• Abstract and Figures
• Public Full-text

Illuminating 12 Overview of products and applications 372 Working light SYSLITE UNI 373 Working light SYSLITE KAL II 374 Working light SYSLITE DUO 375 12 www.festool.com 371 Illuminating Overview of products and applications Page 373 374 375 SYSLITE UNI SYSLITE DUO SYSLITE KAL II Applications For illuminating smaller surface areas For illuminating larger surface areas For illuminating large rooms Work independent of the mains power supply Extremely Appropriate appropriate 372 Vibration and emissions values can be found in the operating manual at www.festool.com/vibration Illuminating SYSLITE UNI torch SYSLITE UNI The light to the tool. u Three powerful, energy-efficient, high-performance LEDs u Lamp head can be adjusted into nine different positions by a vertical angle of 135° u Stable and tilt-resistant, or can be flexibly attached using belt clip and trestle hook Technical data Battery voltage (V) 10,8/18 Light source 3 SMD LEDs Small, but surprisingly powerful. Lumen value (lm) 43 The handy SYSLITE UNI is always ready to Weight (without battery pack) (kg) 0,34 light up dark corners. Its lightweight and compact design makes it a welcome working aid. It is compatible with all conventional Festool batteries. Items included Order no. SYSLITE UNI 769079 scaffolding holder, without charger, without battery pack, in self-service display pack 12 www.festool.com 373 Illuminating SYSLITE KAL II SYSLITE KAL II The light to the tool. u Excellent light thanks to 12 high-performance LEDs u Long life and robust thanks to shatter-proof housing u Continuous use – any Festool battery pack can be attached to supplement the internal battery. The 230 V mains power pack and vehicle charging cable offer additional charging and power supply options u Various battery charge options for the internal 7.2 V battery for maximum operational readiness Technical data Light source (W) 12 x 1,5 Lumen value 1st/2nd stage (lm) 310/769 Operating time (internal battery) 1st/2nd stage (min) 290/110 Li-ion battery capacity (Ah) 2,9 Li-ion charging time (min) 200 Permissible operating temperature range (°C) -5/+ 55 Operation with external Festool battery packs (V) 10,8 – 18 Hook opening (mm) 40 Thread size stand (") 1/4 Dimensions (L x W x H) (mm) 80 x 100 x 150 Total flexibility. Weight (without battery pack) (kg) 0,7 5 available installation and mounting positions: The SYSLITE KAL II lights up the darkest of corners for up to 6 hours non- Items included Order no. stop. The housing is made from shatter- integrated lithium-ion battery 7.2 V, 230 V adapter, car charger adapter, proof, shock-proof and impact-resistant transport bag, in self-service display pack cast aluminium – durable enough for any KAL II 500721 construction site. The light dispersion angle KAL II-Set 499815 of 170° ensures extensive, homogeneous magnetic spherical head with flat disc illumination of the work space. System accessories from page 376 374 Illuminating SYSLITE DUO working light SYSLITE DUO Because light quality is reflected in the quality of your work. u Unique LED configuration for 180° scattering angle and homogeneous illumination u High illuminating power (8000 lm) for brilliant lighting of a large surface area u Daylight-like colour (5000 K) u Sturdy and durable with 10,000-hour lifetime (L70) and shock-proof corners Technical data Colour (K) 5.000 Light source (W) 80 x 1,4 Lumen value (lm) 8.000 LED service life (L70) (H) 10.000 Colour rendering index, Ra 80 Housing protection class IP 55 Safety class 1 Cable length (m) 4,9 Weight (kg) 3,4 Items included Order no. DUO 200164 A new generation of light. in carton Illuminates extensively, instead of selectively. DUO-Plus 769962 in SYSTAINER SYS 3 T-LOC Can be used with the stable tripod extended DUO-Set 574653 up to a height of 2.00 m and stowed away ST DUO 200 tripod, in SYSTAINER SYS 3 T-LOC safely in a SYSTAINER. One-hand grip, suspension means and cord holder? But of course. Festool SYSLITE DUO 12 This luminaire contains built-in LED lamps. ++ A L A+ E A D B C System accessories D E from page 376 The lamps cannot be changed in the luminaire. 874/2012 www.festool.com 375 Illuminating System accessories Magnetic spherical head 4:4-*5&,"-** Tripod 4:4-*5&%60 Accessories for SYSLITE KAL II, SYSLITE DUO working lights Denomination Explanation Order no. 1 Magnetic spherical head MA KAL for Festool guide rail clamps, spherical head can be rotated 360°, for flexible positioning 499814 of the work light SYSLITE KAL and KAL II, pad for external stand, magnetic holding force 16 kg, in self-service display pack 2 Tripod ST DUO 200 for SYSLITE DUO, continuously height-adjustable from 150 to 200 cm via two pull-outs, 200038 folds to save space and easy to transport at just 5,6 kg, in carton 376 Illuminating See everything; work with more precision – with the light for your tool. The SYSLITE DUO working light, SYSLITE KAL working light and the portable SYSLITE UNI – whichever you choose, all our lighting solutions are developed with the same aim in mind as our tools: Making your work easier, and improving your results, by providing excellent lighting for every situation – from small surfaces through to entire rooms. Because top-quality lighting is a necessary condition for top-quality work. SYSLITE UNI SYSLITE KAL II SYSLITE DUO Small and compact for ultimate mobility. Turns dark surfaces into work surfaces Extensive illumination (mains-powered) Compatible with all Festool battery packs. in an extremely versatile manner. Can be of entire rooms with light quality that positioned or suspended in five positions replicates daylight. Can be used in a wide and powered by a wide variety of sources variety of ways: Stands alone on the floor (internal battery, battery pack, mains cable or flat surfaces, attaches to the Festool or car charger). tripod or, if preferred, hangs on hooks using the suspension means on the rear side of the SYSLITE DUO. The latest member of the Festool light family: The new SYSLITE DUO. Because light quality is reflected in the quality of your work. Experience the difference: Classic halogen lamp Conventional LED light Festool SYSLITE DUO 12 Yellow luminous colour, diminishes in Small scattering angle, lower luminosity. 180° scattering angle, uniform two- peripheral vision. dimensional illumination, replicates the colour of daylight. Plus: Thanks to SERVICE all-inclusive , you can now trial the SYSLITE DUO for up to 15 days. For more information and details of other services, visit www.festool.com/service www.festool.com 377 378 Workplace organisation 13 Compact Module System CMS 380 Multifunction table MFT 3 382 Vacuum clamping system VAC-SYS 383 Guide systems FS/2, GECKO 384 Vacuum clamping nozzle CT WINGS 386 Boom arm ASA 387 Energy box EAA 388 Workcenter WCR 389 Multifunction stool MFH 1000, UCR 1000 390 Toolcenter TC 3000/2 TC 3000/2 391 Site radio SYSROCK BR 10 392 Power distributor SYS-PowerHub 393 Storage systems SYSTAINER, SORTAINER, Sys-ToolBox 394 Transportation systems SYS-Port, SYS-Roll, SYS-Cart 395 Accessories and consumable materials 396 The Festool system 13 www.festool.com 379 Workplace organisation The CMS Compact Module System CMS Compact Module System. Safe and convenient. Open to change. The machines can be switched on and off from the basic unit. Five machines in one. Stationary or Mobile and stable. handheld. Covers 0.5 m². Only possible At only 10.8 kg, the basic unit is extremely lightweight yet robust. with a system. The CMS Compact Adjustable height. Module System consists of a basic Foldaway legs on the basic unit allow you to work on the floor or standing up. unit and compatible modules that transform the unit into a stationary bench-mounted saw, jigsaw, bench- Easy to extend. mounted router or belt sander. A comprehensive selection of accessories such as the sliding table, angle stop and extension table are available so the CMS can be adapted for a wide range of applications. CMS modules TS 55 R Plunge-cut saw Module mounting CMS-TS 55 R Module CMS-MOD-TS 55-R Page 20 Page 23 Page 23 Circular saw TS 75 Module mounting CMS-TS 75 Module CMS-MOD-TS 75 Page 22 Page 23 Page 23 Router OF Module mounting CMS-OF Page 156 Page 160 Module mounting CMS-PS (PS 420/400) Page 19 Pendulum jigsaws PS ADT-PS 400 adapter table Page 16 Page 42 All modules in the established Basis-Plus System can be combined with the basic unit of the CMS, except for the Basis 1 A module. Module CMS-MOD BS 120 Page 95 380 Workplace organisation The CMS Compact Module System Basic unit CMS module or hand-guided machine plus Bench-mounted machine CMS module mounting Basic unit Bench-mounted machine Bench saw CMS-TS 55 R Set Page 23 Bench saw with TS 75 Bench-mounted router TF 2200 Set Page 161 TF 1400 set Page 161 Technical data Table height, legs unfolded 900 mm Bench-mounted router with OF 1010 Table height, legs folded away 316 mm Table dimensions 585 x 400 mm Weight 10.8 kg Delivered parts Order no. Basic unit CMS-GE 561228 Basic unit for fitting CMS modules, Bench-mounted jigsaw with PS foldaway legs, main safety switch, cable holder/workpiece holder, cable and socket 13 Bench-mounted belt sander with BS 120 www.festool.com 381 Workplace organisation Multifunction table MFT 3 MFT 3 1 table. 1000 possibilities. u Maximum precision – with aluminium profile for retaining a guide rail and the angle stop u Angle stop, stop slide and additional clamping device ensure exact results u Ergonomic work position thanks to the table height of 90 cm u Mobile use of the MFT 3 through space-saving foldaway legs Technical data Table dimensions (mm) 1.157 x 773 Table height, legs folded away (mm) 180 Table height, legs unfolded (mm) 900 Max.

Load more

  62

Copy Link