DOCSLIB.ORG

Extra Care Protection

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Extra Care Protection Extra Care Protection Powertrain Coverage Engine Front/Rear Wheel Drive Engine block and all internal components, cylinder heads, oil pan, engine Final drive housing and all internal parts, drive shafts, front hub, bearings, mounts, intake manifold, exhaust manifold, harmonic balancer, flywheel, starter, differential carrier assembly, axle carrier, axle case, axle bearing, rear axle hub air cleaner, timing belt and cover, accelerator rod and cable, vacuum pump, bearings, universal joints, propeller shafts, axle housing and all internal parts, expansion plugs, engine dipstick and tube, valve covers, camshaft cover, timing drive shaft centre supports, constant velocity joints and boots, axle shafts, front belt tensioner, water pump, fuel pump, fan and/or motor, fluid coupling, radiator, axle hub bearings. thermostat, oil cooler and steel lines, injection pump, timing gear and chain, engine control computer, oil pump. Four Wheel Drive Transfer case and all internal components, front/centre/rear differential Manual or Automatic Transmission/Transaxle assemblies and all internal components, front hub and spindle assembly Case and all internal parts, transmission mounts, transmission cooler and steel (including locking device). lines, oil pan, clutch cover, clutch master cylinder, clutch release cylinder, torque converter, dipstick and tube, kickdown linkage. Seals/Gaskets/Fluids/Filters All seals and gaskets used to contain fluid/lubricants within covered components, replacement of coolant, refrigerant, lubricants and filters when required as a result of a failure of a covered component. Comprehensive Coverage *New* Hybrid Components (For Hybrid Vehicles Only) High Tech Components Lexus hybrid owners can now enjoy added peace of mind with Extra Care All computers, actuators and sensors used in the following electronically Protection. Any New Vehicle ECP purchased on or after May 1, 2010 now controlled units and/or systems: electronic modulated suspension system, extends the original warranty coverage on the following hybrid components - progressive power steering system, electronic controlled transmission, antilock the HV battery, battery control module, hybrid control module, and the brake system, cruise control system, body and door control computer. All inverter/converter. sensors. including hoses, pipes, nuts, clamps, wires, switches and sensors. Safety Restraints Emission Control Front and rear seatbelts, airbags. Electronic fuel injection system, distributor, ignition coil, igniter, ignition wire, fuel tank, fuel cap, hoses, pipes, air pump, air injection manifold, throttle Front/Rear Suspension positioner, modulator, catalytic converter, exhaust pipe (manifold to catalyst), Suspension arms, stabilizer bars, stabilizer links, ball joints, stabilizer bushings, EGR pipe, EGR valve, vacuum switching valve, all parts used in positive crank wheel bearings, shock absorbers, shafts, steering knuckles. case ventilation system, air injection or air suction system, emission control sensor. Steering Steering column, shaft, power steering pump, power steering pulley, rack ends, Electrical System steering wheel, linkage, tubes, rack end boots, steering gear, power steering Power window motors and regulators, exterior mirror motors, electric door fluid reservoir tank, hoses. lock actuators, power seat motor and gears, sunroof motor, wiper motor, washer pumps, all manually operated switches, wiring harness, speedometer Heating/Air Conditioning and cable, wiper arms, linkage and other parts used in the preceding All A/C components, blower motors, electronic heater control unit. components and/or systems including hoses, pipes, nuts, clamps, wires, switches and sensors. Brakes Body Hardware Master cylinder, brake booster, calipers, wheel cylinders, proportioning valve, hydraulic lines, ABS actuators, parking brake, control handle, cables, master Door hinges (front/rear/hatch), inside door handles (front/rear/hatch), outside cylinder reservoir, actuator, pedal. door handles (front/rear/ hatch), hood and hatch supports, fuel door release cable, trunk release cable, child safety door lock mechanism. .
Load more

Recommended publications
  • The Self-Steering Axles
    THE SELF-STEERING AXLES R O A D R A N G E The costs for fuel and maintenance of vehicles are an increasing component of the running costs for a transport company. > Fuel economy. Fuel prices are influencing the costs of transport. Something can be done only by reducing consumption. The steering axle greatly improve the performance of trailers and semi-trailers, especially over mixed routes, the motor vehicle is less stressed, and reuces fuel consumption. > Lower expenses for the tires. Thanks to steering axles tyres have a longer life: a double benefit for the carriers who drive more kilometres with a set of tyres and have less downtime, because steering axles save the tyre wear. Even recycled tires can be used with increased safety. > Smoother and safer drive. The characteristics of the steering axle are useful especially when great manoeuvrability and flexibility are required - for example in local traffic and of distribution: precise manoeuvres, less damage from bumps, more safety and efficiency. The device for the wheels’ alignment and pneumatic latch are an useful aid for precision and safety also when reverse driving. > ADR range of steering axle. BM Series for capacities up to 7,5 tons BT Series for capacities up to 12 tons BW series for capacities up to 15 tons BX series for capacities up to 22 tons, specific special vehicles for yard or harbour. R O A D R A N G E SELF STEERING AXLES WITH 300 MM DRUM BRAKE TWIN TWIN SINGLE OVERALL AXLE MINIMUM WEIGHT TYPE CAPACITY BRAKE WHEEL CONNECTION WHEEL FACE WHEEL WHEEL WIDTH BEAM WHEEL
    [Show full text]
  • Design, Analysis and Optimization of Anti-Roll Bar
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by Directory of Open Access Journals Pravin Bharane et al. Int. Journal of Engineering Research and Applications www.ijera.com ISSN : 2248-9622, Vol. 4, Issue 9( Version 4), September 2014, pp.137-140 RESEARCH ARTICLE OPEN ACCESS Design, Analysis and Optimization of Anti-Roll Bar Pravin Bharane*, Kshitijit Tanpure**, Amit Patil***, Ganesh Kerkal**** *,**,***,****( Assistant Professor, Department of Mechanical Engg., Dnyanganga College of Engg. & Research, Pune) ABSTRACT Vehicle anti-roll bar is part of an automobile suspension system which limits body roll angle. This U-shaped metal bar connects opposite wheels together through short lever arms and is clamped to the vehicle chassis with rubber bushes. Its function is to reduce body roll while cornering, also while travelling on uneven road which enhances safety and comfort during driving. Design changes of anti-roll bars are quite common at various steps of vehicle production and a design analysis must be performed for each change. So Finite Element Analysis (FEA) can be effectively used in design analysis of anti-roll bars. The finite element analysis is performed by ANSYS. This paper includes pre-processing, analysis, post processing, and analyzing the FEA results by using APDL (Ansys Parametric Design Language). The effects of anti-roll bar design parameters on final anti-roll bar properties are also evaluated by performing sample analyses with the FEA program developed in this project. Keywords: FEA, Anti Roll Bar, APDL, Design Parameters. I. INTRODUCTION Anti-roll bar, also referred to as stabilizer or ensure directional control and stability with adequate sway bar, is a rod or tube, usually made of steel, that traction and braking capabilities [1].
    [Show full text]
  • 2017 Nissan Rogue
    2017 ROGUE OWNER’S MANUAL and MAINTENANCE INFORMATION For your safety, read carefully and keep in this vehicle. FOREWORD READ FIRST—THEN DRIVE SAFELY Welcome to the growing family of new NISSAN cautions and instructions concerning proper use Before driving your vehicle, please read this owners. This vehicle is delivered to you with of such accessories prior to operating the vehicle Owner’s Manual carefully. This will ensure famil- confidence. It was produced using the latest and/or accessory. It is recommended that you iarity with controls and maintenance require- techniques and strict quality control. visit a NISSAN dealer for details concerning the ments, assisting you in the safe operation of your particular accessories with which your vehicle is vehicle. This manual was prepared to help you under- equipped. stand the operation and maintenance of your WARNING vehicle so that you may enjoy many miles (kilome- ters) of driving pleasure. Please read through this IMPORTANT SAFETY INFORMATION manual before operating your vehicle. REMINDERS! A separate Warranty Information Booklet Follow these important driving rules to explains details about the warranties cov- help ensure a safe and comfortable trip ering your vehicle. The “Maintenance and for you and your passengers! schedules” section of this manual explains ● NEVER drive under the influence of al- details about maintaining and servicing cohol or drugs. your vehicle. Additionally, a separate Cus- tomer Care/Lemon Law Booklet (U.S. only) ● ALWAYS observe posted speed limits will explain how to resolve any concerns and never drive too fast for conditions. you may have with your vehicle, and clarify ● ALWAYS give your full attention to driving your rights under your state’s lemon law.
    [Show full text]
  • Owner's Manual (2013 Hardtop / Clubman)
    Contents A - Z OWNER'S MANUAL MINI MINI CLUBMAN Online Edition for Part no. 01402917320 - © 10/12 BMW AG Cooper Congratulations on your new MINI Cooper S This Owner's Manual should be considered a permanent part of this vehicle. It should stay with the vehicle when sold to provide John Cooper the next owner with important operating, safety and mainte- Works nance information. We wish you an enjoyable driving experience. Online Edition for Part no. 01402917320 - © 10/12 BMW AG © 2012 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. US English X/12, 11 12 500 Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling. Online Edition for Part no. 01402917320 - © 10/12 BMW AG Contents The fastest way to find information on a particu- COMMUNICATIONS 155 lar topic or item is by using the index, refer to 156 Hands-free device Bluetooth page 252. 166 Mobile phone preparation Bluetooth 179 Office 187 MINI Connected 4 Notes 7 Reporting safety defects MOBILITY 191 192 Refueling AT A GLANCE 9 195 Wheels and tires 10 Cockpit 207 Engine compartment 16 Onboard computer 211 Maintenance 20 Letters and numbers 213 Care 21 Voice activation system 217 Replacing components CONTROLS 25 231 Giving and receiving assistance 26 Opening and closing REFERENCE 237 38 Adjustments 238 Technical data 44 Transporting children safely 245 Short commands for the voice activation 47 Driving system 57 Controls overview 252 Everything from A to Z 68 Technology for driving comfort and safety 81 Lamps 85 Climate 90 Practical interior accessories DRIVING TIPS 99 100 Things to remember when driving NAVIGATION 109 110 Navigation system 112 Destination entry 121 Route guidance 129 What to do if… ENTERTAINMENT 131 132 On/off and tone 135 Radio 143 CD player 145 External devices Online Edition for Part no.
    [Show full text]
  • A Novel Chassis Concept for Power Steering Systems Driven by Wheel Individual Torque at the Front Axle M
    25th Aachen Colloquium Automobile and Engine Technology 2016 1 A Novel Chassis Concept For Power Steering Systems Driven By Wheel Individual Torque At The Front Axle M. Sc. Philipp Kautzmann Karlsruhe Institute of Technology, Institute of Vehicle System Technology, Karlsruhe, Germany M. Sc. Jürgen Römer Schaeffler Technologies AG & Co. KG, Karlsruhe, Germany Dr.-Ing. Michael Frey Karlsruhe Institute of Technology, Institute of Vehicle System Technology, Karlsruhe, Germany Dr.-Ing. Marcel Ph. Mayer Schaeffler Technologies AG & Co. KG, Karlsruhe, Germany Summary The project "Intelligent Assisted Steering System with Optimum Energy Efficiency for Electric Vehicles (e²-Lenk)" focuses on a novel assisted steering concept for electric vehicles. We analysed different suspensions to use with this innovative power steering concept driven by wheel individual drive torque at the front axle. Our investigations show the potential even for conventional suspensions but reveal the limitations of standard chassis design. Optimized suspension parameters are needed to generate steering torque efficiently. Requirements arise from emergency braking, electronic stability control systems and the potential of the suspension for the use with our steering system. In lever arm design a trade-off between disturbing and utilizable forces occurs. We present a new design space for a novel chassis layout and discuss a first suspension design proposal with inboard motors, a small scrub radius and a big disturbance force lever arm. 1 Introduction Electric vehicles are a promising opportunity to reduce local greenhouse gas emissions in transport and increase overall energy efficiency, as electric drivetrain vehicles operate more efficiently compared to conventionally motorized vehicles. The internal combustion engine of common vehicles not only accelerates the vehicle, but also supplies energy to on-board auxiliary systems, such as power-assisted steering, which reduces the driver’s effort at the steering wheel.
    [Show full text]
  • Dinan Engineering Anti-Roll Bar
    ADJUSTABLE ANTI-ROLL BAR INSTALLATION INSTRUCTIONS PART NUMBER D120-0520 DESCRIPTION: Front 32mm; 3-hole adjustable APPLICATION: 2008-13 M3 (E90, E92, & E93) 2011 1-M Coupe (E82) ___________________________________________________________ PARTS LIST Qty Part # Description 1 D122-0520 Anti-roll bar 1 D133-0520 Hardware kit ___________________________________________________________ Congratulations for being selective enough to use a Dinan Engineering anti-roll bar. We have spent many hours developing this anti-roll bar to assure that you will receive maximum performance and durability with minimum difficulty in installation. Please take the time to read these instructions and call us if you have any difficulties during the installation. ___________________________________________________________ NOTES: a) We highly recommend that you first read and fully understand these instructions before beginning the installation. b) Some mechanical skill is required to install this kit. If you feel that you do not have the requisite skill or tools, please arrange for a qualified repair facility to perform the installation. c) Do not work on vehicles supported by a jack only. Use secure jack stands! ___________________________________________________________ INS133-0520 Page 1 of 4 Rev. 3/26/14 1. Jack up the front of the vehicle and place jack stands securely under the vehicle. 2. Note the orientation of the stock anti-roll bar. The Dinan bar will be oriented the same way. 3. Remove the stock anti-roll bar, bushings, brackets, and end links per BMW recommended procedure. These items will not be reused. 4. Install Dinan anti-roll bar using the supplied bushings and brackets. Lubricate the bushings with urethane grease (or an equivalent high-pressure, waterproof, grease).
    [Show full text]
  • 2019 Jeep Renegade Owner's Manual
    2019 Renegade OWNER’S MANUAL VEHICLES SOLD IN CANADA This manual illustrates and describes the operation of With respect to any Vehicles Sold in Canada, the name features and equipment that are either standard or op- FCA US LLC shall be deemed to be deleted and the name tional on this vehicle. This manual may also include a FCA Canada Inc. used in substitution therefore. description of features and equipment that are no longer DRIVING AND ALCOHOL available or were not ordered on this vehicle. Please Drunken driving is one of the most frequent causes of disregard any features and equipment described in this accidents. manual that are not on this vehicle. Your driving ability can be seriously impaired with blood FCA US LLC reserves the right to make changes in design alcohol levels far below the legal minimum. If you are and specifications, and/or make additions to or improve- drinking, don’t drive. Ride with a designated non- ments to its products without imposing any obligation drinking driver, call a cab, a friend, or use public trans- upon itself to install them on products previously manu- portation. factured. WARNING! Driving after drinking can lead to an accident. Your perceptions are less sharp, your reflexes are slower, and your judgment is impaired when you have been drinking. Never drink and then drive. Copyright © 2018 FCA US LLC SECTION TABLE OF CONTENTS PAGE 1 1 INTRODUCTION ...................................................................3 2 2 GRAPHICAL TABLE OF CONTENTS ......................................................7
    [Show full text]
  • FORMULA STEERING WHEEL User Manual
    FORMULA STEERING WHEEL User Manual Formula Steering Wheel User manual Release 1.02 To the owner of Formula Steering wheel The new Formula Steering Wheel belongs to the last generation of AIM dashes for car racings and provides the driver with an high technology steering wheel with an innovative design. With anodised chassis, ergonomically shaped, hand-woven suede covered the Formula Steering Wheel has a real “racing look”. Thanks to AIM ECT (Easy Connection Technology), the connection with AIM products and external expansion modules comes in a click. Formula Steering Wheel allows to monitor RPM, speed, engaged gear, lap (split) times and custom sensors. Formula Steering Wheel, moreover, is configurable with Race Studio 2 software, that can be freely downloaded from www.aim-sportline.com. www.aim-sportline.com 2 Formula Steering Wheel User manual Release 1.02 INDEX Chapter 1 – Characteristics and part number ........................................................ 4 1.1 – Part Number ............................................................................................................................... 4 Chapter 2 – How to connect Formula Steering wheel to EVO .............................. 5 2.1 – Connection with EVO3 Pro ....................................................................................................... 5 2.2 – Connection with EVO3 Pista/EVO4 .......................................................................................... 5 2.3 – Connection with other AIM peripherals ..................................................................................
    [Show full text]
  • 2020 Kia Soul Owner's Manual
    2020 Owner's Manual Owner's Manual | 영어/미국 WARNING – California Proposition 65 “Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.P65Warnings.ca.gov/passenger- vehicle.” FOREWORD Dear Customer, Thank you for selecting your new Kia vehicle. As a global car manufacturer focused on building high-quality vehicles with excep- tional value, Kia Motors is dedicated to providing you with a customer service experi- ence that exceeds your expectations. If technical assistance is needed on your vehicle, authorized Kia dealerships factory- trained technicians, recommended special tools, and genuine Kia replacement parts. This Owner's Manual will acquaint you with the operation of features and equipment that are either standard or optional on this vehicle, along with the maintenance needs of this vehicle. Therefore, you may find some descriptions and illustrations not applicable to your vehicle. You are advised to read this publication carefully and follow the instructions and recommendations. Please always keep this manual in the vehicle for your, and any subsequent owner's, reference. All information contained in this Owner's Manual was accurate at the time of publica- tion. However, as Kia continues to make improvements to its products, the company reserves the right to make changes to this manual or any of its vehicles at any time without notice and without incurring any obligations.
    [Show full text]
  • Design and Modification of Double Wishbone Suspension System in an ATV
    International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 07 Issue: 05 | May 2020 www.irjet.net p-ISSN: 2395-0072 Design and Modification of Double Wishbone Suspension System in an ATV *1Sumit Bhandarkar, 2Aashish Nagose, 3Dinesh Sharma, Vaibhav Bhasme 1-4 Mechanical Engineering, St. Vincent Pallotti College of Engineering & Technology -----------------------------------------------------------------------***-------------------------------------------------------------------- Abstract: This paper focuses and summarizes the project summary of Design and modification of double wishbone suspension system for an all-terrain vehicle which includes selection of necessary design parameters for the vehicle keeping in mind the track conditions that are typically faced. Focus was to make the front suspension of the vehicle lighter than the double wishbone setup yet it retains the characteristics of unequal double wishbone setup which may not be possible through MacPherson strut type of suspension setup. The overall carbon footprint for the vehicle is lower hence keeping it eco-friendlier. This vehicle has lesser components than a typical ATV implying that manufacturing and production costs are reduced. Therefore, the vehicle is cheaper than any other all-terrain vehicle. Keywords- suspension modeling , double wishbone, design optimization. 1) Introduction This paper in particular concentrates on the design of the suspension for an ATV, modifying the mounting factors, analysing of the forces that are to be damped with the aid of the suspension. Suspension gadget plays a vital role within the coping with of the vehicle. It allows the driver to manoeuvre the vehicle. The main feature of suspension is to ensure that the driver feels snug while riding the auto and the forces are damped to save you chassis from getting damaged.
    [Show full text]
  • Double Wishbone Suspension System; a Research
    International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-2, July 2019 Double Wishbone Suspension System; A Research Vignesh B S, Sufiyan Ahmed, Chandan V, Prashant Kumar Shrivastava Abstract: Advancements in science and technology, effective suspension is proportional to change in length of spring designs and newly advanced ways of manufacturing for the need where spring is either compressed or stretched based on to fulfill the customer expectations and to provide them better situation. Spring rate for a spring is defined as weight goods has let to these developments. With the invent and help of required for one inch deflection in spring, stiffer springs numerous mechatronic systems there is technological advancements in various automobile sectors and thus gave better require more weight and softer springs require less weight performance output A suspension system has responsibility of for unit inch of deflection. There are variable spring rates safety of both the vehicle and occupants by providing stability which can have both stiffer and softer spring rates in one and comfort ride during its maneuvers. Without the help of any spring called as progressive rate spring; suspension system, it would have made extremely hard for a driver to control a vehicle since all the shocks and vibrations would have been directly transmitted to steering without any damping. The main aim of this study to discuss about the designing and analysis of double wishbone suspension system for automobile. Keywords: Dependent Suspension, Independent Suspension, Double Wishbones, spring and Damper System I. INTRODUCTION Suspension is the system that connects vehicle body (chassis) to its wheels and allows relative motion between the two and hence isolating the vehicle from road shocks.
    [Show full text]
  • Steering Wheel
    L Steering wheel ADJUSTINGSteering wheel THE STEERING WHEEL The steering wheel can be adjusted for tilt and reach. 1. Turn the switch to the COLUMN or AUTO position. 2. Move the switch forwards or backwards to adjust reach. 3. Move the switch up or down to adjust tilt. Three steering wheel positions can be stored and recalled by the driver position memory system. See MEMORY FUNCTION (page 122). The message centre will indicate which switch position has been selected, by displaying the message COLUMN ADJUST or COLUMN ADJUST AUTO. Entry and exit mode Entry and exit mode provides automatic movement of the steering column to allow E91122 easier entry to or exit from the vehicle. Entry and exit mode is selected by setting the WARNING steering column adjustment switch to the Never adjust the steering wheel AUTO position. position whilst the vehicle is in Exit: If the ignition system is in the motion. Doing so will reduce control convenience mode position and the driver’s of the vehicle, and may cause unpredictable door is opened, the steering column will move steering movements. to the uppermost tilt position, unless already in that position. CAUTION Entry: When the door is closed and the Do not use steering wheel mounted START/STOP button is pressed, the steering security devices since movement of the column will return to the previous position. steering wheel in entry or exit mode could result in damage to the vehicle (e.g. the Notes on entry and exit mode operation windscreen) or possible injury to the • If the steering column switch is moved occupant.
    [Show full text]