Nylon Inserts & All Metal Locknuts

Total Page:16

File Type:pdf, Size:1020Kb

Nylon Inserts & All Metal Locknuts ™ A Division of TRAMEC, LLC. Nylon Inserts & All Metal Locknuts The Standard of Excellence since 1948 ™ Continental-Aero is the premier stocking master distributor of nylon insert locknuts, all-metal locknuts, and finished hex nuts, supplying the North American distributor market with superior customer service since 1948. Continental-Aero maintains stocking warehouses in Alsip, Illinois; Harrison, New Jersey; Mississauga, Ontario, Canada; Iola, Kansas; Arlington, Texas and Chino, California and a sales office in Buffalo Grove, Illinois. Continental-Aero is well known for its distinguishable press-closed nylon lock nuts and its trademarked Royal Purple Tork-Lok™ nylon insert. The Standard of Excellence since 1948 NM Series NE8 Series (N 1610) Purple Tork Lok Nylon Insert Locknut Purple Tork Lok Nylon Insert Locknut Machine Screw Pattern, Standard Height Light Hex, Grade 8 (DN or 6D) Machine screw threaded applications High tensile Grade 8 applications NTM Series NTE8 Series (NTE 1610) Purple Tork Lok Nylon Insert Locknut Purple Tork Lok Nylon Insert Locknut Machine Screw Pattern, Light Hex, Thin Height Grade 8 Thin (Jam) Height (DN or 6D) Machine screw threaded applications where High tensile Grade 8 applications where thin thin nut is required height is required NU8 Series (NU 1610) NE Series Purple Tork Lok Nylon Insert Locknut Purple Tork Lok Nylon Insert Locknut Heavy Hex, Full Height Grade 8 Light Hex, Standard Height (DN or 6D) For fractional bolt threaded applications Designed for the American Standard Heavy Hex Series for high tensile Grade 8 applications NTU8 Series (NTU 1610) NTE Series Purple Tork Lok Nylon Insert Locknut Purple Tork Lok Nylon Insert Locknut Heavy Hex, Thin Height Grade 8 Light Hex, Thin (Jam) Height (DN or 6D) For fractional bolt threaded applications where Designed for the American Standard Thin thin nut is required Heavy Hex Series for high tensile Grade 8 applications Metric Series NU Series (DIN 6924) (DIN 6926) Purple Tork Lok Nylon Insert Locknut Purple Tork Lok Nylon Insert Locknut Heavy Hex, Full Height Metric Hex Nylon Insert Locknuts Designed for the American Standard Heavy DIN 6924 (ISO 7040) Class 8 & 10, Metric Hex Hex Series Nylon Insert Flange Nuts DIN 6926 (ISO 7043) Class 8 & 10 NTU Series Purple Tork Lok Nylon Insert Locknut M2DN Series (DIN 982) Metric Nylon Insert Locknuts to DIN 982 Heavy Hex, Thin Height Steel Class 6, 8 & 10 Stainless Steel A2 (18/8) Designed for the American Standard Thin & A4 (316) Heavy Hex Series NE5 Series Purple Tork Lok Nylon Insert Locknut M5DN Series (DIN 985) Light Hex, Standard Height Purple Tork Lok Nylon Insert Locknut For fractional bolt threaded applications Metric Nylon Insert Locknuts to DIN 985 requiring Grade 5 material proof loads & Steel Class 6, 8 & 10 Stainless Steel A2 (18/8) clamp loads. Marked with 3 dots per IFI & A4 (316) 100/107. Nylon Inserts & All Metal Locknuts NFLG Series CFLF/CFLG Series Purple Tork Lok Nylon Insert Locknut All Metal Flange Top Locknut Hex Nylon Insert Flange Locknuts All Metal Flange Top Locknut Wider bearing diameter to cover the mating Grade G CFLG surface when seated, while still offering a Prevailing Torque Type Steel Hex Flange locking element Top Locknut NFLG8 Series Purple Tork Lok Nylon Insert Locknut Hex Nylon Insert Flange CLC Series All Metal Lock nut Locknuts Grade 8 All Metal, Grade C Toplock Grade 8 applications for wider bearing CLC Series Automation Style Locknut, diameter to cover the mating surface Prevailing Torque Type Heat Treated when seated, while still offering a locking element KL Series All-Metal Assembly SL Series Hex Nut/Tooth Washer Assembly All-Metal Locknut Lock Nut Serrated Flange Hex Locknut Steel & Stainless Steel A2 (18/8) Carbon Steel, Case Hardened, Inch & Metric Whiz-Lock Series NTU8 Series (NTU 1610) WC Series WLT, WLB, WLF, WLFM All Metal Locknut Purple Tork Lok Nylon Insert Locknut Purple Tork Lok Nylon Insert Locknut Heavy Hex, Thin Height Grade 8 Whiz-Lock Nut Locking Wing Nuts Has a series of spiraling serrations, one piece, (DN or 6D) with Nylon Insert Designed for the American Standard Thin all metal case hardened teeth (Rockwell C37); Locking device with nylon insert that may Whiz-Lock Nut, Whiz-Lock Large Flange Nut, Heavy Hex Series for high tensile Grade 8 be installed and removed by hand applications Whiz-Lock Flange Nut, Whiz-Lock Metric Flange Nut NFH Series TL Series Finished Hex Nut All-Metal Locknut Finished Hex Nut All Metal Reversible Locknut Grade 5, 8 Steel & 18-8 Stainless Steel, Plain, Finished Hex Nut Pattern with Reversible Black Oxide, Zinc/Yellow, Clear Zinc & other Locking feature on center Hex Flats finishes are available (Centerlock) N1268 Series (N1260) Purple Tork Lok Nylon Insert Locknut High Hex, Grade 8 (DN or 6D) TWL Series Designed for applications that require pre- All-Metal Locknut stressing high strength bolts to their elastic Twin Serrated Hex Locknut limits providing extra thread length and hex Carbon Steel-Case Hardened height Special Requests Welcome Continental-Aero has been famous for service and selection. We stock one of the largest locknut inventories in the industry and offer our branded Purple Nylon Tork Locknuts, All Metal Locknuts, Grade 5 & Grade 8 Finished Hex Nuts. If you don’t see what you need, your Continental-Aero Sales Representitive welcomes special requests. Continental-Aero.com Toll Free: 800-631-0468 2H Nut NMRH Series Hex Nut, heavy, Medium Carbon Steel, CFLF/CFLG Series All Metal Flange Top Locknut Quenched & Tempered Grade 2H (NM 107, 408, 2234) Purple Tork Lok Nylon Insert Locknut All Metal Flange Top Locknut Property Class 2H, Thread direction right hand, Rockwell Hardness C24 to C38, Application Reduced Hex Nylon Insert Locknut Grade G CFLG for use with Structural Bolts, Meets/Exceeds Across flats hexagons are undersized nut Prevailing Torque Type Steel Hex Flange ASTM A194 Extra wide, Extra thick nuts standards. Used where wrench clearances Top Locknut have increased bearing surface and thread are limited engagement for improved hold. Axilok NC Series CLC Series Purple Tork Lok Nylon Insert Locknut All Metal Lock nut Axilok Unitized Wheel Bearing Nut Clinch Hex Nut Nylon Insert Locknut All Metal, Grade C Toplock System Captive self-locking installed in aluminum or CLC Series Automation Style Locknut, Unitized part consisting of nut body, two soft sheet steel Prevailing Torque Type Heat Treated locking clips and retainer cage, results in longer bearing, wheel, and tire life Securex (Wheel Nut) Through-hardened carbon steel Wheel Nut ND Series Securex: The Original Two-Piece Nut for Purple Tork Lok Nylon Insert Locknut SL Series Hub Piloted Wheels All-Metal Locknut The nut body is made of through-hardened Spline Nylon Insert Locknut Serrated Flange Hex Locknut carbon steel and each free spinning washer Self-wrenching nut for either blind hole Carbon Steel, Case Hardened, Inch & Metric is made of through-hardened and tempered application or where maintenance can be chrome-moly steel meeting SAE J1965 facilitated by the use of a captive fastener requirement for torque tension Whiz-Lock Series Uni-Torque Flange WLT, WLB, WLF, WLFM All Metal Locknut All Metal Flange Top Locknut, SFFU, SFGU NCFMA Series Whiz-Lock Nut Purple Tork Lok Nylon Insert Locknut Uni-Torque All Metal Flange Top Locknut Has a series of spiraling serrations, one piece, Miniature Clinch Flush Mounting Nylon Grade F & G Top Lock Flange Nuts all metal case hardened teeth (Rockwell C37); Insert Locknut The Lower height of the nut makes it a Whiz-Lock Nut, Whiz-Lock Large Flange Nut, Installation in thin aluminum, soft steel sheets great candidate for light duty. Grade F & G Whiz-Lock Flange Nut, Whiz-Lock Metric or plates having small mounting areas Chamfered Uni-Torque Flange Top Locknuts Flange Nut The pronounced chamfer at the top of the nut makes it a great candidate for severe duty TL Series Uni-Torque UTC Series NKCFM Series All-Metal Locknut All Metal Locknut Purple Tork Lok Nylon Insert Locknut All Metal Reversible Locknut UTC Uni-Torque Grade C All Metal Toplock Miniature Clinch Flush Mounting Nylon Finished Hex Nut Pattern with Reversible The horizontally opposed deflections at the top of the nut create an oval Cap Locknut Locking feature on center Hex Flats contact surface that “flexes” with vibration. It always returns to an at-rest Nylon cap covers protruding threads in an (Centerlock) position that maintains clamp load. The pronounced chamfer at the top NCFMA application of the nut makes it a great candidate for automation. 1660 Series Purple Tork Lok Nylon Insert Locknut NKM/NKTM Series TWL Series Miniature Hex Nylon Insert Locknut Hex Nylon Cap Locknuts All-Metal Locknut Radar, radio equipment, electronics, Used in applications for reasons for safety Twin Serrated Hex Locknut computers where design requires or appearance to cover exposed bolt ends Carbon Steel-Case Hardened miniaturization & reduced installation clearance LH1660 All-Metal Miniature Hex Locknut NKE/NKTE Series Where design requires miniaturization and Hex Nylon Cap Locknuts reduced installation clearance where heat is Used in applications for reasons of safety greater than 250˚F or subject to an acidic or appearance to cover exposed bolt ends. application Nylon Inserts & All Metal Locknuts Continental-Aero provides Integrated Supply Chain Management Systems that deliver on and off the balance sheet benefits. Continental-Aero partners with our clients to deliver strategic solutions. Make Continental-Aero part of your Supply Chain • Widest & Deepest Inventory • Single Size Poly Bagging • Branded Products at Competitive Pricing • Single Size Boxing • Same Day Shipping • Kitting Program • Vendor Managed Inventory Systems • Supplier Quality Assurance Enrichment Program • Customized Reporting • Lot Control and Full Traceability • Stock and Release Programs • Chemical and Physical Certification Available • Consignment Programs • Plating Specialists • Blanket Orders, Price Containment • ROHS and REACH Compliant • Direct Shipments from our Mills • Credit Card Acceptance • Drop Shipments to Your Customers • Mercury Free Environment Compliant • Customer Specific Labeling and Bar Coding • ISO 9001 Certified A Division of TRAMEC, LLC.
Recommended publications
  • Fastener Identification Guide • 4.13 KM • Printed in the USA
    HEAD STYLES Hex Cap Screw Bugle Hex cap screws feature a washer face on the Button Washer bearing surface, a chamfered point, and tighter body tolerances than hex bolts. Pan Binding Undercut Hex Bolt Similar to hex cap screw, hex bolts do not require a washer face or a pointed end and have a greater tolerance range in the body. Round Head Fillister Socket Head Cap Screw Socket heads feature an internal hexagonal drive DRIVES socket and close tolerances for precision assembly. Flat 82° Cross Recess Button Head Socket Cap Screw Type I FASTENER (Phillips) Button heads feature a dome shaped head, though Flat 100° this feature reduces the tensile capacity. Cross Recess Flat Head Socket Cap Screw Type IA Flat heads feature an 82° countersunk head for Flat Undercut (Pozidriv®) IDENTIFICATION flush connections. Like the button heads, this feature reduces the tensile capacity. Cross Recess Type II (Frearson) Low Head Socket Cap Screw Indented Hex Low heads are similar to standard socket heads, but with a shorter head for applications where clearance Cross Recess Square GUIDE is an issue. This head configuration also reduces the Combo strength capacity. Indented Hex Washer (Quadrex®) NUTS Carriage Bolt A round head bolt with a square neck under the Slotted head. These must be tightened with a nut. Serrated Hex Finished Hex Nuts: Hex Coupling Nuts: Washer Hexagonal shaped nuts with internal screw Designed to join two externally threaded Plow Bolt threads. Finished hex nuts are one of the most objects, usually threaded rod, together. Combination Similar to a carriage bolt, these have a flat head common nuts used.
    [Show full text]
  • Threaded Fasteners
    Threaded Fasteners Introduction If you are designing and building a Formula SAE vehicle, threaded fasteners will likely be used to join the various components and systems together and allow the vehicle to function as a unified machine. The reliability of your vehicle is key to realize your potential at the competition. Even though threaded fasteners have been in use for hundreds of years and are in products that we use every day, their performance is dependent on a wide range of factors. This chapter covers some of the main factors that can influence reliability and is intended as an aid in joint design, fastener selection, and installation. The first portion of this chapter covers several design and installation factors that can work together to improve the reliability of your vehicle’s bolted joints. These topics include, the importance of generating and maintaining clamp load, and how clamp load, along with joint stiffness, can work together to prevent self-loosening and improve fatigue performance. The second portion of this chapter reviews how installation method and torque are related to clamp load, and also includes a comparison between common fastener types to aid in selection. The chapter concludes with a short tutorial showing how to obtain Mil Spec information on fasteners and similar hardware. Disclaimer – Multiple factors on each component in a bolted joint affect its performance. Additionally, service requirements for every joint differ. Each joint must be evaluated and tested for its ability to perform the desired function. The information in this chapter provides general background and does not represent how a specific design or piece of hardware will perform.
    [Show full text]
  • Engineered Domestic Lock Nuts
    LOCK NUTS Engineered Domestic Lock Nuts Principal Products: Markets Collarlok® Nuts Aerospace ESlok® Nuts Automotive Brake, Exhaust, Fuel, Interior Trunk, Fuel, Strux® Nuts Power Steering, Power Train, Suspension Whiz Lock® Nuts Agriculture Wheel nuts Sickle Bar Guards, Wheel Fastening Nut & bracket assemblies Truck and Trailer Nut & washer assemblies Bearing Retention, Wheel Fastening Nylon nuts Industrial Fasteners used for assemblies All metal lock nuts Lawn and Garden Lawn Tractor Components, Shift Linkages Collarlok® The Collarlok prevailing torque hex or flange nut design offers the reuse characteristics of the proven ESNA insert type. A red nylon collar bonded into the head of the nut provides a prevailing torque type nut with the advantage of high speed assembly using automatic assembly tools. The non-galling collar offers superior vibration performance in standard or metric threads. ESlok® The ESlok red nylon locking patch type fastener has a controlled amount of red nylon permanently bonded to the threads of the standard hex nut and to the center threads of the nut permitting either end entry of the bolt for automatic machine assembly. Parts are easily removed with a wrench and may be reused up to five times. No metal is removed or distorted insuring the tensile strength and non-galling characteristics of an ESlok self-locking fastener. 2369 Schuetz Road Saint Louis, Missouri 63146 Phone 314/ 567-8585 Fax 314/567-7334 LOCK NUTS Strux® Nuts The Strux nuts system provides a completely automated, accurate and reliable method for installing fasteners, as well as eliminating expensive manual secondary operations and increasing productivity. The result is a precisely located threaded hole that becomes an integral part of the steel plate.
    [Show full text]
  • Self-Clinching Nuts Install Permanently in Aluminum, Steel Or Stainless Steel Sheets
    PEM® brand self-clinching nuts install permanently in aluminum, steel or stainless steel sheets. CL™ SELF-CLINCHING NUTS SELF-CLINCHING NUTS Self-clinching nuts are installed by placing them in properly sized holes in sheets and applying a parallel squeezing force to the head of the nut. The sheet metal surrounding the head cold flows into an undercut thereby making the fastener an integral part of the sheet. A serrated clinching ring prevents the fastener from rotating after installation. S™/SS™/CLA™/CLS™/CLSS™ nuts H™ (non-locking) and HNL™ (locking) provide load-bearing threads in thin nuts have threads that provide high sheets with high pushout and torque-out pushout and torque-out resistance - resistance - PAGES 4 and 5 PAGE 8 SP™, PEM 300® nuts provide strong SH™ hard panel nuts install into thin, load-bearing threads in stainless steel harder, high strength steel materials - sheets as thin as .030”/0.8 mm - PAGE 8 PAGES 4 and 5 SMPS™/SMPP™ nuts are for thinner PEM RT® free-running locknuts are sheet/close-to-edge applications - free-running until clamp load is induced. A PAGE 9 modified thread angle on the loaded flank provides the vibration resistant locking Material and finish specifications - PAGE 9 feature- PAGE 6 SL™ self-locking nuts are designed with Installation - PAGES 10 and 11 a unique and economical TRI-DENT® locking feature, meeting 3 cycle locking Performance data - PAGES 12 - 15 performance requirements - PAGE 7 Many PEM self-clinching nuts in this bulletin are dimensionally equivalent to nuts manufactured to NASM45938/1 specifications. Consult our Marketing department for a complete Military Specifications and National Aerospace Standards guide (Bulletin NASM) on our website.
    [Show full text]
  • Fastener Guide
    Experts in supplying Vendor Managed fasteners and industrial Inventory Programs products to manufacturers and sub-contract On-Site Parts assemblers. Kitting Department 763.535.0400 763.535.0400 Table of Contents Standard Fasteners.................................................................. 3 Hex Bolt Sizes and Thread Pitches Size Chart.............................................................. 4 Standard US Machine Screw Size Chart....................................................................... 7 Sheet Metal Screw Size Chart....................................................................................... 8 Shoulder Bolt Size Chart................................................................................................ 9 Socket Button Head Size Chart.................................................................................... 11 Socket Cap Size Chart................................................................................................. 12 Socket Flat Head Size Chart........................................................................................ 15 US Nuts Size Chart...................................................................................................... 17 SAE Flat Washer Size Chart........................................................................................ 20 USS Flat Washer Size Chart........................................................................................ 21 Screw Eye Size Chart.................................................................................................
    [Show full text]
  • Onshape: Nut and Bolt Tutorial By: Matthew Jourden Brighton High School Brighton, MI
    OnShape: Nut and Bolt Tutorial By: Matthew Jourden Brighton High School Brighton, MI Objective: Design a Commercially Off Shelf (COTs) Nut and Bolt with a detailed thread. COTs Parts are considered to be standardized parts. Parts like nuts, bolts, screws, washers, cotter pins, woodruff keys, etc. are standardized based on one measurement. An engineering can gather the necessary resources from a variety of manuals like Machinery Handbook, ANSI or ISO manuals or Appendix on a Engineering Textbook (see below). The various measurements of fasteners will typically be a factor of the Major Diameter of the Thread. Utilizing reference charts (see below) will save the engineer time in having to calculate out the various measurements of a fastener. Thread Representation Parts to a Thread Thread Dimension Charts: Nut and Bolt Sizes Major Diameter 1. Navigate to brightonk12.onshape.com > Create a New Document > Rename Tutorial Nut and Bolt 2. Bolt Creation: ½-13UNC-2B a. Rename Part Studio 1 > Bolt: Detailed b. Bolt Body i. Select Sketch > Rename Sketch to Bolt Body > Select Top Workplane (Datum) > Draw the following circle > Green Check > Select Extrude Icon > Rename Bolt Length > Extrude Length 2 > Green Check to Accept c. Chamfer: Chamfers are used at the end of a fastener or top of a bolt ahead to make it easier for alignment into the mating feature (i.e. the bolt shaft into the threaded hole or align the sockets wrench) i. Select Chamfer Tool > Select the edge of the lower circle (bottom edge of part) > Set Value at .0625 > Green Check to Accept d. Bolt Hexagonal Head To create the bolt head designer will need to first draw a construction circle that will represent the distance between the corners of a hexagon the then circumscribe a hexagon on the inside of the circle.
    [Show full text]
  • Keeping It Together the Nuts and Bolts of Fasteners
    KEEPING IT TOGETHER THE NUTS AND BOLTS OF FASTENERS Presented by Jim Rowe October 2011 We take fasteners and the complex system we have for identifying them by type and usage for granted. Here is some information that may help you in choosing the proper fastener for all your repair/replacement needs. Starting at the beginning, the invention of the screw thread is attributed to Archimedes in the 3rd century BC. The Archimedes Screw consisted of a cylinder with an internal continuous screw thread. When the lower end was placed into water and the cylinder rotated, water was raised to a higher level. The principle was also applied for handling light, loose materials such as grain, sand and ashes. The screws that we have today use the same technique in that a mating threaded component, rather than water, is moved through the cylinder. Sir Joseph Whitworth, a British mechanical engineer, became known for his work on engineering standards. In 1841 he proposed the introduction of standard fastener sizes to the Institution of Civil Engineers. These comprised a universal set of specifications for the angle and pitch of screw threads, the Whitworth thread became the first standard thread system in the world. Threaded fasteners are classified by shape, material and finish, which are specified by industry standards. In the United States, the American Society for Testing Materials (ASTM) sets the standards. In Europe, the International Standards Organization (ISO) sets the standards. Types of Fasteners Unified National Coarse Threads (UNC) UNC threads are the most common general fastener thread. Their fit is deeper and more generic than that of a fine thread, allowing for easy removal.
    [Show full text]
  • See Our Product Catalog
    TAbLE OF CONTENTs A WOrD AbOUT LOCKNUT TECHNOLOGY PREVAILING TORQUE – INCH LOCKNUT TECHNOLOGY INC is a manufacturer and Automation Locknuts . .1 processor of all metal prevailing torque locknuts. Our Grade A, B, C technical leadership, coupled with old-fashioned cus- tomer service, allows us to offer our customers unsur- Flange Locknuts passed quality, value and on-time delivery. Grade F . .2-3 All of our locknuts incorporate a precision thread- Grade G . .4 deflection process using state-of-the-art manufacturing equipment. Our product is produced to IFI specifica- Large Flange . .5 tions 100/107. Special low or high torque values can Grade F be produced to customer request. Nylon Insert Flange Locknuts . .5 All of our thread-deflection options can also be installed on your product. Simply send us your free-running nuts Finished Hex, Centerlock . .6 and we will convert them to locknuts. Finished Hex, Toplock . .7 Full Collar/Thin Collar . .8 Grade C A WOrD AbOUT qUALITY Jam, Centerlock, Toplock . .9 LOCKNUT TECHNOLOGY INC is operating under ISO9001-2000 registration to meet world class quality Machine Screw Locknuts . .10 standards. Every part is fully traceable with lot number identification on cartons, packing slips and invoices. Acorn, Centerlock . .10 Our in-house lab is fully equipped to perform any of your certification requirements, including Level III Weldnuts . .11 PPAPs. Quality is not inspected in, but built into every product PREVAILING TORQUE – METRIC using state-of-the-art production equipment. This allows us to offer special high or low torque require- Weldnuts . .11 ments, as well as the fastest turnaround time in the industry.
    [Show full text]
  • Hex Locknuts Heavy Insert Nylon
    1-800-265-8772 [email protected] Spaenaur Home Full Spaenaur Catalog Contact Us Français Slip-on® Locknut Inch Écrous freinés Slip-onMD Pouce C C1018 Cold Rolled Steel, Bright Zinc Pltd. ® Position at any desired location without threading. Slip-on Lock Nut A nut that does not have to be “threaded on.” A must for electricians, mechanical contractors, plumbers, steamfitters, sprinkler installers, general contractors, mining contractors, telecommunication industry, television industry, plant maintenance, original equipment manufacturers—and the list goes on. The Slip-On Lock Nut can be used on pipe racks, clevis hangers, cable trays, all-thread rod, anchor bolts that are rusted or bent, and in high vibratory situations. The list of applications is endless. Saves time Saves money Solves rod and retrofit problems SPAENAUR Thread Width Approx. Recommended Recommended No. Size A\F Thick. Loads Torque 165-199 1/4"-20 UNC 5/8" 3/8" 650 lbs. 6-8 ft. lbs. 165-200 3/8"-16 UNC 7/8" 15/32" 2,000 lbs. 19-25 ft. lbs. 165-201 1/2"-13 UNC 1-1/16" 5/8" 4,000 lbs. 50-60 ft. lbs. 165-W02-1A 5/8"-11 UNC 1-5/16" 13/16" 5,000 lbs. 100-120 ft. lbs. 165-207 3/4"-10 UNC 1-5/8" 1" 8,000 lbs. 180-200 ft. lbs. PKG QTY. 10 MANUFACTURER’S RECOMMENDED INSTALLATION PROCEDURE FOR RIGHT-HAND THREADED SLIP-ON LOCK NUTS STEP 1. Line up slot on both halves and position at desired location, placing threads of rod/bolt all the way back into the base of the slot.
    [Show full text]
  • Barrel Nut (18Pcs) F G H I J
    BOOKCASE ASSEMBLY INSTRUCTIONS We have designed our furniture with you , the customer in mind . Our clear , easy to follow , step by step instructions will guide you through the project from start to finish . Feel confident that this will be a fun and rewarding project . The final product will be a quality piece of furniture that will go together smoothly and give years of enjoyment . Please do not return to the store STOP Broken or missing parts? Need help with assembly? Hardware List A B C D E Cambolt (11pcs) Camlock (11pcs) Wood dowel (20pcs) Allen bolt (18pcs) Barrel Nut (18pcs) F G H I J Allen wrench Wall screw (1pc) Sticker (24pcs) Bracket (1pc) Screw (1pc) (1pc) K L M N Plastic anchor Glue (1pc) Glue : For securing please apply to Foot pin (4pcs) Sticker (4pcs) wood dowel first before inserting (1pc) into panel . Panel List 2 7 8 Left small crossbar (1pc) 1 3 4 6 5 Top panel (1pc) Upper shelf (1pc) Right small crossbar (1pc) 10 9 Lower shelf (1pc) Rear-left Front-left Rear-right Front-right Medium shelf (1pc) leg (1pc) leg (1pc) leg (1pc) leg (1pc) 13 14 11 12 Upper crossbar Medium crossbar Bottom crossbar (1pc) (1pc) (1pc) Bottom panel (1pc) *Please count and verify all parts before assembly .* Page 2 of 7 Assembling the unit with camlocks and wood dowels. Arrow must face hole Gently screw cambolt Lightly glue one end of Lightly glue wood dowel and Screw the camlock into the threaded anchor. the wood dowel and tap connect to second panel by firmly into locked halfway into hole.
    [Show full text]
  • Jig for Threaded Inserts / Making Raised Panels
    ONLINE EXTRAS Jig for Threaded Inserts 1 Most of the devices I’ve threaded inserts, I get out notch to hold a /4"-20 hex- Finally, I added a spring seen for installing threaded a shop-built, hand-held jig head bolt and a nylon bush- between the bushing and inserts use a nut and bolt that I use with a ratchet, as ing. The through hole is the nut and washer that are to drive the insert into the in the photo below. This jig sized to hold the bolt, and tightened against the insert. 1 workpiece. The real trick lets me drive the inserts in the /2"-dia. counterbore is The spring provides just 1 with this procedure is keep- straight every time. drilled 1 /4" deep to accept enough downward pres- 1 ing the insert straight as The tool is just a block of the /4" i.d. bushing that sure to help the threads on 3 you’re screwing it into the hardwood with a /4"-deep holds the bolt straight while the outside of the insert to { Threaded inserts wood — it’s not nearly as notch cut in one corner, see you tighten it down. cut into the wood. W (and machine easy as you might think. So drawing. A counterbored screws) allow when I need to install some hole is drilled through the NOTE: Apply wax you to join two to insert pieces so they can before be disassembled installing easily later. NOTE: Cut down a 3"-long ¼"-20 bolt so only ½" hexhead of threads remain bolt ¼" I.D.
    [Show full text]
  • Table of Contents
    Table of Contents 1 Ordering Information 2 Customer List 3 Fabrication Services & Products 4 Ultra Lightweight Racing Mufflers 5-7 Plenums & Air Filters (ITG) 8-12 Aeroduct 12 Aerospace Hardware & Fasteners Overview 13 Bolts Overview 14-15 AN3 - AN10 Series Specifications: Hex Head; AN Bolt 16-17 NAS1103 Series Specifications: Hex Head; Short Therad 18-19 NAS1303 Series Specifications: Hex Head; Long Thread 20-21 MS21250 Series Specifications: 12 Point 22-23 MS20004 Series Specifications: Internal Wrenching 24-25 NAS6303 Series Specifications: Hex Head; A286 Stainless 26-27 NAS1102 Series Specifications: Torq-Set Screw 28 Aerospace Bolt Interchange 29 Torque & Fastener Matching Information 30-31 Nut Index 32 AN364/AN365 Series Specifications 33 AN316 Series Specifications 34 MS21042/NAS1294 Series Specifications 35 Metric Jetnuts (PH135) Series Specifications 36 12 Point Nuts Series Specs: NAS1804/H93 & BACN10HR/H20 37 KFN542 Attached Washer Nuts 38 Nutplate Specifications: MS21047 - MS21075 39-43 Washers: AN960, AN970, MS20002, Tinnerman 44-45 Airframe Control & Aerospace Spherical Bearings 46-47 Camlocs 48-52 Livelock Panel Fasteners 53-57 Threaded Inserts (Keenserts) Inch & Metric 58-62 Tyraps 63 Hardware Kits 64 Heat Reflective Tape 65 AeroCatch & AeroCatch2 66 AeroCatch3 67 Rockwell Hardness & External Thread Dimensions Table 68 Fractional, Decimal, & Metric Equivalency Table 69 Other useful information 70 Order Form 71 Notes 72 Coast Fabrication, Inc. Ph: 714.842.2603 Fax: 714.847.1824 [email protected] 2 Ordering Information Hours of Operation Monday through Friday, 8 am to 5 pm Will Call orders may be picked up between 8:30 am and 3:30 pm. Payment Unless credit has been approved ahead of time, payment must be made by Mastercard, Visa, American Express, Discover, UPS COD, FedEx COD, or prepayment.
    [Show full text]