Product Catalogue Australian

Total Page:16

File Type:pdf, Size:1020Kb

Product Catalogue Australian Largest Product Selection TM The Original Touch Up Company 60 Years of Innovation Professional Finishing Products Complete Line of Leather Products Australian Product Catalogue September 2018 Hands-On Training TION AC F S G I U T A A R S A N T 1 E D E INDEX Adhesives Finishes Aerosol Adhesive 37 Clears Industrial Grade Instant Adhesive Cyanoacrylate Glue 37 Classic Instrument Lacquer 33 Loctite Vinyl, Fabric & Plastic Adhesive 37 Clear Spray Shellac 32 Cleaners Finisher’s Choice Clear Lacquer 33 Crystal and Glass Cleaner 02 Finish-Up Polyurethane 29 Quick Clean 02 Outdoor Acrylic Aerosol 31 Wax Wash Remover 02 Perfect Blend 31 Colour Perfect Blend Waterborne 31 Pre-Catalysed Clears 30 Colour Systems Tone Finish Clears 30 Break-A-Way Glaze 26 Ultra Bond Waterborne Clear Finish Marker 29 Bronzing Powder 26 Ultra-Flo Ultra Bond Clear 30 Coloured Lacquer Enamel 25 Waterborne Brushing Urethane 33 Finishers’ Glaze Glazing Stain 26 Waterborne Pre-Catalysed Lacquer 32 Metallic Aerosol 25 Wil Pro Padding Finish 32 Primer Sealer 25 Wiping Wood Stain Aerosol 25 Sanding Sealers E-Z Vinyl Sealer Aerosol 28 Touch-up Colours Pre-Catalysed Sanding Sealer 28 Accent Pencils 21 Tone Finish Flat Easy Sanding Sealer 28 Background Marker 19 Hydro Care Wood Floor System Background Marker Glaze Hang-Up 19 Hydro Care Wood Floor Protector 38 Blendal Powder Stain 23 Hydro Cleaner Wood Floor Cleaner 38 Blendal Sticks 22 Natural Wax Care for Natural Oiled and Pre-finished Floors 38 Block-It Toner 24 Brush Tip Graining Markers 20 Miscellaneous Products Graining Pencils 21 Crackle Lacquer 40 Pro-Mark Marker 17 Danish Oil Aerosol 40 Quik-Tip Marker 20 E-Z Slip Lubricant 40 Shadow Toner 24 Lacquer for Brass Aerosol 40 Tone Finish Toner 24 Polishes Ultra Classic Toner 23 Furniture Cleaner & Restorer 36 Ultra Fine Grainer 21 Oz Polish 36 Ultra Mark Marker 18 Scratch & Mar Resister Polish 36 Fillers Scratch Off 36 Burn-in Tools & Accessories Retarders & Reducers Burn-in Balm 14 Blender Flow-Out 34 Burn-in Knife 14 Lacquer Reducer 2255 34 E-Z Seal Pen 14 No Blush Blender Flat 34 Micro Therm Flameless Heat Gun 14 No Blush Plus Retarder 34 Super Blush Retarder 34 DIY Fillers Mohawk 3-in-1 Repair Stick 04 Rubbing Compounds PERMAFILL Wood Repair System 05 Poly-Buf Rubbing Compound 35 Pumice Stone 35 Hard Fill Tools Wool-Lube Rubbing Lubricant 35 Burn-In Knife, Battery Operated 15 Tools & Hardware Finish & Fill Scraper 15 CA Glue Tips 12 Pack 41 Hard Filer Scraper (replacement) 15 Clear Bumper Disc 42 Hard Fill Levelling Tool 15 Finisher’s Colourwheel 42 Hard Waxes/Wax Burn-Ins Match All Graining Brush 42 Hard Fill 10 Mohawk Cap 42 Hard Fill Kit 11 Mohawk Craftsman Apron 42 Hard Fill Plus 12 Mohawk Leveller Card 42 Quick Fill Burn-In Stick 09 Power Pack (Preval) 41 Sand Thru Stick 08 Pressure Unit Spray Tool 41 Pro-Mark Marker Pouch (Empty) 42 Putties Red Sable Art Brush #3 42 Epoxy Putty Stick 08 Replacement Nibs 41 Fil-O-Wood Wood Putty 07 Spray Heads 41 Fil-Stik Putty Stick 06 Patchal Putty 07 Training & Literature The Mohawk Professional Finishing System DVD 42 Resin Burn-Ins Understanding Wood Finishing by Bob Flexner 42 E-Z Flow Burn-In Stick 13 Wood Touch-Up And Repair DVD 42 01 CLEANERS Quick Clean Quick Clean contains a combination of solvents that remove even the toughest marks from timber without damaging the timber or finish. Quick Clean is ideal for cabinets, furniture, appliances, woodwork, and other finished surfaces. Uses: ✓ Clean timber surfaces. Advantages: ✓ Dries quickly, low odour, non-greasy formula. ✓ Removes labels and glue from most surfaces. ✓ Removes unwanted glaze during the glazing process. ✓ Cleans and prepares finished surfaces prior to applying an additional finish coat. Available as: ✓ M107-3012 384ml Aerosol Wax Wash™ Remover Removes wax, oil and foreign materials from most surfaces in one application. The presence of wax, oil or foreign materials can retard drying or cause defects in finishing top-coats. Prior to applying a new finish or repair, surfaces with Wax Wash™ Remover. Ideal for furniture, appliances, woodwork and other surfaces. Uses: ✓ Clean timber surfaces. Advantages: ✓ Removes wax, oil and foreign materials from most surfaces. ✓ Cleans and prepares finished surfaces prior to applying an additional finish coat. Available as: ✓ M107-0190 384ml Aerosol Crystal and Glass Cleaner Windows, mirrors, and crystal remain clean longer when cleaned with Crystal and Glass Cleaner. This cleaner dries crystal clear in seconds without leaving a dirt catching film. Also used for cleaning refrigerators, stoves, chrome and other appliances. Uses: ✓ Clean glass and crystal. ✓ Clean refrigerators, stoves and other appliances. ✓ Clean chrome. Advantages: ✓ Easy to use. ✓ Dries in seconds. ✓ Non-dirt catching. Available as: ✓ M107-0485 384ml Aerosol 02 FILLERS DIY Fillers Mohawk 3-in-1 Repair Stick 04 PERMAFILL Wood Repair System 05 Hard Waxes Hard Fill 10 Hard Fill Kit 11 Hard Fill Plus 12 Quick Fill Burn-In Stick 09 Sand Thru Stick 08 Putties Epoxy Putty Stick 08 Fil-O-Wood Wood Putty 07 Fil-Stik Putty Stick 06 Patchal Putty 07 Resin Burn-Ins E-Z Flow Burn-In Stick 13 Burn-in Tools & Accessories Burn-in Balm 14 Burn-in Knife 14 E-Z Seal Pen 14 Micro Therm Flameless Heat Gun 14 Hard Fill Tools Burn-In Knife, Battery Operated 15 Finish & Fill Scraper 15 Hard Filer Scraper (replacement) 15 Hard Fill Levelling Tool 15 FILLER SELECTION GUIDE Product Ease of use Surface Application Durability Adhesion Sheen Page position time Fil-Stik 1 V&H 1 1 1 Any Page 7 Patchal Putty 1 V&H 1 1 1 Any Page 8 Fil-O-Wood Putty 4 V&H 5 4 5 Any Page 8 Epoxy Stick 5 V&H 5 5 5 Any Page 9 Sand Thru Stick 1 V&H 1 1 1 Any Page 9 Quick Fill 2 V&H 2 2 3 Any Page 10 Hard Fill 2 H 2 3 4 Any Page 11 Hard Fill + 2 H 2 4 4 Any Page 13 EZ Flow 5 H 3 3 5 High Page 14 03 Mohawk 3-in-1 Repair Stick The intuitive and easy to use 3-in-1 Repair Stick completes repairs with a single product, addressing filling and colour replacement all in one. Available in both stain and painted finish colours, customers can feel confident they will be satisfied with the results.This product comes in an easy to display blister pack. Advantages: ✓ Industrial quality filler in 15 of the most popular colours. ✓ A “Patent Pending” leveller cap used to remove and level the filler. ✓ Industrial quality marker in 15 of the most popular colours containing both colour and finish. ✓ Fil-Stik™ and Marker in the same colour for ideal colour matching. ✓ Built in Levelling Tool to ensure a smooth and level repair. ✓ The 3 in 1 Repair Stick completes repairs with a single product, addressing filling and colour replacement all in one. ✓ Because it is a Fil-Stik™ and Marker in one, it takes up 50% less shelf space. ✓ Available in both stain and painted finish colours. “White” is the #1 colour today in Kitchen Cabinets (available at retailers today). ✓ Intuitive and easy to use. ✓ The user feels confident they will be satisfied with the results. Uses: ✓ To fill and recolour scratches, nicks, gouges and other minor damage on stained or painted timber finishes. Available as: M319-­‐3000B M319-­‐3001B M319-­‐3002B M319-­‐3003B M319-­‐3004B BLACK TRUE WHITE GOLDEN OAK LIGHT GREY CHERRY ✓ M319-3000B BLACK ✓ M319-3001B TRUE WHITE ✓ M319-3002B GOLDEN OAK ✓ M319-3003B LIGHT GREY ✓ M319-3004B CHERRY ✓ M319-3005B WALNUT M319-­‐3005B M319-­‐3006B M319-­‐3007B M319-­‐3008B M319-­‐3009B ✓ M319-3006B PERFECT BROWN WALNUT PERFECT BROWN NATURAL HONEY RED MAHOGANY ✓ M319-3007B NATURAL ✓ M319-3008B HONEY ✓ M319-3009B RED MAHOGANY ✓ M319-3010B CARAMEL M319-­‐3012B ✓ M319-3011B DARK GREY M319-­‐3010B M319-­‐3011B M319-­‐3013B M319-­‐3014B CARAMEL DARK GREY WHITE BROWN WHITE STAIN ✓ M319-3012B WHITE ✓ M319-3013B BROWN ✓ M319-3014B WHITE STAIN Colours shown may vary slightly from actual repair stick colours. They are a guide only. HOW IT WORKS Step 1: Step 2: Step 3: Use marker tip to Use wax stick to fill Use the Leveller completely colour-in the damaged area. to skim off excess all damaged areas. fill material until any excess wax is completely removed and scratch fill is flush. 04 PERMAFILL™ Wood Repair System Multimaster is excited to introduce the Mohawk PERMAFILL™ Wood Repair System, the durable, no mess, easy-to-use solution for wood repairs. Any wood or laminate can be repaired with the Mohawk PERMAFILL™ System. The PERMAFILL™ System can be used to fill scratches, gouges or dents in stained or painted finishes, without sanding. Available as: Uses: ✓ M319-001 Retail kit ✓ To fill scratches, gouges or dents in stained or painted timber finishes. ✓ M319-002 Permafill dispenser Advantages: Retail Kit Contents: ✓ One tool with an easy to insert cartridge. ✓ PERMAFILL™ Dispenser (patent pending) ✓ One button operation – intuitive and easy to use – portable. ✓ 4 PERMAFILL™ coloured filler cartridges (patent pending): ✓ Repair dents, scratches, gouges, in all types of wood and laminate surfaces. Black, White, Hickory and Walnut ✓ One dispense repairs an average 1-2 inch scratch. ✓ 1 Brush Tip Marker (to adjust colour and add grain lines) ✓ Change cartridge to another colour and make repairs on another piece ✓ PERMAFILL™ levelling tool immediately! ✓ Finishing pad and cleaning card, a finishing cloth, 4 AA ✓ No messy clean-up, no excess usage of product. batteries and an instruction sheet. ✓ Convenient, fast and durable repairs in minutes.
Recommended publications
  • Reserva Series - Designer Collection Specifications
    General Reserva Series - Designer Collection Specifications White Oak, Cerralvo Products Species White Oak Grade Exclusive: Moderate color variations and wood natural characteristics, such as sound and open knots, as well as knots filled with wood putty, mineral streaks, surface checks and splits. Style Torrefied Maturation The color of the wood may undergo slight discoloration depending on the amount of light the floor is exposed to. This phenomenon, called oxidation, is inherent to the thermally modified products. Texture Smooth Sheen (Gloss Level) Matte (20%) Color Cerralvo Maintenance Recommended hardwood flooring cleaning products Uses Residential & light commercial Warranties Structural: Lifetime (Please refer to the Installation Guide) Finish wear-through: Residential: 35 years Light commercial: 5 years Relative Species Hardness White Oak: 1,360 lbs - 5% harder NWFA Janka - Hardness Test (ASTM-D-143) Red Oak 1,290 lbs* - 100% *lbs = Applied force in pounds Finish TitaniumTM Finish Polymerized titanium finish enhanced with nanotechnology Characteristics Appearance: Superior Durability: Superior Gloss losing resistance: Superior Stain Resistance: Superior Easy to maintain: Superior Easy to repair: Superior Solvent & Water: Free Formaldehyde: Free Antimicrobial Protection ISO 22196 & ASTM G-21 Ultra Fresh (Ultra Fresh is a registered trademark of Thomson Research Associates.) Static Friction Coefficient ASTM D-2394-99 Slippery resistance coefficient more than 0.5 Pure Genius® Smart Floor Technology Air-Purifying Titanium Dioxyde Photocatalytic
    [Show full text]
  • Woodstain Filler
    TDS0120 Established: 25 Feb 2013 Updated: 07 Mar 2017 TECHNICAL DATA SHEET FOR WOODSTAIN FILLER DESCRIPTION : WoodStain Filler is a semi-transparent, pigment-based gel stain. It gives colour to wood surface and enhances the beauty of wood grains TYPE : Woodstain filler based on urethane modified long oil alkyd COLOUR : Two colors (BurmeseTeak & Mahogany) USES : Ideal for the decoration and protection of interior wood surfaces such as wooden furniture, door, window frames, cabinet, molding and paneling FEATURES : Fade resistance Easy to stir and non-settling Non-grain raising No drips, runs or spills APPLICATION DATA METHOD : Cloth or sponge Rub WoodStain Filler in circular motion with lint-free cloth or sponge. Spread as far as possible to fill in the wood pore evenly THEORETICAL COVERAGE : 18 – 23 m² per litre (actual coverage is dependent on substrate condition) DILUTION : Ready for use after thorough stirring If necessary, dilute with 1 – 2% Bodelac 9000 GP Reducer or Mineral Turpentine to improve ease of application SURFACE PREPARATION : New or unpainted wood surfaces: Surface must be clean, dry and free from grease, paint, wax, dirt and other contaminants before painting Clean off mould, algae, lichen and moss with a wire brush Smooth bare wood surface to be painted using grade #60 or #80 sandpaper, working in the direction of the grain before dusting off If necessary, fill the wood grains with appropriate filler and smooth with sandpaper (grade #150 or #180) Wood must be relatively dry, moisture content should not exceed 12 % before painting Allow the paint to dry thoroughly before applying next coat Should fibre be observed, dry sand lightly before subsequent coat Page 1 of 3 TECHNICAL DATA SHEET FOR WOODSTAIN FILLER Previously Painted Wood Surfaces : If the previous paint film is in sound condition and without wax, smoothen it with sandpaper.
    [Show full text]
  • Color Chart.Pdf
    ® Finishing Products Division of RPM Wood Finishes Group Inc. Color Chart The Original Touch Up Company™ Made in the USA Color Chart ® Finishing Products Division of RPM Wood Finishes Group, Inc. Index Aerosols 1-5 Ultra® Classic Toner & Tone Finish Toner 1-3 Colored Lacquer Enamel 3-5 Shadow Toner 5 Touch-Up Markers/Pencils 5-15 Ultra® Mark Markers 5-9 3 in 1 Repair Stick 9 Pro-Mark® Markers 9-10 Quik-Tip™ Markers 10-11 Background Marker Touch-Up & Background Marker Glaze Hang-Up 11-13 Artisan Glaze Markers 13 Vinyl Marker Glaze Hang-Up 14 Brush Tip Graining Markers 14 Accent Pencils 15 Blend-Its 15 Fillers 15-29 Quick Fill® Burn-In Sticks 15-16 Edging/Low Heat Sticks 16 E-Z Flow™ Burn-In Sticks 16-17 PlaneStick® Burn-In Sticks 17-18 Fil-Stik® Putty Sticks 18-25 Hard Fill & Hard Fill Plus 25-27 PermaFill™ 27 Epoxy Putty Sticks 27-28 Patchal® Puttys 28-29 Knot Filler 29 Fil-O-Wood™ Wood Putty Tubes 29 Color Replacement 30-31 Blendal® Sticks 30 Sand Thru Sticks 30-31 Blendal® Powder Stains 31 Bronzing Powders 31 Dye Stains 32 Ultra® Penetrating & Architectural Ultra® Penetrating Stain 32 Dye Concentrate 32 Pigmented Stains 32-34 Wiping Wood™, Architectural Wiping Stain & Wiping Wood™ Stain Aerosols 32-33 Designer Series Stain, Designer Series Radiant Stain 33-34 Glazes 34 Finisher’s Glaze™ Glazing Stain & Aerosols 34 Break-A-Way™ Glaze & Aerosols 34 Leather Repair 35-37 E-Z Flow™ Leather Markers 35 Leather/Vinyl Markers 35 Leather/Vinyl Fil Sticks 35-36 Leather Repair Basecoat Aerosols 36 Leather Repair Toner Aerosols 36 Leather Repair Color Adjuster Aerosols 37 Touch Up Pigment 37 Leather Refinishing 37 Base Coat 37 NOTE: COLORS ARE APPROXIMATE REPRESENTATIONS OF ACTUAL COLORS USING MODERN PROCESS TECHNIQUES.
    [Show full text]
  • Mass Timber Design Guide Crosslam® CLT | Glulamplus® | Mass Timber Building Systems U.S
    Mass Timber Design Guide CrossLam® CLT | GlulamPLUS® | Mass Timber Building Systems U.S. VERSION Penticton Lakeside Resort, Penticton, BC, Canada Mica Heli-Ski Lodge, Mica, BC, Canada Beautifully engineered to change an entire industry. At Structurlam, it’s been our goal for more than 50 years to innovate and push the boundaries of our industry in order to create new limits of what it means to build with wood. Through our experience in bringing buildings to life, we’ve been proud to be part of developing and producing structures in exciting and efficient new ways. In fact, as the industry moved toward evolved, Structurlam has pioneered the use concrete and steel in commercial buildings, of cutting-edge technology and systems to we stayed true to ourselves. We understood bring your project from concept to reality. the advantages of building with wood and of From prefabrication of structural elements to laminating lumber into beams that could be erection on-site, BIM modeling permits the use used in larger structures. We embraced new of mass timber to be highly precise, efficient technology, such as 3D modeling and robotic and cost competitive. machinery, to fabricate complete mass timber By working with us, you’re always assured packages. This allowed us to introduce wood engineering expertise and design efficiency that into buildings where it was never considered reduces time and cost on-site. No job is too in the past. simple or too complex, and we’ll always work to The result is an array of high-performance mass help you build whatever you dream.
    [Show full text]
  • Plant Fiber Panels Installation Guide
    Easy DIY Eco-Friendly 3D Dimensional 3D Wall Board Installation Instruction Light Weight www.art3dwallpanels.com Installation Instruction Ⅰ Preparation: 1. Request for the wall surface 1) The wall surface must be flat,dry,clean and smooth, solid and painted with emulsion paint. 2) Aged wall surface must be smooththened and painted with water-based seal primer to compact the loose surface layer 3) Enviroment request: Open the window and make sure the room is clean and ventilated 2. Preparation for the commodity. Put 5pcs in one stack Open the box, put the boards on the floor Take out the boards for 24hours to balance the moisture carefully between the panel and the enviroment to prevent excessive expansion or contraction after installation 3. Tools Needed Tap Measure Level Pencil Applicator Barrel Brush Putty Knife Sandpaper 4. Supporting Materials All the supporting materials are Dufa products Acrylic water-based Acrylic water-based Acrylic water-based Adhesive (Titebond from wood putty PU wood paint wood seal primer USA recommended.) www.art3dwallpanels.com Installation Instruction Ⅱ Installation Steps 1. Measure the wall and plan the design. 1) Measure and mark horizontally and vertically the area of installation 2) Select a pattern for installation. Arrange it on the floor by rotating the panels before attempting to install ensuring correct installation of the desired pattern. 3) If the area for installation is not square, or just meet the connection of the circuit, the panels can be cutted by knife 2. Adhere with All-purpose adhesive glue (Titebond made in USA recommended) 1) Use the all-purpose adhesive glue to dot on 2) After dot the glue on the boards, put it on the wall the board every 30 to 50 mms on the flat surface, and take it out asap.
    [Show full text]
  • Comparison of Two Wood Filler Types with Respect to Relative Shrinkage Across Variations in Temperature, in Humidity, and Within Wood Species
    CORE Metadata, citation and similar papers at core.ac.uk Provided by The University of North Carolina at Greensboro COMPARISON OF TWO WOOD FILLER TYPES WITH RESPECT TO RELATIVE SHRINKAGE ACROSS VARIATIONS IN TEMPERATURE, IN HUMIDITY, AND WITHIN WOOD SPECIES By Joshua Lee Ellis A Thesis Submitted to the Faculty of the Graduate School of Western Carolina University in Partial Fulfillment of the Requirements for the Degree of Master of Science in Technology Committee: ________________________________________________Director ________________________________________________ ________________________________________________ ________________________________________________Dean of the Graduate School Date: ___________________________________________ Summer 2011 Western Carolina University Cullowhee, North Carolina COMPARISON OF TWO WOOD FILLER TYPES WITH RESPECT TO RELATIVE SHRINKAGE ACROSS VARIATIONS IN TEMPERATURE, IN HUMIDITY, AND WITHIN WOOD SPECIES A thesis presented to the faculty of the Graduate School of Western Carolina University in partial fulfillment of the requirements for the degree of Master of Science in Technology. By Joshua Lee Ellis Director: Dr. Aaron K. Ball Professor of Engineering Technology Kimmel School Department of Engineering Technology Committee Members: Dr. Wes Stone, Engineering Technology Dr. Chip Ferguson, Engineering Technology June 2011 © 2011 by Joshua Lee Ellis Acknowledgements Special thanks to my committee composed of Dr. Aaron Ball, Dr. Wes Stone, and Dr. Chip Ferguson. Specifically, I would like to thank Dr. Aaron Ball for his lifelong commitment to delivering education to students. I have had many teachers throughout my educational career, but none quite like Dr. Aaron Ball. Dr. Aaron Ball is “one of a kind” and it was an honor to have him as a mentor. Dr. Aaron Ball has truly helped me realize that the only person that can stop you from accomplishing your dreams is yourself.
    [Show full text]
  • Wood Surface Preparation
    HF-LRA.054 WOOD SURFACE PREPARATION The key to a successful refinishing job is the preparation of the surface. The wood surface must be smooth and clean; since any scratches will be more noticeable after the finish is applied than they are in the bare wood. Never use sandpaper on an antique. The surface preparation procedure you follow depends on the characteristics of the wood piece and the stripping (if any) procedure you followed. Sanding The majority of the surface preparation should be performed with steel wool. There will be cases, however, when it will be necessary to use sandpaper. If you are working with new wood which has never been finished, it is necessary to sand the wood to get a smooth, even surface. Sanding will also be necessary if the grain of the wood has been raised during stripping. If you must use sandpaper, read this section carefully. Sandpaper is defined by the type of abrasive used and also the size (or grit) of the abrasive particles. The major types of abrasives include: 1. Aluminum Oxide - very hard and durable abrasive grains good for sanding metals and hard woods. 2. Garnet - abrasive grains have very sharp edges, but they are not as tough as aluminum oxide grains. Good for all woodworking operations. 3. Flint - least expensive sandpaper. Flint has sharp edges but dulls fast because of low toughness and durability. Good for woodworking operations. 4. Emery - hard but dull particles that cut slowly resulting in a polishing action. Generally not recommended for use on wood but can be used for final smoothing operation.
    [Show full text]
  • 40 CFR Ch. I (7–1–12 Edition) § 63.2291
    § 63.2291 40 CFR Ch. I (7–1–12 Edition) § 63.2291 Who implements and en- ess units associated with the manufac- forces this subpart? turing of plywood and composite wood (a) This subpart can be implemented products. The affected source includes, and enforced by the U.S. EPA or a dele- but is not limited to, green end oper- gated authority such as your State, ations, refining, drying operations (in- local, or tribal agency. If the EPA Ad- cluding any combustion unit exhaust ministrator has delegated authority to stream routinely used to direct fire your State, local, or tribal agency, process unit(s)), resin preparation, then that agency has the authority to blending and forming operations, press- implement and enforce this subpart. ing and board cooling operations, and You should contact your EPA Regional miscellaneous finishing operations Office to find out if this subpart is dele- (such as sanding, sawing, patching, gated to your State, local, or tribal edge sealing, and other finishing oper- agency. ations not subject to other NESHAP). (b) In delegating implementation and The affected source also includes on- enforcement authority of this subpart site storage of raw materials used in to a State, local, or tribal agency the manufacture of plywood and/or under 40 CFR part 63, subpart E, the composite wood products, such as res- authorities contained in paragraph (c) ins; onsite wastewater treatment oper- of this section are retained by the EPA ations specifically associated with ply- Administrator and are not transferred wood and composite wood products to the State, local, or tribal agency.
    [Show full text]
  • CIP March 13.Cdr
    CONTINUAL IMPROVEMENT PROGRAMME 1st March 2013 For internal circulation only Phase - III Vol.:XII Painting – Part 2 3. FINISHING WOOD WORK : 3.2.1.4 On clean prepared surfaces, wood primer is to be applied by brushing, covering all areas uniformly. Surface Wood work is generally finished in five different ways - preparation is as stated above. White or pink primer is as a) painting with synthetic enamel paints [alkyd based in oil] per specification. b) painting with poly urethane based transparent paints [like asian paints' 3.2.1.5 Two primer coats are necessary mainly because of time touch wood or melamine] lapse between making the joinery and fixing in position. Besides while fixing the joinery work [ddors and windows] c) french polish or varnish - transparent finish again with spirit varnish in masonry or concrete, cement mortar and dust are likely [xylene or alcohol based] to settle on the wood work. d) shellac polish – red lac in spirit or oil 3.2.1.6 Again another time lapse may [generally] take place before e) wax polish - linseed oil and bee wax or tung oil with or without colouring final painting on these members are taken up after fixing in pigments The synthetic enamel finish offers protection to wood, position [making done parallel to RCC frame work, then completely covers the natural grains or texture of the wood [may be walls are taken up during which these frames go into many may not like this]. Other finishes retain the wood's natural grain position. After plastering & floor finishes are done, this appearance and at the same time offers protection to wood.
    [Show full text]
  • Technical Data Sheet
    Manufactured by: Eclectic Products, Inc. Pineville, LA 71360 TECHNICAL Made in the USA DATA SHEET 800.767.4667 - Technical Services eclecticproducts.com Wood-Tex® Synthetic wood-tex.com Wood Filler PRODUCT DESCRIPTION Wood-Tex® is a resin-based wood filler, developed for the plywood and furniture industries, used to repair defects in plywood, furniture, laminated beams, cabinet work, and other woodwowrking applications. It molds like putty and is consistent, uniform, waterproof and fast-setting with minimal shrinkage. Made with genuine wood flour, Wood-Tex® can be sanded, stained, sawed, planed or drilled like ordinary wood. PRODUCT CHARACTERISTICS and BENEFITS High solid content Saw, drill, sand, plane and nail, just like real wood Fast dry time Indoors and outdoors Easy application Spreads evenly into cracks and holes without crumbling or cracking Superior strength Hard finish with little or no shrinkage Quality finish Takes stains and paints evenly with minimal sanding PHYSICAL PROPERTIES OF WOOD-TEX SYNTHETIC WOOD FILLER Color(s) 6: Cherry/Dark Mahogany, Fir/Maple, Natural/Ash, Red Oak, Walnut, White Pine Density 12 - 13 lbs/gal Solids 75% ± 1.0% (by weight) Viscosity 440,000 to 550,000 cps Vehicle Nitrocellulose Lacquer Volatile content 12.69% ± 0.07% (VOC 215 g/L) Storage Store between 45 and 85 °F (7 and 29 °C) Freeze/thaw stability None; do not freeze Shelf life 1 year DIRECTIONS FOR USE and APPLICATION NOTES Please read all directions before using. Always test a small area before full use. Step 1 For best adhesion, crack or defects should be clean and dry. Step 2 Press firmly into defect by hand, or with putty knife.
    [Show full text]
  • EZ Click Hardwood Flooring Installation, Care and Warranty Guide
    EZ Click Hardwood Flooring Installation, Care and Warranty Guide Warranty coverage may be lost due to failure to strictly abide by all the installation instructions and recommendations in this manual. This includes the use of improper tools and materials. Read all instructions carefully. Rev.20091120 Part I INSTALLATION AND CARE: Product Description: EZ Click hardwood flooring planks are designed for use in multiple locations. Acceptable location includes basements, ground floors or high-rise buildings. EZ click flooring can be floating on, directly nailed or glued to a wooden or concrete sub-floor. Professional advice should be sought for the type of glue and method of glue-down installation to ensure trouble free installation. EZ Click flooring is made of a wear layer of solid wood lamella mounted under high pressure to produce premium quality flooring. These products are pre-finished under ideal conditions that meet or exceed industry standards. Where to install and Method to install: Grade Type Staple Down Glue Down Floating Above Grade Yes Yes Yes On Grade Yes Yes Yes Below Grade No No Yes Sub-floor Type Staple Down Glue Down Floating Concrete No Yes Yes Plywood & OSB Yes Yes Yes Old wooden floor, particleboard, pressed board & other non-wood Site Specific Site Specific Yes sub-floor Site Specific – depending on the degree of levelness, firmness and soundness of the sub-floor. Sub-floor should be sound, level and free of debris. The following is as defined by NWFA Hardwood Flooring Installation Guidelines - Section V for moisture testing: Concrete moisture readings are not to exceed 4.5% on Tramex Concrete Moisture Encounter meter.
    [Show full text]
  • Understanding Wood Finishing –
    UNDERSTANDING WOOD FINISHING How To Select And Apply The Right Finish By Bob Flexner WHY FINISH WOOD, ANYWAY? Sanitation Stabilization Decoration PREPARING THE WOOD SURFACE Preparing the Lumber Sanding and Smoothing Sponging Sharpening a Hand Scraper Sharpening a Cabinet Scraper Solvents for Removing Cured Glues Glue Splotches Dents, Gouges, and Holes Wood Putties TOOLS FOR APPLYING FINISHES Rags Brushes Rubbing Pads Spray Guns and Equipment Common Spraying Problems OIL FINISHES Our Ancestors and Linseed Oil Applying "Oil" Finishes Oil Finishes and Penetration How Oil and Oil/Varnish Finishes Protect Types of "Oil Safety and Oil Finishes Using Wax as a Finish Bleeding Oil Finishes Which One Is Which? How to Tell Which "Oil" You Have How to Maintain and Repair "Oil" Finishes Guide to "Oil" Finishes STAINING WOOD What Makes a Stain Understanding Stains A Guide to Stains Using Aniline Dyes Bleaching Wood Chemical Stains Ebonizing Wood Matching Color A Sampler of Wood Stains Solvents and Thinners for Dyes and Stains Compatibility of Stains and Finishes How Woods React to Stains Applying Stain Applying Glaze Pickling Common Staining Problems, Their Causes, and Solutions FILLING THE PORES Filling the Pores with the Finish Filling the Pores: Finish versus Paste-Wood Filler Filling the Pores with Paste-Wood Filler Using Oil/Varnish Paste-Wood Filler Using Water-Based Paste-Wood Filler INTRODUCTION TO FILM FINISHES........... What's in a Name? Sealers and Sanding Sealers The Way Finishes Cure Finishing Materials: How They Cure Stain and Finish
    [Show full text]