DOCSLIB.ORG

The Impact of Luminous Properties of Red, Green, and Blue Mini-Leds on the Color Gamut

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
The Impact of Luminous Properties of Red, Green, and Blue Mini-Leds on the Color Gamut IEEE TRANSACTIONS ON ELECTRON DEVICES, VOL. 66, NO. 5, MAY 2019 2263 The Impact of Luminous Properties of Red, Green, and Blue Mini-LEDs on the Color Gamut Weijie Guo , Nan Chen, Hao Lu, Changwen Su, Yue Lin , Guolong Chen, Yijun Lu , LiLi Zheng, Zhangbao Peng , Hao-Chung Kuo, Fellow, IEEE, Chih-Hao Lin, Tingzhu Wu , and Zhong Chen Abstract— Color gamut is of the paramount importance and virtual reality (VR) devices [2]. Nowadays, these two lead- in the display.Light–current–voltage(L–I–V ) characteristics ing display technologies are both pursuiting the high dynamic of red, green, and blue flip-chip mini-light-emitting diodes range (HDR) features [3]. Although the OLED display has (LEDs) (100 µm × 200 µm) are investigated at temperatures similar to the operational temperatures. Both the ideality been commercialized in portable devices, monitors, and tele- factor and the temperature dependence of external quantum visions [4], and begun attracting interest in flexible or foldable efficiency (EQE) suggest that the nonradiative loss in red devices, the LCD with mini-LED backlight is still among the mini-LED is higher. We also illustrate the intensive lateral most promising technologies for the next-generation flat dis- luminous intensity fluctuation for red mini-LED under the play due to the superiorities in low cost and mass production over-driving current by capturing the spatial emission map- ping. The influence of temperature and driving current on capabilities [3]–[5]. The mini-LED, with sizes ranging from the chromaticity coordinates of mini-LEDs is determined. 100 to 200 μm, serves as the light source in backlight of Furthermore, we propose a drive-current algorithm to maxi- LCD, showing the potential to replace the phosphor-converted mize the color gamut of the trichromatic mixed light at differ- white light LEDs (PC-LEDs) [6]. Benefiting from the tiny ent temperatures. The results indicate that, for the applica- pitches and the larger number of dimming zone, the red, tion of self-emitting mini-LED displays, the maximum color gamut is more sensitive to green emission, whereas enhanc- green, and blue (RGB) full color mini-LED array could also ing the radiative recombination in red mini-LED could con- achieve self-emitting displays if the angular resolution density tribute a lot to the improvement on net performance. is high enough [3]. In addition, being tiny also adapt mini- Index Terms— Displays, mini-light-emitting diode (LEDs), LEDs for thinner or curved displays, which is highly desirable color gamut. for smartphone applications [6]. As RGB LEDs have different thermal and luminous char- I. INTRODUCTION acteristics, the variation in one color can exert the obvious HE fact that the light emission of light-emitting diode change on chromatic properties of the mixed color [7]. The T(LED) can be controlled precisely facilitates the improve- understanding on the electrical-thermal-chromatic character- ments in performance of displays [1]. Liquid crystal display istics of RGB mini-LED chips is essential for the design (LCD) and organic LED (OLED) displays are two dominating of driver, mechanical structure and heat dissipation of self- technologies for TVs, smartphones, augmented reality (AR), emitting mini-LED displays [8]. In this paper, light–current–voltage (L–I–V ) characteristics Manuscript received January 3, 2019; revised March 4, 2019; accepted of RGB flip-chip type mini-LEDs at temperatures ranging March 17, 2019. Date of publication April 4, 2019; date of current version April 22, 2019. This work was supported in part by the National Natural from 300 to 380 K are determined experimentally. More- Science Foundation of China under Grant 61504112, Grant 11604285, over, the influence of driving current on the distribution of Grant 51605404, Grant 11504182, and Grant 11674054, in part by radiative recombination is also measured. The temperature the Science and Technology Project of Fujian Province under Grant 2018H6022, in part by the Natural Science Foundation of Fujian Province and current-injection dependences of the centroid wavelength, under Grant 2018J01103, in part by the Technological Innovation Project spectral width, and chromaticity coordinates for RGB mini- of Economic and Information Commission of Fujian Province, and in part LEDs are determined. We further discuss the influence of by the Strait Postdoctoral Foundation of Fujian Province. The review of this paper was arranged by Editor C. Surya. (Weijie Guo and Nan Chen these properties on color gamut of the trichromatic mixed light contribute equally to this work.) (Corresponding authors: Tingzhu Wu; and propose a drive-current algorithm to maximize the color Zhong Chen.) gamut at different temperatures. It is shown that color gamut W. Guo, N. Chen, H. Lu, C. Su, Y.Lin, G. Chen, Y.Lu, L. Zheng, Z. Peng, T. Wu, and Z. Chen are with the Fujian Engineering Research Cen- of the RGB mixed system is more sensitive to the luminous ter for Solid-State Lighting, Collaborative Innovation Center for Opto- properties of green mini-LED. Therefore, the selection and electronic Semiconductors and Efficient Devices, Department of Elec- working condition of green mini-LEDs is critical for the color tronic Science, Xiamen University, Xiamen 361005, China (e-mail: [email protected]; [email protected]). gamut of self-emitting mini-LED displays. H.-C. Kuo and C.-H. Lin are with the Institute of Electro-Optical Engineering, National Chiao Tung University, Hsinchu 30010, Taiwan. II. EXPERIMENTS Color versions of one or more of the figures in this paper are available online at http://ieeexplore.ieee.org. We use commercial flip-chip type red (AlGaInP), Digital Object Identifier 10.1109/TED.2019.2906321 green (InGaN), and blue (InGaN) mini-LEDs as samples. 0018-9383 © 2019 IEEE. Personal use is permitted, but republication/redistribution requires IEEE permission. See http://www.ieee.org/publications_standards/publications/rights/index.html for more information. 2264 IEEE TRANSACTIONS ON ELECTRON DEVICES, VOL. 66, NO. 5, MAY 2019 Fig. 1. Illustration for chip structure of (a) red and (b) blue and green mini-LEDs. Fig. 3. Ideality factor of RGB mini-LEDs at the temperatures from 300 to 380 K. The ideality factors of red mini-LED reach 2.0. green and blue mini-LEDs suggest the existence of radiative recombination from localized states in these chips. As one of the commonly used parameters, the ideality factor (nideality) is associated with carrier transport and recombination in LED [10]. Fig. 3 illustrates the fitted nideality for mini-LEDs, Fig. 2. (a) Current–voltage–temperature characteristics of flip-chip type according to the relationship RGB mini-LEDs, measured at the temperatures from 300 to 380 K. (b) Typical shape of emission spectra for mini-LEDs at 300 K, the driving ∂ −1 µ µ µ e ln I current is 300 A for blue, 900 A for green, and 30 000 A for red, and nideality = (1) the insets are optical photographs of light emission from LEDs. kB T ∂V where e denotes the elementary charge, kB is the Boltzmann’s constant, and T is the temperature. nideality reach 2.05 ± Fig. 1 illustrates the structure of these mini-LEDs. Red mini- ± ± LEDs are grown on GaAs substrates originally and then the 0.07 for red mini-LEDs, 1.77 0.03 for green, and 1.39 epi layers are transferred to a sapphire substrate through the 0.04 for blue, indicating that the existence of SRH recombi- nation in green and blue, whereas the carrier loss is dominant bonding of an adhesive layer using the similar fabrication n process reported in literature [9]. Green and blue mini-LEDs in red. It has been reported that ideality of red LED gradually are grown on c-plane sapphire substrates. The sizes of these increases from 1.47 to 1.95 as the size decreases from 350 to 15 μm, due to the carrier loss through sidewall defects [10]. mini-LEDs are all 100 μm × 200 μm. We mount the samples on a temperature-controlled heat sink (TLTP-TEC, Talent, The red mini-LEDs with flip-chip structure experience more processing steps during fabrication, which may generate higher China) and measure the electrical and luminous properties of n them from 300 to 380 K. During the measurements, samples density of sidewall defect and cause higher ideality. are driven by a current source (Keithley 2400, Keithley Inc., All of the external quantum efficiency (EQE) curves of RGB mini-LEDs drop as a whole when the temperature USA), and a spectrometer (QE65 Pro, Ocean Optics) is utilized to capture optical spectra. The distributions of radiative recom- increases (Fig. 4). The current for maximum EQE of red μ 2 μ bination for flip-chip type mini-LEDs are measured by the reaches 30 000 A (150 A/cm ), far higher than the 900 A (4.5 A/cm2) for green and 300 μA(1.5A/cm2) for blue. The microscopic hyperspectral imaging system, which consists of a hyperspectral camera (GaiaField-F-V10, Shuanglihepu Inc., maximum EQE of red mini-LED at 380 K drop to 44% of that at 300 K, whereas the ratios are 87% for green and 93% for China) and a high-magnification metallographic microscope (MJ51, Mingmei Inc., China). blue [Fig. 4(d)]. The intensive decay of EQE with temperature for red mini-LED originates from the carrier loss as revealed by nideality (Fig. 3). III. RESULTS AND DISCUSSION The emission spectrum, which determines the chromaticity A. Temperature-Dependent L–I–V Characteristics coordinates, could be featured by dominant wavelength and I–V curves of RGB mini-LEDs at the temperature rang- full width at half maximum (FWHM). Due to the asym- ing from 300 to 380 K are illustrated in Fig. 2(a).The metric shape of emission spectra, we use centroid emission shifts of I–V curves with increasing temperature are similar wavelength to evaluate the variation of emission drifting at between green and blue mini-LEDs, both weaker than that different temperature and driving current (Fig.
Load more

Recommended publications
  • An Evaluation of Color Differences Across Different Devices Craitishia Lewis Clemson University, [email protected]
    Clemson University TigerPrints All Theses Theses 12-2013 What You See Isn't Always What You Get: An Evaluation of Color Differences Across Different Devices Craitishia Lewis Clemson University, [email protected] Follow this and additional works at: https://tigerprints.clemson.edu/all_theses Part of the Communication Commons Recommended Citation Lewis, Craitishia, "What You See Isn't Always What You Get: An Evaluation of Color Differences Across Different Devices" (2013). All Theses. 1808. https://tigerprints.clemson.edu/all_theses/1808 This Thesis is brought to you for free and open access by the Theses at TigerPrints. It has been accepted for inclusion in All Theses by an authorized administrator of TigerPrints. For more information, please contact [email protected]. What You See Isn’t Always What You Get: An Evaluation of Color Differences Across Different Devices A Thesis Presented to The Graduate School of Clemson University In Partial Fulfillment Of the Requirements for the Degree Master of Science Graphic Communications By Craitishia Lewis December 2013 Accepted by: Dr. Samuel Ingram, Committee Chair Kern Cox Dr. Eric Weisenmiller Dr. Russell Purvis ABSTRACT The objective of this thesis was to examine color differences between different digital devices such as, phones, tablets, and monitors. New technology has always been the catalyst for growth and change within the printing industry. With gadgets like the iPhone and the iPad becoming increasingly more popular in the recent years, printers have yet another technological advancement to consider. Soft proofing strategies use color management technology that allows the client to view their proof on a monitor as a duplication of how the finished product will appear on a printed piece of paper.
    [Show full text]
  • Package 'Colorscience'
    Package ‘colorscience’ October 29, 2019 Type Package Title Color Science Methods and Data Version 1.0.8 Encoding UTF-8 Date 2019-10-29 Maintainer Glenn Davis <[email protected]> Description Methods and data for color science - color conversions by observer, illuminant, and gamma. Color matching functions and chromaticity diagrams. Color indices, color differences, and spectral data conversion/analysis. License GPL (>= 3) Depends R (>= 2.10), Hmisc, pracma, sp Enhances png LazyData yes Author Jose Gama [aut], Glenn Davis [aut, cre] Repository CRAN NeedsCompilation no Date/Publication 2019-10-29 18:40:02 UTC R topics documented: ASTM.D1925.YellownessIndex . .5 ASTM.E313.Whiteness . .6 ASTM.E313.YellownessIndex . .7 Berger59.Whiteness . .7 BVR2XYZ . .8 cccie31 . .9 cccie64 . 10 CCT2XYZ . 11 CentralsISCCNBS . 11 CheckColorLookup . 12 1 2 R topics documented: ChromaticAdaptation . 13 chromaticity.diagram . 14 chromaticity.diagram.color . 14 CIE.Whiteness . 15 CIE1931xy2CIE1960uv . 16 CIE1931xy2CIE1976uv . 17 CIE1931XYZ2CIE1931xyz . 18 CIE1931XYZ2CIE1960uv . 19 CIE1931XYZ2CIE1976uv . 20 CIE1960UCS2CIE1964 . 21 CIE1960UCS2xy . 22 CIE1976chroma . 23 CIE1976hueangle . 23 CIE1976uv2CIE1931xy . 24 CIE1976uv2CIE1960uv . 25 CIE1976uvSaturation . 26 CIELabtoDIN99 . 27 CIEluminanceY2NCSblackness . 28 CIETint . 28 ciexyz31 . 29 ciexyz64 . 30 CMY2CMYK . 31 CMY2RGB . 32 CMYK2CMY . 32 ColorBlockFromMunsell . 33 compuphaseDifferenceRGB . 34 conversionIlluminance . 35 conversionLuminance . 36 createIsoTempLinesTable . 37 daylightcomponents . 38 deltaE1976
    [Show full text]
  • Photometric Modelling for Efficient Lighting and Display Technologies
    Sinan G Sinan ENÇ PHOTOMETRIC MODELLING FOR PHOTOMETRIC MODELLING FOR EFFICIENT LIGHTING LIGHTING EFFICIENT FOR MODELLING PHOTOMETRIC EFFICIENT LIGHTING AND DISPLAY TECHNOLOGIES AND DISPLAY TECHNOLOGIES DISPLAY AND A MASTER’S THESIS By Sinan GENÇ December 2016 AGU 2016 ABDULLAH GÜL UNIVERSITY PHOTOMETRIC MODELLING FOR EFFICIENT LIGHTING AND DISPLAY TECHNOLOGIES A THESIS SUBMITTED TO THE DEPARTMENT OF ELECTRICAL AND COMPUTER ENGINEERING AND THE GRADUATE SCHOOL OF ENGINEERING AND SCIENCE OF ABDULLAH GÜL UNIVERSITY IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF MASTER OF SCIENCE By Sinan GENÇ December 2016 i SCIENTIFIC ETHICS COMPLIANCE I hereby declare that all information in this document has been obtained in accordance with academic rules and ethical conduct. I also declare that, as required by these rules and conduct, I have fully cited and referenced all materials and results that are not original to this work. Sinan GENÇ ii REGULATORY COMPLIANCE M.Sc. thesis titled “PHOTOMETRIC MODELLING FOR EFFICIENT LIGHTING AND DISPLAY TECHNOLOGIES” has been prepared in accordance with the Thesis Writing Guidelines of the Abdullah Gül University, Graduate School of Engineering & Science. Prepared By Advisor Sinan GENÇ Asst. Prof. Evren MUTLUGÜN Head of the Electrical and Computer Engineering Program Assoc. Prof. Vehbi Çağrı GÜNGÖR iii ACCEPTANCE AND APPROVAL M.Sc. thesis titled “PHOTOMETRIC MODELLING FOR EFFICIENT LIGHTING AND DISPLAY TECHNOLOGIES” and prepared by Sinan GENÇ has been accepted by the jury in the Electrical and Computer Engineering Graduate Program at Abdullah Gül University, Graduate School of Engineering & Science. 26/12/2016 (26/12/2016) JURY: Prof. Bülent YILMAZ :………………………………. Assoc. Prof. M. Serdar ÖNSES :……………………………… Asst.
    [Show full text]
  • Análise Sensorial (Sensory Analysis) 29-02-2012 by Goreti Botelho 1
    Análise Sensorial (Sensory analysis) 29-02-2012 INSTITUTO POLITÉCNICO DE COIMBRA INSTITUTO POLITÉCNICO DE COIMBRA ESCOLA SUPERIOR AGRÁRIA ESCOLA SUPERIOR AGRÁRIA LEAL LEAL Análise Sensorial Sensory analysis AULA T/P Nº 3 Lesson T/P Nº 3 SUMÁRIO: Summary Parte expositiva: Sistemas de medição de cor: diagrama de cromaticidade CIE, sistema de Theoretical part: Hunter e sistema de Munsell. Color Measurement Systems: CIE chromaticity diagram, Hunter system Parte prática: and Munsell system. Determinação de cores problema utilizando o diagrama de cromaticidade Practical part: CIE. Determination of a color problem by using the CIE chromaticity diagram. Utilização do colorímetro de refletância para determinação da cor de frutos. Use of the reflectance colorimeter to determine the color of fruits. Prova sensorial de dois sumos para compreensão da cor de um produto na Sensory taste of two juices to understand the color effect of a product in percepção sensorial. sensory perception. Goreti Botelho 1 Goreti Botelho 2 Why do we need devices to replace the human vision in the food industry? Limitações do olho humano • a) não é reprodutível – o mesmo alimento apresentado a vários provadores ou ao mesmo provador em momentos diferentes pode merecer qualificações diferentes. Este último fenómeno deve-se ao facto de que, em oposição à grande capacidade humana de apreciar diferenças, o homem não tem uma boa “memória da cor”, ou seja, é difícil recordar uma cor quando não a está a ver. • b) a nomenclatura é pouco concreta e até confusa. As expressões “verde muito claro” ou “amarelo intenso” não são suficientes para definir uma cor e muito menos para a reproduzir ou compará-la com outras quando não se dispõe do objecto que tem essa cor.
    [Show full text]
  • AMSA Meat Color Measurement Guidelines
    AMSA Meat Color Measurement Guidelines Revised December 2012 American Meat Science Association http://www.m eatscience.org AMSA Meat Color Measurement Guidelines Revised December 2012 American Meat Science Association 201 West Springfi eld Avenue, Suite 1202 Champaign, Illinois USA 61820 800-517-2672 [email protected] http://www.m eatscience.org iii CONTENTS Technical Writing Committee .................................................................................................................... v Preface ..............................................................................................................................................................vi Section I: Introduction ................................................................................................................................. 1 Section II: Myoglobin Chemistry ............................................................................................................... 3 A. Fundamental Myoglobin Chemistry ................................................................................................................ 3 B. Dynamics of Myoglobin Redox Form Interconversions ........................................................................... 3 C. Visual, Practical Meat Color Versus Actual Pigment Chemistry ........................................................... 5 D. Factors Affecting Meat Color ............................................................................................................................... 6 E. Muscle
    [Show full text]
  • Using Deltae* to Determine Which Colors Are Compatible
    Dissertations and Theses 5-29-2011 The Distance between Colors; Using DeltaE* to Determine Which Colors Are Compatible Rosandra N. Abeyta Embry-Riddle Aeronautical University - Daytona Beach Follow this and additional works at: https://commons.erau.edu/edt Part of the Other Psychology Commons Scholarly Commons Citation Abeyta, Rosandra N., "The Distance between Colors; Using DeltaE* to Determine Which Colors Are Compatible" (2011). Dissertations and Theses. 9. https://commons.erau.edu/edt/9 This Thesis - Open Access is brought to you for free and open access by Scholarly Commons. It has been accepted for inclusion in Dissertations and Theses by an authorized administrator of Scholarly Commons. For more information, please contact [email protected]. Running Head: THE DISTANCE BETWEEN COLORS AND COMPATABILITY The distance between colors; using ∆E* to determine which colors are compatible. By Rosandra N. Abeyta A Thesis Submitted to the Department of Human Factors & Systems in Partial Fulfillment of the Requirements for the Degree of Master of Science in Human Factors & Systems Embry-Riddle Aeronautical University Daytona Beach, Florida May 29, 2011 Running Head: THE DISTANCE BETWEEN COLORS AND COMPATABILITY 2 Running Head: THE DISTANCE BETWEEN COLORS AND COMPATABILITY 3 Abstract The focus of this study was to identify colors that can be easily distinguished from one another by normal color vision and slightly deficient color vision observers, and then test those colors to determine the significance of color separation as an indicator of color discriminability for both types of participants. There were 14 color normal and 9 color deficient individuals whose level of color deficiency were determined using standard diagnostic tests.
    [Show full text]
  • Digital Color Processing
    Lecture 6 in Computerized Image Analysis Digital Color Processing Lecture 6 in Computerized Image Analysis Digital Color Processing Hamid Sarve [email protected] Reading instructions: Chapter 6 The slides 1 Lecture 6 in Computerized Image Analysis Digital Color Processing Electromagnetic Radiation Visible light (for humans) is electromagnetic radiation with wavelengths in the approximate interval of 380- 780 nm Gamma Xrays UV IR μWaves TV Radio 0.001 nm 10 nm 0.01 m VISIBLE LIGHT 400 nm 500 nm 600 nm 700 nm 2 2 Lecture 6 in Computerized Image Analysis Digital Color Processing Light Properties Illumination Achromatic light - “White” or uncolored light that contains all visual wavelengths in a “complete mix”. Chromatic light - Colored light. Monochromatic light - A single wavelength, e.g., a laser. Reflection No color that we “see” consists of only one wavelength The dominating wavelength reflected by an object decides the “color tone” or hue. If many wavelengths are reflected in equal amounts, an object appears gray. 3 3 Lecture 6 in Computerized Image Analysis Digital Color Processing The Human Eye Rods and Cones rods (stavar och tappar) only rods cone mostly cones only rods optical nerves 4 4 Lecture 6 in Computerized Image Analysis Digital Color Processing The Rods Approx. 100 million rod cells per eye Light-sensitive receptors Used for night-vision Not used for color-vision! Rods have a slower response time compared to cones, i.e. the frequency of its temporal sampling is lower 5 5 Lecture 6 in Computerized Image Analysis Digital Color
    [Show full text]
  • CIE 1931 Color Space
    CIE 1931 color space From Wikipedia, the free encyclopedia In the study of the perception of color, one of the first mathematically defined color spaces was the CIE 1931 XYZ color space, created by the International Commission on Illumination (CIE) in 1931. The CIE XYZ color space was derived from a series of experiments done in the late 1920s by W. David Wright and John Guild. Their experimental results were combined into the specification of the CIE RGB color space, from which the CIE XYZ color space was derived. Tristimulus values The human eye has photoreceptors (called cone cells) for medium- and high-brightness color vision, with sensitivity peaks in short (S, 420–440 nm), middle (M, 530–540 nm), and long (L, 560–580 nm) wavelengths (there is also the low-brightness monochromatic "night-vision" receptor, called rod cell, with peak sensitivity at 490-495 nm). Thus, in principle, three parameters describe a color sensation. The tristimulus values of a color are the amounts of three primary colors in a three-component additive color model needed to match that test color. The tristimulus values are most often given in the CIE 1931 color space, in which they are denoted X, Y, and Z. Any specific method for associating tristimulus values with each color is called a color space. CIE XYZ, one of many such spaces, is a commonly used standard, and serves as the basis from which many other color spaces are defined. The CIE standard observer In the CIE XYZ color space, the tristimulus values are not the S, M, and L responses of the human eye, but rather a set of tristimulus values called X, Y, and Z, which are roughly red, green and blue, respectively.
    [Show full text]
  • Colors by Carl Reynolds
    Colors by Carl Reynolds “Color is an immensely complex subject, one that draws on concepts and results from physics, physiology, psychology, art, and graphic design. The color of an object depends not only on the object itself, but also on the light source illuminating it, on the color of the surrounding area, and on the human vision system.” ! Computer Graphics Principles and Practice ! — Foley & van Dam1 We were all taught in school that the primary colors are red, yellow, and blue. This statement implies, all colors can be created from mixing various amounts of red, yellow, and/or blue. This is wrong. Red, yellow, and blue are not the primary colors. Neither are red, green, and blue; or cyan, magenta, and yellow. Each of these is a set of primary colors, but no finite set of colors can be used to create all the colors visible to the human eye. It might be better to call these a color space, instead of primary colors. It is possible to create all the colors within the red-yellow-blue space, by using various amounts of red, yellow, and/or blue, but there are colors outside this space that are visible to the human eye. Figure 1. Depending on what you’re doing, you might want to use one, or another color space. For example, most painters use red, yellow, and blue, along with black, and white. If you’re printing color magazines, or books you’ll probably use cyan, magenta, yellow, and black to do your designs. Many computer graphics artists design their work using red, green, and blue.
    [Show full text]
  • Going Beyond the Limit of an LCD's Color Gamut
    Light: Science & Applications (2017) 6, e17043; doi:10.1038/lsa.2017.43 OPEN Official journal of the CIOMP 2047-7538/17 www.nature.com/lsa ORIGINAL ARTICLE Going beyond the limit of an LCD’s color gamut Hai-Wei Chen1, Rui-Dong Zhu1, Juan He1, Wei Duan2, Wei Hu2, Yan-Qing Lu2, Ming-Chun Li3, Seok-Lyul Lee3, Ya-Jie Dong1,4 and Shin-Tson Wu1 In this study, we analyze how a backlight’s peak wavelength, full-width at half-maximum (FWHM), and color filters affect the color gamut of a liquid crystal display (LCD) device and establish a theoretical limit, even if the FWHM approaches 1 nm. To overcome this limit, we propose a new backlight system incorporating a functional reflective polarizer and a patterned half-wave plate to decouple the polarization states of the blue light and the green/red lights. As a result, the crosstalk between three pri- mary colors is greatly suppressed, and the color gamut is significantly widened. In the experiment, we prepare a white-light source using a blue light-emitting diode (LED) to pump green perovskite polymer film and red quantum dots and demonstrate an exceedingly large color gamut (95.8% Rec. 2020 in Commission internationale de l'éclairage (CIE) 1931 color space and 97.3% Rec. 2020 in CIE 1976 color space) with commercial high-efficiency color filters. These results are beyond the color gamut limit achievable by a conventional LCD. Our design works equally well for other light sources, such as a 2-phosphor- converted white LED. Light: Science & Applications (2017) 6, e17043; doi:10.1038/lsa.2017.43; published online 8 September 2017 Keywords: color gamut; liquid crystal displays; perovskite; polarization; quantum dot INTRODUCTION light efficiency loss is hardly acceptable.
    [Show full text]
  • Title Precise Color Control of Red-Green-Blue Light
    Precise Color Control of Red-Green-Blue Light-Emitting Diode Title Systems Author(s) Chen, H; Tan, SC; Lee, TLA; Lin, D; Hui, SYR IEEE Transactions on Power Electronics, 2017, v. 32 n. 4, p. Citation 3063-3074 Issued Date 2017 URL http://hdl.handle.net/10722/238653 IEEE Transactions on Power Electronics. Copyright © Institute of Electrical and Electronics Engineers.; ©20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or Rights promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.; This work is licensed under a Creative Commons Attribution-NonCommercial- NoDerivatives 4.0 International License. This article has been accepted for publication in a future issue of this journal, but has not been fully edited. Content may change prior to final publication. Citation information: DOI 10.1109/TPEL.2016.2581828, IEEE Transactions on Power Electronics 1 Precise Color Control of Red-Green-Blue Light- Emitting Diode Systems Huan-Ting Chen, Siew-Chong Tan, Senior Member, Albert. T. L. Lee, Member, IEEE, De-Yan Lin , Member, IEEE, IEEE, S. Y. (Ron) Hui, Fellow, IEEE Abstract—The complex nature and differences of the A typical RGB LED system usually requires each type of luminous and thermal characteristics of red, green and blue LED to be driven by either a dedicated LED driver or one (RGB) light-emitting diodes (LEDs) make precise color channel of a multichannel LED driver.
    [Show full text]
  • Investigation of the Academy's Image Interchange Framework At
    Investigation of the Academy’s Image Interchange Framework at RIT Christopher J. Clark Rochester Institute of Technology — May 21st, 2010 Abstract. Students of the Rochester Institute of Technology’s School of Film and Animation produce hundreds of films each year. The focus of their studies is mainly on its story, direction, and editing. Managing what exactly happens to their scene from when they set up the lights on day one to the day the film screens in the Carlson Auditorium is the focus of this paper. There is often an assumption of ”what you see is what you get” when it comes to student filmmaking. However, there is an enormous amount of image processing that occurs within the camera on set, the equipment used during post-production, and the projector at final exhibition. Often this produces unwanted or unexpected results. The solution to this problem is to develop a color management framework as a basis on which students can properly manage the “final look” and maintain the creative intent of their projects. When film is exposed, processed, printed, and projected, the reproduction of real world color and contrast is not perfectly accurate. It is, however, how people seem to prefer to see the world. Across the world, people will most often prefer the “film look,” one that has been tweaked for decades by Kodak and other companies.1 The question becomes whether people enjoy this look for habitual reasons, or if it is truly the most pleasing to the eye. Because film is a subtractive system consisting of cyan, magenta, and yellow dyes, achieving that look with a red-green-blue additive system such as digital capture is a challenge.
    [Show full text]