Garand Collectors Association Journal - Spreadsheet Search Created and Maintained by Eric A
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
FIREARM SAFETY CERTIFICATE MANUAL for California Firearms Dealers and DOJ Certified Instructors
F S C Firearm Safety Certificate M A N U A L for California Firearms Dealers and DOJ Certified Instructors California Department of Justice Division of Law Enforcement Bureau of Firearms June 2020 FIREARM SAFETY CERTIFICATE MANUAL For California Firearms Dealers and DOJ Certified Instructors TABLE OF CONTENTS Introduction. 1 Firearms Dealer Responsibilities The Firearm Safety Certificate Law. .2 Verifying and Recording FSC Information on a DROS. 2 Firearm Safety Certificate Exemptions. 3 Safe Handling Demonstration Affidavits. 6 Firearm Safety Certificate Study Guide. 6 DOJ Certified Instructor Responsibilities The Firearm Safety Certificate Law. .7 Firearm Safety Certificate - Certified Instructor Cards. 7 Administering the FSC Test and Issuing FSCs. 7 Firearm Safety Certificate Fees. 7 The Firearm Safety Certificate Test Format. 7 Firearm Safety Certificate Test Guidelines. 8 Scoring the Firearm Safety Certificate Test. .8 Firearm Safety Certificate Issuance. 9 Firearm Safety Certificate Card Replacement. 9 Firearm Safety Certificate Record Keeping. 9 FSC Test Disqualification and Specific Acts of Collusion. 10 Safe Handling Demonstrations. 10 APPENDIX I Safe Handling Demonstration Steps (Conventional Firearms). 12 Semiautomatic Pistol. 12 Double-Action Revolver. 15 Single-Action Revolver. 17 Pump Action Long Gun. 19 Break-Top Long Gun. 20 Bolt Action Long Gun. 21 Lever Action Long Gun. 22 Semiautomatic Long Gun With a Detachable Magazine. 23 Semiautomatic Long Gun With a Fixed Magazine. 24 Safe Handling Demonstration Steps (Alternative Designs). 25 Semiautomatic Pistol With a Non-Locking Slide. 25 Semiautomatic Pistol With a Fixed Magazine. 26 Semiautomatic Pistol With a Magazine Operated Toggle Lock. 26 Semiautomatic Pistol With a Top-Feeding Magazine. 27 Semiautomatic Pistol With a Tip-Up Barrel. -
1St Gun Auction List .Xlsx
Lot# Gun Description # 1 - 1 A.H. Fox Sterlingworth 16ga # 1 - 2 A.H. Fox Sterlingworth 12ga # 1 - 3 Parker Bros VH 12ga w/second set 12ga # 1 - 4 Parker Bros VH 20ga # 1 - 5 Parker Bros VH 16ga # 1 - 6 Parker Bros VH 12ga w/second set 12ga # 1 - 7 Parker Bros Trojan 20ga # 1 - 8 Parker Bros GHE 12ga (damascus barrel) # 1 - 9 Parker Bros Trojan 16ga # 1 - 10 Parker Bros PH grade 12ga (twist barrel) # 1 - 11 Parker Bros VH 12ga # 1 - 12 Antique Parker Bros DH grade 12ga (damascus barrell) # 1 - 13 Erdmann Anschutz 16ga (Kroppsteel chambers) # 1 - 14 Winchester Mod 1894 .30WCF # 1 - 15 Winchester Mod 54 .30-06 rifle Lyman receiver sight # 1 - 16 Winchester Mod 57 .22 Bolt Action # 1 - 17 Winchester Mod 74 .22 tube feed semi-auto # 1 - 18 Winchester Mod 59 .22 Bolt Action # 1 - 19 Winchester Mod 94 .30-30 Carbine Pre-64 # 1 - 20 Winchester Mod 64 .32 Special Pre-64 Winchester Mod 75 .22 Target Rifle w/J.W. 25" vintage target scope in micrometer mounts & vintage # 1 - 21 sling # 1 - 22 Winchester Mod 1897 12ga # 1 - 23 Winchester Mod 12 12ga mod choke # 1 - 24 Winchester Mod 70 30-06 # 1 - 25 Winchester Mod 1 Super X 12ga modified choke # 1 - 26 T.Barker SxS hammergun for .44 shot cartridges (not for any .410 shells) # 1 - 27 Ranger SxS .410 shotgun # 1 - 28 Stevens SxS .410 shotgun # 1 - 29 Stevens Mod 22-410 o/u (glued stock) # 1 - 30 Westernfield .410 # 1 - 31 Harrington & Richardson .410 # 1 - 32 Harrington & Richardson .410/.44 SxS hammergun # 1 - 33 New England Firearms .410 Single # 1 - 34 Franchi o/u 12ga Mod 451 (Bill Jordan collection -
K98-20-Updated for Pdf.Pub
Owner’s Manual for the Care and Use of The Crown Jewel of Bolt Action Rifles! The Legendary . Mauser 98k - Model 48 Rifle in 8mm Mauser Caliber This Owner’s Manual should always accompany the rifle and be transferred with it upon change of ownership. Become thoroughly knowledgeable with the instructions contained here and review the entire booklet each time you intend to use your rifle. This rifle must be thoroughly cleaned before use. Copyright© 1999 by Mitchell Manufacturing Corp. All rights reserved. 2 Fig 1-Exterior Components Mauser 98k - Model 48 Parts Identification This illustration is intended to identify all exterior component parts for easy reference as you go through this owners manual in detail. Controlled Round Front Sight Safety Full-length Teak Feeding Hood Visible Firing Pin Lever Upper Handguard Cocking Indicator Range-adjustable Gas Rear Sight Shield Drift-adjustable Front Sight Curved Bolt Handle Bayonet Take Down Recoil Lug Lock Pin Lug Magazine Full-length Cleaning Sling Floor Plate Teak Stock Rear Front Rod Slot Claw Barrel Barrel Extractor Band Band Two Stage Military Trigger Cupped Steel Butt Plate Mauser 98k - Model M48 &RQJUDWXODWLRQV on your purchase of a very special rifle. The rifle you have is more than 50 years old and, at the same time, is a like-new . Collector Grade Rifle! Your rifle has matching serial numbers on all numbered parts of the rifle. This is rare in the history of gun collecting and especially so in former military rifles. It is very important in establishing the value of your rifle (for insurance or perhaps trading purposes). -
OTOLARYNGOLOGY/HEAD and NECK SURGERY COMBAT CASUALTY CARE in OPERATION IRAQI FREEDOM and OPERATION ENDURING FREEDOM Section III
Weapons and Mechanism of Injury in Operation Iraqi Freedom and Operation Enduring Freedom OTOLARYNGOLOGY/HEAD AND NECK SURGERY COMBAT CASUALTY CARE IN OPERATION IRAQI FREEDOM AND OPERATION ENDURING FREEDOM Section III: Ballistics of Injury Critical Care Air Transport Team flight over the Atlantic Ocean (December 24, 2014). Photograph: Courtesy of Colonel Joseph A. Brennan. 85 Otolaryngology/Head and Neck Combat Casualty Care 86 Weapons and Mechanism of Injury in Operation Iraqi Freedom and Operation Enduring Freedom Chapter 9 WEAPONS AND MECHANISM OF INJURY IN OPERATION IRAQI FREEDOM AND OPERATION ENDURING FREEDOM DAVID K. HAYES, MD, FACS* INTRODUCTION EXPLOSIVE DEVICES Blast Injury Closed Head Injury SMALL ARMS WEAPONS Ballistics Internal Ballistics External Ballistics Terminal Ballistics Projectile Design Tissue Composition and Wounding WEAPONRY US Military Weapons Insurgent Weapons SUMMARY *Colonel, Medical Corps, US Army; Assistant Chief of Staff for Clinical Operations, Southern Regional Medical Command, 4070 Stanley Road, Fort Sam Houston, Texas 78234; formerly, Commander, 53rd Medical Detachment—Head and Neck, Balad, Iraq 87 Otolaryngology/Head and Neck Combat Casualty Care INTRODUCTION This chapter is divided into four sections. It first small arms weapons caused just 6,013 casualties dur- examines the shifts in weapons used in the combat ing the same time.2 Mortars and rocket-propelled zones of Iraq and Afghanistan, and compares them to grenades, although highly destructive, injured 5,458 mechanisms of wounding in prior conflicts, including and killed only 341 US soldiers during the same time comparing the lethality of gunshot wounds to explo- (Table 9-1). In a review of wounding patterns in Iraq sive devices. -
USA M14 Rifle
USA M14 Rifle The M14 rifle, officially the United States Rifle, Caliber 7.62 mm, M14, is an American select-fire battle rifle that fires 7.62×51mm NATO (.308 in) ammunition. It became the standard-issue rifle for the U.S. military in 1959 replacing the M1 Garand rifle in the U.S. Army by 1958 and the U.S. Marine Corps by 1965 until being replaced by the M16 rifle beginning in 1968. The M14 was used by U.S. Army, Navy, and Marine Corps for basic and advanced individual training (AIT) from the mid-1960s to the early 1970s. The M14 was developed from a long line of experimental weapons based upon the M1 Garand rifle. Although the M1 was among the most advanced infantry rifles of the late 1930s, it was not an ideal weapon. Modifications were already beginning to be made to the basic M1 rifle's design during the last months of World War II. Changes included adding fully automatic firing capability and replacing the eight-round en bloc clips with a detachable box magazine holding 20 rounds. Winchester, Remington, and Springfield Armory's own John Garand offered different conversions. Garand's design, the T20, was the most popular, and T20 prototypes served as the basis for a number of Springfield test rifles from 1945 through the early 1950s Production contracts Initial production contracts for the M14 were awarded to the Springfield Armory, Winchester, and Harrington & Richardson. Thompson-Ramo-Wooldridge Inc. (TRW) would later be awarded a production contract for the rifle as well. -
High Power Rifle
RIVANNA RIFLE AND PISTOL CLUB, INC. PO BOX 7883 CHARLOTTESVILLE, VIRGINIA 22906 ANNOUNCES THE 2021 RIVANNA RIFLE & PISTOL CLUB HIGH POWER RIFLE MATCHES Jan 2, Feb 6, Mar 6, Apr 3, May 1, June 5, July 3, Aug 7, Sep 4, Oct 2, Nov 6, Dec 4 This is a National Rifle Association Approved Match SPONSOR: The Rivanna Rifle and Pistol Club RULES: Rules shall be as printed in the latest edition of the NRA High Power Rifle Rule Book. ELIGIBILITY: Open to anyone. NRA and Virginia State Shooting Association membership is encouraged. ENTRIES: Entries must be made the day of the match at the range. No reservations or advance entries will be accepted. For general information see our club web page, Facebook page (links below) or contact: Mr. Steve Dellinger 434-962-1209 Cell 17322 James Madison Highway 434-589-5338 Home (after 7:00pm) Palmyra, Virginia 22963 email- [email protected] ENTRY FEES: A single $15.00 fee for entry in the match will be charged ($4.50 of this fee goes to the NRA as a registration fee for the match). Anyone wishing to shoot for practice on the second relay will be required to pay a $5.00 target fee. Competitors for record take priority for positions on the line over practice shooters. SQUADDING: Two relays will be squadded at 9:00am and 11:00am on a first come basis. It is strongly recommended that you arrive at the range by 8:00am to ensure a position in the first relay. Relays are limited to 20 competitors per relay, 2 relays (40 competitors) per day. -
Swedish Mauser Rifle Manual
Swedish Mauser Rifle Manual A translation from the 1977 Swedish Army Manual (SoldI Mtrl) Translated by Anders J. 1999 http://www.geocities.com/Pentagon/Quarters/1106 The Swedish Military Firearms Forum: http://www.hotboards.com/plus/plus.mirage?who=swedeforum Note: Feel free to copy this manual and to pass it along to someone else. I only ask you to respect my copyright and not alter anything. Don’t hesitate to contact me if you have any questions or feedback. Contents 1. General information 2. Accessories 3. Sights 4. Bayonet 5. Blank firing device 6. Loading 7. Unloading 8. Disassembly 9. Assembly 10. Cleaning 11. Rifle m/41B 12. Scope m/41B 13. Low-light sights 14. 6.5x55mm Ammunition Ó1999 Anders J. Swedish Mauser Rifle Manual 1. General Information Rifle m/96(B) Rifle m/38(B) Caliber: 6.5mm Rifle m/38(B) differs from the m/96 rifle Capacity: 5 rounds only in the way that its barrel is shorter, a Weight: 4.5 kilo different rear sight is fitted and the bolt- The rifle can be fitted with a bayonet. handle is turned down. The rifle is safe when the safety is to the The rifle is ready to fire when the safety right. is to the left. 2. Accessories 1. Low-light sights (in case) 4. Sling 2. Bore-brush 5. Sling hook 3. Oiler Ó1999 Anders J. 2 Swedish Mauser Rifle Manual 3. Sights Rifle m/96(B) has a rear sight graduated between 300-600 meters. The sight is used with the ladder in the down position. -
RIFLES: the M1 Garand Rifle
September 09 Blue Press Section 2 7/14/09 12:09 PM Page 41 41 RIFLEES: The M1 Garand Rifle General George S. Patton: Garand’s original design. Once this was corrected, the barrel, so it was in all probability a lend-lease “Thee fieverythingnes workedt b afine.t At smallle tubim of specialplemearmn tot our e Englishve cousins.r devised.” lubricant that looked like peanut butter (Lubriplate M1C and M1D sniper rifles, equipped with ™) was stored in the butt of the rifle where a trap- scopes offset to the left, were standardized a bit door had been added at about the time the gas-trap late for more than minimal use during WWII. A was replaced by porting. A disassembly tool and cone-shaped flash hider was produced for these either a jointed cleaning rod or a pull-through weapons, as was a strap-on leather cheek pad. The thong and brass bristle brush were also stored main sniper weapon during the war was the there. A shorter version of the old M1905 bayonet M1903A4, basically an M1903A3 bolt-action rifle was issued for the Garand. Designated the M1 bay- topped with a scope. Following the war, during the onet and equipped with plastic scales, the blade Korean War era, International Harvester and Har- a measured 10 inches. It would also fit the older rington & Richardson also produced M1s. These bolt-actions. Several types of grenade launchers were marked “International Harvester” and “HRA were also made over the life of the M1. These Arms Co.” respectively on the receiver. -
866-NUMRICH (866-686-7424) Ngpmay11full 3/28/2011 10:40 AM Page 2
NGPMay11Full 3/28/2011 10:40 AM Page 1 IF YOU DON’T SEE WHAT YOU NEED, ASK US! S&W SIGMA SW40F SLIDE BERETTA A390 SEMI-AUTO SHOTGUN New, factory original, stripped, .40 S&W slide with matte black finish. BARRELS Quantities are limited. Now is your chance ITEM#SGN0511-19 $97.00 to purchase a brand RUGER MKII RIFLE EXTRACTORS new, factory Beretta barrel at a great price. These matte black, ventilated rib Maintain optimal function of your MKII rifle with a brand new, factory original extractor. These stainless steel extractors are available barrels come with a bead front sight, for the following caliber groups. three flush-mount choke tubes and a Short Action Caliber Extractor (.243, .308, .22-250, etc.) . ITEM#SGN0511-20 $20.65 wrench. Chambered for 2-3/4” or 3” Long Action Caliber Extractor (.270, .30-06, .25-06, etc.) . ITEM#SGN0511-21 $20.65 shells. Choose from the following. Magnum Action Caliber Extractor (.300 Win Mag, .338 Win Mag, .375 H&H, etc.) . 12 Ga. 24” Barrel . ITEM#SGN0511-41 $179.95 . ITEM#SGN0511-22 $20.65 20 Ga. 28” Barrel . ITEM#SGN0511-42 $179.95 .223 Rem Caliber Extractor . ITEM#SGN0511-23 $20.65 BERETTA A300 SERIES SEMI-AUTO SHOTGUN RUGER MINI-14 MAGAZINE PARTS BARRELS Refurbish your Mini-14 magazine with these new, factory original, sub- Take advantage of component parts. These parts will fit all capacity factory magazines, except ENFIELD NO. 32 MKII SNIPER SCOPE for the spring, which fits 5 round magazines only. discounted pricing High-quality, reproduction, of the original WWII No. -
Increasing Small Arms Lethality in Afghanistan: Taking Back the Infantry Half-Kilometer
Increasing Small Arms Lethality in Afghanistan: Taking Back the Infantry Half-Kilometer A Monograph By Major Thomas P. Ehrhart United States Army School of Advanced Military Studies United States Army Command and General Staff College Fort Leavenworth, Kansas AY 2009 Approved for Public Release; Distribution is Unlimited Form Approved REPORT DOCUMENTATION PAGE OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing this collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202- 4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 2. REPORT TYPE 3. DATES COVERED (From - To) 30-11-2009 SAMS Monograph January 2009 - December 2009 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER Increasing small arms lethality in Afghanistan: Taking back the infantry half- 5b. GRANT NUMBER kilometer 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER MAJ Thomas P Ehrhart, United States Army 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. -
Ready for Battle: the Personal Equipment of a World War II Soldier
Ready for Battle: The Personal Equipment of a World War II Soldier Adapted from ―Survey of U.S. Army Uniforms, Weapons and Accoutrements‖, courtesy of the US Army Center of Military History: http://www.history.army.mil/html/museums/uniforms/survey_uwa.pdf The United States Army in World War II had a distinct advantage over the Axis when it came to equipment. Both in terms of quality and quantity the power of American industry kept the GI’s well supplied. For a Soldier, equipment is a matter of survival. Even something as simple as a button can make the difference between victory and defeat if it fails to function properly at the wrong time. For this reason Soldiers have a strong tendency to become attached to equipment they like, and to modify or discard equipment they find unreliable or useless. Among the Infantry, who have to carry their equipment wherever they go, this tendency is even stronger. Individual Load Carrying Equipment Soldiers must carry everything they need for combat operations with them at all times. Individual load carrying equipment is designed to allow the Soldier to carry a basic load of ammunition, food, water, and first-aid gear. The exact make-up of this load varies from conflict to conflict. In more modern times the load has grown to include additional equipment such as gas masks, maps, compasses, and radios. Because of the cost of replacing equipment for Soldiers is high, equipment is usually replaced in phases, with front-line troops receiving the new equipment first. Support units typically receive equipment later as older equipment wears out or becomes obsolete. -
7.92×57Mm Mauser 1 7.92×57Mm Mauser
7.92×57mm Mauser 1 7.92×57mm Mauser 7.92×57mm Mauser From left to right 9.3×62 mm, .30-06 Springfield, 7.92×57mm Mauser, 6.5×55mm and .308 Winchester cartridges Type Rifle Place of origin German Empire Service history In service 1905–present Used by Germany, United Kingdom, Spain, Czechoslovakia, Poland, China, Dominican Republic, Yugoslavia, Ottoman Empire, Turkey, Iran, Egypt, and many other countries Wars World War I, World War II and others Production history Designer German Rifle Testing Commission Designed 1903/1905 Variants 8×57mm IRS (rimmed) Specifications Parent case M/88 Case type Rimless, bottleneck Bullet diameter 8.08 mm / .318 (I and IR) and 8.20 / .323" (IS and IRS) Neck diameter 9.08 mm (0.357 in) Shoulder diameter 10.95 mm (0.431 in) Base diameter 11.94 mm (0.470 in) Rim diameter 11.95 mm (0.470 in) Rim thickness 1.30 mm (0.051 in) Case length 57.00 mm (2.244 in) Overall length 82.00 mm (3.228 in) Case capacity 4.09 cm3 (63.1 gr H O) 2 Rifling twist 240 mm (1 in 9.45 in) Primer type Large rifle 7.92×57mm Mauser 2 Maximum pressure 390 MPa (57,000 psi) Ballistic performance Bullet weight/type Velocity Energy 11.7 g (181 gr) RWS DK 820 m/s (2,700 ft/s) 3,934 J (2,902 ft·lbf) 12.1 g (187 gr) RWS 820 m/s (2,700 ft/s) 4,068 J (3,000 ft·lbf) HMK 12.7 g (196 gr) RWS 800 m/s (2,600 ft/s) 4,064 J (2,997 ft·lbf) TMR 12.8 g (198 gr) RWS ID 800 m/s (2,600 ft/s) 4,096 J (3,021 ft·lbf) Classic Test barrel length: 600 mm (23.62 in) [1] Source(s): RWS / RUAG Ammotech The 7.92×57mm Mauser (designated as the 8mm Mauser or 8×57mm by the SAAMI [2] and 8 × 57 IS by the C.I.P.[3]) is a rimless bottlenecked rifle cartridge.