Perfect, Low Cost STL Solution
Total Page:16
File Type:pdf, Size:1020Kb
Perfect, Low Cost STL Solution “We use BRIC-Links for our main STL on107.7 FM, one of the satellite stations for WTOP, with very good results. I was pleasantly surprised at just how easy it is to set up a pair of BRIC-Links out of the box. I had my final configuration within ten minutes of powering up the units. We’re running AAC audio that sounds every bit as good as the circuits to our other transmitter sites. We had been struggling for about a year to find a reliable audio STL to our transmitter site on top of a mountain in Warrenton, VA. The telco lines degraded every time it rained, causing dropouts in our T1 and ISDN service. This summer, when services that did not rely on the leaky copper cables were finally built out at the site, we tried a pair of BRIC-Links on our new broadband Internet service. We’ve kept our transmitter on them ever since. We’re going to be purchasing more pairs of these units to feed audio to our other sites.” David Kolesar, Senior Broadcast Engineer Bonneville International Corporation WTOP / WFED, Washington, DC We design our products to be dependable. So, you wouldn’t think we’d be surprised by how many people put our products on the line every day. But, we are. And, honestly, we’re kind of proud, too. No matter what the market size, Comrex customers depend on BRIC-Link Stereo IP Codecs to deliver reliable, high quality audio over dedicated data links at a reasonable price. Whether you are replacing costly satellite or telco transmission links, sending program audio to multiple locations or connecting two studios, Put Comrex on the Line BRIC-Link will do the job with minimal setup and maximum performance. Contact BSW today to find out what so many Comrex customers already know. www.comrex.com BRIC_LinkSTL_Ad.indd 1 12/8/10 10:46:01 AM order/info: 1·800·426·8434 • www.bswusa.com Crown FM Transmitters Crown FM Transmitters are available in sizes from 30 to 4000 watts. They include built-in audio processing and stereo generation in a rugged, compact unit. They’re complete standalone systems: audio in, radio signal out. Each model provides excellent signal quality with a variety of features including quick setup, built-in digital metering and diagnostics, user-selectable operating frequency range of 87-108 MHz, operates from 100-240VAC. With Teflon circuit boards and copper heat spreaders in the RF chain, the unit functions with less heat for improved life span. BSW sells Crown at the lowest prices in the industry. Call us for FM30T 30-watt FM List $4,195.00 your Crown FM transmitter today. Crown FM FM150T 150-watt FM List $5,795.00 Translators (look for the R in the model number) FM300T 300-watt FM List $6,895.00 include an internal receiver and a powerful FM600T 600-watt FM List $8,995.00 transmitter. Just what you need to get your FM1000T 1-kw FM List $15,795.00 signal to the furthest reaches of your coverage FM2000T 2-kw FM List $20,995.00 area. Call BSW today for the lowest price quote. FM4000T 4-kw FM List $41,885.00 FM30R 30-watt FM translator List $4,195.00 FM150R 150-watt FM translator List $5,795.00 Call BSW For Lowest Price: 800-426-8434 FM300R 300-watt FM translator List $6,895.00 FM600R 600-watt FM translator List $8,995.00 Armstrong AM and FM Transmitters BSW is proud to carry the full line of Armstrong’s rock solid FM and AM transmitters (compatible with HD Radio), designed for continuous use and celebrated for high reliability. Their STX series of solid-state FM transmitters features advanced thermostatic protection, a CD-quality Exciter, metering/alarm indications and redundant power supplies. Available models range from 650W to 12.5 kW. Their single tube T2 series of FM transmitters boasts a grounded grid, broadband PA design with no neutralization, exceptional tube life and the lowest possible noise levels. Also featuring comprehensive thermostatic protection, this series is available in models from 10 kW to 50 kW. The compact X series of AM transmitters offers high quality audio with optimized multiphase modulation and 90% PA efficiency. 500W and 1kW models are available. Call BSW to find the right Armstrong model for your needs! FM2500B 2.5kW solid-state FM List $18,250.00 FM12500B 12.5kW solid-state FM List $89,825.00 FM10000T2 10kW single tube FM List $44,750.00 FM35000T2 35kW single tube FM List $74,850.00 X500B 500W solid-state AM List $8,850.00 X1000B 1000W solid-state AM List $10,950.00 Call BSW For Lowest Price: 800-426-8434 QEI Quantum PTEK FM Transmitters FM Transmitters Designed and manufactured in the Designed for years of trouble free service, these USA, PTEK solid-state, no-tune FM totally solid-state FM transmitters provide an exciters/transmitters cover 150 to unsurpassed broadcast signal. 500 watt power ranges and offer full The Quantum M-Series of 1.2 to 5.4 kilowatt remote control ability. All three models, transmitters use modular power amplifiers and the 150-watt FM150ES, the 300-watt are available in 600 watt increments. You can buy FM300ES and the 500-watt FM500ES precisely the amount of power you need. have built-in FSK ID (programmable from the front panel) for Translator For broadband, the Quantum MBB-Series of 2 use. Frequency stability is ensured kilowatt and 5 kilowatt broadband solid-state by using PLL (phase locked loop) transmitters also feature modular power amplifiers frequency synthesis from a highly comprised of two FETs combined for 500 Watts stable crystal oscillator. The Series of broadband output power. They boast a new includes over-temperature protection Super-Linear FMO for superior performance. Both and VSWR fold back to protect the unit the 2-kilowatt Quantum M2BB and the 5-kilowatt by automatically reducing power to a Quantum M5BB operate with high efficiency, giving safe operating level. Digital front panel you additional savings in power consumption and metering indicates forward and reverse reduced heat loads. RF power; deviation; final output volts For even higher power QEI transmitters, such and amps. The frequency is easily set as QEI’s 30 kW with exciter, call your BSW from the front panel. Meets or exceeds all FCC and CCIR standards. The sales representative. FM150ES & FM300ES are FCC type certified for use on LPFM stations. Call BSW with your requirements. FM150ES 150W FM Exciter/Transmitter List $3,700.00 FM300ES 300W FM Exciter/Transmitter List $5,000.00 FM500ES 500W FM Exciter/Transmitter List $6,000.00 BSW Has Everything FM500 500W FM Power Amplifier List $5,000.00 You Need in One Stop Call BSW For Lowest Price: 800-426-8434 64 TRANSMITTERS order/info: 1·800·426·8434 • www.bswusa.com Audemat Digiplexer 214 Audio Processors The Audemat Digiplexer 214 is a unique digital audio processing product (available in 2- or 4-band versions) that incorporates a digital stereo encoder, Standard RDS encoder and TCP/IP connectivity, as well as additional innovative options such as an Ecreso (by Audemat) Next FM – FM Exciter and More 80 GB embedded audio backup hard drive, or Full RDS encoder— Combining Ecreso’s know-how in FM transmitters and Audemat’s expertise in RDS, NEXT FM is a all in a rugged 1U rackable enclosure. The Digiplexer’s audio new generation of FM exciter available in 2 different power ranges: 20W or 100W. Besides classic processor operates at a sampling frequency of 192 kHz for the broadcasting functions, NEXT FM boasts additional and innovative peripheral features such as stereo main audio processing and 1.5 MHz for the final limiter to deliver encoding, state of the art FM/HD/DAB digital sound processing, RDS encoding, 3 levels of audio the highest quality sonic signature while maintaining a loud and back up, as well as the capability to manage a 1+1 installation and perform preventive maintenance competitive sound. with embedded broadcast test equipment. It boasts low distortion (< 0.05 %) and the best FM S/N DIGIPLEXER214-2B 2-band processor List $3,990.00 ratio (> 80 dB). It also has a very good channel separation up to 50 dB over the whole band and PLL DIGIPLEXER214-4B 4-band processor List $6,990.00 controlled by microprocessor. It is adjustable from 2 to 20W or 10 to 100W (depending on version). DIGIPLEXERRDS Full RDS encoder option List $890.00 NEXTFM20WSTANDARD 20W standard transmission package List $4,650.00 DIGIPLEXERHDD 80GB hard drive option List $450.00 NEXTFM100WSTANDARD 100W standard transmission package List $5,600.00 Call BSW For Lowest Price: 800-426-8434 Call BSW For Lowest Price: 800-426-8434 RF Transmission BSW carries everything you need from the best names in the business. On the next 6 pages, you’ll find antennas, loads, measurement, protection and all transmission accessories. MARK ANTENNAS COAXIAL DYNAMICS Transmission System Components Call BSW For Lowest Price: 800-426-8434 Loads RF Safety Switches Resistive loads for transmitter testing off-line. Power ranges from 5KW to 50KW. Please note that this is only a sampling. Contact Dielectric your BSW professional for additional items. R001A23501 3-1/8” RF Lockout / Tagout List $9,074.00 Air Cooled Altronic Combiners / Splitters 6705E1 5 KW Load, 1 5/8” Eia Flange List $2,966.00 Combiners permit two transmitters to share a common antenna. 6405N 5 KW Load , N-Connector List $2,002.00 Splitters allow two receivers to share a common antenna.