Appliance Manager Operator's Guide
Total Page:16
File Type:pdf, Size:1020Kb
Silver Peak Appliance Manager Operator’s Guide VXOA 8.0 May 2016 PN 200030-001 Rev Q Silver Peak Appliance Manager Operator’s Guide Silver Peak Appliance Manager Operator’s Guide Document PN 200030-001 Rev Q Date: May 2016 Copyright © 2016 Silver Peak Systems, Inc. All rights reserved. Information in this document is subject to change at any time. Use of this documentation is restricted as specified in the End User License Agreement. No part of this documentation can be reproduced, except as noted in the End User License Agreement, in whole or in part, without the written consent of Silver Peak Systems, Inc. Trademark Notification The following are trademarks of Silver Peak Systems, Inc.: Silver Peak SystemsTM, the Silver Peak logo, Network MemoryTM, Silver Peak NX-SeriesTM, Silver Peak VX-SeriesTM, Silver Peak VRX-SeriesTM, Silver Peak Unity EdgeConnectTM, and Silver Peak OrchestratorTM. All trademark rights reserved. All other brand or product names are trademarks or registered trademarks of their respective companies or organizations. Warranties and Disclaimers THIS DOCUMENTATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. SILVER PEAK SYSTEMS, INC. ASSUMES NO RESPONSIBILITY FOR ERRORS OR OMISSIONS IN THIS DOCUMENTATION OR OTHER DOCUMENTS WHICH ARE REFERENCED BY OR LINKED TO THIS DOCUMENTATION. REFERENCES TO CORPORATIONS, THEIR SERVICES AND PRODUCTS, ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED. IN NO EVENT SHALL SILVER PEAK SYSTEMS, INC. BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, THOSE RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OF THIS DOCUMENTATION. THIS DOCUMENTATION MAY INCLUDE TECHNICAL OR OTHER INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILL BE INCORPORATED IN NEW EDITIONS OF THE DOCUMENTATION. SILVER PEAK SYSTEMS, INC. MAY MAKE IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED IN THIS DOCUMENTATION AT ANY TIME. Silver Peak Systems, Inc. 2860 De La Cruz Boulevard, Suite 100 Santa Clara, CA 95050 1.877.210.7325 (toll-free in USA) + 1.408.935.1850 www.silver-peak.com/support ii PN 200030-001 Rev Q Contents Contents Preface . v Who Should Read This Manual?. v Manual Organization . v Technical Support . vi Appliance Management Options . vi Chapter 1 Getting Started. 1 Introduction . 2 Summary of Configuration Tasks . 2 Getting Started with Deployment. 3 Deployment Modes . 4 How You Can Adjust the Basic Deployments . 9 Adding Data Interfaces . 10 Modifying Interface Configurations . 11 Configuring Next-Hops . 12 Management Next-Hops . 12 WAN Next-Hops . 12 LAN Next-Hops . 13 Taking a Quick Look at the System Page . 14 Deciding whether to build tunnels automatically . 14 Manually Adding Local Subnets . 15 Adding SSL Certificates and Keys for Deduplication. 16 Chapter 2 Configuring the System and Network . 17 System Information . 18 Deployment . 20 Mapping Labels to Interfaces . 20 LAN–side Configuration: DHCP . 20 WAN–side Configuration. 21 Basic Deployments . 22 How You Can Adjust the Basic Deployments . 27 Adding Data Interfaces . 28 Definitions . 28 Interfaces. 29 Routes . 30 Tunnels . 32 Shaper. 37 Subnets . 41 SSL Certificates. 43 SSL CA Certificates. 45 VRRP . 46 WCCP . 48 System Limits . 51 Chapter 3 Configuring Policies. 53 Route Policies . 54 QoS Policies . 56 Optimization Policies . ..