DOCSLIB.ORG

Ammonium Iodide Aid

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Ammonium Iodide Aid AMMONIUM IODIDE AID CAUTIONARY RESPONSE INFORMATION 4. FIRE HAZARDS 7. SHIPPING INFORMATION 4.1 Flash Point: 7.1 Grades of Purity: NF; Reagent 99% Common Synonyms Solid White Odorless Not flammable 7.2 Storage Temperature: Ambient 4.2 Flammable Limits in Air: Not flammable 7.3 Inert Atmosphere: No requirement 4.3 Fire Extinguishing Agents: Not pertinent Sinks and mixes with water. 7.4 Venting: Open 4.4 Fire Extinguishing Agents Not to Be 7.5 IMO Pollution Category: Currently not available Stop discharge if possible. Keep people away. Used: Not pertinent Avoid contact with solid and dust; avoid inhalation. 4.5 Special Hazards of Combustion 7.6 Ship Type: Currently not available Isolate and remove discharged material. Products: Toxic and irritating fumes of 7.7 Barge Hull Type: Currently not available Notify local health and pollution control agencies. hydrogen iodide, iodine, and oxides of Protect water intakes. nitrogen may form in fire. 8. HAZARD CLASSIFICATIONS 4.6 Behavior in Fire: Compound may sublime Not flammable. in fire and condense on cold surfaces. 8.1 49 CFR Category: Not listed Fire POISONOUS GASES MAY BE PRODUCED IN FIRE. 4.7 Auto Ignition Temperature: Not pertinent 8.2 49 CFR Class: Not pertinent Irritating gases may be produced when heated. Wear goggles, self-contained breathing apparatus and rubber overclothing 4.8 Electrical Hazards: Not pertinent 8.3 49 CFR Package Group: Not listed. (including gloves). 4.9 Burning Rate: Not pertinent 8.4 Marine Pollutant: No 4.10 Adiabatic Flame Temperature: Not 8.5 NFPA Hazard Classification: Not listed CALL FOR MEDICAL AID. pertinent Exposure DUST 8.6 EPA Reportable Quantity: Not listed 4.11 Stoichometric Air to Fuel Ratio: Not Irritating to eyes, nose and throat. 8.7 EPA Pollution Category: Not listed pertinent If inhaled will cause coughing or difficult breathing. 8.8 RCRA Waste Number: Not listed If in eyes, hold eyelids open and flush with plenty of water. 4.12 Flame Temperature: Not pertinent If breathing has stopped, give artificial respiration. 4.13 Combustion Molar Ratio (Reactant to 8.9 EPA FWPCA List: Not listed If breathing is difficult, give oxygen. Product): Currently not available 4.14 Minimum Oxygen Concentration for 9. PHYSICAL & CHEMICAL PROPERTIES SOLID Combustion (MOCC): Not listed Irritating to skin and eyes. 9.1 Physical State at 15° C and 1 atm: Solid Harmful if swallowed. 9.2 Molecular Weight: 144.94 Remove contaminated clothing and shoes. 5. CHEMICAL REACTIVITY 9.3 Boiling Point at 1 atm: Not pertinent Flush affected areas with plenty of water. IF IN EYES, hold eyelids open and flush with plenty of water. 5.1 Reactivity with Water: No reaction 9.4 Freezing Point: Not pertinent IF SWALLOWED and victim is CONSCIOUS, have victim drink water 5.2 Reactivity with Common Materials: 9.5 Critical Temperature: Not pertinent or milk. Currently not available 9.6 Critical Pressure: Not pertinent IF SWALLOWED and victim is UNCONSCIOUS OR HAVING CONVULSIONS, 5.3 Stability During Transport: Stable 9.7 Specific Gravity: 2.56 at 20°C (solid) do nothing except keep victim warm. 5.4 Neutralizing Agents for Acids and Caustics: Not pertinent 9.8 Liquid Surface Tension: Not pertinent Effect of low concentrations on aquatic life is unknown. Water 5.5 Polymerization: Not pertinent 9.9 Liquid Water Interfacial Tension: Not May be dangerous if it enters water intakes. pertinent Pollution Notify local health and wildlife officials. 5.6 Inhibitor of Polymerization: Not pertinent Notify operators of nearby water intakes. 9.10 Vapor (Gas) Specific Gravity: Not pertinent 6. WATER POLLUTION 9.11 Ratio of Specific Heats of Vapor (Gas): Not pertinent 6.1 Aquatic Toxicity: 9.12 Latent Heat of Vaporization: Not pertinent Currently not available 9.13 Heat of Combustion: Not pertinent 1. CORRECTIVE RESPONSE ACTIONS 2. CHEMICAL DESIGNATIONS 6.2 Waterfowl Toxicity: Currently not Dilute and disperse 2.1 CG Compatibility Group: Not listed available 9.14 Heat of Decomposition: Not pertinent Stop discharge 2.2 Formula: NH4I 6.3 Biological Oxygen Demand (BOD): 9.15 Heat of Solution: 43 Btu/lb = 24 cal/g = 1.0 5 2.3 IMO/UN Designation: Not listed Currently not available X 10 J/kg 2.4 DOT ID No.: Not listed 9.16 Heat of Polymerization: Not pertinent 2.5 CAS Registry No.: 12027-06-4 6.4 Food Chain Concentration Potential: 2.6 NAERG Guide No.: Not listed None 9.17 Heat of Fusion: Currently not available 2.7 Standard Industrial Trade Classification: 6.5 GESAMP Hazard Profile: Not listed 9.18 Limiting Value: Currently not available 51481 9.19 Reid Vapor Pressure: Currently not 3. HEALTH HAZARDS available 3.1 Personal Protective Equipment: Dust mask; goggles or face shield; rubber gloves NOTES 3.2 Symptoms Following Exposure: Inhalation causes irritation of nose and throat. Contact with eyes causes irritation. 3.3 Treatment of Exposure: INHALATION: remove to fresh air. INGESTION: if significant amount has been ingested, get medical attention. EYES: flush with water. 3.4 TLV-TWA: Not listed. 3.5 TLV-STEL: Not listed. 3.6 TLV-Ceiling: Not listed. 3.7 Toxicity by Ingestion: Currently not available 3.8 Toxicity by Inhalation: Currently not available. 3.9 Chronic Toxicity: Currently not available 3.10 Vapor (Gas) Irritant Characteristics: Currently not available 3.11 Liquid or Solid Characteristics: Currently not available 3.12 Odor Threshold: Not pertinent 3.13 IDLH Value: Not listed. 3.14 OSHA PEL-TWA: Not listed. 3.15 OSHA PEL-STEL: Not listed. 3.16 OSHA PEL-Ceiling: Not listed. 3.17 EPA AEGL: Not listed JUNE 1999 AMMONIUM IODIDE AID 9.20 9.21 9.22 9.23 SATURATED LIQUID DENSITY LIQUID HEAT CAPACITY LIQUID THERMAL CONDUCTIVITY LIQUID VISCOSITY Temperature Pounds per cubic foot Temperature British thermal unit per Temperature British thermal unit inch Temperature Centipoise (degrees F) (degrees F) pound-F (degrees F) per hour-square foot-F (degrees F) N N N N O O O O T T T T P P P P E E E E R R R R T T T T I I I I N N N N E E E E N N N N T T T T 9.24 9.25 9.26 9.27 SOLUBILITY IN WATER SATURATED VAPOR PRESSURE SATURATED VAPOR DENSITY IDEAL GAS HEAT CAPACITY Temperature Pounds per 100 pounds Temperature Pounds per square inch Temperature Pounds per cubic foot Temperature British thermal unit per (degrees F) of water (degrees F) (degrees F) (degrees F) pound-F 34 155.000 N N N 36 156.000 O O O 38 157.099 T T T 40 158.099 42 159.099 P P P 44 160.099 E E E 46 161.199 R R R 48 162.199 T T T 50 163.199 I I I 52 164.199 N N N 54 165.199 E E E 56 166.299 N N N 58 167.299 T T T 60 168.299 62 169.299 64 170.400 66 171.400 68 172.400 70 173.400 72 174.400 74 175.500 76 176.500 78 177.500 80 178.500 82 179.599 84 180.599 JUNE 1999.
Load more

Recommended publications
  • NON-HAZARDOUS CHEMICALS May Be Disposed of Via Sanitary Sewer Or Solid Waste
    NON-HAZARDOUS CHEMICALS May Be Disposed Of Via Sanitary Sewer or Solid Waste (+)-A-TOCOPHEROL ACID SUCCINATE (+,-)-VERAPAMIL, HYDROCHLORIDE 1-AMINOANTHRAQUINONE 1-AMINO-1-CYCLOHEXANECARBOXYLIC ACID 1-BROMOOCTADECANE 1-CARBOXYNAPHTHALENE 1-DECENE 1-HYDROXYANTHRAQUINONE 1-METHYL-4-PHENYL-1,2,5,6-TETRAHYDROPYRIDINE HYDROCHLORIDE 1-NONENE 1-TETRADECENE 1-THIO-B-D-GLUCOSE 1-TRIDECENE 1-UNDECENE 2-ACETAMIDO-1-AZIDO-1,2-DIDEOXY-B-D-GLYCOPYRANOSE 2-ACETAMIDOACRYLIC ACID 2-AMINO-4-CHLOROBENZOTHIAZOLE 2-AMINO-2-(HYDROXY METHYL)-1,3-PROPONEDIOL 2-AMINOBENZOTHIAZOLE 2-AMINOIMIDAZOLE 2-AMINO-5-METHYLBENZENESULFONIC ACID 2-AMINOPURINE 2-ANILINOETHANOL 2-BUTENE-1,4-DIOL 2-CHLOROBENZYLALCOHOL 2-DEOXYCYTIDINE 5-MONOPHOSPHATE 2-DEOXY-D-GLUCOSE 2-DEOXY-D-RIBOSE 2'-DEOXYURIDINE 2'-DEOXYURIDINE 5'-MONOPHOSPHATE 2-HYDROETHYL ACETATE 2-HYDROXY-4-(METHYLTHIO)BUTYRIC ACID 2-METHYLFLUORENE 2-METHYL-2-THIOPSEUDOUREA SULFATE 2-MORPHOLINOETHANESULFONIC ACID 2-NAPHTHOIC ACID 2-OXYGLUTARIC ACID 2-PHENYLPROPIONIC ACID 2-PYRIDINEALDOXIME METHIODIDE 2-STEP CHEMISTRY STEP 1 PART D 2-STEP CHEMISTRY STEP 2 PART A 2-THIOLHISTIDINE 2-THIOPHENECARBOXYLIC ACID 2-THIOPHENECARBOXYLIC HYDRAZIDE 3-ACETYLINDOLE 3-AMINO-1,2,4-TRIAZINE 3-AMINO-L-TYROSINE DIHYDROCHLORIDE MONOHYDRATE 3-CARBETHOXY-2-PIPERIDONE 3-CHLOROCYCLOBUTANONE SOLUTION 3-CHLORO-2-NITROBENZOIC ACID 3-(DIETHYLAMINO)-7-[[P-(DIMETHYLAMINO)PHENYL]AZO]-5-PHENAZINIUM CHLORIDE 3-HYDROXYTROSINE 1 9/26/2005 NON-HAZARDOUS CHEMICALS May Be Disposed Of Via Sanitary Sewer or Solid Waste 3-HYDROXYTYRAMINE HYDROCHLORIDE 3-METHYL-1-PHENYL-2-PYRAZOLIN-5-ONE
    [Show full text]
  • Step-By-Step Guide to Better Laboratory Management Practices
    Step-by-Step Guide to Better Laboratory Management Practices Prepared by The Washington State Department of Ecology Hazardous Waste and Toxics Reduction Program Publication No. 97- 431 Revised January 2003 Printed on recycled paper For additional copies of this document, contact: Department of Ecology Publications Distribution Center PO Box 47600 Olympia, WA 98504-7600 (360) 407-7472 or 1 (800) 633-7585 or contact your regional office: Department of Ecology’s Regional Offices (425) 649-7000 (509) 575-2490 (509) 329-3400 (360) 407-6300 The Department of Ecology is an equal opportunity agency and does not discriminate on the basis of race, creed, color, disability, age, religion, national origin, sex, marital status, disabled veteran’s status, Vietnam Era veteran’s status or sexual orientation. If you have special accommodation needs, or require this document in an alternate format, contact the Hazardous Waste and Toxics Reduction Program at (360)407-6700 (voice) or 711 or (800) 833-6388 (TTY). Table of Contents Introduction ....................................................................................................................................iii Section 1 Laboratory Hazardous Waste Management ...........................................................1 Designating Dangerous Waste................................................................................................1 Counting Wastes .......................................................................................................................8 Treatment by Generator...........................................................................................................12
    [Show full text]
  • Prohibited and Restricted Chemical List
    School Emergency Response Plan and Management Guide Prohibited and Restricted Chemical List PROHIBITED AND RESTRICTED CHEMICAL LIST Introduction After incidents of laboratory chemical contamination at several schools, DCPS, The American Association for the Advancement of Science (AAAS) and DC Fire and Emergency Management Services developed an aggressive program for chemical control to eliminate student and staff exposure to potential hazardous chemicals. Based upon this program, all principals are required to conduct a complete yearly inventory of all chemicals located at each school building to identify for the removal and disposal of any prohibited/banned chemicals. Prohibited chemicals are those that pose an inherent, immediate, and potentially life- threatening risk, injury, or impairment due to toxicity or other chemical properties to students, staff, or other occupants of the school. These chemicals are prohibited from use and/or storage at the school, and the school is prohibited from purchasing or accepting donations of such chemicals. Restricted chemicals are chemicals that are restricted by use and/or quantities. If restricted chemicals are present at the school, each storage location must be addressed in the school's written emergency plan. Also, plan maps must clearly denote the storage locations of these chemicals. Restricted chemicals—demonstration use only are a subclass in the Restricted chemicals list that are limited to instructor demonstration. Students may not participate in handling or preparation of restricted chemicals as part of a demonstration. If Restricted chemicals—demonstration use only are present at the school, each storage location must be addressed in the school's written emergency plan. Section 7: Appendices – October 2009 37 School Emergency Response Plan and Management Guide Prohibited and Restricted Chemical List Following is a table of chemicals that are Prohibited—banned, Restricted—academic curriculum use, and Restricted—demonstration use only.
    [Show full text]
  • FLUID COMPATIBILITY CHART for Metal Threaded Fittings Sealed with Loctite¨ Sealants LIQUIDS, SOLUTIONS & SUSPENSIONS
    FLUID COMPATIBILITY CHART for metal threaded fittings sealed with Loctite® Sealants LIQUIDS, SOLUTIONS & SUSPENSIONS LEGEND: Bagasse Fibers.......................... Chlorobenzene Dry ................... Ferrous Chloride ...................... Ion Exclusion Glycol ................. Nickel Chloride.......................... All Loctite® Anaerobic Sealants are Barium Acetate ........................ Chloroform Dry......................... Ferrous Oxalate......................... Irish Moss Slurry...................... Nickel Cyanide ......................... Compatible Including #242®, 243, Barium Carbonate..................... Chloroformate Methyl............... Ferrous Sulfate10%.................. Iron Ore Taconite ..................... Nickel Fluoborate ..................... 542, 545, 565, 567, 569, 571, 572, Barium Chloride........................ Chlorosulfonic Acid .................. Ferrous Sulfate (Sat)................. Iron Oxide ................................ Nickel Ore Fines ....................... 577, 580, 592 Barium Hydroxide..................... Chrome Acid Cleaning .............. Fertilizer Sol ............................. Isobutyl Alcohol ....................... Nickel Plating Bright ................. † Use Loctite® #270, 271™, 277, 554 Barium Sulfate.......................... Chrome Liquor.......................... Flotation Concentrates.............. Isobutyraldehyde ..................... Nickel Sulfate ........................... Not Recommended Battery Acid .............................. Chrome Plating
    [Show full text]
  • Chemical Resistance 100% SOLIDS EPOXY SYSTEMS
    Chemical Resistance 100% SOLIDS EPOXY SYSTEMS CHEMICAL 8300 SYSTEM 8200 SYSTEM 8000 SYSTEM OVERKOTE PLUS HD OVERKOTE HD OVERKRETE HD BASED ON ONE YEAR IMMERSION TESTING –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Acetic Acid (0-15%) G II Acetonitrile LLG L Continuous Immersion Acetone (0-20%) LLL Acetone (20-30%) Suitable for continuous immersion in that chemical (based on LLG Acetone (30-50%) L G I ONE YEAR testing) to assure unlimited service life. Acetone (50-100%) G II Acrylamide (0-50%) LLL G Short-Term Exposure Adipic Acid Solution LLL Alcohol, Isopropyl LLL Suitable for short-term exposure to that chemical such as Alcohol, Ethyl LLG secondary containment (72 hours) or splash and spill Alcohol, Methyl LLI (immediate clean-up). Allyl Chloride LLI Allylamine (0-20%) L L I Allylamine (20-30%) L G I I Not Suitable Allylamine (30-50%) GGI Not suitable for any exposure to that chemical. Aluminum Bromide LL– Aluminum Chloride L L – Aluminum Fluoride (0-25%) L L – This chart shows chemical resistance of our various Aluminum Hydroxide LLL 1 topping materials (90 mils – ⁄4"). These ratings are based on Aluminum Iodide LL– temperatures being ambient. At higher temperatures, chemical Aluminum Nitrate LL– resistance may be effected. When chemical exposure is Aluminum Sodium Chloride L L – minimal to non-existent, a 9000 System–FlorClad™ HD or Aluminum Sulfate LLL 4600 System– BriteCast™ HD may be used. Alums L L L 2-Aminoethoxyethanol Resistance data is listed with the assumption that the material GGG has properly cured for at least four days, at recommended Ammonia – Wet L L – temperatures, prior to any chemical exposure.
    [Show full text]
  • Quaternary Ammonium & Phosphonium Salts * Phase
    Quaternary Ammonium & Phosphonium Salts * Phase Transfer Catalyst We are a manufacturer, exporter & supplier of Quaternary Ammonium/Phosphonium Salts (QUATS) & phase transfer catlayst short chain & long chain since 2009. Please read our products that needs every chemicals & pharmaceutical industries in India & Worldwide. Our Introduction Phase Transfer Catalyst * Quaternary Salts Manufacturer We are known for our quality assurance and the quality products we can supply at the competitive prices. Company markets its products at most competitive rates. Material Safety Data Sheets are provided to customers for storage and handling. The company provides after sales service and also technical consultation to its customers. Company is highly conscious about prevention of environmental pollution and has adopted mechanism to ensure environmental protection. The employees are periodically educated about house-keeping and safety aspects pertaining to manufacturing, storage and handling as most of the products are pyrophoric in nature. We are Manufacturers, Exporters and Suppliers of various chemicals, drugs intermediate s, Phase Transfer Catalysts for a variety of industrial markets. Our expertise comes from the long experience that we have in the chemical industry. Innovative approach and competitive price have guided us to success. Timely delivery & quality assurance is another important aspect in our success. Quaternary Ammonium & Phosphonium Salts & Phase Transfer Catalyst • Chlorhexidine Gluconate 20% Solution BP/EP/USP • Propyl Paraben BP
    [Show full text]
  • Ajax Finechem Product Catalogue 3510 585 6
    ACE AJAX FINECHEM PRODUCT CATALOGUE 3510 ACETONE, HPLC GRADE, BURDICK & JACKSON, CAT. AH010 Assay ……………………………………………………….. 99.9% min. Maximum limit of impurities (%) Water ……………………………………………………….. 0.5 Residue ……………………………………………………… 3mg/L Max. UV. Absorbance: λ(nm) 330 340 350 375 400 Absorbance 1.000 0.080 0.010 0.005 0.005 Pack Size: 4L 585 ACETONE, SPECTROSOL Description: clear liquid; characteristic odour. For U.V. spectroscopy. Assay (by GLC) ……………………………………………….. 99.5% min. Colour (APHA) …………………………………............ 10 max. Density (@ 25°C ) ……………………………………… 0.7857g/mL max. U.V absorbance λ(nm) 330 340 350 400 Max abs. 1.00 0.1 0.02 0.01 Maximum limit of impurities (%) R.A.E. ……………………………………………………….. 0.001 Sol. in H2O ………………………………………………… To pass test Titratable acid …………………………………………… 0.03 mmol H Titratable base ………………………………………….. 0.06 mmol OH Aldehyde (as HCHO) ………………………………….. 0.002 CH3OH ………………………………………………………. 0.05 Propan-2-ol ……………………………………………….. 0.05 Subs. red. KMnO4 (as O) …………………………….. 0.0005 H2O ………………………………………………………….. 0.5 Conforms to ACS Pack Size: 500mL 6 ACETONE, UNIVAR Description: clear liquid with a characteristic odour. Assay( by GLC) ………………………………………….. 99.5% min. Colour (APHA) …………………………………………… 10 max. Density (@ 25oC) ……………………………….......... 0.7857g/mL max. Maximum limit of impurities (%) R.A.E. ……………………………………………………….. 0.001 Cd …………………………………………………. 0.000005 Sol. in H2O …………………………………………………. To pass test Pb ………………………………………………….. 0.000005 Titratable acid ……………………………………………. 0.03 mmol H Ca………………………………………………….. 0.00005 Titratable base …………………………………………… 0.06 mmol OH Zn ………………………………………………….. 0.00005 Aldehyde (as HCHO) …………………………………… 0.002 Na …………………………………………………. 0.00005 Methanol, Propan-2-ol (each) ………………………. 0.05 K …………………………………………………….. 0.00005 Fe …………………………………………………………….. 0.00002 Cr…………………………………………………… 0.000002 Subs. red. KMnO4`……………………………………….. To pass test Co ………………………………………………….. 0.000002 H2O …………………………………………………………… 0.5 Cu ………………………………………………….. 0.000002 Al ……………………………………………………………… 0.00001 Mn ………………………………………………….
    [Show full text]
  • Lab & Reagent Chemicals Pat Impex
    LAB CHEMICALS & REAGENTS – FINE CHEMICALS Manufacturer, Suppliers & Distributor MANUFACTURER SUPPLIER AND DISTRIBUTOR OF LABORATORY CHEMICALS, FINE CHEMICALS, AR LR GRADE, SUPERFINE CHEMICALS IN VADODARA, GUJARAT, INDIA. Our Introduction LAB CHEMICALS, REAGENTS GRADE CHEMICALS, BULK PACKING Our Range of Products • Laboratory chemicals & Reagents • Fine Chemicals AR LR ACS PH EUR • General Chemicals by Trading • Nanotechnology chemicals LABORATORY CHEMICALS, REAGENTS, FINE CHEMICALS • Acetamide Pure • Acetanilide Extrapure • Adipic Acid Pure • Acetanilide Exiplus • Aerosil 200 (Fumed Silica Gel) • Acetic Acid Glacial Extrapure • Agar Powder Regular Grade • Acetic Acid Glacial Extrapure Ar • Agar Powder Exiplus • Acetic Acid Glacial Extrapure Ar,acs,exiplus • Agar Powder Extrapure Bacto Grade • Acetic Acid Dried • Agar Granulated Bacto Grade • Acetic Acid For Hplc • Ajowan Seed Oil Extrapure • Acetic Acid Glacial For Molecular Biology • L-alanine Extrapure Chr • Acetone Pure • Aliquat 336 • Acetone Extrapure Ar • Alloxan Monohydrate • Acetone Extrapure Ar,acs,exiplus • Allyl Alcohol Pure • Acetone Gc-hs • Allylamine Pure • Acetone For Hplc & Uv Spectroscopy • Allyl Bromide Pure • Acetone For Uv Spectroscopy • Almond Oil Pure • Acetone Electronic Grade • Aluminium Ammonium Sulphate Dodecahydrate Pure • Acetone For Molecular Biology • Aluminium Ammonium Sulphate Dodecahydrate Extrapure Ar • Acetone -d6 For Nmr Spectroscopy • Aliminium Atomic Absorption Std.soln.aas • Acetonitrile(Acn)extrapure • Aluminium Metal Powder • Acetonitrile(Acn)extrapure
    [Show full text]
  • Chemical Compatibility Storage Group
    CHEMICAL SEGREGATION Chemicals are to be segregated into 11 different categories depending on the compatibility of that chemical with other chemicals The Storage Groups are as follows: Group A – Compatible Organic Acids Group B – Compatible Pyrophoric & Water Reactive Materials Group C – Compatible Inorganic Bases Group D – Compatible Organic Acids Group E – Compatible Oxidizers including Peroxides Group F– Compatible Inorganic Acids not including Oxidizers or Combustible Group G – Not Intrinsically Reactive or Flammable or Combustible Group J* – Poison Compressed Gases Group K* – Compatible Explosive or other highly Unstable Material Group L – Non-Reactive Flammable and Combustible, including solvents Group X* – Incompatible with ALL other storage groups The following is a list of chemicals and their compatibility storage codes. This is not a complete list of chemicals, but is provided to give examples of each storage group: Storage Group A 94‐75‐7 2,4‐D (2,4‐Dichlorophenoxyacetic acid) 94‐82‐6 2,4‐DB 609-99-4 3,5-Dinitrosalicylic acid 64‐19‐7 Acetic acid (Flammable liquid @ 102°F avoid alcohols, Amines, ox agents see SDS) 631-61-8 Acetic acid, Ammonium salt (Ammonium acetate) 108-24-7 Acetic anhydride (Flammable liquid @102°F avoid alcohols see SDS) 79‐10‐7 Acrylic acid Peroxide Former 65‐85‐0 Benzoic acid 98‐07‐7 Benzotrichloride 98‐88‐4 Benzoyl chloride 107-92-6 Butyric Acid 115‐28‐6 Chlorendic acid 79‐11‐8 Chloroacetic acid 627‐11‐2 Chloroethyl chloroformate 77‐92‐9 Citric acid 5949-29-1 Citric acid monohydrate 57-00-1 Creatine 20624-25-3
    [Show full text]
  • United States Patent Office Patented Apr
    3,574,851 United States Patent Office Patented Apr. 3, 1971 2 trihexyl (4-nitrosotolyl)ammonium bromide, 3,574,851 dimethylhexyl (4-nitrosotolyl)ammonium chloride, FUNGCDAL METHOD EMPLOYING NEW dihexylmethyl (4-nitrosotolyl)ammonium iodide, QUATERNARY AMMONUM HALDES Asher A. Hyatt, Lexington, Mass., assignor to Monsanio diethylpentyl (4-nitrosotolyl)ammonium fluoride, Research Corporation, St. Louis, Mo. butyldipropyl (4-nitrosotolyl)ammonium bromide, No Drawing. Original application Dec. 3, 1965, Ser. No. butylhexylmethyl (4-nitrosotolyl)ammonium chloride, 531,320, now Patent No. 3,390,178, dated June 25, trimethyl(4-nitrosoxylyl)ammonium fluoride, 1968. Divided and this application Dec. 20, 1967, Ser. triethyl (4-nitrosoxylyl)ammonium chloride, No. 721,893 tripropyl (4-nitrosoxylyl)ammonium bromide, nt. C. AOn 9/20 O tributyl (4-nitrosoxylyl)ammonium iodide, U.S. C. 424-329 2 Claims tripentyl (4-nitrosoxylyl)ammonium fluoride, trihexyl (4-nitrosoxylyl)ammonium chloride, dimethylhexyl (4-nitrosoxylyl)ammonium fluoride, ABSTRACT OF THE DISCLOSURE dihexylmethyl (4-nitrosoxylyl)ammonium chloride, A method of controlling soil fungi employing certain 15 diethylphentyl (4-nitrosoxylyl)ammonium bromide, new nitroso substituted aryl derivatives of trialkyl ammo butyldipropyl (4-nitrosoxylyl)ammonium iodide, nium halides. butylhexylmethyl (4-nitrosoxylyl)ammonium fluoride, trimethyl(4-nitrosonaphthyl)ammonium iodide, triethyl (5-nitrosonaphthyl)ammonium fluoride, This is a division of application Ser. No. 531,320 filed tripropyl (6-nitrosonaphthyl)ammonium chloride, Dec. 3, 1965, now Patent No. 3,390,178. tributyl (4-nitrosonapththyl)ammonium bromide, This invention relates to the reaction of nitroso sub tripentyl (5-nitrosonaphthyl)ammonium iodide, stituted aromatic hydrocarbon derivatives of dialkyl trihexyl (6-nitrosonaphthyl)ammonium fluoride, amines with alkyl halides and to the products thereof.
    [Show full text]
  • Ammonium Iodide
    Safety data sheet according to Regulation (EC) No. 1907/2006 (REACH) Ammonium iodide ≥99 %, p.a., ACS article number: 9818 date of compilation: 2016-05-25 Version: 2.0 en Revision: 2021-08-06 Replaces version of: 2016-05-25 Version: (1) SECTION 1: Identification of the substance/mixture and of the company/ undertaking 1.1 Product identifier Identification of the substance Ammonium iodide ≥99 %, p.a., ACS Article number 9818 Registration number (REACH) It is not required to list the identified uses be- cause the substance is not subject to registration according to REACH (< 1 t/a). EC number 234-717-7 CAS number 12027-06-4 1.2 Relevant identified uses of the substance or mixture and uses advised against Relevant identified uses: Laboratory chemical Laboratory and analytical use Uses advised against: Do not use for products which come into contact with foodstuffs. Do not use for private purposes (household). 1.3 Details of the supplier of the safety data sheet Carl Roth GmbH + Co KG Schoemperlenstr. 3-5 D-76185 Karlsruhe Germany Telephone:+49 (0) 721 - 56 06 0 Telefax: +49 (0) 721 - 56 06 149 e-mail: [email protected] Website: www.carlroth.de Competent person responsible for the safety data :Department Health, Safety and Environment sheet: e-mail (competent person): [email protected] 1.4 Emergency telephone number Name Street Postal Telephone Website code/city National Poisons Information Dudley Rd B187QH 844 892 0111 Service Birmingham City Hospital United Kingdom (en) Page 1 / 16 Safety data sheet according to Regulation (EC) No. 1907/2006 (REACH) Ammonium iodide ≥99 %, p.a., ACS article number: 9818 SECTION 2: Hazards identification 2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 (CLP) Section Hazard class Cat- Hazard class and Hazard egory category statement 3.2 Skin corrosion/irritation 2 Skin Irrit.
    [Show full text]
  • Chemical Capabilities Listing Laboratory, R&D, Industrial and Manufacturing Applications
    Page 1 of 3 Chemical Capabilities Listing Laboratory, R&D, Industrial and Manufacturing Applications Acacia, Gum Arabic Barium Oxide Chromium Trioxide Acetaldehyde Bentonite, White Citric Acid, Anhydrous Acetamide Benzaldehyde Citric Acid, Monohydrate Acetanilide Benzoic Acid Cobalt Oxide Acetic Acid Benzoyl Chloride Cobaltous Acetate Acetic Anhydride Benzyl Alcohol Cobaltous Carbonate Acetone Bismuth Chloride Cobaltous Chloride Acetonitrile Bismuth Nitrate Cobaltous Nitrate Acetyl Chloride Bismuth Trioxide Cobaltous Sulfate Aluminium Ammonium Sulfate Boric Acid Cottonseed Oil Aluminon Boric Anhydride Cupferron Aluminum Chloride, Anhydrous Brucine Sulfate Cupric Acetate Aluminum Chloride, Hexahydrate n-Butyl Acetate Cupric Bromide Aluminum Fluoride n-Butyl Alcohol Cupric Carbonate, Basic Aluminum Hydroxide tert-Butyl Alcohol Cupric Chloride Aluminum Nitrate Butyric Acid Cupric Nitrate Aluminum Oxide Cadmium Acetate Cupric Oxide Aluminum Potassium Sulfate Cadmium Carbonate Cupric Sulfate, Anhydrous Aluminum Sulfate Cadmium Chloride, Anhydrous Cupric Sulfate, Pentahydrate 1-Amino-2-Naphthol-4-Sulfonic Acid Cadmium Chloride, Hemipentahydrate Cuprous Chloride Ammonium Acetate Cadmium Iodide Cuprous Oxide, Red Ammonium Bicarbonate Cadmium Nitrate Cyclohexane Ammonium Bifluoride Cadmium Oxide Cyclohexanol Ammonium Bisulfate Cadmium Sulfate, Anhydrous Cyclohexanone Ammonium Bromide Cadmium Sulfate, Hydrate Devarda's Alloy Ammonium Carbonate Calcium Acetate Dextrose, Anhydrous Ammonium Chloride Calcium Carbide Diacetone Alcohol Ammonium Citrate
    [Show full text]