Product Specification Sheet M3 All Purpose Ink Marker

Total Page：16

File Type：pdf, Size：1020Kb

Product Specification Sheet M3 All Purpose Ink Marker SPECIFICATIONS • Item # : 10571 Black 10572 Blue 10573 Green 10574 Red 10578 Violet 10412 Bullet / Chisel Tip • Style: Valve Activated. • Tip Type: Reversible Bullet/ Chisel • Marking Widths: 3mm., 5mm. (0.178", 0.196") • Dimensions: 5.38" L x 0.63" Ø (136 x 16 mm.) * • Marking Temp. Range: -22 ̊ to 140 ̊ Fahrenheit (-30 ̊ to 60 ̊ C) • Dry Time: approx. 10 sec. • Quantity/ Weight Per Box: 12ea./ 0.7 lb./ (300 g.) • Quantity/ Weight Per Case: 144ea./ 8 lb./ (3.6 kg.) • Directions For Use: Press tip down until inked. Replace cap after use. * Dimensions taken w/ marker capped. PRODUCT FEATURES • All purpose, fast drying permanent ink marks on waxed cartons, stretch film, wood glass, rubber, tape, boxes, labels, and more. • Advanced valve technology ensures smooth ink flow and provides up to 12 times the mileage of ordinary markers. • Ergonomic cap is easy to remove and prevents marker from rolling. TYPICAL USES • Marking on difficult surfaces such as plastic labels, packaging, waxed cartons, tags and parts, as well as on glass, metal, rubber, wood, etc. • Shipping room marking on corrugated, plastic wrap, wood, plastic tags, etc. • Food packaging marking on Styrofoam, shrink wrap, in freezers, etc. • Survey stake marking. • Quality control marking, lab samples (glass slides, plastic containers). • Suitable for signs, posters, canvas, auto glass, stone and concrete. • Marking on plant, tree, and garden markers. SAFETY INFORMATION • Read MSDS before using (available online at www.umarkers.com). • Based on CFR 29, 1910.1200 OSHA Hazard Communication Evaluation this product meets the definition of an "article" and are not subject to the hazards normally associated with the ink when used as intended. • Keep out of reach of children. For professional use only. Rev. 07/29/2016 Made in USA U-Mark, Inc. • 102 Iowa Ave., Belleville, IL 62220 USA • tel. 618-235-7500 • fax 425-962-9840 • www.umarkers.com.

Copy Link

Recommended publications

Cortec Packaging.Pdf
™ VpCI VpCI™ VpCI™ ™ ™ VpCI VpCI Compostable VpCI™ SOLUTION Corrosion is a constant, indiscriminate and costly enemy of metal parts, especially when packaged for storage and transportation. Traditional anti-corrosion methods are messy, costly, and can be hazardous to personnel and the environment. Too often, they’re ineffective as well. Cortec® VpCI™ technology represents a breakthrough solu- tion in corrosion prevention. Our VpCI™ products protect metals with a chemically adsorbed molecular layer that pro- vides multimetal corrosion protection. The coverage is com- plete – all surfaces, including crevices, cavities and other inaccessible void areas receive total protection. The VpCI™ barrier is self-replenishing, even for packaging that’s repeat- edly opened, and typically protects for up to 24 months. The industry proven result is exceptional product protection without the labor-intensive clean-up required with convention- al oil coatings or other inhibiting products – even for previ- ously corroded, painted or coated surfaces. Cortec® VpCIs are environmentally safe, and are not based on nitrites. Cortec® VpCI™ technology. The safety net your products and systems deserve. Anode e Cathod VpCI™ Benefits VpCIs Fight Dissolved® ions VpCI Cost Effective Corrosion at the • Saves costly time and labor Molecules of – no surface preparation required VpCI™ in gaseous phase Molecular Level for application Anode – no cleaning/degreasing required e for product use Cathod Cortec® Vapor phase Corrosion Inhibitors™ • Reduces raw material requirements (VpCI™) provide multimetal protection with cor- – need for oil is eliminated – desiccants are eliminated ® rosion inhibiting vapors that condense onto the Dissolved ions • Eliminates disposal costs VpCI surface of your products and form a thin, uniform, – products are fully recyclable economical and extremely effective corrosion – no hazardous waste disposal costs Molecules of inhibiting layer.
[Show full text]
Howto Print on Corrugatedplastic
How to Print on Corrugated Plastic An explanation of how to print on polypropylene corrugated plastic boards. 1 © Copyright 2018 HP Development Company, L.P. The information contained herein is subject to change without notice. How to Print on Corrugated Plastic What you will need What you will need PP corrugated board Cutting device A clean cloth Gloves (optional) Before Preparing the substrate printing Preparing the job SW tools Printer Isopropyl alcohol Surface tension test (RIP, edition, etc.) (optional) inks/pens (optional) Printing The printing process After Post-print finishing printing Drill and metal drill bits Finishing parts: Plastic eyelet press (optional) H-stakes, nylon clamps, (optional) plastic eyelets, plastic 2 © Copyright 2018 HP Development Company, L.P. The information contained herein is subject to change without notice. clips… How to Print on Corrugated Plastic Preparing the substrate What you will need 1. Substrate check 2. Substrate handling 3. Table grounding A corona treatment is often applied to PP boards tend to hold static charge. Ensure that substrate tables are boards to increase ink adhesion. This Avoid sliding the substrate over the attached and secured to the printer to treatment will diminish over time. Use stack / carrying it across carpeted provide a grounding surface for static- Before Preparing the substrate surfaces. printing fresh material to ensure the best results. loaded materials. NOTE: Latex inks wet materials with a surface energy of at least 30 dynes/cm. Surface energy can be measured with a special set of calibrated pens or inks. Preparing the job Printing The printing process 4. Substrate cutting 5.
[Show full text]
Pvc Piping Systems for Commercial and Industrial Applications
PVC PIPING SYSTEMS FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS Plastic Pipe and Fittings Association © 2012 Plastic Pipe and Fittings Association (PPFA) Acknowledgments We would like to thank the following contributors to the Design Guide: The PVC and Thermoplastic Industrial Piping Systems (TIPS) Product Line Committees and member companies of the Plastic Pipe and Fittings Association (PPFA). In particular the following PPFA companies and individuals ably assisted in reviewing the text and tables and provided valuable comments which added greatly in producing a better and more accurate source document: Chuck Bush – Oatey Company Mike Cudahy – PPFA Staff Patrick Fedor – IPEX Bill Morris – Charlotte Pipe & Foundry Jack Roach – Mueller Industries Bill Weaver – Harvel Plastics Larry Workman – LASCO Fittings All text, tables and photos were prepared and or edited by David A. Chasis of Chasis Consulting, Inc. Using the Design Guide The Design Guide was created to assist engineers, installers, end-users, engineering students and building code officials in learning more of the dos and don’ts of PVC piping systems. The Design Guide is comprised of ten sections including: Introduction Features and Benefits Engineering Design Joining Methods Installation Testing and Repair Applications Building Codes, Standards, and Sample Specifications PVC Piping and the Environment Other Plastic Piping Systems In addition, in the back of the guide is the most complete appendix and glossary of PVC piping systems ever assembled. Other PPFA Educational Materials The PPFA offers a wide range of other educational materials developed to assist the engineering and construction industry to become more proficient in the use of the preferred piping system...plastics! On-site seminars, Webinars, CD-based seminars, workbooks, online tutorials and product and technical literature are available.
[Show full text]
Structural Design Procedure for Corrugated Plastic Drainage Tubing
'-^^n a. STRUCTURAL DESIGN PROCEDURE FOR CORRUGATED PLASTIC DRAINAGE TUBING Technical Bulletin No. 1466 -OjÇûS Agricultural Research Service U.S. DEPARTMENT OF AGRICULTURE in cooperation with The Ohio Agricultural Research and Development Center and Department of Agricultural Engineering Ohio State University ACKNOWLEDGMENTS The author wishes to express appreciation to many colleagues for suggestions and assistance given in the preparation of this technical report-G. O. Schwab, N. R. Fausey, and B. H. Nolte, for reviewing and offering comments on the report; to R. C. Reeve, research investigations leader, who reviewed the report in depth and made detailed suggestions for improving it; and to Dennis L. Bassett, research assistant, who drafted all the figures and graphs in the report. CONTENTS Page List of symbols iv Abstract 1 Introduction 1 Purpose and scope of the report 2 Flexible conduit principle 2 Design procedure 2 Principle 2 Step 1 : General requirements and assumptions 3 Step 2: Design soil load 4 Step 3: Soil-conduit deflection 4 Step 4: Parallel-plate design load 6 Step 5: Plastic material specifications 6 Step 6: Moment-of-inertia of pipe wall 7 Step 7: Corrugation profile design 7 Step 8: Approximating minimum coiling radius for draintube 23 Step 9: Water-entry openings in draintube wall 24 Comments and discussion 26 Selected references 27 Appendix I 28 Appendix II 30 Analysis example 1 3Q Analysis example 2 35 Appendix III 4O Washington, D.C. Issued July 1973 For sale by the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402 Price: 65 cents, domestic postpaid; 40 cents, GPO Bookstore Stock No.
[Show full text]
Double Face HDPE Sheets Anticipate Outstanding Results with Our Plastic Corrugated Sheets
Double Face HDPE Sheets Anticipate outstanding results with our plastic corrugated sheets. Liberty Plastics sheets are made from our high-density polyethylene (HDPE) laminate board, which is lightweight, strong, versatile, reusable, and weather and chemical resistant. Our HDPE sheets are fabricated using a co-extrusion process that allows three distinct layers of material to come together and form a substrate that is unmatched. Liberty Plastics corrugated plastic is made in the USA with postindustrial recycled material content. Our numerous product features drive your competitive advantage. So start experiencing the many benefits of HDPE. Multiple Sheet Size Options Learn the Value of Laminate Includes sheets up to 60” wide for a broad selection of sizes Liberty Plastics uses high density Standard Weight Options polyethylene (HDPE) laminate board. Includes 140 – 500 lb. msf sheets; adds strength and rigidity without adding thickness Our proprietary laminated corrugated substrate maintains service life of over Multiple Color & Print Options Customizes sheets for identification purposes 50 cycles even in the most rigorous applications. A strong performer in Inventory Management any environment, our plastic corrugate Offers inventory management services to support JIT inventory needs survives extreme heat and cold while resisting cracking. Stock Sheet Program Provides quick turnaround times for stock The triple wall laminate design of our or custom sheets substrate resists punctures and surface Custom Extrusion Program abrasions and holds superior surface crush Extrudes sheets up to 60” in board weights properties over polypropylene, from 140 - 500 lbs yet is still lightweight. Custom Die Cutting, Color, Print Offers unique sheet attributes for unique customer applications Our high-performance HDPE sheets are a testament to the quality and durability of our recyclable stock solutions.
[Show full text]
Reusable Transport Packaging Directory
Authors: Kenneth Brown, David Van Hattum Graphic Design, Illustration: Paul Andre, Scott Andre 520 Lafayette Road, Second Floor • St. Paul, MN 55155-4100 612-296-3417 • 800-657-3843 February 1994 Reprinted October 1995 Cover : Recycled paper / 100% post-consumer content Inside pages: Recycled paper / 15% post-consumer content 3 Contents: Introduction . 6 Bags . 9 Boxes . 10 Bins. 13 Totes . 15 Pails . 18 Drums. 19 Containers for liquids . 21 Palletized containers . 23 Pallets and pallet reconditioning . 28 Slip sheets. 31 Racks . 32 Cushioning . 33 Support services for reuse . 36 Alternative shipping products . 37 Glossary . 38 Application for listing . 39 t Quick Reference Chart . 40 5 Transport Packaging The number of calls to the Office of Environmental containers means maintenance and purchasing departments Assistance (OEA) from businesses seeking information on can also realize savings. efficient transport packaging more than tripled in one year. More and more businesses are seeking information on The most typical problem is finding a manufacturer to make efficient transport packaging. Here are three examples of reusable containers that meet specific needs. This companies that sought information and then put that directory’s goal is to help make that search a little easier. information into action. Packaging Universal Hospital Services, Inc. Packaging is necessary. Damaged products squander Universal Hospital Services (UHS) rents medical equipment such as aspirators used to aid breathing. These delicate, resources and money and generate waste. Packaging helps precise instruments were being shipped out of Minnesota’s assure that products arrive undamaged and that they can be transported and handled efficiently. Some packaging, distribution center in single-use corrugated containers with loose-fill cushioning.
[Show full text]
Company Profile
CORPORATE PROFILE Always challenging. ［ Principles ］ Moriroku Group will create high value with its future-oriented creativity and advanced technologies, while contributing to the global society. Moriroku has been taking on challenges for 350 years. We will comply with domestic and foreign laws and regulations, and When we supplied indigo to the world. 1.Compliance aim to become a trusted industrial group through fair and equitable corporate activities. When we began handling synthetic resins. Our corporate members will individually exercise their autonomy When we became a manufacturer. 2.Respect for life and dignity and creativity, and respect the personality and individuality of their colleagues. Today, too, as we look to our 400th anniversary. We will provide our customers with valuable ideas, high quality 3.Customer satisfaction services, and fine products to maintain their satisfaction. Over our long history we have learned to transform HOLDINGS 01 As a good corporate citizen, we will contribute to society through ourselves, and we will continue to create new value in the 4.Contribution to society environmental consciousness and community-oriented corporate future and exceed customer expectations. activities. We will make continued efforts to improve our corporate value, by 5.Progressive spirit Moriroku is still taking on challenges. anticipating future trends. We aim to become a corporate group that puts a premium on teamwork 6.Total cooperation and the pursuit of ideals. 1 Principles 4 History 7 Moriroku Technology Products 10
[Show full text]
Plastic Pipe and Fittings: Past, Present, and Future Plastic Pipe and Fittings Past, Present, and Future STP 1528
Walsh Journal of ASTM International Selected Technical Papers STP 1528 JAI • Plastic Pipe and Fittings: Plastic Pipe and Fittings Past, Present, and Future Past, Present, and Future Past, Present, STP 1528 JAI Guest Editor www.astm.org Thomas S. Walsh ISBN: 978-0-8031-7514-3 Stock #: STP1528 Journal of ASTM International Selected Technical Papers STP1528 Plastic Pipe and Fittings: Past, Present, and Future JAI Guest Editor: Thomas S. Walsh ASTM International 100 Barr Harbor Drive PO Box C700 West Conshohocken, PA 19428-2959 Printed in the U.S.A. ASTM Stock #: STP1528 Library of Congress Cataloging-in-Publication Data ISSN: 978-0-8031-7514-3 Copyright © 2011 ASTM INTERNATIONAL, West Conshohocken, PA. All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, fi lm, or other distribution and storage media, without the written consent of the publisher. Journal of ASTM International (JAI) Scope The JAI is a multi-disciplinary forum to serve the international scientifi c and engineering community through the timely publication of the results of original research and critical review articles in the physical and life sciences and engineering technologies. These peer-reviewed papers cover diverse topics relevant to the science and research that establish the foundation for standards development within ASTM International. Photocopy Rights Authorization to photocopy items for internal, personal, or educational classroom use, or the internal, personal, or educational classroom use of specifi c clients, is granted by ASTM International provided that the appropriate fee is paid to ASTM International, 100 Barr Harbor Drive, P.O.
[Show full text]
Brazilian Processed Plastic Industry at Pack Expo Las Vegas 2017 Some
20/09/2017 Brazilian Processed Plastic Industry at Pack Expo Las Vegas 2017 Brazilian manufacturers will feature the technology and innovation in packaging from Brazil at Pack Expo Las Vegas, to be held from September 25 – 27 2017 at Las Vegas Convention Center, Las Vegas, NV USA. Amongst Think Plastic Brazil’s participant companies exhibiting at the show are Cartonale; Cromex; Europackne; FFS Filmes; GDM; Valfilm; Videplast; Vitopel and Zaraplast S/A. Due to the multiple business relations between USA and Brazil and the recent growth of the industry, Brazil maintains a high interest in the North American market and arrives at Pack Expo Las Vegas with manufacturers that will be presenting their product range of plastics including: Packaging; Cosmetic Packaging; Corrugated Plastic Board Solutions; Additives and Compounds; PE Stretch Film; Shrink film; Specialty Films; FFS; Shrink Bag with PVDC; EVOH and polyamide films; Petfood Packaging; Labels; Stand Up Pouches; PE Bags; PP Bags; PE Films on rolls; Laminated Films; BOPP/ OPP Films, and others. Export figures Processed Plastic Exports from Brazil to USA in 2016 reached almost USD108,5 million, 9,7% of the total USD1,1 billion commercialized worldwide by the country in that year. USA is the third largest destination of Brazilian products from this segment, after Argentina (USD209,5 million) and The Netherlands (USD154,4 million). Some companies at the event - South Pavillion - Booth S-6830 Cartonale Cartonale produces plastic corrugated in sheets, forms, and containers in many standard and custom sizes and strengths. Customers may also choose color and print styles. The company’s state of the art production, allied with the scale of production, makes Cartonale a reliable and competitive supplier in the world market.
[Show full text]
New Technology in Postharvest Plastics
New Technology in Postharvest Plastics Jeffrey K. Brecht Horticultural Sciences Department University of Florida Postharvest Horticulture Plastics • Bulk packages (for harvest and transport) – Plastic bins – Returnable plastic containers (RPC) – Corrugated plastic containers • Consumer packages – Flexible and rigid containers – Modified atmosphere packages (MAP) Plastic Waste • Facts – The average per capita plastic waste per year in the USA is 185 pounds – Plastic accounts for about 10% of the total waste generated in the USA – Worldwide, about 500 billion plastic bags are used per year – Virtually every bit of plastic ever made still exists in some shape or form, minus the small amount incinerated • Solutions – Recycling - #1 (PETE) and #2 (HDPE) are the most commonly recycled plastics Plastic bags and polystyrene foam have very low recycling rates – Alternatives – starch, cellulose and other plant-based biopolymers that mimic plastics Bioplastics • Definition – made from natural materials, such as corn and potato starch, sugar cane, and cellulose • Made from renewable resources. The Appearance of some bioplastics is virtually indistinguishable from traditional petrochemical plastics • Bioplastics are typically designed to be biodegradable or compostable • Examples: – Polylactic acid (PLA) or polylactide (PLLA/PLDA) and cellulose acetate – Excess potato starch (waste stream) used to produce resins that can be utilized in packaging – Sugar cane used to produce LLDPE and HDPE that process and perform like traditional plastics (Bio)Degradable
[Show full text]
Your Essential Packaging Guide Kitepackaging.Co.Uk
Your essential packaging guide kitepackaging.co.uk Packaging solutions for products that rock and roll! an employee-owned business Welcome 4 - 9 Environmental range 10 - 11 Recycling guide Whether you order regularly from us, haven’t ordered for a while or are a brand new customer to Kite Packaging, this packaging buyer’s guide will provide you with some 12 - 13 Cardboard boxes essential tips when choosing products. 14 - 15 Kite’s cardboard box range Our employee-owned philosophy Founded in 2001 as an employee-owned business, we believe that: 16 - 19 Postal packaging “Customer satisfaction matters so much more when you own the business” 20 - 26 Void fill & cushioning All employees have made a personal financial investment into Kite, and as shareholders have created a business based on a true partnership philosophy. 27 Removal packaging Open your account today Book a packaging audit today Business credit accounts are available, Kite Packaging is the only UK packaging subject to a satisfactory credit check, company that has the depth of resource 28 Foam protection allowing you to benefit from up to 30 days to be able to offer full packaging audits credit through our: 29 - 30 Packaging tape To open a new account: Compliance scheme – packaging waste 31 Tape guide Do it online by selecting regulations 32 Tape dispensers & carton sealers ‘open an account’ on our website Packaging technologists – standard homepage. The process is straightforward, pack design and pack velocity 33 - 34 Polythene & paper bags with your credit check completed and
[Show full text]
Made in North Carolina Recycled-Content Products Help Fuel the State’S Economy
Made in North Carolina Recycled-Content Products Help Fuel the State’s Economy N.C. Department of Environment and Natural Resources January 2007 Made in North Carolina From the Cover: 2 1 - Cascades Tissue Group (p. 12) 1 2 - Caraustar Industries Inc. (p. 11) 3 - Artist Colony (p. 9) 4 - Unifi Inc. (p. 25) 5 - Engineered Recycling Co. (p. 16) 6 - DuraLine Imaging Inc. (p. 15) 5 7 - Owens-Illinois Inc. (p. 21) 3 4 8 - Crumpler Plastic Pipe Inc. (p. 13) 6 7 8 Made in North Carolina is published by the N.C. Recycling Business Assistance Center, a program of the Division of Pollution Prevention and Environmental Assistance of the N.C. Department of Environment and Natural Resources. Michael F. Easley, Governor, North Carolina William G. Ross Jr., Secretary, Department of Environment and Natural Resources Division of Pollution Prevention and Environmental Assistance For more information call (919) 715-6500 or (800) 763-0136, or write to DPPEA, 1639 Mail Service Center, Raleigh, NC 27699-1639. DPPEA-FY-06-05. 600 copies of this public document were printed on recycled paper at a cost of $4,625.32, or $7.71 per copy. N.C. Recycling Business Assistance Center The N.C. Recycling Business Assistance Center is a partnership between the N.C. Department of Environment and Natural Resources’ Division of Pollution Prevention and Environmental Assistance and the N.C. Department of Commerce. Its mission is to support and grow the state’s recycling industry through technical assistance and partnerships. To achieve this objective, RBAC: • Works one-on-one with recycling companies to assess needs and provide both direct and indirect assistance through partnering agencies.
[Show full text]