN AN INCONSPICUOUS AREA AS SHADES MAY VARY. USE YOUR CAR MANUFACTURER PAINT CODE AS THE REFERENCE TO SELECT YOUR PAINT COLOUR. Cannot find your paint in the Catalogue? Holts Spraymatch System has over 15,000 colours available. Holts Spraymatch provides you with factory formula colours that deliver top of the line performance every time, even for advanced new colours. The result is a durable factory match finish from an economical alternative. To find your nearest stockist of Holts Spraymatch call: 1800 021 106. Your local stockist will custom mix your colour and custom fill any number of aerosols you need for your professional quality finish. Designed for the ultimate touch up for minor scratches to large jobs. Remember to apply Clear Coat over your repair if your car manufacturer specifies it. IMPORTANT FOLLOW CAN DIRECTIONS CAREFULLY. ALWAYS SPRAY INCONSPICUOUS TEST AREA BEFORE COMMENCING JOB. BEST APPLIED IN TEMPERATURES BETWEEN 15ºC AND 30ºC. DO NOT USE DURING HIGH HUMIDITY. HINTS ON SPRAYING TECHNIQUES AND PROCEDURES ARE LISTED ON PAGE 2 OF THIS BOOKLET. How to use Touch-Up Paints 1. Paint in good weather only, 15-30ºC and relative humidity less than 60%. 2. Surface to be sprayed must be absolutely clean and dry. Thoroughly remove all dirt, rust, oil, grease and silicone/polish/wash residue. Use degreasing solvent. Sand previously painted surfaces. 3. Mask surrounding areas to protect from overspray. 4. Bare Metal Surfaces and Aluminium: Spray with Etch Primer (fast drying and easy sanding) to re-establish original surface level. Rust Areas: Use Auto Zinc as an anti-rust primer that controls rust and seals the surface to protect against corrosion. (Colour coat should be applied within two hours or left for 48 hours.) Plastic Surfaces: Use Plastic Trim Primer prior to spraying a colour coat. Promotes adhesion to bumper bars and plastic body mouldings. 5. Shake can vigorously for two full minutes and after sound of agitator is heard (repeat at intervals during use to ensure paint remains thoroughly mixed). 6. Trial spraying on a similar surface to check colour match and spraying technique is suggested. 7. Hold can approximately 20-25cm from prepared surface and spray from side to side with light even strokes. DO NOT attempt to get complete coverage in one pass. Several light coats will prevent paint sag and runs. Allow 20 minutes between each coat. Each coat should be dry before re-coating. Metallic Paints: Overspray with 2-3 coats of Top Coat Clear to improve protection. 8. Allow 5-7 days for paint to harden, wash and polish the painted area. 9. After use, turn can upside down and spray until valve clears of paint. If spray-nozzle is clogged with excess paint, remove nozzle and soak in thinners for one minute. Top Coat Clear or COB (Clear Over Base) Top Coat Clear or COB is the top coat of a two part system consisting of a metallic base colour and clear top coat. The system gives improved protection against UV radiation and airborne pollutants. It applies to most metallics, all pearlescent, mica paints and fluorescent colours. The metallic, pearlescent and mica colours to which Top Coat Clear is applicable in the Holts DupliColor range are marked in the book with a tick (√). The caps on the can are also marked COB. Directions for using Top Coat Clear BASE COLOUR Spray as per directions on the can. Note that appropriate primer should be used. DS117/PS117 TOP COAT CLEAR HCT108-C CLEAR 1. Allow base colour to dry (20-30 minutes) 2. To achieve desired results several coats of Top Coat Clear will be required 3. Apply a light coat of Top Coat Clear and allow to dry for 20-30 minutes 4. Then apply additional full coats as required allowing each coat to dry for 20-30 minutes 5. Allow 7 days before waxing. For hints on how to spray paint, fix nicks and scratches and finding the right paint match, call 1800 021 106 for a leaflet Colour Car Manu- Year Colour- Autospray Autospray Primer Clear facturers’ touch 150g 400g Coat Code PRIMERS Scratch Filler & Primer DS116 White Primer DS107 PS107 Grey Primer HC107-C DS106 PS106 Auto Zinc DS113 PS113 Red Primer DS108 PS108 Etch Primer DS125 Plastic Trim Primer HCT109-C DS115 Filler Primer 312g FP101 GENERAL PURPOSE Brake Caliper Kit Red BCP400 Brake Caliper Kit Yellow BCP401 Brake Caliper Kit Racing Black Satin BCP402 Brake Caliper Kit Silver BCP403 Engine Paint with Ceramic Blue DE1601 Engine Paint with Ceramic Ford Red DE1605 Engine Paint with Ceramic Chev DE1607 Orange-Red Engine Paint with Ceramic Black DE1613 Engine Paint with Ceramic Aluminium DE1615 Engine Paint with Ceramic Chev Orange DE1620 Engine Paint with Ceramic Ford Semi DE1635 Gloss Black Engine Paint with Ceramic Plum Purple DE1640 Engine Paint with Ceramic Grabber Green DE1641 Engine Paint with Ceramic Daytona Yellow DE1642 Engine Paint with Ceramic Racing Green DE1644 Engine Paint with Ceramic Cast Coat Iron DE1651 Metalcast Anodized Base Coat MC100 Metalcast Anodized Red MC200 Metalcast Anodized Blue MC201 Metalcast Anodized Yellow MC202 Metalcast Anodized Green MC203 Metalcast Anodized Purple MC204 Metalcast Anodized Orange MC205 Metalcast Anodized Smoke MC206 GENERAL PURPOSE PAINTS CONTINUED ON NEXT PAGE Colour Car Manu- Year Colour- Auto- Autospray Primer Clear facturers’ touch spray 400g Coat Code 150g GENERAL PURPOSE Hi Heat with Ceramic Black 340g DH1602 Hi Heat with Ceramic White 340g DH1604 Hi Heat with Ceramic Aluminium 340g DH1606 Hi Heat with Ceramic Red 340g DH1608 Hi Heat with Ceramic Orange 340g DH1610 Hi Heat with Ceramic Blue 340g DH1612 Hi Performance Wheel Silver WP101 Hi Performance Wheel Graphite WP102 Hi Performance Wheel Bronze WP105 Hi Performance Vinyl Red 312g HVP100 Hi Performance Vinyl Yellow 312g HVP101 Hi Performance Vinyl Blue 312g HVP102 Hi Performance Vinyl Silver 312g HVP103 Crystal Clear Lacquer 340g DA1692 Instant Chrome CS101 Instant Gold GS100 High Gloss Black HCT106-C DS105 PS105 Matt Black HCT105-C DS112 PS112 Top Coat Clear HCT108-C DS117 PS117 Temporary Spray-on Shield Black BP100 Temporary Spray-on Shield Clear BP200 Silver - Bright Silver DS110 Fluorescent Pink DS120 Fluorescent Green DS121 Fluorescent Yellow DS122 Fluorescent Orange DS123 Appliance White HCT110-C For hints on how to spray paint, fix nicks and scratches and finding the right paint match, call 1800 021 106 for a leaflet Colour Car Manufactur- Year Colourtouch Autospray Autospray Primer Clear ers’ Code 150g 400g Coat ALFA ROMEO **to achieve final colour or a richer shine use Dupli-Color Top Coat Clear as per Colour Guide BEIGE/CREAM COLOURS Beige AR856 1986-88 DSC42 Grey BLUE COLOURS Blu Aurora 297/A 2005 DSH63 Grey √ Blu Sirio 441/B 1998-00 DSF82 Grey Blu Carabinieri AR372 1984-87 HCTF39-C Grey √ RED COLOURS Rosso Vigili AR542 1995 DSH69 Red Rosso Alfa AR557 1986-87 HCTH19-C Red SILVER/GREY COLOURS Grigio Ardesia 681 1985-88 DSSZ03 Grey √ Grigio Chiaro 737 1972-78 HCTT10-C DST48 Grey √ Argento Alfa 565/A 2005+ DST57 Grey √ Grigio Chiaro AR775 1988-95 HCTT10-C DST48 Grey √ WHITE COLOURS Arancio Polare 201/A 1997 HCTH2-C DSH53 PSH53 White Bianco 218/A 1999-03 HCTH2-C DSH53 PSH53 White ASTON MARTIN **to achieve final colour or a richer shine use Dupli-Color Top Coat Clear as per Colour Guide BLUE COLOURS Midnight Blue 0151 1977 HCTF39-C Grey √ BROWN/GOLD COLOURS Malvern Brown 0540 1983-89 DSF49 Red √ RED COLOURS York Red 0543 1983-89 DSF43 PSF43 Grey SILVERY/GREY COLOURS Solent Silver 1102 1998 HCTT14-C DST46 Grey √ AUDI **to achieve final colour or a richer shine use Dupli-Color Top Coat Clear as per Colour Guide BEIGE/CREAM COLOURS Mangogelb LY1E 1985-90 DSD27 Grey BLUE COLOURS Santorinblau LZ5K 1997-05 HCTH34-C DSH86 Grey √ Petrolblau M5V 1977-81 HCTHY6-C Grey √ Atlantikblau ZR5 2000-02 DSF58 Grey √ RED COLOURS Canyonrot LZ3G 2003+ DSC68 Grey √ Piemontrot/Crimson Red LZ3H 2002+ HCTF26-C DSF74 Red √ SILVER/GREY COLOURS Kristallsilber/Crystal Silver LY7T 1988-95 DST57 Grey √ WHITE COLOURS Antarctic White (Nissan) 911 1970-73 DSD06 White Pastelweiss L90D 1972-92 DSC01 White Alpinweiss L90E 1978-99 DSH66 White Casablanca LY9G 1995-01 DSF63 White The cap is an indication of the contents, please refer to catalogue for colour match. Colours highlighted in yellow are exact matches, others are close matches and should be test sprayed. Colour Car Manufactur- Year Colourtouch Autospray Autospray Primer Clear ers’ Code 150g 400g Coat BMW **to achieve final colour or a richer shine use Dupli-Color Top Coat Clear as per Colour Guide BEIGE/CREAM COLOURS Bahama Beige/ 10 1983-84 DSF52 PSF52 White Limestone (Ford) Pearl Beige 411 1998-03 DST59 Grey √ Bahama Beige/ 6096 1983-84 DSF52 PSF52 White Limestone (Ford) BLUE COLOURS Royalblau 198 1987-91 HCTH30-C DSH77 Grey √ Orientblau 317 1994 DSSZ02 Grey √ Indi Blue/Laser Blue 862 2001-03 DST60 Grey √ GREEN COLOURS Urgruen 271 1998-89 DSC69 Grey √ RED