Use and Styling Guide
Total Page:16
File Type:pdf, Size:1020Kb
■ Do not use outdoors or operate ■ This appliance has a polarized plug where aerosol (spray) products are (one blade is wider than the other). How to Use IMPORTANT SAFETY being used, or where oxygen is As a safety feature, this plug will Product Features being administered. fit in a polarized outlet only one INSTRUCTIONS ■ Always store this appliance and way. If the plug does not fit fully Thank you for choosing Remington. Your clipper is designed to perform dependably 1 Line Cord Safety Tips 10-15 seconds to remove excess hair cord in a moisture-free area. in the outlet, reverse the plug. If it and efficiently for years helping you to maintain a range of hair styles. NOTE: This appliance has a polarized and debris. To reattach blade, align Do not store it in temperatures still does not fit, contact a qualified plug (one blade is wider than the notch on blade assembly with receiver Models HC5010, HC5015, HC5020, HC5030 When using an electrical appliance, exceeding 140°F (60°C). electrician. Do not attempt to other). As a safety feature, this plug on clipper body and simply snap back defeat this safety feature. basic precautions should always be WARNING ■ Do not plug or unplug this will fit in a polarized outlet only one into place. DO NOT RINSE CLIPPER observed, including the following. To reduce the risk of burns, fire, appliance when your hands are ■ Do not use this appliance with a Part HC5010 HC5015 HC5020 HC5030 way. If the plug does not fit fully in BODY IN WATER. Read all instructions before using electric shock or injury to persons: wet. damaged or broken cutting unit, 1. Clipper Unit x x x x the outlet, reverse the plug. Use and this appliance. as injury may occur. Always make ■ This appliance is for household ■ Do not use an extension cord If it still does not fit, contact a quali- certain blades are aligned properly. 2. Style Guide x x x x use only. or a voltage converter with this fied electrician. Do not attempt to ■ This clipper is designed for use 3. Blade Guard x x x x defeat this safety feature. Styling Guide ■ An appliance should never be left appliance. DANGER with 120 Volts AC, 60 HZ electrical 4. Light Texture Comb x HC5010 HC5015 HC5020, unattended when it’s plugged in. ■ Always attach the plug to the 1. To insert plug, grasp it firmly and To reduce the risk of electric shock: outlets. Do not connect the clipper 5. Heavy Texture Comb x HC5030 ■ appliance, then to the outlet. To guide it into outlet. ■ Do not reach for an appliance that Close supervision is necessary to a higher voltage than indicated, # disconnect, turn all controls to 6. 0 (1.5 mm) Guide Comb x x x 2. To disconnect the appliance, grasp has fallen into water. Unplug it when this appliance is used by, as it may result in personal injury Taper Lever OFF, then remove plug from outlet. 7. #1 (3 mm) Guide Comb x x x x the plug and remove it from outlet. The HC5020 and HC5030 include a immediately. on, or near children or persons and/or damage to the clipper. Detach removable power cords # Do not pull or yank on the cord or Taper Lever. Use the Taper Lever to ■ Do not use while bathing or in with special needs. 8. 2 (6 mm) Guide Comb x x x x from appliances for storage. # appliance. Do not wrap the cord add versatility to your hair cuts by the shower. ■ Use this appliance only for its 9. 3 (9 mm) Guide Comb x x x x ■ around the appliance. changing the closeness of the blades intended use as described in this Do not place this appliance on any 10. #4 (12 mm) Guide Comb x x x x 14 ■ Do not place or drop into water surface while operating. gradually. The Taper Lever has 6 or other liquid. manual. Do not use attachments 11. #5 (16 mm) Guide Comb x x x 2 5 not recommended by Spectrum Thin Hair Lifter length options with the fully forward ■ Do not place or store this appliance 12. #6 (18 mm) Guide Comb x x x 13 24 The Thin Hair Lifter (item 18), is perfect position providing the closest cut. Brands, Inc. 4 15 where it can fall or be pulled into a # for use on thin or curly hair. Additional Moving the lever gradually backward ■ Keep the cord away from heated 13. 7 (22 mm) Guide Comb x x x 25 tub or sink. # teeth help to pickup hairs that may lie increases the length. surfaces. 14. 8 (25 mm) Guide Comb x x 12 ■ Always unplug this appliance from 9 flat, making them difficult to cut. To ■ Never operate this appliance if it 15. #9 (30 mm) Guide Comb x the electrical outlet immediately use, snap Thin Hair Lifter onto desired Blade Care after using. has a damaged cord or plug, if it is 16. Left Ear Taper x x x x 11 guide comb then use guide comb as not working properly, if it has been 17. Right Ear Taper x x x x 8 normal. The life of your clippers will depend ■ Unplug this appliance before 3 on frequency of use, care, hair type, dropped or damaged, or if it has 17 26 cleaning it. 18. Thin Hair Lifter x x x 10 and condition. The HC5015 and been dropped into water. If any 7 SAVE THESE INSTRUCTIONS 19. T-Brush x x x x Removable Blade Assembly HC5020 have blades that do not of these things happen, return 27 The HC5030 has a removable blade 20. Neck Brush x x x require additional oiling. To maintain the appliance to a Remington 18 16 assembly that allows you to brush out authorized service center for 21. Nylon Cape x x x 6 the HC5010 blades in peak condi- and rinse the blades under water for tion, apply oil after every three to examination and repair. 22. Standard Storage Case x easy cleaning. DO NOT rinse clipper ■ Never drop or insert any object into four haircuts. The HC5030 has a 23. Deluxe Storage Case x x body in water. Blades can only be removable blade assembly that can any of the appliance’s openings. 19 24. Oil Bottle x x rinsed when they are detached from be rinsed under water. It is recom- Register Your New Product Today! clipper body. To remove, grasp blade 25. Scissors x x x x mended to oil the blades after each By registering your new Remington® product, you will receive these important benefits: assembly firmly in one hand and clip- 26. Barber Comb (7”) x x x time it is rinsed. Proof of Ownership • Product Protection • Product Registration • Special Offers per in the other hand, then pull apart. 20 Rinse blades under running water for Register online at: www.RemingtonProducts.com 27. Sectioning Clips 2x 4x 4x 21 22 23 a. The Remington product; b. The original sales receipt indicating price and date purchased; and How to Use Styling Guide Performance Guarantee c. The completed 60-day money back guarantee form located at Warranty 2. Replace longer guide comb with RemingtonProducts.com/60day. Before Cutting Hair To Attach Guide Combs Giving a Comfortable, shorter desired length. Repeat ear guide. The shorter guide teeth Trimming Beards & 3. In addition, Remington, in its discretion, must determine that the returned This warranty gives you specific legal Questions or comments: step 1, but start at the nape of the are designed to be toward the ear. Limited Five-Year Warranty product was used in accordance with the instruction booklet (included with the rights, and you may also have other Call 800-736-4648 in the U.S. or 1. Make sure your hair clipper is 1. Select the trimming guide that Even Cut Mustaches neck flicking the clipper away from Move the clipper from the back of Spectrum Brands, Inc. warrants this product against any defects that are due to product at the time of purchase). rights that vary from state to state. 800-268-0425 in Canada. Or visit running smoothly, with a slight matches the length you want Allow the clipper to cut through the 1. Comb your beard in the direction the head just below the previously the head to the front. This creates a faulty material or workmanship for a five-year period from the original date of 4. Returns should be mailed prepaid (no collect returns accepted) to: Some states do not allow the exclu- www.RemingtonProducts.com vibration. the hair to be after the cut. The hair without moving it too quickly. cut hair. it grows. Moving the clipper too quickly may tapered effect around the ears and consumer purchase. This warranty does not include damage to the product Remington 60-Day MBG sion or limitation of incidental or con- 2. Place a cape or towel around the trimming guides are numbered 2. Determine the length you want result in discomfort or an inadequate 3. To cut back of the neck. resulting from accident or misuse. 507 Stokely Drive, Box 1 sequential damages, or limitations on ® Registered Trademark Spectrum neck of the person whose hair is and marked with specific lengths. the beard to remain, and fit the cut. Use short strokes when cutting, hair at 5. To complete the cut, inspect hair If the product should become defective within the warranty period, we will DeForest, WI 53532 how long an implied warranty lasts, Brands, Inc.