FINISHING 1 POLYBOND VDI Gives Bulkiness and Fullness Without Stiffness 2 ACZASOFT Acrylic Base Softner for Cotton, Synthetic and Their Blends
Total Page:16
File Type:pdf, Size:1020Kb
PRODUCT LIST Be assured for quality Processing Range SR. PRODUCT APPLICATIONS NO. FINISHING 1 POLYBOND VDI Gives bulkiness and fullness without stiffness 2 ACZASOFT Acrylic base softner for Cotton, Synthetic and their blends. 3 POLY BOND - SNI Finishing agent for imparting high stiffness & body to net fabric. 4 SOFTEX : 100% Reactive softener DYEING & PRINTING 5 LASER – 99 Solvent base Stain Remover setting assistance for polyester Fabrics 6 LASER – SNP One step dyeing and scouring agent for jet WASHING, BLEACHING, MERCERISING, SCOURING ETC. 7 TEXPOTL-AD Anionic wetting Agent & detergent 8 TEXPOL-AWD Anionic wetting & rewetting agent & detergent 9 TEXPOL-NSD Nonionic wetting cum scouring agent 10 FEXCER CCL Fixer for Khadi and Pigment printing useful in achieving Excellent fastness. 11 MICRO AMINO Dispersible concentrated softner. SILICON EMULSION SPECIALTY CHEMICALS 12 IMROL SBI One step dyeing (all in on dyeing) 13 PRINTEX – C Strength improver with pH adjustment (all in one printing) 14 WHITE-ON-1000 Khadi Powder, Replacement of Titanium Dioxide 15 ALKALIDYE Soda Replacement 16 DESPROL VX – D Dis. Agent (Con.lig) 17 NEW – WASH VDI Washing off agent with protective collide, silicate 18 FIBROACID Eco prendly and alternative to acetic Acid. PAPER ADHESIVE 19 LOTUS - 231 Lamination Gum for Bopp & P.V.C. film 20 SUPERFIX – V For matt & P.V.C. Film 21 LOTUS - 131 Sticker Gum 22 LOTUS – 999 Pasting Gum for Box pasting. POLY BOND–VDI FOR MEDIUM SOFT FINISH ON FABRIC & CO-BINDER FOR KHADI PRINTING Poly Bond-VDI is a highly plasticized homopolymer of vinyl acetate in the form of milky white flowable viscous emulsion. It is tailored for finishing of textiles. It imparts high body with medium soft feel and dimensional stability to synthetic, blended & cotton textiles. Poly Bond-VDI is also recommended as Co-binder for Khadi & Foam Printing. It’s high plastisiser content & uniform particle size distribution help to get an extra coverage, proper get up & continuity of prints as required in Khadi & Foam printing. Poly Bond-VDI can also be used as binder for carpet back coating along with natural latex. TYPICAL PROPERTIES Appearance Milky White Viscous Free Flowing Emulsion Solid , % (at 105° C for 3hrs) 5 ± 1 Viscosity, Poise (RVT #7/20/30°C) 25 -575 pH (at 25 ° C) 4.5 – 5.5 Film clarity (100 micron film on glass plate) Clear, grit free, medium soft film Free Monomer % (Max) 0.3 Shelf life 6 months Packing Packed in 50 / 235 Kg HDPE Wide mouth carbouys / drums. HEALTH AND SAFETY 1) It is nonflammable, nontoxic and non-hazardous normal conditions of use. 2) Splashes in the eyes and on the skin should be immediately washed with plenty of water to avoid irritation and discomfort. 3) Prolonged skin contact be avoided. Protective gloves and barrier creams are advisable for anyone handling resin products regularly. 4) Proper ventilation should be provided in the work area as with all synthetic resins. It contain traces of residual monomer and organic substances. Smoking should be discouraged in the work area. 5) Spillage on clothing and in the work areas be immediately washed with water. APPLICATION DETAILS Poly Bond-VDI imparts a medium soft finish & high body along with dimensional stability on 100% cotton, 100% polyester & blended fabrics. Poly Bond-VDI can be applied along with almost all kinds of softeners, DMDHEU resins, catalyst, starch & other finishing ingredients to give a suitable stiff finish to all kinds of fabric. An indicative finishing recipe containing Poly Bond-VDI for the finishing of polyester-cotton blended dress materials to impart a medium finish will be as follows: Poly Bond-VDI 20 – 70 gpl Silicon Emulsion (10%) 15 – 20 gpl Cationic Softener (18%) 20 – 30 gpl Reactive Softener 20 – 40 gpl PE Emulsion (20%) 10 – 20 gpl Acetic Acid for pH adjustment to a 4 – 5 pH. Dosage of Poly Bond-VDI in the above recipe will depend on the finisher’s requirements. Poly Bond-VDI is the most popular Co-blinder for Khadi & Foam Printing, available in the market. Poly Bond-VDI is recommended at a dosage level of 2 – 5 % in Khadi printing paste for better print coverage in case of printing by Flat Bed & Rotary Printing machine. However in case of printing by Hand Screen process 5-10 % Poly Bond-VDI is recommended in Khadi as well as in Foam printing paste for its smooth flow through the screen during printing. Stretchable Khadi printing on hosiery using Poly Bond-VDI is done as per the following recipe. Vamulsion TPI 2139 100 parts (Soft Binder) TiO2 (Anatase grade) 100 parts (Titanium di-oxide powder) Poly Bond-VDI 150 parts Vamulsion Tex 355 50 parts (SBR Rubber Latex, Soft variety) Pigment Colour Dispersion As required (Nil ,in case of getting white print) Here printing is done by hand screen & to get thicker layer 4 – 8 strokes are given, while drying the printed cloth by a hand drier after every two strokes. Disclaimer : Since the conditions of use working methods adopted by the buyers are beyond our control, it is recommended that users satisfy themselves to the actual performance of the product under their respective application condition. This supersedes all previous technical literature on this product by Shrinath Poly- Chem. ACZA SOFT Acza Soft is synthetic product for smooth and firm handle, slip resistance finish for all kind of textile fabrics. SPECIFICATION: 1) Appearance : White viscous liquid. 2) Chemical Nature : Polymer Derivative. 3) Lonic Nature : Nonionic. 4) PH : 6.5 to 7.5 5) Solubility : It is easily soluble in cold water at all concentrations. 6) Stability : It is stable to high concentrations of acid, alkalies and Metal ions and catalyst. 7) Compability : It is compatible with starch glue, gum, casein, Resins, Polyvinly Acetate (PVA) Emulsion) Emulsions, all types of softners and other all types of Auxiliaries. PROPERTIES: Acza soft Imparts soft lustrous silky effects on fabrics. It also improves the texture and body of fabrics. It is effective on all types of fabrics – natural and synthetics, when used along with other thermosetting resins, remarkable durable finish is obtained which is resistant to repeated washing. Acza soft when used along with wash and wear finished helps to get excellent control by helping to get balance finishers and smoothness. Acza soft does not develop rancidity or discolouration on standing. Its treatment on fabrics also does not develop odour or discolouration. APPLICATION: Acza soft gives full, firm and smooth finish to all kind of fabrics. Acza soft has advantage over starch or glue which are not fast to washing and the finish is removed in the first washing it self. It has also got better advantage over polyvinly Acetate Emulsions which imports a very harsh feel and higher amounts of softness have to be used to over come this effect, Acza soft is readdily soluble in water and it is applied in the form of aqueous solution on which. Jigger or pad. Then goods are entered direct in to the finishing bath dries and cured. Some of the typical applications are listed below for the use of Acza soft for various type of fabrics. 1) For finish Nylon Fabrics. Polyestar Sarees, Taffetta and other dress materials, Acza soft : 10 to 12 gpl Cationic softner : 18 to 20 gpl Silicon emulsion / : 18 to 20 gpl Polyetholen Emulation Pad dry only. Tex by Tex Shirting 40 to 45 Acza soft 18 to 20 gpl P. E. (Polyethylen Emulsion) 5 to 7 gpl Arafil Nylon Shirting 30 to 35 gpl Acza soft 20 to 25 gpl P. E. (Polyethylen Emulsion) 4 to 6 gpl P.V.A. Emulsion Chefon Shree 50 to 55 gpl Acza soft 20 to 22 gpl P. E. (Polyethylen Emulsion) 30 to 32 gpl P.V.A. Emulsion 18 to 20 gpl K.V.S. Spun by Spun Saree 60 to 65 gpl Acza soft 20 to 22 gpl P. E. (Polyethylen Emulsion) 40 to 42 gpl P.V.A. Emulsion 2) For Soft Finish : Acza Soft : 6 to 8 gpl Urea Formaldeycle : 30 to 40 gpl Type Resin Polyethylene Emulsion : 20 to 25 gpl Nonionic Softner : 20 to 25 gpl Ammounium chloride : 10 to 12 gpl 3) For Stiff finish collars, cuff materials : Acza Soft : 50 to 60 gpl Urea Formaldeyde : 150 to 200 gpl Melamine formal Deyde Amonium Chloride : 15 to 18 gpl Thus in the finishing of textile fabrics to get the desired finish very much depends upon the proper choice of the most suitable finishing agent. This is particularly true when the finisher has to produce a finish which is full firm and also soft that too with a body to the fabrics. The Acza soft is the best aid to the today’s finishing problems. The information given here is in the best of our knowledge an experience and given here as a guide lines only. However, no guaranty is given for the same. POLY BOND - SNI FINISHING AGENT FOR IMPARTING HIGH STIFFNESS & BODY TO NET FABRIC Poly Bond SNI is a polymeric textile stiffener offered in the form of milky white flowable viscous aqueous emulsion. It is specially designed to impart high stiffness and body. Feel and dimensional stability to net type & very lightly constructed made of polyester, nylon & cotton fibres. Poly Bond SNI is also recommended for replacing starch in the finishing of polyester & nylon curtain nets, net Sari, P/C & P/V Dhoti as well as cotton & synthetic mosquito nets & lace. TYPICAL PROPERTIES Appearance Milky White Viscous Free Flowing Emulsion Solid, % (at 105˚ C for 3hrs) 23+ 1 Viscosity, Poise (RVT # 7/20/30˚C) 150 - 300 pH (at 25˚C) 6.0 - 8.0 Film properties Slightly hazy to clear Free Monomer % (Max) 0.3 Shelf life 6 months Packing Packed in 50 and 235 Kg HDPE Carbouys / drums.