DOCSLIB.ORG

Universal Smart Clip-On Sensors for Energy Meters

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Universal Smart Clip-On Sensors for Energy Meters Smart Smart Product Building Home Electricity Meter Gas Electricity chooser Digital Disk Meter Meter FM200 -> Optical Interface Product Range BelSenso Optimized FM230e FM230m FM210em Customizable FM250e FM250m FM250g* FM300 -> Data Logger FM300e FM300m FM300g* FM400 -> M2M FM400e FM400m FM400g** Energy Tracker FM-ENO: Integrated ENOCEAN module FM-WMB : Integrated wM-Bus module * ATEX sensor ** ATEX sensor with external GPRS module to be positioned in non-ATEX area About Fludia Fludia is a leading energy efficiency expert that develops and markets universal smart and self powered sensors to easily collect, measure and understand the consumption data provided by electricity and gas meters. With more than 5 000 electricity meter case studies and 4 000 load curve data analytics, Fludia is recognized as an international expert with a high value track record. The company participates in several R&D programs and collaborative projects supported by governmental organizations such as ADEME (the French Environmental and Energy-Efficiency Agency) and Bpifrance (the French public investment bank). AMR If you are involved in projects related to AMR, smart building, Universal Smart smart grid, energy audit or energy monitoring, Fludia will answer your demand for innovative smart sensors that easily interact with your own existing solutions. Clip-on Sensors for For more information, visit our web site www.fludia.com Energy meters or contact our sales department : [email protected] SmartBuilding (IoT) Simplicity, Precision, Innovation 65, rue Jean-Jacques Rousseau – 92150 Suresnes - France Téléphone : + 33 (0)1 83 64 13 90 - www.fludia.com Data Analytics MEDIUM SIZED BUILDINGS Company buildings BelSenso Shopping centers Discover a comprehensive range of universal clip-on, Gymnasiums, user-friendly and self-powered smart sensors that easily recreative areas measure and collect the electricity and gas consumption Business centers data provided by all meters. Health centers Schools Universal solutions: compatible with all electricity and gas meter models (conventional electricity disk rotating meters, diaphragm gas meters, digital models and smart meters) Plug & Play sensors: easy clip-on installation & set-up technology (less than 15 mn) SMALL Self-powered solutions: up to 5-year battery life (optional 10-year battery) BUILDINGS Ready for data analytics: ideal for load curve analysis, load management, Bank agencies energy audits, energy and power monitoring Shops Customized data: format (csv, json), frequency (1, 10, 15 minutes) Retail chains Hotels, motels... Restaurants The most cost effective Meter Reading solutions for Small & Medium Sized Buildings SIMPLICITY, Ideal for AMR Optimized for Dedicated to (Automatic Meter Reading) SMARTBUILDING (IoT) ENERGY AUDIT PRECISION, INNOVATION FM200 Series FM400 Series FM300 Series HIGH ACCURACY Optical Interface M2M Energy Tracker 1-click energy data logger Instantaneous detection of LED flash • Energy pulse generator • Instantly transforms any existing meter into a • Includes data recorder as well as Instantaneous detection Smart meter (fully integrated GPRS module) set-up and data transfer software of Disk Rotation • Compatible with: Optimized OCR algorithm - standard wireless modules • High-precision & customized data capture: • Bluetooth or USB data transfer (enocean, Lora, Sigfox, Veolia/Endetec, 1mn, 10 mn, 15 mn... every 24 or 48 hours wM-Bus...) data collection • «FMWIN» PC data display software CUSTOMIZATION - building automation systems • 30-day data storage Pulse length (Schneider, Siemens, Trend, Tridium, Power optimization Wago, WIT..) • Data transfer through FTP or API HIGH VALUE TRACK RECORD Partnership with key energy suppliers and energy efficiency integrators More than 5 000 meter readers installed and 4 000 load curve data analytics performed.
Load more

Recommended publications
  • White Paper KNX for Metering, Displaying and Energy Management
    White Paper KNX for Metering, Displaying and Energy Management KNX for metering, displaying and energy management 1 Introduction By means of the mandate M441 as issued in 2009, the European Commission has given the Europe‐ an Standardisation Organisations (ESOs) the task to come forward with standards for interoperable smart meters. The above mandate was issued in the light of soaring energy prices shortly before the financial crisis of 2008 and the climate change debate. As a consequence, initiatives are taken to: - Increase the use of renewable energies (solar, wind, mini block heat and generating plants …) up to the level of the individual consumer (thus becoming “prosumer”). Re‐ newable energy have however the drawback of being unpredictable energy sources; - Decrease the dependency on fossil fuels by enabling the switch over to hybrid or elec‐ tric cars; The above requires a more intelligent control of the electricity grid and the interaction between the grid operator/energy producer and the prosumer, in order to avoid demand peaks and surplus pro‐ duction by: - managing loads, up to the level of individual homes; - use storage capacity at the prosumer (e.g. his electrical car) to store surplus energy (during low demand) or to recuperate energy (during high demand). In order to do so, the smart meter - will introduce more complex tariff structures to encourage or discourage energy con‐ sumption, in order to promote the use of green energy; - should keep the inhabitant of home and building informed on his energy consumption to decrease or remedy excessive energy consumption; As a result of the mandate and by the installed Smart Metering Coordination Group between the ESOs, CENELEC TC205 has been appointed as the group responsible for definition of appropriate in‐ terfaces between the future smart meter and the smart home.
    [Show full text]
  • Smart Buildings: Using Smart Technology to Save Energy in Existing Buildings
    Smart Buildings: Using Smart Technology to Save Energy in Existing Buildings Jennifer King and Christopher Perry February 2017 Report A1701 © American Council for an Energy-Efficient Economy 529 14th Street NW, Suite 600, Washington, DC 20045 Phone: (202) 507-4000 • Twitter: @ACEEEDC Facebook.com/myACEEE • aceee.org SMART BUILDINGS © ACEEE Contents About the Authors ..............................................................................................................................iii Acknowledgments ..............................................................................................................................iii Executive Summary ........................................................................................................................... iv Introduction .......................................................................................................................................... 1 Methodology and Scope of This Study ............................................................................................ 1 Smart Building Technologies ............................................................................................................. 3 HVAC Systems ......................................................................................................................... 4 Plug Loads ................................................................................................................................. 9 Lighting ..................................................................................................................................
    [Show full text]
  • Strategies for Power Line Communications Smart Metering Network Deployment
    Energies 2014, 7, 2377-2420; doi:10.3390/en7042377 OPEN ACCESS energies ISSN 1996-1073 www.mdpi.com/journal/energies Review Strategies for Power Line Communications Smart Metering Network Deployment Alberto Sendin 1,*, Ivan Peña 2 and Pablo Angueira 2 1 Division of Control Systems and Telecommunications, Iberdrola, Av. San Adrian 48, 48003 Bilbao, Spain 2 Department of Communication Engineering, Bilbao Faculty of Engineering, University of the Basque Country (UPV/EHU), Alda. Urkijo S/N, 48013 Bilbao, Spain; E-Mails: [email protected] (I.P.); [email protected] (P.A.) * Author to whom correspondence should be addressed; E-Mail: [email protected]; Tel.: +34-94-4664787; Fax: +34-94-4664485. Received: 7 February 2014; in revised form: 21 March 2014 / Accepted: 24 March 2014 / Published: 15 April 2014 Abstract: Smart Grids are becoming a reality all over the world. Nowadays, the research efforts for the introduction and deployment of these grids are mainly focused on the development of the field of Smart Metering. This emerging application requires the use of technologies to access the significant number of points of supply (PoS) existing in the grid, covering the Low Voltage (LV) segment with the lowest possible costs. Power Line Communications (PLC) have been extensively used in electricity grids for a variety of purposes and, of late, have been the focus of renewed interest. PLC are really well suited for quick and inexpensive pervasive deployments. However, no LV grid is the same in any electricity company (utility), and the particularities of each grid evolution, architecture, circumstances and materials, makes it a challenge to deploy Smart Metering networks with PLC technologies, with the Smart Grid as an ultimate goal.
    [Show full text]
  • KNX Metering 24-2-2012 Englisch.Indd
    KNXKNX Smart Smart MeteringMetering Divisionalsparten- andund herstellerübergreifendcross-vendor From the simple meter... ... to FacilityWeb, for improved cost control and transparency In addition to the consumption data for The advantages billing purposes, Smart Metering options • Low power consumption of only to control the energy consumption and 150 mW per bus coupler reduce targeted. This is based on the glo- • Low-cost bus coupler bal standard KNX with its integrated and • functions almost like „big“ web server unifi ed communications over the TCP / IP • Low start-up costs, since all functions protocol into the KNX bus. ready FacilityWeb makes every KNX bus • Little planning effort participants and a web-enabled the de- • Each bus device has its own website tection, mapping, switching and control, • No additional software required for the and the permanent control of energy con- end userh sumption. One solution for everything KNX Lingg & Janke FacilityWeb offers a savings-and vendor-independent system for the detection of the consumption data. The different consumption of electricity, gas, water and heat meters are trans- mitted via HTTP and FTP services. Data transfer can be effected as desired over UMTS, GPRS, GSM, ISDN, LAN, WLAN, PLC, or KOAX. Read data simply Applications The meter data is easily readable • Actual value display by the network coupler web histo- • Storing meter data ry. In the setup menu of the visua- • Long-time recording, for example lization application needs to do is to of Temperature gradients input the appropriate values: the IP • data processing, for example on address of the NK-FW followed by Mircosoft Excel ® the physical address of the counter • Display and read the data and the stored password - finished.
    [Show full text]
  • KATALOG 1/2016 Building Automation. Simple. Smart
    KATALOG 1/2016 KNX Smart Metering / KNX Switches / KNX Standard Products janke.de - www.lingg Building automation. simple. smart. New products KNX eco+ KNX quick electronic manual operation Smart Metering The eco+ product range by Lingg & Janke is convincing through From now on most of the smart metering products are equipped its outstanding price-performance ratio. eco+ offers a wide range of with the new KNX quick technology. Thus, for the operator KNX standard products like switching actuators, blind / shutter commissioning of electricity, gas, heat and water meters becomes actuators and binary inputs. as easy as never before. The advantages and the high quality of Lingg & Janke prod- Each meter obtains a group number (1...F) and a channel num- ucts remain unchanged. For example the switching actuators ber (1...9). This results in a maximum amount of usable meters are still ideally suited for switching capacitive loads with high of 135. If you set all the coding switches of a quick device to 0, switching currents (C-load) and the relays of the blind / shut- you may program the device via the ETS, as with all other KNX ter actuators are plunged, so they can be exchanged in case components. In quick mode all meters are sending their meter of malfunction. readings, and, depending on the type of the meter, in- stantaneous values like power, flow rate or temperature. Meter The latest version of the switching and shutter actuators now readings are transmitted to the KNX bus every 5 minutes, include an electronic manual operation feature for easier com- instantaneous values are sent cyclically every 15 to 30 seconds.
    [Show full text]
  • Multiple Interface Management in Smart Grid Networks François Lemercier
    Multiple interface management in smart grid networks François Lemercier To cite this version: François Lemercier. Multiple interface management in smart grid networks. Networking and Internet Architecture [cs.NI]. Ecole nationale supérieure Mines-Télécom Atlantique, 2018. English. NNT : 2018IMTA0100. tel-02095994 HAL Id: tel-02095994 https://tel.archives-ouvertes.fr/tel-02095994 Submitted on 11 Apr 2019 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. IMT Atlantique Bretagne-Pays de la Loire Ecole´ Mines-Tel´ ecom´ THESE` DE DOCTORAT DE L’ E´ COLE NATIONALE SUPERIEURE MINES-TELECOM ATLANTIQUE BRETAGNE PAYS DE LA LOIRE - IMT ATLANTIQUE COMUE UNIVERSITE BRETAGNE LOIRE Ecole Doctorale N°601 Mathematique` et Sciences et Technologies de l’Information et de la Communication (MathSTIC) Specialit´ e´ : Informatique Par Franc¸ois LEMERCIER Multiple Interface Management in Smart Grid Networks Gestion d’interface multiple dans les reseaux´ smart grids. These` present´ ee´ et soutenue a` RENNES , le 20/11/2018 Unite´ de recherche : Institut de recherche en informatique
    [Show full text]
  • Smart Meter – What We Know Measurement Challenges and Complexities
    Smart Meter – What We Know Measurement Challenges and Complexities A Technical Paper to Clarify RF Radiation Emissions and Measurement Methodologies December 2011 Published by Peter H. Sierck, PrinciPal/Industrial Hygienist 1106 Second Street, Suite 102 Encinitas, CA 92024 EMF & RF Solutions is a division of Environmental Testing & Technology, Inc (ET&T) 1106 Second Street, Suite 102 ▲ Encinitas, CA 92024 ▲ Tel: &60‐804‐9400 ▲ www.EMFRF.com Table of Contents Background Information ............................................................................................................................... 3 Reference Literature ..................................................................................................................................... 3 What Are Smart Meters? .............................................................................................................................. 4 Why the Concern? ........................................................................................................................................ 5 Health Concerns ........................................................................................................................................ 5 Environmental Concern ............................................................................................................................ 5 Privacy and Billing ..................................................................................................................................... 5 What TyPe of Radiation?
    [Show full text]
  • High Accuracy Modbus Energy Meter Features
    pMon® PM-3133P DIN Rail Modbus Power Meter High Accuracy Modbus Energy Meter Features High accuracy power meter pMon® PM-3133P is an advanced smart meter designed to measure and calibrated to achieve 0.5% accuracy report True RMS measurement data for power quality, energy consumption or better. and demand analysis.The PM-3000 series meters can be applied to both True RMS measurements, including the low voltage primary side and/or medium/high voltage secondary side, kW, kVAr, kVA, Power Factor and THD. operating over a wide range of input voltages from 10 to 500 VAC at 50 or 60Hz. In addition to monitoring, there are two relay output channels Modbus RTU/TCP support and options controlled via Modbus protocol for load control, demand management or for RS-485 Serial communication or exception notification. Ethernet to suit individual needs. Utilising its low profile form factor, PM-3000 series energy meter can be Safe extra-low voltage, split core installed neatly into existing distribution board or wiring panel. Multiple current transformer for safe and easy PM-3000 series meters can be connected and managed by pMon® PMC-5151 installation. Intelligent Gateway using daisy chain scheme for device management, data Dual relay switch for equipment logging, web-based reporting and high level application integration with control and demand management. pMon® Dashboard, DCIM or SCADA/BMS. pMon Dashboard Application Electrical Room CRAC Units PM-3133 PM-3133 PM-3133 DCIM Server Room/ Data Hall PMC-5151 Operation/Control Room SCADA/BMS PM-3133 PM-3133
    [Show full text]
  • OPTIMIZE YOUR ENERGY MANAGEMENT with Smart, Precise Electrical Metering
    Buildings THE POWER OF CONNECTED OPTIMIZE YOUR ENERGY MANAGEMENT With Smart, Precise Electrical Metering Submeter Technical Resource Guide 2 Submeter Technical Catalog Sophisticated Energy Profiling Whether you’re a facility manager for a business, a property manager for office or residential properties, or a contractor who services such properties, Honeywell electrical metering provides precise usage data and analytical insights well beyond what the master utility meter provides. From hardware and software to service and intuitive system that shows exactly where, support, Honeywell leads the industry in when, and how the facility is using energy. solutions for sophisticated energy profiling. Honeywell E-Mon electric submeters are Our E-Mon™ metering solutions are designed installed on the facility side of the master for fast installation, easy use, precise utility meter to provide a range of monitoring monitoring, and scalable versatility in a wide capabilities such as: variety of applications and properties. • Electrical-usage analysis and identification In conjunction with automatic meter reading of peak demand levels for load comparisons. (AMR) software, Honeywell electrical metering • Time-of-use metering of electricity, gas, provides accurate and timely snapshots of a water, steam, BTUs, and other energy facility’s energy use, with reporting capabilities sources. that readily scale from a single circuit or device • Fair and equitable cost allocation for tenant to an entire building, campus, and beyond. billing. This submeter-based AMR approach provides • Measurement, verification, and the essential platform to efficiently optimize benchmarking of kW / kWh for energy and energy management. All utility service data for green-building initiatives. a facility – including electric, water, gas, steam, • Net metering.
    [Show full text]
  • 1. Eastron Sdm630modbus Smart Meter Modbus Protocol
    1. Eastron SDM630Modbus Smart Meter Modbus Protocol Implementation V1.7 1.1 Modbus Protocol Overview This section provides basic information for interfacing the Eastron Smart meter to a Modbus Protocol network. If background information or more details of the Eastron implementation is required please refer to section 2 and 3 of this document. Eastron offers the option of an RS485 communication facility for direct connection to SCADA or other communications systems using the Modbus Protocol RTU salve protocol. The Modbus Protocol establishes the format for the master’s query by placing into it the device address, a function code defining the requested action, any data to be sent, and an error checking field. The slave’s response message is also constructed using Modbus Protocol. It contains fields confirming the action taken, any data to be returned, and an error-checking field. If an error occurs in receipt of the message, SDM630Modbus will make no response. If the SDM630Modbus is unable to perform the requested action, it will construct an error message and send it as the response. The electrical interface is 2-wire RS485, via 2 screw terminals. Connection should be made using twisted pair screened cable (Typically 22 gauge Belden 8761 or equivalent). All "A" and "B" connections are daisy chained together. Line topology may or may not require terminating loads depending on the type and length of cable used. Loop (ring) topology does not require any termination load. The impedance of the termination load should match the impedance of the cable and be at both ends of the line.
    [Show full text]
  • Artificial Intelligence and the Future for Smart Homes by Ommid Saberi and Rebecca Menes
    www.ifc.org/thoughtleadership NOTE 78 • FEB 2020 Artificial Intelligence and the Future for Smart Homes By Ommid Saberi and Rebecca Menes The floor area of the buildings we occupy is expected to double by 2060, with most of this growth occurring in residential construction. And population growth and urbanization in emerging markets will mean expanding cities and rising demand for new housing in urban areas around the world.1 These trends represent an enormous opportunity to design, build, and operate the homes of tomorrow in intelligent ways that minimize energy consumption and carbon emissions, lower building and homeowner costs, and raise home values. Artificial intelligence will play a pivotal role in this effort by using data—including grid data, smart meter data, weather data, and energy use information—to study and improve building performance, optimize resource consumption, and increase comfort and cost efficiency for residents. AI will also analyze data collected from multiple buildings to improve building design and construction and inform future policy making related to construction and urban planning. Homes waste energy and water when they aren’t designed While the concept is still in its infancy, an AI-based well. This is a particular challenge in emerging markets, framework could collect data from smart meters in an where resources are less plentiful and utility costs are anonymous way and then interpret and share it for better high relative to incomes. Even in homes that are designed decision-making by multiple stakeholders, from residents with efficiency in mind, energy and water use can increase and builders to utilities and governments.
    [Show full text]
  • CLASS 3400 Smart Meter Energy Monitoring Products & Systems Advanced Kwh/Demand Meters with Communication Features
    ® CLASS 3400 Smart Meter Energy Monitoring Products & Systems Advanced kWh/Demand Meters with Communication Features Standard features Include advanced 4-line large display showing: - kWh - kW demand (with peak date & time) - Power factor per phase - Real-time load in kW - Amps per Phase - Volts per phase On-board set-up option for: - IP address - Meter date/time - Load Control Settings - ID codes for EZ7, Modbus and BACnet Optional expanded feature package provides additional features: Dim. 8" H x 6" W x 3 3/4" D - Load control option for load control/shedding - Two external meter inputs (water, gas, BTU, etc.) Model Numbers (stored in channels 5 & 6) - Two Pulse outputs (one kWh and one kVARh) 120/208-240V, 220/380V, 230/400V, 127/220V, 3-Phase 240/415V, 3-Phase 0-2 volt output split-core current sensors allow for enhanced E34-208100-R01KIT (100 amp) safety and accurate remote mounting of sensors up to 500 feet E34-400100-R01KIT (100 amp) E34-208200-R01KIT (200 amp) E34-400200-R01KIT (200 amp) from meter without power interruption. (Optional solid-core E34-208400-R01KIT (400 amp) E34-400400-R01KIT (400 amp) sensors available.) E34-208800-R01KIT (800 amp) E34-400800-R01KIT (800 amp) E34-2081600R01KIT (1600 amp) E34-4001600R01KIT (1600 amp) Onboard installation diagnostics and verification system. E34-2083200R01KIT (3200 amp) E34-4003200R01KIT (3200 amp) Built-in RS-485 communications capability supports the following 277/480V, 3-Phase connection configurations (or combinations not to exceed 52 E34-480100-R01KIT (100 amp) devices per channel): E34-480200-R01KIT (200 amp) - Up to 52 Din-Mon D2 & D5, Class 3200, 3400 or 5000 E34-480400-R01KIT (400 amp) meters and/or IDR interval data recorders E34-480800-R01KIT (800 amp) Cabling is daisy-chain configuration,3-conductor, 18-22 AWG, E34-4801600R01KIT (1600 amp) up to 4,000 cable feet total per channel.
    [Show full text]