DOCSLIB.ORG

2018 General Competition Rules

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
2018 General Competition Rules 2018 General Competition Rules Copyright © Midwestern Council of Sports Car Clubs 2018, all rights reserved Revision B, March 12, 2018 Criteria for submitting CHANGE requests to the Midwestern Council Board of Directors for changes to the current General Competition Rules: 1. Print the CURRENT page that you wish to have changed. 2. Using a RED pen. Strike through that text you wish to eliminate. 3. Clearly write out on a separate sheet of paper the verbiage you wish to have replaced in the RED Strike through areas. Criteria for submitting ADDITION requests to the Midwestern Council Board of Directors for consideration to the current General Competition Rules. 1. Print the Current page that you would like to have the ADDITION located. 2. Identify with a RED pen the area that you believe is the best for your addition 3. On a separate sheet of paper, clearly write out your proposal making sure to identify the reason for the addition. 4. Please identify each new point with the correct numbering system as used within that specific area where you wish the addition to be located. MCSCC 2018 Competition Schedule April 28-29 Blackhawk Farms LSCC/SCSCC Drivers School/W2W May 26-28 Blackhawk Farms SCCR W2W/W2W/Enduro/HSAX June 15-17 Blackhawk Farms VSCDA / MCSCC Staffing June 23-24 Milwaukee Mile GLSCC HSAX/Enduro/W2W July 6-8 Blackhawk Farms GLSCC HPDE, MCSCC DS/HSAX/W2W July 28-29 Gingerman Raceway MSCC W2W/Enduro/W2W August 18-19 Autobahn Country Club NSSCC HSAX//W2W September 29-30 Road America MCSCC W2W/Enduro/W2W/HPDE October 20-21 Blackhawk Farms CSCC W2W - Loooong Race 48 2018 GCR Change Log Updated for 2018 GCR Rev. B: Updated Competition Regulation 1.9 and HSAX General Regulation 1.12 IT weight correction and car addition Updated Enduro series regulations for 2018 Updated schedule and logo Updated HSAX street tire rules, added street AWD Updated for 2018 GCR Rev. A: Updated paddock entry rule (Competition Regulations 8.1, 9.11) Updated licensing section (Competition Regulations 3.8, 3.9) Added HSAX Z class and additional car classings Remove VWS class (all cars eligible for other classes, typically IT or Prod) Remove SS (Showroom Stock) class (all cars eligible for IT classes) SM updates Versus 2017 GCR Rev. A: Updated minor waiver section 3.2.2.2.2 Added HSAX car classifications Versus 2016 GCR Rev. A: Minor Participation program extended to 14 and 15 year olds Several IT class/weight changes, disabled power steering allowed, sunroof clarifications Formula 440 and Formula 500 revised & combined to become newly named F5 class Several Autocross classification additions & changes Autocross Super Street class now allows intercooler changes The Midwestern Council Story ........................................................................................................................................................... 1 Bylaws .............................................................................................................................................................................................. 1 General Regulations .......................................................................................................................... 8 Race Staff Personnel......................................................................................................................................................................... 8 1 Officials and Their Duties ..................................................................................................................................................... 8 2 Stewards Qualifications ...................................................................................................................................................... 10 3 Flagging and Communications ........................................................................................................................................... 11 Competition Regulations.................................................................................................................................................................. 12 1. General Standards ............................................................................................................................................................. 12 2. General Regulations .......................................................................................................................................................... 13 3. Licenses ............................................................................................................................................................................ 14 4. Protests ............................................................................................................................................................................. 19 5. Penalties............................................................................................................................................................................ 20 6. Championship Points System............................................................................................................................................. 22 7. Race Starting Standards .................................................................................................................................................... 22 8. Rules of the Pits................................................................................................................................................................. 23 9. Rules of the Road .............................................................................................................................................................. 23 Safety Equipment ............................................................................................................................................................................ 25 1. Helmets ............................................................................................................................................................................. 25 2. Eye and Face Protection .................................................................................................................................................... 25 3. Balaclavas ......................................................................................................................................................................... 25 4. Equipment Condition .......................................................................................................................................................... 25 5. Gloves ............................................................................................................................................................................... 25 6. Hair Protection ................................................................................................................................................................... 25 7. Cloth Face Shields ............................................................................................................................................................. 25 8. Drivers Suit ........................................................................................................................................................................ 25 9. Driver Restraint Equipment ................................................................................................................................................ 25 Automobiles – General Regulations ................................................................................................................................................. 27 1. Eligibility ............................................................................................................................................................................ 27 2. Fuel ................................................................................................................................................................................... 27 3. Identification Marks ............................................................................................................................................................ 27 4. Advertisements on Automobiles ......................................................................................................................................... 27 5. Mechanical Conditions of Automobiles ............................................................................................................................... 27 6. Weight and Track ............................................................................................................................................................... 27 7. Technical and Safety Inspection ......................................................................................................................................... 27 8. Suitability for Competition................................................................................................................................................... 28 9. Annual Inspection .............................................................................................................................................................. 28 10. Classification of Non-Standard Vehicles ............................................................................................................................
Load more

Recommended publications
  • September-October 2020
    news & features September-October 2020 Special Event Barrett-Jackson Online Only July auction results ............5 With the live auction calendar disrupted by quarantine, Barrett- Jackson promptly moved their efforts online—with great results. New Vehicle Introduction 2021 Ford Bronco 2-Door / 4-Door / Bronco Sport............10 “One of the most highly anticipated” may be overused, but it’s undeniably appropriate for this one, requested by customers for years, feeding the rumor mill for years, and finally here. A Week With 2020 Buick Encore GX Essence FWD ................................15 New Vehicle Introductions 2020/2021 Dodge//SRT 700+ hp performance lineup ........16 Dodge has the vehicles. SRT has the power and tech. And they’ve just come up with three significant new combinations of the two. ARIZONA BOATER MAGAZINE Lamborghini 63: Supercar of the Seas...............................19 New Vehicle Introduction 2021 Ram 1500 TRX ............................................................20 Not to be outdone in red hot battles for supremacy in off-roading, nor in power and performance, Ram reveals a new over-the-top pickup that sets the bar at new highs for all of the above. Special Events Monterey / Pebble Beach 2020: updates/auctions A ....24 New Vehicle Introduction 2021 Kia K5..........................................................................27 Gone is the hot-selling Kia Optima. Here to replace it is the Kia K5. Road Trip 2020 Acura TLX PMC Edition: 3000-mile pizza run B.....28 With a new Acura special edition in hand,
    [Show full text]
  • LOTUS ELAN Manufacturers: Lotus Cars Ltd., Norwich, Norfolk
    S11pplemet11 to "Motnr Trader," 4 October /967 Mo1:or Trader SERVICE DATA No. 464 LOTUS ELAN Manufacturers: Lotus Cars Ltd., Norwich, Norfolk All rights reserved. This Service Data Sheet is compiled by the technical staff of Motor Trader, from information made available by the vehicle manufacturers and from our own experience. It Is the copyright of this journal, and may not be reproduced, in whole or in part, without per• mission. While care is taken to ensure accuracy we do not accept responsibility for errors or omissions. ITH this article in the Service Data sheet series, we depart W from our usual style of presentation. In order to give the DISTINGUISHING FEATURES: The Elan model is readily identifiable from its distinctive styling and maximum information possible with­ from the front by the concealed headlamps which are featured on this model in the available space, opportunity has been taken to devote the accom­ panying four-page Service Supple­ dealt with in this article, while the Lotus car, as certain engine similar­ contained within the axle casing. ment exclusively to the Lotus routine operations involved in ser­ ities exist. Transmission of the drive Drive to the rear road wheels is engine. Other mechanical compo­ vicing the unit, i.e. decarbonisation is taken through a single dry plate transmitted through short universally nents, together with routine service and description of processes involved diaphragm spring clutch to a four­ jointed drive shafts bolted up at their operations are detailed with this are dealt with in the Service Sup­ speed all-sym.:hrumesh gearbox. In inner ends to splined truncated eight-page article.
    [Show full text]
  • Bent Suspension Components
    DIAGNOSING AND REPAIRING BENT SUSPENSION Issue 12/2017 COMPONENTS SHOCK ABSORBER, SUSPENSION, BRAKES, TOWBARS AND WHEEL ALIGNMENT SPECIALISTS Diagnosing Bent Steering and We do this by making use of alignment angles to effectively divide the suspension into two halves. Suspension Components Using The alignment figures will tell us in which half of the Steering Geometry Angles suspension the fault will be found. Camber is one of the most commonly adjusted alignment The alignment angles we use to do this are Camber, geometry angles and 95% of all faults are corrected by S.A.I. (Steering Axis Inclination) and I.A. ( Included Angle). normal alignment methods. However in the other 5% S.A .I., also known as King Pin Inclination (K.P.I.), is the of cases, location of damaged components can prove angle between the true vertical and a line drawn through difficult and time consuming. More importantly, incorrect the centre of the strut’s top pivot (or upper ball joint) diagnosis and repair of the camber faults may lead to and the lower ball joint. It is sometimes difficult to obtain far more serious ramifications. This issue of Tech Stop, an OE specification on S.A.I. and so we recommend shows how alignment angles can be used to indicate keeping a record of SAI angles to obtain an average where the damaged component is, what to replace and figure which becomes your specification for a particular how to achieve correct alignment geometry angles. vehicle. There are a number of potential causes of camber faults I.A is the angle between the S.A.I.
    [Show full text]
  • 2005 Solo Rules
    item # 5665 National Solo Rules 2005 EDITION Sports Car Club of America Solo/Road Rally Department P.O. Box 19400 Topeka, KS 66619-0400 (800) 770-2055 (785) 232-7228 Fax www.scca.com Copyright 2005 by the SportsCar Club of America. All rights reserved. Except as permitted under the United States Copyright Act of 1976, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without the prior written permission of the publisher. Thirty-fifth printing, January 2005 Published by Sports Car Club of America, Inc. P.O. Box 19400. Topeka, KS 66619-0400 Printed in the United States of America Copies may be ordered from SCCA Properties P.O. Box 19400 Topeka, KS 66619-0400 (800) 770-2055 Printer (text and cover): Mainline Printing, Inc. 818 S.E. Adams Topeka, KS 66607-1126 (785) 233-2338 Printed in the United States of America. ************************************************************************************************************ This book is the property of: Name ______________________________________________________________________ Address ___________________________________________________________________ City/State/Zip_______________________________________________________________ Region _________________________________________________ Member # _________ FOREWORD Effective January 1, 2005, previous editions of the SCCA Solo Rules are superseded by the following SCCA Solo Rules. The SCCA reserves
    [Show full text]
  • July-August 2016
    news & features July-August 2016 Equipment Driving shoes ........................................................................5 Performance Dodge-SRT-Viper at Bondurant A ....................................10 Buy an SRT, Hellcat or Viper, and you know you’ve arrived. When Dodge sends you to Bondurant, it just gets better. By Joe Sage New Vehicle Introduction 2017 Jaguar F-PACE B ......................................................16 Jaguar enters the SUV realm with its most affordable model ever, aiming to triple sales. By Sue Mead Vehicle Impression 2016 Kia Optima SX Turbo .................................................19 Road Trip Bisbee and Colossal Cave C ............................................20 We discover some new surprises above and below ground in southeastern Arizona. By Tyson Hugie New Vehicle Introduction 2017 Fiat 124 Spider D.......................................................22 Fiat is significantly broadening its North American presence, by taking the perfect sports car and making it better. By Joe Sage Good Deeds Ford dealers “Fill an F-150” with water ............................26 Salvation Army program provides life-sustaining water to those in need, and Ford delivers. By Jennifer Johnson Special Events Auction results, upcoming concours and shows............27 Vehicle Impression 2016 Jeep® Renegade Sport 4x4 ......................................29 Motorsports Red Bull Global Rallycross at Wild Horse Pass E .........30 We join Volkswagen Andretti Rallycross as they defend their GRC trophy starting with this season opener. By Joe Sage Vehicle Impression 2016 Volkswagen Beetle Convertible R-Line SEL ...........35 New Vehicle Introduction 2017 Ford Fusion F............................................................36 Ford’s hot-selling entry in this hottest-selling of segments gains several new advantages for 2017. By Joe Sage ARIZONARIDERMAGAZINE Motorcycle news and highlights ......................................38 AMA Pro Flat Track at Turf Paradise, plus bike and event news.
    [Show full text]
  • P.1 of 9 Note 118 Part 2 PICTURES in PRACTICE 1955 Practice for Crystal Palace Mike Hawthorn Tries Stirling Moss’ Maserati 250F for Size
    P.1 of 9 Note 118 Part 2 PICTURES in PRACTICE 1955 practice for Crystal Palace Mike Hawthorn tries Stirling Moss’ Maserati 250F for size. Alf Francis, holding the seat cushion, is on the left. Tony Robinson, Alf’s assistant is on the right. After Hawthorn was 2nd to Harry Schell in a Vanwall in practice, Francis improved the 250F by dropping the axle ratio and taking a leaf out of the rear spring (DASO 147). Hawthorn then won the race from Schell. This was just after Hawthorn had left Vandervell’s team, dissatisfied with their reliability, and returned to Ferrari for the classic GPs. He and Vandervell had exchanged discourteous gestures as he arrived in the paddock! Colin Chapman showing a masterful elbow at Ramp corner in his Lotus Mk IX with an MG 1½ litre engine. The port fuel injection engine of the 1955 Vanwall. The Bosch pump was driven from the front of the inlet camshaft and the fuel flow was controlled mechanically. The airflow was controlled by otherwise- empty Amal carburetter bodies close to the ports. This system can be contrasted with the unsuccessful SU system on Moss’ Maserati at Easter Goodwood. 1956 Practice for Easter Goodwood The new BRM P25 (IL4 2½ litre naturally- aspirated). This was its 3rd event after a non- start at Aintree and a DNF at Oulton Park in 1955. Hawthorn drove it but after transmission failure in the race which resulted in the car overturning was lucky to escape serious injury. P.2 of 9 The works Maserat 250F of Moss was fitted with port fuel injection by a Bosch pump.
    [Show full text]
  • The Ex-Alan Stacey, Works 1959 Lotus 15 Chassis No. 621-3 Engine No
    ! The Ex-Alan Stacey, Works 1959 Lotus 15 Chassis No. 621-3 Engine No. 1097 • Driven with notable success for Team Lotus by Alan Stacey during the 1959 season. • According to a leading historian to have potentially been taken to Le Mans in 1959 as a spare car or even a second entry. • Sold to New Zealand in 1959 where it continued a well documented and successful racing career on into the 1970’s. • Driven to an impressive 7th in the 1960 New Zealand Grand Prix by Jim Palmer, in the company of Moss, Mclaren and Brabham, all in 2.5-litre Cooper Grand Prix cars. • Re-imported into the UK by respected historic racer and collector Spencer Flack. • Raced with great success by its current owner since 2008, with numerous wins, overall class victory in the Stirling Moss Trophy 2009, 2010 and 2011, 2nd in the Madgwick Cup and a 5th in the Sussex Trophy at the Goodwood Revival and an impressive 2nd overall in the hard fought Plateaux 3 at Peter Auto’s Le Mans Classic. • Meticulously prepared by one of the most respected names in historic racing with no expense spared, having seen little or no miles since its last refresh. • This is an incredibly rare opportunity to acquire such an original and well regarded Ex-Works Lotus and an absolute proven front running ‘50s Sports Car. To many, the 1950s saw sportscar racing at its most pure, establishing and creating some of the most influential car manufacturers for the decades to follow. By the mid to late 1950’s the tides of sports car design were starting to turn and pave the way for things to come.
    [Show full text]
  • Presented by Tire Rack 2019 Solo Rules 2019 SOLO RULES
    On orders over $50 FAST FREE SHIPPING tirerack.com/freeshipping 200 TREADWEAR STREET AND ST-CLASS TIRES Tire Rack Presented by 2019 Solo Rules 2019 SOLO RULES g-Force Rival S Potenza RE-71R Direzza ZIII Azenis RT615K+ PRESENTED BY: g-Force Rival S 1.5 3-rib/4-rib Ventus R-S4 Ecsta V720 N FERA SUR4G Proxes R1R ADVAN Neova AD08R Visit www.tirerack.com throughout the year for the latest tire selection! R-COMPOUND TIRES BFGoodrich g-Force R1 / R1 S Hankook Ventus Z214 C51 Medium Hankook Ventus Z214 C71 So Hoosier A7 / R7 Hoosier D.O.T. Radial Wet H2O Toyo Proxes RR Competition Tire Prep Services Include Tire Shaving & Heat Cycling www.SCCA.com ©2018 Tire Rack 888-380-8473 On orders over $50 FAST FREE SHIPPING tirerack.com/freeshipping 200 TREADWEAR STREET AND ST-CLASS TIRES Tire Rack Presented by 2019 Solo Rules 2019 SOLO RULES g-Force Rival S Potenza RE-71R Direzza ZIII Azenis RT615K+ PRESENTED BY: g-Force Rival S 1.5 3-rib/4-rib Ventus R-S4 Ecsta V720 N FERA SUR4G Proxes R1R ADVAN Neova AD08R Visit www.tirerack.com throughout the year for the latest tire selection! R-COMPOUND TIRES BFGoodrich g-Force R1 / R1 S Hankook Ventus Z214 C51 Medium Hankook Ventus Z214 C71 So Hoosier A7 / R7 Hoosier D.O.T. Radial Wet H2O Toyo Proxes RR Competition Tire Prep Services Include Tire Shaving & Heat Cycling www.SCCA.com ©2018 Tire Rack 888-380-8473 SCCA® National Solo® Rules 2019 EDITION Sports Car Club of America® Solo® Department 6620 SE Dwight St.
    [Show full text]
  • Kinematic and Dynamic Analysis for a New Macpherson Strut Suspension System
    Mechanics and Mechanical Engineering Vol. 22, No. 4 (2018) 1223{1238 c Technical University of Lodz https://doi.org/10.2478/mme-2018-0094 Kinematic and Dynamic Analysis for a New MacPherson Strut Suspension System S. Dehbari, J. Marzbanrad Vehicle Dynamical Systems Research Laboratory, School of Automotive Engineering Iran University of Science and Technology, Tehran, Iran e-mail: [email protected]; [email protected] Received (21 November 2017) Revised (11 March 2018) Accepted (10 September 2018) The present paper undertakes kinematic and dynamic analysis of front suspension sys- tem. The investigated model is a full-scale Macpherson which is a multibody system. Two degree of freedom model is considered here to illustrate the vertical displacement of sprung mass and unsprung mass with using displacement matrix. Ride and handling parameters including displacement of sprung and unsprung masses, camber/caster an- gle, and track changes are derived from the relationships. Moreover, geometrical model and equations are validated by Adams/Car software. The kinematic and dynamic re- sults have been compared in both analytical and numerical outputs for verification. The proposed analytical model shows less than 5% differences with a complicated multibody model. Keywords: suspension system, MacPherson, multibody system, ride, camber, caster. 1. Introduction Suspension system is composed of a set of links connecting wheels to the car body. The main duties of the suspension system are isolated car body from road input and keeping wheels on appropriate position. Without suspension system, car body moves drastically and parts of the car will shortly fail due to the shocks imposed by road.
    [Show full text]
  • Kinematic and Dynamic Analysis for a New Macpherson Strut Suspension System
    Mechanics and Mechanical Engineering Vol. 22, No. 4 (2018) 1223{1238 c Technical University of Lodz Kinematic and Dynamic Analysis for a New MacPherson Strut Suspension System S. Dehbari, J. Marzbanrad Vehicle Dynamical Systems Research Laboratory, School of Automotive Engineering Iran University of Science and Technology, Tehran, Iran e-mail: [email protected]; [email protected] Received (21 November 2017) Revised (11 March 2018) Accepted (10 September 2018) The present paper undertakes kinematic and dynamic analysis of front suspension sys- tem. The investigated model is a full-scale Macpherson which is a multibody system. Two degree of freedom model is considered here to illustrate the vertical displacement of sprung mass and unsprung mass with using displacement matrix. Ride and handling parameters including displacement of sprung and unsprung masses, camber/caster an- gle, and track changes are derived from the relationships. Moreover, geometrical model and equations are validated by Adams/Car software. The kinematic and dynamic re- sults have been compared in both analytical and numerical outputs for verification. The proposed analytical model shows less than 5% differences with a complicated multibody model. Keywords: suspension system, MacPherson, multibody system, ride, camber, caster. 1. Introduction Suspension system is composed of a set of links connecting wheels to the car body. The main duties of the suspension system are isolated car body from road input and keeping wheels on appropriate position. Without suspension system, car body moves drastically and parts of the car will shortly fail due to the shocks imposed by road. Suspension system effects on ride and vertical response.
    [Show full text]
  • Roll Center and Roll Axis
    SUSPENSION SYSTEM Suspension - set of elements connecting wheel axles with vehicles’ body • A vehicle suspension is required to perform effectively under a range of operating conditions including high levels of braking and accelerating, cornering at speed and traversing rough terrain – manoeuvres which are required to be done in comfort and with safety. • Suspension system connects vehicles body with wheel and its tire and allow vertical movement of the wheel in relation to body. • The wheels, through the suspension linkage, must propel, steer, and stop the vehicle, and support the associated forces. Suspension system 1. To provide good ride and handling performance – this requires the suspension to have vertical compliance providing chassis isolation and ensuring that the wheels follow the road profile with very little tire load fluctuation; 2. To ensure that steering control is maintained during maneuvering – this requires the wheels to be maintained in the proper positional attitude with respect to the road surface; 3. To ensure that the vehicle responds favorably to control forces produced by the tires as a result of longitudinal braking and accelerating forces, lateral cornering forces and braking and accelerating torques – this requires the suspension geometry to be designed to resist squat, dive and roll of the vehicle body; 4. To provide isolation from high frequency vibration arising from tire excitation – this requires appropriate isolation in the suspension joints to prevent the transmission of ‘road noise’ to the vehicle body. Types of suspension system • Each spatial body with six degrees of freedom can be constrained with suitable elements – like rod links – to reduce the number of DoF • A suspension system should provide one degree of freedom for the wheel.
    [Show full text]
  • Chassis & Suspension
    Applications – Chassis & Suspension Introduction The chassis is considered to be one of the significant structures of an automobile. It is the frame which holds both the car body and the power train. Various mechanical parts like the engine and the drive train, the axle assemblies including the wheels, the suspension parts, the brakes, the steering components, etc., are bolted onto the chassis. The chassis provides the strength needed for supporting the different vehicular components as well as the payload and helps to keep the automobile rigid and stiff. Consequently, the chassis is also an important component of the overall safety system. Furthermore, it ensures low levels of noise, vibrations and harshness throughout the automobile. Suspension is the term given to the system of springs, shock absorbers and linkages that connects the vehicle to its wheels. The suspension system serves a dual purpose. It contributes to the car's road performance, the braking characteristics for good active safety and the driving pleasure. It also keeps the vehicle occupants comfortable and reasonably well isolated from road noise, bumps, and vibrations. Chassis design concepts Originally, automobile designs used the body-on-frame construction where a load-bearing chassis consisting of a ladder frame, the powertrain, and the suspension formed the base vehicle which then supported a non-load-bearing body. In the beginning used on almost all vehicles, the ladder frame has been gradually phased out on passenger cars around the 1940s in favor of perimeter frames. In the second half of the last century, the frame chassis design was more and more displaced by monocoque constructions, integrating the body and chassis into a single unit.
    [Show full text]