DOCSLIB.ORG

Creating a Simulation Script for a Fiber Optic

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Creating a Simulation Script for a Fiber Optic | Lund University Lund University, with eight faculties and a number of research centers and specialized institutes, is the largest establishment for research and higher education in Scandinavia. The main part of the University is situated in the small city of Lund which has about 112 000 inhabitants. A number of departments for research and education are, however, located in Malmö and Helsingborg. Lund University was founded in 1666 and has today a total staff of 6 000 employees and 47 000 students attending 280 degree programs and 2 300 subject courses offered by 63 departments. Master Program in Energy-efficient and Environmental Building Design This international program provides knowledge, skills and competencies within the area of energy-efficient and environmental building design in cold climates. The goal is to train highly skilled professionals, who will significantly contribute to and influence the design, building or renovation of energy-efficient buildings, taking into consideration the architecture and environment, the inhabitants’ behavior and needs, their health and comfort as well as the overall economy. The degree project is the final part of the master program leading to a Master of Science (120 credits) in Energy-efficient and Environmental Buildings. Examiner: Maria Wall Supervisor: Marie-Claude Dubois Secondary Supervisor: Jouri Kanters Keywords: Solar lighting, Simulation, Daylight, Fiber optics, LEED, Illuminance, Glare. Thesis: EEBD–14/01 Program Scripting & Evaluating Fiber Optic Daylighting Systems Abstract Keeping in mind the positive health- and emotional effects on hum an beings, using daylighting over electric lighting, this thesis demonstrates the use of an innovative daylighting technology, fiber optics. The objective of using the fiber optic daylighting system is to transfer daylight from exterior to interior into rooms with small or no w indows. In this project, a simulation script was created for the SP4 fiber optic daylighting system from the company Parans Solar Lighting AB. The script was programmed in Grasshopper, using Rhinoceros as an interface and a detailed study guide completed. The environmental certification system Leadership in Energy and Environmental Design (LEED) was chosen as a guideline to meet certain credit points for the horizontal illuminance desired in a specific area. The fiber optic daylighting system was installed in the laboratory of Lund University, Energy and Building Design. Real measurements were taken on a sunny day, for the reason that the system solely works with direct illuminance. A case study was then carried out to evaluate the accuracy and functionality of the script. In a second phase, a parametric study was performed where the climate was varied. Four countries were selected using a solar map, with ratios of diffuse to direct irradiation. The choice of cities was influenced by where the company Parans has most of their clients. Additionally, one Daylight Autonomy simulation was completed. Finally, a d etailed glare risk assessment was performed to evaluate the possible visual discomfort of the daylighting system. The script created is useful to save time when planning the systems’ use and can be adjusted to different locations and room types. Furthermore, it could be used to help to optimize the installation and to estimate the optimum amount of cables used. 2 Program Scripting & Evaluating Fiber Optic Daylighting Systems Acknowledgements This thesis was formed as a p art of the Master Program in Energy-efficient and Environmental Building Design. We are especially grateful to our supervisor and daylighting expert Marie-Claude Dubois who showed interest, helped and supported us exceptionally throughout this work. She helped us keep a positive attitude during the development of the thesis project and encouraged us in every way she saw possible. We are profoundly thankful for our secondary supervisor Jouri Kanters, whose kind presence and excellence in Grasshopper computer programming technology came in good use when assisting us developing the fiber optic simulation script. We are grateful to Maria Wall for supporting us and providing important information during the study. We thank Karl Richard Nilsson from Parans Solar Lighting AB for his countless support and provision of the project, and Maria Nordberg from White Architects for providing this project. Additionally, we are thankful for the financial support from Parans who made it possible for us to go on an unforgettable study visit to the United States to meet with two board members of the U.S. Green Building Council. We would like to thank Rob Hink, principal and senior vice president of the LEED faculty and Brian Lomel, principal and sustainability consultant for LEED, for taking time to interview with us. Furthermore, we would like to thank Campus Vänner for their funding. We wish to acknowledge the help and support from Henrik Davidsson, Niko Gentile and Ricardo Bernardo. We thank our good friend and classmate Alejandro Pacheco Diéguez for his help and encouragement. We express great gratitude to everyone else at the department, who brightened our days with great support and interesting conversations. Special thanks to our partners, family and close friends for all their moral support, true interest and believing in us. Finally, we are truly grateful to the Eliasson foundation for sponsoring the program of Energy-efficient and Environmental Building Design. 3 Program Scripting & Evaluating Fiber Optic Daylighting Systems Table of Content Abstract ............................................................................................................. 2 Acknowledgements ........................................................................................... 3 Terminology ...................................................................................................... 7 Acronyms / Abbreviations 7 Terms and Definitions ....................................................................................... 8 Photometric Units 8 Luminous Flux 9 Illuminance 9 Luminance 9 Luminous Efficacy 10 Daylight Autonomy 10 RGB Values vs. Wavelengths 10 Transmittance vs. Transmissivity 10 Glare 11 Disability Glare 11 Discomfort Glare 11 Daylight Glare Probability 11 Daylight Glare Index 11 Window to Floor Ratio (WFR) 12 Daylight Factor 12 High Dynamic Range (HDR) Image 12 Structure and Short Summary of the Thesis .................................................... 13 1 Introduction ............................................................................................. 15 1.1 Background and Problem Motivation 16 1.1.1 Parans Lighting System 16 1.1.2 Environmental Certification Systems 18 1.1.3 Environmental Certification System LEED – Daylight Part 19 1.1.4 Simulation Programs Rhinoceros and Grasshopper 20 1.1.5 Problem Motivation 21 1.2 Overall aim and concrete and verifiable goals 21 1.3 Scope 22 2 Literature Review .................................................................................... 23 2.1 Studies about Daylighting Technologies 23 2.2 Studies about Benefits of Daylight (Health and Performance) 24 2.3 Earlier Studies about Energy Savings, using Fiber Optic Lighting Systems 24 2.4 Earlier Studies about Risk of Glare 25 3 Methodology / Model .............................................................................. 26 3.1 Fiber Optic Lighting System 26 4 Program Scripting & Evaluating Fiber Optic Daylighting Systems 3.2 Creating a new Simulation Script 30 3.2.1 Geometry in Grasshopper 30 3.2.2 Material Properties 31 3.2.3 Simulations in Grasshopper 32 3.2.4 Output in Rhinoceros 34 3.3 Case Study for Verification 34 3.3.1 Calculation of Surface Reflectances 36 3.3.2 Simulation Script 37 3.4 Parametric Study 38 3.4.1 Daylight Autonomy 40 3.5 Glare Assessment 40 3.5.1 Assessment of the Real Scene 41 3.5.2 Assessment of the Modelled Scene 43 4 Results ..................................................................................................... 44 4.1 Simulation Script 44 4.2 Measurements and validation 45 4.2.1 Weather Data 45 4.2.2 Real Measurements vs. Simulations 46 4.3 Parametric Study 47 4.3.1 Average Illuminance vs. Percentage of Illuminance between 300 and 3000 lux. 47 4.3.2 Optimum placement for San Francisco 48 4.3.3 Optimum placement for Copenhagen 49 4.3.4 Comparison of locations 50 4.4 Daylight Autonomy 51 4.5 Glare Assessment 51 4.5.1 Assessment of the Real Scene 51 4.5.2 Assessment of the Modelled Scene 54 4.6 Summary of Results 57 4.6.1 Simulation Script 57 4.6.2 Measurements and validation 57 4.6.3 Parametric Study 57 4.6.4 Daylight Autonomy 57 4.6.5 Glare Assessment 57 5 Discussion ............................................................................................... 58 5.1 Simulation Script 58 5.2 Measurements and validation 58 5.3 Parametric Study 59 5.3.1 Daylight Autonomy 59 5.4 Daylight 60 5.5 Glare Assessment 60 6 Conclusion ............................................................................................... 61 5 Program Scripting & Evaluating Fiber Optic Daylighting Systems 6.1 Limitations 62 6.1.1 Limitations of the Simulation Script 62 6.1.2 Limitations Related to Measurements and Validation 62 6.1.3 Limitations of glare study 63 6.2 Further Development and future work 63 References ....................................................................................................... 65 Appendix A: Calculation of Transmissivity .................................................... 69 Appendix B: User Guide ................................................................................
Load more

Recommended publications
  • Design and Fabrication of Evacuated Tube Solar Thermal Collector for Domestic Hot Water
    JOURNAL OF COLLEGE OF EDUCATION….. 2016…….NO.3 Design and Fabrication of evacuated tube solar thermal collector for domestic hot water Dr. Alaa H. Shneishil Al-Mustansiriyah University, College of Education, Physics Department ABSTRACT The objective of this research is to design and fabricate solar water heating system by Investment defective materials in Iraq for domestic sector applications in order to encourage national industry. Defective neon light tube with length 120 Cm and diameter 3 Cm has been used as an outer pipe. Copper pipe with length 125 Cm and diameter 1 Cm is placed inside the glass tube and close the space between them by circular shell that is used as an inner absorber material after painting it by black non brightness coating. The space between the outer glass tube and the inner copper pipe is evacuated by using small compressor. The evacuated tubes are connected from the upper side with insulated storage tank and from lower side with circulation pump. The evacuated tubes are placed in the focal line of reflective surfaces. The efficiency of the fabricated solar collector has been measured and compared with uninsulated storage tank which put in the same conditions. These measurements are done with and without reflective surfaces. The results indicated that the temperature of water in the evacuated tube with reflective surfaces reach to 59.5 °C while in the evacuated tube without reflective surfaces reaches to 44.3 °C. The temperature of water in the evacuated tube without circulation pump reach to maximum value which about 85.3 oC. This value is greater than that of the case with circulation pump.
    [Show full text]
  • United States District Court Eastern District of Michigan Southern Division
    2:07-cv-13150-GCS-SDP Doc # 38 Filed 08/12/08 Pg 1 of 37 Pg ID 1255 UNITED STATES DISTRICT COURT EASTERN DISTRICT OF MICHIGAN SOUTHERN DIVISION ALTAIR ENGINEERING, INC., Plaintiff, Case No. 07-CV-13150 HON. GEORGE CARAM STEEH vs. LEDdynamics, Inc., Defendant. ___________________________________/ ORDER RESOLVING CLAIM CONSTRUCTION DISPUTE Plaintiff Altair Engineering, Inc. (Altair) has filed suit against defendant LEDdynamics, Inc. (LEDdynamics) for patent infringement arising out of the sale of fluorescent tube replacement lights. Now before the Court are the parties competing briefs regarding claim construction. Both sides have filed lengthy opening briefs, response briefs, and voluminous exhibits. The Court has carefully considered all of the papers filed. Oral argument was heard on July 31, 2008. For the reasons set forth below, the Court adopts the claim construction argued by LEDdynamics. I. INTRODUCTION Altair is the owner by assignment of United States Patent No. 7,049,761 (‘761 patent). The ‘761 patent issued on May 23, 2006. (Doc. 23, Exhibit A). It covers light- emitting diodes (LEDs) based fluorescent tube replacement lights. According to Altair, the invention seeks to replace and improve upon traditional fluorescent light tubes which have as their shortcomings a short life expectancy, a tendency to fail if subjected to vibration, the consumption of high amounts of power to operate, and general 2:07-cv-13150-GCS-SDP Doc # 38 Filed 08/12/08 Pg 2 of 37 Pg ID 1256 unreliability. LEDdynamics, on the other hand, alleges that the invention was intended to mount fluorescent tubes in a conventional fluorescent fixture or socket, not necessarily to produce the same lighting effect.
    [Show full text]
  • New Lighting—New Leds
    New Lighting—New LEDs Aspects on light‐emitting diodes from social and material science perspectives Editors Mats Bladh & Mikael Syväjärvi Published by Linköping University Electronic Press, 2010 ISBN: 978‐91‐7393‐270‐7 URL: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva‐60807 © The Authors Contents Foreword ...................................................................................... 5 Authors ........................................................................................ 7 Introduction: A Paradigmatic Shift? Mats Bladh & Mikael Syväjärvi ................................................................................. 9 Materials and Growth Technologies for Efficient LEDs Mikael Syväjärvi, Satoshi Kamiyama, Rositza Yakimova & Isamu Akasaki ............... 16 Light Excitation and Extraction in LEDs Satoshi Kamiyama, Motoaki Iwaya, Isamu Akasaki, Mikael Syväjärvi & Rositza Yakimova ...................................................................................................... 27 ‘No Blue’ White LED Haiyan Ou, Dennis Corell, Carsten Dam‐Hansen, Paul‐Michael Petersen & Dan Friis .................................................................................................................... 35 User Responses to Energy Efficient Light Sources in Home Environments Monica Säter ............................................................................................................. 43 Prospects for LED from a Historical Perspective Mats Bladh ...............................................................................................................
    [Show full text]
  • Commons House
    Commons House Community Features Mailboxes in the lobby (students still have CPO boxes) encourage unintentional bumps when residents pick up mail. Glass doors allow residents to look inside to see what's going on. Community room is for most meetings and programs - for meetings of the entire community, the Folk Center across the street has low rental fees and we felt we didn't need to duplicate a space of that size with a commercial kitchen. The "kid room" allows children to have their own area during meetings or when parents are doing laundry. Laundry room has washers for residents of original apartments and dryers for use by all residents. Newer apartments have washers but not dryers to make using dryers a choice not an automatic assumption. Examples of re-use Barn siding on outside is from an actual barn. Wood for ceilings came from a house. Carpet in kid room and office is from recycled fibers. Energy-saving features Air conditioning in office only - community room has cross-ventilation Compact fluorescent bulbs throughout Ceiling fans in meeting room and kid room Medite I1 cabinets made with formaldehyde-free particleboard Richlite countertops made with cellulose fiber and resin Solar light tube in meeting area Concrete floor for thermal mass Solar panel on south roof for radiant floor heating - to be used for heating hot water in summer Double-paned windows with low-e glazing Dual-flush toilet Front-loading washers use less water and electricity than top-loading washers Moisture-sensors in dryers can reduce drying time - no need to guess how long it will take clothes to dry Kid-friendly blinds without cords Low window in kid room so the littlest children can see out Gas stove provides cleaner, but still nonrenewable fuel) BEREA COLLEGE ECOVILLAGE Design Features Bathroom floor Forbo linoleum Forbo linoleum is made from linseed oils, pigments, pine rosin, and pine flour with a natural jute backmg.
    [Show full text]
  • Sunshine Range New Performances Uses
    Solar energy solutions SUNSHINE RANGE NEW PERFORMANCES USES LITTLE Up to Up to 3BRIGHTER HOURS12 WORK SUNSHINESOLAR LIGHT than kerosene of light 360° Head rotation A lamp to read, study, work or get around. RAN R T A Y PRODUCT SPECIFICATIONS W COOK Y E A R Brightness Bright: 30 lumens I Normal: 15 lumens Solar panel Monocrystalline, 65 x 65 mm, 0.4watts, 4.5V Battery 3.2V, 500mAh, LiFePo4, Charging time: 7 Hrs S TUDY INSTRUCTIONS FOR USE NORMAL BRIGHT G E T D AROUN x1 x2 BENEFITS C A M 12 15 6 30 P Cost Robust Portable Two intensity Quick to All-in-one HOURS Lumens HOURS Lumens , HIKE... effective and light levels charge solution: of light of light Integrated panel PERFORMANCES USES FAMILY Up to Up to 30 HOURS21 BRIGHTER W than kerosene ORK of light 360° SUNSHINESOLAR LANTERN Handle rotation + MOBILE PHONE CHARGER PRODUCT SPECIFICATIONS A multi-purpose lamp for the house, COOK also practical to get around and charge phones. Brightness Turbo: 300 lumens I Bright: 170 lumens I Normal: 50 lumens Solar panel Polycrystalline, 190 x 148 mm, 3watts, 5V + 3m cable Battery 3.7V, 4000mAh, Lithium ion, Charging time: 7 Hrs Charge in DC Jack RAN Charge out USB Port R T A Y W Accessories USB to micro USB and 3.5mm DC charging cable S TUDY Y E A R INSTRUCTIONS FOR USE G E T D AROUN 100% 75% 50% 25% NORMAL BRIGHT TURBO* C O M E 20 M AT BENEFITS min UNIC x1 x2 x3 click = 2 seconds Up to Cost Robust Portable Lighting + Quick to Adaptable 21 50 170 3 300 HOURS Lumens HOURS Lumens HOURS Lumens B effective mobile phone charge E of light of light of light T R charger OGETHE PERFORMANCES USES Up to Up to Up to 15,5 10 HOME BRIGHTER20 HOURS HOURS than kerosene of light of sound WORK PRODUCT SPECIFICATIONS SUNSHINESOLAR POWER KIT Light bulb - High: 100 lumens I Normal: 50 lumens Light tube - High: 200 lumens I Normal: 100 lumens Brightness + RADIO Torch - High: 200 lumens I Medium: 100 lumens Normal: 50 lumens CO A complete kit to light the home and extend the day.
    [Show full text]
  • Light and Ultraviolet Radiation
    Light and Ultraviolet Radiation Objectives page 3 Introduction page 3 Why worry about light and UV radiation? page 3 What materials are most sensitive to damage? page 4 Can the damage be prevented? page 5 Light sources in museums, galleries and libraries page 6 What lighting levels are acceptable? page 7 What do these levels mean? page 7 Measuring light and UV radiation page 9 MORE ABOUT LIGHT AND UV RADIATION Light and UV radiation are types of energy page 9 The electromagnetic spectrum page 10 How does the energy cause damage? page 11 Sources of light and UV radiation page 12 The brightness of light page 14 Additional information about the units used to measure light page 14 For further reading page 15 Self-evaluation quiz page 15 Answers to self-evaluation quiz page 17 Objectives Why worry about light and UV radiation? At the end of this chapter you should: • understand the adverse effects that visible Although we could not do without light in light and ultraviolet—UV—radiation can have museums, galleries and libraries, it is important to on museum objects; remember light is an environmental factor that contributes to the deterioration of our valued • be able to identify the items in your collections. collections that are most susceptible to damage caused by exposure to visible light It is vital to be aware that visible light is often and UV radiation; accompanied by: • know steps to take to control the lighting and UV radiation levels, and so minimise damage • UV radiation, which can cause more damage to your collections; faster than visible light; and • be aware of the sources of visible light, UV • infrared radiation, which heats materials.
    [Show full text]
  • Improvement of Thermal Efficiency Through Natural Lighting: Energy
    UIJRT | United International Journal for Research & Technology | Volume 01, Issue 05, 2020 | ISSN: 2582-6832 Improvement of Thermal Efficiency Through Natural Lighting: Energy Saving Dean Johancel Mbadinga1 and Halil Zafar Alibaba2 1,2Eastern Mediterranean University, Northern Cyprus [email protected], [email protected] Abstract — Roughly a third of Europe's energy caused by solar radiation in a building, the amount of consumption accounts for the housing market. This natural light is often insufficient and the energy used for usage, like that of other homes, mostly in the tertiary electrical lighting in- creases. Therefore, a well- sector, contributes for 40% of total energy consumption designed, controlled use of natural light, the use of and 36% of CO2 emissions. Artificial lighting accounts technologies or systems that ensure light penetration for 14% of the European Union's power use and 19% of throughout the building, energy consumption for the world's energy usage. By using well-designed lighting and air conditioning can be kept to a minimum. natural lighting, controlled when technology and Daylight harvesting is the term used for a control system systems which guarantee the usability of all areas inside that, when natural daylight is available, reduces the use buildings, it is possible to reduce the energy of artificial lighting with electrical lamps in building consumption of lighting or air conditioning. The essay interiors to reduce energy consumption. In open-loop or would address the development of technologies and closed-loop systems, all daylight harvesting systems use equipment for controlling natural light in buildings, a light level sensor, a photo sensor to detect the focusing on control methods that not only protect prevailing level of light, luminance or brightness.
    [Show full text]
  • Modifying the Design of Solar Tube to Produce Cost Effective Dispose of Sunlight in Multi-Storey Buildings
    INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH VOLUME 2, ISSUE 2, FEBRUARY 2013 ISSN 2277-8616 Modifying The Design Of Solar Tube To Produce Cost Effective Dispose Of Sunlight In Multi-Storey Buildings Vineet Kumar Singh, Amit Kumar Jain Abstract: - Since the population of world is increasing at a very faster rate, the demand for the basic necessities is also increasing. Such necessities include food, clothing, shelter etc, the main challenge the government is facing is the increasing demand for the power generation for the entire population which is necessary for any country to be called a developed nation. The demand for shelter is being met by the very rapid rate of colonization which if not properly controlled will definitely lead to reduction in net sown area, increased deforestation and various ecological problems. So the trend is to build the multi-storey buildings on a very small piece of land. It has been observed that the buildings in metropolitan city are very close to each other and sometimes they are not properly oriented to the sun. Again the present era construction is being carried out underground such as the ones used in colleges for constructing library, laboratory, and metro stations. So the interior of the building remains in darkness even in the daytime. Thus to create the illumination in the building during the day, a lot of energy (electrical) is wasted. So in this paper an attempt is being made to produce and implement a system that will replace the existing day lighting systems without incurring a huge sum of money.
    [Show full text]
  • Light Extraction Efficiency in Iii- Nitride Light-Emitting Diodes and Piezoelectric Properties in Zno Nanomaterials
    LIGHT EXTRACTION EFFICIENCY IN III- NITRIDE LIGHT-EMITTING DIODES AND PIEZOELECTRIC PROPERTIES IN ZNO NANOMATERIALS by JUNCHAO ZHOU Submitted in partial fulfillment of the requirements for the degree of Master of Science Department of Electrical Engineering and Computer Science CASE WESTERN RESERVE UNIVERSITY August, 2016 CASE WESTERN RESERVE UNIVERSITY SCHOOL OF GRADUATE STUDIES We hereby approve the thesis of Junchao Zhou candidate for the Master of Science degree*. Committee Chair Dr. Hongping Zhao Committee Member Dr. Christian A. Zorman Committee Member Dr. Philip Feng Committee Member Dr. Roger H. French Date of Defense May 31st. 2016 *We also certify that written approval has been obtained for any proprietary material contained therein. Acknowledgements I would like to express my sincere gratitude to my advisor Dr. Hongping Zhao, for her dedicated help on my Master’s study and related research, for her patience, motivation, and immense knowledge. Her guidance helped me throughout my research and writing of this thesis. Then, I would like to thank Dr. Zorman for his constructive advice for my thesis work as well as his help on my thesis project experiment. His insights helped me overcome the difficulties in my experiment. I would also like to thank Dr. French, Dr. Feng and Dr. Zorman for being on my thesis committee member and providing insightful comments. Also, I would like to thank Dr. Ming-chun Huang for the discussion on the applications of ZnO in piezoelectric devices. In addition, I would like to thank my group members for their advice on my research projects. I would like to thank Lu Han for her guidance on using the experimental equipment and Subrina Rafique for providing the materials for experiment.
    [Show full text]
  • Analysis of Light Tubes in Interior Daylighting System for Building
    Indonesian Journal of Electrical Engineering and Computer Science Vol. 17, No. 2, February 2020, pp. 710~719 ISSN: 2502-4752, DOI: 10.11591/ijeecs.v17.i2.pp710-719 710 Analysis of light tubes in interior daylighting system for building Badri Narayan Mohapatra1, M. Ravi Kumar2, Sushanta K. Mandal3 1Department of Electronics and Communication, CUTM, India 2Department Electronics and Communication Engineering, MNIT, India 3Department Electronics and Communication Engineering, Sharda University, India Article Info ABSTRACT Article history: Analysis of vertical light tubes, and diffuser as daylighting system in buildings is presented. The solar light energy is directly addressed to the Received Apr 15, 2019 chosen area of the building with a light tube and diffuser guiding structure. Revised Jun 16, 2019 This work highlights illuminance obtained by light tubes in a three storied Accepted Jun 30, 2019 office building. Field investigation with a scaled prototype and simulations with HOLIGILM, and DIALux are analyzed. It is observed that light tubes can offer large savings in electricity usage by using natural daylight. Keywords: Daylight Energy saving Illuminance Light design Optical tube Copyright © 2020 Institute of Advanced Engineering and Science. All rights reserved. Corresponding Author: Badri Narayan Mohapatra, Department of Electronics and Communication, CUTM, Paralakhemundi, 761211, India. Email: [email protected] 1. INTRODUCTION Light tube as a source is designed to direct light into deep areas within buildings where daylight cannot reach. The combined use of windows and light tubes can improve the daylighting within a room. By multi-reflection mechanism, light tubes transmit sunlight which is more uniform. Various advantages of daylighting for human health and comfort are described in [1-3].
    [Show full text]
  • Powerpluslight.3.Pdf
    INDEX POWLI010 HALOGEN FLOODlight 150W PAGE 2 HALOGENLIGHTS POWLI011 HALOGEN FLOODlight with SENSOR 150W PAGE 2 LIGHT UP YOUR LIFE WITH POWERPLUS POWLI013 PORTABLE HALOGEN FLOODlight 150W PAGE 2 POWLI020 HALOGEN FLOODlight 500W PAGE 3 POWLI021 HALOGEN FLOODlight with SENSOR 500W PAGE 3 POWLI023 PORTABLE HALOGEN FLOODlight 500W PAGE 3 POWLI025 HALOGEN FLOODlight with TRipOD 500W PAGE 3 POWLI300 RECHARGEABLE HALOGEN FLAshlight 55W PAGE 4 POWLI301 RECHARGEABLE HALOGEN FLAshlight 75W PAGE 4 POWLI310 RECHARGEABLE HALOGEN FLAshlight 75W PAGE 4-5 POWLI340 RECHARGEABLE HALOGEN FLAshlight 100W PAGE 4-5 POWLI700 HALOGEN BULB 150W PAGE 22 POWLI710 HALOGEN BULB 500W PAGE 22 POWLI720 HALOGEN BULB 1000W PAGE 22 POWLI113 PORTABLE ENERGY SAviNG FLOODlight 2x 27W PAGE 6 ENERGYS AVINGLIGHTS POWLI120 ENERGY SAviNG FLOODlight 32W PAGE 7 LIGHT UP YOUR LIFE WITH POWERPLUS POWLI121 ENERGY SAviNG FLOODlight with SENSOR 32W PAGE 7 POWLI123 PORTABLE ENERGY SAviNG FLOODlight 32W PAGE 7 POWLI730 ENERGY SAviNG BULB 27W PAGE 22 POWLI740 ENERGY SAviNG BULB 32W PAGE 22 POWLI7500 ENERGY SAviNG BULB 36W PAGE 22 POWLI200 LED FlOODlight 2W PAGE 8 LEDLIGHTS POWLI210 LED FLOODlight 3W PAGE 8 LIGHT UP YOUR LIFE WITH POWERPLUS POWLI211 LED FLOODlight with SENSOR 3W PAGE 8 POWLI213 PORTABLE LED FLOODlight 3W PAGE 8 POWLI220 LED FlOODlight 10W PAGE 9 POWLI221 LED FlOODlight with SENSOR 10W PAGE 9 POWLI230 LED FlOODlight 20W PAGE 10 POWLI231 LED FlOODlight with SENSOR 20W PAGE 10 POWLI233 PORTABLE LED FLOODlight 20W PAGE 10 POWLI234 PORTABLE LED FLOODlight 20W PAGE 11 POWLI236
    [Show full text]
  • Daylighting Analysis and Proposal for the CSAIL Lounge on the Second Floor of the Stata Center
    Daylighting Analysis and Proposal for the CSAIL Lounge on the Second Floor of the Stata Center Elizabeth Katcoff Terianne Hall Megan Arp December 12th, 2006 Introduction: Description of the Space The CSAIL lounge is located on the 2nd floor of the Stata Center in the center of the building. The space is used for both relaxing and working. However, we noticed that lighting in the space seems inadequate to perform work without straining the eyes. Therefore, we wanted to analyze the space to identify the problems with the current lighting situation, determine how the lighting could be improved, and propose a feasible lighting design to correct the current situation. Figure by MIT OpenCourseWare. Figure 1: Plan of the space with current skylight in blue box (North is up) The rectangular space measures approximately thirty by sixty feet, with a short side facing south. On three sides of the room, a balcony extends five feet into the space. In addition, a staircase comes down from the balcony, with offices surrounding the space. The offices, lit by artificial light, allow light to leak into the space through large glass windows. Figures 2a (left) and 2b (right): Pictures of the Space. Picture 2a depicts a workspace on the south end of the room that faces the offices. Picture 2b provides a broader view of the lounge space, highlighting key elements such as the staircase and the artificial fluorescent lights hanging from the ceiling. The only natural light in the space comes from a nine feet by nine feet skylight in the southeastern corner of the room.
    [Show full text]