DOCSLIB.ORG

INSTRUCTIONS 2 MODE D'emploi 33 BEDIENUNGSANLEITUNG 65 INSTRUCCIONES 97 129 2 WARNING CONTENTS 3 Read This Manual Carefully Before Using Your Camera

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
INSTRUCTIONS 2 MODE D'emploi 33 BEDIENUNGSANLEITUNG 65 INSTRUCCIONES 97 129 2 WARNING CONTENTS 3 Read This Manual Carefully Before Using Your Camera INSTRUCTIONS 2 MODE D'EMPLOI 33 BEDIENUNGSANLEITUNG 65 INSTRUCCIONES 97 129 2 WARNING CONTENTS 3 Read this manual carefully before using your camera. Indicates circumstances under which Names of parts 2. Exposure mode button ..............16 mishandling resulting from ignoring this symbol could result in personal injury or property Camera Body................................4 [ A ] Aperture Preferred Auto ....17 damage. Camera Body/LCD Panel ..............5 [ S ] Shutter Speed Preferred Auto Viewfinder Display........................6 ..................................................18 KEEP THE BATTERIES AWAY FROM FIRE. NEVER TRY TO DISASSEMBLE, RECHARGE, OR SHORT-CIRCUIT BATTERIES. Using the strap ................................6 [ M ] Manual Exposure ..............19 Diopter adjustment ..........................7 Flash photography KEEP THE BATTERIES OUT OF THE REACH OF CHILDREN. IF A CHILD Loading and checking the batteries ..7 in the Manual Exposure mode....20 SWALLOWS A BATTERY, CONTACT A DOCTOR IMMEDIATELY. Loading the film ..............................8 [ ] Exposure Compensation ........22 NEVER ATTEMPT TO DISASSEMBLE THE CAMERA; IT CONTAINS A HIGH- Taking pictures [ ] Spot Metering ..................24 VOLTAGE CIRCUIT. IF THE INTERNAL PARTS OF THE CAMERA ARE Programmed Auto (FULL AUTO)..9 [ ] Selftimer/ EXPOSED DUE TO DROPPING OR DAMAGE, REMOVE THE BATTERIES [] Remote Control(Optional) ....25 IMMEDIATELY TO PREVENT FURTHER USAGE. Focus Lock ................................10 Unloading the film ..........................10 [ ] Macro Shooting................26 IN CASE OF MALFUNCTION, CONSULT YOUR NEAREST OLYMPUS DEALER Taking Panorama pictures ..............11 [ ] Continuous Shooting........26 OR OLYMPUS SERVICE CENTER. (Panorama models only) Restoring the Programmed Auto Flash photography [FULL AUTO] mode ......................27 Symbols used in this manual: Setting the flash mode ..............11 Illuminating the LCD panel ............27 Auto Flash ..................................12 Correcting the date and time ..........28 [ ] Red-Eye Reduction Flash..13 Printing the date/time ....................29 Incorrect Manual operation Operation order Automatic operation [ ] Fill-In Flash ........................13 Care and storage ............................30 Exposure modes Specifications ................................31 1. Direct Mode Select buttons ........14 Accessories (optional)....................32 Order Attention Indicator on Indicator blinking [ ] Stop Action......................14 [ ] Portrait ..............................15 [ ] Landscape..........................15 Depress halfway Beep [ ] Night Scene ......................16 ț Pay particular attention to items in this manual enclosed in boxes . ț Products shown in pictures and illustrations may be slightly different from the actual unit. 4 NAMES OF PARTS — Camera Body NAMES OF PARTS — Camera Body/LCD Panel 5 Zoom button 1 Flash mode button 2 Selftimer/ remote control/ SPOT button Power switch/ flash release macro/ continuous shooting button Shutter release button 3 Exposure compensation/ manual exposure/ shutter speed button ț Flash Functions as shutter speed button Selftimer indicator/ only when the exposure modes remote control sensor & is set to “M”. 4 DATE MODE button 5 DATE SET/LIGHT Strap attachment stud (LCD panel illumination) button Lens barrel 6 Direct Mode Select buttons 7 FULL AUTO (programmed auto) Lens button 8 Shift lever Always try to keep this clean. Dirt and stains can 9 Exposure mode button result in pictures that are unclear and out-of-focus. 0 Battery check Wipe off any dirt or stains with a soft cloth. ! Red-Eye Reduction Flash @ Fill-In Flash Panorama lamp* # Remote Control $ Selftimer Viewfinder Panorama switch* % Spot Metering Diopter adjustment dial Strap attachment stud ^ Exposure Compensation & Exposure modes * Date/time indicator ( Mode status indicator Back cover release ) Programmed Auto (FULL AUTO) q Film window Aperture setting/ exposure compensation value LCD panel w Shutter speed e Continuous Shooting r Macro Shooting Mid-roll rewind button Battery compartment cover t Exposure counter Tripod socket *Panorama models only 6 NAMES OF PARTS — Viewfinder Display DIOPTER ADJUSTMENT 7 ț Standard mode Turn the diopter adjustment dial until the autofocus frame is clear. y Autofocus frame If you are nearsighted, turn the dial up. u Spot frame If you are farsighted, turn it down. i Panorama marks o Autofocus indicator ț LOADING AND CHECKING THE BATTERIES Panorama mode p (Panorama models only) Macro Q Flash Use two 3 V lithium batteries (CR123A or DL123A). W Shutter speed 1 1 2 4 6 E Aperture setting 5 R Spot 2 3 T ~ O 1)Indication of correct exposure, overexposure and underexposure in the Manual Exposure mode Turn the dial 1 on the battery 2)Indication of a corrected value in the Exposure compartment cover to . Hold Insert the batteries 4 correctly. Compensation mode the notch 2 with your fingertip. Close the battery compartment Open the cover 3 . cover 5. Turn the dial 6 to USING THE STRAP to lock the cover. Make sure the power switch ț Attach the strap as shown. is set to OFF before opening 3 the battery compartment cover. 7 Set the power switch 7 to ON to check the remaining battery power. 1 2 lights (turns off automatically). Batteries are OK. You can shoot. 3 blinks and other indicators are Batteries are low and should be displayed normally. replaced with new ones. Secure the strap Batteries are dead and should be blinks and other indicators go out. with the clasp. replaced with new ones immediately. 8 9 LOADING THE FILM TAKING PICTURES — Programmed Auto (FULL AUTO) 1 2 1 Set the power switch to ON. The lens will extrude and the LCD panel 2 1 will turn on. Compose your shot. Press the “T” side of the zoom button for Insert the film cartridge. telephoto (140 mm) or the “W” side for wide angle (28 mm). Shutter curtain Be careful not to touch the shutter curtain or Panorama Slide the back cover release After about 30 seconds of inactivity, the LCD panel goes out. upward to open the back cover. masks. Do not look at the sun or other strong light sources 3 Correct through the viewfinder. 2 Autofocus frame 3 Incorrect Place the film between the positioning guides (A), aligning the film leader in the direction of the arrow. 4 5 Position the autofocus frame Press the shutter release button on your subject. halfway to focus on the subject. After making sure that the If the autofocus indicator camera beeps and the autofocus blinks, the shutter cannot be indicator lights in the released. viewfinder, press the shutter The distance to your subject release button all the way to Close the back cover. The Make sure the exposure is 0.6 m (2.0 ft) to infinity at take the picture. After the film automatically advances counter on the LCD panel the wide-angle side and 0.9m shutter is released, the film to the first frame. Set the reads “ ”. (3.0 ft) to infinity at the automatically advances to the power switch to ON. telephoto side. next frame. If “ ” blinks, reload the film. 10 11 TAKING PICTURES — Focus Lock TAKING PANORAMA PICTURES (Panorama models only) If you want to position your main subject outside the center of the frame, follow the procedure below (focus lock). 1 Autofocus frame 2 Standard mode Panorama mode Set the Panorama switch down for Panorama mode shooting (the Panorama lamp lights). Set the switch up for Standard mode shooting. In the Panorama mode, only the area inside the shaded section (see illustration) will appear in the picture. (Non-shaded areas will not Position the autofocus frame on Reframe your subject while be in the picture). ț After the shutter has been released in the Panorama mode, the your subject and press the shutter keeping the shutter release button Panorama lamp blinks for about 5 seconds. release button halfway. pressed halfway. ț Date and time cannot be imprinted in the Panorama mode. The camera beeps, and the Then press the shutter release button autofocus indicator lights in the all the way. viewfinder. The exposure is also — Setting the Flash Mode locked at this time (AE lock). FLASH PHOTOGRAPHY 1 2 UNLOADING THE FILM The camera automatically rewinds the film when you reach the end of a roll. You can also rewind the film before it reaches the end. Rewinding the film before the Set the power switch to to flip up the end of the roll flash. The camera will recharge the Press the / button to flash, and the flash will be ready to select the flash mode. The use. When there is insufficient light, selected mode is displayed the flash fires automatically. on the LCD panel. Mode display Flash mode Function No Automatically fires in the dark, with backlighting, or Auto Flash display under fluorescent lighting. Red-Eye Significantly reduces the phenomenon of “red-eye” Make sure the motor has Press the mid-roll rewind Reduction (when a subject’s eyes appear red in color stopped and that“ ”is blinking; button. Do not use an Flash photography). then open the back cover to instrument with a sharp tip. remove the film. Fill-In Fires regardless of available light. 12 13 FLASH PHOTOGRAPHY — Red-Eye Reduction Flash ț When is blinking in the viewfinder, the flash is being recharged In this mode, the camera emits a series of pre-flashes before the main flash (for about 0.2 to 4 seconds with fresh batteries.) and the shutter activates. This helps minimize the “red-eye” phenomenon (when a subject’s cannot be released. eyes are illuminated by the flash and appear red in a color photograph). ț When the flash fires in the Programmed Auto (FULL AUTO) mode, the shutter speed is automatically set at 1/100-sec. ț When the shutter release button is pressed halfway, the autofocus auxiliary light (flash) may flicker several times. Press the button fully for main flash activation. ț If is blinking in the viewfinder when the flash is not flipped up, use of the flash is recommended. ț ț Do not fire the flash right in front of the eyes of people and Hold the camera securely. It takes about 1 second until the shutter animals. releases. ț ț Do not point the camera at a motorist and fire the flash.
Load more

Recommended publications
  • Introduction to Metering on a DSLR
    Getting more from your Camera Topic 4 - Introduction to Metering on a DSLR Learning Outcomes In this lesson, we will look at another important feature on a DSLR camera called “Metering Mode”. By the end of this lesson, you will have a better idea of the role that metering plays when thinking about exposure in your photography. Page | 1 Introduction to Metering on a DSLR Introduction to Metering “Metering Mode” may also be called “Camera Metering”, “Exposure Metering” or even “Metering”. One of the things that might have already frustrated you is a scenario in which some photographs come out too bright or, in some cases, too dark. By understanding the metering modes, you will be better equipped to tackle this. Let us first talk about what metering is, before moving on to see how it works and how you can use your understanding of it, to enhance your photography. 1) What is Metering? Metering, in its simplest meaning, is basically how your camera determines what the correct shutter speed and aperture should be, depending on the amount of light that goes into the camera and the sensitivity of the sensor. In the age of digital technology, we are fortunate enough that every DSLR camera is built with an integrated light meter. This device is clever in that it automatically measures the reflected light and determines the optimal exposure. It’s important to look at the most common metering modes that are found in digital cameras today: 1. Matrix Metering (Nikon), also known as Evaluative Metering (Canon) 2. Center-weighted Metering 3.
    [Show full text]
  • EXIF: a Format Is Worth a Thousand Words
    NATIONAL LAW ENFORCEMENT AND CORRECTIONS TECHNOLOGY CENTER A program of the Office of Justice Programs’ National Institute of Justice From Winter 2007 TechBeat TECH b • e • a • t Dedicated to Reporting Developments in Technology for Law Enforcement, Corrections, and Forensic Sciences EXIF: A Format Is Worth A Thousand Words he National Center for Missing & Exploited Children if they are used only to open the file. If, however, these T revealed in a June 2005 study that 40 percent of arrest- programs are used to modify an image, they can destroy ed child pornography possessors had both sexually the Exif data. victimized children and were in possession of child pornog- The most important data may be the thumbnail image raphy. Due in part to the increasing prevalence of child exploitation and pornography, the digital photograph has linked to the photograph. Thumbnails are saved in their now become a fixture in gathering and examining forensic own hidden file (a thumbs.db file placed in folders con- evidence in such cases. taining images on the computer), and changes to an image may not always transfer to the corresponding Investigators who frequently handle child pornogra- thumbnail. If an original image is wiped from a disk using phy cases usually have (or know where to access) the a program such as Secure Clean™ or BCWipe®, the thumb- tools and the knowledge to obtain evidence associated nail may still be available. Officers have encountered situ- with contraband images. Nevertheless, law enforcement ations in which the victim’s or perpetrator’s face was officers who do not handle these cases on a regular basis blurred or concealed in the full image, but the thumbnail may be unaware of the important data that can be depicted an older version that revealed the obscured derived from digital images.
    [Show full text]
  • Understanding Metering and Metering Modes
    Understanding Metering and Metering Modes Every modern DSLR has something called “Metering Mode”, also known as “Camera Metering”, “Exposure Metering” or simply “Metering”. Knowing how metering works and what each of the metering modes does is important in photography, because it helps photographers control their exposure with minimum effort and take better pictures in unusual lighting situations. In this understanding metering modes article, I will explain what metering is, how it works and how you can use it for your digital photography. What is Metering? Metering is how your camera determines what the correct shutter speed and aperture should be, depending on the amount of light that goes into the camera and the ISO. Back in the old days of photography, cameras were not equipped with a light “meter”, which is a sensor that measures the amount and intensity of light. Photographers had to use hand-held light meters to determine the optimal exposure. Obviously, because the work was shot on film, they could not preview or see the results immediately, which is why they religiously relied on those light meters. Today, every DSLR has an integrated light meter that automatically measures the reflected light and determines the optimal exposure. The most common metering modes in digital cameras today are: 1. Matrix Metering (Nikon), also known as Evaluative Metering (Canon) 2. Center-weighted Metering 3. Spot Metering Some Canon EOS models also offer “Partial Metering”, which is similar to Spot Metering, except the covered area is larger (approximately 8% of the viewfinder area near the center vs 3.5% in Spot Metering).
    [Show full text]
  • Intro to Digital Photography.Pdf
    ABSTRACT Learn and master the basic features of your camera to gain better control of your photos. Individualized chapters on each of the cameras basic functions as well as cheat sheets you can download and print for use while shooting. Neuberger, Lawrence INTRO TO DGMA 3303 Digital Photography DIGITAL PHOTOGRAPHY Mastering the Basics Table of Contents Camera Controls ............................................................................................................................. 7 Camera Controls ......................................................................................................................... 7 Image Sensor .............................................................................................................................. 8 Camera Lens .............................................................................................................................. 8 Camera Modes ............................................................................................................................ 9 Built-in Flash ............................................................................................................................. 11 Viewing System ........................................................................................................................ 11 Image File Formats ....................................................................................................................... 13 File Compression ......................................................................................................................
    [Show full text]
  • Nikon D5100: from Snapshots to Great Shots
    Nikon D5100: From Snapshots to Great Shots Rob Sylvan Nikon D5100: From Snapshots to Great Shots Rob Sylvan Peachpit Press 1249 Eighth Street Berkeley, CA 94710 510/524-2178 510/524-2221 (fax) Find us on the Web at www.peachpit.com To report errors, please send a note to [email protected] Peachpit Press is a division of Pearson Education Copyright © 2012 by Peachpit Press Senior Acquisitions Editor: Nikki McDonald Associate Editor: Valerie Witte Production Editor: Lisa Brazieal Copyeditor: Scout Festa Proofreader: Patricia Pane Composition: WolfsonDesign Indexer: Valerie Haynes Perry Cover Image: Rob Sylvan Cover Design: Aren Straiger Back Cover Author Photo: Rob Sylvan Notice of Rights All rights reserved. No part of this book may be reproduced or transmitted in any form by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the publisher. For information on getting permission for reprints and excerpts, contact permissions@ peachpit.com. Notice of Liability The information in this book is distributed on an “As Is” basis, without warranty. While every precaution has been taken in the preparation of the book, neither the author nor Peachpit shall have any liability to any person or entity with respect to any loss or damage caused or alleged to be caused directly or indirectly by the instructions contained in this book or by the computer software and hardware products described in it. Trademarks All Nikon products are trademarks or registered trademarks of Nikon and/or Nikon Corporation. Many of the designations used by manufacturers and sellers to distinguish their products are claimed as trademarks.
    [Show full text]
  • E-300 Advanced Manual
    E-300AdEN-Cover 04.10.22 11:43 AM Page 1 Basic operations DIGITDIGITALAL CAMERA Things to know before shooting http://www.olympus.com/ Selecting the right mode for shooting conditions ADVANCED MANUAL ADVANCED ADADVANCEDVANCED MANUMANUALAL Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjuku-ku, Tokyo, Japan Various shooting functions Focusing functions Two Corporate Center Drive, PO Box 9058, Melville, NY 11747-9058, U.S.A. Tel. 1-631-844-5000 Exposure, image and color Technical Support (USA) 24/7 online automated help: http://www.olympusamerica.com/E1 Phone customer support: Tel. 1-800-260-1625 (Toll-free) Playback Our phone customer support is available from 8 am to 10 pm (Monday to Friday) ET Customizing the settings/ E-Mail: [email protected] functions of your camera Olympus software updates can be obtained at: http://www.olympus.com/digital Printing Premises: Wendenstrasse 14-18, 20097 Hamburg, Germany Transferring images to a Tel. +49 40 - 23 77 3-0 / Fax +49 40 - 23 07 61 computer Goods delivery: Bredowstrasse 20, 22113 Hamburg, Germany Letters: Postfach 10 49 08, 20034 Hamburg, Germany Appendix European Technical Customer Support: Please visit our homepage http://www.olympus-europa.com or call our TOLL FREE NUMBER*: 00800 - 67 10 83 00 Information for Austria, Belgium, Denmark, Finland, France, Germany, Italy, Luxemburg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom * Please note some (mobile) phone services/provider do not permit access or request an additional prefix to +800 numbers. For all not listed European Countries and in case that you can’t get connected to ● Thank you for purchasing an Olympus digital camera.
    [Show full text]
  • A Simple Guide to Help You Learn Your Camera So You Can Enjoy Your Time Outdoors
    Low Light Wildlife & Nature Photography A simple guide to help you learn your camera so you can enjoy your time outdoors T RENT SIZEMORE PHOTOGRAPHY Introduction ABOVE: ISO 500 - ƒ/5.0 - 1/200s In order to understand how to Dark clouds, shadows, and dim lights all make for difficult exposures that expose correctly in low light can push the limits of your camera and lens. There is always a situations, you’ll need to compromise between enough light to freeze the action through shutter understand the three aspects of exposure and how far you can push speed and keeping an ISO with an acceptable level of noise and grain. each one to your camera’s limits. By grasping the concepts of exposure in low lighting or difficult lighting situations, you’ll be able to cameras are great at exposing but gives more preference to what’s get the “correct” exposure for any correctly for most scenes you’ll in the center of the scene. If you scene you may encounter. I say encounter, but when you can have something really bright on the “correct” because nothing is set in manually expose using each of the edges of the scene, center-weighted stone. There may be a technically camera settings, you’ll be able to can be helpful for a better exposure. correct exposure for a given scene, fine-tune the exposure to take but you can creatively expose to get advantage of the different attributes Spot metering only measures a the image you want. When you of the light you see.
    [Show full text]
  • IMAGE SIZE and IMAGE QUALITY Image Size and Quality Are Set in Section 1 of the Recording Menu (P
    IMAGE SIZE AND IMAGE QUALITY Image size and quality are set in section 1 of the recording menu (p. 64). Changes are displayed on the monitor. L L: 3008 X 2000 (Large) M M: 2256 X 1496 (Medium) S S: 1504 X 1000 (Small) RAW RAW image RAW+ RAW & JPEG image X.FIN Extra fine: JPEG image FINE Fine: JPEG image STD. Standard: JPEG image Image size affects the number of pixels in each image. The greater the image size, the larger the file size. Choose image size based on the final use of the image - smaller images are more suitable for web sites whereas larger sizes produce higher quality prints. Image quality controls the file type and rate of compression. RAW is high-quality image file. The extra fine, fine, and standard settings produce JPEG files at various rates of compression. The higher the image quality, the lower the rate of compression and the larger the file sizes. If economical use of the memory card is important, use the standard mode. The RAW & JPEG option creates two image files at one time, a large RAW file and a fine quality JPEG file with an image size selected with the menu. The image files are saved with the same file name, but with different extensions (p. 126). In the RAW image-quality mode, the image size is set to large and cannot be changed. The image size is not be displayed on the monitors. The enlarged playback and print functions cannot be used. Unlike the other image-quality modes, RAW image data is unprocessed and requires image processing before it can be used.
    [Show full text]
  • (DSLR) Cameras
    Optimizing Radiometric Fidelity to Enhance Aerial Image Change Detection Utilizing Digital Single Lens Reflex (DSLR) Cameras Andrew D. Kerr and Douglas A. Stow Abstract Our objectives are to analyze the radiometric characteris- benefits of replicating solar ephemeris (Coulter et al., 2012, tics and best practices for maximizing radiometric fidel- Ahrends et al., 2008), specific shutter and aperture settings ity of digital single lens reflex (DSLR) cameras for aerial (Ahrends et al., 2008, Lebourgeois et al., 2008), using RAW image-based change detection. Control settings, exposure files (Deanet al., 2000, Coulter et al., 2012, Ahrends et al., values, white balance, light metering, ISO, and lens aper- 2008, Lebourgeois et al., 2008), vignetting abatement (Dean ture are evaluated for several bi-temporal imagery datasets. et al., 2000), and maintaining intra-frame white balance (WB) These variables are compared for their effects on dynamic consistency (Richardson et al., 2009, Levin et al., 2005). range, intra-frame brightness variation, acuity, temporal Through this study we seek to identify and determine how consistency, and detectability of simulated cracks. Test- to compensate and account for, the photometric aspects of im- ing was conducted from a terrestrial, rather than airborne age capture and postprocessing with DSLR cameras, to achieve platform, due to the large number of images collected, and high radiometric fidelity within and between digital multi- to minimize inter-image misregistration. Results point to temporal images. The overall goal is to minimize the effects of exposure biases in the range of −0.7 or −0.3EV (i.e., slightly these factors on the radiometric consistency of multi-temporal less than the auto-exposure selected levels) being preferable images, inter-frame brightness, and capture of images with for change detection and noise minimization, by achiev- high acuity and dynamic range.
    [Show full text]
  • Operating Instructions Q Operating Instructions
    EXPOSURE METER Operating Instructions q Operating instructions SAFETY PRECAUTIONS This manual uses the following safety labels for AWARNING and ACAUTION that you must follow. /b WARNING Indicates hazards or unsafe practices that can result in severe personal injurry or death. ACAUTION Indicates hazards or unsafe practices that can rresult in personal injury or damage to your L-308Bll exposure meter. (CAUTIONI Indicates an operation note or limitation you must use. Please read the notes to avoi d an incorrect L-308BII operation. NOTE(S) Provides the reference information and related functions that are useful for your L-308Bll operations. /bA WARNING &ZAUTlON CONTENTS SAFETY PRECAUTIONS .......................................................................................... i CONTENTS .................................................................................................................... ii 1. Parts Designations ...................................................................................... 2. Display ................................................................................................................... 2 2.1 LCD panel .................................................................................................................................. 2 3. Mode Selection ................................................................................................ 3 3.1 Switching between incident light metering and reflected light metering ........... 3 3.2 How to fit the Lumidisc ........................................................................................................................
    [Show full text]
  • (EXIF) File Headers in Digital Evidence Analysis Special Agent Paul Alvarez Air Force Office of Special Investigations, Computer Investigations and Operations
    International Journal of Digital Evidence Winter 2004, Volume 2, Issue 3 Using Extended File Information (EXIF) File Headers in Digital Evidence Analysis Special Agent Paul Alvarez Air Force Office of Special Investigations, Computer Investigations and Operations Abstract An obstacle in any Child Pornography (CP) investigation is the investigator’s ability to determine whether the pictures in question have been altered. Because of the court ruling in Ashcroft v. Free Speech, many agents are asked on the stand if they can prove the pictures they recovered were altered in any way. If the picture doesn’t match any known CP hashes, then it can be very difficult to prove they are untouched. One way an investigator may be able determine if a picture is authentic is through extraction of metadata. In the case of digital pictures, they may contain EXIF headers that can help the investigator to verify the authenticity of a picture. Introduction In the Supreme Court case of John D. Ashcroft, United States Attorney General v. The Free Speech Coalition, the court ruled that modified pictures (pictures that were edited, morphed or created to look like child pornography) were protected under the First Amendment of the Constitution [1]. The court felt that because a real child was not harmed the pictures are protected by the freedom of speech. This may create additional hurdles for investigators. With the use of hash databases compiled by law enforcement, it is possible to find previously identified CP on digital media. But how can we verify the remaining pictures? What if the person under investigation was taking pictures of a victim not previously identified by law enforcement? One way to help verify the authenticity of a picture is through the use of metadata.
    [Show full text]
  • User's Manual
    DIGITAL CAMERA User’s Manual No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. En Printed in Thailand En 6MB01311-01 Trademark Information • Microsoft and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc. • Adobe and Acrobat are registered trademarks of Adobe Systems Inc. • The SD logo is a trademark of the SD Card Association. • The SDHC logo is a trademark. • PictBridge is a trademark. • All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders. Introduction First Steps Basic Photography a, b, c, and d Modes Changing Shooting Settings More on Playback Connecting to a Computer, Printer, or TV Menu Guide Optional Accessories Maximizing the Life of the Camera Technical Notes i For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them. The consequences that could result from failure to observe the precautions listed in this section are indicated by the following symbol: This icon marks warnings. To prevent possible injury, read all warnings before using this Nikon product. WARNINGS Keep the sun out of the frame Do not place the strap around the neck of Keep the sun well out of the frame when an infant or child shooting backlit subjects.
    [Show full text]