Wild Ht Shimano Technical Manual Wild Ht Technical Specifications 1
Total Page:16
File Type:pdf, Size:1020Kb
BLUE PAPERS WILD HT SHIMANO TECHNICAL MANUAL WILD HT TECHNICAL SPECIFICATIONS 1 CONTENT GEOMETRY 3 GENERAL INFO 4 SPECIFICATIONS 5 OPTIONS 6 PARTS & HARDWARE 8 CABLE ROUTING 23 FRAME AND MATERIAL 27 WILD HT SHIMANO WILD HT TECHNICAL SPECIFICATIONS 3 GEOMETRY SIZES S M L XL 1 - Seat tube (C-T) 390 390 415 440 2 - Top tube (EFF) 575 595 624 653 3 - Head tube 115 130 145 160 4 - Chain stay 445 445 445 445 5 - BB drop 63 63 63 63 6 - BB height 305 [FOR 29X2,6”] / 296 [FOR 27,5X3,0”] 7 - Wheel base 1113 1134 1165 1195 8 - Head angle 67º 67º 67º 67º 9 - Seat angle 72,5º 72,5º 72,5º 72,5º 10 - Fork offset – Rake 51 51 51 51 11 - Standover height 29x2.6” 690 690 690 690 11 - Standover height 27x3,0” 678 678 678 678 12 - Reach 375 390 415 440 13 - Stack 634 647 661 675 14 - Fork length 527 [FORK 120MM] 527 [FORK 120MM] 527 [FORK 120MM] 527 [FORK 120MM] ERGONOMY HEIGHT (cm) HEIGHT (in) SIZE 155-170 61-67 S 165-185 65-73 M >180 >71 L Maximum tyre dimension: 28” [Maximum external dimension 687mm] * Estimated measurements. WILD HT TECHNICAL SPECIFICATIONS 4 GENERAL INFO RIM 27,5 AND 29 BB MOTOR SHIMANO DU_E8000 ISCG NO FORK 120 MM SHOCK SIZE ------ SUSPENSION TRAVEL ------ SHOCK MOUNTING HARDWARE ------ SEATPOST 31,6 MM SEAT CLAMP 35 MM FRONT DERAILLEUR NO,FD. SINGLE FRONT WHEEL HEAD TUBE [1-1/8”,45º/45º UPPER_ 1,5”,36º/45º LOWER] SPECS: FSA ORBIT C-40 (NO.42) REAR AXLE STANDARD BOOST 148 MAX TIRE SIZE 27” 3,0” (TIRE SIZE VARIES BY BRAND, SOME MAY NOT FIT) MAX TIRE SIZE 29” 2,6” (TIRE SIZE VARIES BY BRAND, SOME MAY NOT FIT) CRANKSET 177 MM Q FACTOR COMPATIBLE [CENTRO A INTERIOR BIELA R/L; 72,6MM/72,6MM] CHAINRINGS 1X: 34T MAX CHAIN LINE 53MM WILD HT TECHNICAL SPECIFICATIONS 5 SPECIFICATIONS DIRECTION 1" 1/8 - 1" 1/5 – FSA [087_NO_42-CF-ACB] MOTOR SHIMANO E8000 – [15,8º] BB SHIMANO_ DRIVE UNIT 8000 FRONT DERAILLEUR NO FRONT DERAILLEUR TP/DP NO FD ANGLE NO SEAT POST DIAMETER 31,6 MM SEAT CLAMP 35 MM DROPOUT 12X148 ONLY CHAINSTAY PROTECTOR 11000410-PROT BASE WILD HT BOSCH 18 OTHER PROTECTORS 11000375-PROT GOMA TUBO DIAG WILD FS 18 CABLE TYPE FULL HOUSING REAR HUB LENGHT 148 WILD HT TECHNICAL SPECIFICATIONS 6 OPTIONS V-BRAKE NO DISC BRAKE ONLY BRAKE REAR BRAKE IS/PM+DIAMETER DISC 160 PM, 180 COMPATIBLE CALIPER BRAKE NO 11 SPEED SRAM & SHIMANO DOUBLE CRANK NO GEARS COMPACT CRANK (34X50T) (ROAD) - TRIPLE CRANK NO OXYMETRIC NO WILD HT TECHNICAL SPECIFICATIONS 7 OPTIONS Groupsets BTT SHIMANO XTR (10) YES XTR/XT (11) YES SAINT (9) NO DEORE XT (9/10) YES SLX (9/10) YES ZEE (10) NO HONE (9) NO DEORE LX (8/9) NO DEORE (9/10) YES ALIVIO (8/9) YES ACERA (8) NO ALTUS (8) NO TOURNEY (8) NO SRAM XX1 (11) YES XX (10) YES X0 (10) YES X9 (10) YES X7 (10) YES X5 (9/10) YES X4 (8/9) NO X3 (7) NO WILD HT TECHNICAL SPECIFICATIONS 8 PARTS & HARDWARE Mechanic groupe AND Seatpost Digit or Standard 1 2 22 7 24 17 3 13 3 4 8 5 3 4 5 WILD HT TECHNICAL SPECIFICATIONS 9 PARTS & HARDWARE Mechanic groupe AND Seatpost Digit or Standard 9 4 3 2 1 8 12 15 25 26 17 7 18 19 5 WILD HT TECHNICAL SPECIFICATIONS 10 PARTS & HARDWARE Mechanic groupe AND Seatpost Digit or Standard NÚMERO REFERENCIA NOMBRE/DESCRIPCIÓN 1 11001161 TAPON GOMA RANURA 30X10MM 18- PARA ESPESOR 3MM 2 11001163 TAPON GOMA 3MM RANURA 22X8 3 12300017 TORNILLO INOX M8X20 DIN6912 4 12310017 TUERCA BARRILETE M5X10 NEG 5 12301077 TORNIL INOX M5X12 ISO7380 6 11000403 PROTECTOR MOTOR 7 11000400 BOTON BATERIA WILD FS 8 11202827 SENSOR VEL DUE11 18 760MM 9 FOAM DIAMETRO INTERNO 8MM-300MM 10 12300059 TORNILLO INOX M4X8-DIN 7991 11 TORNILLO INOX M3X8 DIN 7991 12 11200003 IMAN DIAM 15X3MM 25 11000415 TAPA BATERIA WILD FS S/TAP ALU 26 11000416 TAPA ALUMINIO WILD FS BRUTO 15 FOAM DIAMETRO INTERNO 8MM-500MM 13 11200001 IMAN M5 SENSOR VELOCIDAD DUE11 16 11001172 GUIA ROSCADA D4 PARA M5X9 17 11000402 KIT SOPORTE DE BATERIA WILD FS 18 12311020 TUERCA INOX ALLEN M5-DIN 985 19 12321020 ARANDELA INOX M5 / DIN 125-M5-INOX 20 11000366 PROT BASE PLAST OCCAM HYDRO 16 21 11000375 PROT GOMA TUBO DIAG WILD FS 18 22 11160850 ABR SIL C/R 34.9 DIGIT NEG 22 11160827 ABR SIL C/T 34.9 ALU NEG 23 11000118 BRIDA 2,5X100 NEGRA 24 11000219 GOMA EXTRACCION BATERIA ORBEA 25 11000415 TAPA BATERIA WILD FS S/TAP ALU 26 11000416 TAPA ALUMINIO WILD FS BRUTO WILD HT TECHNICAL SPECIFICATIONS 11 PARTS & HARDWARE 1. Batery support I 1 2 3 4 1 2 4 5 3 4 5 2 6 5 6 6 PART NUMBER REFERENCE ORBEA DESCRIPTION 1 11200004 IMAN DIAM 12 C/ESPARRAGO M4 2 DIN 125-M4-INOX 3 DIN 934-M4-INOX 4 12311020 DIN 985-M5-INOX 5 12320510 DIN 125-M5-INOX 6 12301077 DIN 7380-M5X12MM-INOX WILD HT TECHNICAL SPECIFICATIONS 12 PARTS & HARDWARE 2. Batery support II 1 1 2 2 1 1 2 2 PART NUMBER REFERENCE ORBEA DESCRIPTION 1 DIN 933-M4X8MM-INOX 2 DIN 125-M4-INOX WILD HT TECHNICAL SPECIFICATIONS 13 PARTS & HARDWARE 3. Batery cover 2 1 2 PART NUMBER REFERENCE ORBEA DESCRIPTION 1 11000415 TAPA BATERIA WILD FS S/TAP ALU 2 11000416 TAPA ALUMINIO WILD FS BRUTO 3 11200003 IMAN DIAM 15X3MM WILD HT TECHNICAL SPECIFICATIONS 14 PARTS & HARDWARE 4. Speed magnet 4 PART NUMBER REFERENCE ORBEA DESCRIPTION 4 11200001 IMAN M5 SENSOR VELOCIDAD DUE11 WILD HT TECHNICAL SPECIFICATIONS 15 PARTS & HARDWARE 5. Motor screws PART NUMBER REFERENCE ORBEA DESCRIPTION 1 12300017 TORNILLO INOX M8X20 DIN6912 WILD HT TECHNICAL SPECIFICATIONS 16 PARTS & HARDWARE 6. Motor protector 1 1 1 1 2 2 3 2 2 PART NUMBER REFERENCE ORBEA DESCRIPTION 1 12310017 TUERCA BARRILETE M5X10 NEG 2 12301077 TORNIL INOX M5X12 ISO7380 3 11000414 PROTECTOR MOTOR WILD HT BOSCH WILD HT TECHNICAL SPECIFICATIONS 17 PARTS & HARDWARE 7. Bolts for Motor cover PART NUMBER REFERENCE ORBEA DESCRIPTION 1 12310017 TUERCA BARRILETE M5X10 NEG 2 12301077 TORNIL INOX M5X12 ISO7380 PROTECTOR MOTOR WILD HT TECHNICAL SPECIFICATIONS 18 CABLE ROUTING Mechanic groupe + Hydraulic seatpost READ DERAILLEUR DISPLAY-DRIVE UNIT TT; FOAM DIAM INTERNO 8MM-300MM TELESCOPI SEATPOST DT; FOAM DIAM INTERNO 8MM-500MM REAR BRAKE BATTERY-DRIVE UNIT MAGNET WILD HT TECHNICAL SPECIFICATIONS 19 FRAME AND MATERIAL Orbea frames are carefully designed to be durable, 2) Bring your bike to your Orbea dealer for pro- efficient, and easy to maintain. Wild tubes are stiff and 3) Inspect your Wild before you ride AFTER A CRASH OR IMPACT fessional inspection. Some damage can only be de- light, giving excellent steering precision and pedaling tected by disassembling the bike to check for cracks Do a quick check before every ride to make sure your Falling is part of riding and it’s impossible to avoid efficiency. Wild carbon frame is extremely resistant to or other signs of stress. bike is in excellent condition. It is very common to dis- minor accidents. If you crash your Wild, please make corrosion, making it perfect for road. With only a mi- cover small issues at home that can become big pro- sure you are okay and seek medical attention if ne- nimum amount of maintenance, it’s easy to keep your A crash or impact can put extraordinary stress blems on the trail. CHAIN Is the chain dirty, noisy or cessary. If you are not injured, you should check your Wild in top condition. on your bike and components, causing them dry? Clean and lube your chain before riding. BRAKES bike before continuing: to fail or to fatigue prematurely. Failure can Check your brakes to make sure they are working happen suddenly with no warning, causing loss correctly. Check for missing/loose caliper and rotor 1) Inspect your frame and components for da- of control, serious injury or death. 1) Keep your Wild clean bolts. TIRES Look for damage to the sidewalls of your mage. Do not ride your bike if any problems are de- tires. Check and adjust tire pressure. WHEELS Spin tected. Washing your bike with mild soap and water will keep the wheels and look for wobbles, check for loose or you looking stylish and allow you to check the con- broken spokes. Check quick release levers to make dition of the frame and components. Don’t use high sure they are functioning properly. FRONT END Stand water pressure and avoid spraying water into bearings WHAT TO LOOK FOR over the saddle, pull on the brakes and rock the bike or frame tubes. Citrus degreasers are biodegradea- back and forth. Feel for any play or knocking that Inspect Frame and fork for evidence of cracking or ble and do a great job of removing dirty grease from might indicate a loose headset, loose brake rotors or bending. If cracks are discovered, discontinue use gears and chain. calipers, or worn fork bushings. immediately. TEST RIDE Take a quick ride up and down the street to make sure your bike is shifting and braking properly. Check the drivetrain and spin the wheels to make sure 2) Keep your Wild lubed Listen for unusual noises. components are operating correctly. If you discover damage to your components, discontinue use imme- Once your bike is clean, it’s a good time to put fresh diately.