DOCSLIB.ORG

Pluggable Transceivers Installation Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Pluggable Transceivers Installation Guide Pluggable Transceivers Installation Guide 121140-06 Published September 2018 Copyright © 2018 Extreme Networks, Inc. All rights reserved. Legal Notice Extreme Networks, Inc. reserves the right to make changes in specifications and other information contained in this document and its website without prior notice. The reader should in all cases consult representatives of Extreme Networks to determine whether any such changes have been made. The hardware, firmware, software or any specifications described or referred to in this document are subject to change without notice. Trademarks Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc. in the United States and/or other countries. All other names (including any product names) mentioned in this document are the property of their respective owners and may be trademarks or registered trademarks of their respective companies/owners. For additional information on Extreme Networks trademarks, please see: www.extremenetworks.com/company/legal/trademarks Software Licensing Some software files have been licensed under certain open source or third-party licenses. End- user license agreements and open source declarations can be found at: www.extremenetworks.com/support/policies/software-licensing Support For product support, phone the Global Technical Assistance Center (GTAC) at 1-800-998-2408 (toll-free in U.S. and Canada) or +1-408-579-2826. For the support phone number in other countries, visit: http://www.extremenetworks.com/support/contact/ For product documentation online, visit: https://www.extremenetworks.com/documentation/ Table of Contents Preface......................................................................................................................................... 6 Conventions.............................................................................................................................................................................6 Providing Feedback to Us.................................................................................................................................................7 Getting Help.............................................................................................................................................................................8 Extreme Networks Documentation............................................................................................................................. 8 Chapter 1: Extreme Networks SFP Modules...........................................................................9 1 Gb SX and Industrial Grade SX SFP Modules (10051, 10051H, I-MGBIC-GSX)....................................10 1 Gb SX SFP DDI Modules (MGBIC-LC01, AA1419048-E6)............................................................................... 11 1 Gb LX Industrial Grade SFP for Multimode Fiber (I-MGBIC-LC03)...........................................................11 1 Gb LX and Industrial Grade LX SFP Modules (10052, 10052H, I-MGBIC-GLX).................................. 12 1 Gb LX SFP LC DDI Modules (MGBIC-LC09, AA1419049-E6)......................................................................13 ZX SFP Module (10053H)................................................................................................................................................14 1000BASE-BX Bidirectional 10 km SFP Modules (10056H/10057H, MGBIC-BX10-D/ MGBIC-BX10-U).................................................................................................................................................................... 15 1000BX Bidirectional 40 km SFP Modules for Gigabit Ethernet Ports (MGBIC-BX40-D, MGBIC-BX40-U)...................................................................................................................................................................16 1000BX Bidirectional 120 km SFP Modules for Gigabit Ethernet Ports (MGBIC-BX120-D, MGBIC-BX120-U)..................................................................................................................................................................17 100FX SFP Module for Gigabit Ethernet Ports (10063)................................................................................... 17 100FX SFP Module for Fast Ethernet Ports (10067)......................................................................................... 18 Dual-speed 100LX/1000LX and Industrial Grade 100LX/1000LX SFP Module (10060, 10060H)................................................................................................................................................................................... 19 LX100 SFP Module (10064).......................................................................................................................................... 20 100BASE-LX10 SFP Module (10066)......................................................................................................................... 21 100BASE-BX Bidirectional SFP Modules (10058, 10059)............................................................................... 22 10/100/1000BASE-T Copper SFP and Industrial Grade SFP Modules (10065, 10070H)................23 1000BASE-T Copper SFP Module (MGBIC-02).................................................................................................. 23 Installing and Removing an SFP, SFP+, or SFP28 Module............................................................................. 24 Chapter 2: Extreme Networks SFP+ Modules......................................................................28 SR SFP+ Module (10301).................................................................................................................................................28 SR High Temperature SFP+ Module (AA1403015-E6HT)............................................................................... 29 LR SFP+ Module (10302).................................................................................................................................................31 LR/LW High Temperature SFP+ Module (AA1403011-E6HT)....................................................................... 32 ER SFP+ Module (10309)............................................................................................................................................... 33 LRM SFP+ Module (10303)............................................................................................................................................34 ZR SFP+ Module (10310).................................................................................................................................................35 Tunable DWDM SFP+ Module (10325).....................................................................................................................35 10 Gb Bidirectional 10 km SFP+ Module (10GB-BX10-D, 10GB-BX10-U)................................................. 37 10 Gb Bidirectional 40 km SFP+ Module (10GB-BX40-D, 10GB-BX40-U).............................................38 10GBASE-T Ethernet SFP+ Module (10338)......................................................................................................... 38 Installing and Removing an SFP+ Module..............................................................................................................39 Chapter 3: Extreme Networks 25 Gb SFP28 Modules........................................................40 25 Gb SR SFP28 Module (10501)............................................................................................................................... 40 25 Gb SR-Lite MMF (Multimode Fiber) SFP28 Module (10502).................................................................. 41 25 Gb ESR SFP28 Module (10503)............................................................................................................................42 Pluggable Transceivers Installation Guide 3 Table of Contents 25 Gb LR 10 km SFP28 Module (10504).................................................................................................................43 Installing and Removing an SFP28 Module...........................................................................................................44 Chapter 4: Extreme Networks 40 Gb QSFP+ Modules...................................................... 45 40 Gb SR4 QSFP+ Module (10319)........................................................................................................................... 46 40 Gb ESR4 QSFP+ Module (40GB-ESR4-QSFP)............................................................................................47 40 Gb LM4 QSFP+ Module (10334)..........................................................................................................................48 40 Gb LM4 MMF (Multimode Fiber) QSFP+ Module (AA1404002-E6).................................................49 40 Gb LR4 QSFP+ Module (10320, 40GB-LR4-QSFP)...................................................................................50 40 Gb LR4 PSM (Parallel Single-Mode) QSFP+ Module (10326).................................................................51 40 Gb ER4 QSFP+ Module (10335)...........................................................................................................................52 40 Gb Bidirectional MMF (Multimode Fiber) QSFP+ Module (10329).....................................................53 Installing a QSFP+ or QSFP28 Module...................................................................................................................
Load more

Recommended publications
  • 10G EPON- Unleashing the Bandwidth Potential White Papers
    www.zte.com.cn 10G EPON- Unleashing the Bandwidth Potential White Papers Product Type Technical Description Version Date Author Approved By Remarks Sameer V1.00 00-0-4 Ashfaq Not open to the Third Party Malik © 00 ZTE Corporation. All rights reserved. ZTE CONFIDENTIAL: This document contains proprietary information of ZTE and is not to be disclosed or used without the prior written permission of ZTE. Due to update and improvement of ZTE products and technologies, information in this document is subjected to change without notice. White Papers Content TABLE OF CONTENTS 1 Abstract………………………………………………………………………………………1 2 Introduction…………………………………………………………………………………1 3 IEEE 802.3av 10Gbit/s Ethernet-based PON (10G EPON) ……………………………2 4 Standardization Timeline…………………………………………………………………3 4.1 10 G EPON Co-existence with 1G EPON…………………………………………………4 5 Power Budget………………………………………………………………………………5 6 10G EPON Optical Spectrum Allocation…………………………………………………6 7 Forward Error Correction (FEC)…………………………………………………………6 8 Dynamic Bandwidth Allocation (DBA)…………………………………………………6 9 10G Convergence……………………………………………………………………………7 10 10G EPON Industrial Chain………………………………………………………………7 11 Conclusion……………………………………………………………………………………8 FIGURES Figure 1 10G EPON protocol stack…………………………………………………………… Figure 2 shows the 10G EPON protocol schedule.…………………………………………… Figure 3 10G and 1G EPON co-existence……………………………………………………4 Figure 4 10G EPON Wavelength Allocation Chart……………………………………………6 Figure 5 Convergences at 10G…………………………………………………………………7 TABLES Table 1 Major Milestones in 10G EPON Study Group……………………………………… Table 2 Power Budget Explanation………………………………………………………………5 White Papers 1 Abstract For the first time in history, we can now aim to live in “ One World” , because the 1st century has ushered in a new era in man’ s ongoing quest for a better life and a better world. Telco industry is passing through a phase of multiservice revolution, with a shift from legacy to next generation networks and the introduction of new and advanced services (e.g.
    [Show full text]
  • Transceiver Product Guide
    PUBLIC_REV2017_N Transceiver Product Guide TRANSCEIVER PRODUCT GUIDE Skylaneoptics.com Transceivers for Datacom and Telecom Applications Skylane Optics is a leading provider of transceivers for optical communication. We offer an extensive portfolio for the enterprise, access, and metropolitan fiber optical market. The offerings provided by Skylane Optics are characterized by high quality and performance. In combination with our strong technical support, we enable our customers to build cost optimized network solutions solving existing and future capacity needs. Solutions Data Center Optimized fiber optic solution for Data Center Application FTTH Broad Product Portfoloio and Technology for FTTH Broadband Networks Wireless Enabling Rapid Expnsion of Mobile Broadband Enterprise - Campus We provides the enterprise network market with the most comprehensive product combinations TRANSCEIVER PRODUCT GUIDE P01 Products Our Engineering and Logistics Center > Inventory, logistics, programming and quality > control based in Fraire, Belgium > IQC [Incoming Quality Control] and OQC > [Outgoing Quality Control] > 100% optimized for handling of transceivers > SD [ANSI/ESD S20.20] compliant > Clean room environment; class 100K > Traceability > High Capacity Our Laboratory > Lab, based in Fraire, Belgium > Technical support > RMA handling > Qualification tests: > - Measure performance over the temperature range to verify compliance with standards > - Compliance with standards (IEEE, IEC, MSA) > - Power consumption > - Eye diagram > - Sensitivity > - Wavelength TRANSCEIVER PRODUCT GUIDE P02 Why Skylane Optics ? Innovations for Early Adopters Quality & Assurance Customization The manufacturing environment is strictly We have cutting-edge test equipment to Due to our high experienced engineers, compliant to most avanced standard, which ensure we supply high quality products. we are enable to modify the hardware and ensure long term reliability. software of the transceivers.
    [Show full text]
  • Hankins-100-Gbe-And-Beyond.Pdf
    100 GBE AND BEYOND Greg Hankins <[email protected]> NANOG52 Diagram courtesy of the CFP MSA. NANOG52 2011/06/14 Agenda and What’s Covered in This Presentation • Ethernet interface technology • Overview • 28 Gbps Common Electrical Interfaces (CEI) • New 100 Gbps Media Modules • 100 GbE Developments • Beyond 100 GbE… • Optical technology developments are intentionally left out • Go see Drew Perkins’ talk tomorrow morning: “Dawn of the Terabit Age: Scaling Optical Capacity to Meet Internet Demand” • Skipping router packet processing, lookup capabilities and memory architectures • Wire-speed 100 GbE is ~149 Mpps, or one packet every 6.7 ns at 64 byte frames • Maybe a topic for the next NANOG? 2 Standards Organizations and You, Revisited Name Primary Role (in Context of this Presentation) Primary Players Customers Buy Your Services You Run Networks Hardware Vendors Make Equipment Hardware Vendors, Ethernet Service Definitions, Standards and Certification Network Operators Hardware Vendors, Higher Layer Protocol Standards Network Operators Ethernet Standards (802.1, 802.3) Component and Fibre Channel Standards (T11) Hardware Vendors Telecom Standards (SG15) Component and Optical Module Standards Hardware Vendors, Network Operators SFF Component and Media Module Standards Committee Hardware Vendors Component and Component Interface Standards Hardware Vendors Current State of the Industry • There is already demand for other interfaces beyond the scope of IEEE 802.3ba (June 2010) • Standard defines a flexible architecture that enables many
    [Show full text]
  • XAUI V12.3 Logicore IP Product Guide (PG053)
    XAUI v12.3 LogiCOREDiscontinued IP Product Guide Vivado Design Suite PG053 December 5, 2018 NOTICE: This is the last release of this IP solution. While supported for Vivado® Design Suite 2018.3, this core will not be supported in the future releases. For more information, see AR 71454. IP Table of Contents IP Facts ChapterDiscontinued 1: Overview Additional Features . 6 About the Core. 6 Recommended Design Experience . 7 Applications . 7 Licensing and Ordering . 8 Feedback. 8 Chapter 2: Product Specification Standards Compliance . 10 Performance. 10 Resource Utilization. 11 Verification. 11 Port Descriptions . 12 Register Space . 30 Chapter 3: Designing with the Core General Design Guidelines . 63 Shared Logic . 64 Clocking: UltraScale Architecture . 65 Clocking: Zynq-7000, Virtex-7, Artix-7, and Kintex-7 Devices. .IP . 70 Multiple Core Instances. 77 Reset Circuits . 77 Receiver Termination: Virtex-7 and Kintex-7 FPGAs . 77 Transmit Skew . 77 Data Interface: Internal XGMII Interfaces . 78 Interfacing to the Transmit Client Interface. 79 Interfacing to the Receive Client Interface. 80 Configuration and Status Interfaces . 81 MDIO Interface. 81 Configuration and Status Vectors . 85 Debug Port . 87 XAUI v12.3 Product Guide Send Feedback 2 PG053 December 5, 2018 www.xilinx.com Chapter 4: Design Flow Steps Customizing and Generating the Core . 88 Output Generation. 92 Constraining the Core . 93 Simulation . 95 Synthesis and Implementation . 95 Chapter 5: Example Design ChapterDiscontinued 6: Test Bench Appendix A: Verification and Interoperability Simulation . 102 Hardware Testing. 102 Appendix B: Upgrading Device Migration . 103 Migrating to the Vivado Design Suite. 103 Upgrading in the Vivado Design Suite . 103 Appendix C: Debugging Designs Finding Help on xilinx.com .
    [Show full text]
  • Cisco 10GBASE X2 Modules
    Data Sheet Cisco 10GBASE X2 Modules Product Overview The Cisco ® 10GBASE X2 modules (Figure 1) offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. Figure 1. Cisco 10GBASE X2 and Xenpak Modules Main features of Cisco 10GBASE X2 modules include: ● Support 10GBASE Ethernet. ● Hot-swappable input/output device plugs into an Ethernet X2 port of a Cisco switch or router to link the port with the network. ● Provides flexibility of interface choice. ● Supports “pay-as-you-populate” model. ● Supports the Cisco quality identification (ID) feature that enables a Cisco switch or router to identify whether the module is certified and tested by Cisco. ● Has optical interoperability with respective 10GBASE Xenpak and 10GBASE XFP modules on the same link. Cisco X2-10GB-CX4 The Cisco 10GBASE-CX4 Module supports link lengths of up to 15m on CX4 cable. Cisco X2-10GB-LRM The Cisco 10GBASE-LRM Module supports link lengths of 220m on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber (MMF). To ensure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch cord is required for applications over OM3. All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 5 Data Sheet Cisco X2-10GB-LX4 The Cisco 10GBASE-LX4 Module supports link lengths of 300m on standard FDDI grade MMF. To ensure that specifications are met, the transmitter output should be coupled through a mode conditioning patch cord.
    [Show full text]
  • The Equivalent of XAUI and Other Architectural Considerations in 40G/100G Ethernet Piers Dawe Avago Technologies
    The equivalent of XAUI and other architectural considerations in 40G/100G Ethernet Piers Dawe Avago Technologies May 2008, Munich The equivalent of XAUI and other architectural 1 Contents • For those who like layer diagrams: 5 slides • For those who like block diagrams: 4 slides including test points – Proposed mapping of function to sublayer names • Use of compliance boards: 1 slide • Compliance points and WDM: 2 slide • Conclusions: 1 slide • Backup May 2008, Munich The equivalent of XAUI and other architectural 2 General architecture objectives • Architecture has to be a reasonable extraction of real-world implementation and partitioning – NOT force-fit reality to a pre-chosen documentation architecture • Seek a flexible, long-lived architecture that will support evolution – No 10GBASE-SR/SFP+ painting into a corner! May 2008, Munich The equivalent of XAUI and other architectural 3 Extender Sublayer,802.3ae way MAC MAC Reconciliation Reconciliation XGMII XGMII XGXS 10GBASE-X PCS Optional XGMII XAUI 10GBASE-X PMA extender XGXS XAUI These XGMII 10GBASE-X PMA sublayers are PCS 10GBASE-X PCS upside down FEC XGMII PHY PMA PCS PMD FEC PHY MDI PMA Medium PMD From Figure 46-1 MDI Adding detail from and Figure 74-1 Medium Figure 48-1 • XGXS/XAUI is 8B/10 encoded, 4 lanes • PHY is typically 64B/66B encoded, one lane May 2008, Munich The equivalent of XAUI and other architectural 4 More realistically... MAC MAC Reconciliation Reconciliation FIFOs, crystal XGMII XGMII XGMII 10GBASE-X PCS X PCS X PCS Drawn right 10GBASE-X PMA X PMA X PMA way up
    [Show full text]
  • DOCSIS® Provisioning of EPON Specifications Dpoev2.0 Dpoe
    DOCSIS® Provisioning of EPON Specifications DPoEv2.0 DPoE Physical Layer Specification DPoE-SP-PHYv2.0-I06-180228 ISSUED Notice This DPoE™ specification is the result of a cooperative effort undertaken at the direction of Cable Television Laboratories, Inc. for the benefit of the cable industry and its customers. You may download, copy, distribute, and reference the documents herein only for the purpose of developing products or services in accordance with such documents, and educational use. Except as granted by CableLabs® in a separate written license agreement, no license is granted to modify the documents herein (except via the Engineering Change process), or to use, copy, modify or distribute the documents for any other purpose. This document may contain references to other documents not owned or controlled by CableLabs. Use and understanding of this document may require access to such other documents. Designing, manufacturing, distributing, using, selling, or servicing products, or providing services, based on this document may require intellectual property licenses from third parties for technology referenced in this document. To the extent this document contains or refers to documents of third parties, you agree to abide by the terms of any licenses associated with such third-party documents, including open source licenses, if any. Cable Television Laboratories, Inc., 2012-2018 DPoE-SP-PHYv2.0-I06-180228 DOCSIS® Provisioning of EPON Specifications DISCLAIMER This document is furnished on an "AS IS" basis and neither CableLabs nor its members provides any representation or warranty, express or implied, regarding the accuracy, completeness, noninfringement, or fitness for a particular purpose of this document, or any document referenced herein.
    [Show full text]
  • Finisar 10GBASE-SR/SW XFP FTLX8511D3BTL 300M Industrial
    F i n i s a r Product Specification Industrial Temperature Range 10Gb/s 850nm Multimode Datacom XFP Optical Transceiver FTLX8511D3BTL PRODUCT FEATURES • Hot-pluggable XFP footprint • Supports 9.95Gb/s to 10.5Gb/s bit rates* • Power dissipation <1.5W • RoHS-6 compliant (lead-free) • Temperature range -40°C to +85°C • Single power supply: 3.3V • Maximum link length of 300m • 850nm heated VCSEL laser. APPLICATIONS • Duplex LC connector • 10GBASE-SR/SW 10G Ethernet • No Reference Clock required • 1200-Mx-SN-I 10G Fibre Channel • Built-in digital diagnostic functions • Standard bail release mechanism Finisar’s FTLX8511D3BTL Small Form Factor 10Gb/s (XFP) transceivers are compliant with the current XFP Multi-Source Agreement (MSA) Specification1 now available with Industrial Temperature Range of Operation (-40°C to +85°C). They comply with 10- Gigabit Ethernet 10GBASE-SR/SW per IEEE 802.3ae and 10G Fibre Channel 1200-Mx- SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC3, and Finisar Application Note AN-20384. PRODUCT SELECTION FTLX8511D3BTL *Contact Finisar for higher data-rate support © Finisar Corporation August 2010 Rev B Page 1 FTLX8511D3BTL Industrial Temperature XFP SR Specification – August 2010 F i n i s a r I. Pin Descriptions Pin Logic Symbol Name/Description Ref. 1 GND Module Ground 1 2 VEE5 Optional –5.2 Power Supply – Not required 3 LVTTL-I Mod-Desel Module De-select; When held low allows the module
    [Show full text]
  • Optical Module | FS
    OPTICAL MODULE World-Class Optics for Datacom and Telecom FS optical transceiver portfolio includes a wide What Make range of copper and optical transceivers to fit in data centers, enterprise and metro FS Optics networks. All of our transceivers are standards-based and comply with the MSA (Multi-Source Agreement). Rigorously tested in Unique? our own lab to ensure the highest levels of performance, FS optical transceivers are · Automated Production Line purpose-built for compatibility with over 200 FS highly automated and digitalized independent OEM vendors. While backed by large stock in production line ensures quality optical modules and our global warehouses, these transceivers are efficient delivery. subject to prompt delivery and lifetime warranty. · Advanced Technology FS R&D team has been focused on 200G & 400G FS has taken a leading role in offering advanced optical technology to meet the increasing cost-effective optical modules. With excellent growth in market demand. production line and testing equipment, FS is a trusted partner to data center operators, · Wide Compatibility telecom service providers, etc. All our fiber transceivers are 100% compatible with major FS provides a series of brand compatible optical brands. Items published in this catalog are also modules and FS box smart cloud platform to solve made to order or customize according to your real-time compatibility requirements for users. requirements. · Same-Day Shipping Full inventories are provided in FS local warehouses in the US, AU, Europe, and Asia covering global markets and supporting same-day shipping. 100G QSFP28 Transceivers Quad Small Form-Factor Pluggable 28 (QSFP28) QSFP28 allows data rate of 4x28Gbit/s used for 100Gbit/s links, delivering strong ability to increase port density and decrease price per bit.
    [Show full text]
  • 10G-EPON System Featuring High-Speed and High-Capacity Layer 3 Switching
    INFOCOMMUNICATIONS 10G-EPON System Featuring High-Speed and High-Capacity Layer 3 Switching Yusuke KAI*, Yohei HAMADA, Naoya KIZAKI, Hisashi KATAYAMA, Sumie TOMIYAMA and Kenjiro FUJINO ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- We have been providing advanced broadband technology and internet access equipment to the market. FSU7100 is our latest product that aims for the next generation high-speed transmission service. We offer 1G-EPON (Ethernet passive optical network) cards, 10G-EPON cards, and aggregation switch cards for FSU7100. This paper reports on the specification parameters of the common framework of sOFIA (Sumitomo Electric optical fiber access system integration architecture), line cards, and switch cards. In addition, as a software feature that enables operators to replace DOCSIS (Data over Cable Service Interface Specifications) systems with PON systems at low cost, DPoE (DOCSIS provisioning of EPON) is introduced. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Keywords: 10G-EPON, FTTH, DPoE, optical, Internet access 1. Introduction FSU7100 Line card × 16 ONU With continuously growing communication traffic, 10G/10G Backplane
    [Show full text]
  • 10-Gbps Ethernet Reference Design User Guide
    10-Gbps Ethernet Reference Design User Guide c The IP described in this document is scheduled for product obsolescence and discontinued support as described in PDN1207. Therefore, Altera® does not recommend use of this IP in new designs. For more information about Altera’s current IP offering, refer to Altera’s Intellectual Property website. 101 Innovation Drive IP Core Version: 11.0 San Jose, CA 95134 Document Date: December 2011 www.altera.com i–2 © December 2011 Altera Corporation 10-Gbps Ethernet Reference Design User Guide UG-01076-5.0 1. 10-Gbps Ethernet IP Datasheet This datasheet describes the Altera® 10-Gbps Ethernet IP core which implements the IEEE 802.3 2005 and 802.1Q Ethernet standards. You can use the Quartus® II software to parameterize and implement this IP core in your design. The 10-Gbps Ethernet IP core is highly configurable. It includes an Ethernet Media Access Controller (MAC) with an Avalon® Streaming (Avalon-ST) interface on the client side, and a XAUI or a standard XGMII interface on the network side. The XAUI interface is implemented as hard IP in an Altera FPGA transceiver or as soft logic, which results in a soft 10GBASE-X XAUI PCS. Alternatively, you can choose to implement a 10-Gbps Ethernet IP core that includes only the MAC or the soft XAUI PCS. Figure 1–1 illustrates the top-level modules of this IP core. 1 Altera categorizes this IP core as a reference design, described on the Altera website on the 10-Gbps Ethernet Reference Design web page. Figure 1–1.
    [Show full text]
  • Development of 10G-EPON to Better Handle Increased Traffic
    Special Issue on Telecom Carrier Solutions for New Value Creation Transport systems to cope with the rapidly increasing traffic Development of 10G-EPON to Better Handle Increased Traffic OOGUSHI Sadaichirou, SATOU Sou, SAEKI Naoto Abstract Japanese fiber-optical Internet services are built primarily around PON systems. However, as Internet traffic grows ever more complex and data-intensive, it becomes more difficult for these systems to handle the increased load. For example, the growing popularity of high-definition video streaming has massively increased traffic, as has mobile data communications caused by Wi-Fi offloading. In response to accelerating demand for higher speed and capacity over the past few years, NEC has developed a 10G-EPON system that achieves transmission speeds 10 times faster than conventional PON systems. In this paper we will first look at the basic technological underpinnings of PON and then outline the configuration and features of NEC’s 10G-EPON system. Finally, we will look at standardization activities and future trends. Keywords PON, FTTH, access network 1. Introduction 2. Overview of the PON Technology Fiber-to-the-home (FTTH) broadband services in Ja- A PON, or passive optical network, consists of an opti- pan are primarily based on the Gigabit Ethernet-Passive cal line terminal (OLT) and a number of optical network Optical Network (GE-PON) system, in which multiple units (ONUs). The OLT is installed at the FTTH service subscribers share 1-Gbps class transmission speed opti- provider’s central office while the ONUs are installed cal lines. near end users. This system is extremely economical Today, those systems are beginning to show the strain as the OLT and ONUs can share a single optical fiber, of attempting to cope with not only the constantly in- instead of requiring multiple fibers to serve multiple cus- creasing volume of mobile data communication traffic tomers.
    [Show full text]