5203 Electromagnet

Total Page：16

File Type：pdf, Size：1020Kb

5203 Electromagnet Features • Uniform Projected Field (± 1%) Above 0.85T • Interchangeable Poles • Small and Lightweight • Any Mounting Orientation • Fast Cycle Times Applications OVERVIEW • Spintronic Devices • Hall Effect Studies The 5203 Electromagnet is a projected field magnet • Magneto-Optical Studies providing perpendicular uniform field at a location above the magnet surface. It is intended for applications where the space around the working volume needs to be freely accessible. Poles are optimized for either peak field or uniform field. They are interchangeable and are available with an axial access bore. The 5203 can be mounted in any orientation and light weight (2.5kg) allows the magnet to be integrated into dynamic applications such as wafer testing. www.gmw.com [email protected] +1-650-802-8292 955 Industrial Road Revised March 26, 2020 San Carlos, California, USA Model 5203 General Specifications Mechanical Dimensions 74mm W x 74mm D x 123.5mm H Weight (excluding hoses and water) 2.5kg Field at Distance (5mm) from Face 0.5T over 4mm disc Field Orientation perpendicular to surface Field Uniformity 1%, 4mm x 4mm array (type A standard pole) Pole Face Diameter 24.4mm Routing of Water Hoses and base or side Electrical Cables Coils Resistance (20°C) 173mΩ Max. Resistance (80°C) 240mΩ Low Current Inductance 0.0035H High Current Inductance 0.0017H Max. Continuous Power (water) 63A, 18V, 1.1kW Max. Peak Power (water) 100A, 30V, 3kW Water Cooling (supply 18°C @15 psid) up to 8liters/min Safety Over Temperature Interlock Selco UP62-082C thermostat. Open circuit above 80°C coil temp Water Flow GEM FS380/168435 flow switch. 0.51 liters/min Diameter Sphere Containing 200mm 5G-surface (“fringe field”) Page 2 GENERAL DIMENSIONS MOUNTING DETAIL Magnet with 3mm Flux Plate Page 3 Excitation curves for the Bz field at 2mm, 5mm and 10mm above the pole face Variation of Bx and Bz fields at 5mm above pole face with radial distance Page 4 Bz field above the pole face along the z-axis APPLICATION NOTE 2: Field enhanced pole series An indication of the field strength increase that can be achieved when field uniformity requirements are relaxed. * Uniformity is measured over a disc of 4mm diameter located 0.2mm from the backing plate. Page 5 .

Copy Link

Recommended publications

Glossary Physics (I-Introduction)
1 Glossary Physics (I-introduction) - Efficiency: The percent of the work put into a machine that is converted into useful work output; = work done / energy used [-]. = eta In machines: The work output of any machine cannot exceed the work input (<=100%); in an ideal machine, where no energy is transformed into heat: work(input) = work(output), =100%. Energy: The property of a system that enables it to do work. Conservation o. E.: Energy cannot be created or destroyed; it may be transformed from one form into another, but the total amount of energy never changes. Equilibrium: The state of an object when not acted upon by a net force or net torque; an object in equilibrium may be at rest or moving at uniform velocity - not accelerating. Mechanical E.: The state of an object or system of objects for which any impressed forces cancels to zero and no acceleration occurs. Dynamic E.: Object is moving without experiencing acceleration. Static E.: Object is at rest.F Force: The influence that can cause an object to be accelerated or retarded; is always in the direction of the net force, hence a vector quantity; the four elementary forces are: Electromagnetic F.: Is an attraction or repulsion G, gravit. const.6.672E-11[Nm2/kg2] between electric charges: d, distance [m] 2 2 2 2 F = 1/(40) (q1q2/d ) [(CC/m )(Nm /C )] = [N] m,M, mass [kg] Gravitational F.: Is a mutual attraction between all masses: q, charge [As] [C] 2 2 2 2 F = GmM/d [Nm /kg kg 1/m ] = [N] 0, dielectric constant Strong F.: (nuclear force) Acts within the nuclei of atoms: 8.854E-12 [C2/Nm2] [F/m] 2 2 2 2 2 F = 1/(40) (e /d ) [(CC/m )(Nm /C )] = [N] , 3.14 [-] Weak F.: Manifests itself in special reactions among elementary e, 1.60210 E-19 [As] [C] particles, such as the reaction that occur in radioactive decay.
[Show full text]
Electromagnetism What Is the Effect of the Number of Windings of Wire on the Strength of an Electromagnet?
TEACHER’S GUIDE Electromagnetism What is the effect of the number of windings of wire on the strength of an electromagnet? GRADES 6–8 Physical Science INQUIRY-BASED Science Electromagnetism Physical Grade Level/ 6–8/Physical Science Content Lesson Summary In this lesson students learn how to make an electromagnet out of a battery, nail, and wire. The students explore and then explain how the number of turns of wire affects the strength of an electromagnet. Estimated Time 2, 45-minute class periods Materials D cell batteries, common nails (20D), speaker wire (18 gauge), compass, package of wire brad nails (1.0 mm x 12.7 mm or similar size), Investigation Plan, journal Secondary How Stuff Works: How Electromagnets Work Resources Jefferson Lab: What is an electromagnet? YouTube: Electromagnet - Explained YouTube: Electromagnets - How can electricity create a magnet? NGSS Connection MS-PS2-3 Ask questions about data to determine the factors that affect the strength of electric and magnetic forces. Learning Objectives • Students will frame a hypothesis to predict the strength of an electromagnet due to changes in the number of windings. • Students will collect and analyze data to determine how the number of windings affects the strength of an electromagnet. What is the effect of the number of windings of wire on the strength of an electromagnet? Electromagnetism is one of the four fundamental forces of the universe that we rely on in many ways throughout our day. Most home appliances contain electromagnets that power motors. Particle accelerators, like CERN’s Large Hadron Collider, use electromagnets to control the speed and direction of these speedy particles.
[Show full text]
Electromagnetism
EINE INITIATIVE DER UNIVERSITÄT BASEL UND DES KANTONS AARGAU Swiss Nanoscience Institute Electromagnetism Electricity and magnetism are two aspects of the same phenomenon: electromagnetism. A moving electric charge (in other words, an electric current) generates a magnetic field. Every electromagnet consists of a coil, which is nothing more than a tightly wound wire. Many electromagnets also have an iron core to make the magnetic field stronger. The more times the wire is wound around the coil, the stronger the magnetic field produced by the same current. Demonstration: Using electric current to create a magnetic field What you’ll need • a large sheet of paper on which to conduct the experiment • a sheet of stiff card or plexiglass • two batteries connected in series • a coil of copper wire • iron filings • crocodile clips (optional) • a small piece of iron (e.g. a screw) to place inside the coil (iron core) Instructions 1. Position the coil so that you can easily access the two ends of the wire and connect them to the battery. I used crocodile clips to attach them to the battery contacts, but you could also use wooden clothes pegs or electrical tape. 2. Connect the two batteries in series (+ - + - ). 3. Place the plexiglass or card over the coil. 4. When the electrical circuit is closed, slowly scatter the iron filings on top. What happens? The iron filings arrange themselves along the magnetic field lines. If you look closely, you can make out a pattern. Turn a screw into an electromagnet What you’ll need • a long iron screw or nail • two pieces of insulated copper wire measuring 15 and 30 cm • two three-pronged thumb tacks • a metal paperclip • a small wooden board • pins or paperclips • a 4.5 V battery Instructions Switch 1.
[Show full text]
Lecture 8: Magnets and Magnetism Magnets
Lecture 8: Magnets and Magnetism Magnets •Materials that attract other metals •Three classes: natural, artificial and electromagnets •Permanent or Temporary •CRITICAL to electric systems: – Generation of electricity – Operation of motors – Operation of relays Magnets •Laws of magnetic attraction and repulsion –Like magnetic poles repel each other –Unlike magnetic poles attract each other –Closer together, greater the force Magnetic Fields and Forces •Magnetic lines of force – Lines indicating magnetic field – Direction from N to S – Density indicates strength •Magnetic field is region where force exists Magnetic Theories Molecular theory of magnetism Magnets can be split into two magnets Magnetic Theories Molecular theory of magnetism Split down to molecular level When unmagnetized, randomness, fields cancel When magnetized, order, fields combine Magnetic Theories Electron theory of magnetism •Electrons spin as they orbit (similar to earth) •Spin produces magnetic field •Magnetic direction depends on direction of rotation •Non-magnets → equal number of electrons spinning in opposite direction •Magnets → more spin one way than other Electromagnetism •Movement of electric charge induces magnetic field •Strength of magnetic field increases as current increases and vice versa Right Hand Rule (Conductor) •Determines direction of magnetic field •Imagine grasping conductor with right hand •Thumb in direction of current flow (not electron flow) •Fingers curl in the direction of magnetic field DO NOT USE LEFT HAND RULE IN BOOK Example Draw magnetic field lines around conduction path E (V) R Another Example •Draw magnetic field lines around conductors Conductor Conductor current into page current out of page Conductor coils •Single conductor not very useful •Multiple winds of a conductor required for most applications, – e.g.
[Show full text]
Electromagnetism Fall 2018 (Adapted from Student Guide for Electric Snap Circuits by Elenco Electronic Inc.)
VANDERBILT STUDENT VOLUNTEERS FOR SCIENCE http://studentorgs.vanderbilt.edu/vsvs Electromagnetism Fall 2018 (Adapted from Student Guide for Electric Snap Circuits by Elenco Electronic Inc.) Here are some Fun Facts for the lesson Wind turbines generate electricity by using the wind to turn their blades. These drive magnets around inside coils of electric wire Electromagnets are used in junk yards to pick up cars and other heavy metal objects Electromagnetics are used in home circuit breakers, door bells, magnetic door locks, amplifiers, telephones, loudspeakers, PCs, medical imaging, tape recorders Magnetic levitation trains use very strong electromagnets to carry the train on a cushion of magnetic repulsion. Floating reduces friction and allows the train to run more efficiently. Materials 16 sets (of 2) D-batteries in holder 16 sets (of 2) nails wrapped with copper wire 1 nail has 50 coils and the other 10 coils 16 cases Iron fillings (white paper glued beneath for better visibility) 16 paper clips attached to each other 16 bags of 10 paper clips 16 circuit boards with: 4 # 2 snaps 1 # 1snap 1 # 3 snaps 1 electromagnet 1 switch 1 red and 1 black lead 1 voltmeter/ammeter 1 motor 1 magnet 1 red spinner (blade) 1 iron rod and grommet 16 simple motors 16 Transparent generators Observation sheet Divide class into 16 pairs. I. Introduction Learning Goals: Students understand the main ideas about magnets and electromagnets. A. What is a Magnet? Ask students to tell you what they know about magnets. Make sure the following information is included: All magnets have the same properties: All magnets have 2 magnetic poles.
[Show full text]
Electromagnet Designs on Low-Inductance Power Flow Platforms for the Magnetized Liner Inertial Fusion (Maglif) Concept at Sandia
2018 IEEE International Power Modulator and High Voltage Conference Contribution ID: 225 Type: Oral Presentation Electromagnet Designs on Low-Inductance Power Flow Platforms for the Magnetized Liner Inertial Fusion (MagLIF) concept at Sandia’s Z Facility* Wednesday, 6 June 2018 11:00 (30 minutes) Sandia National Laboratories is researching an inertial confinement fusion concept named MagLIF [1] –Mag- netized Liner Inertial Fusion. MagLIF utilizes Sandia’s Z Machine to radially compress a small cylindrical volume of pre-magnetized and laser-preheated deuterium fuel. These initial conditions appreciably relax the radial convergence requirements to realize fusion-relevant fuel conditions on the Z accelerator. The configu- ration of these experiments imposes unique design criteria on the external electromagnetic coils that are used to diffuse magnetic field into the Z target and bulky power flow conductors. Since 2013, several coildesigns have been fielded to magnetize the ~75cm3 target region to 10-15T while achieving field uniformity within1% in the fuel. These Helmholtz-like coil pairs require an extension of the Z vacuum transmission lines, raising total system inductance and limiting peak current to below 18MA. The MagLIF team will study scaling of fusion yield with increased drive current, magnetic field, and deposited laser energy. Planned experimental campaigns require parallel design efforts for Z-Machine power flow hardware and electromagnets to enable 15 – 20T fuel magnetization while simultaneously delivering 18-20 MA machine current. Simultaneous operation of 20 – 25T with 20 - 22MA is also in development. We present the design of a new coil that achieves these field levels in the reduced-inductance Z feed geometry.
[Show full text]
Make a Magnet Hands-On Activity
Make a Magnet Hands-On Activity Background Information In 1820, Danish physicist Hans Christian Oersted discovered that a compass was affected when a current flowed through a nearby wire. Not long after that, André Marie Ampëre discovered that coiled wire acted like a bar magnet when a current was passed through it. He also found that he could turn an iron rod into a temporary bar magnet when he coiled electric wire around the rod. In 1831, Michael Faraday proved that magnetism and electricity are related. He showed that when a bar magnet was placed within a wire coil, the magnet produced an electric current. In this activity, you are going to use electricity to turn a nail into an electromagnet. What You Need ♦ 4-inch iron or steel nail ♦ 24-inch piece of thin-gauge wire with 1-inch of insulation removed from each end ♦ D-cell flashlight battery ♦ 10 steel paperclips What To Do 1. Is the nail magnetic? See if you can use it to pick up the paper clips. Write your observations on the attached worksheet. 2. Wrap the center portion of the wire around the nail 10 times so that it forms a coil. You should have extra wire at both ends. 3. Attach one end of the wire to the (+) terminal of the battery. Then, attach the other end of the wire to the (-) terminal. 4. Is the electrified nail magnetic? Bring the end of it close to the paper clips, making sure that the wires stay attached to the battery. Write your observations on the worksheet.
[Show full text]
Electromagnetism
30 Quick questions: Answer these in your book Module 7 Electromagnetism FOUNDATION 1 Where are the magnetic forces strongest in a magnet? 2 What happens when two north poles are brought near each other? Knowledge Organiser 3 Which poles attract each other? 4 Is magnetism a contact or non-contact force? 5 What does a permanent magnet do that an electromagnet doesn’t? 6 A material that becomes a magnet when placed in a magnetic field is known as what? 7 Can induced magnetism be both attractive and repulsive? 8 Which metal is useful as an induced magnet? 9 Is steel a good choice to make an electromagnet? 10 How could you make an electromagnet in a school laboratory? 11 A region around a magnet where a force acts on another magnet or on a magnetic material is known as what? 12 What 3 elements can be magnetised? 13 Can a magnetic field repel a magnetic material? 14 What happens to the strength of a magnetic field as you move further away from a magnet? Name: 15 In which direction do magnetic field lines point? 16 What does a navigating compass contain? KEY WORDS/IDEAS TO REMEMBER 17 Why does a navigating compass work? 18 Draw the magnetic field lines around a bar magnet. Include arrows to show the direction of the field. Attract 19 How could you produce a magnetic field around a conducting Repel wire? 20 How is the strength of an electromagnet related to the current Induced magnet flowing through the wire? Permanent magnet 21 What is a solenoid? 22 How does making a coil (solenoid) out of a piece of wire affect the Poles strength of the magnetic
[Show full text]
Electromechanical Motion Fundamentals
Electromechanical Motion Fundamentals • Electric Machine – device that can convert either mechanical energy to electrical energy or electrical energy to mechanical energy – mechanical to electrical: generator – electrical to mechanical: motor – all practical motors and generators convert energy from one form to another through the action of a magnetic field • Transformer – device that converts ac electric energy at one voltage level to ac electric energy at another voltage level Sensors & Actuators in Mechatronics K. Craig Electromechanical Motion Fundamentals 1 – It operates on the same principles as generators and motors, i.e., it depends on the action of a magnetic field to accomplish the change in voltage level • Motors, Generators, and Transformers are ubiquitous in modern daily life. Why? – Electric power is: • Clean • Efficient • Easy to transmit over long distances • Easy to control • Environmental benefits Sensors & Actuators in Mechatronics K. Craig Electromechanical Motion Fundamentals 2 • Purpose of this Study – provide basic knowledge of electromechanical motion devices for mechatronic engineers – focus on electromechanical rotational devices commonly used in low-power mechatronic systems • permanent magnet dc motor • brushless dc motor • stepper motor • Topics Covered: – Magnetic and Magnetically-Coupled Circuits – Principles of Electromechanical Energy Conversion Sensors & Actuators in Mechatronics K. Craig Electromechanical Motion Fundamentals 3 References • Electromechanical Motion Devices, P. Krause and O. Wasynczuk, McGraw Hill, 1989. • Electromechanical Dynamics, H. Woodson and J. Melcher, Wiley, 1968. • Electric Machinery Fundamentals, 3rd Edition, S. Chapman, McGraw Hill, 1999. • Driving Force, The Natural Magic of Magnets, J. Livingston, Harvard University Press, 1996. • Applied Electromagnetics, M. Plonus, McGraw Hill, 1978. • Electromechanics and Electric Machines, S. Nasar and L. Unnewehr, Wiley, 1979.
[Show full text]
Electrical Engineering Dictionary
ratio of the power per unit solid angle scat- tered in a specific direction of the power unit area in a plane wave incident on the scatterer R from a specified direction. RADHAZ radiation hazards to personnel as defined in ANSI/C95.1-1991 IEEE Stan- RS commonly used symbol for source dard Safety Levels with Respect to Human impedance. Exposure to Radio Frequency Electromag- netic Fields, 3 kHz to 300 GHz. RT commonly used symbol for transfor- mation ratio. radial basis function network a fully R-ALOHA See reservation ALOHA. connected feedforward network with a sin- gle hidden layer of neurons each of which RL Typical symbol for load resistance. computes a nonlinear decreasing function of the distance between its received input and Rabi frequency the characteristic cou- a “center point.” This function is generally pling strength between a near-resonant elec- bell-shaped and has a different center point tromagnetic field and two states of a quan- for each neuron. The center points and the tum mechanical system. For example, the widths of the bell shapes are learned from Rabi frequency of an electric dipole allowed training data. The input weights usually have transition is equal to µE/hbar, where µ is the fixed values and may be prescribed on the electric dipole moment and E is the maxi- basis of prior knowledge. The outputs have mum electric field amplitude. In a strongly linear characteristics, and their weights are driven 2-level system, the Rabi frequency is computed during training. equal to the rate at which population oscil- lates between the ground and excited states.
[Show full text]
FOSS Electromagnetic Force Course Glossary NGSS Edition © 2019
FOSS Electromagnetic Force Course Glossary NGSS Edition © 2019 acceleration a change to an object’s speed (SRB) attract to pull toward each other (SRB, IG) automobile a wheeled vehicle propelled by a motor (SRB) battery a source of stored chemical energy (SRB, IG) brush a conductor that makes contact inside a motor or a generator (SRB, IG) circuit a pathway for the flow of electricity (SRB, IG) climate change the change of worldwide average temperature and weather conditions (SRB) closed circuit a complete circuit through which electricity flows (SRB) commutator a switching mechanism on a motor or generator (SRB, IG) compass an instrument that uses a free-rotating magnetic needle to show direction (SRB, IG) complete circuit a circuit with all the necessary connections for electricity to flow (SRB) component one item in a circuit (SRB, IG) compress to squeeze or press (SRB) conductor a material capable of transmitting energy, particularly in the forms of heat and electricity (SRB) constraint a restriction or limitation (SRB, IG) contact point the place on a component where connections are made to allow electricity to flow (SRB, IG) core in an electromagnet, the material around which a coil of insulated wire is wound (SRB, IG) criterion (plural: criteria) a standard for evaluating or testing something (SRB, IG) drag the resistance of air to objects moving through it (SRB) electric current the flow of electricity through a conductor (SRB, IG) electric force the force between two charged objects (SRB) electromagnet a piece of iron that becomes
[Show full text]
Electricity and Magnetism
ELECTRICITY AND MAGNETISM UNIT OVERVIEW We use electricity and magnetism every day, but how do they each work? How are they related? The Electricity and Magnetism unit explains electricity, from charged particles at the atomic level to the current that flows in homes and businesses. There are two kinds of electricity: static electricity and electric currents. There are also two kinds of electric currents: direct (DC) and alternating (AC). Electricity and magnetism are closely related. Flowing electrons produce a magnetic field, and spinning magnets cause an electric current to flow. Electromagnetism is the interaction of these two important forces. Electricity and magnetism are integral to the workings of nearly every gadget, appliance, vehicle, and machine we use. Certain reading resources are provided at three reading levels within the unit to support differentiated instruction. Other resources are provided as a set, with different titles offered at each reading level. Dots on student resources indicate the reading level as follows: low reading level middle reading level high reading level THE BIG IDEA Without electricity, we’d literally be in the dark. We’d be living in a world lit by open flame and powered by simple machines that rely on muscle power. Since the late 1800s, electricity has brightened our homes and streets, powered our appliances, and enabled the development of computers, phones, and many other devices we rely on. But people often take electricity for granted. Flip a switch and it’s there. Understanding what electricity is and how it becomes ready for our safe use helps us appreciate this energy source.
[Show full text]