GOVT. INDUSTRIAL TRAINING INSTITUTE An ISO 9001-2008 Certified Institution H.M.T COLONY P.O KALAMASSERY ERNAKULAM (DIST.)KERALA-683503 Phone 0484-2555505, [email protected] www.itikalamassery.kerala.gov.in

XobXn : 2 9 ബി3/2835/2017 Model ITI 7/0 /2017

പ്രിന്‍സിപ്പാള്

, 嵍 ഡയറ啍െര്ﴂട്പ്െയിനി

,嵍 ഡയറ啍്പ്െറ്റ്ﴂട്പ്െയിനി --..-- 695033 ﴂതിരുവനന്തരുര

സര് , ഗവ :ഐ.െി.ഐ കളമ്േരി- Model ITI ആക്കുതുമളയി -:ﴂവിഷയ ഭരണത്തിനളയി തയ്യളറളക്കിയﴂഘട്ട ഉരകരണ സ ﴂബട്പ്പാട്ട ര赍ള Tender ്നളട്ടീ വകുപ്പാ് ട്വ녍സസറ്റില് രരസയട്പ്പാെുത്തു配- ബിച്ച്ﴂസ

സൂചന:- i)SPIU/35652/14 നമ്പറളയ 26.08.2017-ട്ല State Project Director-ഉട്െ ഉത്തര핍. ii)G.O.(Rt) No.900/2017/LBR നമ്പറളയ 13.07.2017 –ട്ല Labour & Skills Department, Joint Secretary യുട്െ ഉത്തര핍.

Model ITI-യുമളയി (IInd Phase) ബട്പ്പാട്ട് ﴂമല് സൂചനക് പ്രകളര്

ഭരിക്കുതിനുള്ള ട്െന്ഡര് ്നളട്ടീ വകുപ്പാ് ട്വ녍സസറ്റില്ﴂഉരകരണങ്ങ് സ

അെിയന്തിരമളയി രരസയട്പ്പാെുത്തുതിꅍ ആവശ്യമളയ ്മല് നെരെി സവീകരിക്കണട്മ്

അ്രക്ഷിക്കുു.

വിശ്വതത്യളട്െ, H¸v/--þ {]n³kn¸mÄ

:

ട്െന്ഡര് ്നളട്ടീ ﴂഉള്ളെക്ക

GOVT. INDUSTRIAL TRAINING INSTITUTE An ISO 9001-2008 Certified Institution H.M.T COLONY P.O KALAMASSERY ERNAKULAM (DIST.)KERALA-683503 Phone 0484-2555505, [email protected] www.itikalamassery.kerala.gov.in

TENDER NO. B3/2835/2017 MODEL ITI DATED: 27.09.2017

TENDER NOTICE

Competitive tenders are invited from approved firms/companies/traders for the supply of tools, equipments, machineries for training purpose and various furnitures required for the upgradation of Govt. ITI Kalamassery into Model ITI.

Details of the tenders are attached herewith.

Sd/-

Principal

TENDER DETAILS FOR THE SUPPLY OF TOOLS, EQUIPMENTS, MACHINERIES AND VARIOUS FURNITURES - FOR THE UPGRADATION OF GOVT. ITI KALAMASSERY INTO MODEL ITI - Phase II

COST OF FORM IN Rs. (INCLUDING 12% GST) LAST DATE DATE AND Original Dupicate LAST DATE AND TIME EARNEST TENDER NO. TIME OF COST OF SL. AND TIME OF COST OF GST MONEY AND OPENING TOTAL TENDER TOTAL No OF SALE RECEIPT TENDER GST @ @12% DEPOSIT (EMD) ITEMS SEALED COST FORM COST OF TENDER OF SEALED FORM 12% (Rs.) (Rs.) (Rs.) TENDER (Rs.) (DUPLICATE) (Rs.) TENDER (Rs.) (Rs.)

A B C D E F G H I J K L

B3/2835/2017(1)MODEL ITI PACKAGE: 1 25.10.2017 25.10.2017 26.10.2017 1 FURNITURE - ALMIRAH 700 84 784 350 42 392 3745 /METAL RACK - 11.00A.M. 1.00PM 11.00A.M. Retender

B3/2835/2017(2)MODEL ITI PACKAGE: 2 25.10.2017 25.10.2017 26.10.2017 2 FURNITURE - TABLE/ WORK 1600 192 1792 800 96 896 10654 BENCH/STOOL 11.00A.M. 1.00PM 11.00A.M. Retender B3/2835/2017(5)MODEL ITI PACKAGE: 1 25.10.2017 25.10.2017 26.10.2017 3 FURNITURE - SMART CLASS 2000 240 2240 1000 120 1120 13650 ROOM 11.00A.M. 1.00PM 11.00A.M. Tender B3/2835/2017(11)MODEL ITI PACKAGE: 11 25.10.2017 25.10.2017 26.10.2017 4 1400 168 1568 700 84 784 7087 MEASURING INSTRUMENTS 11.00A.M. 1.00PM 11.00A.M. Retender

B3/2835/2017(13)MODEL ITI PACKAGE: 13 25.10.2017 25.10.2017 26.10.2017 5 1500 180 1680 750 90 840 7984 VICES 11.00A.M. 1.00PM 11.00A.M. Retender B3/2835/2017(17)MODEL ITI PACKAGE: 17 25.10.2017 25.10.2017 26.10.2017 6 TOOLS & EQUIPMENTS - 1500 180 1680 750 90 840 7300 INSTRUMENT MECHANIC 11.00A.M. 1.00PM 11.00A.M. Retender B3/2835/2017(22)MODEL ITI PACKAGE: 22 25.10.2017 25.10.2017 26.10.2017 7 TOOLS & EQUIPMENTS - 400 48 448 200 24 224 2000 WIREMAN 11.00A.M. 1.00PM 11.00A.M. Retender

B3/2835/2017(23)MODEL ITI PACKAGE: 23 25.10.2017 25.10.2017 26.10.2017 8 1400 168 1568 700 84 784 7000 D/CIVIL/SURVEYOR TOOLS 11.00A.M. 1.00PM 11.00A.M. Retender B3/2835/2017(26)MODEL ITI PACKAGE: 26 25.10.2017 25.10.2017 26.10.2017 9 700 84 784 350 42 392 3500 CARPENTRY TOOLS 11.00A.M. 1.00PM 11.00A.M. Retender B3/2835/2017(27)MODEL ITI PACKAGE: 27 25.10.2017 25.10.2017 26.10.2017 10 TOOLS & EQUIPMENTS- 1400 168 1568 700 84 784 7000 PAINTER GENERAL 11.00A.M. 1.00PM 11.00A.M. Retender B3/2835/2017(32)MODEL ITI PACKAGE: 32 25.10.2017 25.10.2017 26.10.2017 11 TOOLS & EQUIPMENTS- 1300 156 1456 650 78 728 6273 TURNER 11.00A.M. 1.00PM 11.00A.M. Retender B3/2835/2017(35)MODEL ITI PACKAGE: 35 25.10.2017 25.10.2017 26.10.2017 12 1000 120 1120 500 60 560 5000 CCTV CAMERA SYSTEM 11.00A.M. 1.00PM 11.00A.M. Retender B3/2835/2017(36)MODEL ITI PACKAGE: 36 25.10.2017 25.10.2017 26.10.2017 13 1500 180 1680 750 90 840 7453 FITTER TOOLS 11.00A.M. 1.00PM 11.00A.M. Retender B3/2835/2017(38)MODEL ITI PACKAGE: 38 25.10.2017 25.10.2017 26.10.2017 14 1500 180 1680 750 90 840 7441 GAUGES 11.00A.M. 1.00PM 11.00A.M. Retender

B3/2835/2017(39)MODEL ITI PACKAGE: 39 25.10.2017 25.10.2017 26.10.2017 15 1500 180 1680 750 90 840 7263 GAUGES 11.00A.M. 1.00PM 11.00A.M. Retender

B3/2835/2017(40)MODEL ITI PACKAGE: 40 25.10.2017 25.10.2017 26.10.2017 16 1500 180 1680 750 90 840 7570 DRILLS, TAP & DIE 11.00A.M. 1.00PM 11.00A.M. Retender

B3/2835/2017(42)MODEL ITI PACKAGE: 42 25.10.2017 25.10.2017 27.10.2017 17 700 84 784 350 42 392 3660 AIR CONDITIONER 11.00A.M. 1.00PM 11.00A.M. Retender

B3/2835/2017(49)MODEL ITI PACKAGE: 49 25.10.2017 25.10.2017 27.10.2017 18 1300 156 1456 650 78 728 6692 CARPENTRY TOOLS 11.00A.M. 1.00PM 11.00A.M. Tender

B3/2835/2017(50)MODEL ITI PACKAGE: 50 25.10.2017 25.10.2017 27.10.2017 19 900 108 1008 450 54 504 4535 CIVIL & SURVEYOR ITEMS 11.00A.M. 1.00PM 11.00A.M. Tender

B3/2835/2017(51)MODEL ITI PACKAGE: 51 25.10.2017 25.10.2017 27.10.2017 20 1500 180 1680 750 90 840 7410 ELECTRONIC ITEMS 11.00A.M. 1.00PM 11.00A.M. Tender

B3/2835/2017(52)MODEL ITI PACKAGE: 52 25.10.2017 25.10.2017 27.10.2017 21 1500 180 1680 750 90 840 9741 ELECTRICAL ITEMS 11.00A.M. 1.00PM 11.00A.M. Tender B3/2835/2017(53)MODEL ITI PACKAGE: 53 25.10.2017 25.10.2017 27.10.2017 22 1600 192 1792 800 96 896 10630 ELECTRICAL ITEMS 11.00A.M. 1.00PM 11.00A.M. Tender

B3/2835/2017(54)MODEL ITI PACKAGE: 54 25.10.2017 25.10.2017 27.10.2017 23 1800 216 2016 900 108 1008 12192 FITTER TOOLS 11.00A.M. 1.00PM 11.00A.M. Tender

B3/2835/2017(55)MODEL ITI PACKAGE: 55 25.10.2017 25.10.2017 27.10.2017 24 1800 216 2016 900 108 1008 11773 FITTER TOOLS 11.00A.M. 1.00PM 11.00A.M. Tender

B3/2835/2017(56)MODEL ITI PACKAGE: 56 25.10.2017 25.10.2017 27.10.2017 25 GRINDING & WELDING 1700 204 1904 850 102 952 11162 MACHINES 11.00A.M. 1.00PM 11.00A.M. Tender B3/2835/2017(57)MODEL ITI PACKAGE: 57 25.10.2017 25.10.2017 27.10.2017 26 MECHANIC MOTOR VEHICLE 1200 144 1344 600 72 672 5950 - TOOLS & EQUIPMENTS 11.00A.M. 1.00PM 11.00A.M. Tender B3/2835/2017(58)MODEL ITI PACKAGE: 58 25.10.2017 25.10.2017 27.10.2017 27 1500 180 1680 750 90 840 9068 MRAC - EQUIPMENTS 11.00A.M. 1.00PM 11.00A.M. Tender

B3/2835/2017(59)MODEL ITI PACKAGE: 59 25.10.2017 25.10.2017 27.10.2017 28 TOOLS & EQUIPMENTS- 1300 156 1456 650 78 728 6521 PAINTER GENERAL 11.00A.M. 1.00PM 11.00A.M. Tender B3/2835/2017(60)MODEL ITI PACKAGE: 60 25.10.2017 25.10.2017 27.10.2017 29 TOOLS & EQUIPMENTS- 1100 132 1232 550 66 616 5269 INSTRUMENT MECHANIC 11.00A.M. 1.00PM 11.00A.M. Retender

B3/2835/2017(67)MODEL ITI PACKAGE: 67 25.10.2017 25.10.2017 27.10.2017 30 800 96 896 400 48 448 4196 ELECTRONIC ITEMS 11.00A.M. 1.00PM 11.00A.M. Tender

B3/2835/2017(71)MODEL ITI PACKAGE: 71 25.10.2017 25.10.2017 27.10.2017 31 400 48 448 200 24 224 2032 FIRE EXTINGUISHERS 11.00A.M. 1.00PM 11.00A.M. Tender

The cost of the tender forms will be accepted only by Cash or Money Order. The Tender should be super scribed with Tender number and date addressed to The Principal, Govt. ITI Kalamassery, HMT ColonyP.O, Kalamassery- 683503. Late Tenders will not be accepted. The above mentioned amount should be enclosed as Earnest Money Deposit. There must be a Validity period of three months from the date of opening the Tenders. Otherwise the Tenders will be summarily rejected. The tenders in original should be accompanied with preliminary agreement in Kerala Stamp Paper worth Rs. 200/- (Rupees. Two Hundred only), Otherwise the Tender will not be considered. Detailed Specification of items required can be obtained from the office of the undersigned during office hours. The tendered items having ISI/BIS specification will be given priority. The details are available in the website www.det.kerala.gov.in, www.itikalamassery.kerala.gov.in.

sd/- PRINCIPAL Govt. ITI Kalamassery PACKAGE - 1 FURNITURE - ALMIRAH /METAL RACK

Sl.No: NAME OF ITEM (With detailed specification) QUANTITY

1 Steel almirah 2500x1200x500 mm 18 SWG 8

Metal Rack (1800x1500x450mm) 2 12 Verticals 16 SWG slotted, Plate with ribs 18 SWG

Metal rack 1000 x 1500 x 450 mm 3 16 Verticals 16 SWG slotted, Plate with ribs 18 SWG

Computer chair - armed (Revolving type metal based & wheel 4 33 standard one)

5 Garden chair. Stainless, three seater 4 PACKAGE - 2 FURNITURE - TABLE / WORK BENCH / STOOL

Sl.No: NAME OF ITEM (With detailed specification) QUANTITY

Demonstration table Full Aangili wood, 2500 x 1250 x 750 mm 1 Leg - 3" Sq; Motise and tennon joint, top rail 3" X 1.5", bottom rail 2" 8 X 1.5", Top plank 2" thick

Electronic work table wooden 2 2' width X 8' length X 2.5' height with drawers 4 nos, screen swithch 14 board socket with fuse, light fitting (tube) 4 nos. Drawing attached

Desk 6' X 4' angili wood, leg 3" sq; mortise and tennon joint, Top 3 4 plank 1" thick , top rail 3" X 1.5", bottom rail 2" X 1.5"

Aanjili wood Working Bench 2500 x 1200 x 750 mm. 6 leg, Leg - 3" 4 Sq; Motise and tennon joint, top rail 3" X 2", bottom rail 3" X 2", Top 20 plank 2" thick.

Aanjili wood Work bench 2500 x 1200 x 600 mm. 6 leg, Leg - 3" Sq; 5 Motise and tennon joint, top rail 3" X 2", bottom rail 3" X 2", Top 4 plank 2" thick.

Work bench (2000 x1000 x 700 mm with 2” A-class pipe frame. 6 6 Top with 2" teak slab and fixing with3/4” good quality rubber sheet.)

Aanjili wood Carpenter work bench 2400X960X800mm 6 leg, Leg - 7 3" Sq; Motise and tennon joint, top rail 3" X 2", bottom rail 3" X 2", 2 Top plank 2" thick,

work Bench 2400 x 1200 x 900 mm. Angili wood, 6 leg, Leg - 3" 8 Sq; Motise and tennon joint, top rail 3" X 2", bottom rail 3" X 2", Top 5 plank 2" thick

Discussion Table/ Working Table = L:W:H = 8:4:3 Feet - Heavy 9 Wooden Top, 6 leg, Leg - 3" Sq; Motise and tennon joint, top rail 3" 1 X 2", bottom rail 3" X 2", Top plank 2" thick

Table (Big size) 6 feet x 4 feet, Leg - 2" Sq; Motise and tennon joint, 10 top rail 3" X 1.5", bottom rail 2" X 1.5", Top plank 1" thick, one shelf 1 and one drawer in two end

High stool wooden teak wood 450 x 350 x 750 mm, Leg - 2" Sq; 11 Motise and tennon joint, top rail 2.5" X 1", bottom rail 2" X 1", Top 42 plank 1" thick PACKAGE - 5 FURNITURE - SMART CLASS ROOM FURNITURE

Sl.No: NAME OF ITEM (With detailed specification) QUANTITY

Student wooden chair with writing pad and shelf. 1 210 Angili wood PACKAGE 11 MEASURING INSTTRUMENTS

Sl.no. NAME OF ITEM (With detailed specification) Total

Outside micrometer 0-25 mm with perfect flat (3mm) carbide measuring faces, Baked enamel finish frame , ratchet thimble and 1 precision grounded thread on spindle. Least count 0.01 mm, accuracy 17 ±2 µm with all accessories with NABL accredited calibration certificate Outside micrometer 25-50 mm with perfect flat (3mm) carbide measuring faces, Baked enamel finish frame ,ratchet thimble and 2 precision grounded thread on spindle. Least count 0.01 mm, accuracy 25 ±2 µm with all accessories with NABL accredited calibration certificate Outside micrometer 50-75 mm with perfect flat (3mm) carbide measuring faces, Baked enamel finish frame ,ratchet thimble and 3 precision grounded thread on spindle. Least count 0.01 mm, accuracy 6 ±3 µm with all accessories with NABL accredited calibration certificate Outside micrometer 75-100 mm with perfect flat (3mm) carbide measuring faces, Baked enamel finish frame ,ratchet thimble and 4 precision grounded thread on spindle. Least count 0.01 mm, accuracy 1 ±3 µm with all accessories and NABL accredited calibration certificate Micrometer inside 25 - 50 mm with extension rods up to 150 mm. 5 Least count 0.01 mm, accuracy ±2 µm with all accessories with 17 NABL accredited calibration certificate

Depth micrometer 0 - 150 mm with hardened steel extension rods 6 range 25 mm. Least count 0.01 mm, accuracy ±2 µm with all 19 accessories with NABL accredited calibration certificate

Digital Micrometer 0 – 25 mm outside with carbide measuring faces, 7 ratchet thimble. L.C. 0.001 mm and accuracy ±2 µm, LCD display 9 with NABL accredited calibration certificate Digital Micrometer 25 – 50 mm outside with carbide measuring faces, 8 ratchet thimble. L.C. 0.001 mm. with NABL accredited calibration 3 certificate Screw thread micrometer 0-25mm with interchangeable anvil and spindle for checking metric threads 600. Baked enamel finish frame 9 1 with NABL accredited calibration certificate Leat count :0.02mm, accuracy ±2 µm with NABL accredited calibration certificate Vernier Micrometer 25-50mm outside,least count 0.001mm with perfect flat (3mm) carbide measuring faces, ratchet thimble and 10 9 precision grounded thread on spindle with NABL accredited calibration certificate Vernier Micrometer outside 0- 1 inch,least count 0.0001inch with perfect flat (3mm) carbide measuring faces, Baked enamel finish 11 8 frame , ratchet thimble and precision grounded thread on spindle with NABL accredited calibration certificate Inside caliper spring joint 150 mm polished tool steel 12 256 or stainless steel,Points fully hardened/tempered Inside calipe spring joint 200 mm polished tool steel 13 4 or stainless steel .Points fully hardened/tempered Out side calipe spring joint 150 mm polished tool steel or stainless 14 183 steel. Points fully hardened/tempered Out side calipe spring joint 200 mm polished tool steel or stainless 15 4 steel. Points fully hardened/tempered

Jenny caliper spring joint 150 mm with hardened steel legs .Points 16 198 fully hardened/tempered

17 Jenny caliper firm joint 150 mm with hardened steel legs 69 Try square 200 mm blade accuracy 0.002mm/10 mm length with 18 46 marking on blade Try Square 150 mm blade accuracy 0.002mm/10 mm length with 19 115 marking on blade Engineers square(150mm with 5' tolerance) accuracy 0.002mm/10 20 8 mm length Engineer"s try square (knife/bevel edge) 150 mm blade. accuracy 21 1 0.002mm/10 mm length

22 Try Square 100 mm blade. accuracy 0.002mm/10 mm length 94 PACKAGE 13 VICES

Sl.no. NAME OF ITEM (With detailed specification) Quantity

1 Saw sharpening vice 250mm jaw heavy duty 2 2 Pipe vice 100 mm. Model No. SG 1128 23 3 Hand Vice 50 mm jaw IS 7958 (1976) forged steel spring loaded 27 Machine vice 100mm. IS 4502 (1999) Deluxe model fitted with steel 4 31 bush Machine vice (Plane) 100 mm for bench drilling machine 5 IS 4502 (1999) 100 mm precision flat pliers, drill machine special 1 vice, angle bench vice for bench drill machine

6 Machine vice 150mm. IS 4502 (1999) Deluxe model. 3

Machine vice 200 mm swivel base IS 4502 (1999) machine vice with swivel base type also available 7 4 complete with a swivel base designed for milling, planing and drilling applications. Graduated to 1°

Tools makers vice 100 mm (clamp) Produced of high quality steel, 8 2 carburized to surface hardness HRC 58 - 62

Tools maker vice 75 mm (clamp) 9 Produced of high quality steel, carburized to surface hardness HRC 58 2 - 62 Tools maker vice 50 mm (clamp) 10 Produced of high quality steel, carburized to surface hardness HRC 58 4 - 62 11 Compound angle vice (standard sine). 100 mm 2 Bench vice 150mm 12 IS 2586 (1986) bench vice (heavy duty, weight 18 kg with phosphers 61 bronze box nut)

13 Carpenter's vice 250 mm jaws 57

Vice leg 10 cm jaw. 14 Antique 4" jaw, open 6" - 8" weight 32 pounds, overall length 42" , 16 17.5" wide. 9" depth post to end hole of bracket . Good condition

Bench vice(300mm jaw) IS 2586 (1986) High quality grey cast iron body and sliding jaws. 15 10 Hardened steel replaceable jaw plates. Fixing hole for bench mounding. PACKAGE - 17 INSTRUMENT MECHANIC

Sl.no. NAME OF ITEM (With detailed specification) Total

Pneumatic and electonic recorders (single point and multi point) both circular and strip chart types 1 1) Single pen recorder, 2) Pen - disposible fiber tipped, 3) Power 1 supply - 110 to 220 V AC 50 to 60Hz, 4) Pneumatic connection - ¼" female brass standard, 5) Air supply - 20 PSI

Paperless LCD/LED recorder setup 1) Screen size - 6.7", 2) Number of input - upto 12, 3) Display - colour 2 1 LED, 4) Data storage - SD card/ USB, 5) Instrument power - 250 V AC/ 12 to 30 V DC

PID controller trainer consisting of instrument panel, digital computer 3 1 and interface system

Training kits or trainers as avilable on microprocessors applicable to 4 process control and instrumentation and accessories 1 Training kits of µp 8085 and 8086

HART/Field devices (pressure/ flow/level) 5 1) 4 - 20 mA cimmunication, 2) PC programmeble, 3) Pressure, flow 1 and level sensing, 4) HART type device PACKAGE - 22 WIREMAN

Sl.no. NAME OF ITEM (With detailed specification) Total

Air circuit breaker (Drow out type) 3φ, 3 pole, 600V/400A, 4 wire, 50 Hz, with standard trip unit, over current and earth fault protection, control voltage - 230V, AC with 1 1 indoor type, free standing enclossure, incoming and out going cable connection (bottom and top). siemens grey colour. Preferable make - ABB/GE/Merlin gerin/ Siemens.

Sulphur Hexa fluride (SF₆) Circuit breaker (Drow out type) 3φ, 3 pole, 11KV/400A, 4 wire, 50 Hz, with standard trip unit, over current and earth fault protection, control voltage - 230V, AC with 2 1 indoor type, free standing enclossure and provision for incoming and out going cable connection (bottom and top). siemens grey colour. Preferable make - ABB/GE/Merlin gerin/ Siemens. PACKAGE - 23 CIVIL & SURVEYOR

Sl.no. NAME OF ITEM (With detailed specification) Total

Digital Theodolite latest model with all accessories ( Features :-Based on laser technology, Two large LCD panel with easy to read, 1 2 Automattically compensates tilt in two direction and compensates vertical angles. High integrated electronic board and IC elements)

Instrument for Total Station with latest model,with allaccessories (Graphic LCD disply on both side. Multy function key board on both 2 side. Able to interchange data between GPS and total station without 1 any dataconversion. Minimum 8 hours rechargeable li-ion battery. Poles and prism 2 Nos. each PACKAGE - 26 CARPENTRY

Sl.no. NAME OF ITEM (With detailed specification) Total

Lathe, wood turning 150 mm height of centres 1.75M Bed motorised 1 complete with a set of turning tools. Centre distance 1500 mm, bed 2 length 1750 mm, 3 HP motor, 3 phase

Universal wood working machine. Bed length 72", centre height 8", 2 length between centre 48", spindle speed 700/1400/2800, power 1 HP, 1 1440 RPM, single phase PACKAGE - 27 PAINTER GENERAL

Sl.no. NAME OF ITEM (With detailed specification) Total

Airless spray-gun with complete accessories and installion charge (WAGONR) Ratio : 1 : 30, 1 : 45, 1 : 65, 1 : 75 1 1 Fluid output :Range 5 - 16 liter/min, Air pressure : 7 Kgf/cm2 , H P Paint hose assembly : Max 500 Kgf/cm2 Paint filter : High pressure, Mounting : Trolly mounting

Electrostatic spray-gun with complete accessories Dual colo -800-D-2 and installion charge Liquid Electrostatic Spray Gun Input voltage : 0 - 70 KV DC(-),Gun length : 225 mm, Gun weight : 470gm, Fluid and air pressure : 0 - 7 Kg/cm2, Operating pressure : air supply, Coatings : solvent - base & waterborne coating Electrostatic Power supply Out voltage : 0 - 70 KV DC(-), Out current : 50 microamperes, Input voltage : 110 -240V AC (50 Hz), Intercepting current : 20 - 150 microamperes, Weight : 12 Kg, Dimensions : 300 X 120 X 350 mm 2 1 (L x W x H) Round (TIN) Nozzle Gauge : 22 mm, Auomatic air pressure : 4 - 6 PSI, Flow rate : 20 - 300 ml/min, Fan pattern width : 70 mm, Air : 180 NI/ min. Round (FRP) Nozzle Gauge : 12 mm, Auomatic air pressure : 4 - 6 PSI, Flow rate : 50 - 300 ml/min, Fan pattern width : 160 mm, Air : 180 NI/ min. Flat (FRP) Nozzle Gauge : 3 mm, Auomatic air pressure : 4 - 6 PSI, Flow rate : 100 - 400 ml/min, Fan pattern width : 300 mm, Air : 180 NI/ min. pressure feed container 20 liter capacity Capacity : 20 liter, Clamp on lid with gasket, fluid pressure regulator with gauge, Paint tank operating pressure : 25 - 30 PSI, Hose assembly : 10 feet air and fluid hoses, Air inlet : ¼", Fluid inlet : ⅜", Air 3 pressure relief valve for safety 1 Heavy duty pressure feed spray gun Standard nozzle : 1.5 mm, Operating pressure : 45 - 60 PSI (3 - 4 bar), Pattern width : 180 - 230 mm, Air consumption : 170 - 250 ltr/min. (6 - 8.8 CFM)

Dry wash spary booth External size (L x W x H) 7050 X 4050 X 3250 mm 4 Internal size (L x W x H) 6900 X 3900 X 2600 mm 1 Power - 35 KW, Voltage - 440 V, Exhaust blower capacity - M3 / Hr, Motor power - 5 HP, Phase - 3Ø, Tube lights PACKAGE - 32 TURNER

Sl.no. NAME OF ITEM (With detailed specification) Total

Parting tool holder 1 36 Straight 1" to 1⅛" size with HSS blade ⅛" X ⅝" X 5" size

2 Tool bits HSS ½" X ½" X 6" S400 - T 42 45

Tool cemented carbide assortted shaped (external)for steel turning-set of 12 nos with holder in a box Tool holder PCLNR25Z5MIZ (WIDIA 3 3 company), turning, facing, parting tool holder tip MIZCNMG 120408 (WIDIA) in a box

Collpsible Tap with attachment 4 MT 3 shank collet capacity up to 20 mm with safety clutch. Float 6 radial parallel compensation and length compensation

Shell end mill Ø100 X 50 X Ø 27 mm inserted tip type, with two set 5 4 of tips Shell end mill Ø50 X 36 X Ø 27 mm inserted tip type, with two set of 6 4 tips

Parallel shank end mills Ø6 mm, Ø10 mm and Ø16 mm are (double 7 4 fluted) Ø 20 mm and Ø25 mm (four fluted) HSS, Addison or equilant

Lathe tools H.S.S. tipped set having the following tools A) Grooving tool (External) Width 4mm B) Grooving tool (Internal) Width 4mm 8 C) Turning tool LH 16 D) Turning tool RH E) Boring tool (min. 20 mm Bore dia.) F) Facing tool

9 Lathe tools bit HSS ¼" x ¼" x 3" S 400 T 42 44

10 Lathe tools bit HSS ⅜" x ⅜" x 3" S 400 T 42 32

11 Lathe tools bit HSS ½" x ½" x 4" S 400 T 42 44

12 Arm strong type tool bit holder R.H. 24 13 Arm strong type tool bit holder L.H. 24

14 Arm strong type tool bit holder straight. 16

15 Shaper tool holder turret type 4

16 Boring tool holder 6mm sq tool bit, industrial purpose 45

17 Knurling tool revolving head (rough,medium,fine) straight 2

18 Knurling tool revolving head (rough,medium,fine) Diamond 2

19 Cylindrical cutter ø 80 X 90 X ø 27 mm HSS, Addison or equilant 4

20 Side and face cutter ø 80 X 8 X ø 27 mm HSS, Addison or equilant 4

21 4 Side and face cutter ø 160 x 10 x ø 27 mm HSS, Addison or equilant

22 2 Side and face cutter ø 100 x 10 x ø 27 mm HSS, Addison or equilant

23 Slitting saw cutter Ø100 x 3 x Ø27 mm HSS, Addison or equilant 2 PACKAGE - 35 OFFICE Sl.no. NAME OF ITEM (With detailed specification) Total

CCTV Camera system 1. HD DVR 32 channel - 1No. 2. 4 TB HDD -2 Nos. 3. HD IR camera 2 MP, 40 meters - 30 Nos. 2 4. Adapter 12V, 5Amp. - 30 Nos. 1 5. Video balun - 30 Nos. 6. 32" / 40" HD LED TV - 1 No. 7. Cable connecting accessories 8. Internet connectivity PACKAGE - 36 FITTER TOOLS Sl.no. NAME OF ITEM (With detailed specification) Total

1 V-Block pair 70 mm with clamps IS :2949 14 2 V-Block pair 150 mm with clamps IS :2949 14 3 V- Block 75 x 38 mm pair with Clamps IS :2949 5 4 V block with clamps 80/7-63A IS 2949 2 5 Swage block 350 x 350 x 120 mm. 8 6 Anvil 50 kg. 14

7 Angle plate 100 x 200 x 100 mm. IS 6973 19

8 Angle plate adjustable 250 x 150 x 175 mm IS 6973 6

9 Universal table angle plate IS 6973 2

10 Angle plate with slot 200mm IS 6973 10

11 Marking off table 1200 x 1200 x 900 mm high 2 Ball pain hammer250 gms. With wooden handle ( IS 841:1983 and IS 12 240 4953:1989) Ball peen hammer0.22 kg. With wooden handle ( IS 841:1983 and IS 13 135 4953:1989) Ball peen hammer 1 kg With wooden handle ( IS 841:1983 and IS 14 50 4953:1989) Ball peen hammer 750g With wooden handle ( IS 841:1983 and IS 15 16 4953:1989) Ball pein hammer 50 grms With wooden handle ( IS 841:1983 and IS 16 44 4953:1989) Ball pein hammer 800 grms With wooden handle ( IS 841:1983 and 17 15 IS 4953:1989) Ball peen hammer 500gm With wooden handle ( IS 841:1983 and IS 18 233 4953:1989) Ball pein hammer 600 gm With wooden handle ( IS 841:1983 and IS 19 40 4953:1989) Bossing Mallet 0.5 Kg With wooden handle ( IS 841:1983 and IS 20 8 4953:1989) carpenters hammer 250g With wooden handle ( IS 841:1983 and IS 21 42 4953:1989) Chipping hammer 250gm With handle ( IS 841:1983 and IS 22 56 4953:1989) claw hammer 250g With wooden handle ( IS 841:1983 and IS 23 38 4953:1989) Claw Hammer 500gm With wooden handle ( IS 841:1983 and IS 24 3 4953:1989) Cross peen hammer 600gm with handle ( IS 841:1983 and IS 25 46 4953:1989) Cross Peen Hammer 250 gm with handle ( IS 841:1983 and IS 26 21 4953:1989) 27 End facked Mallet 0.5 Kg ( IS 1106 and IS 4953:1989) 8

28 Hammer copper 1 Kg with handle 8

29 Hammer copper/brass 500g with handle 34 30 Hammer cross Peen 0.50 kg. ( IS 841:1983 and IS 4953:1989) 19 31 Hammer lead 1 kg. 4 32 Mallet (wooden) cylindrical or square( IS 1106 and IS 4953:1989 2 33 Hammer Plastic 500 gm 8 34 Hammer smith 2 kg. With handle. ( IS 841:1983 and IS 4953:1989) 16

35 Hand hammer 1 kg with handle ( IS 841:1983 and IS 4953:1989) 20 Hollowing Hammer with handle 2 Kg ( IS 841:1983 and IS 36 8 4953:1989) 37 Mallet medium size ( hindalium type)( IS 1106 and IS 4953:1989) 41 38 Mallet hard wood 0.50 kg ( IS 1106 and IS 4953:1989) 61 39 Mallet wooden 4"×200gm( IS 1106 and IS 4953:1989) 41 40 Planishing hammer 2 Kg 16 41 Plumbing hammer weight(200 gms) 4

42 Raising hammer with handle 2 Kg 8

43 Setting hammers with handle. 16

44 Soft hammer (Brass, copper, Lead) 500 gm 8

45 Wooden mallet 1kg.(75mm x15mm) ( IS 1106 and IS 4953:1989) 4

46 Wooden mallet /Nylon mallet(500gm wood finish) 10

47 Hammer Block with handle 2 Kg 2 48 Card file. 52 49 Universal surface gauge 150 mm arm 64 50 Universal surface gauge 250 mm arm 14 51 Universal surface gauge 300 mm arm 2

52 Carbide Wear Block 1 mm – 2 mm. 16 PACKAGE - 38 GAUGES

Sl.no. NAME OF ITEM (With detailed specification) Total

1 Gauge, wire imperial SWG 0 to 36 14

Feeler gauge 10 blades(Hardened and tempered tool steel.) 2 8 0.1 to 1 mm Feeler gauge 20 blades metric 0.05 - 1 mm((Hardened and tempered 3 11 tool steel.)

Screw pitch gauge for metric pitches (0.5-6 mm) ((Hardened and 4 12 tempered tool steel.)

5 Screw pitch gauge BSW IS 9610-1981, 55°, 30 leaves, 4 to 42 TPI 3

6 Srew Pitch gauge BSF IS 9610-1980, 55°, 30 leaves, 4 to 42 TPI 1

7 Screw pitch gauge B.A. (Full set)- (0 to 6 BA), 47.5° 2

8 Standard wire Gauge 0 - 36 SWG 14

Slip Gauge as Johnson metric set. 87 pieces With( NABL Acridited 9 14 Certficate and inspection Report) Grade 2

10 Gauge snap Go and No Go 25 to 50 mm by 5mm. Set of 6 pcs. 4

11 Gauge plug single ended 5 to 55 by 5 mm. Set of 11 pcs. 4

12 Plain plug gauge 12 to 50 mm by 1mm set 2

13 Limit plug gauges 5 mm to 25 mm by 2.5 mm set 2

14 Gauge telescopic upto 150 mm. 8 mm to 150 mm (set of 6) 2

15 Telescopic gauge 13 mm to 300 mm 8

16 Radius and fillet gauge leaf type 1 to 15 mm 1

17 Radius and fillet gauge leaf type 1 to 7 mm, 34 pair 17

18 Radius and fillet gauge leaf type 7.5 to 15 mm, 32 pair 17

19 Ring gauges 5 mm to 25 mm by 2.5 mm (Go & No Go) set 3 PACKAGE - 39 GAUGES

Sl.no. NAME OF ITEM (With detailed specification) Total

Plain ring gauge 12 to 50 mm by 1mm with NABL calibration 1 2 certificate

2 Wire type strain gauge (load cell) instruments 2

3 Wire type strain gauge(cantilever beam) instruments 2

Bourdon tube type pressure gauges of various ranges dial type 4 2 0-100 Kg/cm2, 0-10 Kg/cm2 (1 each) Capsule type pressure gauges dial type 0-1 bar, 0-10 bar, 5 3 0-25bar (1 each)

6 Diaphragm type pressure gauges of various ranges 0-1 bar 2

Diaphragm type pressure gauges of various ranges 0-100 millibar, 0- 7 2 250 millibar (1 each)

8 Pressure transducer training kit,straingauge 1

Low pressure measuring gauges such as thermal conductivity gauge 9 1 and Mcloyd gauge dial type

10 Vacuum gauge 100 mm dial bourdon tube type, 0-760 mm of Hg 2

Level measurment equipments for solid ,sonic solid level,microwave,capacitance probes,dighram switches,nuclear 11 1 gauge,sonic and microwave solid level detectors point level detectors,conductivity type

12 Bevel gauge 200 mm hardnened S Steel 2

Morse Taper plug gauge M.T. No. 0 - 6 as per IS standard with 13 4 calibration certificate Morse Taper ring gauge M.T. No. 0 - 6 as per IS standard with 14 4 calibration certificate 15 Planer gauge standard size, 100-150 mm length 2

16 Belt Tensioner gauge dial type 2

Compression testing gauge suitable for diesel Engine with standard 17 1 accessories with calibration certificate

18 Cylinder bore gauge capacity 20 to 160 mm 3 Dial test indicator 1 Gr. A (complete with clamping devices and with 19 3 magnetic stand)

20 Drill point angle gauge 16 21 Straight edge gauge 2 ft. with calibration certificate 4

22 Straight edge gauge 4 ft. with calibration certificate 4

23 Temperature gauge with sensor 0-1000 C dial type 2 24 Tyre pressure gauge with holding nipple dial type 4 25 Vacuum gauge to read 0 to 760 mm of Hg. Dial type 1

26 Capillary plug gauge 2

27 Pressure gauge Digital type(Dia 63mm with recalibration set) 10

Compound gauge, Digital type(Dia 63 mm with recalibration set 28 10 screw, scale vacuum 76mm,pressure 15 Kg/sq.cm)

Bore dial gauge stems 18 to 35mm, 35 to 60mm, dial gauge indicator 29 6 0.01mm mitutoyo or equalent with calibration certificate

30 Centre gauge 60 degree 25

31 Centre gauge 55 degree 25

32 Centre gauge 29 degree 5 PACKAGE - 40 DRILLS, TAP & DIE

Sl.no. NAME OF ITEM (With detailed specification) Total

Metric taps and dies complete set in box 3-18 mm set of 10. High 1 speed steel hadened and tempered. With adjestable tap wrenches and 7 die holders. (Totem/Miranda preferred) Adjustable pipe tap set BSP with die set cover pipe size 15, 20, 25,32,38,50 mm. High speed steel hadened and tempered. With 2 8 adjestable tap wrenches and die holders.(Totem/Addison/Miranda preferred) Tap & die set BSF up to 1 inch. High speed steel hadened and 3 tempered. With adjestable tap wrenches and die holders. 2 (Totem/Addison/Miranda preferred) Tap & die set BSW up to 1 inch High speed steel hadened and 4 tempered. With adjestable tap wrenches and die holders. 6 (Totem/Addison/Miranda preferred) Taps and dies complete set in box B.A 0 - 10 High speed steel 5 hadened and tempered. With adjestable tap wrenches and die holders. 7 (Totem/Addison/Miranda preferred) Metric tap set with matching drills (3mm to 16mm) High speed steel 6 hadened and tempered. With adjestable tap wrenches and die holders. 6 (Totem/Addison/Miranda preferred)

7 BSW tap set with matching drills (1/4"to 5/8") 4 Tap & Die set - to cut BSW threads of sizes 1/4, 5/16, 3/8,7/16,1/2, 8 5/8,3/4" High speed steel hadened and tempered. With adjustable tap 1 wrenches and die holders. Tap & Die set - to cut Matric threads of sizes M6-M12 High speed 9 steel hadened and tempered. With adjestable tap wrenches and die 1 holders.

Taps and Wrenches (BSP) sizes covered to suit pipes of bore dia 10 4 6,8,10,20,25,32,40 and 50mm High speed steel hadened and tempered

Tap set 3 mm to 10 mm set of 9 pieces High speed steel hadened and 11 1 tempered. With adjestable tap wrenches and die holders. Tap & die Metric set up to 25mmHigh speed steel hadened and 12 1 tempered. With adjestable tap wrenches and die holders. 13 Tap wrench adjustable M 2 - M 12, handle length 230 mm 27

14 Drill twist straight shank set 1.5 to 12 mm by 0.5 mm(HSS) 4 15 Drill twist straight shank set 8 mm to 15 mm by 0.5 mm(HSS) 4

16 Drill twist Taper Shank set 12 mm to 25 mm by 0.5 mm(HSS) 10

17 Number drills H.S.S ( parallel shank) 2

18 Centre drill A 1 to 5 HSS 11

19 Drill H.S.S. taper shank (6 mm to 12 mm in step of 0.5 mm) 3

Drill twist 1.5 mm to 15 mm by 0.5 mm (HSS) (1.5-12.5 stright 20 5 shank and 12.50 to 15 Taper shank)

21 Drill Twist (Straight shank) 3mm to 6 mm (HSS) Addison 1 H.S.S. Twist Drill 3 mm, 4 mm & 6 mm each (parallel Shank) 22 6 Addison 23 Twist drill straight shank 1-12 mm by 1 mm (HSS) Addison 3

24 Combination drill a-2.5 & a-1 (HSS) 3 25 Drill bit 6mm, 8mm & 10 mm HSS stright shank 4 26 Centre bit 8 mm (HSS) 2 27 Centre bit 10 mm (HSS) 1 28 Centre bit 12 mm (HSS) 1 29 Expansion bit set (HSS) 2

30 Countersinking rose bit 12mm (HSS) 1 PACKAGE - 42 MRAC

Sl.no. NAME OF ITEM (With detailed specification) Quantity

Split Air-Conditioner 2 Ton capacity. Compressor - Rotary/ Reciprocating . Refrigerant - R22/R410. with suitable stabalizer & 1 3 Installation. ( Not retrofitted) ( LG/CARRIER/ VOLTAS/BLUSTAR - EQUIVALENT)

Split Air-Conditioner 1.5 Ton capacity. Compressor - Rotary/ Reciprocating . Refrigerant - R22/R410. with suitable stabalizer & 2 4 Installation. ( Not retrofitted) ( LG/CARRIER/ VOLTAS/BLUSTAR - EQUIVALENT) PACKAGE - 49 CARPENTRY TOOLS

NAME OF ITEM AS PER SYLLUBUS (With detailed Sl.no. Quantity required specification)

1 Marking Knife 200mm, HCS 50

2 Square bevel 150 mm, stock - steel, blade - temperd steel 30

Carpenter marking guage 12" 3 96 Stock and stem teak wood, thumb screw and pin steel Carpeter mortise gauge 4 50 Stock and stem teak wood, thumb screw and pin steel 5 Hand Saw 450mm, closed handle (plastic), HCS blade 94 Tenon Saw 300mm, closed handle (plastic), HCS forward cutting 6 52 blade 7 Jack plane, 335 X 50 mm, body cast steel, cutter HCS 16

8 smoothing plane 200 X 50 mm, body cast steel, cutter HCS 100

9 Oil Stone 200 x 50 x 25 mm, coarse grade, silicon carbide (cumi) 13

10 Oil stone 150 x 50 x 25 mm, coarse grade, silicon carbide (cumi) 34

11 Oil Stone 12 X 12 X 100mm length, fine grade, silicon carbide (cumi) 33

12 carborandum Stone 150 mm x 50 mm x 40 mm. (silicon carbide) 16

13 Slip Stone 100mm carborandum/siliconcarbide 8

14 Hand brush for bench cleaning 450mm. 50

15 Rip Saw 600 mm. 3 to 5 teeth per CM, plastic handle 2

16 Cross cut saw 600 mm. 4 to 5 teeth per CM, plastic handle 2

17 Key hole saw 250mm wooden handle, blade - forged temperd steel 6

18 Fret saw frame 150mm, frame - CS, blade - HSS 2

19 Compas Saw 350mm open type handle, blade tempered HCS 4

Trying plane, Length of stroke 450 mm, made of metal cutter (HCS) 20 44 60 mm 21 Plane Rebate adjustable 250x50x9mm width ofcutting iron 9 mm 4

22 Plough Plane with set of 8 cutter upto 12mm width metal 2

23 Plane adjustable circular 250mm (metal stock) 4

Router plane 24 cutter width 6.5 - 13 mm, tungsten steel cutters, CI body, open throat 3 4 cutter, adjustable fence and shie

Moulding Plane setm quarter, round halfround, cavetto, ovoto, bead 25 4 shape blade

26 Spoke Shave 50mm cutter metal 4

27 Card file (steel) wire brush for file 8 28 Cabinet Scraper 100mm, HCS 4

29 Hand Auger 10 mm with wooden handle, HCS 1

30 Hand Auger 14mm with wooden handle, HCS 2 31 Hand Auger 16mm with wooden handle, HCS 1

32 Hand auger 18 mm with wooden handle, HCS 2

33 Hand auger 25 mm with wooden handle, HCS 2

Portable Circular Saw saw machine Power input - 1500 W, No load speed 4800 RPM, AC 220/240 V, 34 1 Maximum depth of cut at 90°- 63 mm, Maximum depth of cut at 45°- 43 mm, blade diameter 185 mm, blade bore 20 mm. Portable Planing Machine Power input 500 W, No load speed 1600 RPM, planning width 82 35 2 mm, Maximum plainning depth 1 mm, maximum ship lapping depth 9 mm, Net weight 2.5 Kg. portable hand sander mahine 200mm disc,220V,0.5 HP, wheel dia 36 1 100mm portable hand sander mahine 100mm disc,220V,0.5 HP, Wheel dia 37 10 100mm Portable Jig Saw 38 5" cutting capacity, overall length 236 mm, in wood at 90° 135 mm, 44 length of stroke 26 mm, input 720 W, strokes per minute 800 - 2800. Power Screw Driver 39 Capacity of metal screw M4 to M8, 230 W, Driving shank hexagonal 2 (6.5 mm), speed 0 to 3800 RPM, fastening torque 100 Nm Hammering drilling Machine, 230 V, 50 Hz, 600 W, 2800 RPM, 13 40 1 mm drill capacity

Set of Turning Tools for wood lathe machine 41 Gouge chisel 6 - 40 mm, skew chisel 6 - 40 mm, round nose chisel 6 - 2 20 mm, spear point chisel 6 - 20 mm, parting tool 6 - 8 mm.

42 Gimlet 6 mm. 47

43 Bradawl 48

44 Pincer 150 mm, material forged steel 71

45 Drill hand brace 12 mm capacity 8

46 Drill S.S. Twist block 2 mm, 5 mm 6 mm set of 3 8

47 Srew Driver 250 mm 11

48 Wooden Mallet Small 1S:2022 23

49 Chart stand - 6‟X3‟ providing with hanging clip top & bottom plate. 1

Wiring board on stand 3 meter x1 meter with 0.5 meter projection on 50 42 the top

Contraction scale 1 m. material Stainless steel, graduations in 'mm' 51 4 and 'inch' PACKAGE - 50 CIVIL AND SURVEYOR ITEMS

NAME OF ITEM AS PER SYLLUBUS (With detailed Sl.no. Quantity specification)

Box drawing instrument containing one 15 cm compass with pin point & lengthening bar, one pair spring bows, rotating compass with 1 interchangeable ink and pencil points, divider Large and bow) 26 drawing pens with plain point & cross point, screw driver and box of leads. (0.2,0.3,0.4mm)

Scale card board metric set of eight A to H in a box 2 1:1,1:2,1:2.5,1:5,1:10,1:20,1:50,1:100,1:200,1:500,1:1000,1:2000,1:2 21 500,1:6000,1:38 1/3,1:66 2/3

Plastic matric scale set A to H in a box 3 1:1,1:2,1:2.5,1:5,1:10,1:20,1:50,1:100,1:200,1:500,1:1000,1:2000,1:2 20 500,1:6000,1:38 1/3,1:66 2/3

Scal plotting box 6 Matric scales 30 cm long with offset scales 4 graduated on both sides1:10, 1:20,1:50, 21 1:100,1:200,1:400,1:800,1:1000 complete in a box

Celluloid sets square 45 ° transparent 20cm, 2mm thick with bevelled 5 20 edges 45 degree

Celluloid sets square 60 ° transparent 20cm, 2mm thick with bevelled 6 19 edges60 degree

T-square 1250 mm having blade graguated in mm made of transparent 7 plastic 5 mm thick 1250 mm long with bevelled working edge 10 mm 19 thick stock

Ranging Rod 3 m long made of condoite pipe fitted with iron shoe at 8 the bottom,32 mm dia and painted alternate either red and white or 10 black and white in length of 20 cm

Ranging Rod 4m long made of condoite pipe fitted with iron shoe at 9 the bottom,32 mm dia and painted alternate either red and white or 8 black and white in length of 20 cm

Cross staff open type (Wood) square piece of wood 4cm thick 15 cm 10 side mounded on an iron rod 20 mm diameter sharpened at bottom 1.5 4 m long

11 Protractor 15 cm full circular celluloid 2mm thick 5 12 Diagonal scale , electroplated IS 1562,1962 MADE OF BRASS 10

Erazing shield small size made of stainless steel 15cm *5cm or nearest 13 21 size

Architects & Builders template made of transparent plastic size 22 14 cm*12cm with different shapes/block of sanitary ware and symbols 10 used in civil engineering cut it for architect builders French curve set of 12 made of transparent plastic ina box of atleast 15 200mm*100mm or nearest size with a set of 12 numbers having 6 different curves

16 Scientific calculator dual power 8 digit lcd pannel not programmable 21

17 Hand press for numbering and lettering 1 18 Hones in case survey of India 1

Proportionate compass 6"inch divider with precise rack pinion 19 movement, movable pivot point adjust ratio one end to the other in a 5 plastic case or velvet lined case Plane table with stand made of well seasoned pine wood of size 75cm*60cm*22mm with 2 hard wooden batten at back weith wooden tripod and wing nut and water proof cover with all the accessories 20 4 such as brass plumbob brass,plumbing fork,brass,spirit level,brass alidade,trough compass and canvas cover as per specification number IS 2539,1963 Indian pattern clinometre tangent clinometer with rack and pinion arrangement with face of vane divided on one side for elevation and 21 4 dippression in digrees and other side with scale of tangent with bubble and levelling screw etc.. Complete in a case Offset rod 4m made of well seasoned pine wood alternately painted 22 either black and white or red and white in length of 20 cm with 1 recessed hook is provided at top Optical square made of brass PWD PATTERN heavy type of wooden 23 1 box Survey plotting scale 8 scale with offsetr scale 24 5 1:10,1:20,1:50,1:100,1:200,1:400,1:800,1:1000 complete in a box Stencil set of 6H lettering both numarals and letters with pen etc.. 25 3 Complete Steel measuring tape graduation in mm 2 mtrs made of steel, 2 m x 13 26 41 mm Steel measuring tape graduation in mm 3 mtrs made of steel, 3 m x 16 27 8 mm Steel measuring tape graduation in mm 5 mtrs made of steel in case, 5 28 39 m x 19 mm Steel measuring tape graduation in mm, cm & M, 10 mtrs made of 29 45 steel in case, 10 m x 25 mm Steel measuring tape graduation in mm, cm & M, 30 mtrs made of 30 8 steel in case, 30 m x 25 mm 31 Plumb bob 50 grms graded casting FG 200 square pvc head 36 32 Plumb bob 115grams 12 33 Plumb Bob 20z,250g 39

34 Stop watch analog type 1/10 sec. 4

35 Wall clock 1

36 Post processing software 1 PACKAGE 51 ELECTRONICS ITEMS

NAME OF ITEM AS PER SYLLUBUS (With detailed Sl.no. Quantity specification)

Neon tester 500 V. A good quality CRYSTAL HANDLEDLength: 190mm 1 111 Contact AC voltage test: 80 to 500V against earth Long lifetime neon lamp: turn/off 30,000 times or more 2 Neon tester pencil bit type 0 - 500 volt 64 3 Neon tester 0 - 300v 40 4 Tester sparking plug „NEON‟ Type (for motor cycles/LMV) 1 5 De- soldering pump Teflon nozzle 37 Soldering &Desoldering station (temp. controlled), 220v ac, 50w, 6 4 temp. 200 - 450 degree C 7 Desoldering Gun 230 AC, 120W, TEMP. 300-450 degree C 16 SMD soldering & de soldering station with necessary accessoiries - soldering iron power- 50w/240v, tip grounded, temp. 200-480 degree 8 4 C, Hot air gun specification- 230v, ac, 400w temp-200 - 450 degree C, air flow - 100 L/min Signal generater 0-100KHz, 0-100 KHz capable of generating sinewave,square wave,triangular wave and saw tooth wave forms 9 1 andOutput dB Range Min -50 dBm (-50 dB)Output dB Range Max 10 dBm ( 10 dB)

Sine wave / signal generator, input 230v, 50Hz, o/p , sin 0 - 30v, 10 2 square 0 - 50v, o/p impedance 600Ω, frequency 0-1 mHz

Function generater(triangular,square,sinewave) 0-1 MHz capable of generating sinewave,square wave,triangular wave and saw tooth wave forms andOutput dB Range Min -50 dBm (-50 dB)Output dB Range 11 1 Max 10 dBm ( 10 dB)and having a facility of varying the output level and frequency with fine and coarse controls and capable of generating carrier wave form and Am,Fm PAM,PWM and PPM waveforms

Dimmerstart 3 Amps single ,phase,spindle mounted 12 4 type,input:240V,50Hzoutput load max 3amp Digital IC Tester - wide range such as 74 series, 40/45 series, 8085,8086,Z80,8255,8279,8253,8259, 8251, 8155, 6264, 62256, 13 1 8288, 8284, test OP - Amp 555, 40 pin DIP ZIF sockets 230V, AC, 9 digit seven segment display Rheostats various values and ratings 14 Single tube, 500 Ω 1 Amp, 1 KΩ 5 Amp, 10 KΩ 5 Amp, 100 Ω 2 4 Amp,

frequency modulater and demodulater trainer kit. variable Amp/Freq On Board carrier signal ,FM Modulation and Demodulation using PLL Detector LPF4th Order LPF Internal Power Supply +5V , +12V/ 500 mANumber of test point to study the FM systemUser friendly front panel block diagramTechnical SpecificationMessage Signal : Sine wave Frequency 100 Hz to 2.8 KHz Amplitude 0 to 3VCarrier 15 Signal : Sine wave Frequency 100 KHz Amplitude 5V Modulation 4 Demodulation : PLL Detector & LPFLow Pass Filter : 4th Order LPFSupply Voltage (Board) : +12V, +5V / DCSupply current : 100 mA (Minimum)Input Voltage : 230 V/ 50 Hz ACInterface connectors : 2mm socketTrainer must have the facility to generate the faults with toggle switches/patch cords and maximum no. of test points to check the volatage and wave forms.

PAM,PPM,PWM trainer kit PAM, PPM,PWM trainer kit conforming to following Pulse Modulation : 1. Pulse Amplitude Modulation2. Pulse Position Modulation3. Pulse Width ModulationOn board SamplingFrequency (Pulse) : 8 KHz, 16 KHz, 32 KHz, 64 KHzOn board Generators : 1. Sinewave 1 KHz & 2 KHz (Gain Adjustable)2. Square wave 1 KHz & 2 KHzLow Pass Filter : for samplingVoice 16 4 Communication : Voice Link using Dynamic Mic & SpeakerAC Amplifier : With adjustable gain controlDC Output : 0- 4 VInterconnections : 2 mm SocketsPower Supply : 230 V ± 10%; 50 HzPower Consumption : 3 VA (approximately) Trainer must have the facility to generate the faults with toggle switches/patch cords and maximum no. of test points to check the volatage and wave forms.

AM/FM commercial radio receivers Frequency of Operation:AM 17 2 Band 500 KHz to 1750 KHzFM Band 88MHz -108 MHz

Application kits for microcontrollers 6 dfifferent applications Microcontroller kits (8051) along with programming software 18 2 (Assembly level ProgrammingApplication kits for Microcontrollers 6 different applications

Senser trainer kit Sensor trainer kit ( containing Various sensors like Thermocouple, RTD, Thermocouple, load cell, strain gauge, LVDT, 19 4 smoke sensors, speed sensor and the medium/monitoring system to display the output of sensors enlisted as above Seven segment DPM A seven segment DPM having following specifications 10-pin connectionSupply voltage: 5V common 20 groundRecommended supply voltage range: 4.75-5.25VDCFull scale 12 input range: 0-200mVUser-selectable decimal pointMounting: Bezel screw mountSuitable for common ground applications

LCD based DPM LCD based DPM having following specifications Digits : 3 ½ digits (±1999 counts) Type : 0.38" (9 mm) high-contrast reflective LCD Polarity : automatic, displayed Decimal Points : 3 position, user-selectable Hold : available Ranges : ±200.0 mV, ±2.000 V Configuration : bipolar differential Impedance : >10 MΩ, (>1 MΩ, 21 on 2 V range) Accuracy : ± 0.1% Conversion Rate : 2.5 per second 12 Zero Adjustment : automatic Warmup : 10 minutes typical ENVIRONMENT Operating Range : 0 to 50 °C Storage Range : -20 to 70 °CPOWER SUPPLY, 5V powered: +5 VDC (± 5%) at 5 mA MOUNTING snap-In bezel mountCONNECTION 26 pins, in 2 rows(minimum

SMPS of different make for computer, AC, 230V Input, O/P - 3.3 V, 22 8 5V, 12V, ¯ 5, ¯ 12

UPS trainer , Demokit 650 VA Battery 7 Ah, 12V, 20 min. back up, 23 1 Battery and transformer mounted in separate case

Mobile phone (different models) at least one 3G mobile A Latest quality mobiles on android platforms and one mobile out of these 24 6 must support 3G/4G on android platform (SAMSUNG/OPPO/VIVO/REDMI/ Equivalent)

Cell phones power source with charger chords for different cell 25 phones quality Cell phone Charger/Power source with the different 2 ports for charging of different type of cell phones

Home theatre system good quality 4.1 Home thetre system i.e with 4 speakers and 1 woofer having the functions uch as Built-in FM 26 2 Radio,LED Display,Fully Functional Remote ControlSupports SD / MMC Memory Cards & Pen Drives Solar power inverter 500VA ,sine single phase, 230V, 50 Hz output, provision for charging solar and KSEB line, Doorplay for ac out put, 27 battery voltage - 12V, 150 Ah, including solar charge control unit. 2 Solar pannel - 200W, 18 V or 100 + 100W solar cable. Two colour 8 mm - 12m each

LED lighting system A LED lighting system compomising of 28 4 following LED Bulb 3W,6W,9W,12W Power rating Monochromatic light source 150W light source with 150 mm focal 29 1 length Accelomerter 1.2 to 10000 Hz piezoelectric type, 360° cable 30 2 orientation

Sesmic instruments sensitivity 1 mv/g to 5 mv/g light weight , 31 4 operating temperature +325° F

32 Stroboscope hand held , flashes per minute, Analog indicator 1

Digital line frequency indicator Frequency 30 Hz, to 70 Hz, display 33 2 four digit 7 segment, 12.5mm hight

Digital insulation tester 17mm LCD display, single person push button 34 1 operation, 0 - 200 Ω 500V dc

Digital L.C.R. bridge 4 digit display, inductance range 200 µH - 20H, 35 2 capasitance range 200 pf to 2000 µf, dimension 185 x 93 x 35 mm

Trainers on linear circuits i.e. operational amplifiers Variable 15v dual power output, signal generator 100 Hz - 10 Hz range, wave form 36 1 square, sine, frequency 100 Hz - 10 Hz , power source 110 - 220v ac, 50 Hz

Trainers on power suppliers half wave rectifier full wave rectifier bridge rectifier and power supply regulated power supply Input 230 V, 37 1 50 Hz, output 12 V, transformer output (18 - 0 - 18v, 6 - 0 - 6v, 500 mA) dimension in mm (W -365, D - 265, H - 120 )

Synchronoscope , LED synchroscope, i/p volt 440 V ,Relay contact : 1 38 2 pole change over, optional voltage 110 V, frequency 40 - 65 Hz

Synchroscope analog Input voltage range 88 - 440V , Burden 1.8VA 39 4 max. frequency range 40 to 65 Hz

40 4 Point relays (12V DC 4 pin relay) 4

41 5 Point relays (12V DC 5 pin relay) 4

Service Oscillator- AF/RF, 120 MHZ , WITH Sine wawe & square 42 4 wawe Triangular wave,Digital display(freequency)Metal body cabnet. A.F.O Oscillators-.Generates frequency from 1 Hz to 250 KHz in 6 steps wave form is sine square and Triangular. Output is variable from 43 0 to 20 Volts Accuracy ± 3% or 2 Hz. Output Impedance 50 ohms. 2 Solid State. Workable on 220 v 50 Hz complete I.C. version with coarse and fine controls for output.

44 CRO 5MHz single beam single channel 4

CRO 20 MHz dual trace, Double beam, band width 20 45 2 MHz,Two channel display colour.

46 Regulated power (DC) supply 12 V , 100 mA 4

47 Regulated power supply 0 - 30V, 2 amps variable 4

48 Cooker control pannel single phase, 250V, 30Amps. 4

49 Single phasing preventer 415V power upto 20HP , current upto 40A 12 PACKAGE - 52 ELECTRICAL ITEMS NAME OF ITEM AS PER SYLLUBUS (With detailed Sl.no. Quantity specification)

1 Connecting screwdriver 100 mm 13 2 Soldering iron 25 W. 240 V. 24 3 Soldering iron 30 W. 240 V. 4 4 Soldering iron 65 W/25 W 91 5 Soldering iron exchangeable copper tip(65 watts) 14 6 Electric soldering iron 125 watts 230-250 V 14 7 Electric soldering iron 25 watt solderon pencil tip 7 Continuity tester A Good quality Continuity tester having audible 8 12 indication and LED indication ,short response time Scissors 200mm straight cut scissor made up of stainless steel having 9 2 a overall length of 200mm. 10 Scissors blade 150 mm 4 11 Knife Double Bladed Electrician 100 mm 24 12 Wire stripper 200mm 1 mm² to 4mm² 38 13 Crimping tool RJ-45 /RJ11 3 14 Crimping Tool 16 mm2 to 50 mm2 5 Hand operated crimping tool (i) for crimping up to 4mm and (ii) for 15 4 crimping up to 10mm 16 Small crimping tools (assorted) 10 – 100 mm (5nos) 88 17 Crimping tool 1 mm² to 16 mm² 4

18 Crimping tool for telephone/LAN cable 4

Precesion set of srew drivers -T5,T6,T7A precision set of Screwdrivers T5,T6,T7 conforming to following specifications with a 19 4 cushioned grip handle .Size Point-to-point distance Inch MM T5 0.055 1.42 T6 0.066 1.70 T7 0.078 1.99 Tweezers Bend tip A good quality tweezer 100 mm long made up of 20 Stainless Steel bend tipped throughly covered with the insulating 64 material DOL starter, 440V 2-3 HP, Contactor type No Volt and over load trip. 21 2 ISO & CE Certified. Battery Charger 15V,Current controlled AC input, 230 V, 50 Hz, DC 22 11 out put, 0 - 15 V, 5 Amp 23 Laboratory Type Induction Coil 3

24 DC Power Supply 0-30V, 2 amp 3

25 Variable DC power supply 0 - 30v, 1 Amp 4 Rheostat 0 -1 Ohm, 5 Amp ,Linear type, A-B-C terminal configuration, wire wound, Eureka or constant wire, high resistance to 26 4 oxidation, temperature co -efficient of resistance (/°C) at 20°C - 0.00003. IEC Standard Rheostat 0 -10 Ohm, 5 Amp ,Linear type, A-B-C terminal configuration, wire wound, Eureka or constantan wire, high resistance 27 4 to oxidation, temperature co -efficient of resistance (/°C) at 20°C - 0.00003. IEC Standard Rheostat 0- 25 Ohm, 1 Amp Linear type, A-B-C terminal configuration, wire wound, Eureka or constantan wire, high resistance 28 3 to oxidation, temperature co -efficient of resistance (/°C) at 20°C - 0.00003. IEC Standard Rheostat 0- 300 Ohm, 1 Amp Linear type, A-B-C terminal configuration, wire wound, Eureka or constantan wire, high resistance 29 5 to oxidation, temperature co -efficient of resistance (/°C) at 20°C - 0.00003. IEC Standard Rheostat, 10 ohm, 20Amp,Linear type, A-B-C terminal configuration, wire wound, Eureka or constant wire, high resistance to oxidation, 30 4 temperature co -efficient of resistance (/°C) at 20°C - 0.00003. IEC Standard Rheostat, 40 ohm, 1AmpLinear type, A-B-C terminal configuration, wire wound, Eureka or constantan wire, high resistance to oxidation, 31 4 temperature co -efficient of resistance (/°C) at 20°C - 0.00003. IEC Standard Rheostat, 50 ohm, 4.1Amp,Linear type, A-B-C terminal configuration, wire wound, Eureka or constant wire, high resistance to oxidation, 32 4 temperature co -efficient of resistance (/°C) at 20°C - 0.00003. IEC Standard Rheostat, 300 ohm, 2Amp,Linear type, A-B-C terminal configuration, wire wound, Eureka or constant wire, high resistance to oxidation, 33 4 temperature co -efficient of resistance (/°C) at 20°C - 0.00003. IEC Standard Rheostat, 400 ohm, 1Amp,Linear type, A-B-C terminal configuration, wire wound, Eureka or constant wire, high resistance to oxidation, 34 4 temperature co -efficient of resistance (/°C) at 20°C - 0.00003. IEC Standard Rheostat, 1000 ohm, 2Amp,Linear type, A-B-C terminal configuration, wire wound, Eureka or constant wire, high resistance to 35 4 oxidation, temperature co -efficient of resistance (/°C) at 20°C - 0.00003. IEC Standard 36 Miniature Breaker 16 Amp, 220 V, ( Raw Material) 4 37 Miniature circuit breaker(MCB) 220V/ 6 Amps 4 38 Earth leakage circuit breaker (ELCB) 220V/25mA 8

39 Moulded case circuit breaker (MCCB) 220V/1A 8

Growler 250V, 3Amp, 50Hz, single phase adjustable jaw testing 40 5 armature with ampere meter and testing prob Contactor & auxiliary contacts 3 phase, 440volt, Addon type 3 NO, 2 41 4 NO - NC, 32 Amp. Contactor & auxiliary contacts 3 phase, 440 volt, Addon type 3 NO, 2 42 4 NO - NC, 32 Amp. 43 Voltage Stabiliser 3

44 3- point D.C. Starter, 230V DC, 15A, OLC 9-16A, Laboratory type. 4

Single Phase Capacitor Motor with starter switch 1 HP 230 volt 50 cycles, 50Hz, 1440 rpm class B insulation Horizontal mounted 45 1 terminal box having separte terminals of banana terminals with starter with ICDP, fuses supply terminals etc. ISO & CE certififed. 46 Capacitor motor 1/2 H.P. single phase 250 V 4 47 Capacitor motor with brake load 240 V , 50 Hz, 1/2 KW, AC 2 Stepper Motor with Digital Controller - micro controller kit 2V at 400mA with add on card DAC,ADC,STEPPER MOTOR. Motor driven system - uni polar, step angle 1.8° full step voltage and 48 current 12V at 400mA max. , continues power 5W resistance per 1 phase 23 mH, Holding torque 2000 gram cm, Betend torque 200gcm, rotor inertia 22g cm², leads 118 in . 6 AWG UL 1007 . Insulation resistance 100Mohm min. at 500 VDC. 49 Split phase motor 1/2 H.P. single phase 250 V 4

50 Split phase induction motor(1/4 hp, 230 V) 1

51 Capacitor start induction motor(1/2 hp,230V) 1

52 AC 3 Phase motor, 400/50 Hz(2 HP) 1

53 Universal motor 1/2 H.P.AC/DC 250 V 3

Shaded pole motor 1/8 HP, 240V, 50Hz AC, 2 pole self aligning , 54 4 bronze bearing.

55 Repulsion motor 1φ, 240 V, 50Hz, 300 W, 4 pole, 1500 rpm. 4

Single phase Transformer, core type, air cooled 1 KVA, 240/415, 50 56 4 Hz

57 Transformer single phase 1 K.V.A. 250/100 v 4 Autotransformer Single phase input, 240V, output - 0 - 270 v, 50 Hz, 58 4 8 A 59 Autotransformer Single phase 0 - 240V - 270V 1kVA 8A 7

60 Transformer Three phase (oil cooled) 5 K.V.A. 440/220 v 8

61 Current transformer 10/1, 20/1,30/1,50/5, 100/5 & 300/5 A set 4

62 Potential transformer 220/110, 300/110, 440/110, 600/110 4 63 Oven Stove - 20 L, solo microwave oven 1

64 Electric drying oven small type 200W 1

65 Electric heater 1000/1500 W 1

66 Water Heater 10 liters 1

67 Motor Pump set 1 HP, 1 Phase, 240 V 1

68 Pin Type, shackle type & suspension type insulators (Raw Material) 2

69 Rotary Switch 16A 1 STAR -DELTA STARTER A) Manual star delta starter - 440V, 16A, Lever operated, with push 70 2 button OFF over load trip, with NO VOLT coil iron clad or sheet metal type. Manual star Delta starter- 440V, 3 HP, Lever operated, with push 71 button OFF over load trip, with NO VOLT coil iron clad or sheet 3 metal type. ISO & CE Certified. STAR -DELTA STARTER 72 B) Semi- Atomatic Star -delta starter, 440V, 16A, 3-contactor type 2 with soft ON/OFF, Over load relay 4-9A. ISO & CE Certified. Semi-automatic star Delta starter 440V, 3-5 HP, 3-contactor type with 73 4 soft ON/OFF, Over load relay . ISO & CE Certified. STAR -DELTA STARTER 74 C) Fully automatic Star- Delta Starter - 440V, 16A, 3-contactor type 2 with soft ON/OFF, Over load relay 4-9A. ISO & CE Certified. Star delta starter(2 HP)Fully automatic - 440V, 3-contactor type with 75 1 soft ON/OFF, Over load relay 4-9A. ISO & CE Certified.

Automatic star Delta starter 440V,3-5 HP, over load with no volt trip, 76 push button ON/OFF and contactor type, input & output terminals 3 with indidator.ISO & CE Certified.

D.O.L Starter(2 HP)440V , Contactor type No Volt and over load trip. 77 1 ISO & CE Certified. D.O.L starter 440 V, 2-3HP contactor type, , NO volt and 3 button 78 3 fuction soft switch .ISO & CE Certified. Automatic Reverse Forward starter 440V , 5/10HP contactor type, 79 Forwared- reverse interlocking OL, NO volt and 3 button fuction soft 4 switch .ISO & CE Certified. Two point starter for DC series motor with range of DC 230V, 15A, 80 4 OLC 9-16 A of Laboratory type.

Soft starter 1ph , 240V, contactor operated, OL and NO volt reliese . 81 2 ISO & CE certified.

82 Bar magnet 5 cm 2

83 Horse shoe magnet Alnico 6'' x 4'' 3 84 Compus needle magnetic 4 cm dia 4

85 Rubber matting 2 meter x 1 meter x 9mm 8

86 Rawl plug tool and bit 8

87 Rawal plug tool(6mm) 4

88 Rawal tool holder & Bit No.8, 10, 14, & 16 6

89 Set of Wall jumper octagonal 37mm X 450mm and 37 X 600mm 16

90 Bradawl 150 mm X 6mm square pointed 84

91 Rubber gloves 5000volts 8

92 Safety belt with provision for keeping tools 22

93 Tower ladder on type wheels Min 10ft-Max 30ft 4

94 Portable extension ladder Aluminum 6 to 9 meters 1

95 Trowel 150mm 4 96 C.F.L. lamp 5watt 4 97 C.F.L. lamp 15watt 4

98 C.F.L. lamp 25watt 4

99 Lamp bank 20 A , 250V , 5KVA 4

100 Wheatstone Bridge 1Ω to 10mΩ 2 101 Field regulator 0 – 1000 ohmic, 2 Amps 4

102 UPS 650VA with battery 230V (150 AH Battery) 2

103 Online / offline UPS 1φ, 1 phase out, sine wave, battery 24v - 42 Ah 4

Stove melting solder 220v, 100w, pot dia - 38mm, out put temp. - 200 - 104 1 480 degree C 105 Melting Pot 4

106 Food mixer 240V, 50 Hz, 450W 4

107 High rate discharge testor 2 - 0 - 2v 4

Phase sequance meter. 200-600 V AC. Dielectric strength 108 4 2000V/minute. EN 61010-1 EN 61010-2-31

Earth tester with spike and connecting leads analog three electrode 109 4 method 0 - 100 Ω

110 Hair dryer portable type 230/250V with temperature control 1000W 4 PACKAGE - 53 ELECTRICAL ITEMS

NAME OF ITEM AS PER SYLLUBUS (With detailed Sl.no. Quantity specification)

Hydraulic crimping tool for UG cable crimping with dies 20 sq mm to 1 4 250 sq mm

2 DC Power supply 250v DC , 25 Amp 4

3 Used DC Generator-series type, dc series generator 2 kw, 220v 1

4 Used DC Generators-shunt type, dc shunt generator-2.5 kw, 220v 1

Used DC Generators- compound type, dc compount generator 2.5 kw, 5 1 220v D.C. Shunt Generator with control panel,2.5 KW, 220V, (dc shunt generator 2.5kw, 220v, control panel - rheostat - 1000Ω , volt 300v 6 mc type, ammeter 0-5A, and 0-16A mc type, indication lamps, 1 terminal connector, (Ammeter field T/P and out put) fuse unit 16A- 2nos) D.C. Compound Generator with control panel 2.5 KW, 220V,( dc compound generator 2.5kw, 220v, control panel - rheostat - 1000Ω , 7 volt 300v mc type, ammeter 0-5A, and 0-16A mc type, indication 1 lamps, terminal connector, (Ammeter field T/P and out put) fuse unit 16A) DC Series Motor coupled with mechanical load 0.5 to 2 KW (up to 3 HP) 220V, Terminal box with backelite banana terminals for field and 8 armature with educational type friction brake having two numbers of 1 dial type spring balance and belt provided with horizontal foot mounding in MS C chennel frame - IS4722 -1992 - ISO AND CE . DC Shunt Motor 2 to 2.5 KW, 220 volts, 1500RPM contiues rating class B insulation mounded with MS C channel frame all terminals are 9 1 brought out to the terminal box/ pannel wit backelite insulated banana terminals.IS4722 -1992 - ISO AND CE .

DC compound Motor with starter and switch 2 to 2.5KW / 3HP 1500 rpm, continues rating class B/F insulation Horizontal foot mounted 10 1 with pannel having 4 point starter, DPDT knife switch (Quick Brake), ICDP fuses etc and banana terminals.IS4722 -1992 - ISO AND CE . A.C. Series type Motor with mechanical load ¼ HP, 230V, 50 Hz, with mechanical load arrangement having 2 dial type spring balance 11 and friction belt, motor and loading system fixed in C channel frame. 1 Motor terminals separte in pannel / terminal box banana terminals.IS4722 -1992 - ISO AND CE . Synchronous motor 3 Phase, 3 HP, 415V, 50Hz, 4 Pole, with control panel having 3 pole MCB, DOL starter, Volt meters and Ammeters in 12 suitable type and range, variable DC inbuilt for field winding, panel 1 lay-out with terminals of machine and supply. Motor and panel mounted in MS C channel frame. (ISO & CE certified)

13 Transformer oil testing kit Automatic 60kv 2

14 Autotransformer Three phase 0-415V - 470 , 16A 1kVA 8

Auto Transformer starter(3 HP) 440V, over load with no volt trip, 15 push button ON/OFF and contactor type, input & output terminals 1 with indidator.ISO & CE Certified.

Squirrel cage induction motor 3 16 2 H.P. 400 V with D.O.L. starter , ISO & CE cetified

Squirrel cage induction motor 5 17 2 H.P. 400 V with star delta starter , ISO & CE cetified

UPS 500VA with battery 230V, off line, inbuilt battery 12v, 7Ah, 18 4 230v o/p, single phase

UPS 1 KVA for server, Input 230v, 30 min. backup, single phase, sine 19 1 wave,

Online UPS 2KVA (Including 48V DC supply, 25 Ah 4 Battery), sine 20 1 wave, 230v o/p

UPS 3KVA with backup time minimum 30 minites Input voltage 21 3 230AC, sine wave, single phase, Battery 12 V, 42 Ah, online ups

UPS And Battery 5 KVA, sine wave, single phase, online, 1 phase 22 3 out, 230v, 50 Hz, 120v 60 Ah battery

Ups And Battery 10 KVA, 3 phase, 5 hr. backup time, online, pure 23 3 sine wave

24 Lead Acid battery 75Ah 12V , Tubular, 75 Ah, 12V, 3

25 Solar Water heater system 1

26 Washing Machine 1 PACKAGE - 54 FITTER TOOLS

NAME OF ITEM AS PER SYLLUBUS (With detailed Sl.no. Quantity specification)

1 Trammel 450 mm, beam length 450 mm, material steel 2

2 Trammel 300 mm.beam length 300 mm, material steel 12

3 Beam compass stencil cutting(trammel point) 300 mm, material steel 42

4 Spirit level 300mm, 0.05 mm accuracy, SS 22

5 Spirit level 250mm, 0.05 mm accuracy, SS 2

6 Spirit level 0.05mm accuracy 200mm, SS 10

7 Spirit Level 150mm, 0.05 mm accuracy, SS 5

8 Snips straight 250 mm. HCS 14

Snip sheet metal- straight nose 200 mm , high carbon steel 9 28 blade.Aviation quality

10 Snip bend 250 drop forged steel hardened and tempered 20

Snip sheet metal curved- nose 200 mm, high carbon steel 11 14 blade.Aviation quality, drop forged steel hardened and tempered

12 Left cut snips 250mm, drop forged steel hardened and tempered 12

13 Right cut snips 250mm, drop forged steel hardened and tempered 12

14 Oil Can 0.125 ltr (pressure feed system ) metal body 4

15 Oil Can 0.250 ltr (pressure feed system ) metal body 32

16 Oil Can 0.5 ltr (pressure feed system )metal body 24 Safety goggles clear glass, IS 14352 17 Type of product - safety spectacle, lens coating - anti fog, lens colour - 343 clear, frame colour - black, size - universal

Divider- spring joint length 150mm,measuring point Hard 18 359 end,15cm,Spring,IS 4083:1967

19 Divider spring 200 mm, Fully hardened and temperd 52 20 Wing Divider 200 mm HCS, Marking point hardened and temperd 22

21 Wing compass 12" HCS 46

22 Inside calliper 150mm (Spring type) HCS 10 23 Inside calliper 150mm HCS 2 24 Outside calliper 150mm (Spring type) HCS 10

25 Odd leg (Jenny)calliper 150mm (Spring type) 2

26 Scriber straight 150mm (Knurled centre position ) High carbon steel 396

Straight Scriber 150 mm (Knurled centre position ) High carbon steel 27 6 with scribing block universal

28 Straight scriber 200 mm (Knurled centre position ) High carbon steel 61

29 Bent Scriber 150 mm (Knurled centre position ) High carbon steel 2 30 Straight edge 450 mm steel IS 2220-1990 8 31 Straight edge steel 1 metre 2 32 Marking table 91 x 91 x 122 cm with metal stand and cover 7

33 Marking table 900 x 600 x 900 mm with metal stand and cover 2

34 Marking table ( CI) 120x120 cm with stand 3 Surface Plate 600X600mm Grade-I, IS 2285(2003) (cast Iron) with 35 3 stand (metal) Surface plate(450X450 mm)Grade-I, IS 2285(2003) (cast Iron) with 36 15 stand (metal) Surface Plate 400x400mm Grade-I, IS 2285(2003) (cast Iron) with 37 1 stand (metal) Granite surface plate 1600 x 1000 mm Grade I , IS 7327 (with metal 38 2 stand and cover )

39 Blow Lamp 0.50 litres. Brass sheet body, IS 1899 26

40 Blow Lamp 1 litre, Brass sheet body, IS 1899 12

41 Copper bit soldering iron 0.25 Kg IS 1548 50 42 Copper bit soldering iron 0.35 Kg IS 1548 13

43 Soldering Copper Hatchet type 500gms 24

44 Magnifying lenses 75 mm diameter, 10x lense 34

Clamp “C” 50 mm, cast iron frame, steel spindle handle with swivel 45 16 head Clamp “C” 100 mm, cast iron frame, steel spindle handle with swivel 46 27 head Clamps C 150mm, cast iron frame, steel spindle handle with swivel 47 10 head Clamps C 200mm, cast iron frame, steel spindle handle with swivel 48 11 head Hand Reamer adjustable cover max 9 ,12,18mm – set of 3, High speed 49 8 steel 50 Hand Reamer taper 4 -9mm set of 6, High speed steel 3 51 Reamer parallel 12 - 16mm set of 5, High speed steel 7

52 Reamer 6 mm to 25 mm by 1 mm, High speed steel 1

53 Reamer adjustable 10 mm to 15 mm by 0.75 mm, High speed steel 1

54 Reamer - machine straight flute 6-25 mm, High speed steel 1

55 Reamer adjustable 1-20 mm, High speed steel 2

56 Scraper 100mm Type A, IS 6861 (1973) 40

57 Scraper flat 150 mm. Type A, IS 6861 (1973) 23

58 Scraper triangular 150 mm. Type B, IS 6861 (1973) 20

59 Scraper triangular 250 mm. Type B, IS 6861 (1973) 2

60 Scraper half round 150 mm. Type B, IS 6861 (1973) 45

61 Scraper half round 250 mm. Type B, IS 6861 (1973) 1 Combination set 300 mm (complete set) hardened measuring heads, 62 28 stainless steel rule Combination Set 200 mm (complete set) hardened measuring heads, 63 1 stainless steel rule Stakes- 100 mm 64 18 hatchet stake - 14 pound med carbon steel Stakes- 100 mm 65 18 grooving stake - 14 pound - med carbon steel Stakes- 100 mm 66 4 Tinman horse stake - 20 pound , med carbon steel Stakes- 100 mm 67 2 Creasing stake - 14 pound , med carbon steel Stakes- 100 mm 68 4 Beak horn stake - 14 pound - med carbon steel

Stakes- 100 mm 69 2 half moon stake - 14 pound med carbon steel

Stakes- 100 mm 70 10 round bottom stake - 14 pound , med carbon steel

Stakes- 100 mm 71 2 Bottom head stake - 14 pound , med carbon steel 72 Funnel Stake 4 73 Anvil Face Stake 8

Dial Test Indicator with magnetic stand 0.01mm with magnetic base ,Mitutoyo, plunger type, φ57/0.01/10mm range, contact point carbide, 74 12 grand gear - stainless steel, spindle - high strength quench hardened stainless steel, with NABL calibration certificate

Sine bar 200 mm.Accuracy for squareness, flatness and parallesam with in 0.005mm, Angular accuracy ±5 seconds, Centre disance 75 11 between rollers with in ±0.0005, Hardeness 60RC - made from High quality Alloy steel. Sine bar 300 mm.Accuracy for squareness, flatness and parallesam with in 0.005mm, Angular accuracy ±5 seconds, Centre disance 76 6 between rollers with in ±0.0005, Hardeness 60RC - made from High quality Alloy steel. 77 Grease Gun hand type 5

78 Grease Gun heavy duty trolley type 10 kg capciaty 2 PACKAGE - 55 FITTER TOOLS

NAME OF ITEM AS PER SYLLUBUS (With detailed Sl.no. Quantity specification)

1 Square adjustable 150 mm blade. 16

Interchangeable ratchet socket set with a 12 mm driver, sized10-32 2 6 mm set of 18 socket & attachments. Chrome vanadium steel

3 Stud Extractor EZY – out 3mm to 18mm set 16

4 Stud extractor set of 3 1

5 Stud remover with socket handle 2

6 Drill chuck 12 mm. 1

7 Wheel dresser (One for 4 units). Diamond point 4

8 Wheel dresser diamond (inserted0.75 or 1 carrot ) 5

9 Grinding wheel dresser Huntington type 6

10 Sleeve drill Morse 0 – 1, 1 – 2, 2 – 3. 9

11 Morse taper sleeve no 3-4,4-5 3

12 Reduction sleeves morse 1-1, 3-1, 4-1, 4-2, 5-1, 5-2, 6-1 3

13 Tongs roving 350mm. MS 16

14 Tongs flat 350mm. 74

15 Tongs 300 mm 4

16 Smith's square 450 mm x 300 mm.HCS 8

17 Cold set rodded 25X200mm. HCS 16

18 Hot set rodded 25X200mm. HCS 8

19 Swages top & bottom 12 mm /19 Cast steel 8

20 Flatters (rodded) 55 mm square. HCS 16

21 Fuller top & bottom 6 mm 9 mm (Pair). Case hardened steel 16 22 Anvil stand 16 23 Shovel. HCS 16

24 Rake. MS 60cm 16

25 Quenching tank (To be made in the Institute). 8

26 Pocker. MS 60CM 16

27 Hardie. HCS 16 28 Leather apron. Fine quality 16 29 Leather apron 16 30 Pipe Cutter to cut pipes upto 50 mm. dia 9

31 Pipe Cutter to cut pipes above 50 mm dia 6

32 Pipe cutting tool 2 Pipe cutter with built in reamer and space cutter, for copper tube(3mm 33 7 - 32 mm)

Pipe cutter- miniature for copper tube3mm to 16 mm 34 4 (ROTHENBERGER/IMPERIAL/FRIG TOOLS,Rex/Equivalent)

Conduit pipe cutting and threading machines adjustable for 15mm to 35 4 30mm. 36 Pipe bender spool type up to 25 mm. with stand manually operated. 8 37 Pipe bender, manually operated 1 Conduit pipe bending machine, bench type suitable for 15mm,18mm, 38 4 25mm and 30mm pipe

39 Adjustable pipe chain tonge to take pipes up to 300 mm. 8

40 Chain pipe wrech 90 mm- 650 IS 4123 1

41 Comparators stand with dial indicator LC 0.01mm. HCS 1

42 Surface roughness comparison plates N1-N12 grade 1 43 Portable forge 450mm with hand blower 1

44 Forge portable hand blower 38 cm to 45 cm. 7 45 Forge with hand blower 3.3mᶾair floe/minute, blower dia 8'' 4

46 Micrometer inside 25 mm with extension up to 150 mm 1

47 Tube cutter 1 48 Tube bender- triple head 180° 1 49 Pinching tool 1

50 Solid parallels in pairs (Different sizes) in metric 16

51 Radius truning attachment 2

53 Base chuck for slotter 150 mm 2

54 Shaper indexing centre small size 2

55 Steel tool box with lock and key (folding type) 400x200x150 mm 6

56 Puller 3 legged- 300 mm long ,with flexible arm,Drop forged steel 16

57 Bearing Puller 200 mm three leg 12

58 Universal puller for removing pulleys, bearings 2 59 AC alternator slip ring puller 2 60 Wiring puller manual 500lbs pulling force 4

61 Files assorted sizes and types including safe edge file (20 Nos) 4

62 Hand Shear Universal 250mm 6

63 Rivet sets snap and Dolly combined 3mm, 4mm, 6mm 4

64 Rivet sets snap and Dolly combined 3 mm 1

65 Snaphead rivet set 3 mm and 4 mm 1

66 Shear Tin Man‟s 450 mm x 600mm 2

67 Sher Tinmans 300mm 4 68 Sheet Metal Gauge 2 Wire gauge metric- and wit worth Stainless Steel plate. embossing 69 4 converse of British & Metric.. (Mitutoya/yamayo/Baker/Equivalent) 70 Spark lighter 4

71 Tin Smith (400mm) 2

72 Steel Square 450 mm x 600 mm 8 Knife- folded stainless steel,sharp cutting edge - Blade length 150 73 12 mm 74 Diagonal cutter(15 cms) 10

75 Swaging tool, punch type, set of size for tube(4.7 mm to 16 mm OD) 8

Swaging tool, screw type with adaptor set of size for tube(4.7 mm to 76 8 16 mm OD) Bending spring- external type, for copper tube 4.7 to 16mm Dia, 77 10 stainless steel 78 Valve key handle- 4.7mm sq. 3 79 Valve key handle- 6.4mm sq. 3 Scissor- gasket cutting ,stainless steel,with sharp cutting edge, 80 2 length25 cm Lapping plate- Toughened Glass type.Thickness 10 mm Size 250x200 81 4 mm 82 Trowel C-125-1s:6013 29

83 Srew Pitch gauge Matric M6-M12 IS 9610-1982 1

84 Saw plumber 300mm 2

85 Washer Cutter 1

86 Mirror 100X150mm 2

87 Scribing guage 1

88 Soil Pot with brush 1

89 Pot hook 1

90 Plumbers laddle 2

91 Tool caulking set of 5 1

92 Plumber's metal melting pot 10kg 1

93 Pipe Stock and dies (BSP) 15mm,20mm,25mm 2

94 Sight rail and bonning rod 1

95 Dormat 1

96 Girmale 1

97 Ring guage 15mm, 20mm, 25mm and 32mm 1

98 Thread plug guage M20 & M21 3

99 Thread Ring guage M20 & M21 3

100 Steel wire brush 150 x 50 mm 1 101 Protractor with blade 150mm 44 102 Hand Groover 5 mm 6 103 Ladle 150 mm Dia. 4 104 D.E. Spanner G.P. (6 mm to 32 mm) (Set of 12 spanner) 4

105 Glass cutter – Diamond point 2

106 Tripaning tool 70 mm 2

107 Tin . smiths bench folder 600 x 1.6 mm 1

108 drill drift 3

109 dog carrier 25mm stright and bent 20

110 dog carrier50mm stright and bent 27

111 dog carrier75mm stright and bent 27

112 Tool makers button 6mm, 8mm,12mm 3

113 Die handle 6

114 Drill angle guage tool grinding 15

115 Hand chaser M 12 & M16 external 6

116 Hand chaser M 12 & M16 internal 6

117 Machine Chaser M12 to M21 ( standard series) 3

118 Coventry Die head (M10 - M24) 6

119 Coventry Die head self opening (M10 - M24) 3

120 Stock and Die set for 20 mm to 50 mm G.I. pipe 2

121 G I die stock with 12.7 mm, 19 mm, and 38 mm dies 4

122 Stock and Dies conduit 2

123 Set of stock and dies – Metric 2

124 Pipe wrench 450 mm (18") 8

125 Pipe wrench 250 mm (10") 4

126 Pipe wrench 200 mm (8") 9

127 Torque wrench (14 to 68 Nm 8 128 Torque wrenches 5-35 Nm, 12-68 Nm & 50-225 Nm 1

129 Stillson wrench 350 mm 2 130 Stilson wrenches 250 mm 16

131 Stillson wrench 200 mm 14

132 Wrench adjustable(150mm) 4

133 Wrench adjustable(200mm) 8

134 Wrench adjustable(250mm) 8

135 Magnetic chuck 150mm dia circular type 3

Lathe mandrel different types 1. Plane type lathe mandrels Ø ½" and 1", length 4" 2. Expanding mandrel A. Ø ½" to 9/16", arbor length 6", sleeve length 2.5" 136 3 B. Ø ¾" to 7/8", arbor length 7", sleeve length 2.75" C. Ø 1" to 1¼", arbor length 9", sleeve length 4" 3. Stepped mandrel Ø ½" to 2 ½" 4.Cone Mandrel Ø ½" to 2 ½"

Tool bit assorted sizes on holder 1. Turning (LH and RH), 2. Facing , 3. Boring (15 to 50 mm), 4. 137 6 Parting tool 3 mm width, 5. Internal threading tool (metric), 6. External threading tool (metric), 7. Finish turning tool (RH and LH)

138 Tool bits H.S.S. 6 mm square 1

139 Tool bits H.S.S. 10 mm square 1

Slip Gauge as Johnson metric set. 81 pieces With( NABL Acridited 140 1 Certficate and inspection Report) Grade 1 PACKAGE - 56 GRINDING AND WELDING MACHINES

NAME OF ITEM AS PER SYLLUBUS (With detailed Sl.no. Quantity specification)

D.E. pedestal Grinding machine with 200mm diameter wheels rough and smooth with twist drill grinding attachment. 1 HP motor, double 1 10 end pedestal type, wheel dia 200 mm, width 25 mm, 1st wheel coarse grain, hard grade, 2nd wheel fine grain , medium grade

PEDESTAL GRINDER FITTED WITH COARSE AND MIDEUM GRAIN SIZE GRINDING WHEELS DIA 300 MM, width 35 mm 1.5 2 1 Hp motor, first wheel coarse grain hard grade, 2nd wheel medium grain hard grade

AG4 GRINDER , (angle grinder 4''), wheel dia 100mm. 3 10 BOSCH/Dewalt prefferable

Transformer welding set 300 amps. – air cooledcontinuous welding 4 2 current, with all accessories and electrode holder. Ador/Esab preffered

5 Electric PPR Pipe Welding machine 1

Gas welding set with oxygen accetylene cylinder (Oxygen cylinder 7 mᶾ accetylene cylinder 6mᶾ and accetylene double stage regulator, 6 oxygen and accetylene hose pipe each 10 m, Flash back arrester for 3 cylinder mounted and torch, Welding torch, cutting torch, Cylinder key, Cylinder trolly, Spark lighter, and gloves) Ador/Esab preffered

7 Butane gas with brazing torch (Portable type) 1 ARC WELDING TABLE With positioned Four leg with wheel. The 8 table top dimensions would appro 122 cm X 12 cm X 60 cm. with 9 positioner 9 Gas Welding Table 1220mm x760mm. with positioner 4

Goggles for welding black 10 shade - 5 DIN, Lens coating - Anti fog, Lens colour black, Type of 34 product - safety spectacle

WELDING HAND SHIELD Made by FIBER – dark colour. Light 11 65 weight. (below 500 grams) Preferred company ESAB

WELDING HELMET FIBER Made by leather/FIBER. Light weight. 12 64 Full covered type(Head) Preferred company ESAB.

13 Gloves for Welding (Leather ) 21 Welder cable (copper) to carry 400 amps. With flexible rubber cover 14 40 (in meter)

15 Lungs for cable 90

16 Earth clamp 400 Amps. Copper or copper alloy. Ador/Esab preffered 16

17 Gas lighter. 16

18 Spindle key for cylinder valve 7

19 Tip cleaner 71

ELECTRODE HOLDER Capacity 600amp Light weighted. Fully 20 6 insulated. Ador/Esab preffered

REGULATOR FOR OXYGEN Double staged regulator. Ador/Esab 21 1 preffered

REGULATOR FOR ACETYLENE Double staged regulator. 22 1 Ador/Esab preffered

FLASH BACK ARRESTTER(TORCH MOUNTED) Two pair for 23 4 oxygen. Two pair for acetylene. Ador/Esab preffered

FLASH BACK ARRESTTER (CYLENDER MOUNTED) Two pair 24 4 for oxygen. Two pair for acetylene. Ador/Esab preffered

PORTABLE ABRASSIVE CUT-OFF MACHINE Wheel capacity 14 25 1 inch. BOSCH/Dewalt preffered

26 Welding booth as per ISO standard 10

FUME EXTRACTOR as per ISO standard Cabinet dimension - 15.5" X 13" X 16.5" Cabinet material - 16 ga carbon steel wl polyster epoxy coating on all surface 27 10 Arm dimensions - 5" round fire resistant flexible hose 3 m Motor - Fractional horse power Electrical - 220 V, single phase, 50 Hz, on/off tongle switch Air Volume - Variable speed control 350 CFM to 50 CFM

28 Portable Pneumatic Shear. 3

29 Pipe Bending Machine (Hydraulic Type) 12 mm to 30 mm 1

30 Beading Machine with 380 mm throat clearance (with crimping rollers 1 PACKAGE - 57 MECHANIC MOTOR VEHICLE TOOLS AND EQUIPMENTS

NAME OF ITEM AS PER SYLLUBUS (With detailed Sl.no. Quantity specification)

1 Air blow gun with standard accessories 1

Air impact wrench with standard accessories, Torque range 69 - 770 2 4 NM (Max. 900 NM)

Air ratchet with standard accessories square drive ½ bolt, Max. torque 3 4 122 NM

4 Alternator assembly used for LMV 2

5 Car Jet washer with standard accessories, 90 PSI pressure trolly type 2

6 Carburetor repair tool kit 1

7 Cleaning tray 45x30 cm. 3

8 Coil spring compressor for suspension spring 1

9 Constant Mesh Gear box with stand for Dismantling and assembly. 1

10 Cut section models of shock absorbers 1

11 Cut section of cross ply and radial tyres 1

12 Cut section working model of Diaphragm clutch assembly. 1

13 Cut section working model of Single plate clutch assembly. 1

14 Cylinder liner- Dry & wet liner, press fit & slidefit liner 1 15 Demonstration board of MPFI system 1

16 Different type of Engine Bearing model ( All types) 1

17 Different type of piston model (8 types) 1

18 Drum brake assembly 1

19 Engineers stethoscope 1

20 Executive Auto Electrical tool kit 2

21 Front axle ( Rzeeppa Joint) with stand for Dismantling and assembly 1 22 Fuel feed pump for diesel 1

23 Fuel injection pump (Diesel) inline 1

24 Fuel injection pump dismantling tool kit with Universal Vice 2

Fuel injection pump, VE pump / Distributor fuel rotary pump (DPC) 25 2 pumps / along with special tools and accessories.

26 Garage stand (for LMV) 4 27 Glow plug tester 4 28 Horn and Horn relay car type (IMV) 2 29 Injector – Multi hole type, Pintle type 4

30 Injector cleaning unit 2

31 Injector testing set (Hand tester) 2

32 Lifting jack screw type 3 ton capacity 1

33 Lifting jack screw type 5ton capacity 1

34 Lifting jack screw type 20 Ton capacity 1

35 Oil pump for dismantling and assembling. 1

36 Piston Ring expander and remover. 1

37 Piston Ring groove cleaner. 4

38 Radiator cut section-cross flow 1

39 Radiator cut section-down flow 1 40 Radiator pressure cap 2 41 Starter motor axial type, pre-engagement type & Co-axial type 2 42 Tandem master cylinder with booster (LMV) 6 43 Thermostat Valve (Wax pellete type) 2 44 Ignition Timing lighte (for petrol engine) 1 45 Tread wear indicator 2 46 Tubed tyre of car 1 47 Tubed tyre of trucks 1

48 Tubed tyre of motorcycle 1

49 Tubeless tyre of cars 1 50 Tubeless tyre of trucks 1

51 Tubeless tyre repair kit 2

52 Tyre & split rim wheel assembly (LMV) 1

53 Vacuum assisted hydraulics brake assembly with vacuum booster 1

54 Valve Lifter (for engine) 1 55 Valve spring compressor universal. (for engine head) 2 56 Water pump for dismantling and assembling 3 57 Wheel cylinder 4

58 Wiper motor assembly 2

59 Working model of torque converter 1 Hydraulic jack HI-LIFT type -3 ton capacity, and 5 Ton capacity 60 1 (trolly type garage jack)

61 Pneumatic rivet gun with standard accessories 2 62 Tin smiths bench folder 600 x 1.6mm 1

63 Tube/ tyre vulcanizing machine 1 PACKAGE - 58 MRAC EQUIPMENTS

NAME OF ITEM AS PER SYLLUBUS (With detailed Sl.no. Quantity specification)

Gas leak detector for halogen gas-. Electronics type 1 9 (ROTHENBERGER/IMPERIAL/FRIG TOOLS,Rex/Equivalent)

Electric blower portable- complete with all accessories 1/10 HP or 2 3 higher

3 Stop watch-Digital type 4

4 Heating kit with infrared bulb- (200 w capacity) 4

5 Micron vacuum guage capable of reading up 20 microns. Digital type 4

Fin straightener/fin comb- Plastic for different finn spacing(5 nos in 6 6 one set)

Compressors testers for small hermetic compressor-Provision for connecting in let and outlet of compressor,electrical connection. 7 Indicating facilities for suction and discharge pressure,energy 4 meter,ammeter,voltmeter, LP, HP Switch fitted on a board(ROTHENBERGER/IMPERIAL/FRIG TOOLS/Equivalent)

Temperature &Humidity recorder- Record Automatically both Temparature and Humidity in set intervells continusaly and capable of 8 2 read and print recorded data using computer.(including PC suite Software) in 24 hours

9 Digital weighing machine -100 Kg, Size above 450x450 mm, SS body 2

Cylinder for 134 a- With valve and valve cover for R 134 a 10 1 Gas,Capacity 5 Kg,Painted as per rules

Three/Four door refrigerator(300L carrying with HC R600a) 11 2 (LG/SAMSUNG/Whirlpool/Equivalent)

Frost free Double Door refrigerator- 200L or above carrying with HC 12 blend refrigerant.With Suitable stabalizer(Not Retrofitted) 1 (LG/SAMSUNG/Whirlpool/Equivalent)

Inverter refregerator above 250 litres capacity.carrying with HC 13 refrigerant.With Suitable stabalizer 1 (LG/SAMSUNG/Whirlpool/Equivalent) Inverter split AC 1.5 ton, five star, Timer - 24 hr. dual on/off real setting timer, randum auto restart :32, main unit condenser - copper. 14 1 With Suitable stabalizer(Not Retrofitted) (LG/SAMSUNG/Whirlpool/Equivalent)

Ductable type Fan coil unit- with chilled water tubes blower,motor,filter, isolating valves - 2 nos, Fitted with 2 and 3 way 15 solinoid valve-230 V , compatible thermostat works with solinoid 1 valve, pipes and fittings to connect with FCU. Capacity 5 TR or Higher wit flexiable duct - assembled unit

Shell and tube DX chiller,5 Ton -with Cu tubing connecected to tube 16 1 sheets,end cover, connection pipes,with a base frame / stand.

Circulating water pump - 1 H.P with 1.5 mm thk stainless steel tank capacity 20 litres with in let/ outlet provision and isolating valves, 8 17 1 M, 20 mm dia spiral hose and hose connectors to fit shell and tube condenser.

Shell and tube type condenser- 5 Ton,copper tube with base 18 frame.inlet outlet connected with 20 mm Hose connector,SS Ball 1 valves,Refrigerant in and out conections.

19 Rotary hermetic compressor (2 ton) for air conditioner 1

Industrial type water purifier (RO Technology), 500 ltrs./hr. Suitable 20 1 pre filters and installations. 21 Water cooler , storage capacity 120 lts. (Voltas/Bluestar/Equivalent) 1 Power Press 2 Tons - Shank Dia. - 51 mm, Stroke - 6 - 38 mm, Throat 22 Distance - 102 mm, Table height from floor - 650mm, Fly wheel Dia - 1 350 mm, Motor - 1 HP Nibbling Machine - Throat Depth - 900 mm, Max. Circle Dia. - 740 23 mm, Length of stroke - 1 to 8 mm, No. of stroke / min. - 1440, Max. 1 Tool lift - 15 mm, Motor - 2 HP, Fully automatic

Spinning Lathe 24 Metal spinning lathe 22 SWG capacity, Bed length, with tool post, 1 fulcrum, all types of spinning tools with full accessories, 3 HP motor

Portable Nibbler 25 3 - 1.6 mm, 230 V, 50/60 Hz, 1.8 A, 400 W, 2300 rpm PACKAGE - 59 PAINTER GENERAL TOOLS AND EQUIPMENTS

NAME OF ITEM AS PER SYLLUBUS (With detailed Sl.no. Quantity specification)

1 Knife stopping (putty)3" 42

2 Knife Hacking 1.5 steel blade 42

3 Porcelain basin 450 ml 4

4 Pneumatic chippers (STROKE LENTH 90 mm) 10

5 Orbital wire brush 70x10x06 mm,0.30 gaugeor 2'*3'dia 42

6 Scaffold SIZE 8'×8' 20

7 Sliding T-Bevel 10" 42

8 Aero graph(air brush)HS 83 Gravity feed 42

9 TRESTLE( painter with stool) 24'*28'*24' 42

10 Combs steel 12" 20

11 Digital balance 1-2kg capacity 2

12 Weight per litre cup 100ml 4

13 FORD 1 cup NO.4 viscocity measurement 4

14 Stop watch digital 2

15 Electric oven for paint baking 10×5×9 FEET 1

16 DFT GUAGE machine(Digital) 2

17 Scartch hardness tester 430 p 2

18 HEGMAN guage(0-100 micron) 2

19 Steps ladder 3 meter (10 ft), Aluminium made 6 PACKAGE - 60 INSTRUMENT MECHANIC TOOLS AND EQUIPMENTS

NAME OF ITEM AS PER SYLLUBUS (With detailed Sl.no. Quantity specification)

1 Twiser fine point 125 mm 27

2 Eye glass 3” focus watch maker with aluminium frame 4

3 Pointer extractors (puller) 4'' with hardened legs 5

4 Flaring tool set 3/16" to 5/8" OD tubing 1

5 Pipe flaring tool (4.7mm to 16mm OD) 2

6 Flaring tool set,single type for tube(4.7mm to 16mm OD) 5

Differential pressure transmitter (pneumatic), Applicable gases - air or 7 nutral gases o/p - 4-20 mA, power supply - 24V dc, semitransparant 2 material, poly carbonate, size of pr. Inlet outside dia 6.2 mm

Pressure transducers training kits,capacitive Angular capacitor with 8 link and gear mechanism, 0 - 5 kg/cm² , sensor, variable capacitor, 1 12V DC, display 305 digit, digital

Pressure transducer training kit, cell servo type 0 - 5 kg/cm² , variable 9 1 resistance, 12 v dc Pneumatic caliberator dimension 15.25'' x 12'' x 7'', -12 to 300 psc, 0 - 10 2 24 mA, 0-30v

Pressure switches of various ranges Normally open, pressure range 11 8 upto 100 psc, single throw and double throw

Vacuum tester with pump, masximum vaccum, 3.2 cfm, power 115v, 12 1 7.6A, 1000W,overall size 16'' x 6'' x 10''

13 Flow nozzle, Aluminium or brass, in line form, medium - air or water 1

14 Integrated direct level indicator trainer (Hook type ) 1

15 Integrated direct level indicator trainer (sightglass type ) 1

16 Integrated direct level indicator trainer (float type ) 1 Static pressure and air purge type level indicator casing aluminium, 17 1 range 500 mm, glass tube, borosilicate

18 Resistance bulb Wheatstone bridge type 2

Temperature transmitter, pneumatic supply pressure 25 psi, air 19 1 connection1/4 '' OD poly tubing, range 0 - 100 ° C

20 Temperature transmitter electronic((input RTD ,TC ) 1

Digital temprature calibrator,mV/mA injector and measuring unit, 21 1 24V, maximum current 24 mA, size 96 x 200 x 47 mm

22 Electric actuators , open to no power, single phhase ac 1

23 Pneumatic actuators input pressure 3 - 15 psi 1

24 Hydraulic actuators input pressure 3 - 15 psi 1

25 Cut section models of various type of control valve 1

FIART/ field bus final control elements(two different type) HART 26 type valve positioner , automatic set up, fully digital PID control 1 capability, non polarity power input

Data acquisition system (DAS) High speed USB, compatible with MS 27 1 windows os, 24 bit programmable TTL input/output channel

ADC to DAC cards ±10V , inputoutput range , separate 0.1 % ADC 28 and DAC referance, 16 bit DAC system, 8DAC channels in 2 banks of 4 4PWA

29 Experimental set up for online conductivity measurement 1

30 Experimental set up for online pH measurement 1

31 Experimental set up for online dissolved oxygen measurement 1

8085 micro processor training kit µp 8085, memory 64 kb, display 6 32 2 digits, key - 24

Dead weight tester Range upto 700 bar, hydraulic type single piston, 33 1 oil operated PACKAGE - 67 ELECTRONICS ITEMS

NAME OF ITEM AS PER SYLLUBUS (With detailed Sl.no. Quantity required specification)

LCD TV (trainer kit) 1 230V, 21" LCD monitor, Block diagram on board, easy measurement 2 of voltage and observation of wave form on test points

LCD TV, 230V I/P, 32", LCD display, 2 4 (Panasonic/SONY/SAMSUNG/Equivalent)

LED TV (Trainer kit) LED TV Trainer kit having following features 1. The block diagram should be printed on single PCB. 2. Fault creation facilities should be provided by switches. 3. Having the 3 facility of easy measurement of Voltages and observation of 2 waveforms at any point. Also typical voltages and waveforms should be printed on the kit.and conforming to following specificationsA1. Display : 21”Diagonal Size

4 LED TV 230V I/P, LED Display 21'' 4

5 LED Television 50" With Cable Net Work. 230V, 50" LED Display 1 PACKAGE - 71 FIRE EXTINGUISHER

NAME OF ITEM AS PER SYLLUBUS (With detailed Sl.no. Quantity specification)

Fire buckets(10 ltrs) with stand As per IS 2546, galvanised mild steel fire bucket, size - minimum 9 1 liter, material - galvanised iron with anti corrossive treatment, bottom 14 of bucket shall be hemispherical. Outside of the fire bucket shall be painted with primer and fire red colour. The word 'FIRE' shall be written outside the bucket in bold black letter. The inside of the fire bucket shall be painted with primer and white. Stand with suitable height and povision for carring 5 buckets. ( 4 bucket and one stand)

Fire Extinguisher CO2, 2 KG capacity

2 Agent type - CO2 , Cylinder material - Seamless tempered steel gas 7 cylinder (as per IS 7285), Valve material - Plated brass, Handle/lever material - SS, IS specification - IS 2878, Hydrolic test pressure (cylinder) - 250 Kg/cm2 , Working pressure - 60 - 65 Kg/cm2

Fire extingusher (CO2) B C rated 3kg 3 Agent type - CO2 , Cylinder material - Seamless tempered steel gas 5 cylinder (as per IS 7285), Valve material - Plated brass, Handle/lever material - SS, IS specification - IS 2878, Hydrolic test pressure (cylinder) - 250 Kg/cm2 , Working pressure - 60 - 65 Kg/cm2

Fire Extinguisher (CO2, 4.5 KG CAPACITY) 4 Agent type - CO2 , Cylinder material -Seamless tempered steel gas 13 cylinder (as per IS 7285), Valve material - Plated brass, Handle/lever material - SS, IS specification - IS 2878, Hydrolic test pressure (cylinder) - 250 Kg/cm2 , Working pressure - 60 - 65 Kg/cm2

Fire extinguishers Dry chemical 5 Kg - 5 Capacity - 5 Kg, IS specification - IS 2171, Hydraulic test pressure - 2 30 Kg/cm2

First aid kit - Basic first Aid Box suitable for providing first aid to 6 7 industrial accident victim sd/-

Principal .G .}o ,l o ?n

rm om -{v oz oa

o= xn z o -l a TD ro t- U, m a a a? a o C x m Pac[aer . 5 2,