Enhanced Oil Recovery Delivery Service Autonomous | Modular | Low-Cost

Total Page：16

File Type：pdf, Size：1020Kb

Enhanced Oil Recovery Delivery Service Autonomous | Modular | Low-Cost EOR ETC developed with EOR experts a EOR ETC reduces cost through co-injection of multipurpose delivery instrument to solve the produced gas (lean or rich) and provided water problems limiting Huff & Puff gas injection EOR. and field supply. Co-injection of surfactant With meager 6-10% recovery in unconventional laden water and natural gas, or CO2, reservoirs, improving recovery offers a massive alters matrix wettability and improves prize. EOR ETC has changed the game, reducing mobility control Our technology cuts project time from years to months, forecast reservoir re-pressurization time nearly in half unconventional well planning pilot program. EOR and releases more oil from the shale matrix. EOR ETC leveraged a small footprint and transportable ETC’s strong low-risk value proposition for modern pumping system with a unique companies facing declining production in existing automated feature. Available for both pilot and wells and critical decision making dilemmas EOR full-field scalable turn-key service. ETC is the best way to recover and book reserves. Executive Management Team with Deep Experience in EOR, Multiphase Flow, Capital Projects, Technology Deployment and Business Development Dr. Stuart L Scott Brian Schwanitz Inventor | Co-Founder President | Co-Founder • 30 years experience in oil& gas • 42 years experience in oil & gas • Ex Shell global principal industry technical expert for artificial lift • Welltec Fellow, SPE Distinguished • Former Professor Petroleum Lecturer, Annual Awards winner Engineering at Texas A&M U. • Ex Schlumberger EOR specialist and LSU Amanda Scott Charles Zimmermann VP | Co-Founder Advisor | Co-Founder • 7 years experience in oil & gas • 20 years experience in oil& gas • Rice certificate in leadership & • Ex BP vice president of decision making upstream projects • VP Rio Tinto Brandon Moore Mick Fetkovich Projects & Engineering | Petroleum Advisor | Reservoir Engineering Engineer • 30 years experience in oil & gas • B.S. in petroleum engineering • Ex ConocoPhillips Principal from the U. of Houston Reservoir Engineer Dr. David Schechter Dr. Cem Sarica Advisor | EOR Specialist Advisor | Multiphase Flow • 30 years experience in oil & gas • 30 years experience in oil & gas • Professor of petroleum industry engineering at Texas A&M U. • Professor of petroleum • Director of EOR Center at Texas engineering at Tulsa University A&M U. • Director of Tulsa U. Fluid Flow Projects (TUFFP) 1707 1/2 Post Oak Blvd, PMB 404 Houston, TX 77056 www.petroleumetc.com.

Copy Link

Recommended publications

Statoil ASA Statoil Petroleum AS
Offering Circular A9.4.1.1 Statoil ASA (incorporated with limited liability in the Kingdom of Norway) Notes issued under the programme may be unconditionally and irrevocably guaranteed by Statoil Petroleum AS (incorporated with limited liability in the Kingdom of Norway) €20,000,000,000 Euro Medium Term Note Programme On 21 March 1997, Statoil ASA (the Issuer) entered into a Euro Medium Term Note Programme (the Programme) and issued an Offering Circular on that date describing the Programme. The Programme has been subsequently amended and updated. This Offering Circular supersedes any previous dated offering circulars. Any Notes (as defined below) issued under the Programme on or after the date of this Offering Circular are issued subject to the provisions described herein. This does not affect any Notes issued prior to the date hereof. Under this Programme, Statoil ASA may from time to time issue notes (the Notes) denominated in any currency agreed between the Issuer and the relevant Dealer (as defined below). The Notes may be issued in bearer form or in uncertificated book entry form (VPS Notes) settled through the Norwegian Central Securities Depositary, Verdipapirsentralen ASA (the VPS). The maximum aggregate nominal amount of all Notes from time to time outstanding will not exceed €20,000,000,000 (or its equivalent in other currencies calculated as described herein). The payments of all amounts due in respect of the Notes issued by the Issuer may be unconditionally and irrevocably guaranteed by Statoil A6.1 Petroleum AS (the Guarantor). The Notes may be issued on a continuing basis to one or more of the Dealers specified on page 6 and any additional Dealer appointed under the Programme from time to time, which appointment may be for a specific issue or on an ongoing basis (each a Dealer and together the Dealers).
[Show full text]
Deep Borehole Placement of Radioactive Wastes a Feasibility Study
DEEP BOREHOLE PLACEMENT OF RADIOACTIVE WASTES A FEASIBILITY STUDY Bernt S. Aadnøy & Maurice B. Dusseault Executive Summary Deep Borehole Placement (DBP) of modest amounts of high-level radioactive wastes from a research reactor is a viable option for Norway. The proposed approach is an array of large- diameter (600-750 mm) boreholes drilled at a slight inclination, 10° from vertical and outward from a central surface working site, to space 400-600 mm diameter waste canisters far apart to avoid any interactions such as significant thermal impacts on the rock mass. We believe a depth of 1 km, with waste canisters limited to the bottom 200-300 m, will provide adequate security and isolation indefinitely, provided the site is fully qualified and meets a set of geological and social criteria that will be more clearly defined during planning. The DBP design is flexible and modular: holes can be deeper, more or less widely spaced, at lesser inclinations, and so on. This modularity and flexibility allow the principles of Adaptive Management to be used throughout the site selection, development, and isolation process to achieve the desired goals. A DBP repository will be in a highly competent, low-porosity and low-permeability rock mass such as a granitoid body (crystalline rock), a dense non-reactive shale (chloritic or illitic), or a tight sandstone. The rock matrix should be close to impermeable, and the natural fractures and bedding planes tight and widely spaced. For boreholes, we recommend avoiding any substance of questionable long-term geochemical stability; hence, we recommend that surface casings (to 200 m) be reinforced polymer rather than steel, and that the casing is sustained in the rock mass with an agent other than standard cement.
[Show full text]
Petroleum Engineering (PETE) | 1
Petroleum Engineering (PETE) | 1 PETE 3307 Reservoir Engineering I PETROLEUM ENGINEERING Fundamental properties of reservoir formations and fluids including reservoir volumetric, reservoir statics and dynamics. Analysis of Darcy's (PETE) law and the mechanics of single and multiphase fluid flow through reservoir rock, capillary phenomena, material balance, and reservoir drive PETE 3101 Drilling Engineering I Lab mechanisms. Preparation, testing and control of rotary drilling fluid systems. API Prerequisites: PETE 3310 and PETE 3311 recommended diagnostic testing of drilling fluids for measuring the PETE 3310 Res Rock & Fluid Properties physical properties of drilling fluids, cements and additives. A laboratory Introduction to basic reservoir rock and fluid properties and the study of the functions and applications of drilling and well completion interaction between rocks and fluids in a reservoir. The course is divided fluids. Learning the rig floor simulator for drilling operations that virtually into three sections: rock properties, rock and fluid properties (interaction resembles the drilling and well control exercises. between rock and fluids), and fluid properties. The rock properties Corequisites: PETE 3301 introduce the concepts of, Lithology of Reservoirs, Porosity and PETE 3110 Res Rock & Fluid Propert Lab Permeability of Rocks, Darcy's Law, and Distribution of Rock Properties. Experimental study of oil reservoir rocks and fluids and their interrelation While the Rock and Fluid Properties Section covers the concepts of, applied
[Show full text]
New Petrophysical Magnetic Methods MACC and MAFM in Permeability
Geophysical Research Abstracts Vol. 14, EGU2012-13161, 2012 EGU General Assembly 2012 © Author(s) 2012 New petrophysical magnetic methods MACC and MAFM in permeability characterisation of petroleum reservoir rock cleaning, flooding modelling and determination of fines migration in formation damage O. P. Ivakhnenko Department of Petroleum Engineering, Kazakh-British Technical University, 59 Tolebi Str. Almaty, Kazakhstan ([email protected]; [email protected]/Fax: +7 727 2720487) Potential applications of magnetic techniques and methods in petroleum engineering and petrophysics (Ivakhnenko, 1999, 2006; Ivakhnenko & Potter, 2004) reveal their vast advantages for the petroleum reser- voir characterisation and formation evaluation. In this work author proposes for the first time developed systematic methods of the Magnetic Analysis of Core Cleaning (MACC) and Magnetic Analysis of Fines Migration (MAFM) for characterisation of reservoir core cleaning and modelling estimations of fines migration for the petroleum reservoir formations. Using example of the one oil field we demonstrate results in application of these methods on the reservoir samples. Petroleum reservoir cores samples have been collected within reservoir using routine technique of reservoir sampling and preservation for PVT analysis. Immediately before the MACC and MAFM studies samples have been exposed to atmospheric air for a few days. The selected samples have been in detailed way characterised after fluid cleaning and core flooding by their mineralogical compositions and petrophysical parameters. Mineralogical composition has been estimated utilizing XRD techniques. The petrophysical parameters, such as permeability and porosity have been measured on the basis of total core analysis. The results demonstrate effectiveness and importance of the MACC and MAFM methods for the routine core analysis (RCAL) and the special core analysis (SCAL) in the reservoir characterisation, core flooding and formation damage analysis.
[Show full text]
Applied Earth Sciences Natural Resources from the Earth, Ranging from Engineers Know Where Those Resources Can Be Found Raw Materials to Energy
complement your academic studies, you will have the opportunity to work intensively with TU Delft’s partners in industry. For example, TU Delft is a participant in ISAPP (Integrated System Approach Petroleum Production), a large collaborative project involving TU Delft, Shell and TNO established for the purpose of boosting oil production by improving the flow of oil and water in oil reservoirs, and CATO, a consortium doing research on the collection, transport and storage of CO2. Managing the Earth’s resources for today and tomorrow Programme tracks • Petroleum Engineering and Geosciences covers both the technologies involved in extracting petroleum from the Earth, and the tools for assessing hydrocarbon reservoirs to gain an MSc Programme understanding of their potential. The track is divided into two specialisations: Petroleum Engineering covers all upstream Applied Earth aspects from reservoir description and drilling techniques to field management and project Sciences economics. Reservoir Geology covers the use of modern measurement and computational methods to obtain a quantitative understanding of hydrocarbon reservoirs. • Applied Geophysics is a joint degree track offered collaboratively by TU Delft, ETH Zürich and RWTH Aachen University. It trains students in geophysical aspects of environmental and engineering studies and in the exploration, exploitation and management of hydrocarbon and geothermal energy. Disciplines covered include acoustic and electromagnetic wave theory, seismic data acquisition, imaging and interpretation, borehole logging, rock-fluid interaction and petroleum geology. Everything we build and use on the surface of our • Resource Engineering covers the extraction of planet comes from the Earth. Applied Earth Sciences natural resources from the Earth, ranging from engineers know where those resources can be found raw materials to energy.
[Show full text]
Best Research Support and Anti-Plagiarism Services and Training
CleanScript Group – best research support and anti-plagiarism services and training List of oil field acronyms The oil and gas industry uses many jargons, acronyms and abbreviations. Obviously, this list is not anywhere near exhaustive or definitive, but this should be the most comprehensive list anywhere. Mostly coming from user contributions, it is contextual and is meant for indicative purposes only. It should not be relied upon for anything but general information. # 2D - Two dimensional (geophysics) 2P - Proved and Probable Reserves 3C - Three components seismic acquisition (x,y and z) 3D - Three dimensional (geophysics) 3DATW - 3 Dimension All The Way 3P - Proved, Probable and Possible Reserves 4D - Multiple Three dimensional's overlapping each other (geophysics) 7P - Prior Preparation and Precaution Prevents Piss Poor Performance, also Prior Proper Planning Prevents Piss Poor Performance A A&D - Acquisition & Divestment AADE - American Association of Drilling Engineers [1] AAPG - American Association of Petroleum Geologists[2] AAODC - American Association of Oilwell Drilling Contractors (obsolete; superseded by IADC) AAR - After Action Review (What went right/wrong, dif next time) AAV - Annulus Access Valve ABAN - Abandonment, (also as AB) ABCM - Activity Based Costing Model AbEx - Abandonment Expense ACHE - Air Cooled Heat Exchanger ACOU - Acoustic ACQ - Annual Contract Quantity (in reference to gas sales) ACQU - Acquisition Log ACV - Approved/Authorized Contract Value AD - Assistant Driller ADE - Asphaltene
[Show full text]
Elasto-Plastic Deformation and Flow Analysis in Oil
ELASTO-PLASTIC DEFORMATION AND FLOW ANALYSIS IN OIL SAND MASSES by THILLAIKANAGASABAI SRITHAR B. Sc (Engineering), University of Peradeniya, Sri Lanka, 1985 M. A. Sc. (Civil Engineering) University of British Columbia, 1989 A THESIS SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF DOCTOR OF PHILOSOPHY in THE FACULTY OF GRADUATE STUDIES Department of CIVIL ENGINEERING We accept this thesis as conforming to the required standard THE UNIVERSITY OF BRITISH COLUMBIA April, 1994 © THILLAIKANAGASABAI SRITHAR, 1994 _______________________ In . presenting this thesis in partial fulfilment of the requirements for an advanced degree at the University of British Columbia, I agree that the Library shall make it freely available for reference and study. I further agree that permission for extensive copying of this thesis for scholarly purposes may be granted by the head of my department or by his or her representatives. It is understood that copying or publication of this thesis for financial gain shall not be allowed without my written permission. (Signature) Department of Civil Engineering The University of British Columbia Vancouver, Canada Date - A?R L 9 L DE-6 (2188) Abstract Prediction of stresses, deformations and fluid flow in oil sand layers are important in the design of an oil recovery process. In this study, an analytical formulation is developed to predict these responses, and implemented in both 2-dimensional and 3-dimensional finite element programs. Modelling of the deformation behaviour of the oil sand skeleton and modelling of the three-phase pore fluid behaviour are the key issues in developing the analytical procedure. The dilative nature of the dense oil sand matrix, stress paths that involve decrease in mean normal stress under constant shear stress, and loading-unloading sequences are some of the important aspects to be considered in modelling the stress-strain behaviour of the sand skeleton.
[Show full text]
Techniques for Modeling Complex Reservoirs and Advanced Wells
TECHNIQUES FOR MODELING COMPLEX RESERVOIRS AND ADVANCED WELLS A DISSERTATION SUBMITTED TO THE DEPARTMENT OF ENERGY RESOURCES ENGINEERING AND THE COMMITTEE ON GRADUATE STUDIES OF STANFORD UNIVERSITY IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF DOCTOR OF PHILOSOPHY Yuanlin Jiang December 2007 °c Copyright by Yuanlin Jiang 2008 All Rights Reserved ii I certify that I have read this dissertation and that, in my opinion, it is fully adequate in scope and quality as a dissertation for the degree of Doctor of Philosophy. Dr. Hamdi Tchelepi Principal Advisor I certify that I have read this dissertation and that, in my opinion, it is fully adequate in scope and quality as a dissertation for the degree of Doctor of Philosophy. Dr. Khalid Aziz Advisor I certify that I have read this dissertation and that, in my opinion, it is fully adequate in scope and quality as a dissertation for the degree of Doctor of Philosophy. Dr. Roland Horne Approved for the University Committee on Graduate Studies. iii Abstract The development of a general-purpose reservoir simulation framework for coupled systems of unstructured reservoir models and advanced wells is the subject of this dissertation. Stanford's General Purpose Research Simulator (GPRS) serves as the base for the new framework. In this work, we made signi¯cant contributions to GPRS, in terms of architectural design, extensibility, computational e±ciency, and new advanced well modeling capabilities. We designed and implemented a new architectural framework, in which the fa- cilities (man-made) model is treated as a separate component and promoted to the same level as the reservoir (natural) component.
[Show full text]
Model Petroleum Engineering Curriculum
The SPE Model Petroleum Engineering Curriculum – What it is and what it isn’t The model petroleum engineering curriculum is intended as an aid to universities worldwide that want to start new petroleum engineering programs. It is not intended to be a “standard” curriculum, in that no petroleum engineering curriculum would have all of the course listed here. Any petroleum engineering curriculum should educate students in fundamental mathematics and science, humanities and liberal arts, engineering science, and the foundational course in petroleum engineering. Most curricula will include some more specialized petroleum engineering courses, like those listed in the model curriculum as petroleum engineering electives. No Bachelor’s of Science level degree program could include all of the courses shown in the elective list. The SPE model curriculum includes all of the educational areas needed to create a specific petroleum engineering curriculum. Every petroleum engineering curriculum in the world is unique, none are exactly the same. Many countries or regions have course requirements that do not appear anywhere else in the world. In the United States, there are significant variations in curricula, with some programs having emphases on particular areas of petroleum engineering that are different from other programs. This model curriculum can be used to construct a unique degree program for new programs, with the particular courses included based on the particular needs of that university, or that country. Model Petroleum Engineering Curriculum
[Show full text]
Top-Down Intelligent Reservoir Modeling
TOP -DOWN INTELLIGENT RESERVOIR MODELING (TDIRM); A NEW APPROACH IN RESERVOIR MODELING BY INTEGRATING CLASSIC RESERVOIR ENGINEERING WITH ARTIFICIAL INTELLIGENCE & DATA MINING TECHNIQUES ShahabD.Mohaghegh,WestVirginiaUniversity,Morgantown,WV,USA SUMMARY Traditionalreservoirsimulationandmodelingisabottom-upapproach.Itstartswithbuildinga geologicalmodelofthereservoirfollowedbyaddingengineeringfluidflowprinciplestoarrive atadynamicreservoirmodel.Thedynamicreservoirmodeliscalibratedusingtheproduction historyofmultiplewellsandthehistorymatchedmodelisusedtostrategizefielddevelopment inordertoimproverecovery. Top-Down Intelligent Reservoir Modeling approaches the reservoir simulation and modeling fromanoppositeanglebyattemptingtobuildarealization of the reservoir starting with well productionbehavior(history).Theproductionhistoryisaugmentedbycore,log,welltestand seismicdatainordertoincreasetheaccuracyandfinetunetheTop-Downmodel.Themodelis then calibrated (history matched) using the most recent wells as blind dataset. Althoughnotintendedasasubstituteforthetraditionalreservoirsimulationoflarge,complex fields,thisnovelapproachcanbeusedasanalternative(atafractionofthecostandtime)to traditionalreservoirsimulationincaseswhereperformingtraditionalmodelingiscost(andman- power)prohibitive.Incaseswhereaconventionalmodelofareservoiralreadyexists,Top-Down IntelligentReservoirModelingshouldbeconsideredacomplementto,ratherthanacompetition for the traditional technique. It provides an independent look at the data coming from the reservoir/wellsforoptimumdevelopmentstrategyandrecoveryenhancement.
[Show full text]
UNIVERSITY of CALGARY Characterization of Oil Sands
UNIVERSITY OF CALGARY Characterization of Oil Sands Tailings Using Low Field Nuclear Magnetic Resonance (NMR) Technique by Sandra Carolina Motta Cabrera A THESIS SUBMITTED TO THE FACULTY OF GRADUATE STUDIES IN PARTIAL FULFILMENT OF THE REQUIREMENTS FOR THE DEGREE OF MASTER OF SCIENCE DEPARTMENT OF CHEMICAL AND PETROLEUM ENGINEERING CALGARY, ALBERTA SEPTEMBER, 2008 © Sandra Carolina Motta Cabrera 2008 ISBN: 978-0-494-44621-8 Dedication Gracias a ti por prestarme siempre tus maravillosos lentes rosados Gracias a ti por seguir queriendo estar Gracias a ti por estar siempre en mis más lindos recuerdos Gracias a ti por ser mi par mejorado Gracias a ti por mostrarme tu lado amoroso Gracias a ti por enseñarme que siempre puedo aprender Gracias a ti por ser mis hermosas alas Gracias a ti por seguir a mi lado entendiendo amaneceres y atardeceres Abstract The oil sands mining and extraction processes in Canada produce large volumes of tailings that are a mixture of mainly water, clay, sand, chemicals and bitumen. This mixture is transported to tailings ponds, where gravity segregation occurs. During this process, a stable suspension called mature fine tailings (MFT) is formed, which requires many years to fully consolidate. Therefore, land reclamation and water recirculation become significant environmental issues. For this reason, it is important to understand the tailings content and their settling properties. This study uses the low field Nuclear Magnetic Resonance (NMR) technique to estimate the composition of tailings samples, through a bimodal compositional detection method. Tailings settling characteristics were also studied in the absence and presence of the typical chemical substances used in the industry to accelerate settling.
[Show full text]
Introduction to Petroleum Engineering Introduction to Petroleum Engineering
INTRODUCTION To PetrOLEUM ENGINEERING INTRODUCTION TO PETROLEUM ENGINEERING JOHN R. FANCHI and RICHARD L. CHRISTIANSEN Copyright © 2017 by John Wiley & Sons, Inc. All rights reserved Published by John Wiley & Sons, Inc., Hoboken, New Jersey Published simultaneously in Canada No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per‐copy fee to the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, (978) 750‐8400, fax (978) 750‐4470, or on the web at www.copyright.com. Requests to the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, (201) 748‐6011, fax (201) 748‐6008, or online at http://www.wiley.com/go/permissions. Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts in preparing this book, they make no representations or warranties with respect to the accuracy or completeness of the contents of this book and specifically disclaim any implied warranties of merchantability or fitness for a particular purpose. No warranty may be created or extended by sales representatives or written sales materials. The advice and strategies contained herein may not be suitable for your situation. You should consult with a professional where appropriate. Neither the publisher nor author shall be liable for any loss of profit or any other commercial damages, including but not limited to special, incidental, consequential, or other damages.
[Show full text]