Truck Accessories - Tonneau Covers

TRUCK ACCESSORIES - TONNEAU COVERS

167

TRUCK ACCESSORIES - TONNEAU COVERS

Easily Complete Your Pickup • No drilling required--installs easily! • Protect your truck's cargo. • Padded aluminum frame clamps on--no metal to metal contact! • Improve gas mileage--cover pays for itself. • Elegance & Simplicity • Aluminum corner pieces for fast and easy removal of front and rear rails. • Sliding snaps on framework guarantee simple cover attachment. • Cover and cross members easily removed for hauling large items. • Limited Lifetime Warranty Limited Lifetime warranty covers defects in materials and workmanship on Vinyl Cover and Rails

The Tekstyle Profile snapless roll-up cover offers the ultimate combination of features! Profile Tonneau Features: • Smooth snapless design, low profile bows • Mounts to top of pick-up bed for improved water runoff and minimal bed space intrusion • Does not interfere with other accessories such as bed extenders, chest-type tool boxes, and over-the-rail bed liners. • Quick, simple installation. Cover, bows, and front rail pre-assembled at the factory • Hook and loop fasteners integrated into aluminum rails • Sewn fitted corners and durable rubber seals front and rear eliminate moisture, wind, dirt penetration • Rear tensioning levers lock cover securely in place • Simple to use Bungee straps secure cover when stowed and won't rattle against truck body • Limited Lifetime Warranty

Tekstyle Premium Snap-On Tonneau • Trigger-Lock Bows feature a spring loaded latch mechanism that allow them to install and remove with one hand • Installs in 7 minutes! Upper clamps are pre-measured and installed at the factory • Unique Santoprene tailgate seal keeps water out and is channeled into the aluminum rear rail so it stays put • High tech silver frame, stainless steel snaps • "Smart Snaps" stay in place on the frame • Cover allows access at front corners • "No drilling required" installation! • Front and rear rails snap solidly into place, gently tap to remove for hauling large loads! • Hook and loop straps secure cover when stowed • Available in Standard Black and *Cream White, Sand, Slate, Bright White, Medium Neutral, Red, Indigo Blue, Carbon Fiber, Black Acrylic • Lifetime Warranty. *By special order only Teksport Tonneau Covers

The Revolutionary "QUICK HATCH" Tonneau Cover! Quickhatch Features: • Unique positive latching system closes in one easy step! • Gas struts support the cover in its upright position. • Hinged portion removes easily for bulk hauling. • Black epoxy-coated frame. • "No drilling required" installation! • Built to LAST --- all metal structural parts.

• Limited Lifetime Warranty against defects in materials and workmanship on Fabric and Rails.

CALL US TODAY FOR YOUR APPLICATION

168 TRUCK ACCESSORIES - TUBE STEPS

Make getting in or out of your truck a breeze while enhancing the look of your vehicle at the same time. Application specific, these CAD engineered tube steps utilize existing holes on 95% of applications. This means we've eliminated frame drilling, welding, and the need to raise the vehicle.

Kits include: • Easy to follow instructions • Brackets • Hardware • Ordinary hand tools are required to install applications. • Molded polymer step pad provides skid resistant traction.

Additional Step Pad Strength Step pad recess is formed into the tube rather than cut for additional strength.

Exacting Fits Our products provide an exact fit for each specific vehicle. Over 100 different applications available!

The Industry's Best Warranty: Lifetime Warranty on Stainless Steel. Stainless steel offers durability and longevity not available in chrome finishes. 5-year Warranty on Black Powdercoat tube steps with exclusive E-coat.

CALL US TODAY FOR YOUR APPLICATION

169 TRUCK ACCESSORIES • AUTO VENTSHADE

ADD FRESH-AIR COMFORT, STYLE & PROTECTION WITH AUTO VENTSHADE PRODUCTS VENTVISOR ® DEFLECTOR

Our most popular Ventshade accessory, the Ventvisor keeps rain out and lets fresh air in, reducing harmful heat buildup and reducing interior damage. They feature a smooth, stylish smoked acrylic design and are custom made for each application for a perfect fit every time. Easy to install with durable 3M adhesive tape, they require no drilling to install and are available for hundreds of cars, trucks and sport utility vehicles, 2 & 4 door models. Now available for extended cab pickups!!

BUGFLECTOR

Add functional protection to your front end with the Bugflector bug and stone deflector. Molded from durable Plex DRTM, the bugflector installs easily with OEM approved 3M tape and/or screws for a perfect custom fit. And, the smooth contoured shape adds an aerodynamic appearance that flows smoothly with the lines of your vehicle for a clean factory look. Available for most popular truck and SUV applications including a 3-piece design for the new Dodge Ram and Dodge Dakota pickups. BUGFLECTOR - ORIGINAL STYLE BUGFLECTOR II - WRAP-AROUND STYLE

SUNFLECTOR ® REAR WINDOW SUN DEFLECTOR

Shade the rear of your pickup cab from the glaring sun with this unique rear window sun deflector from Auto Ventshade Company! The stylish smoked acrylic design blends with the cab contour for a truly custom look, and it fits with or without sliding rear windows. The Sunflector installs in minutes with no tools using OEM approved 3M adhesive tape and is available for many popular pickup applications.

WINDFLECTOR ® SUNROOF DEFLECTOR

Eliminate wind noise, buffeting and enjoy fresh air comfort even in the rain with the Windflector! Custom molded for a perfect fit from dark smoked acrylic, the Windflector installs in seconds with OEM approved 3M adhesive tape. No tools and no drilling required! Available for power or pop-out style sunroofs.

170 TAILLIGHT COVERS

TAILLIGHT COVERS

BOW TIE TAILLIGHT COVERS

2403 24582

BIG HORN SERIES

27703 27193 27403

SPORTSMAN SERIES PATRIOT SERIES

27501 27502 2831

Ask about additional taillight covers.

171 TOWING MIRRORS CUSTOM TOWING MIRRORS CIPA’S CUSTOM TOWING CIPA-USA’S new Universal Towing Mirror extends your vision further than any OEM mirror. With a fully adjustable mir- MIRRORS SLIDE OVER ror, adjustable feet, securing clamps, and tightening knob, this YOUR VEHICLE’S EXISTING mirror gives you the extended vision you need, without any MIRROR TO GIVE YOU annoying vibration! WIth its aerodynamic and durable styling, CIPA # 11960 ADDED TOWING VISION. and no tools required to install this is the perfect mirror for Universal Towing Mirror beginning and experienced towers everywhere CUSTOM TOWING FIT CHART Part Number Application & Fits Years CHEVY 1000 GMC/Chevy Pick-Ups & Vans 1980-1995 Dodge Pick-Ups & Vans 1986-1995 Fits Chrome Manual Mirrors Only 86-93 Fits both electric & manual chrome mirrors Will not fit the chrome mirrors with black trim 1994095 fits chrome manual mirrors only

10200 Pair Many GMC/Chevy full size vehicles 1996-1998 GMC/Chevy full Size pick-Ups 1996-1998 10201 Left Suburban/Yukon/Kodiak/Dually 1992-1999 Chevy Blazer 1992-1993 10202 Right Safari /Astro Vans 1991-1999 Cadillac Escalade 2000 Fits both electric & manual black fold-away mirrors Fits the long, thin mirror that is not attached to an arm

10400 Pair Chevy Sonoma 1996-1998 10401 Left Chevy S-10 1995-1998 10402 Right Chevy Blazer, Jimmy, Oldsmobile-Bravada 1995-1998 Fits electric & manual black mirrors

10600 Pair Chevy Venture 1997-1999 10601 Left GMC Silhouette 1997-1999 10602 Right Pontiac Transport 1997-1999

10800 Pair GMC/Chevy Full Size Pick-Ups, 10801 Left Silverado & Sierra 1999-2003 10802 Right Yukon / Tahoe/Cadillac Escalade / Suburban / Avalanche 2000-2003 Jimmy / Blazer Fits the full black & chrome-cap models, will not fit the full chrome mirrors CHRYSLER/DODGE/JEEP 10100 Pair Jeep Grand Cherokee, Grand Wagoneer 1993-1995 10101 Left Fits both electric & manual black mirrors 10102 Right Fits the Grand Cherokees only 10300 Dodge Pick-Ups & Vans 1994-1997 1994-1997: fits both electric & manual black mirrors 1996-1997: fits the chrome electric mirrors will not fit the Dodge Dakotas with black sport mirrors

10500 Pair Dodge Ram (2002 - fits 2500 & 3500 only) 1998-2002 10501 Left Dodge Dakota 1998-2000 10502 Right Dodge Durango 1998-2000 Dodge Full Size Van 2000-2002 will not fit 5 x 7-inch sport mirror

10700 Pair Dodge Ram 1500 2002-2003 10701 Left Dodge Ram 2500 & 3500 2003

FORD 11000 Ford Full SIze Pick-Ups & Rangers 1983-1998 Chevy S-10 & GM S-15 1982-1993 Fits the chrome two-point break away style mirrors Fits the s-10/s-15 up to 1993 only Fits Rangers only up to 1991, style changed in 1992

11500 Pair Ford Full Size Pick-Ups 1992-1996 11501 Left Ford Aerostar Van 1990-1996 11502 Right Ford Explorer 1988-1995 Ford Navajo & Bronco Additional adapter (Part # 11504) needed for Explorer Will not fit E-series’ Clubwagon, Econoline, Windstar Vans, or Rangers with black sport mirrors. Also 1997 F-250 & F-350 Heavy Duty with old body style (black mirror with chrome back)

11600 Pair Ford Full Size Pick-Ups Light Duty, Expedition 1997-2002 11601 Left Lincoln Navigator 1998-2002 11602 Right Fits both painted and chrome mirrors

11700 Pair Ford Full Size Pick-Ups F-250, F-350 & Heavy Duty (manual) 1997-1998 11701 Left F-150 XL (manual) 2000-2001 11702 Right 11900 Pair Ford F-250 & F-350 Super Duty 1999-2002 11901 Left Ford F-150 XL 1999-2000 11902 Right Ford Excursion 2000-2002

172 MIRRORS • BED EXTENDERS

BED EXTENDER

The CIPA-USA Truck Bed Extender is available for most current full-sized and mini pickup trucks. It can be used to extend a full-size bed for extra-long loads, to secure corners increase load capacity dramatically. Because of the way it attaches, you never need to load cargo by lifting it up over the top of the Extender! • Installs easily in 3 minutes with NO DRILLING! • Fabricated from tubular steel • Great Looking, does the job with style • Powder-coated for durability and visual appeal • Square corners dramatically increase load capacity • Weighs less than 40 lbs. • Enables you to fit even standard size 2 x 4’s • Uses tailgate mechanism to hold secure • Strong enough to attach anchor straps • Quick release for easy removal • Fit most current pickups and bed lengths • Swings down to create easy loading and unloading • Works even with bedliners • Will fit behind rear seats when unassembled

Model Years Description Part # Chevy/GMC 1500 1989-2003 Full-size Trucks w/Styleside 6-1/2’ or 8’ bed 05700 1500 1989-2003 Full-size Trucks w/Flareside 05701 2500 1989-2003 Full-size Trucks w/Styleside 6-1/2’ or 8’ bed 05700 2500 1989-2003 Full-size Trucks w/Flareside 05701 3500 1989-2003 Full-size Trucks w/Styleside 6-1/2’ or 8’ bed 05700 3500 1989-2003 Full-size Trucks w/Flareside 05701 S-10, S-15, Sonoma 1989-2003 Light Trucks w/Styleside 6-1/2’ or 8’ bed 05702 S-10, S-15, Sonoma 1989-2003 Light Trucks w/Flareside 6-1/2’ bed 05703 Dodge Ram 1993-2003 Full-Size Trucks w/Styleside 6-1/2’ or 8’ bed 05700 Dakota 1995-2003 Fender Side 6-1/2’ or 8’ bed 05704 Ford F-150 1996-2003 Full-Size Trucks w/Styleside 6-1/2’ or 8’ bed 05700 F-150 1996-2003 Full-Size Trucks w/Flareside 05701 F-250 Super Duty 1999-2003 Full-Size Trucks w/Styleside 6-1/2’ or 8’ bed 05700 F-250 Super Duty 1999-2003 Full-Size Trucks w/Styleside 6-1/2’ or 8’ bed 05700 Ranger 1984-2003 Light Trucks w/Styleside 6-1/2’ or 8’ bed 05702 Ranger 1984-2003 Light Trucks w/Flareside 6-1/2’ 05703 Nissan Pickup Hardbody 1996-2003 Light Trucks w/Styleside 6-1/2’ or 8’ bed 05702 Toyota Tacoma 1996-2003 Light Trucks w/Styleside 6-1/2’ or 8’ bed 05702 HOTSPOT MIRRORS

A.Stick-On Hotspots CIPA # Description Round Style convex blind spot mirrors feature convenient stick-on mounting. 49102 2” Round Convex Eliminates your blind spot for safe driving, passing and changing lanes. 49202 3” Round Convex 49302 3-3/4” Round Convex * Adjustable Hotspots 49402 4” x 5-1/2” convex 360 adjustable spot mirror attaches to your mirror, CIPA # Description giving you customized wide angle viewing 49104 2” Round Convex- 360 Adjustable! 49304 3-3/4” Round Convex - 360 Adjustable B. Clamp-On HotSpots Adjustable 5” style clamp-on convex spot mirror attaches to your mirror CIPA # Description bracket, giving you wide angle viewing for increased safety 49502 5” Clamp-On Chrome

C. Clamp-On HotSpots CIPA # Description Adjustable 4” x 8” clamp-on convex spot mirror attaches to your mirror 49504 4” x 8” Clamp-On Convex bracket, giving you wide angle viewing for increased safety CIPA # Description D. Wedge Hotspots 49002 1-1/2” x2” Convex Wedge Unique wedge design adds 30% more vision than round convex. 49702 2-1/2” x 3-3/4” Convex Wedge Great for all vehicles. 49403 3-1/4” x 3-1/4” Corner Wedge 49404 2” x 2” Corner Wedge E. Clip-On Safety Mirror Clips on the visor for added rear view vision. CIPA # Description 49602 Clip-On Safety Mirror F. Dual View Baby Mirror Clips on the visor, or suctions to your windshiled to keep an eye on back seat rid- CIPA # Description ers, watch cargo in vans and pick-ups, or keep an eye on your baby. 49606 Dual View Baby Mirror

A E F B

D C

173

TRUCK ACCESSORIES - BEDLINERS • BED MATS

LINE-A-BED® BEDLINERS Most Popular Applications are Available - Call Us Today!

SUPERIOR PROTECTION From the leader in truck bed innovation, the original Line-A-Bed™ bedliner is now better than ever. “SR” skid resistant technology helps keep loads secure and doesn’t wear off like “scuffed” skid resistant surfaces used by other brand bedliners. Line-A-Bed SR™ is loaded with features and delivers superior truck bed protection at an affordable price. BUILT-IN DURABILITY The Line-A-Bed SR™ bedliner is molded of durable, high density polyethylene to last as long as your truck. The high-ribbed floor pattern is designed to promote drainage and create additional cushioning against denting – a feature that you don’t get with other types of bed protection. ADDITIONAL FEATURES • Lifetime Warranty • True Customized Fit On Every Model • Molded in supports for Two-Tier Stacking and Lock-In Loading

BED MATS

174 TAILGATE COVERS & CAPS • HOOD SHIELDS

TREADPLATE TAILGATE CAPS AND COVERS

304 STAINLESS HOOD SHIELDS

• One piece - No welds •Won’t crack or chip 58912404 Chevy 88-C 58912405 Dodge 94-C 58912406 Ford 97-C

175 TRUCK BOXES

DIAMOND PLATE CROSSOVER TOOL BOXES

CROWN SERIES - SINGLE LID

PART NO. DESCRIPTION 73010839 58” Single Lid Crossover Box 73010840 58” Single Lid Deep Crossover Box 73010869 60” Single Lid Crossover Box 73010870 60” Single Lid Deep Crossover Box 73010884 63” Single Lid Crossover Box 73010885 63” Single Lid Deep Crossover Box 73010899 70” Single Lid Crossover Box 73010951 70” Single Lid Deep Crossover Box 73010965 72” Single Lid Crossover Box 73010966 72” Single Lid Deep Crossover Box

CROWN SERIES - GULLWING (DUAL LID)

PART NO. DESCRIPTION 74010816 51” Gull Wing Crossover Box 74010831 58” Gull Wing Crossover Box 74010861 60” Gull Wing Crossover Box 74010862 60” Gull Wing Deep Crossover Box 74010876 63” Gull Wing Crossover Box 74010884 67” Gull Wing Crossover Box 74010891 70” Gull Wing Crossover Box 74010892 70” Gull Wing Deep Crossover Box 74010957 72” Gull Wing Crossover Box 74010958 72” Gull Wing Deep Crossover Box

QUANTUM ATB SERIES

PART NO. DESCRIPTION 70011168 60” ATB Quantum Crossover with Rotary Latch 70011307 63” ATB Quantum Crossover with Rotary Latch 70011167 70” ATB Quantum Crossover with Rotary Latch

176 TRUCK BOXES

DIAMOND PLATE TRUCK CHESTS & SPECIAL USE BOXES

TRUCK CHEST BOXES

SIDE MOUNT • TOP MOUNT • UNDERBODY BOXES

177 TRUCK BOXES

WHEEL WELL BOXES

• Two sizes available (48” & 60” long) • Fits in unused space around wheel well • Height accommodates tonneau cover

PART NO. DESCRIPTION 68012344 48” Length x 18” Height x 8” Width Wheel Well Box 68012345 60” Length x 18” Height x 8” Width Wheel Well Box

A-FRAME TRAILER TONGUE BOXES

• Two sizes available (short and tall) • Designed to fit available space on trailer tongue • Storage space for ropes, heavy chains, tie downs, etc.

PART NO. DESCRIPTION 66012336 18” Height x 19” Deep x 33” Width 66012214 22” Height x 14” Deep x 34” Width

FIFTH WHEEL BOXES

• Two styles available • The V Top allows for greater accessibility from either side of truck when attched to trailer. Will fit almost all fullsize truck beds. • The Slant Lid model allows for a clear view into the bed of the truck at all times. Box will not hinder accessibilty of your fifth wheel.

2 LID BOX - V TOP SLANT LID PART NO. DESCRIPTION 62010215 5th Wheel Slant Lid 56”L x 19”W x 19”H 62011171 “V” Top, 2 Lids 56”L x 19”W x 19”H

178

TRUCK TAILGATES • BED RAILS • RUNNING BOARDS

TUBULAR TAILGATES

PLEASE CALL FOR APPLICATIONS

BED RAILS

PLEASE CALL FOR APPLICATIONS RUNNING BOARDS

PLEASE CALL FOR APPLICATIONS

179 TRUCK BOXES

LOW RIDER SERIES SINGLE LID ALUMINUM CROSSOVERS

LOW PROFILE SINGLE LID ALUMINUM CROSSOVERS

232000 232002 * *

* * * *

* Non-Stocking Item - Available by Special Order 180 * * * *

* * * *

* *

* * * * * *

* *

* Non-Stocking Item - Available by Special Order 181 TRUCK BOXES

STEEL SINGLE LID AND GULL WING CROSSOVERS

182 TRUCK BOXES

48” AND 59” LONG ALUMINUM INNERSIDES

* Non-Stocking Item - Available by Special Order

DELTA PRO ALUMINUM CHESTS

* *

* Non-Stocking Item - Available by Special Order

183 TRUCK BOXES

184 TRUCK BOXES

HEAVY-DUTY, WEATHER-RESISTANT, ALUMINUM AND STEEL UNDERBED BOXES

ALUMINUM TRAILER TONGUE BOXES

185 TRUCK BOXES

* * *

* Non-Stocking Item - Available by Special Order 186 TRUCK BOXES

* Non-Stocking Item - Available by Special Order

187

TRUCK BOXES

Aluminum Single Lid Deep Fullsize

HIGH-SECURITY CROSSOVERS

Aluminum Gull Wing Deep Fullsize

* * * * * * * * * * * * *

* * * * * * *

* * * * Non-Stocking Item - Available by Special Order

Steel Gull Wing Deep Fullsize Single Lid Deep Fullsize

* * * * * * *

* *

* Non-Stocking Item - Available by Special Order 188 TRUCK BOXES

HIGH-SECURITY INNERSIDES BOXES Available in Clearcoat, Black & Unpainted Aluminum White or Black Steel

** ** ** * * * * * * * * * * *

* Non-Stocking Item - Available by Special Order

189 TRUCK BOXES

HIGH-SECURITY HEAVY GAUGE TOPSIDE BOXES Available in Clearcoat, Black & Unpainted Aluminum White or Black Steel

Rugged 100-Gauge Aluminum Rugged 14-Gauge Steel Reinforced Doors, Center Post and Ends Reinforced Doors, Center Post and Ends for Superior Strength, Durability and Security for Superior Strength, Durability and Security

** * * *

** * *

** **

* Non-Stocking Item - Available by Special Order 190 TRUCK BOXES

EXTRA-DUTY UNDERBED BOXES * * * *

* * * * *

* * * * * *

JOBOXHEAVY-DUTY CASTER SETSJOB - INCLUDES SITE TWO FIXED STORAGE AND TWO SWIVELING CASTERS. BOXES

Model Size UPC 601040 * 4” 0-43419-90087-5 602040 * 6” 0-43419-90088-2

CHESTS

Model # UPC L W H Usable Shipping Shipping Dimensions shown in inches. Cu. Ft. Wt. Lbs. Cu. Ft. 650990 0-43419-90551-1 30 16 12 3.3 33.0 4.6 652990 0-43419-90552-8 36 17 19 1/2 5.8 89.0 8.8 653990 0-43419-90553-5 42 20 23 3/8 9.3 108.0 13.8 654990 0-43419-90554-2 48 24 27 3/8 15.4 141.0 22.3 655990 0-43419-90555-9 60 24 27 3/8 19.3 171.0 27.3 656990 0-43419-90556-6 48 30 33 3/8 24.3 175.0 33.3

SLOPE LID CHEST

Model # UPC L W H Usable Shipping Shipping Dimensions shown in inches. Cu. Ft. Wt. Lbs. Cu. Ft. 680990 0-43419-90557-3 60 9/16 30 39 1/2 32.7 245.0 45.5

PIANO BOX

Model # UPC L W H Usable Shipping Shipping Dimensions shown in inches. Cu. Ft. Wt. Lbs. Cu. Ft. 682990 0-43419-90558-0 60 7/8 31 11/32 49 1/2 47.5 323.0 59.2 * Non-Stocking Item - Available by Special Order 191 FUEL TRANSFER TANKS

192 FUEL TRANSFER

Our Most Popular Fuel Transfer Pump

Cable and Switches

1200R9067 18’ Two Wire Cable 1200F3170 Lineswitch1200 series Model 1210C Filter Kits and Elements

1200KTF7019 Particulate Filter Kit Fits 100/5200/1200 Series 1200KTG9075 3/4” Cast Filter Head Standard-Duty Fits 100/5200/1200 Series 1810PM1 Canister Filter w/Drain 12 Volt DC Pumps Fits 100/5200/1200 Series F1810HM0 Hydrosorb Element Model SD1202A Fits 1200KTF7019 Kit F4010PM0 Particulate Element Use with 1” Filter Head 700ACCF7017 1 inch Alum. Filter Head

Nozzles and Accessories

NO75UAU10 3/4” Auto Nozzle 6U075 3/4” Manual Nozzle N100DAU10 1” Auto Off Nozzle 700F3125 1” Manual Nozzle 4200F9111 Nozzle Hook

Pump Hoses Model 4210D Has 1 inch thread 700F3135 3/4” X 12’ Hose FRH10012 1” x 12’ Hose w/spring guard FRH10020 1” x 20’ Hose w/spring guard

Pump Meter Kits

807CMK Fits 700 & 1200

Pump Rebuild Kits

1200KTF Repair Kit fits 1210A / 1210B 4200KTF Repair Kit Model 700 fits 1210C / 4200D

Model 112 Model 112C

Model 152

Model 113 - Pump Only, No Hose or Nozzle

193 FUEL TRANSFER

Model # DMA001R Pump with Standard Nozzle and 10’ Hose

OPTIONAL #048521 Filter Kit Available

194 TRUCK ACCESSORIES - RAMPS

RAMPS AND RAMP KITS

TRI-FOLD UTILITY LOADING RAMPS

SR69 - 45” Wide x 69” Long SR77 - 50” Wide x 77” Long SR69 & SR77 - 1500 lb. distributed load capacity 400 lb. point load capacity

• Tri-Fold design is constructed of durable, rust-resistant aluminum • Rungs are riveted for added strength, spaced 8” apart, and replaceable • Full-width top plate with non-marring, vinyl backing provides added stability and smooth transition between ramp and loading surface • Side rails feature raised edges to help guide wheels when loading and unloading. SR77 side rails have grooves to hold 1/4” plywood decking (plywood not included with SR77 model) - ideal for loading snowmobiles • Dual stability chains with S hooks for securing ramp to loading surface • SR69 folds to 15” in width, SR77 folds to 16” in width

FOLDING RAMPS

25710193 • Load it, fold it, stow it • Great for 4-Wheelers, snowmobiles, lawn tractors and motorcycles • Available in cross beam style-load tested for up to 1,000 lbs. Per ramp • Folds for convenient storage

RAMP KITS

Part # - RE8TB • Turns ordinary 2” x 8” boards into loading ramps! • 2-8” top & bottom plates with mounting hardware • Constructed of heavy-duty zinc plated steel • Easy & fast to assemble • Economical • Turns 2” x 8” (not included) into convenient all purpose ramps • Mounting bolts, hardware and easy-to-install instructions are included • Top plates feature traction grips • Ideal for loading and unloading all terrain vehicles, garden tractors and mowers, motorcycles, wheelbarrows, wheelchairs, hand trucks, and more

RAMP CHAMP - LIGHTER! TOUGHER! STRONGER THAN STEEL!

750 lb per ramp Ramp Champ is the perfect solution to all your loading needs. Heavy Duty composite structural technology delivers superior 750 lbs. per ramp performance. Telescopes from 5 1/2’ to 8’ RAMP CHAMP • Rustproof for lifetime performance Part No. Description Unit • Impervious to gas, oil and extreme temperatures 11200 Ramp Champ Pair • Raised edge keeps tires on ramp 11201 Ramp Champ Single • TRA Control non-slip surface for extra traction • Arched design for additional clearance • No hinge point...no chance of pinching fingers • Convenient to store...Slides under ATV

195

TRACRAC SYSTEMS AND TONNEAU COVERS

TRUCK & VAN RACK AND ACCESSORIES

NEW! TracTonneau - Truck Bed Cover

Standard System Includes: • Tonneau Cover • Transverse Support Tubes • Front Tensioning Beam • Rear Locking Bar • TracRac Integration Rails

• Automatic Tension Control • 2 Year Warranty • Floating Hook Technology • Fast Easy Roll-Up

196

VANRACK • T-RAC • CAPRACK • ACCESSORIES

The Premium Cap Rack

Part No. 29200 Standard System Includes: • 2 Overhead Racks • 4 Crossbar Tiedowns

197 TRUCK & VAN UTILITY RACKS

CAP RACKS LADD RACK UNIVERSAL - MODEL NO. LRUNC

Fits all make trucks with cab height caps. 25" clearance from foot plate to bottom of adjustable cross bar. Rack may be removed from extendo-plate without disturbing cap seal. (1997-98 Ford F150 and light duty F250 require special plates. Please specify when ordering). Weight: 62 lbs. UPS Acceptable

Steel Tubing: 1.625 O.D. - .097 wall thickness Leg Plates: Angle Iron (2" x 2") x 91/2" x 3/16" Extendo Plates: 5" x 12" x 1/8" Load Capacity: 500 lbs., uniformly distributed Color Finish: Black, White, Blue.

Includes two (2) Ladder Positioners

LADD RACK UNIVERSAL - MODEL NO. LRUNC-HL Fits most highrise truck caps. A choice of two clearance heights 28" or 32" from foot plate to bottom of adjustable cross bar. Rack may be removed from extendoplate without disturbing cap seal. (1997-98 Ford F150 and light duty F250 require special plates. Please specify when ordering). Wt. 68 lbs. UPS Acceptable

Steel Tubing: 1.625 O.D. - .097 wall thickness Leg Plates: Angle Iron (2" x 2") x 91/2" x 3/16" Extendo Plates: 5" x 12' x 1/8" Load Capacity: 500 lbs., uniformly distributed Color Finish: Black, White, Blue.

Includes two (2) Ladder Positioners

TRUCK CADDY RACKS - MODEL NO. TCR FOR FULL & MID SIZE PICK-UPS AND MOST IMPORTS

Extended Cab TCR's are available for Ford, Chevy, GMC and Dodge. Add "CC" to model number when ordering. TCR FEATURES: 1. Rear End Bar swings 180 degrees and also locks in place. 2. Torsion bar truss adds strength. 3. Cab over extension is standard. 4. Built-in window protection.

MATERIAL & STRENGTH SPECIFICATIONS Steel Tubing: 1.625” O.D. - .090 wall thickness Angle Iron: 13/4" x 13/4" x 3/16" Torsion Bar: 1" x 1/4" Window Screen: 9-gauge flattened expanded steel x 1 1/2" mesh. Load Capacity: 1,000 pounds, uniformly distributed. Color Finish: Black, Blue, White.

198 TRUCK & VAN UTILITY RACKS

LADD RACKS ADJUSTABLE LADD RACKS

MAKE OF TRUCK YEAR MODEL NO. WEIGHT Chevrolet & GMC - Full Size - Wide ALL LRA 54 lbs. Chevrolet S-10 & GMC S-15 Dodge Full Size ˙ Dodge Dakota Dodge Ram-50 ˙ Ford Full Size Ford Ranger ˙ Isuzu ˙ Jeep Comanche Mazda ˙ Mitsubishi ˙ Nissan ˙ Toyota Chevrolet & GMC Full Size - Narrow - ALL LRA-ST 47 lbs. Sport Side (Straight Legs) Ford Full Size - Narrow - Flareside (Straight Legs) Material & Strength Specifications for Standard Ladd-Rack (LRA): Steel Tubing: 1.625 O.D. - .097 wall thickness We strongly recommend using Horizontal Bars Leg Plates: Angle Iron (2" x 2") x 91/2" x 3/16" (LR-HB) due to thin bedrails on newer trucks. Load Capacity: 400 lbs., uniformly distributed with optional horizontal bars. Color Finish: Black, Blue, White.

Includes two (2) Ladder Positioners CAB GUARD ALUMINUM VAN RACKS The screen that protects the truck cab window is made of 9-gauge flattened, expanded steel x 1 1/2" mesh.

Material & Strength Specifications Standard Cab Guard (CG) Steel Tubing: 1.625 O.D. - .097 wall thickness Leg Plates: Angle Iron (2" x 2") x 9 1/2" x 3/16" Color Finish: Black, Blue, White.

Model No. 80000

Shown on 1996 Chev. GMT 600 Van THE RACK YOU'VE BEEN WAITING FOR!

Model No. VRAL • 6000-Series Anodized Aluminum Cross Bars • 400 Lbs. Capacity (evenly distributed) • Adjustable Dual Material Positioners • Fits All Vans With Rain Gutters • Stainless Steel Hardware • Rugged Cast End Plates • Dual Gutter Clamps • Ships UPS

When ordering extra middle half bar for 1992 and newer Ford Vans, specify VRAL Shim Kit. When ordering extra middle half bar for 1996 and never Chevrolet/GMC Vans, specify #29700 Shim Kit.

199 TRUCK AND VAN UTILITY RACKS

*VAN RACK SYSTEMS BLACK ROUND CROSSRAILS EXTEND FROM 50" TO 72"

MODEL DESCRIPTION 98701 2 Bar System-500 lb. capacity. 98731 3 Bar System-750 lb. capacity. Will work on all vehicles with external raingutters except 1992-present year Ford Econoline Vans (see 98701-98712). 98711 1 Bar System-center rail for all vans with external raingutters except 1992-present Ford Econoline Vans (see 98712). 98712 1 Bar System-center rail for1992-present year Ford Econoline Vans. 98705 2 Bar Van Rack Adapter Kit. Must be used when installing Model #98701 Van Rack to Chevy Astro, Gmc Safari, and Ford Aerostar. 98735 3 Bar Van Rack Adapter Kit-same as 98705; but for 98731 and 98701/98712. 00975 Gutter Hook Adapter-compatible with the Van Rack System for vans with sliding doors.

*VAN MASTER SYSTEMS WHITE, SQUARE CROSSRAILS WITH TRIANGULAR WELDED UPRIGHTS\ (CROSS RAILS MAY BE CUT FOR CUSTOM FIT)

MODEL DESCRIPTION 98740 2 Bar System-750 lb. capacity. 98750 3 Bar System-1000 lb. capacity. Will work on all vehicles with external raingutters except 1992-present year Ford Econoline Vans (see 98740-98746). 98745 1 Bar System-3rd center rail for all vans with external raingutters except 1992-present Ford Econoline Vans (see 98746). 98746 1 Bar System-3rd center rail for 1992-present year Ford Econoline Vans. *Will not fit 1996/97 Chevy GM T600 and GMC Savannah Full Size Vans. PICKUP TRUCK SYSTEMS

MODEL DESCRIPTION 98890 Truck Rack fits all 6 1/2' to 8' bed pickup trucks. Rack capacity is 1/2 of the bed's total capacity. Black 98760 Duo Pickup Truck Rack-2 removable uprights with arms that can be adjusted to two different positions. White

200 TRUCK UTILITY RACKS

FUNCTION AND STYLE FOR TODAY’S PICKUP TRUCKS

Today’s Pickups look great, so why destroy their good looks with an awkward full frame rack? Backrack combines the strength & utility you demand with distinctive styling that compliments your truck. Backracks are made using 2” heavy gauge “Pickled & Oiled” steel tubing, giving a clean, scale-free steel finish for maximum rust resistance.

SECURE CARGO and tie shifting loads to the Backrack. The Backrack’s strength and rigidity make it ideal for industrial, commercial and construction applications. Backrack’s no-mesh design makes it easy to tie ropes, attach straps, or hook rubber cords used to hold cargo.

MOUNT LIGHTS, ANTENNAS and other accessories using one of the 7 different models of accessory Light Brackets. They simply bolt or clamp right onto the Backrack. Pictured here are the optional dri- ver side and center mount Utility light Brackets, and the passenger side mounted Sport Light Bracket.

CARRY LADDERS or any long load on the Backrack, with or without the REARBAR accessory pictured. The Backrack installs quickly and easily into the stakepockets, without drilling on most applications. The Backrack is compatible with all bedliners, and special Toolbox Brackets accommodate any cross-bed toolbox.

PART # DESCRIPTION 10310 Backrack Maz/Toy/D50 Isuzu not Tacoma 10310TD Backrack Dakota 87-96 10311 Backrack Ranger 82+ Mazda 84-00 10312 BackrackS-10 82+ Nissan 86.5-00 10313 Backrack Dakota 97+ 10316 Backrack GM Colorado/Canyon 04+ 10501 Backrack Super Duty 99+ F250-550 HD 10502 Backrack F-150 97+ 10502SC Backrack Supercrew 01+ 10503 Backrack Chevy 88-98 10503T1 Backrack T-100 93-98 (10503 & 911111) 10504 Backrack Chevy 68-87 Dodge 69-93 10505 Backrack Ford 75-96 6.5’ Bed Only 10506 Backrack Ford 75-96 F250 97-98 10507 Backrack Dodge 94-01 not 2002 10508 Backrack Tundra 00+ 10509 Backrack Chevy/GMC 99+ 10509DW Backrack HD Chevy Dually Only! 00+ 10511 Backrack Nissan Titan 04+ 10512 Backrack Ford F-150 New Body Style 04+ 10517 Backrack Dodge 02+ 10803 Backrack Sportside 88-98

Add the letters TB to a number to have rack w/tool box brackets.

201

TRUCK AND UTILITY RACKS SAFETY RACK

COMPLETE WINDOW PROTECTION THAT IS FUNCTIONAL AND STYLISH

MOUNT ANY LIGHT OR ANTENNA WITH THE UNIVERAL 41000 LIGHT BRACKET The new 41000 univeral Light Bracket provides a variety of options for you to mount strobe lights, light bars, remote spots, antennas, mini light bars, or any type of accessory on to the Safety Rack. Why drill costly holes into the sheet metal of your truck. Speeds and simplifies the installation of lighting and accessories while preserving the resale value of your truck. Light Bar on 2-41000 spaced apart SECURE CARGO CARRY LADDERS The safety Rack provides complete rear window protection for your truck and increased safety for your truck and increased safety for you and your passengers. The 3/16” diameter welded wire screen offers excellent visibility through its two inch centers. The full cab width design gives you 51 inches of cargo space for loading ladders and other long items. The accessory Rear Bar makes carrying long loads even more convenient and simply lifts out of the rear pockets of your truck when not needed. The wire screen provides a place to tie rope or hook a bungee strap wherever you need one. Mini Light Bar on 2-41000 side by side SECURE YOUR TOOLBOX WITHOUT DRILLING HOLES IN YOUR TRUNK BED The Safety Rack is secured to the majority of trucks without having to drill holes through the bed rail. If your truck has a cross bed toolbox our toolbox Brackets also allow you to secure your toolbox without drilling holes. Simply place your box on these brackets and drill through the Toolbox Brackets, not your sheet metal. Instantly increases the resale value of your truck. CALL FOR OTHER ACCESSORIES.

A FUNCTIONAL AND ATTRACTIVE RACK Part #41000 Light Bracket (10.5”x10.5”) MAKES YOUR TRUCK MORE VERSATILE The Safety Rack is manufactured from strong, durable pickled and oiled steel tubing and cold rolled 3/16” wire. These quality materials are then assembled on our state of the art robotic welding equipment.

The screen protecting your window is a 3/16” diameter cold rolled wire that is spot welded at each intersection and robotically welded into the square tube frame.

The Safety Rack is finished with an attractive and durable black powder coat finish. All fasteners used to secure the Safety Rack are plated with zinc dichromate meeting automakers specifica- 2-41000 Light Brackets w/strobe & remote spot tions.

The Safety Rack provides strength, versatility, and style that is unmatched by any other cab guard.

PART # DESCRIPTION 40310 Safetyrack Toy 87-TD NIS 86.5-TD S10 82+ 40311 Safetyrack Ranger 93-TD Mazda 40313 Safetyrack Dakota 97+ 40501 Safetyrack SD Ford 99+ 40502 Safetyrack Ford F-150 LD250 97+ 40503 Safetyrack Chevy 68-98 Dodge 69-93 Safety Rack with accessory Rear Bar 40503T1 Safetyrack T-100 93-98 40504 Safetyrack F150 Super Crew 99-01 40505 Safetyrack Ford 76-96 Short Bed Only 40506 Safetyrack Ford 76-96 Long Bed Only! 40507 Safetyrack Dodge 94-01 40509 Safetyrack Chevy 99+ New Body Styl 40509DW Safetyrack Chevy HD Dually 99+ 40517 Safetyrack Dodge 02+

Add the letters TB to a number to have rack w/tool box brackets. Safety Rack w/Toolbox Brackets and 91004 Arrow Stick brackets(pr)

202