Artefact Series II Door Furniture MS0575

ASSA ABLOY, the global leader in door opening solutions AAA-CAT-039 Contents

Lockwood Door Furniture Handing Convention 2

Square Corner Plates 3

10mm Radius Corner Plates 5

Round End Plates 6

Square End Plates 7

Round Rose Furniture 8

Square Rose Furniture 9

218/219 10mm Radius Corner Push/Pull Plates 10

216/217 10mm Radius Corner Push/Pull Plates 11

214/215 10mm Radius Corner Push/Pull Plates 12

206/207 Series Push & Pull Plates 13

208/209 Series Push & Pull Plates 14

Pull Handles 15

Stainless Steel Pull Handles with Rose 16

Finishes 17

Limiting Dimensions for Lever/Knob Selections 18

Legend 19

Ordering Procedure 20 Artefact Series II Door Furniture Lockwood Catalogue

The distinguished range of Artefact in Aluminium, Brass and Stainless Steel, offers architects and specifiers a complete range of slim line, door furniture plates.

Suitable for use in public, commercial, industrial and institutional buildings, where there is a need for high grade and durable fittings.

Artefact range of door furniture plates offers a selection of functions with engraving available to suit most requirements.

Lever 200 Series

Plates Engraving

Pull Handle & Plates 1 Artefact Series II Door Furniture

Lockwood Door Furniture Handing Convention Applicable for all Artefact Series II Plates.

Internal Internal Lever Assembly Lever Assembly INSIDE

Right Hand Door Left Hand Door

External External Lever Assembly Lever Assembly

OUTSIDE

INSIDE Internal Internal Lever Assembly Lever Assembly

Right Hand Door Left Hand Door

External OUTSIDE External Lever Assembly Lever Assembly

Example

INSIDE Internal Internal Lever Assembly Lever Assembly 20305NN/96L 20305NN/96R

Right Hand Door Left Hand Door

External OUTSIDE External Lever Assembly Lever Assembly 20201NA/96R 20201NA/96L

1300 LOCK UP (1300 562 587) lockweb.com.au 2 Artefact Series II Door Furniture Lockwood Catalogue

Square Corner Plates The 200 Series Door Furniture is 162mm square with square corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding FIRE RATED countersunk holes and are fixed back to back through the door. S3 HIGH SECURITY

Application DURABILITY Designed for use with Lockwood 3570 Series Mortice Locks; Latches and Push and Pull doors. ANTI-CORROSION

Features & Specifications Dimensions 162 x 162 x 3mm – Aluminium 162 x 162 x 2mm – Stainless Steel and Brass

Materials Aluminium, Brass and Stainless Steel

Door Thickness 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.

NOTE: When using flush pulls back to back the Levers and Knob to Suit minimum door thickness is 40mm. Brass levers and knobs also available refer page 18. 20 8*8 69 89 Finishes *Aluminium Only Standard Pull Handle to Suit Natural Anodised Aluminium NT 11 1257 16*58 Satin Stainless Steel SS Aluminium Stainless Steel

Non-Standard Plates Refer to page 17

Ordering Procedure 20000NA 20100NA NN20002 20006NN 20106NNAN01002 20013NN 20138NN The 200 Series is ordered to suit right or left handed doors. It is necessary to 20007AN 20007CN NE70002 20007FN 20007NN NN70102 specify the furniture plate and finish code, eg 20001NA/96LNT.

20001NA 20101NA NN30002 20004NN 20104NN NN41002 20020NA 20120NA 162 23

162 20005NN 20105NN 20022NN 20122NN 20139NN

48.7

28.6 SS/Brass Aluminium 20024NN/75* 20124NN/75* 20025NA/75* 20125NA/75* 20027NN/75* 20127NN/75* 20028NN/75* 20142NN/75*

20024AN/75* 20024CN/75* 20024EN/75* 20024GN/75* 20031NN 20131NN 20032NA 20132NA 20035NN 20134NN

Legend Cylinder Hole Slotted Button LED

Turn-Snib Disabled Indicating Slotted Button

3 Artefact Series II Door Furniture

1300 LOCK UP (1300 562 587) lockweb.com.au 4 Artefact Series II Door Furniture Lockwood Catalogue

10mm Radius Corner Plates The 202 Series Door Furniture is 162mm square with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have FIRE RATED corresponding countersunk holes and are fixed back to back through the door. S3 HIGH SECURITY

Application DURABILITY Designed for use with Lockwood 3570 Series Mortice Locks; Latches and Push and Pull doors. ANTI-CORROSION

Features & Specifications Dimensions 162 x 162 x 3mm – Aluminium 162 x 162 x 2mm – Stainless Steel and Brass

Materials Aluminium, Stainless Steel and Brass.

Door Thickness 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.

NOTE: When using flush pulls back to back the Levers and Knob to Suit minimum door thickness is 40mm. Brass levers and knobs also available refer page 18. 20 8*8 69 89 Finishes *Aluminium Only Standard Pull Handle to Suit Natural Anodised Aluminium NT 11 1257 16*58 Stainless Steel SS Aluminium Stainless Steel

Non-Standard Plates Refer to page 17

Ordering Procedure AN00302AN00202 20202NN 20206NN NN60302 20210NA NN83302NN31202 The 202 Series is ordered to suit right or left handed doors. It is necessary to specify 20207AN 20207CN 20207EN 20207FN 20207NN 20307NN the furniture plate and finish code, eg 20201NA/96LNT.

20201NA 20301NA NN30202 20204NN 20304NN NN41202 20220NA 20320NA 162 23

162 20205NN 20305NN 20222NN 20322NN 20339NN

48.7

28.6 SS/Brass Aluminium 20224NN/16* 20324NN/16* 20225NA/16*20325NA/16* 20227NN/16* 20327NN/16* 20228NN/16* 20342NN/16*

16 16 16 16 NN13202*/NG42202*/NE42202*/NC42202*/NA42202 NN13302 20232NA AN23302 NN43202NN53202

Legend Cylinder Hole Slotted Button LED

Turn-Snib Disabled Indicating Slotted Button

5 Artefact Series II Door Furniture

Round End Plates The 212 Series Door Furniture is 162mm long x 50mm wide with radius ends. Concealed fixed plates have studs with internal threads located top and bottom, visible fixed plates have FIRE RATED corresponding countersunk holes and are fixed back to back through the door. S3 HIGH SECURITY

Application DURABILITY Designed for use with Lockwood 3570 Series Mortice Latches. ANTI-CORROSION

Features & Specifications Dimensions 162 x 50 x 3mm – Aluminium 162 x 50 x 2mm – Stainless Steel and Brass

Materials Aluminium, stainless steel or brass.

Door Thickness 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.

Finishes Levers and Knob to Suit Brass levers and knobs also Standard available refer page 18. 20 8*8 69 89 Natural Anodised Aluminium NT *Aluminium Only Stainless Steel SS Pull Handle to Suit Non-Standard 11 1257 16*58 Refer to page 17 Aluminium Stainless Steel

Ordering Procedure Plates The 212 Series is a non-handed plate, however

consideration to handing must 21200NA 21300NA 21202NN 21206NN 21306NN 21207NN21307NN 21210NA 21213NN 21338NN be given to lever selection. It is necessary to specify the furniture plate and finish code, eg 21201NA/96SS. NN40312NN40212NN30212AN10312AN10212 21205NN 21305NN 21214NN 21339NN

50 2 3

21220NA 21320NA 21222NN 21322NN 162

Legend Cylinder Hole Slotted Button LED SS/Brass Aluminium Turn-Snib Disabled Indicating Slotted Button

1300 LOCK UP (1300 562 587) lockweb.com.au 6 Artefact Series II Door Furniture Lockwood Catalogue

Square End Plates The 224 Series Door Furniture is 162mm long x 50mm wide with square ends. Concealed fixed plates have studs with internal threads located top and bottom, visible fixed plates have FIRE RATED corresponding countersunk holes and are fixed back to back through the door. S3 HIGH SECURITY

Application DURABILITY Designed for use with Lockwood 3570 Series Mortice Latches. ANTI-CORROSION

Features & Specifications Dimensions 162 x 162 x 2mm – Stainless Steel

Materials Stainless Steel only.

Door Thickness 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.

Finishes Standard Levers and Knob to Suit Brass levers and knobs also Stainless Steel SS available refer page 1. 20 69 89 Non-Standard Pull Handle to Suit Refer to page 17

Ordering Procedure 11 1257 16*58 Aluminium Stainless Steel The 224 Series is a non-handed plate, however Plates consideration to handing must be given to Lever Selection. It is necessary to specify the furniture plate and finish code, 22400NA 22500NA 22402NN 22406NN 22506NN 22407NN22507NN 22410NA 22413NN 22538NN eg 22401NA/96SS.

50 2 3 2 2AN1024 24 24 25 NN402NN402NN302AN1025 22405NN 22505NN 22414NN 22539NN

162 22420NA 22520NA 22422NN 22522NN

Stainless Steel Legend Cylinder Hole Slotted Button LED

Turn-Snib Disabled Indicating Slotted Button

7 Artefact Series II Door Furniture

Round Rose Furniture The 260 Series Door Furniture has a 55mm Round Rose. Concealed fixed plates have studs with internal threads located on the rose, visible roses have corresponding countersunk holes FIRE RATED and are fixed back to back through the door. S3 HIGH SECURITY Application Designed for use with Lockwood 3570 Series DURABILITY Mortice Latches and with A5250 tubular latches. ANTI-CORROSION Features & Specifications Dimensions 55 x 3mm – Aluminium 55 x 2mm – Stainless Steel and Brass

Materials

Aluminium, stainless steel or brass.

Door Thickness 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.

Finishes Levers and Knob to Suit Standard Brass levers and knobs also available refer page 18. Natural Anodised Aluminium NT 20 8*8 69 89 *Aluminium Only Stainless Steel SS

Non-Standard Rose Furniture 55mm Diameter Refer to page 17.

Ordering Procedure 260 Operable 261 Operable 262 Blank 263 Blank 264 Fixed 265 Fixed The 260 Series may be ordered as a set to suit right or left hand doors. It is Escutcheon Furniture 50mm Diameter necessary to specify the furniture rose and finish code, eg 260/261/96SS.

55 2 3 280 281 282 286 287

Legend Cylinder Hole Slotted Button SS/Brass Aluminium Turn-Snib Disabled

1300 LOCK UP (1300 562 587) lockweb.com.au 8 Artefact Series II Door Furniture Lockwood Catalogue

Square Rose Furniture The 260SQ Series Door Furniture has a 55mm x 2mm Square Rose. Concealed fixed plates have studs with internal threads located on the rose, visible roses have corresponding FIRE RATED countersunk holes and are fixed back to back through the door. S3 HIGH SECURITY

Application DURABILITY Designed for use with Lockwood 3570 Series Mortice Latches and with A5250 tubular latches. ANTI-CORROSION

Features & Specifications Dimensions 55 x 55 x 2mm – Stainless Steel

Materials Stainless Steel only.

Door Thickness 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.

Finishes Standard Levers and Knob to Suit Brass levers and knobs also Stainless Steel SS available refer page 18. 20 8*8 69 89 Non-Standard Refer to page 17. Square Furniture 55 x 55mm

Ordering Procedure The 260SQ Series may be ordered as a set to suit right or left hand doors. It is necessary to specify 260 Operable 261 Operable 262 Blank 263 Blank 264 Fixed 265 Fixed the furniture rose and finish code, Square Escutcheon Furniture 50 x 50mm eg 260/261/SQ90SS.

55 2 3 280 281 282 286 287

Legend Cylinder Hole Slotted Button Stainless Steel Turn-Snib Disabled

9 Artefact Series II Door Furniture

218/219 10mm Radius Corner Push/ Pull Plates The 218 Series Door Furniture is 250 x 50 x 2mm thick stainless steel or brass with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. Application Designed for use with 3570 Series Mortice Locks and on Push and Pull doors. Features & Specifications Dimensions 250 x 50 x 2mm. Materials Stainless steel or brass.

Door Thickness 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208. Engraving Options are available as indicated on the right. Plates Finishes Standard Satin Stainless Steel SS Non-Standard 21800NA 21900NA NN70912NN70812NN60912NN60812 21802NN NN83912NN31812 Refer to page 17 Ordering Procedure The 218 Series is non-handed (except where the disabled turnsnib in used). It is necessary 21825NA/* 21925NA/* 21827NN/* 21927NN/* 21824NN/* 21924NN/* 21826NN/* 21828NN/* 21942NN/* to specify the furniture plate and finish code, eg 21825EA/16SS. Function/Handle Selection Certain functions require certain handles to be 21807AN 21807BN 21807CN 21807DN 21807EN NF70812 21824BN/**21824DN/* /NG42812 used. The following table outlines which length handles (screw centre distance shown) should be used for a given function.

Function Description No With Engraving Engraving Legend

24 Pull Handle Only 203mm 152mm Cylinder Hole Slotted Button LED

25 Pull Handle & Cylinder 152mm 108mm Turn-Snib Disabled Indicating Slotted Button

26 Pull Handle & Emergency Turn 152mm 108mm

27 Pull Handle & Turn Knob 152mm 108mm

28 Pull Handle & Privacy 152mm 108mm Indicator Emergency Turn 29 Pull Handle & Privacy 152mm 108mm D Handle Selections Indicator Turn Knob

30 Pull Handle & Dual Cylinder × × Stainless Steel 19mm 16 17 18 42 Pull Handle & Disabled Turn 108mm × Brass 16mm 05 07 08 43 Pull Handle & Privacy 108mm × Indicator Disabled Turn Centres 108mm 152mm 203mm 44 Pull handle only – 108mm, 108mm, Offset from bottom 152mm 152mm Handle Numbers 07 and 08 are also available in Stainless Steel. 10 NOTE: x indicates this function is not available in this configuration. Artefact Series II Door Furniture Lockwood Catalogue

216/217 10mm Radius Corners Push/ Pull Plates The 216 Series Door Furniture is 300 x 65 x 2mm thick stainless steel or brass plate with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door.

Application Designed for use with 3570 Series Mortice Locks and on Push and Pull doors.

Features & Specifications Dimensions 300 x 65 x 2mm.

Materials Stainless steel or brass.

Door Thickness 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208. Plates Finishes Standard Satin Stainless Steel SS Non-Standard Refer to page 17 21600NA 21700NA 21606NN 21706NN 21607NN 21707NN 21602NN 21613NN 21738NN

Ordering Procedure The 216 Series is non-handed (except where the disabled turnsnib in used). It is necessary to specify the furniture plate and finish code, 21625NA/* 21725NA/* 21627NN/* 21727NN/* 21624NN/* 21724NN/* 21626NN/* 21628NN/* 21742NN/* eg 21625EA/16SS. Function/Handle Selection Certain functions require certain handles to be used. The following table outlines which length handles (screw centre distance shown) should 21607AN 21607BN 21607CN 21607DN 21607EN 21607FN 21624BN/* 21624DN/* 21624GN/* be used for a given function.

. Function Description No With Engraving Engraving Legend Cylinder Hole Slotted Button LED 24 Pull Handle Only 250mm 203mm Turn-Snib Disabled Indicating Slotted Button 25 Pull Handle & Cylinder 203mm 152mm

26 Pull Handle & Emergency Turn 203mm 152mm

27 Pull Handle & Turn Knob 203mm 152mm

28 Pull Handle & Privacy 203mm 152mm Indicator Emergency Turn

29 Pull Handle & Privacy 203mm 152mm D Handle Selections Indicator Turn Knob

30 Pull Handle & Dual Cylinder × × Stainless Steel 19mm** 16 17 18 19

42 Pull Handle & Disabled Turn 152mm 108mm Brass 16mm 05 07 08 10 43 Pull Handle & Privacy 152mm 108mm Indicator Disabled Turn Centres 108mm 152mm 203mm 250mm

44 Pull handle only – 108mm, 108mm, Offset from bottom 152mm, 152mm, Handle Numbers 07, 08 and 10 are also available in Stainless Steel. 203mm 203mm 11 NOTE: x indicates this function is not available in this configuration.

Artefact Series II Door Furniture

214/215 10mm Radius Corner Push/ Pull Plates The 214 Series Door Furniture is 300 x 100 x 2mm thick stainless steel or brass plates with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door.

Application Designed for use with 3570 Series Mortice Locks.

Features & Specifications Dimensions 300 x 100 x 2mm.

Materials Stainless steel or brass.

Door Thickness 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.

Finishes Plates Standard Satin Stainless Steel SS

Non-Standard Refer to page 17 21400NA 21500NA 21406NN 21506NN 21407NN 21507NN 21402NN 21413NN 21538NN

Ordering Procedure The 214 Series is non-handed (except where the disabled turnsnib in used). It is necessary

to specify the furniture plate and finish code, 21425NA/* 21525NN/* 21427NN/* 21527NN/* 21424NN/* 21524NN/* 21426NN/* 21428NN/* 21542NN/* eg 21425EA/16SS. Function/Handle Selection Certain functions require certain handles to be used. The following table outlines which length

handles (screw centre distance shown) should 21407AN 21407BN 21407CN 21407DN 21407EN 21407FN 21424BN/* 21424DN/* 21424GN/* be used for a given function.

Function Description No With Engraving Engraving Legend Cylinder Hole Slotted Button LED 24 Pull Handle Only 250mm 203mm Turn-Snib Disabled Indicating Slotted Button 25 Pull Handle & Cylinder 203mm 152mm

26 Pull Handle & Emergency Turn 203mm 152mm

27 Pull Handle & Turn Knob 203mm 152mm

28 Pull Handle & Privacy 203mm 152mm Indicator Emergency Turn

29 Pull Handle & Privacy 203mm 152mm D Handle Selections Indicator Turn Knob

30 Pull Handle & Dual Cylinder × × Stainless Steel 19mm** 16 17 18 19

42 Pull Handle & Disabled Turn 152mm 108mm Brass 16mm 05 07 08 10 43 Pull Handle & Privacy 152mm 108mm Indicator Disabled Turn Centres 108mm 152mm 203mm 250mm

44 Pull handle only – 108mm, 108mm, Offset from bottom 152mm, 152mm, Handle Numbers 07, 08 and 10 are also available in Stainless Steel. 203mm 203mm 12 NOTE: x indicates this function is not available in this configuration.

Artefact Series II Door Furniture Lockwood Catalogue

206/207 Series Push & Pull Plates The 206/207 Series Door Furniture are 2mm thick stainless steel plates with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door.

Application Designed for use with 3570 Series Mortice Locks.

Features & Specifications Dimensions 250 x 200 x 2mm.

Materials Stainless steel.

Door Thickness 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.

Finishes Standard Plates Satin Stainless Steel SS

Non-Standard Powdercoat PC

Ordering Procedure 20600NA 20700NA 20607NN 20707NN 20610NA 20624NN/18 The 206/207 Series is ordered to suit right and left handed doors. It is necessary to specify the furniture plate and finish code, eg 20625NA/18RSS. 20724NN/18 20625NA/18 20725NA/18

Legend Cylinder Hole Slotted Button LED

Turn-Snib Disabled Indicating Slotted Button

2AN00902AN0080 20807NN 20907NN 20810NA 20824NN/19 91/NN42902 20825NA/19 91/AN52902

D Handle Selections

Stainless Steel 19mm 18

Brass or Stainless Steel 16mm 08

Centres 203mm

13 Artefact Series II Door Furniture

208/209 Series Push & Pull Plates The 208/209 Series Door Furniture are 2mm thick stainless steel or brass plates with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door.

Application Designed for use with 3570 Series Mortice Locks.

Features & Specifications Dimensions 324 x 162 x 2mm.

Materials Stainless steel.

Door Thickness 20600NA 20700NA 20607NN 20707NN 20610NA 20624NN/18 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.

Finishes 20625NA/18 20725NA/18 Standard 20724NN/18 Satin Stainless Steel SS Plates Non-Standard Powdercoat PC

Ordering Procedure

The 208/209 Series is ordered to suit right and 2AN00902AN0080 20807NN 20907NN 20810NA 20824NN/19 91/NN42902 20825NA/19 91/AN52902 left handed doors. It is necessary to specify the furniture plate and finish code, Legend eg 20825NA/19RSS. Cylinder Hole Slotted Button LED

Turn-Snib Disabled Indicating Slotted Button

D Handle Selections

Stainless Steel 19mm 19

Brass or Stainless Steel 16mm 10

Centres 250mm

1300 LOCK UP (1300 562 587) lockweb.com.au 14 Artefact Series II Door Furniture Lockwood Catalogue

Pull Handles All pull handles are designed for single handle application and can be used with Lockwood pull plates and roses.

Features & Specifications Fixing Handles are concealed fixed. If ordered with Lockwood pull plates or roses, handles are screw fixed to plates.

Materials Brass and Stainless Steel where shown.

Limiting Dimensions

Handle No. Length Diameter Projection Fixing Centres Finger Clearance 01 117 22 35 108 25

02 162 22 35 152 25

03 212 22 35 203 25

Limiting Dimensions

Handle No. Length Diameter Projection Fixing Centres Finger Brass Stainless Clearance Steel

04 120 13 45 108 32 ✓ ✕

05 124 16 48 108 32 ✓ ✕ 06 165 13 45 152 32 ✓ ✕ 07 168 16 48 152 32 ✓ ✓ 08 219 16 48 203 32 ✓ ✓ 09 222 19 54 203 35 ✓ ✓ 10 269 19 54 250 35 ✓ ✓ 16 127 19 54 108 35 ✕ ✓ 17 171 19 54 152 35 ✕ ✓ 18 222 19 54 203 35 ✕ ✓ 19 269 19 54 250 35 ✕ ✓

Limiting Dimensions

Handle No. Length Diameter Projection Fixing Centres Finger Clearance 38 248 16 Base: 54 152 38

Top: 73

Designed for single handle applications for hospitals, disabled and aged care facilities. Material Solid brass.

15 Artefact Series II Door Furniture

Stainless Steel Pull Handles with Rose Designed for single or double handle applications.

Features & Specifications Door Thickness Double Handle Application. Fixing screws suit door thickness up to 45mm.

Finishes Standard Satin Stainless Steel SS

Non-Standard Refer to page 17 Limiting Dimensions for Roses 1360, 1370, 1220 Series

Handle No. Length Diameter Height Centre Finger Clearance 17 171 19 64 152 46

18 222 19 64 203 46 19 269 19 64 250 46

Limiting Dimensions for Roses 260 Series

Handle No. Length Diameter Height Centre Finger Clearance SS, Brass 17 171 19 64 152 35

18 222 19 64 203 35 19 269 19 64 250 35

1300 LOCK UP (1300 562 587) lockweb.com.au 16 Artefact Series II Door Furniture Lockwood Catalogue

Finishes Standard Finishes Satin Stainless Steel SS Natural Anodised Aluminium NT

Non-Standard Finishes Polished Brass PB Polished Stainless Steel PS Powdercoat PC

Dulux Powdercoat Range

50279 33344 36603 32786 81880 Dulux Wedgewood Satin Dulux Horizon Blue Gloss Dulux Azure Grey Satin Dulux APO Grey Satin Dulux Special White Gloss

36858 33704 33662 32774* 32999* Dulux Oyster Matt Dulux Tropics Gloss Dulux Pottery Satin Dulux Claret Satin Dulux Charcoal Gloss

33149 51032 32694* 19319* 19930* Dulux Red Earth Gloss Dulux Old Mauve Satin Dulux Black Gloss Dulux Black Matt Dulux Anodic Bronze Satin

81794* 50068* 52052* 18796* 51275 Dulux Deep Cherry Red Dulux Deep Brunswick Dulux Black Onyx Dulux Charcoal Dulux Anotec Dark Gloss Green Gloss Gloss Metallic Gloss Grey Matt

The colours represented on this chart are as close to the actual colours as modern printing processes allow. 32538 * Technical advice should be sought, where severe ultraviolet exposure conditions exist. Dulux Stone Beige Matt Note: Consideration should be given to match Cylinder Finish.

Limiting Dimensions for Lever/Knob Selections Aluminium

20 88 96 98

20 88 96 98 Stainless Steel

96 98

17

96 98 Artefact Series II Door Furniture

Limiting Dimensions for Lever/Knob Selections

17.5 17.5 40.5 45

50 48

113 60.5 95.3 42 123 107.5

00 Lever 20 Knob 32 Lever 40 Knob

28 21 17.5 17 17.2 52.5 49 47 44.5

40 44 107 104 120 117.5 114 125 130 125

Intermezzo 41 Arpeggio 44 Sonata 45 Nocturne 48

28.5 22.2 27 61 6.5 40 50 45

22

112.5 103 109.5 110 124 120 123 121

Veloce 53 Lever 55 Overture 59 Soprano 61

DAINTREE - dimensionals BRASS - dimensionals 25

55 50 10 36 33.5 38

13 15.9 17 26 115 113 110 109 116 118 127. 5 121 120 124 Lever 62 Lever 70 Tempo 71 Ving 74

DAINTREE - dimensionals DAINTREEBRASS - dimensionals - dimensionals BRASS - dimensionals

10 10 9 38 38 34

26 26

116 109 114.3

124 118 123

Cadenza 78 Tenor 79 Lever 79B Lever 80

DAINTREE - price book style BRASS - price book style 6.8 38 38 6.8 39.5 39.5

17 17

25 15.9 15.9 25

103 112 112 106 115 118.5 120 120

Lever 90 Lever 91 Lever 94 Chorus Line 97

1300 LOCK UP (1300 562 587) DAINTREE - price book style DAINTREEBRASS - price - price book book style style BRASS - price book style lockweb.com.au 18 Artefact Series II Door Furniture Lockwood Catalogue

Legend Functions

Slotted Button Indicating Slotted Button Disabled Turn Snib Flush Pull Turn Snib

Standards Plates Fire Rated FIRE RATED Lockwood Artefact Door Furniture has been successfully fire tested up to 4 Hours (depending on the type of fire door) on fire door assemblies, in accordance with Australian Standard AS Concealed Fixed Visible Fixed 1905.1 – 1997, Part 1: Fire-resistant doorsets. ConcealedConcealed VisibleVisible Fixed Fixed Security FixedFixed S3 HIGH SECURITY All Lockwood Artefact Door Furniture conforms with level S3 (Physical Security) Australian Lock Standard. (Standard Number AS 4145.2: 1993).

Durability DURABILITY All Lockwood Artefact Door Furniture conforms with level D3 (Durability) Australian Lock Standard (Standard Number AS 4145.2: 1993).

Corrosion Resistance ANTI-CORROSION This product has been successfully tested in accordance with AS 2331-3.1: 1980. Neutral Salt Spray Test (NSS TEST).

19 Artefact Series II Door Furniture

Ordering Procedures 2000 Series

Plate Type Plate Engraving Cylinder Lever/ Handing Finish Function Shape Knob 200 01 N A / 96 L SS

Plate Type Plate Function Engraving Handing Exterior Plate (162 x 162) Cylinder Only 00 A – G Outlined Infill Left L – Square Corners 200 R – X Full Infill Cylinder & Lever 01 Right R Interior Plate (162 x 162) Male symbol A R Emergency Turn Only 02 – Square Corners 201 Male text B S Finish Emergency Turn & Lever 03 Exterior Plate (162 x 162) Female symbol C T Stainless Steel Finishes – Radius Corners 202 Turn Knob & Lever 04 Female text D U Satin Stainless Steel SS Interior Plate (162 x 162) Lever Only 05 – Radius Corners 203 Disabled symbol E V Polished Stainless Steel PS Turn Knob Only 06 Exterior Plate (250 x 200) 206 Push text F W Powdercoat PC Plain Plate 07 Interior Plate (250 x 200) 207 Pull text G X Aluminium Finishes Cylinder & Fixed Lever 08 Exterior Plate (324 x 162) 208 Unisex symbol H Y Natural Anodised NT Fixed Lever Only 09 Interior Plate (324 x 162) 209 No option N Brass Finishes Dual Cylinder 10 Exterior Plate (162 x 50) Miscellaneous text* P Polished Brass PB – Oval 212 Privacy Indicator Emergency Turn Only 13 Corporate Engraving** Q Interior Plate (162 x 50) *Separate charge per letter – Oval 213 Privacy Indicator Emergency Turn & Lever 14 ** Separate charge per logo Exterior Plate (300 x 100) For all in-filled engraving, black gloss – Radius Corners 214 Privacy Indicator is the standard. Turn Knob Only 15 Interior Plate (300 x 100) Cylinder Shape – Radius Corners 215 Privacy Indicator Turn Knob & Lever 16 Exterior Plate (300 x 65) Oval Cylinder – – Radius Corners 216 Cylinder, Lever & LED 20 32mm (H) x 18mm (W) Lockwood 570 Cylinders A Interior Plate (300 x 65) Cylinder, Fixed Lever & LED 21 – Radius Corners 217 Lever & LED 22 Guarded Oval Cylinder – 32mm (H) x 18mm (W) Exterior Plate (250 x 50) Cylinder & LED 23 Lockwood 570 Cylinders B – Radius Corners 218 Pull Handle Only 24 No Cylinder Function N Interior Plate (250 x 50) – Radius Corners 219 Pull Handle & Cylinder 25 Lever/ Knob Type Exterior Plate (162 x 50) Pull Handle & – Rectangular 224 Emergency Turn 26 Brass Levers and Knobs Interior Plate (162 x 50) – Pull Handle & Turn Knob 27 00 53* 78 Rectangular 225 Pull Handle & Privacy 20 55 79 Indicator Emergency Turn 28 32 59 79B Pull Handle & Privacy 40 61* 80 Indicator Turn Knob 29 41* 62 90 Pull Handle & Dual Cylinder 30 44 70 91 Flush Pull Only 31 45 71 94* 48* 74 97 Flush Pull & Cylinder 32 Flush Pull & Emergency Turn 33 Stainless Steel Levers Flush Pull & Turn Knob 34 96 98 Flush Pull & Privacy Aluminium Levers/Knobs Indicator Emergency Turn 35 20 88 96 Flush Pull & Privacy 98 Indicator Turn Knob 36 Brass Pull Handles Flush Pull & Dual Cylinder 37 01 02 03 Disabled Turn Only 38 04 05 06 Disabled Turn & Lever 39 07 08 09 Privacy Indicator 10 Disabled Turn 40 Stainless Steel Pull Handles Privacy Indicator Disabled Turn & Lever 41 07 08 09 Pull Handle & Disabled Turn 42 10 16 17 18 19 1300 LOCK UP (1300 562 587) Aluminium Pull Handles lockweb.com.au 75 20 * Denotes handed levers Artefact Series II Door Furniture Lockwood Catalogue

Ordering Procedures Specification Service For all Architectural hardware specification assistance 260 Series refer to your local ASSA ABLOY Sales Office. Exterior Interior Rose Lever/ Handing Finish Rose Type Rose Type Shape Knob A fully comprehensive, obligation free, Architectural Door 260 / 261 / SQ 96 SS Hardware specification can be prepared by Architectural Hardware Representatives. Plate Type Rose Shape Handing Product Caring Exterior Rose Type 260 Round – Left L Exterior Round Square SQ Right R Please go to lockweb.com.au for details on product caring. Blank Rose 262 Non Handed – Quality Endorsed Company Exterior Round Rose Lever/ Knob Type – Fixed Lever 264 Finish Brass Levers and Knobs SAI Global operates a program which Stainless Steel Finishes assesses the quality procedures and Plate Function 00 53* 78 capabilities of an organisation in 20 55 79 Satin Stainless Steel SS Interior Round Rose 261 Quality Environment termsof the requirements of specific 32 59 79B Polished Stainless Steel PS ISO 9001 ISO 14001 Interior Round Australian and International Standards 40 61* 80 Blank Rose 263 Powdercoat PC 41* 62 90 for Quality Systems. Following assessment by SAI Global, Interior Round Rose Aluminium Finishes 44 70 91 ASSA ABLOY Australia Pty Limited, 235 Huntingdale Rd, – Fixed Lever 265 Natural Anodised NT 45 71 94* Oakleigh VIC 3166 have been granted a certificate of Brass Finishes 48* 74 97 registration as a quality endorsed company complying Polished Brass PB with the requirements of AS 3902/ISO 9001 – Quality Stainless Steel Levers Systems for Production and Installation. 96 98 Aluminium Levers/Knobs Disclaimer 20 88 96 Whilst every effort has been made to ensure that the 98 information contained in this catalogue is accurate at the time of publication, ASSA ABLOY recommends that * Denotes handed levers you consult ASSA ABLOY or its agents prior to placing an order to ascertain current information on specific products, as ASSA ABLOY reserves the right to make 206 Series changes without notice. ASSA ABLOY will not be liable Escutcheon Rose Finish for any injury, loss or damage whatsoever, arising from Shape any errors or omissions in the information contained in 280 SQ SS the catalogue or arising from the use or application of the information contained herein. This catalogue does not Escutcheon Finish constitute an offer for the sale of any particular product.

Oval Cylinder Escutcheon – Stainless Steel Finishes Lockwood Guarantee 32mm (H) x 18mm (W) Satin Stainless Steel SS Lockwood 570 Cylinders 280 Please go to lockweb.com.au for full details of the Polished Stainless Steel PS Turn Knob Escutcheon 281 Lockwood Guarantee. Emergency Turn Powdercoat PC Escutcheon 282 Aluminium Finishes Disabled Turn Knob Natural Anodised NT Escutcheon 286 Brass Finishes Euro Profile Cylinder Escutcheon 287 Polished Brass PB

Rose Shape Round – Square SQ

21 ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience

Lockwood is the leading brand in the Australian locking industry. With an established reputation for high quality products, this iconic brand provides a wide range of locking solutions to residential housing, commercial building and industrial application markets. Lockwood is supported by an extensive distribution and after-sales support network. Our customers include retailers, architects, trade and industrial personnel, locksmiths and security dealers.

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience. ASSA ABLOY is represented in all major regions, in both mature and emerging markets, with leading positions in Australia, Europe and North America. As the world’s leading lock group, ASSA ABLOY offers a more complete product range of door opening solutions than any other company in the market.

Australia 1300 LOCK UP (1300 562 587) lockweb.com.au

New Zealand Telephone +64 9415 7888 assaabloy.co.nz

Headline

ASSA ABLOY Australia Pty Limited ASSA ABLOY New Zealand Ltd. 235 Huntingdale Road, 6 Armstrong Road Oakleigh Victoria, 3166 Albany, North Shore City, 0632 Australia New Zealand MS0575

[email protected] [email protected] ASSA ABLOY, the global leader assaabloy.com.au assaabloy.co.nz in door opening solutions AAA-CAT-039

ASSA ABLOY Australia Pty Limited ABN 90 086 451 907 ©2009