DOCSLIB.ORG

Transceiver Product Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Transceiver Product Guide PUBLIC_REV2017_N Transceiver Product Guide TRANSCEIVER PRODUCT GUIDE Skylaneoptics.com Transceivers for Datacom and Telecom Applications Skylane Optics is a leading provider of transceivers for optical communication. We offer an extensive portfolio for the enterprise, access, and metropolitan fiber optical market. The offerings provided by Skylane Optics are characterized by high quality and performance. In combination with our strong technical support, we enable our customers to build cost optimized network solutions solving existing and future capacity needs. Solutions Data Center Optimized fiber optic solution for Data Center Application FTTH Broad Product Portfoloio and Technology for FTTH Broadband Networks Wireless Enabling Rapid Expnsion of Mobile Broadband Enterprise - Campus We provides the enterprise network market with the most comprehensive product combinations TRANSCEIVER PRODUCT GUIDE P01 Products Our Engineering and Logistics Center > Inventory, logistics, programming and quality > control based in Fraire, Belgium > IQC [Incoming Quality Control] and OQC > [Outgoing Quality Control] > 100% optimized for handling of transceivers > SD [ANSI/ESD S20.20] compliant > Clean room environment; class 100K > Traceability > High Capacity Our Laboratory > Lab, based in Fraire, Belgium > Technical support > RMA handling > Qualification tests: > - Measure performance over the temperature range to verify compliance with standards > - Compliance with standards (IEEE, IEC, MSA) > - Power consumption > - Eye diagram > - Sensitivity > - Wavelength TRANSCEIVER PRODUCT GUIDE P02 Why Skylane Optics ? Innovations for Early Adopters Quality & Assurance Customization The manufacturing environment is strictly We have cutting-edge test equipment to Due to our high experienced engineers, compliant to most avanced standard, which ensure we supply high quality products. we are enable to modify the hardware and ensure long term reliability. software of the transceivers. We are also able to produce transceivers with withe labelling. Mutli Compatibility Technical Support Skylane Optics offers the most cost-effec- Highly experienced Skylane Optics engi- tive solutions for all major platforms with neers will visit your facility to solve your the proprietary firmware. issues. Certifications Skylane Optics transceivers are certified by TUV. > EN 60950-1:2006 ITE, Safety, General require- ments > EN 60825-1:2007 Safety of laser products > EN 60825-2:2004 Safety of Optical Fiber Com- munication Systems Skylane Optics transceivers are CE and ROHS compliant. Skylane Optics transceivers are certified by UL TRANSCEIVER PRODUCT GUIDE P03 QSFP28 The quad small form-factor pluggable (QSFP28) is optical module transceivers used for both telecommunication and data communications application. The Skylane QSFP28 is a high performance transceiver module for 100 Gigabit Ethernet OTU-4 data links over a single mode fiber pair. The maximum reach is 10km. This transceiver module is compliant the QSFP28 Multisource Agreement (MSA). SEE THE PRODUCT PRODUCT DETAILS Technical specifications 01/ 02/ 03/ Operating temperature range 0°C Wavelength for all different kind of Ranging from 100m to 10km to 70°C needs 04/ 05/ Suitable for 100x Gigabit Ethernet Available in ribbon fibre and dual and OTU4 fibre TRANSCEIVER PRODUCT GUIDE P04 QSFP28 Ribbon Fiber STANDARD PART NUMBER DUAL RATE MEDIA TYPE WAVELENGTH DISTANCE TEMPERATURE 100GBase-SR4 Q2885P10C0PF 103 Gb/s Multi Mode 850nm 100m 0°C to 70°C 100GBase-SR4/OTU4 Q2885P10C1PF 112 Gb/s Multi Mode 850nm 100m 0°C to 70°C 100GBase-eSR4 Q2885P30C0PF 103 Gb/s Multi Mode 850nm 300m 0°C to 70°C 100GBase-eSR4/OTU4 Q2885P30C1PF 112 Gb/s Multi Mode 850nm 300m 0°C to 70°C 100GBase-PSM4 Q2813P50C0PD 103 Gb/s Single Mode 1310nm 500m 0°C to 70°C Dual Fiber 100GBase-CWDM4 Q28QL002C00F 103 Gb/s Single Mode 1270/1290/1310/1330nm 2km 0°C to 70°C 100GBase-CLR4 Q28QL002C00D 103 Gb/s Single Mode 1270/1290/1310/1330nm 2km 0°C to 70°C 100GBase-LR4 Q28QD010C00D 103 Gb/s Single Mode LAN-WDM 800GHz 10km 0°C to 70°C 100GBase-LR4/OTU4 Q28QD010C10D 112 Gbps Single Mode LAN-WDM 800GHz 10km 0°C to 70°C 100GBase-ER4 Lite Q28QD040C00F 103 Gb/s Single Mode LAN-WDM 800GHz 40km 0°C to 70°C 100GBase-ER4/OTU4 Lite Q28QD040C10F 112 Gbps Single Mode LAN-WDM 800GHz 40km 0°C to 70°C TRANSCEIVER PRODUCT GUIDE P05 CFP4 The centum form-factor pluggable (CFP4) is a hot pluggable optical module transceivers used for both telecommunication and data communi- cations application. The Skylane CFP4 is a high performance trans- ceivers module for 100 Gigabit Ethernet and OTU-4 data links over two single fibres. The maximum reach is 10km, with 6.3 dB end of life (EOL) power budget. This transceiver module is compliant the CFP Multisource Agreement (MSA). SEE THE PRODUCT PRODUCT DETAILS Technical specifications 01/ 02/ 03/ Operating temperature range 0°C Wavelength for Lan DWDM Ranging from 10km distance to 70°C 04/ 05/ Suitable for 100x gigabit ethernet Available in Dual Fibre and OTU4 protocols TRANSCEIVER PRODUCT GUIDE P06 CFP4 Dual Fiber STANDARD PART NUMBER DUAL RATE MEDIA TYPE WAVELENGTH DISTANCE TEMPERATURE 100GBase-LR4 CF4QD010C00D 103 Gb/s Single Mode LAN-WDM 800GHz 10km 0°C to 70°C 100GBase-LR4/OTU4 CF4QD010C10D 112 Gbps Single Mode LAN-WDM 800GHz 10km 0°C to 70°C 100GBase-ER4 Lite CF4QD040C00F 103 Gb/s Single Mode LAN-WDM 800GHz 40km 0°C to 70°C 100GBase-ER4/OTU4 Lite CF4QD040C10F 112 Gbps Single Mode LAN-WDM 800GHz 40km 0°C to 70°C TRANSCEIVER PRODUCT GUIDE P07 CFP2 The centum form-factor pluggable (CFP2) is an optical module transceivers used for both telecommunication and data communications application. The Skylane CFP2 is a high performance trans- ceiver module for 100 Gigabit Ethernet and OTU-4 data links over two single mode fibres. The maximum reach is 10km, with 6.3 dB end of life (EOL) power budget. This transceiver module is compliant the CFP Multisource Agreement (MSA). SEE THE PRODUCT PRODUCT DETAILS Technical specifications 01/ 02/ 03/ Operating temperature range 0°C Wavelength for Lan DWDM Ranging from 10km distance to 70°C 04/ 05/ Suitable for 100x gigabit ethernet Available in Dual Fibre and OTU-4 protocols TRANSCEIVER PRODUCT GUIDE P08 CFP2 Dual Fiber STANDARD PART NUMBER DUAL RATE MEDIA TYPE WAVELENGTH DISTANCE TEMPERATURE 100GBase-LR4 CF2QD010C00D 103 Gb/s Single Mode LAN-WDM 800GHz 10km 0°C to 70°C 100GBase-LR4/OTU4 CF2QD010C10D 112 Gbps Single Mode LAN-WDM 800GHz 10km 0°C to 70°C 100GBase-ER4 CF2QD040C00D 103 Gb/s Single Mode LAN-WDM 800GHz 40km 0°C to 70°C 100GBase-ER4/OTU4 CF2QD040C10D 112 Gbps Single Mode LAN-WDM 800GHz 40km 0°C to 70°C TRANSCEIVER PRODUCT GUIDE P09 CFP The centum form-factor pluggable (CFP) is an optical module transceivers used for both tele- communication and data communication appli- cation. The Skylane CFP is a high performance trans- ceiver module for 100 Gigabit Ethernet and OTU-4 datalinks over two single mode fibres. The maximum reach is 10km, with 6.3dB end of life (EOL) power budget.This transceiver module is compliant with the CFP Multisource Agree- ment (MSA). SEE THE PRODUCT PRODUCT DETAILS Technical specifications 01/ 02/ 03/ Operating temperature range 0°C Wavelength for LAN DWDM Ranging for 10km to 70°C 04/ 05/ Suitable for 100x gigabit Ethernet Available in Dual Fibre and OTU4 TRANSCEIVER PRODUCT GUIDE P10 CFP Dual Fiber STANDARD PART NUMBER DUAL RATE MEDIA TYPE WAVELENGTH DISTANCE TEMPERATURE 100GBase-LR4 CFPQD010C00D 103 Gb/s Single Mode LAN-WDM 800GHz 10km 0°C to 70°C 100GBase-LR4 OTU4 CFPQD010C10D 112 Gbps Single Mode LAN-WDM 800GHz 10km 0°C to 70°C 100GBase-ER4 CFPQD040C00D 103 Gb/s Single Mode LAN-WDM 800GHz 40km 0°C to 70°C 100GBase-ER4/OTU4 CFPQD040C10D 112 Gbps Single Mode LAN-WDM 800GHz 40km 0°C to 70°C TRANSCEIVER PRODUCT GUIDE P11 QSFP+ The quad small form-factor pluggable (QSFP+) is an optical module transceivers used for both telecommunication and data communications application. The Skylane QSFP+ is a high performance transceivers module for 40 Gigabit Ethernet (ag- gregated) data links over two single fibres and ribbon fibre. The maximum reach is 10km. This transceiver module is compliant the QSFP+ Multisource Agreement (MSA). SEE THE PRODUCT PRODUCT DETAILS Technical specifications 01/ 02/ 03/ Operating temperature range 0°C Wavelength for all different kind of Ranging from 100m to 40km to 70°C needs 04/ 05/ Suitable for 40x Gigabit Ethernet Available in Ribbon and Dual fibre protocol TRANSCEIVER PRODUCT GUIDE P12 QSFP+ Ribbon Fiber STANDARD PART NUMBER DUAL RATE MEDIA TYPE WAVELENGTH DISTANCE TEMPERATURE 40GBase-SR4 QFP85xxx40PD 40 Gb/s Multi Mode 850nm 100/300m 0°C to 70°C 40GBase-PSM4 IR4 QFP13C1440PD 40 Gb/s Single Mode 1310nm 1,4km 0°C to 70°C 40GBase-PSM4 LR4 QFP1301040PD 40 Gb/s Single Mode 1310nm 10km 0°C to 70°C Dual Fiber 40GBase-IR4 QFPQLC1400D 40 Gb/s Single Mode 1270/1290/1310/1330nm 1,4km 0°C to 70°C 40GBase-LX4 QFPQL002400D 40 Gb/s Single Mode 1270/1290/1310/1330nm 2km 0°C to 70°C 40GBase-LR4 QFPQL002400U 40 Gb/s Single Mode 1270/1290/1310/1330nm 10km 0°C to 70°C 40GBase-ER4 QFPQL040400D 40 Gb/s Single Mode 1270/1290/1310/1330nm 40km 0°C to 70°C TRANSCEIVER PRODUCT GUIDE P13 SFP28 The small factor pluggable (SFP28) is an optical module transceivers used for both telecommu- nication and data communication applications. The Skylane SFP28 is a high performance trans- ceiver module for up to 25x Gigabit Ethernet data links over a single fibre pair. The maximum reach is 10km. This transceiver module is compliant with the SFP+ Multisource Agreement (MSA). SEE THE PRODUCT PRODUCT DETAILS Technical specifications 01/ 02/ 03/ Operating temperature range 0°C Wavelength for 850nm and Ranging for 100m and 10km dis- to 70°C 1310nm tance 04/ 05/ Suitable for 25x Gigabit Ethernet Available in dual fibre TRANSCEIVER PRODUCT GUIDE P14 SFP28 Dual Fiber STANDARD PART NUMBER DUAL RATE MEDIA TYPE WAVELENGTH DISTANCE TEMPERATURE 25GBase-SR S2885P10250F 25 Gb/s Multi Mode 850nm 100m -40°C to 85°C 25GBase-LR S2813010250D 25 Gb/s Single Mode 1310nm 10km -40°C to 85°C 25GBase-ER S2813040250F 25 Gb/s Multi Mode 1310nm 40km 0°C to 70°C Dual Fiber CWDM 25GBase-CWDM S2CXX010250D 25 Gb/s Single Mode CWDM ITU ch.
Load more

Recommended publications
  • 40 and 100 Gigabit Ethernet Overview
    Extreme Networks White Paper 40 and 100 Gigabit Ethernet Overview Abstract This paper takes a look at the main forces that are driving Ethernet bandwidth upwards. It looks at the standards and architectural practices adopted by the different segments, how the different speeds of Ethernet are used and how its popularity has resulted in an ecosystem spanning data centers, carrier networks, enterprise networks, and consumers. Make Your Network Mobile © 2011 Extreme Networks, Inc. All rights reserved. Do not reproduce. Extreme Networks White Paper: 40 and 100 Gigabit Ethernet Overview and how its popularity has resulted in a complex ecosys- Overview tem between carrier networks, enterprise networks, and consumers. There are many reasons driving the need for higher bandwidth Ethernet, however, the main reason is our insatiable appetite for content. The definition of content Driving the Need for Speed in itself has evolved over time – where once the majority of traffic on an Ethernet network may have been occa- Ethernet in the Enterprise and Data sional file transfers, emails and the like, today technology Center is allowing us to push and receive richer content such Data center virtualization, which includes storage and as voice, video and high definition multimedia. Simi- server virtualization, is all about the efficient use of larly, mechanisms for delivering content have evolved resources. In the data center this is multifaceted. On over time to reflect this demand. While there were a few the one hand data center managers are trying to bring technologies competing for LAN dominance in the early power, cooling and space utilization under control, while days of networks, Ethernet has become the clear choice.
    [Show full text]
  • ATM Vs Gigabit Ethernet: a Technical Perspective
    White Paper Gigabit Ethernet and ATM A Technology Perspective Bursty, high-bandwidth applications are driving the need for similarly high-bandwidth campus backbone infrastructures. Today, there are two choices for the high-speed campus backbone: ATM or Gigabit Ethernet. For many reasons, business and technical, Gigabit Ethernet is selected as the technology of choice. This paper briefly presents, from a technical perspective, why Gigabit Ethernet is favored for most enterprise LANs. In the past, most campuses use shared-media backbones — such as 16/32 Mbps Token-Ring and 100 Mbps FDDI — that are only slightly higher in speed than the LANs and end stations they interconnect. This has caused severe congestion in the campus backbones when these backbones interconnect a number of access LANs. A high capacity, high performance, and highly resilient backbone is needed-one that can be scaled as end stations grow in number or demand more bandwidth. Also needed is the ability to support differentiated service levels (Quality of Service or QoS), so that high priority, time-sensitive, and mission-critical applications can share the same network infrastructure as those that require only best-effort service. 2 Gigabit Ethernet and ATM: A Technology Perspective White Paper Until recently, Asynchronous Transfer Interface, and Multiprotocol over ATM). Which is a “better” technology is no Mode (ATM) was the only switching This additional complexity is required in longer a subject of heated industry debate technology able to deliver high capacity order to adapt ATM to the connectionless, — Gigabit Ethernet is an appropriate and scalable bandwidth, with the promise frame-based world of the campus LAN.
    [Show full text]
  • 10G EPON- Unleashing the Bandwidth Potential White Papers
    www.zte.com.cn 10G EPON- Unleashing the Bandwidth Potential White Papers Product Type Technical Description Version Date Author Approved By Remarks Sameer V1.00 00-0-4 Ashfaq Not open to the Third Party Malik © 00 ZTE Corporation. All rights reserved. ZTE CONFIDENTIAL: This document contains proprietary information of ZTE and is not to be disclosed or used without the prior written permission of ZTE. Due to update and improvement of ZTE products and technologies, information in this document is subjected to change without notice. White Papers Content TABLE OF CONTENTS 1 Abstract………………………………………………………………………………………1 2 Introduction…………………………………………………………………………………1 3 IEEE 802.3av 10Gbit/s Ethernet-based PON (10G EPON) ……………………………2 4 Standardization Timeline…………………………………………………………………3 4.1 10 G EPON Co-existence with 1G EPON…………………………………………………4 5 Power Budget………………………………………………………………………………5 6 10G EPON Optical Spectrum Allocation…………………………………………………6 7 Forward Error Correction (FEC)…………………………………………………………6 8 Dynamic Bandwidth Allocation (DBA)…………………………………………………6 9 10G Convergence……………………………………………………………………………7 10 10G EPON Industrial Chain………………………………………………………………7 11 Conclusion……………………………………………………………………………………8 FIGURES Figure 1 10G EPON protocol stack…………………………………………………………… Figure 2 shows the 10G EPON protocol schedule.…………………………………………… Figure 3 10G and 1G EPON co-existence……………………………………………………4 Figure 4 10G EPON Wavelength Allocation Chart……………………………………………6 Figure 5 Convergences at 10G…………………………………………………………………7 TABLES Table 1 Major Milestones in 10G EPON Study Group……………………………………… Table 2 Power Budget Explanation………………………………………………………………5 White Papers 1 Abstract For the first time in history, we can now aim to live in “ One World” , because the 1st century has ushered in a new era in man’ s ongoing quest for a better life and a better world. Telco industry is passing through a phase of multiservice revolution, with a shift from legacy to next generation networks and the introduction of new and advanced services (e.g.
    [Show full text]
  • 100 Gigabit Ethernet Is Here!
    100 Gigabit Ethernet is Here! Introduction Ethernet technology has come a long way since its humble beginning in 1973 at Xerox PARC. With each subsequent iteration, there has been a lag between time of standardization and large scale adoption. The latest iteration, dubbed 802.3ba by the IEEE Higher Speed Study Group (HSSG), was ratified in June, 2010 and follows this same pattern but with a slight twist. For the first time in Ethernet history a single standard defines two separate speeds; 100 Gigabit Ethernet (100GbE) as well as 40 Gigabit Ethernet (40GbE). Figure 1: Original Ethernet Sketch The technical challenges facing 100GbE have been significant; ranging from developing a whole new generation of optics that can handle 4 lanes of 25Gbps, to simply dealing with normal router and switch functions such as packet inspection, queuing, lookups, filtering and table updates, all in one-tenth the amount of time as with 10GbE. And of course this all has to be done with complete backwards compatibility and meeting all expectations with respect to bit error rate, latency, jitter and the like. As expected 40GbE gained some level of market acceptance first, but some 5 years after ratification the time for 100 Gigabit Ethernet is now! 2 | P a g e This whitepaper will discuss the evolution of 100GbE technology in the service provider and data center markets and provide insights in to how network application acceleration hardware can be leveraged to maximize performance and efficiency in emerging 100GbE network appliances. 100GbE in Service Providers Networks 100GbE is rapidly approaching large scale adoption in the wide area network (WAN), which is largely the purview of service providers.
    [Show full text]
  • Hankins-100-Gbe-And-Beyond.Pdf
    100 GBE AND BEYOND Greg Hankins <[email protected]> NANOG52 Diagram courtesy of the CFP MSA. NANOG52 2011/06/14 Agenda and What’s Covered in This Presentation • Ethernet interface technology • Overview • 28 Gbps Common Electrical Interfaces (CEI) • New 100 Gbps Media Modules • 100 GbE Developments • Beyond 100 GbE… • Optical technology developments are intentionally left out • Go see Drew Perkins’ talk tomorrow morning: “Dawn of the Terabit Age: Scaling Optical Capacity to Meet Internet Demand” • Skipping router packet processing, lookup capabilities and memory architectures • Wire-speed 100 GbE is ~149 Mpps, or one packet every 6.7 ns at 64 byte frames • Maybe a topic for the next NANOG? 2 Standards Organizations and You, Revisited Name Primary Role (in Context of this Presentation) Primary Players Customers Buy Your Services You Run Networks Hardware Vendors Make Equipment Hardware Vendors, Ethernet Service Definitions, Standards and Certification Network Operators Hardware Vendors, Higher Layer Protocol Standards Network Operators Ethernet Standards (802.1, 802.3) Component and Fibre Channel Standards (T11) Hardware Vendors Telecom Standards (SG15) Component and Optical Module Standards Hardware Vendors, Network Operators SFF Component and Media Module Standards Committee Hardware Vendors Component and Component Interface Standards Hardware Vendors Current State of the Industry • There is already demand for other interfaces beyond the scope of IEEE 802.3ba (June 2010) • Standard defines a flexible architecture that enables many
    [Show full text]
  • IEEE Std 802.3™-2012 New York, NY 10016-5997 (Revision of USA IEEE Std 802.3-2008)
    IEEE Standard for Ethernet IEEE Computer Society Sponsored by the LAN/MAN Standards Committee IEEE 3 Park Avenue IEEE Std 802.3™-2012 New York, NY 10016-5997 (Revision of USA IEEE Std 802.3-2008) 28 December 2012 IEEE Std 802.3™-2012 (Revision of IEEE Std 802.3-2008) IEEE Standard for Ethernet Sponsor LAN/MAN Standards Committee of the IEEE Computer Society Approved 30 August 2012 IEEE-SA Standard Board Abstract: Ethernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 100 Gb/s using a common media access control (MAC) specification and management information base (MIB). The Carrier Sense Multiple Access with Collision Detection (CSMA/CD) MAC protocol specifies shared medium (half duplex) operation, as well as full duplex operation. Speed specific Media Independent Interfaces (MIIs) allow use of selected Physical Layer devices (PHY) for operation over coaxial, twisted-pair or fiber optic cables. System considerations for multisegment shared access networks describe the use of Repeaters that are defined for operational speeds up to 1000 Mb/s. Local Area Network (LAN) operation is supported at all speeds. Other specified capabilities include various PHY types for access networks, PHYs suitable for metropolitan area network applications, and the provision of power over selected twisted-pair PHY types. Keywords: 10BASE; 100BASE; 1000BASE; 10GBASE; 40GBASE; 100GBASE; 10 Gigabit Ethernet; 40 Gigabit Ethernet; 100 Gigabit Ethernet; attachment unit interface; AUI; Auto Negotiation; Backplane Ethernet; data processing; DTE Power via the MDI; EPON; Ethernet; Ethernet in the First Mile; Ethernet passive optical network; Fast Ethernet; Gigabit Ethernet; GMII; information exchange; IEEE 802.3; local area network; management; medium dependent interface; media independent interface; MDI; MIB; MII; PHY; physical coding sublayer; Physical Layer; physical medium attachment; PMA; Power over Ethernet; repeater; type field; VLAN TAG; XGMII The Institute of Electrical and Electronics Engineers, Inc.
    [Show full text]
  • The Future Is 40 Gigabit Ethernet White Paper Cisco Public
    The Future Is 40 Gigabit Ethernet White Paper Cisco Public The Future Is 40 Gigabit Ethernet © 2016 Cisco and/or its affiliates. All rights reserved. The Future Is 40 Gigabit Ethernet White Paper Cisco Public Executive Summary The business case for 40 Gigabit Ethernet is becoming inescapably compelling. While 10 Gigabit Ethernet is still making its way into the data centers, CIOs and IT managers must now consider how they are going to handle what’s coming next: high-bandwidth applications such as server virtualization and cloud computing; fabric consolidation within the data center; and a greater demand for high-performance computing among end users (see Figure 1). The need for faster data transfer rates is relentless and carries significant implications with regard to network productivity as well as operating expenditure (OpEx) costs. Figure 1. Current Trends Driving the Demand for This report addresses the impending move to 40 Higher-Speed Ethernet Gigabit Ethernet, how it may change the network architecture, and what IT managers can do now to Market Drivers for More Bandwidth prepare to migrate to the new standard. Consumer & Broadband Access Introduction: The Business Case for Content 40 Gigabit Ethernet Providers Since February 1980, when the first IEEE 802 Server Virtualization standards committee convened, speeds in Ethernet Video on delivery to all layers have made increasingly greater Demand leaps over increasingly shorter intervals. In 2016, Blade Server Higher eight years after the adoption of 10 Gigabit Ethernet, Speed Service the IEEE has adopted 802.3ba, paving the way for Providers & Ethernet IXCs 40 Gigabit Ethernet and 100 Gigabit Ethernet.
    [Show full text]
  • 40 and 100 Gigabit Ethernet: an Imminent Reality
    WHITE PAPER 40 and 100 Gigabit Ethernet: An Imminent Reality 40 and 100 Gigabit Ethernet: An Imminent Reality Many of today’s data centers are running 10 Gigabit Ethernet (GbE) over both optical fiber and balanced twisted-pair copper cabling in their backbone infrastructure where large numbers of gigabit links aggregate at core devices. As more edge devices; like servers and storage equipment, continue to move to 10 GbE, the next natural progression is for the network core to require even faster connections within the data center. Fortunately, there is a solution that is now an imminent reality. Standards have been in development since 2008, and the Institute of Electrical and Electronics Engineers (IEEE) will soon release the 802.3ba standard that will support data rates for 40 and 100 GbE over optical fiber cabling. Both cable and connectivity solutions capable of supporting these speeds already exist, and vendors are in the process of developing active equipment. Now is the time to migrate data center cabling infrastructures to support this imminent technology. 40 and 100 Gigabit Ethernet: An Imminent Reality Key Market Drivers 100 90 From storage and IP traffic growth to the advancement 35% CAGR in Storage Capacity of technology across many market sectors, the drivers 80 that moved data transmission speeds from 1 GbE to 68 10 GbE over the past decade are now expanding as 60 forecasted, creating the need for 40 and 100 GbE. 49 Petabytes 40 37 10 GbE Growth 28 20 20 While the global Ethernet switch market experienced overall decline in 2009, the migration from 1 to 10 0 GbE continued in data centers across the world.
    [Show full text]
  • Towards 100 Gbps Ethernet: Development of Ethernet / Physical Layer Aspects
    SEMINAR ON TOPICS IN COMMUNICATIONS ENGINEERING 1 Towards 100 Gbps Ethernet: Development of Ethernet / Physical Layer Aspects Ömer Bulakci Abstract — Physical layer features of Ethernet from the first released clauses and ongoing architecture researches for 100 realization towards the 100 Gb Ethernet (100 GbE) development GbE are elaborated. have been considered. Comparisons of these features are made according to the standardized data rates. Feasible physical layer TABLE I options are then discussed for high data rates. Milestones of 802.3 IEEE Standard I. INTRODUCTION Clause Date of Bit Physical THERNET is the most widely deployed Local Area Name Release Rate Medium Network (LAN) protocol and has been extended to E 802.3a Single Metropolitan Area Networks (MAN) and Wide Area (Thin Ethernet) 1985 10 Mbps Thin Coaxial Networks (WAN) [1]. The major advantages that characterize (Cheapernet) Cable Ethernet can be stated as its cost efficiency, traditional tenfold bit rate increase (from 10 Mbps to 100 Gbps), simplicity, high 802.3i 1990 10 Mbps TP Copper transmission reliability and worldwide interoperability 802.3j 1993 10 Mbps Two MMFs between vendors [2]. TP Copper The first experimental Ethernet was developed during the 802.3u 1995 100 Mbps Two Fibers early 1970s by XEROX Corporation in a coaxial cable (Fast Ethernet) (MMF,SMF) network with a data rate about 3 Mbps [3]. The initial 802.3z 1998 1 Gbps MMF, SMF standardization process of Ethernet was started in 1979 by (Gigabit Ethernet) Digital Equipment Corporation (DEC), Intel and Xerox. In 802.3ab 1999 1 Gbps TP Copper 1980, DIX Standard known as the “Thick Ethernet” was 802.3ae 2002 10 Gbps MMF,SMF released.
    [Show full text]
  • XAUI V12.3 Logicore IP Product Guide (PG053)
    XAUI v12.3 LogiCOREDiscontinued IP Product Guide Vivado Design Suite PG053 December 5, 2018 NOTICE: This is the last release of this IP solution. While supported for Vivado® Design Suite 2018.3, this core will not be supported in the future releases. For more information, see AR 71454. IP Table of Contents IP Facts ChapterDiscontinued 1: Overview Additional Features . 6 About the Core. 6 Recommended Design Experience . 7 Applications . 7 Licensing and Ordering . 8 Feedback. 8 Chapter 2: Product Specification Standards Compliance . 10 Performance. 10 Resource Utilization. 11 Verification. 11 Port Descriptions . 12 Register Space . 30 Chapter 3: Designing with the Core General Design Guidelines . 63 Shared Logic . 64 Clocking: UltraScale Architecture . 65 Clocking: Zynq-7000, Virtex-7, Artix-7, and Kintex-7 Devices. .IP . 70 Multiple Core Instances. 77 Reset Circuits . 77 Receiver Termination: Virtex-7 and Kintex-7 FPGAs . 77 Transmit Skew . 77 Data Interface: Internal XGMII Interfaces . 78 Interfacing to the Transmit Client Interface. 79 Interfacing to the Receive Client Interface. 80 Configuration and Status Interfaces . 81 MDIO Interface. 81 Configuration and Status Vectors . 85 Debug Port . 87 XAUI v12.3 Product Guide Send Feedback 2 PG053 December 5, 2018 www.xilinx.com Chapter 4: Design Flow Steps Customizing and Generating the Core . 88 Output Generation. 92 Constraining the Core . 93 Simulation . 95 Synthesis and Implementation . 95 Chapter 5: Example Design ChapterDiscontinued 6: Test Bench Appendix A: Verification and Interoperability Simulation . 102 Hardware Testing. 102 Appendix B: Upgrading Device Migration . 103 Migrating to the Vivado Design Suite. 103 Upgrading in the Vivado Design Suite . 103 Appendix C: Debugging Designs Finding Help on xilinx.com .
    [Show full text]
  • Evolution of Ethernet Speeds: What's New and What's Next
    Evolution of Ethernet Speeds: What’s New and What’s Next Greg Hankins <[email protected]> NANOG 64 Bob Metcalfe’s 1972 sketch of his original “ethernet” vision 1 Image provided courtesy of Palo Alto Research Center Inc., a Xerox Company COPYRIGHT © 2015 ALCATEL-LUCENT. ALL RIGHTS RESERVED. NANOG 64 2015/06/03 Agenda 1. Ethernet Speed Evolution 2. What’s Next: 2.5 GE and 5 GE 3. What’s Next: 25 GE 4. What’s New: 40 GE 5. What’s New: 100 GE 6. What’s Next: 400 GE 2 COPYRIGHT © 2015 ALCATEL-LUCENT. ALL RIGHTS RESERVED. Ethernet Speed Evolution Over 40+ years New Speeds Driven by Diverse Market Requirements • Market requirements for Ethernet are changing for different applications - Speed - Distance - Cost • Different new speeds are needed for - Wireless access points: 2.5 GE and 5 GE - Servers: 25 GE - Core networks: 400 GE • New Ethernet speeds under development will address these different requirements Six New Ethernet Speeds May be Coming Soon – Same Amount as in the Past 30 Years Roadmap courtesy of the Ethernet Alliance: http://www.ethernetalliance.org/roadmap/ 3 COPYRIGHT © 2015 ALCATEL-LUCENT. ALL RIGHTS RESERVED. NEW 2.5/5 GE Applications (~2016) Higher Speed Ethernet Target Applications • Higher Speed Wireless Key Application Drivers • Large Cat 5e/6 Installed Base NEW 25 GE Applications (~2016) 25 25 10 10 GE GE GE • Data Center Access GE 40 40 • Server NICs GE GE 40 GE Applications MORE 100 100 400 • Data Center Aggregation and Core GE GE GE • Data Center Access 10 100 400 40 100 GE GE GE • Server NICs 10 GE GE 400 • Metro Core GE GE MORE 2.5/5 10 100 400 100 GE Applications GE GE GE GE • Service Provider Aggregation and Core 100 400 GE GE 100 400 • Data Center Core GE GE • Metro Core NEW 400 GE Applications (~2017) • Service Provider Core 10 25 40 GE 40 GE GE 10 25 • Large Data Center Core GE GE GE • Large Metro Core 4 COPYRIGHT © 2015 ALCATEL-LUCENT.
    [Show full text]
  • A Survey of 10 Gigabit Ethernet and Backplane Ethernet
    December 12, 2019 A Survey of 10 Gigabit Ethernet and Backplane Ethernet A Survey of 10 Gigabit Ethernet and Backplane Ethernet Jacob Li , [email protected] (A paper written under the guidance of Prof. Raj Jain) Download Abstract Ethernet is growing rapidly now, and its transmission rate is increased from 1000 bps to 100 Gbps and even 400 Gbps. Higher-speed Ethernet is on the way, and problems are followed. This paper introduces the procedure of high-speed Ethernet's development and Backplane's emergence and discusses issues of every development stage like interoperability between devices. The paper also discusses how technologies like Serializer/Deserializer (SerDes) and Auto-Negotiation solves those problems in practice and push the progress of high-speed Ethernet development. Keyword: Backplane Ethernet, 10 Gigabit Ethernet, SerDes, Auto-Negotiation, IEEE 802.3ap, 10GBASE, 40GBASE, Physical Layer Table of Contents: • 1. Introduction • 2. 10 Gigabit Ethernet Standard o 2.1 IEEE 802.3ae 10 Gigabit Ethernet PHY Structure o 2.2 10 Gigabit LAN Ethernet over Optical Fiber o 2.3 10 Gigabit WAN Ethernet over Optical Fiber o 2.4 10 Gigabit Ethernet over Twisted-Pair Cable • 3. SerDes • 4. Auto-Negotiation • 5. Summary • 6. References • 7. List of Acronyms 1. Introduction In networking, Ethernet plays a very important role and is widely used to provide connectivity within and between systems. Now, as Ethernet is growing faster, the Ethernet can even provide faster links over multiple media [McCoubrey16]. As the demand for high-speed communication technology increases, the Ethernet's deployment all over the world results in bandwidth requirement explosion.
    [Show full text]