SPRING-TOOTH, hEAVY TOOTH, HEAVY TOOTH DRAG Harrows LIRA LIRA XL LARI DINAR

MAKE YOUR MONEY WORK! LIRA LEGENDARY LIRA Effective use of min-till and no-till farming technologies depends on the quality of crop residues contol. Keeping the residue and distributing it uniformally provides the following advantages: snow retention, retention of melt and rain water; reduction in water loss from evaporation; improving the organic composition of the soil; reduction of air and water erosion.

Applying LIRA would allow not only to kill the weeds without the expensive chemicals, but also retain moisture and provide air access to seeds.

More than 16 years of successful work in the fields have made the LIRA spring harrow truly legendary! Its simplicity, reliability and the highest quality of work are familiar to farmers in Ukraine, Russia, Kazakhstan and many other countries

The LIRA spring harrow is applied for: • early spring harrowing for crust destruction and encouraging the weeds germination; • weeds destruction in the “white fiber” phase; • moisture retention by interrupting the capillary flow from the substrate; • even distribution of stubble remains on the field; • incorporation of seeds and mineral fertilizers, distributed across the field; • overall when handling the fallow lands and seedbed preparation when fall-ploughing; • windrowing of straw and hay.

15-24 m min 80 hp max 28,8 ha/h 49' - 79' ft max 48 acre/h

3 39—45 HRC

51—57 HRC

Improved tillage quality Premium class spring tooth Good tooth lifetime

Work sections consist of five rows of the The spring tooth diameter is 10 mm - The spring tooth is made of high-quality offset spring teeth with spacing of 38 mm 0,39'' inch, but application of innovative special steel with special heat treatment: - 1.50'' inch between them. hardening significantly (in 2-3 times) general bulk hardening and additional Such arrangement doesn't leave non- increases the tooth wear resistance HFC hardening of ends up to 51-57 HRC. cultivated areas on the field. accounting for the torque streses. Careful cultivation is provided by the adjustable tilt angle of teeth. The teeth tilt angle is adjusted for entire section with limits from 150 /492' to 900 /2952', and interval of 150 /492'. Blockage-free work of teeth and perfect loosening are provided by vibration effect.

Tooth made by other Tooth of manufacturers LOZOVA MACHINERY Precise and carefull soil treatment Uniform distribution of crop residues

Having the chained individual working Special agricultural low-pressure tires Regular combine straw choppers with sections, the LIRA spring harrow almost fully eliminate the risk of damage wide headers do not distribute the perfectly follows any field contours in to plants. Also, these tires eliminate straw optimally. This leads to broken spite of its wide working width. overcompacting of the soil and don’t seedlings, uneven rippening and leave tracks. significant deterioration of the harvesting quality. LIRA harrows solves this issue by uniformally distributing the crop residues.

Forged cross Simple folding-unfolding

Forged crosses compared to welded ones One driver can fold and unfold the harrow due to design of frame and hitch. provide high durability and reliability. For rapid folding/unfolding the LIRA harrow is equipped with transport wheels with adjustable toe angle

Costs of cultivation of 1 ha - 2.47 acre with the LIRA (amortization charges + fuel consumption + repair + maintenance) Technological advantages PTO drive Complex for higher productivity complex

Due to simultaneous incorporation of For the uniform distribution of the spray The REAL unit can be easily mounted the applied spray material, the REAL material along entire working width, the to any other standard LIRA springtooth unit allows achieving the most effective REAL module is assembled with the ARAG harrow, as well as with spring harrows incorporation and minimizing of the agent high-quality control panel and the Annovi from other manufacturers, because it is consumption, as well as environmental Reverberi axialpiston pump with tractor fixed to frame by U-bolts. impact (due to lower application rate), and PTO drive. reducing the number of the unit passes. The unit is equipped with a brake system REAL is equipped with a brake system. which enhances the operating safety.

UNITS FOR SPREADING OF PLANT PROTECTING REAL AGENTS AND COMPLEX FERTILIZERS

6 Advantages LIRA M Durable teeth

Telescopic rigid drawbar for prevention of semi-frames toe-in during quick turns Zero-maintenance conception due to of transport. use of lubrication-free crosses.

Hydraulically controlled transport wheel for simple folding/unfolding.

Tooth harrows LIRA of the “M” series have a reduced transport width of 3 meters - 9' ft corresponding to traffic regulations of the EU countries

3 m TECHNICAL DATA 9' ft NEW REAL-15+ REAL-24+ LIRA-15 LIRA-24 LIRA-21M LIRA-24M LIRA-15 LIRA-24

Working width, m; ft 15 /49' 24 /79' 2121/68' 2424/78' 15/49' 24/79'

Tractor power, hp. min 80 min 130 min 110 minmin 130 min 80 min 150

Tractor power, hp. trailed trailed trailed

Basic weight, kg; lbs 2030 /4.480 3160/6.944 2950/2950/6.5036.944 32803280/7.231 1920/2.028 2200/4.497

Number of working tools 200 320 280 320320 30 48

Teeth spacing, mm; inch 38 /1.50'' 38 /1.50'' —

Tank volume, m3 — — 2,5 5,0

Teeth tilt angle, 0 15, 30, 45, 60, 75, 90 15, 30, 45, 60, 75, 90 —

Pump performance, l/min. — — 185 250

Operating depth, cm; inch max 9/3.54'' max 9/3.54'' —

Operating speed, km/h; mph 8...15 /5-9 8...15 /5-9 8...15/5-9

Efficiency, ha/h max 18 max 28,8 max 24,8 max 28,8 max 18 max 28,8

Fuel consumption, l/ha; gal/ac 0,8...1,5 /0.9-0.16 0,8...1,5/0.9-0.16 1,0...1,8

Transport dimensions 10455х 17170х 16080х 17580х 13876х 21600х (length x width x height), 3710х 4400х 3000х 3000х 4200х 4400х mm; inch 2390 2390 2400 2400 2460 2460 633''х 692''х 411''х 675''х 546''х 850''х 7 146''х 173''х 118''х 118''х 165''х 173''х 94'' 97'' 94'' 94'' 96'' 96'' lira XL NEW LEGEND

8 The base of LIRA ХL is a frame with five rows of teeth, which are 16 mm - 0.63'' inch in diameter and 762 mm - 30'' inch in height, mounted on a parallelogram.

One of the unique features of the LIRA ХL is possibility to perform 5 different operations in one pass. For example, simultaneous early spring harrowing and loosening of topsoil to a depth of 2-10 cm - 0.79''-3.94'' inch does the following:

• keeps moisture; • encourages germination of weeds to be destroyed then; • levels the soil and prepares it for seeding; • incorporates fertilizers and pesticides; • uniformly distributes stubble remains.

The main advantage is special suspension of separate work sections, which allows to keep contact with a rough soil. The contour following is better compared to sections on leaf springs. With this harrow farmers receive a uniform soil and good covering of seeds.

15-21 m min 160 hp max 25,2 ha/h 49' - 69' ft max 63 acre/h 9 Suspension of work sections Adjustable attack angle Pressure on the soil

Parallelogram suspension of separate An optimal harrowing is provided by A spring block eliminates undesirable work sections allows to keep contact with adustable teeth angle. vibrations of sections (bouncing) at high a rough soil. It provides perfect contour Attack angle can be adjusted through the speeds, and adjusts a pressure of the work following alongside the whole section whole section within limits 45-90˚. section springs on the soil from 400 to width and uniform distribution of load per 860 kg (881.84 to 1895,98 lbs). each spring block.

10 Durable teeth

Spring tooth is made of high quality special steel with double hardening. The Cable tightening of sections tooth diameter is 16 mm - 0.63'' inch, but due to innovative technology the wear resistance is increased in two-three times Flexible cables allow to simplify the design of the harrow, ensure wings rigidity and with a high strength in an area subject to reduce stresses. They provide perfect turning maneuvering and contour following the torque stresses. alongside the whole harrow width.

11 Forged cross Convinience

Forged crosses, in comparison to welded LIRA XL is quickly transferred from the transport to the working position and back. ones, provide higher durability and Transport wheels are designed for public roads and have adjustable turn angle, which reliability. ensures better maneuvering when moving or folding/unfolding. The two positions of the axles of the wheels are adapted to high speed.

LIRA XL and LARI have unified frame design which allows to transfer heavy tooth harrow into drag harrow and vice versa.

Thus, by buying one machine and a special set of parts, the farmer gets two machines for the price of one.

12 Even soil, uniform distribution of crop residues, safe seeds covering.

TECHNICAL DATA

LIRA XL-15 LIRA XL-21

Working width, m; ft 15 /49' 21/69'

Tractor power, hp min 160 min 300

Coupling with tractor trailed trailed

Basic weight, kg; lbs 5000/12.533 7905/17.427

Teeth spacing, mm; inch 60/2.36'' 60/2.36''

Teeth tilt angle, 0 45-90 45-90

Diameter of a spring tooth, mm; inch 16/0.63'' 16/0.63''

Operating depth, cm; inch 2—10/0.79''-3.94'' 2—10/0.79''-3.94''

Operating speed, km/h; mph max 15/12 max 15/12

Efficiency, ha/h max 12 max 25,2

Fuel consumption, l/ha; gal/ac 2-3/0.2-0.3 2-3/0.2-0.3

Transport dimensions 13160 x 4012 x 3995 16160 x 4012 x 3995 (length x width x height), mm; inch 518''×158''×157'' 636''×158''×157''

13 LARI HEAVY TOOTH DRAG HARROW perfectly EVEN FIELD

14 LARI drag harrow is a universal, simple and reliable implement with high efficiency and low fuel consumption.

Main application - soil loosening and levelling, seddbed preparation, moisture retention and weeds destruction.

LARI makes it possible to start your field works earlier than other machines, in any weather conditions. For example, unlike a regular seedbed cultivator, the drag harrow is almost insensitive to soil moisture, because there is simply nothing to stick and block due to due to its efficient design.

Flexible connection of the harrow sections makes it possible to follow the field surface, while the teeth, made of high-quality material, will ensure effective cultivation to a depth of up to 8 cm - 3.15'' inch.

LIRA XL and LARI have unified frame design which allows to transfer heavy tooth harrow into drag harrow and vice versa.

Thus, by buying one machine and a special set of parts, the farmer gets two machines for the price of one.

6,8-21 m min 80 hp max 25,2 ha/h

22' - 69' ft max 63 acre/h 15 Uniform distribution of crop Durable rhomb-shaped tooth Adjustable attack angle residues

Uniform distribution of crop residues is The most durable tooth on the market Two positions of teeth (active or passive) an important precondition of operation is made of special spring steel with high are suitable for any working conditions at quality of the machines that work the soil surface hardness (55...60 HRC). depth from 3 cm to 8 cm - (1.18 - 3.15'' further. inch). Sections, suspended on chains, Hinged design enables distribution of provide perfect field contours following. any amount of crop residues even after the first pass.

Contour following by separate sections is carried out due to their chains suspension .

16 LARI

LIRA XL and LARI have unified frame design which allow to transfer heavy tooth harrow into drag harrow and vice versa. Thus, buying one implement and special set of parts the farmer gets two implement for price of one.

TECHNICAL DATA

NEW NEW

LARI-7 LARI-15 LARI-18 LARI-21

Working width, m; ft 6,8 14,6/49' 17,8 21/69'

Tractor power, hp min 80 min 160 min 240 min 300

Coupling with tractor semi-trailed semi-trailed semi-trailed semi-trailed

Weight, kg; lbs 3060/6.746 5170/11.397 5850/12.897 7095/15.641

Teeth angles0 220 ;400 22; 40 220 ;400 22; 40

Working depth, cm; inch 8/3.15'' 8/3.15'' 8/3.15'' 8/3.15''

Working speed, km/h; mph 8...15/5...10 8...15/5...10 8...15/5...10 8...15/5...10

Efficiency, ha/h max 8,1 max 17,5 max 21 max 25,2

Fuel consumption, l/ha; gal/ac 2-3/0.2-0.3 2-3/0.2-0.3 2-3/0.2-0.3 2-3/0.2-0.3

Transport dimensions 4500 х 2560 х3550 11650 х 3870 х 3610 11650 х 3870 х 3610 16590 х 3870 х3610 (length x width x height), mm; 177''х 100''х139'' 458''х 152''х 142'' 458''х 152''х 142'' 653''х 152''х142'' inch 17 DINAR AERATE THE SOIL

18 DINAR intensive rotary harrows can be used both for conventional and conservation tillage technologies. They are designed for overall and inter-row cultivation of various cereal and tilled crops, as well as vegetables on all types of soil. These harrows are especially effective in destroying heavy soil crusts, because DINAR intensively mixes and crumbles the soil to a depth of 5 cm.

Depending on tillage type – shallow (fast and extensive) or deep and intense, you just need to set the appropriate force on the double spring to adjust the depth of penetration. And increased speed will help to crumble the soil more intensively with its aeration.

DINAR has an increased durability due to special design of the frame, which is made of a special profile, rotary casted stars, and spring-mounted tines. Due to a high frame the harrow works with high seedlings without any damage to them.

DINAR can work with any tractor with power over 110 hp.

6,2 m-12,9 m min 80 hp max 20,6 ha/h

20' - 42' ft max 50 acre/h 19 Enhanced star tool Careful work through the Additional control of seedlings penetration

Available two variants of star with The harrow is well adapted both for The implement can be additionally diameter of 534 mm: overall and inter-row tillage, and able to equipped with support wheels to adjust 1) ductile iron casting - durable versatile work when the crops are already grown. depth of stars penetration into the soil. star for all kinds of works; With minimum inter-row distance the 2) assembly with forged teeth - for stony DINAR works from 2 leaves to 20 cm of soils, teeth are changable. the plant’s height. At bigger inter-row distance you can work with height of up to 60 cm.

The main advantage (and fundamental difference) of working tools with an oblique tooth compared to a straight tooth is in the geometry of penetration into the soil. Thus, for work through vegetative plants the stars have a bend in the direction of movement and provide vertical penetration into the soil, with minimal damage to plants. If you set the tooth bend against the direction of movement, then the intensity of tillage significantly increases. This is suitable for cultivation of stubble or other works on overall tillage.

20 Simple and fast mounting Two-stage adjustment No gaps of tines of pressure

The tines are mounted by one bolt (“fast Precise tines pressure on a soil is provided Balance mounting of stars provides mounting”). Thus, the less time taking by two springs and two-stage compression, constant contact with a soil, reducing mounting – the less costs for changing which keeps required depth during work. loads on bearing unit and improving the tines depending on different inter-rows. harrowing quality.

21 X-SHIELD sealing

Simple transportation Unique reinforced bearings Possible mounting of the spring harrow

Hydraulically folded frame ensures the There are two reinforced ball bearings An additional spring harrow can be harrow compactness in transport position with X-SHIELD seals. Due to high accuracy mounted in order to remove weeds and minimizes loads on the tractor linkage. of manufacture the level of noise from the soil and to crumble clods with Transport width is 3 m. and vibration is significantly reduced, additional soil loosening increasing service life. Additional remote washer protects bearing from dust and stubble remains.

TECHNICAL DATA NEW

DINAR-6,4 DINAR -12,8

Working width, m; ft 6,2/20' 12,9/42'

Tractor power, hp min 80 min 130

Coupling with tractor trailed semi-trailed

1245-1700 Weight, kg; lbs 4600/10.141 2.744-3.747

Number of tines, pcs 31 65

Number of stars, pcs 62 130

Number of wheels, pcs 2 4

Operation depth, cm; inch max 5/0.16'' max 5/0.16''

Operation speed, km/h; mph max 20/12 max 20/12

Efficiency, ha/h; acre/h max 9,9/24 max 20,6/50

Fuel consumption, l/ha; gal/ac 2,5/0.2 2,5/0.2

Transport dimensions 1620 × 3060 × 3060 7125 х 3000 х 2310 (length x width x height), mm; inch 63''×120''×120'' 280''×118''×90''

22 Comparison of tooth and rotary harrows

h-16'' h-32'' h-8'' d-0.39'' d-0.63''

LIRA LIRA XL LARI SPRING-TOOTH HARROW HEAVY TOOTH HARROW DRAG HARROW

Performed operation LIRA LIRA XL LARI

Cereals stubble cultivation

Moisture retaining in spring on fallow land

Moisture retaining on winter crops

Destruction of weeds in the “white thread” phase

Seedbed preparation on the previously ploughed soil

Inter-row harrowing

Soil aeration through sprouts

perfectly suitable optimally suitable suitable not suitable

23