Sales Tax Summary

Total Page:16

File Type:pdf, Size:1020Kb

Sales Tax Summary SURVEY OF SALES AND USE TAXES IMPOSED ON, AND EXEMPTIONS FROM SALES AND USE TAXES FOR, CONTAINERS, PALLETS AND OTHER PACKAGING AND SHIPPING MATERIALS © 2004, 2006 Reusable Pallet and Container Coalition, Inc. All rights reserved. No part of this publication may be reproduced or redistributed in any form or by any electronic or mechanical means without the written permission of the Reusable Pallet and Container Coalition, Inc. TABLE OF CONTENTS SECTION I………………………………………………………….……....Page 3 Taxability of Sales, Leases, and Use of Pallets and Containers, with Notes regarding Exemptions. State by State Table with links to Statutes and Administrative Codes. SECTION II ……………………………………………………………….Page 14 State Exemptions from Sales and Use Tax for Containers, Pallets, and Other Packaging and Shipping Materials. Extensive Survey of State Statutes and Administrative Codes SECTION III ……………………………………………………..………Page 184 State Departments of Tax and Revenue. Tabular Listing of Names, Addresses, and Telephone Numbers for Chief Administrators of State Departments of Tax and Revenue. 2 SECTION I. SUMMARY OF SALES AND USE TAXES ON CONTAINERS, PALLETS AND OTHER PACKAGING AND SHIPPING MATERIALS (INCLUDING REUSABLE PALLETS AND CONTAINERS) A. Introduction Most states in the United States impose a sales tax on sales of tangible personal property to a final user or consumer of the property. The transaction is referred to by various terms, such as “retail sale” or “sale at retail,” and in most jurisdictions, it includes leases, rentals and other transfers of custody or possession in exchange for valuable consideration. Most state statutes contain a provision that declares a presumption that such transactions involving the sale, lease or rental of tangible personal property are taxable. However, consistent with the intent to impose the tax on sales to a final user or consumer, every state statute contains exclusions or exemptions for many types of intermediate transactions in which the tangible personal property is not passed to the final user or consumer. Examples of such exclusions and exemptions include the following: 1. Sales for resale; 2. Sales of components or ingredients of property produced for sale; 3. Sales of property consumed in manufacture or production of articles for sale; 4. Sales of manufacturing machinery or equipment; and 5. Sales of containers and packaging. Although the statutes, regulations and administrative pronouncements by state taxing authorities attempt to set out the scope of the various exemptions, it can often be difficult to determine when one transaction is taxable and another similar transaction is exempt. Indeed, many intermediate business transactions are subject to the sales tax. 3 In addition, there are many exclusions and exemptions which apply to an otherwise taxable transaction simply because of who the purchaser is. For example, charitable organizations are almost universally treated to an exemption from the sales tax. Likewise, farmers and other agricultural producers may purchase or lease tangible personal property exempt from tax, when a non-agricultural business purchasing or leasing the same items would be subject to the sales tax. And the statutory and administrative exclusions and exemptions will often be applied depending upon the particular use to which the purchaser or lessee intends to put the articles purchased or leased. Finally, the statutes and regulations often contain exclusions and exemptions that have no basis in sound tax theory, but exist simply because the legislature or tax commissioner has made a decision the carve out an exclusion or exemption for a particular type of transaction, purchaser classification, or use of the tangible personal property being purchased. B. Taxation and Exemptions for Containers, Pallets and other “Packaging Materials” The question of the taxability of one particular type of tangible personal property, over the years, has been so vexing that many state legislatures have written specific statutory provisions to deal with it: what are generally referred to as “containers” and “packaging materials.” The problem has been that containers and packaging materials are generally purchased or leased for the purpose of holding, containing, shipping, transporting, or delivering other property that is really the subject of the transaction. And frequently, the seller does not impose any charge or fee for the container or packaging separate and apart from the contents themselves. The sale, lease or rental of containers or packaging materials can be viewed theoretically in more than one way: (a) as a sale for resale to the final user or consumer, or (b) as a sale to a vendor for use and consumption of the container or packaging in preparing its product for sale. Because neither of these exemptions affords consistent results in the administration of the sales tax, many state legislatures have adopted special exemptions dealing with the different kinds of containers and packaging materials. Many of these statutes, or the regulations and administrative pronouncements issued in interpreting the statutes, distinguish between “nonreturnable” and 4 “returnable” containers and packaging. The purpose for drawing this distinction appears to be to exempt from sales and use tax those containers and packaging materials that will accompany the goods and products sold in the containers to a final consumer (who then disposes of the packaging), and to tax containers and packaging that are to be returned to a seller, packager, shipper or other person who can reuse the container for shipment, transportation or delivery of future goods and products. Table No. 1, which is set forth below, provides in summary form information on the taxability or exemptions of “disposable packaging,” “reusable pallets,” and “reusable containers.” Below is a brief key to the contents of each of the columns of the Table: Column 1: This column sets forth the states that impose a sales or use tax on transactions in tangible personal property. At present, Alaska, Montana, New Hampshire, and Oregon do not levy a sales or use tax on containers, pallets and other similar articles. Column 2: The statutory citation to the state sales tax law is set forth in this column (also referred to as “gross receipts tax,” “excise tax,” et al.). It should be noted that most states also impose a use tax, which usually is set forth in a separate title or chapter of the statute. Delaware does not impose a sales tax, but does impose a use tax on leases of tangible personal property. Column 3: Exemptions for “disposable packaging.” Most states permit exemptions for disposable packaging as “nonreturnable” packaging materials. Column 4: Exemptions for “reusable pallets.” Please note that a “yes” in this column does not mean that all reusable pallets are exempt from taxation; often, states have limited this exemption to a particular type of user such as farmers (e.g., New Jersey), or to particular types of use such as produce or meat shipments (e.g., Wisconsin). Where there is an asterisk (*), it indicates the exemption is usually limited to a particular user or use, rather 5 than to “reusable pallets” generally. Where there a question mark (?), this indicates that the issue whether there is an exemption or not is not clear cut, and further research or inquiry should be undertaken. Column 5: Exemptions for “reusable containers.” Please note that a “yes” in this column does not mean that all reusable containers are exempt from taxation; often, states have limited this exemption to a particular type of user such as farmers (e.g., New Jersey), or to particular types of use such as produce or meat shipments (e.g., Wisconsin). Where there is an asterisk (*), it indicates the exemption is usually limited to a particular user or use, rather than to “reusable containers” generally. Where there a question mark (?), this indicates that the issue whether there is an exemption or not is not clear cut, and further research or inquiry should be undertaken. Column 6: This column gives a brief glimpse into which types of containers, pallets, or other packaging materials the particular state exempts, if any. The pertinent provisions of the state’s statute and administrative regulations and rulings are set forth at greater length in SECTION II. 6 TABLE NO. 1 TAXABILITY OF SALES, LEASES AND USE OF PALLETS AND CONTAINERS, WITH NOTES REGARDING EXEMPTIONS STATE SALES TAX LAW DP* RP* RC* NOTES Alabama Michie’s Alabama Yes Yes? Yes? Nonreturnable containers and pallets are exempt; Code §40-23-1, et seq. returnable containers and pallets used to ship poultry products may be exempt Alaska No statewide sales and N/a N/a N/a City or borough sales tax may apply use tax Arizona Arizona Revised Yes No No Exempts sale of container as sale for resale if Statutes Annotated buyer is to transfer it with contents in future sale; §42-5001, et seq. if container is not subsequently sold, sale is taxable Arkansas Arkansas Code of 1987 Yes No No? Nonreturnable pallets delivered with final product Annotated §26-52-101, are exempt; returnable pallets are taxable et seq. Materials used by manufacturer or processor to transport product and which are returned or do not become part of finished product are taxable California California Revenue and Yes Yes Yes Exempt: Taxation Code 1. Nonreturnable containers when sold or leased Annotated §6001, et without contents then sold with contents to end seq. user 2. Containers when sold with nontaxable contents 3. Returnable containers when sold with contents in retail sale or when resold for refilling 4. Containers, when sold or leased without contents to persons who put food products in container for shipment for resale. Colorado Colorado Revised Yes Yes Yes Containers exempt if used to contain Statutes Annotated §39- manufactured or compounded product. 26-101, et seq. Pallets and containers exempt if used as “farm equipment” by agricultural producer. Connecticut Connecticut General Yes? Yes Yes? Exempt: Statutes Annotated §12- 1. Nonreturnable containers (and returnable dairy 401, et seq.
Recommended publications
  • General Technical Characteristics
    General Technical Characteristics For more specific informations about the product or the company please visit www.kegsolutions.it or get in touch directly with Keg Solutions at the contact details below. For coloured kegs like amber or other colours refer to the list below. General dimensions @ 23°c 1.0 bar KS KS 20 KS 20+ KS 24 KS 24+ Height (mm) 610 610 610 610 Diameter (mm) 250 250 270 270 Empty volume 1atm (L) 20 20 24 24 Total weight empty keg (Kg) 1,3 1,4 1,4 1,4 Overall Composition The KS keg is an innovative disposable container, made mainly by plastic External Handle/pedestal: PP** material, for drinks on tap. it’s suitable for beverages such as beer, wine, coffee Locking ring: PP** and other liquids. Bottle: PET Central valve: POM* The KS kegs are perfect for non, low or medium carbonized beverages, for high Other valve elements: POM* carbonized beverages (like high carbonized beers, Champagnes etc.) need to be Thin cane: LDPE* checked on demand. Beers that carbonize into the kegs can’t exceed 3 bar (43,5 Tube: LDPE* psi) of pressure in the process, for security issues. Bag Tap: LDPE* The keg is usable only once and must be disposed in separated waste collection, Bag: Multifilm PA PE* except for the internal springs that need to be collected in the undifferentiated Springs: INOX AISI 316* garbage. Black seal: NBR FDA White seal: silicone* The bag inside the keg allows a significant increase of the shelf life of the beverages, absorbing the oxygen and preventing the liquid from the thrust gas.
    [Show full text]
  • Private Cuvée Keg Guide
    NEW! PRIVATE CUVÉ E KEG GUIDE Zardetto is thrilled to announce a brand new Private Cuvée keg oering to our line-up of unparalleled sparkling wines! Enjoy this true-to-style Veneto Frizzante, now on-tap for eortless pouring, an extended shelf-life, and consistently crisp bubbles. Before filling each keg, clean and sanitize all parts. Connect product tube to product filling connection (5)- ensure secure connection. Purge product through tube to ensure no air is left in the tube using product filling valve (6). If additional back-pressure is required (this will reduce foam build-up during filling) connect suitable gas supply to back-pressure top-up connection (1). Note: for Polykegs® without liner this should be CO2 or Nitrogen (max. 3.5 bar). Adjust back-pressure regulator (4) to maximum setting. Place Polykeg® to be filled on a stable level surface. Fit coupling head to Polykeg® valve. Note: spray a suitable sanitizer solution onto both parts before connection. Close coupler handle (7). Note: Back-pressure gauge (3) will now display the internal Polykeg® pressure. If additional back-pressure is required. Carefully open back pressure top up valve (2) until required pressure is achieved and close the valve. Note: It is vital to have the correct back-pressure when filling Polykegs® fitted with a liner. Carefully open product filling valve (6) - the Polykeg® will now start to fill. Note: It may be necessary to adjust the filling rate using this valve. As the Polykeg® fills, the back- pressure will rise, carefully adjust the backpressure regulator to maintain the desired back-pressure.
    [Show full text]
  • The Keg. Made in Germany Finn Keg
    FINN KEG The versatile keg BLEFA – THE KEG. MADE IN GERMANY FINN KEG The characteristic top and bottom chimbs are made of high-density polyethylene. This guarantees careful handling during the transport and behind the bar. The chimbs are machined to provide a keg that is easily stackable with a high degree of stability. VARIATIONS AREAS OF APPLICATION DIN, EURO, Beer, Wine, Soft Drinks, Cider, SLIM Kegs Mixed Drinks FINN KEG INDIVIDUAL DECORATION Ø 322 Coloured top and bottom chimbs Hot foil printing of your brand name in the top and/or bottom chimb High-quality silk screen printing of your brand name or logo on the keg body (one or two-coloured) H1 Stickers / Labelling Electrochemical etching FEATURES Top and bottom chimbs are made of HDPE (High Density Polyethylene) Exchangeable top and bottom chimbs Geometry of chimbs can be adapted individually Laser etching of 2D Matrix code or QR code as an alternative BLEFA KEGS — MADE IN GERMANY Highest quality: ISO certified 9001:2008 Hygiene: Utilization of high-quality stainless steel for all components that come in contact with contents (Standard 1.4301 / AISI 304; Special 1.4571 / AISI 316) Focus on safety: All kegs are equipped with a safety burst disc TYPE CAPACITY (L/GAL) Ø D (MM/IN) H1 (MM/IN) WEIGHT (KG/LB) STACKABLE HOTFOIL PRINT SILK SCREEN ETCHING LASER 2-D BARCODE AND NO. FINN Keg F30D 30 / 7.93 363 / 14.29 400 / 15.75 8.6 / 18.96 ■ ■ ■ ■ ■ FINN Keg F50D 50 / 13.2 363 / 14.29 600 / 23.62 10.7 / 23.59 ■ ■ ■ ■ ■ FINN Keg F15M 15 / 3.96 303 / 11.92 334 / 13.15 6.0 / 13.23 ■ ■ ■ ■ ■ FINN
    [Show full text]
  • Homebrewer's Guide to Kegging a Moremanual ™ 1-800-600-0033
    Homebrewer's Guide to Kegging A MoreManual ™ www.MoreBeer.com 1-800-600-0033 This is a simple guide to properly and effectively cleaning, san- • Replacement Body Connects (KEG460/KEG470) itizing, filling, carbonating and serving homebrew beer using • Co2 Tee (D1860) Corny kegs. • Manifold (D1800/D1805/D1810/D1815/D1820) The advantages to kegging are many, but they can be summa- • Secondary Regulator (D1067A/B/C/D) rized in a few key points: Kegged beer is ready to drink faster than bottled beer because you will be using a Co2 tank to • Diffusion Stone – .5 Micron (KEG594) carbonate! You can also carbonate to any level you want – no Anatomy Of A Keg more guess work that may come with natural carbonation! In The Cornelius, or Corny, keg is made from stainless steel and designed addition, there will be no more sanitizing, filling and capping to hold up to 60 PSI (pounds per square inch) of pressure. The most dozens of bottles! common Corny kegs are made to hold 5 gallons of liquid, however, they can vary in size. A Corny keg is made up of the following: Equipment and Supplies 5 gallon Corny Keg Standard Corny Keg Lid Gas-In Body Connect (KEG420) (KEG440A) (KEG460N) A typical draft set-up (KEG400) Common Equipment: Poppet for Corny Keg Gas-In Dip Tube The 5 different O-Rings on a Keg • Cornelius or “Corny” style keg (KEG418/KEG420) (KEG540) (KEG480) (KEG500-) • 5 ft – 3/16" Inner Diameter (I.D.) Beverage Line (D1704) • 3 ft – 5/16" Inner Diameter (I.D.) Gas Line (D1700) The Shell — This is the body of the keg that holds the liquid and • Gas-In (Gray) Quick Disconnect (KEG700) is made of stainless steel.
    [Show full text]
  • 121712 Monthly Imports Oct Roll.Pdf
    Report : Monthly Imports of Beer, Wine, and Liquor Report Id : RRVAR751 Filename : \\nvproddb02\TASReports\rrvar751.12.17.2012.14.6.52.1513793.ps.pdf Run by : prdbat1 Report Date : 12/17/2012 Module Number: RRVAR751 Nevada Department of Taxation Page: 1 Monthly Imports of Beer, Wine, and Liquor Print Date: 12/17/2012 Roll Periods: 10/31/2012 THROUGH 10/31/2012 Gallons Reported on Return Period Total Malt Beverages Beverages Beverages Beverages Net Tax Net Tax TID Entity Name End Date Net Gallons Keg Case Up to 14% Up to 22% Over 22% Due Paid 1006547746-001 1 800 WINE SHOPCOM INC 10/31/2012 132.00 0.00 0.00 132.00 0.00 0.00 91.94 92.17 1006638431-001 13 APPELLATIONS LLC 10/31/2012 1.19 0.00 0.00 0.00 1.19 0.00 1.54 1.54 1006641998-001 A TO Z, REX HILL, FRANCIS TANNAHILL, WM HATC10/31/2012 7.53 0.00 0.00 4.95 2.58 0.00 6.79 6.80 1002857341-001 ABACELA VINEYARDS AND WINERY INC 10/31/2012 2.38 0.00 0.00 1.59 0.79 0.00 2.13 2.13 1006521305-001 ABEJA 10/31/2012 1.20 0.00 0.00 0.60 0.60 0.00 1.19 1.20 1009484516-001 ABERNATHY HOFFMAN LLC 10/31/2012 0.99 0.00 0.00 0.79 0.20 0.00 0.81 0.81 1006583173-001 ACACIA 10/31/2012 6.74 0.00 0.00 4.36 2.38 0.00 6.11 6.12 1008138380-001 ACCIDENTAL WINE CO THE 10/31/2012 2.97 0.00 0.00 0.00 2.97 0.00 3.84 3.85 1014301777-001 ACCOLADE WINES NORTH AMERICA INC 10/31/2012 1.98 0.00 0.00 1.39 0.59 0.00 1.73 1.74 1009684647-001 ACME FINE WINES LLC 10/31/2012 4.60 0.00 0.00 0.00 4.60 0.00 5.95 4.48 1006630856-001 ACORN WINERY 10/31/2012 3.96 0.00 0.00 2.77 1.19 0.00 3.47 3.48 1012869385-001 ADAMS BENCH 10/31/2012
    [Show full text]
  • PERFORMANCE GUIDELINES for REFILLABLE KEGS March 19, 2014
    Revision 0 March 19, 2014 PERFORMANCE GUIDELINES for REFILLABLE KEGS March 19, 2014 Table of Contents 1. Introduction ........................................................................................................................................... 3 2. Key Findings ........................................................................................................................................... 4 3. Purpose .................................................................................................................................................. 5 4. Purchasing or Procurement ................................................................................................................... 5 5. Performance .......................................................................................................................................... 6 5.1 Performance on Failure ................................................................................................................... 6 5.2 Dimensional Requirements and Functionality ................................................................................. 6 5.3 Physical Characteristics ................................................................................................................. 10 5.4 Fitness and Function Testing ......................................................................................................... 10 6. Regulatory and Safety .........................................................................................................................
    [Show full text]
  • How to Make Hard Cider
    HOW TO MAKE HARD CIDER INSTRUCTIONS Make a Starter The day before you brew your cider, make a starter. To make a starter, open a h a lf- ga llon bottle of room -temperature apple juice and pour out a few ounces. Pour the contents of one yeast packet into the bottle, reseal it and shake for a few seconds. Within five or six hours, you should see a bit of bubbling within the bottle. Once you do, release the pressure within the bottle, reseal it and put it in the refrigerator overn igh t. Get it out a couple of hours before you sta rt the next morning. Fermentation Stage (15 da ys ) 1. Sa n itize all equipment, using Professional Brewer’s Wash 2. Pou r the starter with yeast into the sanitized fermentation bucket and a dd th e remaining cider (~ 5 gallons). Stir the mixture with spoon to aerate 3. For a 6 gallon batch, add 3 tsp yeast n u trien ts (½ tsp per gallon) and 1½ tsp pectic en zym e (¼ tsp per gallon). 4. Seal the lid and affix the airlock & fill airlock w/ water 5. Place the bucket in a room or closet where the temperature is 65 to 75 degrees Let it Ferment. Within a day or two you should see the airlock start to bubble. Th is bubbling should subside (interval between bubbles exceeds 2 minutes) within two weeks, signifying an end to the primary fermentation. It is now time to transfer (known as rack or racking) the cider to a secondary fermentation vessel, typically a 5 gallon glass carboy where it will sit for 3 -4 weeks to clarify & age.
    [Show full text]
  • PIP COVER 16/12/2019 09:34 Page 1
    PIP 01-20 COVER.qxp_PIP COVER 16/12/2019 09:34 Page 1 Issue 219: January 2020 SECOND SKIN Why vacuum skin packaging could be the shape of things to come IN THIS ISSUE: PPlasticlastic ssuurgery BBlowlow mouldingmoulding TThehe futurefuture ooff dosingdosing Recycled polypropylene wwwwww.plasticsinpackaging.com PIP 01-20 combine.qxp_PIP 17/12/2019 11:05 Page 32 PET KEGS Circling back A community crusade could be key to the future credentials of one supporter of single-use plastics. Jane Douglas-Jonesexplains neCircle believes in single-use plastics. Meanwhile, KeyKegs also feature a Bag In Formerly known as Lightweight Con- Ball design – a laminated bag inside the PET Otainers, this family business based in container. This serves to safeguard product the Netherlands produces a range of disposable quality and shelf life and offers protection PET kegs, called KeyKegs, for beverages from exposure to oxygen. Beer, for example, including beer, wine, kombucha and coffee. will stay fresh in a KeyKeg for as long as it Wait a minute… aren’t we all supposed to would in a steel keg. After tapping, the beer is hate single-use plastics? Well, when you get fresh for three-to-four weeks, on average. down to it, of course, the problem has less to In addition, OneCircle also offers UniKeg do with the plastics themselves and more to products. As well as the double wall technology, Annemieke Hartman: “KeyKeg is the only keg that was do with the disposal of plastics waste. If col- these kegs have a spear and conventional fit- designed with circularity in mind from the very beginning” lected, recycled and reused, plastics are tings.
    [Show full text]
  • Draft-101-Booklet.Pdf
    1 2 Getting Started ............................................................................................. 1 Gas Cylinders ................................................................................................ 2 Gas Regulators .............................................................................................. 3 Commercial Sanke Couplers ......................................................................... 4 Ball-Lock ....................................................................................................... 5 Tubes and Clamps ......................................................................................... 6 Shanks .......................................................................................................... 7 Faucets ......................................................................................................... 8 Setup ............................................................................................................ 9 Pouring Beer ................................................................................................. 9 Troubleshooting ......................................................................................... 10 Recalibration .............................................................................................. 12 Keeping it Clean ......................................................................................... 12 CO₂ can be dangerous. It is an asphyxiating gas stored in a high- pressure cylinder. Make sure to always
    [Show full text]
  • Brew Keg Drink Enjoy
    13 HAMMETT ST. … PH 47281261 BREW KEG DRINK ENJOY A START TO FINISH DETAILING OF WHAT YOU NEED TO KNOW TO PUT YOUR BEER ON TAP, FROM THE TEAM THAT HAS BEEN SUPPLYING KEG SYSTEMS IN TOWNSVILLE SINCE 1993 Homebrew on Tap – Real Beer The following has been produced by ‘Water Filters and Brew’ to assist brewers in dispensing beer, and maintenance and cleaning of equipment. Filling Your Keg To begin with we will make some assumptions:- That you have had a beer fermenting and it has been left some extra time to clear. If you have the cold space in a fridge, you may have let the fermenter clear there. It is important to note that if you do an SG test that you clean the tap immediately, as bacteria will build up very quickly on beer droplets that are left in the tap. That you have a keg that has been properly cleaned with YOUNGA`S FERMENTER KEG AND LINE CLEANER or a suitable alternative. That you have cleaned the transfer tube. This tube is usually a metre long and 12m.m. in diameter and is used to transfer beer from fermenter to keg. That you have removed the airlock. If you can tick all these boxes, proceed with the following: 1. Clean your hands 2. Clean the tap 3. Open the tap and let the beer run into a container until your beer runs clear. This should be no more than half a litre. 4. Put the transfer tube on the tap and down into the open keg with the tube deep in the keg, usually on the bottom.
    [Show full text]
  • Carlsberg™ and Kegspertise Keg Case Study
    CASE STUDY Carlsberg™ and Kegspertise Keg Case Study United Kingdom Carlsberg™ UK and Kegspertise Optimise Keg & Cask Lifecycle with RFID. UHF Technology from HID Global Keeps Keg Fleet Flowing for Carlsberg. A wholly owned subsidiary of the world’s fourth largest brewer, Carlsberg UK brews over 1 billion pints of beer annually. Driven by “Thirst for Great” – a shared passion to continuously raise the bar and do better – Carlsberg believes that, in addition to quality products, a winning route to market is about understanding profit drivers by channel and geography, and integrating this insight into business planning. This is why Carlsberg is the only national brewer in the UK with its own distri- “We tried and tested many bution network, transporting kegged and bottled beverages from two main breweries in Northampton and Leeds to 16 distribution sites serving 15,000 pub, tags from many companies; restaurant and retail customers across England, Scotland and Wales. The appropriately-named Kegspertise Keg & Cask Optimisation assists Carlsberg UK in paving their winning route to market. Kegspertise tracking and reporting solutions aim to HID Global Keg Tag proved optimize beverage container and fleet management for the brewing industry, stout where other tags enhancing the bottom line for brewers and those in the brewing supply chain. HID Global is a worldwide leader in UHF RFID technology, which is emerging fizzled out.” as the most efficient and effective solution for tagging and tracking kegs and casks. By tapping HID products, solutions and expertise, Kegspertise is helping Andy Dorr redefine the potential of container management for Carlsberg. Managing Director and Founder Kegspertise Challenges Kegs and casks have been essential to the brewing industry for as long as long as ale has been produced.
    [Show full text]
  • Keg Injector System
    help dissolve the C02 out of the headspace and into the liquid (the cartridge injector KEG INJECTOR only fits the IN side of the keg). For best results, wait 20 minutes between each cartridge (or longer) to make sure all the SYSTEM C02 from the previous cartridge has been dissolved into the cold liquid before inject- ing another. Between injections, leave the S30 Packing List cartridge injector off the keg (disconnect Please make sure you have the items listed it), as it is not designed to withstand steady below before proceeding with assembly. carbonation pressures. 1 R13 2½ Gallon Keg 6. Cleaning 1 D37 Cartridge Injector 1 D21 Picnic Faucet Tap with hose The keg and tap should be cleaned between brews. To clean a keg rinse well with water, 1 D52 Keg Lube and then rinse with an iodophor sanitiz- 5 D63 16 Gram C02 Cartridges ing solution (follow the directions on the bottle). NEVER use bleach as a sanitizer, as 1. Priming the Beer it will corrode stainless steel. After rinsing To carbonate keg beer naturally, add 1½ oz. with sanitizer, rinse briefly with water to of corn sugar for beer in a 2½ gallon keg remove traces before storing kegs. Store (remember, keg beer has a lower carbon- kegs with the lids ajar to permit drying. ation level than bottled beer). After priming The keg tap can be cleaned by putting it and kegging, allow the beer to sit for 6 days on the keg, and adding a gallon of sanitiz- at room temperature to allow carbonation ing solution to the cleaned keg.
    [Show full text]