Qualitative Filter Papers

Total Page：16

File Type：pdf, Size：1020Kb

Qualitative Filter Papers Our qualitative filter papers are recommended for use in general • Qualitative Analysis analytical methods which determine or identify particular constitutes • Made from refined pulp of a mixture regardless of the amount present. Qualitative filter papers are often used in routine separation work that still requires high purity and linters > 95% alpha and consistent performance with an average ash content of 0.06% cellulose content • Low Ash Content of Depending on the Wet Strength, loading capacity, filtration speed 0.06% and particle retention, Johnson Test Papers Ltd offers a comprehensive • Untreated range of low Ash Filter Papers for general laboratory work. Even without acid treatment, the extremely pure filter paper grades are • Consistent Performance made of cellulose fibres with an α-content of nearly 100% according • Custom Cut to precise norms. • Bulk Packaging Our paper can be supplied as rolls, sheets or discs and covers all requirements for qualitative analysis no matter what the filtration task may be. Standard Qualitative Filter Papers Standard Qualitative Filter Papers are used for low gravity, or even quadrant-folded application. Standard Filter Papers have a higher level of α- cellulose than other filter papers, this means that it will weaken when the paper has become introduced to water. We do not recommend Standard Filter Papers if wet handling or vacuum work is necessary. In routine quadrant-folded applications the underline strength of standard (untreated) grades does not present an issue. Grade Whatman Speed Thickness Pore Size Weight (g/m²) Filtration Burst Strength Equivalent (mm) (μM) Speed (sec) (kg/cm²) 301 = No.5 Very Slow Filtering 0.14 2-3 84 180 > 0.30 302 = No.3 Medium Filtering 0.3 12-16 150 65 3.90 303 = No.2 Medium Filtering 0.16 5-8 87 50 > 0.10 304 = No.1 Medium Filtering 0.16 5-13 73 88 1.95 305 = No.4 Fast Filtering 0.20 12-15 84 10 > 0.30.

Copy Link

Recommended publications

Zinc and Cadmium in Paper (Reaffirmation of T 438 Cm-96)
WI 050114.01 T 438 DRAFT NO. 5 DATE July 27, 2006 TAPPI WORKING GROUP CHAIRMAN J Ishley SUBJECT CATEGORY Fillers & Pigments Testing RELATED METHODS See “Additional Information” CAUTION: This Test Method may include safety precautions which are believed to be appropriate at the time of publication of the method. The intent of these is to alert the user of the method to safety issues related to such use. The user is responsible for determining that the safety precautions are complete and are appropriate to their use of the method, and for ensuring that suitable safety practices have not changed since publication of the method. This method may require the use, disposal, or both, of chemicals which may present serious health hazards to humans. Procedures for the handling of such substances are set forth on Material Safety Data Sheets which must be developed by all manufacturers and importers of potentially hazardous chemicals and maintained by all distributors of potentially hazardous chemicals. Prior to the use of this method, the user must determine whether any of the chemicals to be used or disposed of are potentially hazardous and, if so, must follow strictly the procedures specified by both the manufacturer, as well as local, state, and federal authorities for safe use and disposal of these chemicals. Zinc and cadmium in paper (Reaffirmation of T 438 cm-96) (no changes were made since last draft) 1. Scope and significance 1.1 This method maybe used for the determination of cadmium and zinc either in paper or in highly opaque pigments. Zinc is usually present in zinc oxide, zinc sulfide, or as lithopone (a combination of zinc sulfide and barium sulfate), which is occasionally used in filled paper, in paper coatings and in high-pressure laminates and wallpaper.
[Show full text]
Detection of Acid-Producing Bacteria Nachweis Von Säureproduzierenden Bakterien Détection De Bactéries Produisant Des Acides
(19) TZZ ¥ _T (11) EP 2 443 249 B1 (12) EUROPEAN PATENT SPECIFICATION (45) Date of publication and mention (51) Int Cl.: of the grant of the patent: C12Q 1/04 (2006.01) G01N 33/84 (2006.01) 19.11.2014 Bulletin 2014/47 (86) International application number: (21) Application number: 10790013.6 PCT/US2010/038569 (22) Date of filing: 15.06.2010 (87) International publication number: WO 2010/147918 (23.12.2010 Gazette 2010/51) (54) DETECTION OF ACID-PRODUCING BACTERIA NACHWEIS VON SÄUREPRODUZIERENDEN BAKTERIEN DÉTECTION DE BACTÉRIES PRODUISANT DES ACIDES (84) Designated Contracting States: (74) Representative: Isarpatent AL AT BE BG CH CY CZ DE DK EE ES FI FR GB Patent- und Rechtsanwälte GR HR HU IE IS IT LI LT LU LV MC MK MT NL NO Friedrichstrasse 31 PL PT RO SE SI SK SM TR 80801 München (DE) (30) Priority: 15.06.2009 US 187107 P (56) References cited: 15.03.2010 US 314140 P US-A- 4 528 269 US-A- 5 098 832 US-A- 5 164 301 US-A- 5 601 998 (43) Date of publication of application: US-A- 5 601 998 US-A- 5 786 167 25.04.2012 Bulletin 2012/17 US-B2- 6 756 225 US-B2- 7 150 977 (73) Proprietor: 3M Innovative Properties Company • DARUKARADHYA J ET AL: "Selective Saint Paul, MN 55133-3427 (US) enumeration of Lactobacillus acidophilus, Bifidobacterium spp., starter lactic acid bacteria (72) Inventors: and non-starter lactic acid bacteria from Cheddar • YOUNG, Robert, F. cheese", INTERNATIONAL DAIRY JOURNAL, Saint Paul, Minnesota 55133-3427 (US) ELSEVIER APPLIED SCIENCE, BARKING, GB, • MACH, Patrick, A.
[Show full text]
Photograpmc MATERIALS CONSERVATION CATALOG
PHOTOGRAPmC MATERIALS CONSERVATION CATALOG The American Institute for Conservation of Historic and Artistic Works Photographic Materials Group FIRST EDmON November 1994 INPAINTING OUTLINE The Pbotographlc MaterIals CODServatioD Catalog is a publication of the Photographic Materials Group of the American Institute for CODBervation of Historic and Artistic Works. The Photographic MaterIals CoDServatioD Catalog is published as a convemence for the members of the Photographic Materials Group. Publication in DO way endorses or recommends any of the treatments, methods, or techniques described herein. First Edition copyright 1994. The Photographic Materials Group of the American Institute for CODBervation of Historic and Artistic Works. Inpa........ 0utIIDe. Copies of outline chapters of the Pbotograpble MaterIals CoaservatloD Catalog may be purchased from the American Institute for CODBervation of Historic and Artistic Works, 1717 K Street, NW., Suite 301, Washington, DC 20006 for $15.00 each edition (members, $17.50 non-members), plus postage. PHOTOGRAPIDC MATERIALS CONSERVATION CATALOG STATEMENT OF PURPOSE The purpose of the Photograpbic Materials Conservation Catalog is to compile a catalog of coDSe1'Vation treatment procedures and information pertinent to the preservation and exhibition of photographic materials. Although the catalog will inventory techniques used by photographic conservators through the process of compiling outlines, the catalog is not intended to establish definitive procedures nor to provide step-by-step recipes for the untrained. Inclusion of information in the catalog does not constitute an endorsement or approval of the procedure described. The catalog is written by conservators for CODSe1'Vators, as an aid to decision making. Individual conservators are solely responsible for determining the safety, adequacy, and appropriateness of a treatment for a given project and must understand the possible effects of the treatment on the photographic material treated.
[Show full text]
A Re-Evaluation of the Filter Paper Method of Measuring
A RE-EVALUATION OF THE FILTER PAPER METHOD OF MEASURING SOIL SUCTION by RIFAT BULUT, B.S.C.E. A THESIS IN CIVIL ENGINEERING Submitted to the Graduate Faculty of Texas Tech University in Partial Fulfillment of the Requirements for the Degree of MASTER OF SCIENCE IN CIVIL ENGINEERING Approved August, 1996 Eos I ^^^ ACKNOWLEDGMENTS UhO 1^ would like to express my sincere and deep appreciation to Dr. Warren Kent Wra> for his guidance, endless encouragement, and assistance throughout the course of this study. I also wish to thank Dr. Priyantha W. Jayawickrama for his kindK consentmg to serve on my thesis committee. 1 would sincerely like to thank Mr. Hsiu-Chung Lee for his wholehearted cooperation during performing of the experiments and guidance. My sincere appreciation to Mr. Brad Thomhill, Mario Torres, and Drex Little for their help in providing equipment for the experiments. Finally, 1 wish to thank my family and friends for their support and encouragement throughout the whole study period. n TABLE OF CONTENTS ACKNOWLEDGMENTS ii ABSTRACT v LIST OF TABLES vi LIST OF FIGURES vii CHAPTER L INTRODUCTION 1 1.1 Problem Statement 1 1.2 Statement of Objectives 4 1.3 Research Approach 6 11. SEARCH OF THE TECHNICAL LITERATURE 7 2.1 Soil Suction Concept 7 2.2 The Filter Paper Method 14 2.2.1 Historical Background ofthe Filter Paper Calibration 15 2.2.2 Working Principle ofthe Filter Paper Method 22 2.2.2.1 Principle of Total Suction Measurements 23 2.2.2.2 Principle of Matric Suction Measurements 25 2.2.3 Calibration Technique of Filter Paper 26 2.2.3.1 Total Suction Calibration 26 2.2.3.2 Matric Suction Calibration 29 2.2.4 Performance of Filter Paper Method 33 m.
[Show full text]
Laboratory Equipment Reference Sheet
Laboratory Equipment Stirring Rod: Reference Sheet: Iron Ring: Description: Glass rod. Uses: To stir combinations; To use in pouring liquids. Evaporating Dish: Description: Iron ring with a screw fastener; Several Sizes Uses: To fasten to the ring stand as a support for an apparatus Description: Porcelain dish. Buret Clamp/Test Tube Clamp: Uses: As a container for small amounts of liquids being evaporated. Glass Plate: Description: Metal clamp with a screw fastener, swivel and lock nut, adjusting screw, and a curved clamp. Uses: To hold an apparatus; May be fastened to a ring stand. Mortar and Pestle: Description: Thick glass. Uses: Many uses; Should not be heated Description: Heavy porcelain dish with a grinder. Watch Glass: Uses: To grind chemicals to a powder. Spatula: Description: Curved glass. Uses: May be used as a beaker cover; May be used in evaporating very small amounts of Description: Made of metal or porcelain. liquid. Uses: To transfer solid chemicals in weighing. Funnel: Triangular File: Description: Metal file with three cutting edges. Uses: To scratch glass or file. Rubber Connector: Description: Glass or plastic. Uses: To hold filter paper; May be used in pouring Description: Short length of tubing. Medicine Dropper: Uses: To connect parts of an apparatus. Pinch Clamp: Description: Glass tip with a rubber bulb. Uses: To transfer small amounts of liquid. Forceps: Description: Metal clamp with finger grips. Uses: To clamp a rubber connector. Test Tube Rack: Description: Metal Uses: To pick up or hold small objects. Beaker: Description: Rack; May be wood, metal, or plastic. Uses: To hold test tubes in an upright position.
[Show full text]
Advantec Mfs, Inc
CONTENTS TABLE OF CONTENTS i INTRODUCTION ii HOW TO ORDER iii MEMBRANE FILTERS 1 MICROBIOLOGY SUPPLIES 17 LABORATORY FILTER PAPERS 25 SPECIALTY PRODUCTS 35 TEST PAPERS 41 INDUSTRIAL FILTER PAPERS & PADS 45 CAPSULES AND CARTRIDGES 53 VACUUM FILTRATION 83 PRESSURE FILTRATION 103 APPENDIX/INDEX 125 FILTRATION MEDIA & FILTRATION SYSTEMS CATALOG•Volume15 ADVANTEC MFS, INC. 6723 Sierra Court, Suite A Dublin, California 94568 U.S.A. Phone (800) 334-7132 +1-925-479-0625 Fax +1-925-479-0630 E-mail [email protected] URL http://www.advantecmfs.com TRADEMARK ADVANTEC is trademark/registered trademark in Japan and other countries of Toyo Roshi Kaisha, Ltd. and its group companies. TABLE OF CONTENTS MEMBRANE FILTERS pH Test Paper-Strips . .43 VACUUM FILTRATION Introduction . .2 Litmus Paper-Booklets . .44 Introduction . .84 Properties of Membrane Filters . .3 Ion Test Papers . .44 Glass Microfiltration: Support Systems . .85 Mixed Cellulose Esters (MCE) . .4 Chlorine Test Papers . .44 13 mm Glass Microanalysis Holders . .86 Cellulose Acetate . .7 25 mm Glass Microanalysis Holders . .87 Hydrophobic PTFE . .8 INDUSTRIAL FILTER PAPERS & PADS 47 mm Glass Microanalysis Holders . .88 Hydrophobic PTFE with Standard Filter Papers . .46 47 mm Glass Microanalysis Holders Polypropylene Net Support . .9 Fine Particle Filter Papers . .46 – With All-PTFE Seal . .89 Hydrophilic PTFE . .10 Creped Filter Papers . .46 47 mm Glass Sterility Test Unit . .90 Coated Cellulose Acetate . .11 Wet Strength Filter Papers . .47 90 mm Glass Microanalysis Holders . .91 Nylon . .12 High Purity Filter Papers . .48 Filter Flasks and Stoppers . .92 Polycarbonate . .13 High Viscosity Fluid Filter Papers . .48 All-Glass Filtration Assemblies . .93 Prefilters for Membrane Filters .
[Show full text]
X-4805-1 48.05
48.05 48.05 - Other uncoated paper and paperboard, in rolls or sheets, not further worked or processed than as specified in note 3 to this chapter (+). - Fluting paper : 4805.11 - - Semi-chemical fluting paper 4805.12 - - Straw fluting paper 4805.19 - - Other - Testliner (recycled liner board) : 4805.24 - - Weighing 150 g/m² or less 4805.25 - - Weighing more than 150 g/m² 4805.30 - Sulphite wrapping paper 4805.40 - Filter paper and paperboard 4805.50 - Felt paper and paperboard - Other : 4805.91 - - Weighing 150 g/m² or less 4805.92 - - Weighing more than 150 g/m² but less than 225 g/m² 4805.93 - - Weighing 225 g/m² or more This heading covers machine-made uncoated papers and paperboards as manufactured in the form of rolls or sheets (for dimensions, see Note 8 to this Chapter), other than those included in headings 48.01 to 48.04. It excludes, however, certain special papers and paperboards or special products (headings 48.06 to 48.08 and headings 48.12 to 48.16) and paper and paperboard which have been subjected to processes other than those permitted in Note 3, for example, coated or impregnated paper or paperboard (headings 48.09 to 48.11). Examples of paper and paperboard of this heading are : (1) Semi-chemical fluting paper as defined in subheading Note 3 to this Chapter. (2) Multi-ply paper and paperboard which are products obtained by pressing together two or more layers of moist pulps of which at least one has characteristics different from the others. These differences may arise from the nature of the pulps used (e.g., recycled waste), the method of production (e.g., mechanical or chemical) or, if the pulps are of the same nature and have been produced by the same method, the degree of processing (e.g., unbleached, bleached or coloured).
[Show full text]
Laboratory Supplies and Equipment
Laboratory Supplies and Equipment Beakers: 9 - 12 • Beakers with Handles • Printed Square Ratio Beakers • Griffin Style Molded Beakers • Tapered PP, PMP & PTFE Beakers • Heatable PTFE Beakers Bottles: 17 - 32 • Plastic Laboratory Bottles • Rectangular & Square Bottles Heatable PTFE Beakers Page 12 • Tamper Evident Plastic Bottles • Concertina Collapsible Bottle • Plastic Dispensing Bottles NEW Straight-Side Containers • Plastic Wash Bottles PETE with White PP Closures • PTFE Bottle Pourers Page 39 Containers: 38 - 42 • Screw Cap Plastic Jars & Containers • Snap Cap Plastic Jars & Containers • Hinged Lid Plastic Containers • Dispensing Plastic Containers • Graduated Plastic Containers • Disposable Plastic Containers Cylinders: 45 - 48 • Clear Plastic Cylinder, PMP • Translucent Plastic Cylinder, PP • Short Form Plastic Cylinder, PP • Four Liter Plastic Cylinder, PP NEW Polycarbonate Graduated Bottles with PP Closures Page 21 • Certified Plastic Cylinder, PMP • Hydrometer Jar, PP • Conical Shape Plastic Cylinder, PP Disposal Boxes: 54 - 55 • Bio-bin Waste Disposal Containers • Glass Disposal Boxes • Burn-upTM Bins • Plastic Recycling Boxes • Non-Hazardous Disposal Boxes Printed Cylinders Page 47 Drying Racks: 55 - 56 • Kartell Plastic Drying Rack, High Impact PS • Dynalon Mega-Peg Plastic Drying Rack • Azlon Epoxy Coated Drying Rack • Plastic Draining Baskets • Custom Size Drying Racks Available Burn-upTM Bins Page 54 Dynalon® Labware Table of Contents and Introduction ® Dynalon Labware, a leading wholesaler of plastic lab supplies throughout
[Show full text]
Manual on Laboratory Testing of Fishery Products
ISSN: 1995-4875 CRFM Special Publication. No.14 Manual on Laboratory Testing of Fishery Products The SPS Project is funded by the European Union under the 10th Economic Development Fund and is being implemented by the Inter-American Institute for Cooperation on Agriculture (IICA) with the following regional Partners: the CARICOM Secretariat, the Caribbean Regional Fisheries Mechanism (CRFM), El Comité Nacional para la Aplicació n de Medidas Sanitarias y Fitosanitarias de la Repú blica Dominicana (CNMSF) and CARIFORUM. Manual on Laboratory Testing of Fisheries Products Copyright © 2016 by Caribbean Regional Fisheries Mechanism (CRFM) All rights reserved. Reproduction, dissemination and use of material in this publication for educational or non- commercial purposes are authorized without prior written permission of the CRFM, provided the source is fully acknowledged. No part of this publication may be reproduced, disseminated or used for any commercial purposes or resold without the prior written permission of the CRFM. Prepared by: Christine Froese, Megapesca Lda., December 2016, under contract to the Inter- American Institute for Cooperation on Agriculture (IICA), through the 10th EDF funded Sanitary and Phytosanitary Project Correct Citation: Froese, C, 2016. Manual on Laboratory Testing of Fishery Products. CRFM Special Publication. No.14. 89pp. ISSN: 1995-4875 ISBN: 978-976-8257-38-3 Cover Photo: Fishery Product Testing Laboratory, Saint Vincent Contents 1 INTRODUCTION ...............................................................................................................................
[Show full text]
Funnels and Filters
Funnels And Filters table-top Buchner A B Funnels Filter Large Volumes Quickly Polyethylene funnels with your choice of Fritware® or Perforated filter plate. Removable 1 hose barbed connector accepts 12.7mm ( ⁄2") 3 I.D. tube and threads into ⁄4" NPT bung on the funnel. A. Fritware® Porous Filter Plates FIXED or REMOVABLE porous filter plate supported by a multiple ring grid. Filter plates are made of high density polyethylene, 1 6.4mm ( ⁄4") thick, with a non-porous ring at the periphery of the plate which seals filter paper when used. Available in two porosities (medium and coarse). Medium porosity plate is 45-90 microns; coarse porosity plate is 90-130 Custom sizes available upon request. microns. Use below 52ºC (125ºF). B. Perforated Filter Plates 3 Available with a FIXED or REMOVABLE perforated filter plate made of 4.8mm ( ⁄16") thick high 3 7 density polyethylene (HDPE) with 4.8mm ( ⁄16") perforations on 11mm ( ⁄16") centers. The FIXED version is for coarse filtration or use with a cloth or paper filter. A REMOVABLE filter plate is available for use in precious metals recovery. Use below 52ºC (125ºF). Large diameter 24" and 36" sizes (next page) are crated for shipment. Buchner table-top Funnels 10.25” (26cm) Funnel Inside Diameter 8" (20.3Cm) Overall HeIgHt, 5” (12.7Cm ) rIm tO Plate CatalOg nO. I.D. DesCrIPtIOn H14620-0000 10.25" Funnel with Coarse Porosity Fixed Plate (A) H14620-1260 10.25" Funnel with Coarse Porosity Removable Plate (A) H14625-3510 10.25" Funnel with Medium Porosity Fixed Plate (A) H14626-3510 10.25" Funnel with Medium Porosity Removable Plate (A) H14627-0000 10.25" Funnel with Perforated Fixed Plate (B) H14627-1260 10.25" Funnel with Perforated Removable Plate (B) 18" (45.7cm) Funnel Inside Diameter 11.5" (29.2Cm) Overall HeIgHt, 8" (20.3Cm) rIm tO Plate CatalOg nO.
[Show full text]
F1y3x CHAPTER 48 PAPER and PAPERBOARD
)&f1y3X CHAPTER 48 PAPER AND PAPERBOARD; ARTICLES OF PAPER PULP, OF PAPER OR OF PAPERBOARD X 48-l Notes 1. This chapter does not cover: (a) Articles of chapter 30; (b) Stamping foils of heading 3212; (c) Perfumed papers or papers impregnated or coated with cosmetics (chapter 33); (d) Paper or cellulose wadding impregnated, coated or covered with soap or detergent (heading 3401), or with polishes, creams or similar preparations (heading 3405); (e) Sensitized paper or paperboard of headings 370l to 3704; (f) Paper impregnated with diagnostic or laboratory reagents (heading 3822); (g) Paper-reinforced stratified sheeting of plastics, or one layer of paper or paperboard coated or covered with a layer of plastics, the latter constituting more than half the total thickness, or articles of such materials, other than wallcoverings of heading 48l4 (chapter 39); (h) Articles of heading 4202 (for example, travel goods); (ij) Articles of chapter 46 (manufactures of plaiting material); (k) Paper yarn or textile articles of paper yarn (section XI); (l) Articles of chapter 64 or chapter 65; (m) Abrasive paper or paperboard (heading 6805) or paper- or paperboard-backed mica (heading 6814) (paper and paperboard coated with mica powder are, however, to be classified in this chapter); (n) Metal foil backed with paper or paperboard (section XV); (o) Articles of heading 9209; or (p) Articles of chapter 95 (for example, toys, games, sports equipment) or chapter 96 (for example, buttons). 2. Subject to the provisions of note 6, headings 480l to 4805 include paper and paperboard which have been subjected to calendering, super-calendering, glazing or similar finishing, false water-marking or surface sizing, and also paper, paperboard, cellulose wadding and webs of cellulose fibers, colored or marbled throughout the mass by any method.
[Show full text]
Chapter 48 Paper and Paperboard; Articles of Paper Pulp, of Paper Or Of
Section X Chapter 48 Chapter 48 Paper and paperboard; articles of paper pulp, of paper or of paperboard Notes. 1.- For the purposes of this Chapter, except where the context otherwise requires, a reference to “paper” includes references to paperboard (irrespective of thickness or weight per m2). 2.- This Chapter does not cover: (a) Articles of Chapter 30; (b) Stamping foils of heading 32.12; I Perfumed papers or papers impregnated or coated with cosmetics (Chapter 33); (d) Paper or cellulose wadding impregnated, coated or covered with soap or detergent (heading 34.01), or with polishes, creams or similar preparations (heading 34.05); (e) Sensitised paper or paperboard of headings 37.01 to 37.04; (f) Paper impregnated with diagnostic or laboratory reagents (heading 38.22); (g) Paper-reinforced stratified sheeting of plastics, or one layer of paper or paperboard coated or covered with a layer of plastics, the latter constituting more than half the total thickness, or articles of such materials, other than wall coverings of heading 48.14 (Chapter 39); (h) Articles of heading 42.02 (for example, travel goods); (ij) Articles of Chapter 46 (manufactures of plaiting material); (k) Paper yarn or textile articles of paper yarn (Section XI); (l) Articles of Chapter 64 or Chapter 65; (m) Abrasive paper or paperboard (heading 68.05) or paper- or paperboard-backed mica (heading 68.14) (paper and paperboard coated with mica powder are, however, to be classified in this Chapter); (n) Metal foil backed with paper or paperboard (generally Section XIV or XV); (o) Articles of heading 92.09; or (p) Articles of Chapter 95 (for example, toys, games, sports requisites) or Chapter 96 (for example, buttons).
[Show full text]