Lab-Specific Chemical Hygiene Plan (CHP) Safinya Laboratories

Total Page:16

File Type:pdf, Size:1020Kb

Lab-Specific Chemical Hygiene Plan (CHP) Safinya Laboratories UCSB Lab-specific Chemical Hygiene Plan Lab-Specific Chemical Hygiene Plan (CHP) General Information & Standard Operating Procedures (SOPs) for the Safinya Laboratories (MRL rooms 1012, 1012B, 1016, 1024, 1032) Chemical Hygiene Officer (CHO): David Vandenberg ([email protected]) KE, Rev. 3/22/19 UCSB Lab-specific Chemical Hygiene Plan This page intentionally left blank 2 KE, Rev. 3/22/19 UCSB Lab-specific Chemical Hygiene Plan Table of Contents Table of Contents ________________________________________________________3 Preface ________________________________________________________________9 Introduction ___________________________________________________________10 Twelve Commandments for Lab Safety ____________________________________11 UCSB Laboratory Worker Responsibilities _________________________________12 General Laboratory Information _________________________________________13 Laboratory Supervisor (PI) ___________________________________________________________ 13 Laboratory Locations (Building /Rooms) ________________________________________________ 13 Laboratory Safety Coordinators (Safety Czars) ____________________________________________ 13 Department Information (MRL) __________________________________________14 Department Safety Representative / Hazard Communication Coordinator _______________________ 14 Location of the Department Safety Bulletin Board _________________________________________ 14 Location of MRL Building Emergency Assembly Point (EAP) _______________________________ 14 Emergency Information _________________________________________________15 Emergency procedures ___________________________________________________15 Evacuation procedures ___________________________________________________15 First-aid kit ____________________________________________________________15 Spill cleanup materials ___________________________________________________15 Laboratory monitors and alarms ____________________________________________16 Fires _________________________________________________________________16 Fire alarm and Evacuation Guidelines ___________________________________________________ 16 Reporting a fire ____________________________________________________________________ 16 Fire Extinguishers __________________________________________________________________ 16 In the Event of an Injury __________________________________________________17 Serious Injuries ____________________________________________________________________ 17 Other Injuries ______________________________________________________________________ 17 Health & Safety References ______________________________________________18 NOTE: Safety Data Sheets (SDS) (formerly known as Material Safety Data Sheets/MSDS): ____ 18 Written Safety Resources & References ______________________________________18 Electronic Safety Resources & References ___________________________________19 Important Phone Numbers and Contact List ________________________________22 Emergency phone numbers ___________________________________________________________ 22 Other important phone numbers _______________________________________________________ 22 Contact information for Lab members and Amanda Strom ___________________________________ 25 Safinya Lab Chores_____________________________________________________26 Earthquake Safety _____________________________________________________26 3 KE, Rev. 3/22/19 UCSB Lab-specific Chemical Hygiene Plan Lab Safety ____________________________________________________________26 Introduction ____________________________________________________________26 Safety Training Requirements _____________________________________________27 Fundamental Lab Safety Rules and Precautions ________________________________28 General __________________________________________________________________________ 28 Lab Equipment ____________________________________________________________________ 29 Electrical Safety ____________________________________________________________________ 29 Gas cylinder handling _______________________________________________________________ 29 Centrifuge Safety ___________________________________________________________________ 30 Pipetting Safety/Ergonomics __________________________________________________________ 30 Chemical Safety ________________________________________________________30 A Humorous View of Chemical Safety OR What to Look Out For ____________________________ 31 Transporting Chemicals ______________________________________________________________ 31 Fume Hood Usage __________________________________________________________________ 31 Identifying Chemical Hazards _____________________________________________32 Chemical safety labels _______________________________________________________________ 32 Communicating Safety and other Lab Issues __________________________________34 Personal Protective Equipment (PPE) _______________________________________34 Safety Glasses and Other Eye Protection ________________________________________________ 34 Clothing requirements _______________________________________________________________ 35 Closed-Toe Footwear _______________________________________________________________ 35 Lab coats _________________________________________________________________________ 35 Communal PPE ____________________________________________________________________ 36 Gloves ___________________________________________________________________________ 37 Glove Selection Chart _______________________________________________________________ 39 The Laboratory Hazard Assessment Tool (“LHAT”) ____________________________41 Main MRL Labs ___________________________________________________________________ 42 Cell Lab __________________________________________________________________________ 43 LOM area _________________________________________________________________________ 43 Fridges and Freezers _____________________________________________________44 Some Best Lab Practices __________________________________________________44 Using Eppendorf-type pipettes: ________________________________________________________ 44 Labeling of Samples, Solutions etc. _________________________________________45 Lab Safety Equipment ____________________________________________________46 Emergency Showers and Eyewash Stations ______________________________________________ 46 Spills and Exposure to Hazardous Chemicals _________________________________46 Emergency procedure _______________________________________________________________ 46 First Aid After Exposure to Hazardous Chemicals _________________________________________ 46 Spill Cleanup ______________________________________________________________________ 47 Disposal of Hazardous Waste ______________________________________________47 Chemical Waste Disposal ____________________________________________________________ 47 Proper Hazardous Waste Segregation ___________________________________________________ 47 Collecting and Storing Hazardous Waste ________________________________________________ 49 Labeling Hazardous Waste ___________________________________________________________ 49 4 KE, Rev. 3/22/19 UCSB Lab-specific Chemical Hygiene Plan Proper Waste Disposal / EH&S Pickup __________________________________________________ 50 Sharps disposal _________________________________________________________50 Glass Disposal _____________________________________________________________________ 50 Disposal of Razor Blades, Needles, etc. _________________________________________________ 50 Completing Work in the Lab – A Checklist _________________________________51 Get Started ________________________________________________________________________ 51 Get Clear _________________________________________________________________________ 51 Stay Connected ____________________________________________________________________ 52 Standard Operating Procedures (SOPs) ____________________________________53 Background: Standard Operating Procedures __________________________________53 SOP: Use of Acrylonitrile ________________________________________________55 Date of last revision to SOP: Aug. 2014 – Kai Ewert _______________________________________ 55 PI approval of SOP: _________________________________________________________________ 55 Scope of SOP ______________________________________________________________________ 55 Compound information ______________________________________________________________ 55 Approval Required _________________________________________________________________ 55 General precautions _________________________________________________________________ 55 Personal Protective Equipment ________________________________________________________ 56 Engineering/Ventilation Controls ______________________________________________________ 56 Handling, Storage, Cleanup, First Aid, and Disposal Requirements ____________________________ 56 Additional Information ______________________________________________________________ 57 LCSS for ACRYLONITRILE _____________________________________________58 Documentation of Training – SOP Use of Acrylonitrile _________________________60 SOP: Use of Benzene ____________________________________________________61 Date of last revision to SOP: Aug. 2014 – Kai Ewert _______________________________________ 61 PI approval of SOP: _________________________________________________________________ 61 Scope of SOP ______________________________________________________________________ 61 Compound information ______________________________________________________________
Recommended publications
  • Gelred® and Gelgreen® Safety Report
    Safety Report for GelRed® and GelGreen® A summary of mutagenicity and environmental safety test results from three independent laboratories for the nucleic acid gel stains GelRed® and GelGreen® www.biotium.com General Inquiries: [email protected] Technical Support: [email protected] Phone: 800-304-5357 Conclusion Overview GelRed® and GelGreen® are a new generation of nucleic acid gel stains. Ethidium bromide (EB) has been the stain of choice for nucleic acid gel They possess novel chemical features designed to minimize the chance for staining for decades. The dye is inexpensive, sufficiently sensitive and very the dyes to interact with nucleic acids in living cells. Test results confirm that stable. However, EB is also a known powerful mutagen. It poses a major the dyes do not penetrate latex gloves or cell membranes. health hazard to the user, and efforts in decontamination and waste disposal ultimately make the dye expensive to use. To overcome the toxicity problem In the AMES test, GelRed® and GelGreen® are noncytotoxic and of EB, scientists at Biotium developed GelRed® and GelGreen® nucleic acid nonmutagenic at concentrations well above the working concentrations gel stains as superior alternatives. Extensive tests demonstrate that both used in gel staining. The highest dye concentrations shown to be non-toxic dyes have significantly improved safety profiles over EB. and non-mutagenic in the Ames test for GelRed® and GelGreen® dyes are 18.5-times higher than the 1X working concentration used for gel casting, and 6-times higher than the 3X working concentration used for gel staining. This Dye Design Principle is in contrast to SYBR® Safe, which has been reported to show mutagenicity At the very beginning of GelRed® and GelGreen® development, we made a in several strains in the presence of S9 mix (1).
    [Show full text]
  • Gelred™& Gelgreen™
    Glowing Products for ScienceTM GelRed™& GelGreen™ www.biotium.com Safe and sensitive nucleic acid gel stains designed to replace the highly toxic ethidium bromide (EtBr). Developed by G scientists at Biotium, GelRed™ and GelGreen™ are superior to EtBr and other SYBR® Safe GelRed™ GelGreen™ EtBr alternatives by having a combination of low toxicity, high sensitivity and exceptional stability. EtBr has been the predominant dye used for nucleic acid gel staining for decades mutagenic chemical. The safety hazard and costs associated with decontamination and waste disposal can ultimately make the dye expensive and inconvenient to use. For this reason, alternative gel stains, such as SYBR® dyes, have become commercially available Figure 2. GelRed™ and GelGreen™ gel stains are safer because they cannot penetrate cell in recent years. While these alternative dyes have reduced mutagenicity membranes to bind DNA in living cells. HeLa cells were incubated at 37oC with 1X SYBR® Safe, sensitivity and stability. For example, SYBR® Safe has very limited sensitivity while GelGreen™ or GelRed™, respectively. Images were taken following incubation with dye for 30 SYBR® Green and SYBR® Gold are much less stable than EtBr. SYBR® dyes also enter SYBR® Safe rapidly entered cells and stained nuclei. GelRed™ and GelGreen™ were unable cells rapidly to stain mitochondria and nuclear DNA, making it more likely for the dyes to be harmful to cells. Indeed, SYBR® Green I has been shown to strongly potentiate DNA was observed in dead cells present sporadically in the cultures, as is observed with other non- mutation caused by UV light and other mutagens (Ohta, et al.
    [Show full text]
  • Molecular Imager ® Gel Doc™ XR+ and Chemidoc™ XRS+ Systems
    IMagING Molecular Imager ® Gel Doc™ XR+ and ChemiDoc™ XRS+ Systems ■■ Reproducible results Imaging Fluorescently Stained DNA with Alternatives to ™ ■■ Safe■ DNA imaging Ethidium Bromide Using the XcitaBlue Conversion Screen ■■ Flexible and easy to use platform ■■ Extra resolution Introduction EtBr Ex. EtBr Em. SYBR ® Safe Ex. SYBR ® Safe Em. and quality images Ethidium bromide (EtBr) is the most commonly ■■ Trusted name used fluorophore for staining DNA due to its availability and low cost. However, it is a powerful mutagen and requires special waste disposal procedures. Furthermore, EtBr is optimally excited by UV light (Figure 1), which is known to damage DNA via thymine dimer formation and strand breaks. This in turn leads to decreased efficiency in cloning and transformation (Paabo et al. 1990, 250 300 350 400 450 500 550 600 650 700 750 800 Grundemann and Schomig 1996). Therefore, it is desirable to develop the use of nonnoxious and GelGreen Ex. GelGreen Em. environmentally friendly technologies. The recently developed GelGreen (Biotium, Inc.) and SYBR® Safe (Invitrogen Corp.) stains exhibit low mutagenicity and no toxicity as reported by their manufacturers (refer to safety information on manufacturer’s Web sites). These stains absorb optimally in the blue region of the spectrum (410–510 nm), emit in the green region (see Figure 250 300 350 400 450 500 550 600 650 700 1), and do not require DNA-damaging UV Wavelength, nm excitation. They have sensitivity equal to or greater Fig. 1. Excitation (Ex.) and emission (Em.) spectra of than that of EtBr, although they may require ethidium bromide, and SYBR ® Safe stain (top panel) slightly longer exposure times.
    [Show full text]
  • Viewing and Editing Data Along with Tools for Performing Basic Data Analysis
    Mathur Manisha et al., International Journal of Advance Research, Ideas and Innovations in Technology. ISSN: 2454-132X Impact factor: 4.295 (Volume3, Issue2) Available online at www.ijariit.com A Comparative Docking Analysis of Non-Carcinogenic DNA Staining Dyes to Propose the Best Alternative to Ethidium Bromide Manisha Mathur Parakh Sharma Priyanka Yadav Christy Joseph Dept Of Zoology, Department Of Department Of Dept Of Zoology, Bioinformatics Bioinformatics Bioinformatics Bioinformatics Mumbai University, India Mumbai University, India Mumbai University, India Mumbai University, India [email protected] [email protected] [email protected] [email protected] Abstract: Fluorescent dyes that stain a cell’s DNA are used in live cell imaging as they allow for tracking of cell division, for the visualization and sizing of dsDNA restriction fragments, and for the examination of properties of the isolated DNA molecules. Conventionally, Ethidium bromide (EtBr) is the cationic dye used to visualize DNA after separating the fragments on Agarose Gel Electrophoresis. It is widely used due to the striking fluorescence enhancement it displays upon intercalation into the dsDNA at the minor groove. Although a highly sensitive stain, it is notoriously unsafe, not only is it a very strong mutagen, it may also be a carcinogen or teratogenic. Histopathological changes of Ethidium Bromide treated rats showed little degenerative changes characterized by glomerular and tubulointerstitial injury, nephrosis, synechia, necrotic changes, cirrhosis, and ischemia. Ethidium bromide revealed pronounced degenerative changes in ovarian histoarchitecture. The sequence of atretic changes involved nuclear degeneration, characterized by Chromatolysis, rupture, and dissolution of the nuclear membrane. Granulosa cells associated with degenerating follicle types (bilaminar, Multilaminar and graffian follicle) showed desquamation, cytolysis, and nuclear dissolution.
    [Show full text]
  • Gel Red and Gel Green Citations
    Gel Red and Gel Green Citations Length-Based Encoding of Binary Data in DNA - Langmuir (ACS ... Manual denaturing TBE-Urea PAGE (12.5%, 5 h, 136 V) was stained with GelGreen (Biotium CA, cat. no. 41004) intercalating dye and imaged on a Typhoon 9410 ... pubs.acs.org/doi/abs/10.1021/la703235y - Similar pages by NG Portney - 2008 Mouse Dnmt3a Preferentially Methylates Linker DNA and Is Inhibited ... Set up a citation RSS feed (Opens new window) Citation Feed ...... The DNA bands were stained with Gel Green (Biotium, CA) according to the manufacturer's ... linkinghub.elsevier.com/retrieve/pii/S0022283608002799 - Similar pages by H Takeshima - 2008 - DIYbio:Notebook/Open Gel Box 2.0/Transilluminator - OpenWetWare 19 Feb 2009 ... DNA Dyes To Test. Biotium. GelGreen; GelRed. LabSupplyMall. GR Safe; GR Safe II. Invitrogen. SYBR Green; SYBR Safe ... openwetware.org/wiki/DIYbio:Notebook/Open_Gel_Box_2.0/Transilluminator - 18k - Cached Application of loop-mediated isothermal amplification for ... Set up a citation RSS feed (Opens new window) Citation Feed .... by electrophoresis on a 2.0% agarose gel that was stained with GelRed (Biotium, USA). ... linkinghub.elsevier.com/retrieve/pii/S0167701209000426 - Similar pages by H Gao - 2009 Analytical Biochemistry : Elimination of amplification artifacts ... Set up a citation RSS feed (Opens new window) Citation Feed .... and the double- stranded cDNA was visualized with GelRed (Biotium, VWR, Leuven, Belgium). ... linkinghub.elsevier.com/retrieve/pii/S0003269708004661 - Similar pages by W De Spiegelaere - 2008 Development of a Highly Sensitive and Specific Assay to Detect ... Download to citation manager. Right arrow, reprints & permissions .... pH = 8.3 (TBE) including GelRed stain (Biotium Inc., Hayward, CA).
    [Show full text]
  • Safinya Laboratories
    UCSB Lab-specific Chemical Hygiene Plan Lab-Specific Chemical Hygiene Plan (CHP) General Information & Standard Operating Procedures (SOPs) for the Safinya Laboratories (MRL rooms 1012, 1012B, 1016, 1024, 1032) Chemical Hygiene Officer (CHO): David Vandenberg ([email protected]) KE, Rev. 2/22/18 UCSB Lab-specific Chemical Hygiene Plan This page intentionally left blank 2 KE, Rev. 2/22/18 UCSB Lab-specific Chemical Hygiene Plan Table of Contents Preface ________________________________________________________________9 Introduction ___________________________________________________________10 Twelve Commandments for Lab Safety ____________________________________11 UCSB Laboratory Worker Responsibilities _________________________________12 General Laboratory Information _________________________________________13 Laboratory Supervisor (PI) ___________________________________________________________ 13 Laboratory Locations (Building /Rooms) ________________________________________________ 13 Laboratory Safety Coordinators (Safety Czars) ____________________________________________ 13 Department Information (MRL) __________________________________________14 Department Safety Representative / Hazard Communication Coordinator _______________________ 14 Location of the Department Safety Bulletin Board _________________________________________ 14 Location of MRL Building Emergency Assembly Point (EAP) _______________________________ 14 Emergency Information _________________________________________________15 Emergency procedures ___________________________________________________15
    [Show full text]
  • Ethidium Bromide: Alternatives & Disposal Methods
    Ethidium Bromide: Alternatives & Disposal Methods I. Overview Ethidium bromide and similar fluorescent compounds such as Acridine Orange are normally used to visualize DNA on a gel. It fluoresces under ultraviolet light, especially when bound to double-stranded DNA. Unfortunately, ethidium bromide and its breakdown products are potent mutagens and carcinogens. Because of its mutagenic and carcinogenic properties, drain disposal of higher concentrations of ethidium bromide is not permitted at UIC. Ethidium bromide is available as a powder, a concentrated solution (10 µg/ml or 10 ppm) and as a dilute solution. Researchers may find that the less hazardous alternatives to ethidium bromide are easier and safer to manage. II. Alternatives to Ethidium Bromide GelRed and GelGreen are nucleic acid gel stains from the company Biotium which offer cell membrane impermeability, high sensitivity, instrument compatibility, stability, and compatibility with all downstream manipulations. Concentrations less than 750 mg/L (750 ppm) may be disposed of in the sink if they have been neutralized with sodium bicarbonate first. Biotium, the manufacturer of GelRed and GelGreen produced a safety report and an overview of the dye, which can be viewed here. Visit Biotium’s website to learn more http://www.biotium.com/product/product_info/Newproduct/GelStains.asp SYBR Safe comes from the company Invitrogen and claims that Sybr safe is less mutagenic, non genotoxic and non-hazardous for waste disposal. Full details of this product including a downloadable version of a report, compiled by Molecular Probes, on the mutagenicity and environmental safety of the product, from the test results of two independent organizations, can be accessed at: http://probes.invitrogen.com/products/sybrsafe/.
    [Show full text]
  • UBC's Safer Alternatives to Ethidium Bromide
    Risk Management Services Environmental Services www.riskmanagement.ubc.ca/environment Safer Alternatives to Ethidium Bromide Different types of dyes are used to stain nucleic acids in the preparation and use of electrophoresis gels. The hazard properties of various products, and hence the disposal requirements, are very different. While some products are completely safe or less toxic, others are mutagenic and require special handling and disposal procedures. As new products become available it is important to clarify the hazard properties and disposal requirements of these dyes. [Photo from: http://en.wikipedia.org/wiki/Ethidium_bromide] Non-Mutagenic Dyes SYBR®Safe, GelRed™, GelGreen™, and EvaGreen®. Independent licensed testing laboratories have determined in Ames tests that these dyes are non-mutagenic. Mutagenic Dyes The following dyes have been determined to have mutagenic and/or toxic properties: Ethidium Bromide, Methylene Blue, Crystal Violet, Propidium Iodide, Acridine Orange, SYBR®Green I, SYBR®Green II, SYBR®Gold and GelStar™. All gels containing these dyes, unwanted dye stock solutions, and all contaminated debris must be handled and disposed as hazardous waste. For details refer to the Laboratory Pollution Prevention and Hazardous Waste Management Manual. Learn More (below is a comparison of some commonly used DNA stains): Ethidium Bromide Ethidium bromide (3,8-Diamino-5-ethyl-6- phenylphenanthridinium bromide) is the classic DNA stain. Ethidium bromide (EtBr) is a flat molecule that fits between adjacent base pairs (intercalates) in the DNA double helix. It has UV absorbance maxima at 300 and 360nm, and can also absorb energy from nucleotides excited at 260nm. The absorbed energy is emitted as orange/yellow light at 590nm.
    [Show full text]
  • Gelred Flyer
    Glowing Products for ScienceTM GelRedTM & GelGreenTM Environmentally safe and ultra-sensitive nucleic acid gel stains for replacing EtBr April 6, 2009 GelRed Is Superior to EtBr GelRed EtBr FEATURES Safer than EtBr Shown by Ames test and other tests to be nonmutagenic and noncytotoxic. Easy disposal Passed environmental safety tests for direct disposal down the drain or in regular trash. Ultra-sensitive Much more sensitive than EtBr and SYBR Safe. Extremely stable Available in water, stable at room temperature for long-term storage and microwavable. Figure 1. Comparison of GelRed and ethidium bromide (EtBr) in precast gel staining using 1% agaose gel in TBE buffer. Two-fold serial dilutions of 1 kb Plus DNA Ladder from Invitrogen were loaded onto each gel in 4 lanes in the amounts of 200 ng, 100 ng, 50 ng and 25 ng, respectively, from left to right. Flexible for different procedures Gels were imaged using a 300-nm transilluminator and photographed with an EtBr filter and Polaroid Can be used for either precast or post gel staining 667 black-and-white print films. Simple to use Very simple procedures for precast and post gel stainings. Perfect Compatibility with a Standard UV Transilluminator or a Gel Reader with GelGreen Is Simply Unmatched Visible Light Excitation by SYBR Safe GelRed replaces EtBr with no optical setting change; GelGreen replaces SYBR or GelStar with GelGreen SYBR Safe no optical setting change(See Figure 3 for spectra). GelGreen Excitation Gel Green Emission GelRed Emission GelRed Excitation 200 300 400 500 600 700 Wavelength (nm) Figure 2. Comparison of GelGreen and SYBR Safe in post gel staining using 1% aga- rose gel in TBE buffer.
    [Show full text]
  • Comparison of Nucleic Acid Gel Stains Cell Permeability, Safety, And
    Glowing Products for Science™ www.biotium.com February 1, 2017 Comparison of Nucleic Acid Gel Stains Cell permeability, safety, and sensitivity of ethidium bromide alternatives Mikhail Guzaev, Xue Li, Candice Park, Wai-Yee Leung, and Lori Roberts Biotium, Inc., Fremont, CA Introduction Chemical analysis Nucleic acid gel stains were analyzed by thin layer chromatography (TLC). Dye Ethidium bromide has been used for decades to detect nucleic acids in agarose gels absorbance spectra were measured using a Beckman Coulter DU-800 UV-visible because it is inexpensive, sensitive enough for routine applications, and simple to spectrophotometer. Dye fluorescence emission spectra were measured in the presence use. However, because ethidium bromide has been shown to be mutagenic in the of double stranded DNA using a Hitachi F-4500 fluorescence spectrophotometer. Mass Ames test, it is potentially hazardous to laboratory workers and the environment, and spectrometry (LC-MS) was performed on an Agilent 6130 Quadrupole System. C18 institutions commonly require it to be disposed of as hazardous waste. Because of this, reverse phase HPLC was performed on an Agilent 1100 Series System. DAPI (catalog many users seek to find safer alternatives to ethidium bromide for gel electrophoresis. no. 40011), propidium iodide (catalog no. 40016), and acridine orange (catalog no. Biotium developed red fluorescent GelRed™ and green fluorescent GelGreen™ as 40039) from Biotium were used as reference dyes. Acridine orange from Sigma-Aldrich safer replacements for ethidium bromide. GelRed™ and GelGreen™ are non-toxic and (catalog no. 235474) also was used for reference. non-mutagenic because they do not bind DNA in living cells due to their membrane impermeability.
    [Show full text]
  • Chemidoc™ MP Imaging System
    Western Blotting ChemiDoc™ MP Imaging System Fluorescence and chemiluminescence detection without compromises Imagine No Compromises • Unmatched fluorescence and chemiluminescence performance • Ultra-intense StarBright™ Secondary Antibodies • Proprietary stain-free technology • Total protein normalization • Powerful and intuitive software MORE THAN TRADITIONALNO WESTERN COMPROMISES BLOTTING One instrument. Many options. Why compromise when a single imaging system can do it all? Traditional 10 sec 200 sec OR Film Fluorescence Scanner ChemiDoc MP System The superior quantitation of digital meets the sensitivity of film and delivers the best fluorescence performance with the brightest new fluorophore. 10 sec 200 sec 20 sec AND AND Chemiluminescence IR800 Fluorescence StarBrightTM Blue 700 Fluorophore More flexibility in dye selection. Detect up to three proteins in a single experiment with a wide range of supported fluorophore options. Bio-Rad ChemiDoc MP DyLight 488 DyLight 650 DyLight 800 Fluorescence Scanner Alexa Fluor 488 Alexa Fluor 647 Alexa Fluor 790 Cy2 Cy5 Cy7 SYPRO Ruby IRDye 800 DyLight 550 StarBright Near Alexa Fluor 546 DyLight 680 Blue Green Red Far Red Infrared Cy3 Alexa Fluor 680 Rhodamine Cy5.5 400 Wavelength, nm 900 IRDye 680 Not your traditional software. Image Lab™ Touch Software: • Teaches as you tap and explore • Picks optimal light source and filters • Suggests exposure times A BETTER WAY TO WESTERN BLOT One blot. Three results. Why strip and reprobe, potentially losing some of your protein and biasing results? Or face the data presentation challenges of cut blots? The ChemiDoc MP System now allows you to visualize three proteins on a single blot. Target A (StarBright Blue 700) Target B (Cy3) Target C (DyLight 800) Triplex immunodetection blot of three unique target proteins.
    [Show full text]
  • Gelred™& Gelgreen™
    GelRed™ & GelGreen™ Safe and sensitive nucleic acid gel stains elRed™ and GelGreen™ are next-generation fluorescent nucleic acid gel stains designed to replace the highly toxic ethidium bromide (EtBr). Developed by G scientists at Biotium, GelRed™ and GelGreen™ are superior to EtBr and other SYBR® Safe GelRed™ GelGreen™ EtBr alternatives by having a combination of low toxicity, high sensitivity and exceptional stability. EtBr has been the predominant dye used for nucleic acid gel staining for decades because of its low price and generally sufficient sensitivity. However, EtBr is a highly mutagenic chemical. The safety hazard and costs associated with decontamination and waste disposal can ultimately make the dye expensive and inconvenient to use. For this reason, alternative gel stains, such as SYBR® dyes, have become commercially available Figure 2. GelRed™ and GelGreen™ gel stains are safer because they cannot penetrate cell in recent years. While these alternative dyes have reduced mutagenicity, they sacrifice membranes to bind DNA in living cells. HeLa cells were incubated at 37oC with 1X SYBR® Safe, sensitivity and stability. For example, SYBR® Safe has very limited sensitivity while GelGreen™ or GelRed™, respectively. Images were taken following incubation with dye for 30 SYBR® Green and SYBR® Gold are much less stable than EtBr. SYBR® dyes also enter min using FITC filter set for SYBR® Safe and GelGreen™, and Cy®3 filter set for GelRed™. SYBR® Safe rapidly entered cells and stained nuclei. GelRed™ and GelGreen™ were unable cells rapidly to stain mitochondria and nuclear DNA, making it more likely for the dyes to to cross cell membranes, demonstrated by the absence of fluorescence staining.
    [Show full text]