DOCSLIB.ORG

Powerboss Part

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Powerboss Part PowerBoss Part PowerBoss Parts - The very first carpet sweeper was created in Iowa, USA by Daniel Hess. It was created in the 1860's and from that time scrubbers and different floor cleaning machines have significantly changed since that time. His version had a rotating brush together with an elaborate arrangement of bellows situated on top to generate suction. We are lucky today that scrubber machines and vacuum cleaners need a lot less effort to run and are electrically driven. The 4 Key Types of Floor Scrubber Presently, there are four main types of floor scrubbing machines obtainable on the market. Every one of them has their very own individual features that make them perfect for different work environments and market sectors. Several models are battery operated, some are compact and could be easily packed away and kept, a few models are a ride-on type. The typical model is where the operator walks at the rear of the machine and guides it around the section that requires scrubbing. There are also floor scrubbing machinery proficient at cleaning large places all on their own in view of the fact that they have an artificial or computer mind. These automatic models could be programmed to run without an operator. 1. Fold-away Floor Scrubbers Fold-away floor scrubbers are perfect in small companies where area is restricted. Vacuums and floor cleaning equipment should be packed away effectively in storage areas and small cupboards. This is when the folding machine style comes in handy. With this particular sort of floor scrubber, the main arm that is used in order to maneuver the machinery can be folded in several areas, making the machine compact if it is not being utilized. 2. Mains & Battery Operated Mains operated floor scrubbers are much more popular than the battery operated model, yet the battery operated type is perfect for locations with restricted power sockets or sockets are really far from work site and extended power options are not available. The battery operated model is best suited for small areas like for example washrooms with hard to reach areas that will be awkward to clean with a trailing power lead. The battery can be charged and utilized for around 4 hours before re-charging is needed. The battery can likewise be replaced if needed. 3. Walking or Ride-on devices The ride-on machine is a great choice if the ground scrubber you require is for big areas like inside of warehouses or retail interiors. This version allows the worker to maneuver the machine around obstacles and corners efficiently and easily because the operator has a good vantage point. These kinds of floor scrubbing equipment come outfitted with a two hundred fifty liter water tank plus one more tank to collect the dirty water. Walking machines are similar models which can be operated by somebody walking behind the machine and steering the scrubber. 4. Robotic Floor Scrubber devices The robotic floor scrubber might be one more alternative to think about because this model is proficient at scrubbing big floors that have minimal obstructions. These models have sensors installed in order to allow the machine the ability to steer clear of humans, doors, walls and stairs. It can accomplish the cleaning task easily once you start the unit up and set the program, it would clean all by itself. These floor scrubbers are proficient at cleaning one thousand square feet with each 4 hour charge. Floor Scrubbing Technology Companies have to know the model which best suit their requirements because there are numerous different versions capable of serving all their requirements. To summarize, the foldable scrubber is perfect for accessing inaccessible and small areas like for instance the washrooms, while the ride-on version of floor scrubber could provide the operator with much more comfort and visibility. Furthermore, ride-ons are proficient at cleaning numerous hours without a charge or refill. Robotic models allow the cleaning to take place all by itself, enabling individuals to accomplish tasks elsewhere. Battery operated floor scrubbers are best suited for cleaning locations far away from power sockets. These models have the additional advantage of not getting the power lead tangled underneath the equipment or all-around door frames..
Load more

Recommended publications
  • Mop Bucket Vs Micromatic
    ™ Mop and Bucket vs. Micromatic 13E Concern Mop and Bucket Micromatic™ 13E Overall Floor The first time the mop is dipped into the mop bucket, the water becomes dirty and The Micromatic 13E floor scrubber always dispenses a solution mixture of Cleanliness contaminated. The cleaning chemical in the mop bucket water will start to lose its clean water and active chemicals. Brushes on the scrubber provide intense effectiveness. The dirty water is then spread on the floor and left to dry. The floor agitation to loosen and break up tough soils. The vacuum on the scrubber is left wet with dirt and grime still in the water. then removes the water and dirt, leaving the floor clean, dry, and safe. Grout Cleanliness Cotton or microfiber mops are unable to dig down and reach into grout lines on tile Micromatic 13E uses brushes and the weight of the machine to push the & Restoration floors to loosen the soil or remove the dirty water. Mop fibers skim over the tile brush bristle tips deep into the grout lines to loosen embedded soils. The surface and glide over the top of grout lines. Dirty water then fills the grout lines vacuum and squeegee system is then able to suck the water up and out of and when left to dry, will leave behind dirt. the grout lines, leaving them clean and dry. Regular use of the Micromatic 13E helps prevent the time consuming and expensive project work of grout restoration. Baseboard and While swinging mops back and forth over a floor, the mop will sling dirty water up The semi-enclosed scrub deck of the Micromatic 13E keeps the dirty water Floor Fixtures against baseboards, table legs, and other on the floor fixtures.
    [Show full text]
  • Floor Cleaning Manual
    FLOOR CLEANING MANUAL TILED AREAS AQUATIC CENTRES ENVIROFLUID ENVIRONMENTAL FLUID SYSTEMS GPO Box PO1080, BOX Melbourne 1280 VIC 3001 Warrnambool1800 777 580Vic 3280 [email protected] 777 580 www.efsgroup.com.au [email protected] www.envirofluid.com Environmental FluidEnvirofluid Systems 2 Aquatic Centre Floor Cleaning with ActiveEco System Restoring Tiled Areas in Aquatic Centres Equipment required: 1. ActiveEco Restore 2. ActiveEco Rejuvenate 3. ActiveEco Floor Pad 4. Blue floor cleaning pad 5. Variable speed floor scrubber 6. Measuring Jugs 7. Mop and Bucket 8. Suction system eg. Wet Vac or Autoscrubber 9. Hose Deep clean Step 1 (acid step) Equipment: Rotary Scrubber + Blue FM pad Mop bucket, Measuring Jugs Chemical: ActiveEco Restore Method: 1. Prepare area by removing any loose soiling. Only clean an area of a size which can be managed within 30 – 40 minutes. About 50 m2. 2. Prepare a 1:5 Solution of ActiveEco Restore in mop bucket (8 litres water + 2 litres ActiveEco Restore). Apply this solution to the floor area with a mop. Ensure that the entire area is thoroughly wetted. 3. Do not scrub. Allow 15 minutes dwell time. Ensure that the floor does not dry out during this time. 4. Scrub the area using the rotary scrubber fitted with a blue FM pad. Use the slower speed setting if available (aprox 150rpm) 5. Extract the resultant slurry using an autoscrubber, wet vacuum or if possible hose down drain. 6. Thoroughly rinse the area with clean water before proceeding to Step 2. Note: Where deep grout lines and sloping flooring exists, the technician must ensure that the floor area stays wet with solution during the dwell time and when scrubbing.
    [Show full text]
  • Lead Exposure Control
    OSHA standard (29 CFR 1926.62) for lead exposure Notes Lead Exposure Control Preparation 1. Read Applicable Background information and related Company Policy Chapter. 2. Make _____ Copies of this Lesson Plan for Personnel 3. Make Transparency, procure transparency pens, etc. 4. Coffee, tea, snacks Material 1. Personal Protective Equipment the emloyee is expected to wear (see page 11) 2. Blasting Equipment the emloyee is expected to use Objective By the end of this session, personnel shall be able to discuss: 1. and Define “Engineering Controls” 2. and give examples of the following Engineering Controls: · Substitution · Isolation · Ventilation 3. Work Practice Controls to include: · Housekeeping · Personal Hygiene Practices · Washing and Eating Facilities 4. The Importance of Periodic Inspection and Maintenance 5. Employee Training Requirements 6. Lead Removal Operation Procedures Background Until the Company performs an employee-exposure assessment and determines the magnitude of the exposures actually occurring during the lead-related activity, the Company must assume that employees performing that task are exposed lead concentrations and the Company is required to provide respiratory protection appropriate to the task's presumed exposure level, protective work clothing and equipment, change areas, hand-washing facilities, training, and the initial medical surveillance prescribed by the OSHA Standard. Lesson Notes Engineering Controls Engineering controls, such as ventilation, and good work practices are the preferred methods of minimizing exposures to airborne lead at the worksite. The engineering control methods that can be used to reduce or eliminate lead exposures can be grouped into three main categories: (1) substitution, (2) isolation, and (3) ventilation. Engineering controls are the first line of defense in protecting workers from hazardous exposures.
    [Show full text]
  • The Power of Prep Surface
    22 D+D DECEMBER 2014 Q+ Got a concrete problem? Concrete A Ask the experts: [email protected]. By Fred Goodwin, FICRI, FACI, BASF Construction Chemicals he success or failure of any concrete coating or repair application is likely to be determined before the first drop of product ever touches the The Power of Prep surface. Surface preparation of con- Proper surface preparation on concrete means T crete is probably the most important consideration for successful coating and the difference between coating success and failure. repair material application. The Society for Protective Coatings’ ations. However, SSPC SP-13 states “An ac- scarifying, flame blasting, shotblasting, and standard SSPC SP-13/NACE No. 6 Surface ceptable prepared concrete surface should the use of surface retarders. ICRI 310.2 Preparation of Concrete defines surface be free of contaminants, laitance, loosely ad- Selecting and Specifying Concrete Surface preparation as: “The method or combina- hering concrete, and dust, and should pro- Preparation for Sealers, Coatings, Polymer tion of methods used to clean a concrete vide a sound, uniform substrate suitable for Overlays, and Concrete Repair discusses surface, remove loose and weak materials the application of protective coating or lining each method. and contaminants, repair the surface, and systems.” Whatever the method, the goal is an roughen the surface to promote adhesion.” Common concrete surface preparation acceptably prepared concrete surface. Let’s methods include abrasive blasting, acid take
    [Show full text]
  • T380AMR Deployment Process and Training Report
    Tennant Deployment and Training Checklist Tennant Autonomous T380AMR 1. Client/site name and store number: Click or tap here to enter text. 2. Dates of installation and training: Click or tap to enter a date. 3. Site location: Click or tap here to enter text. 4. Point of contact email and phone (Store Manager, 3rd shift Asst. Mgr., Maintenance Supervisor): Receive Weekly Name Title Email Phone Summary Y/N 5. Tennant Deployment Team: Click or tap here to enter text. Click or tap here to enter text. 6. Machine Serial Number: Click or tap here to enter text. Unpacking -Confirm shipment of scrubber, off-board charger, and packet of home markers. Verify storage location -Verify charging and storage location has adequate ventilation and power outlet -Confirm or determine permanent home location(s) with site supervisors 1 Rev. 8/2020 ©2020 The Tennant Company. All rights reserved. Robot Operator Training Process This document outlines the proper deployment and training for each operator of a T380AMR scrubber. A Tennant trainer will instruct trainers and operators regarding the subject matter of each point below. After completing each of the listed points, the manager/supervisor will check off the box, confirming that the operator has received that instruction. The operator will then review the document in its entirety and only sign after confirming its truth and accuracy. The Tennant trainer will then sign confirming the completion of the form as described. Installation, setup, and inspection of machine components -Attach squeegees, pads or brushes, add water for ec-H20 Nanoclean or cleaning solution -Inspect hoses for blockages -Test connectivity (ROC Icon is illuminated) -Test small section of floor space in manual mode -Go over site preparation techniques to perform prior to scrubbing (pre-sweep, check for obstacles) 7.
    [Show full text]
  • Model: MC32036QP MC32036CE 320 Floor Scrubber Traction Driven
    320 Model: MC32036QP Floor Scrubber MC32036CE Traction Driven OPERATION SERVICE PARTS CARE Revised 9/05 TABLE OF CONTENTS Page Safety Instructions 1 Electrical Requirements 2 Control Panel Identification 3 Squeegee Adjustments 4 Operating Instructions 5 Maintenance of Machine 6 & 7 Main Polyethylene Components 8 & 9 Recovery Tank 10 Solution Tank 11 Drive Assemblies 12 &13 Main Frame 14 & 15 Console Assembly 16 & 17 Scrubhead Assembly 18 Squeegee Mechanism Assembly 19 Squeegee Assembly Complete 20 Wiring Diagram Standard Model 21 Wiring Diagram CE Model 22 IMPORTANT SAFETY INSTRUCTIONS CAUTION Operators must read and understand this manual before operating or maintaining this equipment. • Keep hands and feet clear of moving parts while machine is in operation. • All switches must be in the “OFF” position when charging batteries. • Electrical motors and components can cause an explosion when operated near explosive materials or vapors. Do not operate this machine near flammable materials such as solvents, thinners, fuels, grain dusts, etc. • Make sure all switches are turned “OFF” and battery connections are removed before performing any maintenance procedures. • Store or park this machine on a level surface only. • These machines are designed for level floor operation only. DO NOT OPERATE on ramps or inclines. • Battery acid can cause burns. When working on or around batteries, wear protective clothing and safety glasses. Remove metal jewelry. Do not lay tools or metal objects on top of batteries. • This machine is not suitable for picking up hazardous dust. • Charging batteries generates explosive gases. DO NOT CHARGE BATTERIES WHEN OPEN FLAMES OR SPARKS ARE PRESENT. DO NOT SMOKE. Make sure the charger is turned off before disconnecting it from the batteries.
    [Show full text]
  • Floor Scrubber Maintenance Chart
    SCRUBBER MAINTENANCE TIPS Important: Before doing any maintenance on the scrubber, be sure the power is turned OFF or the batteries are disconnected. Daily Weekly 1. Raise the squeegee assembly off the floor and 1. Check fluid level in batteries. wipe the blades down with a damp towel. 2. Check batteries for loose or corroded cables. Be sure to store squeegee in the UP position. 3. Keep battery tops clean from corrosion. 2. Tilt machine back (after squeegee is UP), then remove and clean the pad driver(s)/brush(es). 3. Drain both recovery and solution tanks Monthly completely of water and solution. 1. Check the scrubber for leaks and tighten any 4. Rinse out recovery tank with clean water, and loose fasteners. remove any debris from inside tank. Remove 2. Lubricate all grease points and pivot points clear lid off the tank and remove drain hose with silicon spray or approved grease. cap to allow tank and hose to dry/breathe. 3. Place machine over a floor drain. Flush the 5. Remove the float shut-off filter inside the solution system by pouring 3 gallons of hot recovery tank and rinse it with clean water. water and approved alkaline detergent into 6. Clean the machine with an approved cleaner the solution tank and running the machine and a damp towel. (with solution control on) for 45 seconds. 7. Recharge the batteries. Turn machine off and let it sit overnight. The next day, drain the remaining solution and Daily Storage rinse the solution tank out with clean water. ALWAYS... DRAIN both tanks, store machine INDOORS, in a DRY area, in the UPRIGHT position, with the SQUEEGEE UP off the floor, and the PAD DRIVER/BRUSH UP off the floor.
    [Show full text]
  • Niebling Cleaning-Brushes-Systems Web.Pdf
    KATALOG 2.6 EN C A T A L O G U E HACCP Applications Cleaning Brushes +Systems Wet cleaning Dry cleaning Shadowboard 5S MEETS HACCP, IFS AND FDA niebling.com TABLE OF CONTENTS CLEANING BRUSHES AND SYSTEMS Page 3 Scrubbers and brooms for handles Page 4 Floor scrapers, wet cleaning tools and tube brushes for handles Page 10 Mop systems Page 16 Squeeges and pullers for handles Page 19 Six-safe-handles and spare parts for handles Page 22 Resin programme Page 25 niebling Technische Bürsten GmbH Hand brushes and handle brushes Page 27 Alkali resistant brushes Page 32 Heat resistant brushes up to 200 °C / 250 °C Page 34 Sealing jaws and wire brushes Page 35 Hand brushes and food brushes Page 38 Glassware brushes Page 42 Tube brushes Page 44 Scrapers, spatulas, hammers and pads Page 47 Shovels and buckets Page 51 Holder and storage systems Page 56 Spray guns, hoses, accessories and cleaning cloths Page 58 Technical brushes A-Line – Antibacterial pens Page 62 TECHNICAL BRUSHES (Examples) Page 60 The catalogue „Technical Brushes“ gives an overview of Niebling‘s large technical brushes range. TRADITIONAL BRUSH PROGRAM Order now! Barrel and tank brushes, barrel and tank scrubbers Page 62 Phone +49 (0) 9843 9894-0 Scrubbers and wire scrubbers, hand, wire and handle brushes Page 63 [email protected] Handle brushes Page 64 Pipeline, filter frame brushes and sponge rubber balls Page 66 Pipeline, hose and nozzle brushes Page 67 Hole, cup and handle brushes Page 68 Laboratory and bottle brushes Page 69 Imhoff funnel, glass and jug brushes Page 70 Scrubbers, brooms and hand brooms, brooms and handles Page 71 car wash brushes Page 72 MACHINE BRUSHES Labelling and other machine brushes Page 73 TECHNOLOGY Technical information on hygiene regulations Page 74 Bristle materials Page 74 Maintenance and storage of working equipment Page 75 NEWS & NEW PRODUCTS: Material science to traditional brushes program Page 75 Our program is constantly being expanded.
    [Show full text]
  • Concrete Surface Preparation for Floor Coatings
    TECHNICAL BULLETIN Concrete Surface Preparation for Floor Coatings Page 1 Preparing Concrete Slab potentially a failure in any coating system applied where The most difficult aspect of satisfactorily coating a hydrostatic pressure exists. Because the effects of hydro- concrete floor is preparing the floor to ensure the static pressure can not be predicted, there exists no coating system will adhere. The following tests should be guarantee by Diamond Vogel that any coating will be able performed to determine the extent of surface preparation to withstand the forces capable of causing failure in the required to ensure a successful coating application. concrete substrate. Test for Curing Compound: Test Adhesion of Previous Coatings: Most concrete has a chemical curing agent applied at the Some coating systems do not require the complete time it is poured. Such chemical curing agents frequently removal of previously applied coatings in order to repaint prevent adhesion of coatings. Test for curing compound the floor, but all existing coating that remains that is by applying a muriatic acid solution to bare concrete. If the painted over must be tightly adherent. After required solution does not react (bubble vigorously), when in mechanical and chemical cleaning of the surface is contact with the concrete, the presence of a curing com- accomplished, cut 2”x2” “X” cross-hatches into remaining pound is indicated. Check various areas of the floor. Curing coatings. Then, apply 6” stripes of duct tape over the X’s, compounds must be either chemically or press the duct tape firmly onto the floor, and then quickly mechanically removed prior to coating.
    [Show full text]
  • T390 Brochure
    REINVENT HOW THE WORLD CLEANS T390 Walk-Behind Scrubber Consistent Performance and Productivity The T390 is a highly productive and reliable self-propelled floor scrubber. Its ease of use and maneuverability allow for quick cleaning in medium sized spaces found in schools, hospitals and retail stores. Durable Construction Maneuverable Design with Easy Daily Maintenance Scrub deck made out of tough steel High Productivity Yellow touch points help reduce material, with roller guide wheels to Increase productivity with the dual breakdowns by simplifying protect the facility. disk cleaning path while still having preventative maintenance. the maneuverability of a mid-size scrubber. Inside the T390 1 1. Intuitive control panel 4. Consistent water pick- with an indicator light up with durable “V” when solution tank level shaped squeegee design is low. and standard Linatex® squeegee blades. 2. Easy-to-inspect in-line solution filter. 5. Simple no-tools brush and squeegee blade 3. Excellent productivity replacement. 3 from large solution tank 2 paired with wide cleaning path. 5 4 T390 Specifications FEATURE SPECIFICATION Cleaning path 28 in / 700 mm Productivity (per hour) theoretical max 26,950 ft2/hr / 2,503 m²/hr Estimated coverage (per hour)* 17,846 ft2/hr / 1,658 m²/hr Scrubbing speed 2.2 mph / 3.5 kmh Scrub head raise/lower manual with foot pedal Brush/pad speed 200 rpm Brush/pad pressure 69 lb / 31.5 kg Solution tank capacity 17.0 g / 65 L Recovery tank capacity 18.5 g / 70 L Battery run time - up-to hours (150AH Wet Battery)** 2.3 Battery voltage 24 V (2 x 12) Dimension (LxWxH) 48.0 x 29.4 x 37.8 in / 1,220 x 748 x 960 mm Squeegee width 39.7 in / 1010mm Weight (with heaviest battery) 387 lb / 176 kg Sound level (operator's ear)*** 73 dB Specifications subject to change without notice.
    [Show full text]
  • Floor Scrubber & Polisher With
    EB0491-FP1000-10.13_Layout 1 31/10/2013 11:10 Page 1 Floor Scrubber & Polisher with Vac Model FP1000 Care and Use Instructions Earlex Inc 8261 Highway 73, Suite F, Stanley, N.C. 28164, USA Toll Free: 888-783-2612 Email: [email protected] Website: www.ewbankusa.com DO NOT VACUUM LIQUIDS WITH THIS PRODUCT EB0491-FP1000-10.13_Layout 1 31/10/2013 11:10 Page 2 ® Thank you for purchasing your Ewbank Floor Scrubber & Polisher with Vac, we hope you enjoy using it. Please read the manual carefully to get the most out of your product. Pack Contents: 1 - Main Body 2 - Scrubbing, Polishing, Waxing and Vacuuming Head 3 - Handle Assembly 4 - Buffing Pads (blue) EB0129 5 - Scouring Pads (white) EB0130 6 - Scrubbing Brush Plates EB0131 7 - Velcro-Backed Plates EB0132 8 - Care and Use Instructions EB0491 9 - Gloss Floor Polish Sample (Not Shown) FP555 Read the Care and Use Instructions before using the Ewbank ® Floor Scrubber & Polisher with Vac and make sure that… • The power cord is in perfect condition. • All packaging materials are removed from the machine. 2 EB0491-FP1000-10.13_Layout 1 31/10/2013 11:10 Page 3 Safety Instructions - CAUTION • DO NOT move the unit by pulling on the power cord. • DO NOT allow the unit to be used by children. • DO NOT modify the unit in any way - this is dangerous and will also invalidate the warranty. • DO NOT handle the unit with wet hands. WARNING! • This product is not a toy. • Always unplug the Ewbank ® Floor Scrubber & Polisher with Vac when not in use.
    [Show full text]
  • Remote Controlled Autonomous Floor Cleaning Robot
    International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8, Issue-2S11, September 2019 Remote Controlled Autonomous Floor Cleaning Robot R.Senthil Kumar, Vaisakh KP, Sayanth A Kumar, Gaurav Dasgupta Abstract— Cleanbot is a smartphone-controlled floor cleaning paradigm shift in the field of mopping to more robot which cleans a dirty floor automatically using a set of technologically sound machinery. commands given to your device by a smartphone. Cleanbot has two modes of cleaning – Mopping and Wiping. These two II. HISTORY AND EVOLUTION OF MOPPING variations can be dedicatedly used in various applications in the cleaning industry and can break the manual labor in terms of A. History of Mopping cleaning is concerned. The device communicates through Bluetooth technology via a HC05 Bluetooth module that will be The mop has been a very important invention in terms of used to exchange commands to the microcontroller -Arduino addressing the history of society as well as being a part of the UNO. The robot is given power by a 12V lead-acid battery, the apt evolution of house wares#. Thomas W. Steward, an voltage requirement used for all motors here. The driver motors African-American inventor invented the mop. Steward's deck uses 100 rpm type while the run with mops 60rpm plastic geared mop was made of yarn and became an instant hit in terms of motors attached to them. Essentially Cleanbot has a very discrete design in terms of compactness and usability as it is very handy usability in household and cleaning in industries and factories and easy to operate.
    [Show full text]