Flexco.Com Table of Contents

Total Page:16

File Type:pdf, Size:1020Kb

Flexco.Com Table of Contents Product Handbook Conveyor Belt Splicing Systems January 2018 2525 Wisconsin Avenue, Downers Grove, Illinois 60515 Phone: 1-630-971-0150 Fax: 1-630-971-1180 Customer Service: 1-800-541-8028 www.flexco.com Table of Contents CLIPPER® WIRE HOOKS .................................................................................................................................... 4-19 Clipper® Wire Hook Fastening System Overview ...................................................................4 General Hook Information .......................................................................................................5 Clipper Hook and Pin Selection Chart .....................................................................................6 Clipper Carded Hooks .......................................................................................................... 7-14 Unibar® Hooks ....................................................................................................................15-16 Hinge Pins .......................................................................................................................... 17-19 CLIPPER® G SERIES™ LACING ........................................................................................................................ 20-28 Clipper® G Series™ Lacing Overview .....................................................................................20 Clipper® G Series™ Lacing .......................................................................................................21 Clipper® Maintenance Lacers ............................................................................................22-24 Clipper® Specialty Lacers .......................................................................................................25 Clipper® Production Lacers ...............................................................................................26-28 CLIPPER® LAUNDRY PATCH FASTENER ........................................................................................................ 29-31 Clipper® Laundry Patch Fastener Overview ..........................................................................29 Patch Fasteners, Production Lacers .................................................................................30-31 ALLIGATOR® CONVEYOR BELT LACING ....................................................................................................... 32-35 Alligator® Lacing Fastening System Overview .....................................................................32 Steel Lacing .............................................................................................................................33 316 Stainless Lacing ...............................................................................................................34 Hinge Pins ...............................................................................................................................35 ALLIGATOR® TRANSMISSION BELT LACING .................................................................................................... 36 ALLIGATOR® READY SET™ STAPLE BELT FASTENERS ................................................................................. 37-41 Alligator® Ready Set Fastening System Overview ...............................................................37 No. 62, No. 125, No. 187 Staple Fasteners ...........................................................................38 Hinge Pins ...............................................................................................................................39 Installation Tools ................................................................................................................40-41 MegAlloy® Staple Fasteners ...................................................................................................41 ALLIGATOR® RIVET FASTENERS ................................................................................................................... 42-44 Alligator® Rivet Fastening System Overview ........................................................................42 Rivet Fasteners, Hinge Pins, Installation Tools ................................................................43-44 ALLIGATOR® NON-METALLIC FASTENERS ................................................................................................... 45-47 Alligator® Non-Metallic Fastening System Overview...........................................................45 Fasteners, Hinge Pins .............................................................................................................46 Installation Tools ................................................................................................................46-47 Spiral Lacing ...........................................................................................................................47 ALLIGATOR® V-BELT FASTENERS .................................................................................................................. 48-49 Alligator® V-Belt Fastening System Overview ......................................................................48 Fasteners, Tools .......................................................................................................................49 LIGHT-DUTY BELT MAINTENANCE TOOLS .................................................................................................. 50-51 BELT FABRICATION TOOLS ............................................................................................................................ 52-56 Novitool® Overview.................................................................................................................52 Aero® Splice Press...................................................................................................................53 Aero® 300 Splice Press ...........................................................................................................54 Amigo™ Monolithic Press .......................................................................................................55 Ply130™ Separator ..................................................................................................................56 PunM™ Punch Press ................................................................................................................56 2 www.flexco.com • phone: 1-630-971-0150 PRODUCT HANDBOOK Table of Contents (cont.) FGP FOOD GRADE PRECLEANER ................................................................................................................. 57-59 FGP Food Grade Precleaner Overview..................................................................................57 FGP Food Grade Precleaner ...................................................................................................58 FGP Food Grade Precleaner Replacement Parts ..................................................................59 LIGHT-DUTY TRANSFER SOLUTIONS ........................................................................................................... 60-63 Transfer Solutions Overview .................................................................................................60 Hitch Guards............................................................................................................................61 Segmented Transfer Plates ................................................................................................62-63 TATCH-A-CLEAT® BELT CLEATS ..................................................................................................................... 64-67 General Cleat Information ......................................................................................................64 Mechanical Cleats ..............................................................................................................65-66 Bondable Cleats ......................................................................................................................67 FLEXCO® BOLT HINGED FASTENERS ............................................................................................................ 68-73 Flexco® Bolt Hinged Fastening System Overview ................................................................68 No. 375X Fasteners .................................................................................................................69 No. 550 .....................................................................................................................................70 Hinge Pins ...............................................................................................................................71 Installation Tools ................................................................................................................72-73 FLEXCO® RIVET HINGED FASTENERS .......................................................................................................... 74-86 Flexco® Rivet Hinged Fastening System Overview .............................................................. 74 Flexco® R2 Medium-Duty Rivet Hinged Fasteners ...............................................................75 Fasteners ............................................................................................................................76-77 Rivets, Hinge Pins ..............................................................................................................78-82
Recommended publications
  • Louisville Assembly Plant Uniform Program Catalog
    LOUISVILLE ASSEMBLY PLANT UNIFORM PROGRAM CATALOG A UN ERIC ITED M A A U F T O O S M R O E K B I R L E O , A W E T R O N E S P M A E C L E P A M I N L D A A R G U T R L I C U LONG SLEEVE T-SHIRTS Long Sleeve T-Shirt (No Pocket)* Item #: 10321LV 5.4 oz. 100% cotton jersey fabric; double-needle bottom hem with long sleeve knit cuffs; tapered shoulder seam, Union Made in 10321LV USA. Black and Navy: S - XL $16.67 2XL $20.14 3XL $22.92 4XL $25.69 5XL $28.47 Ash: S - XL $14.28 2XL $17.75 3XL $20.53 4XL $23.31 5XL $26.08 Long Sleeve T-Shirt (With Pocket)* Item #: 10322LV 5.4 oz. 100% cotton jersey fabric; double-needle bottom hem with long sleeve knit cuffs; 5-point left chest pocket; tapered shoulder seam, Union Made in USA. Black and Navy: S - XL $18.31 10322LV 2XL $21.78 3XL $24.56 4XL $27.33 5XL $30.11 Ash: S - XL $15.97 2XL $19.44 3XL $22.22 4XL $25.00 5XL $27.78 *Garments will be embellished with the Louisville Assembly Plant logo. Logo depends on dark or light garment. Decorated garments can not be returned.* 2 SHORT SLEEVE T-SHIRTS 10221LV Short Sleeve Heavyweight T-Shirt (No Pocket)* Item #: 10221LV 6.2 oz. 100% cotton jersey fabric; taped shoulder seam; Union Made in USA.
    [Show full text]
  • Elejq . 5W4” \/ Inventor
    Jan. 29, 1963 ' C..RUBIO 3,075,202 PIN COLLAR STAYS Filed June 13, 1955 8 , \ / 7 3 .ELEJQ . 5W4” \/ INVENTOR. 5. [40 I5 4 Carlos Ruble 3,b75,2d2 United States Patent 0 " 1C6 Patented Jan. 29, 1353 1 2 FIGURE 7 is a plan view showing a modi?ed form of 3,075,202 angular adjustable stay for collars. PIN COLLAR STAYS FIGURE 8 is a plan view showing a modi?ed form of Carlos Rubin, 126 E. 83rd St, New York, N.Y. cross adjustable collar stay, according to the invention. Filed June 13, 1955, Ser. No. 514,840 FIGURE 9 is a plan view showing another modi?ed 2 Claims. (El. 2-132) form of collar stay with unitary main body construction. FIGURE 10 is a front elevational view of the collar This invention relates to improvements in devices for stay shown in FIGURE 9. staying and smoothing shirt collars and the like. FIGURE 11 is a right end-elevational View of the collar An object of the invention is to provide a novel and im stay shown in FIGURE 9. proved shirt collar stay which is carried by the collar in FIGURE 12 is a plan view showing another modi?ed order to retain the collar in unwrinkled form, and with a form of quadrilateral stay of a type suitable for collars smooth attractive appearance. also. ' Another object of the invention is to provide a novel The presently disclosed devices are convenient for main and improved shirt collar stay which may be employed on 15 taining the most attractive and uniform appearance de any type of shirt collar, whether or not it is equipped sired in connection with the wearing of shirt collars.
    [Show full text]
  • Precision Tools
    Precision Tools Precision Tools Gear Cutting Tools & Broaches Pursuing advanced high-speed technology that is both user and environmentally friendly Since developing Japan's first broaching machine in the late 1920s, Fujikoshi has developed a variety of tools and machine tools to handle advancements in production systems. Fujikoshi continues to lead the way by developing machining systems that integrate tools and machines. Pursuing advanced high-speed technology that is both user and environmentally friendly Since developing Japan's first broaching machine in the late 1920s, Fujikoshi has developed a variety of tools and machine tools to handle advancements in production systems. Fujikoshi continues to lead the way by developing machining systems that integrate tools and machines. ndex Gear Cutting Tools Gear Cutting Comparison and Types 25 Broaches Design of Broach ools Guidance NACHI Accuracy of Gear Shaper Cutters 26 Technical Introduction Basic Design and Cutting Method 61 Materials and Coating of Gear Cutting Tools 5 Cutting Condition and Regrinding 27 Hard Broaches 45 Calculation of Pulling Load 62 Gear Cutting T Disk Type Shaper Cutters Type1Standard Dimensions 28 Broach for MQL 46 Face Angle and Relief Angle 63 Technical Introduction Disk Type Shaper Cutters Type2Standard Dimensions 30 Off-normal Gullet Helical Broach 47 Finished Size of Broaches 64 Hard Hobbing 6 Disk Type Shaper Cutters Type2Standard Dimensions 31 Micro Module Broaching 48 Helical Gear Shaper Cutters High Speed Dry Hobbing 7 Essential Points and Notice 65 Disk
    [Show full text]
  • Sew on Flat and Shank Buttons By: Burdastyle
    Sew on Flat and Shank Buttons By: BurdaStyle http://www.burdastyle.com/techniques/sew-on-flat-and-shank-buttons Whether you lost a button from your favorite coat or you are sewing a new blouse from your favorite BurdaStyle pattern, sewing on a button is a skill you can master quickly and can easily be learned! Step 1 Your materials: needle, thread (button and carpet, upholstery, or topstitch thread is better because it is thicker), a pin or toothpick, buttons, scissors. Optional: for shank buttons, you can use a small flat button (either clear or to match the fabric) to make the shank button more stable 1SewStep 2 Thread the needle and knot one end of the thread. Decide where your button will be placed, and pull the needle through from the wrong side to the right side, so the knotted end is on the wrong side. Make two to three stitches in this place to anchor the thread. Place the button on top of these stitches. Step 3 Bring the needle up through the button, from the back side. 2Step 4 Lay the pin or toothpick over the button. This will be used as a spacer. Step 5 Take the thread over the spacer and back through the opposite buttonhole. Repeat about 6 times. For a 4-hole button, repeat these steps for the other two holes. 3Step 6 Bring the needle and thread to the back and knot and trim the thread. Remove the straight pin. Now you've sewn on your flat button! Step 7 To attach a button with a shank, begin with steps 1 and 2.
    [Show full text]
  • Buttons & Buttonholes
    CT-MMB.189 BUTTONS & BUTTONHOLES BUTTONS Selection Button selection depends on the type and style Buttons can be fascinating, functional, and of the garment. Buttons should be selected fashionable. They are fascinating because of their BEFORE making buttonholes or button loops. many sizes, shapes, colors, and designs. They are Consider the following when making your functional because they are one of the major selection: methods of opening and closing garments. Buttons are fashionable because they also decorate and $ The pattern will have a suggested size which enhance apparel & other items. was determined as the pattern was being made. If the button size is changed, so must the size of the button and buttonhole placket. $ Weight of fabric B Heavy fabric needs heavier and larger buttons; lighter fabric needs lighter and smaller buttons. $ Fabric design B Buttons can blend with the History fabric OR they can call attention to the area. The term is from the French word, bouton, To call attention to the area use solid colored meaning a round object. Since the 13th century, buttons on prints and patterned buttons on buttons have been used as fasteners. Before that, solid color fabrics. they were used more for their decorative and symbolic value. Today, buttons continue to be used as decoration, but their placement once served a useful purpose. For instance buttons on the back of men’s coats served as a way to fasten coat tails up out of the $ Use a smooth, flat-textured button on smooth way when riding on horseback. During Frederick textured fabrics. Shiny buttons are best on the Great=s reign, it was customary for three decorative, shiny fabrics.
    [Show full text]
  • 2021 Product Catalog
    Looking for more? Contact Us 4270 Ivy Pointe Blvd. Phone: 800.543.4596 Cincinnati, OH 45245 Fax: 800.543.3299 FUSION TECHNOLOGY Feel, speed, and power of a true Visit Us pneumatic, with no ramp up time On the web for more information between shots SENCO.com F-35XP & F-35FRHXP F-35XP REFILLABLE AIR PORT Simplifies tool repair and maintenance Find Us to reduce downtime Search for your closest SENCO dealer SENCO.com/dealer-locator ONBOARD STATUS INDICATOR Built-in battery power level, battery Join Us recharge, and nail-jam notification between shots Join our loyalty & rewards program SENCOPROteam.com SELECTABLE ACTUATION SWITCH Quickly and safely change from Watch Us sequential to bump-fire mode between shots Check out all of our latest videos & product launches YouTube.com/SencoBrands AGGRESSIVE TOENAIL SAFETY Extra grip for consistent nail placement Follow Us on toenail applications between shots On Twitter & Facebook for the latest SENCO news @SENCOBrands RUGGED RAFTERHOOK Oversized aluminum design rotates into place to secure tool when not in use MAKING HARD WORK EASIER 2021 PRODUCT CATALOG Item #MK336 Rev. 2 ©2021 KYOCERA SENCO Industrial Tools, Inc. FINISH & WOODWORKING ROOFING, SIDING & FENCING F-18XP F-16XP F-15 F-LXP FinishPro23SXP FinishPro23LXP FinishPro21LXP LS1XP FinishPro18Mg RoofPro445XP SCN49XP PS15RXP BC58 Cap A11 Hammer Stapler 10M0001N 10N00001N 10L00001N 10Y00001N 8F0001N 8L0001N 8M0001N 8N0001N 1U0021N 8V0001N 5J0001N 9U0001N 4A0001N PC0700 REFERENCE Pg. 15 Pg. 15 Pg. 15 Pg. 15 Pg. 16 Pg. 16 Pg. 17 Pg. 17 Pg. 17 Pg. 49 Pg. 49 Pg. 50 Pg. 50 Pg. 50 FinishPro18BMg SLP20XP FinishPro25XP FinishPro16XP FinishPro30XP FinishPro35Mg FinishPro42XP Fasteners: see pages 51–53 9B0001N 430101N 760102N 9S0001N 9P0002N 6G0001N 4G0001N PALLETS & CRATING PalletPro57FXP PalletPro100XP PalletPro130XP DFPXP F75LXP F75SXP 4L0001N 5L0001N 5M0001N 8H0001N 8J0002N 8J0001N Pg.
    [Show full text]
  • Sewing Basics - Know Your Needles by Nancy Fiedler
    Sewing Basics - Know Your Needles By Nancy Fiedler Whether you have a top-of-the-line sewing machine or an economy model, the most important tool used is the sewing machine needle. The sewing life of a needle is 8 hours. In that time, the point will become worn and stitch quality may become compromised. Keep a variety of needles on-hand to change regularly. A good rule of thumb is to use a new needle at the start of every project. The type and size of needle to use is determined by: • Thread type: polyester, cotton, rayon or metallic • Thread weight: 12wt, 30wt, 40wt, 60wt, 90wt (The higher the number, the finer the thread.) • Fabric type: knit, woven, densely woven, specialty • Technique: general sewing, embroidery, embellishing or quilting Take a look at the anatomy of a needle: www.janome.com Page 1 Sewing Basics - Know Your Needles A sewing machine needle is made of six parts: 1. The Shank is the upper portion of the needle, which is inserted into the sewing machine. The shank on a needle for domestic sewing has a flat back. This needle system is indicated on some packaging by these notations: HA x 1, 15 x 1 or 130/705. 2. The Shaft is the entire lower portion of the needle. The size of the needle is determined by the diameter of the shaft. The smaller the number, the smaller the shaft will be. The eye will increase in size proportionately to the size of the shaft. 3. The Groove is on the front of the needle.
    [Show full text]
  • Ruler Foot & Template Size Guide
    RULER FOOT & TEMPLATE SIZE GUIDE: FOOT & TEMPLATE THICKNESS: To determine your shank size all you need to do is lower your foot and then measure the height of the center of the hole for the screw from the needle plate. We offer 4 Different Foot styles and 2 different thicknesses of templates for Domestic machines based on shank height. OTHER SIZES AVAILABLE INCLUDE: Medium Shank Ruler Foot: • Bernina 7 Series and 8 Series machines benefit from a MS foot as it allows the foot to sit lower to the plate and helps remove the hop. • Pfaff Machines using the Spring Free Motion Setting: Creative Sensation Pro, Creative Sensation, Creative Vision, Creative Performance, Creative 4.5, 4.0, 3.0, 2.0, Performance 5.0, Quilt Expression 4.2, 4.0, Expression 3.5, 3.2, 3.0, 2.0, Expression 150. High Shank Special Foot: • Brother PQ1300 PQ1300 PQ1500S • Babylock BLQP BL500A • Janome 1600P 1600P-DB 1600-QC • JUKI DDL-227 DDL-555 DDL-8700 TL-98E TL-98P TL-98QE TL2000Qi TL2010 • Pfaff 1200 Grand Quilter • Husqvarna Mega Quilter • Singer 2OU 31-15 Ruler Foot Size Guide by Manufacturer (subject to change): Bernina – All low shank with #77 shank adapter (*** 8 series and 7 series which we recommend a Mid Shank foot see above) Babylock – Most low shank except (High Shank- Ellageo, Aria, Crescendo, Destiny, Unity, Journey and see HSS list) Brother – Most low shank except (High shank - VE2200, VQ3000, VM5100, VQ2400, VM6200, XV8500D, and see HSS list) Janome - A good mix of high and low shank (Recommend using a the measurement test) Juki – Most Low Shank (see
    [Show full text]
  • For Men & Women
    MAKING Click on any image to go to the related material for Men & Women Keyhole Buttonholes Project-Garment Galleries the DVD Video Demos Printable Patterns All content © 2009 by David Page Coffin RTW & Custom Galleries Sources & Links Click Here to launch DPC’s blog for more info about using this DVD Click this symbol to return to this page Click this symbol to go to next page 1 BONUS CHAPTER Using an Eyelet Plate to Make Keyhole Buttonholes Eyelet Plates and Cutters Keyhole buttonholes are designed to An eyelet plate, shown in photos 1 and 2, covers prevent distortion when the closure is your feed dogs and provides a post on which under strain during wear. Without the ex- to position the precut hole for your keyhole, tra space provided by the keyhole shape, plus a slot that allows the needle to make a zig- 2 an ordinary buttonhole will be distorted zag stitch. The post is slotted, too, so the needle as the shank pulls against the end of the can swing inside it to form the inner edge of the hole. On pants, I’d suggest using key- eyelet (photo 3). The black plastic plate in photo holes for any and all buttonholes, wheth- 2 (sitting on top of my Bernina plate) is from my er on button flies, pocket flaps, or waist dear old Pfaff; notice that its slot is oriented in closures. I only recently got a sewing the opposite direction compared to the Bernina machine that could make keyhole but- plate (this apparently makes no difference), and tonholes, but I had already developed a that it has “toes” designed to snap into the feed- way of making keyhole buttonholes with dog holes on the machine, instead of screwing an eyelet plate.
    [Show full text]
  • Fashion and Textile Technology Textile Construction Techniques
    Fashion and Textile Technology Textile Construction Techniques This edition: April 2018 (version 1.0) © Scottish Qualifications Authority 2018 Fashion and Textile Technology — Textile Construction Techniques Throughout the Fashion and Textile Technology courses, candidates will develop the skills required to carry out a range of textile construction techniques. This document is for the use of candidates and teachers, and lists a range of textile construction techniques that candidates may use in the items they make. The range of techniques included in this document is for guidance only and is not definitive. Candidates may choose to use any other suitable construction technique(s) to make their item. Using this document The construction techniques are grouped into sections according to the function they carry out in the item, eg pockets. Some construction techniques may have more than one function, but to avoid duplication of information, each technique is only listed once, eg in the hand sewing and embellishment sections, some of the hand sewing stitches may also be used as decorative techniques. For each construction technique listed, the following information is provided: Construction techniques The name of each construction technique is given. Some commercial publications may use different names for what appears to be the same technique, but for the purposes of this document the most commonly used names have been used. Definition An explanation of each construction technique is provided. This is a definitive description of the technique named, and may give a range of variations where appropriate. Some definitions include a description of some of the stages of construction, but where these are incorporated, they are to help clarify the technique and are not intended as instructions for executing the process.
    [Show full text]
  • The Tennessee Highway Patrol (THP)
    Specifications for Tennessee Highway Patrol (THP) Uniforms PURPOSE: The Tennessee Highway Patrol (THP), a Division within the Tennessee Department of Safety and Homeland Security (TDOSHS), is seeking to establish a new five (5) year contract to provide uniforms for commissioned personnel. CONTRACTOR REQUIREMENTS: The Contractor shall certify that all items furnished shall conform to the specifications, and shall replace all items that fail to meet the requirements of these specifications at no additional costs to the State. Shirts, Long Sleeve, Male, Dept. of Safety and Homeland Security, Uniform MATERIAL: FABRIC USED SHALL BE BURLINGTON RAEFORD BRAND. STYLE/COLOR: 1571-05460, 8 ½ oz. SUN TAN TROPICAL, 55% DACRON POLYESTER/45% WOOL. ALL MATERIAL TO BE KAUMOGRAPHED TO SIGNIFY RAEFORD AUTHENTICITY ON ALL RAEFORD FABRICS. SHOULDER STRAPS AND POCKET FLAPS TO BE BURLINGTON RAEFORD BRAND, STYLE # 1571-09338, 8-81/2oz, FORESTRY GREEN TROPICAL, 55% DACRON POLYESTER/45% WOOL. EACH GARMENT MUST BEAR A CLOTH LABEL PATCH WHICH GUARANTEES THAT THE FABRIC IS BURLINGTON RAEFORD BRAND STYLE: SHIRT SHALL HAVE PLACKET FRONT, DRESS TAIL, FULL CUT TAPERED FIT, BANDED COLLAR AND LONG SLEEVES WITH BARREL CUFFS. TWO PLEATED BREAST POCKETS WITH CONTRASTING SCALLOPED FLAPS AND SHOULDER STRAPS. FULL BADGE REINFORCEMENT. MATCHING INSIDE YOKE OF HIGH LUSTER POLY TWILL. SHIRTS SHALL BE SHAPED AT SIDE SEAMS. LENGTH OF SHIRT SHALL BE MINIMUM 33” FOR SIZE 16.5, MEASURED AT THE BACK FROM THE BOTTOM OF THE COLLAR TO THE BOTTOM OF THE SHIRT, THEN GRADUATE 1/8” PER NECK SIZE. CHEST: 50”, WAIST: 47-1/2”, GRADUATION: 2” ON EACH POINT OF MEASUREMENT.
    [Show full text]
  • Sewing Basics - Sewing Bulky Seams by Nancy Fiedler
    Sewing Basics - Sewing Bulky Seams By Nancy Fiedler You may have noticed the little black button that is on Zigzag Foot A that comes with many Janome machines and wondered what is the purpose? This is the leveling button that will allow you to start at the edge of thick fabrics and even hem jeans! It is so simple to use, follow the steps below: 1. Place thick layers of fabric under the foot or stop sewing, needle down, when the front of the foot lifts higher than the back. 2. Lift the foot, gently push on front of the foot to make it level, then push the button in to lock it into posiiton. www.janome.com Page 1 Sewing Basics - Sewing Bulky Seams 3. While holding the button, lower the presser foot. The foot will stay level. Tip: Use the knee lift to raise and lower the foot. 4. Start sewing. The button will automatically release when the foot comes off the hump. 5. Continue sewing. Use this little trick any time you have a seam which causes the foot to slightly lift in front of the needle. If this foot is not available for your machine, purchase the Button Shank Plate. 1. Place the plate behind and under the foot to lift the foot to the same height as the bulky seam. Lower the presser foot. The foot will now sit level. www.janome.com Page 2 Sewing Basics - Sewing Bulky Seams 2. Start sewing; remove the plate once the foot is fully on the fabric. www.janome.com Page 3.
    [Show full text]