DOCSLIB.ORG

Shandong Titan Vehicle Co., Ltd

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Shandong Titan Vehicle Co., Ltd SHANDONG TITAN VEHICLE CO., LTD QUOTATION SHEET FOB(USD) : $6568-9700 3 Axle 40 Foot Skeleton Semi Trailer-TITAN Quotation Overall 12400*2500*1550mm Axle 3 Axles Tire 12R22.5 Frame high strength steel Vertical beam 450-500mm Bottom platform 4-5mm King pin 2/3.5 inch bolted type Suspension Heavy duty spring suspension Light LED light Paint Polyurethane paint Spare tire carriers 1 units Ramp Reinforced spring/Hydraulic loading ramp Color Optional Landing gear Brand JOST Tel: +86531 88997626 Phone:+8613064064064(Wechat/Whatsapp) E-mail:[email protected] SHANDONG TITAN VEHICLE CO., LTD Tel: +86 531 88997626 Phone:+8613064064064(Wechat/Whatsapp) E-mail:[email protected] SHANDONG TITAN VEHICLE CO., LTD Heavy duty type suspension: ensure the drving Polyurethane paint: high adhesion, high safety and handle the bad road condition chromaticity, beautiful color, cost is twice than ordinary paint, the paint won't come off after five years Landing gear: TITAN optional Jost landing gear Kin Pin : 2/3.5 inch bolted type which is a world recognized famous brand accessory with a better bearing capacity and long service life LED Light:The whole trailer is equipped with LED Multi axles : For the trailer could have better lamps and will be shipped with a set of taillights and loading capacity. side lights Tel: +86 531 88997626 Phone:+8613064064064(Wechat/Whatsapp) E-mail:[email protected] SHANDONG TITAN VEHICLE CO., LTD Video show 2 Axle 40ft Container Chassis 40ft Skeletal Trailer https://youtu.be/J8_QNCISH5k https://youtu.be/WbEjOqxPxTY 3 Axle Skeleton Semi Trailer 2 Axle 40ft Container Chassis https://youtu.be/NU6W4DhU9Nw https://youtu.be/u0tw8_VlUnk Product Package Tel: +86 531 88997626 Phone:+8613064064064(Wechat/Whatsapp) E-mail:[email protected] SHANDONG TITAN VEHICLE CO., LTD More Details Tel: +86 531 88997626 Phone:+8613064064064(Wechat/Whatsapp) E-mail:[email protected] SHANDONG TITAN VEHICLE CO., LTD Learn about Titan Shandong TITAN Vehicle Co., Ltd. is a well-known manufacturer and exporter of special truck trailers and semi-trailers in China. The company was established in 2004. With 16 years of technology accumulation and 27,000 semi-trailer manufacturing experience, TITAN has become China's best manufacturer and exporter of special trailers and semi-trailers. The main semi-trailers supplied include 40 foot container sidelifter , wind turbine extendable trailers , detachable gooseneck trailer , low bed trailers , container flatbed trailers , oil tank trailers , bulk cement tank trailers , and bulk cargo transportation semi-trailers , acid tankers , dump semi- trailers , container side loaders , modular trailers , wind turbine blade transport trailer . The main semi-trailers supplied include 40 foot container sidelifter , wind turbine extendable trailers , detachable gooseneck trailer , low bed trailers , container flatbed trailers , oil tank trailers , bulk cement tank trailers , and bulk cargo transportation semi-trailers , acid tankers , dump semi- trailers , container side loaders , modular trailers , wind turbine blade transport trailer. TITAN semi- trailers have successfully entered more than 50 countries . Such asTanzania, Mozambique, Malawi, Zimbabwe, Zambia, Algeria, Sudan, Mali, Ghana, Nigeria, Sierra Leone, Liberia, Guinea, Senegal, Argentina , Chile, etc. Company Culture: Durable quality, competitive prices, permanent parts supply services. Our Director Hero Guo | Director Phone:+8613064064064(Whatsapp/Wechat) E-mail:[email protected] Company website: http://www.titanvehicle.com/ "Quality -- The key to success" as enterprise mission since TITAN founded.Our vision is to help customers succeed and to be the leading semi trailer manufacturer in China. Trailers ready for shipment Trailers Removable gooseneck 120 Ton Low Bed 150T Lowboy Trailer for sale packaged trailer for sale in Zimbabwe Trailer Truck for sale in Nigeria Fence semi trailer packaged Cement tanker trailer for sale Packaged and ready for shipment Side wall semi trailer packaged in Mzambique Tel: +86 531 88997626 Phone:+8613064064064(Whatsapp/Wechat) E-mail:[email protected].
Load more

Recommended publications
  • Kiribati Ports Authority
    KIRIBATI PORTS AUTHORITY Dues, Fees & Tariff Betio & Kiritimati Ports November, 2018 PREAMBLE This tariff is designed to provide complete details on dues, fees and rates that KPA applies in accordance to Sections under Part V of the KPA Act 1999. This tariff is the outcome of a thorough review by Management and Board of Directors. The new changes to certain rates particularly to charges to ship-owners are introduced to focus mainly on simplifying charges to ship- owners. In other words, KPA invoice to ship-owners would reflect charges mainly on fixed cost and exclude variable costs such as overtime, overseas bonuses and food rations. Such variable costs would no longer be charged to ship-owners but are to be controlled by KPA from the 25% increase over the stevedoring rates and other certain rates. Security and environmental fees are no longer to be charged separately on the invoice as they are also incorporated in the said 25% increase. The new tariff, on the other hand, is envisaged to assist ship-owners very much in planning ahead their cost in visiting KPA as they would no longer be charged of the variable costs. This new tariff is designed to be effective in November 2018 until it is reviewed again when the need arise. KPA remains to have the authority to review the tariff at any time in association with the approval of the Hon. Minister of Ministry of Information, Communications, Transport and Tourism Development. KIRIBATI PORTS AUTHORITY TARIFF 2018 CONTENT GLOSSARY ................................................................................................................................................................................................. 3 BETIO & KIRITIMATI PORTS DUES, FEES & TARIFF .............................................................................................................................. 6 A: Piloting Services .............................................................................................................................................................................
    [Show full text]
  • Data Base and Comparative Analysis of CT and Transhipment Technologies for CT
    Data base and comparative analysis of CT and transhipment technologies for CT Deliverable D.T.1.2.1. 1 Document Title: Data base and comparative analysis of CT and transhipment technolo- Sub Title: gies for CT Document Version Comments Date Done by History Draft prefilled Template on CT Transhipment 18/4/2017 UM concept Technologies (OBB) Version 01 Draft version 1 with comparative analyses 27/11/2017 SSP (OBB) ITTL Inputs on CT processes , supply chain and Ter- 23/1/2018 LKZ(AKL) minal Villach Design and added pictures 30/1/2018 SSP(OBB) LCA (AKL) Version 2 Additional inputs and comments from partners 20/2/2018 ZAILOG SGKV (BHG) TX EURAC Finalisation 14/3/2018 SSP (OBB) UM Number of pages: 114 Number of annexes: 1 Prepared by: University of Maribor, SSP Consult principal Author(s): Mitja Klemenčič Robert Burg Contribution: AKL; ITTL; LCA, LKZ, EURAC, SGKV, BHG, ZAI- Contributing Author(s):Stane Božičnik LOG, BMVIT Roberto Federico Sebastian Ruckes Alberto Milotti Vlasta Rodošek Tomislav Letnik Katja Hanžič Mateja Matajič Klemen Gostič Juergen Neugebauer Peer Review Partner Date UM 18.3.2018 Approval for delivery AlpinnoCT Coordinator Date SSP Consult for StMB 30.03.2018 2 Content Summary .................................................................................................................................... 9 1 Introduction ...................................................................................................................... 16 2 CT Processes and supply chain in CT ................................................................................. 17 2.1 General description of CT processes for the first mile, long haul and last mile ....... 22 2.1.1 Maritime Combined Transport: First mile/pre-haul .......................................... 22 2.1.2 Continental Combined Transport: First mile ...................................................... 24 2.1.3 Description of CT processes for the long haul ..................................................
    [Show full text]
  • STEELBRO Sidelifter Product Range
    STEELBRO PRODUCT RANGE SB450 45 Tonne Sidelifter SB450 Sidelifter Designed for: • Tough working environments where superior strength is important • Heavy duty use and heavy lifting requirements • Quicker, more efficient lifting of containers • Safe and ease of operation by less experienced users Capability: • 45,000kg lifting capacity • 3.90 metre outreach • 11.8 tonne tare weight* • Handles single 40’ containers • Handles single 20’ containers • Safely handles two close coupled 20’ containers • Able to double stack 20’ and 40’ hi-cube (9’6”) containers • Able to transfer containers from trailer to trailer, trailer to rail wagon, and rail wagon to trailer SIDELIFTER MODEL SB450 SB450 Sidelifter Models : RIGID 20/40 Product Name: SB450RSH2040 A 20/40 foot Semitrailer Sidelifter. Cranes sliding on long triaxle semitrailer. SIDELIFTER MODEL SB450 SB450 Sidelifter Model : Gooseneck 20/40 Product Name: SB450GS2040 Gooseneck 20/40 foot semi- trailer sidelifter. Perfect for lower height requirements SIDELIFTER MODEL SB450 SB450 Sidelifter Model: Truckmount Product Name: SB450SFH20 A Truckmount Sidelifter. Cranes mounted to subframe fixed to truck SIDELIFTER MODEL SB450 SB450 Sidelifter Model: Trombone Extended 40’ position Retracted 20’ position Product Name: SB450TSH2040 A Trombone Sidelifter. Cranes sliding on extendable triaxle semitrailer. SIDELIFTER MODEL SB450 SB450 Sidelifter Model: 20’ Product Name: SB450RFH20 A 20 foot Semitrailer Sidelifter. Cranes mounted fixed to short tandem axle semitrailer SB362 36 Tonne Sidelifter SB362 Sidelifter
    [Show full text]
  • O.T4.1 Including DT4.1.1 Measures Tested in Practice
    AlpInnoCT Guideline for integration of innovative intermodal solutions & approaches into daily CT business Output O.T4.1 including DT4.1.1 Measures tested in practice January 2020 EDIT BY: TX Logistik Junkersring 33 D-53844 Troisdorf Contact: Marc Braun www.txlogistik.eu Content 1 Executive summary ................................................................................................... 7 2 Foreword and introduction ....................................................................................... 9 2.1 AlpInnoCT ................................................................................................................... 9 2.1.1 Project Summary ..................................................................................................... 9 2.1.2 Objectives ................................................................................................................ 9 2.1.3 Outputs .................................................................................................................. 10 2.1.4 Background Wish List ........................................................................................... 10 2.1.4.1 Connection between the Wish List and Pilot Cases of WP T4 ................... 10 2.1.4.2 Analysis of Initiatives not tackled within WP T4 ............................................ 12 3 Pilot Case Implementation ..................................................................................... 16 3.1 Case 1: Slot management: Terminal focus .......................................................
    [Show full text]
  • DICTIONARY of TRUCKING TERMS (Australian and North American Terms)
    DICTIONARY OF TRUCKING TERMS (Australian and North American Terms) - Symbols and Numbers - 2AB-QUAD - Adapted by inventive operators to comply with the current overall length limit of 53.5-metres (175-feet) and exploit tri-axle load limits of up to 23.5- tonnes, the 2AB Quad is a four-trailer combination made up of two A-trailers (regular semi-trailers) coupled via a dolly converter and, in turn, hooked up to a B-double set. These combinations are extensively used by fuel giants Shell and BP on long-distance runs between Adelaide and Darwin and can gross approximately 194-tonnes when used in conjunction with a tri-drive tractor unit thereby employing eight tri-axle groups each capable of accommodating 23.5- tonnes. There is some debate as to whether the two A-trailers should be at the front end of the combination – ahead of the B-double, at the rear end – behind it, or even at either end with the B-double sandwiched in between. It appears that operators have their own ideas as to which set-up handles best and enjoys the best road manners when running at the supposed legal maximum speed of 90- kph or 56-miles per hour. See also, Type 2 Road Train . Mitchell Fuel Kenworth 2AB Quad Mighty Atom 2AB Quad BP Volvo 2AB Quad 2AB-Quads 4-WHEELER - See Four Wheeler. 10-1 - Receiving poorly. 10-2 - Receiving well. 10-3 - Stop transmitting. 10-4 - ¹OK. ²Message received. ³Understood. (Remember that 10-4 only means "message received". If you want to say "yes", use "yes".
    [Show full text]
  • Semi-Trailer Structural Failure Analysis Using Finite Element Method
    Semi-Trailer Structural Failure Analysis Using Finite Element Method A thesis submitted in partial fulfilment of the requirements for the Degree of Master of Engineering in Mechanical Engineering in the University of Canterbury Author: Chetan Chandrakant Baadkar Department of Mechanical Engineering University of Canterbury 2010 TABLE OF CONTENTS ACKNOWLEDGMENTS ............................................................................................................... I LIST OF FIGURES ..................................................................................................................... II LIST OF TABLE ...................................................................................................................... VIII LIST OF SYMBOLS ................................................................................................................... IX ABSTRACT ........................................................................................................................... XII 1 INTRODUCTION .............................................................................................................. 1 1.1 BACKGROUND OF THE STUDY .............................................................................................................................. 1 1.1.1 Company profile ................................................................................................................................ 1 1.1.2 SB330 Side-Lifter Trailer ...................................................................................................................
    [Show full text]
  • MA5IL. ^ Drstrffiutfon of THIS DOCUMENT Fs UNLIMITED * DISCLAIMER
    DISCLAIMER EGG-WM-10877 Revision 1 This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsi• bility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Refer• ence herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recom• mendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. Waste Management Facilities Cost Information for Transportation of Radioactive and Hazardous Materials Fred Feizollahi David Shropshire David Burton Published September 1994 Idaho National Engineering Laboratory EG&G Idaho, Inc. Idaho Falls, Idaho 83415 Prepared for the U.S. Department of Energy Assistant Secretary for Environmental Management Under DOE Idaho Operations Office Contract DE-AC07-76ID01570 IJ i| C6 Tl MA5IL. ^ DrSTRffiUTfON OF THIS DOCUMENT fS UNLIMITED * DISCLAIMER Portions of this document may be illegible in electronic image products. Images are produced from the best available original document. Waste Management Facilities Cost Information for Transportation of Radioactive and Hazardous Materials Prepared by: Hl£l33 Feizollahi ^w Date lorrison Knudsen Conpration Engineering, Construction & Environmental Group David Shropshire, Complex Configuration Technical Support, Date EG&G Idaho, Inc.
    [Show full text]
  • Steelbro Cover with Amendments.Indd
    NEW ZEALAND AUSTRALIA MALAYSIA (HEAD OFFICE) STEELBRO Australia Pty Limited STEELBRO (M) Sdn.Bhd STEELBRO New Zealand Limited 92 William Angliss Drive Karung Berkunci 502 Lot 10, 1-31 Treffers Road Laverton North Jalan Hishamuddin 2 P.O. Box 11-077 Victoria 3026 Pejabat Pos Pelabuhan Klang, Sockburn Australia Kaw 20, Selat Klang Utara Christchurch Telephone: +61 3 9369 0888 42000 Pelabuhan Klang 4200 Port Klang Telephone: +64 3 348 8499 Facsimile: +61 3 9369 0999 Selangor, Darul Ehsan, Malaysia Facsimile: +64 3 348 5786 Email: [email protected] Email: [email protected] Telephone: +60 3 3176 3833 Facsimile: +60 3 3176 2833 Email: [email protected] INTERNATIONAl STEELBRO INTERNATIONAL DIVISION 1-31 Treffers Road, P.O. Box 11-077 Sockburn, Christchurch, New Zealand Telephone: +64 3 348 8499 +61 401 691974 +61 413 831361 Facsimile: +64 3 348 5786 Email: [email protected] Visit our website: www.steelbro.com Distributed by: STEELBRO Our History of its parts” 1878 1967 HENDRICKSON - providing innovative Kubota is proud of its 15 year Partnership with commercial vehicle suspension system solutions STEELBRO™. As STEELBRO™ celebrates its Brothers Joseph and David Steel started In February of 1967, the fi rst Toyota Corona for over 75 years. 125 years, Kubota moves into its 113th year. Both Steel Bros. Coach Factory in Christchurch to be assembled in New Zealand came off the New Zealand with just £5 capital each. Hendrickson International draw on over 75 years of suspension companies have a proud history. production line. Although a ‘fi rst’ for Toyota development experience to provide a wide range of truck and The Kubota V2203-E power plant, ‘is at the heart of the matter’.
    [Show full text]
  • Konteyner Terninalleri Ve Yükleme Boşaltma Araçları.Pdf
    İ.Ü. Deniz Ulaştırma İşletme Mühendisliği,2010 Dr. Gökhan KARA, Limanlar ve Terminaller www.gokhankara.com T.C. İSTANBUL ÜNİVERSİTESİ MÜHENDİSLİK FAKÜLTESİ LİMANLAR VE TERMİNALLER KONTEYNER L İ MANLARI VE YÜKLEME‐ BOŞ ALTMA ARAÇLARI YRD. DOÇ. DR. GÖKHAN KARA DENİZ ULAŞTIRMA İŞLETME MÜHENDİSLİĞİ BÖLÜMÜ NİSAN 2010 1 BÖLÜM 2 KONTEYNER LİMANLARI KONTEYNER TERMİNALLERİ VE KONTEYNER Konteynerizasyonun babası Amerikalı Malcolm McLean’dir. 1930’lu yılların sonlarına doğru McLean, Hoboken limanında parça yüklerin yüklenmesi/boşaltılması ve bir yerden başka bir yere naklin (birden çok parçanın) bir defada yapılabilmesi düşüncesinden yola çıkarak önce yükleri araçlara (treyler) doldurup bu araçların gemilere bindirilmesiyle (traktör ile) işe başlamıştır. Daha sonra taşıyıcı araçların gemi içinde çok yer kapladığını düşünmüş bundan dolayı vasıtaları kısaltma çarelerini aramıştır. Örneğin çekicisi olmayan treylerlerin daha az yer tuttuğunu ve gemiye daha fazla treyler sığdığını görmüş. Bundan sonra treylerleri küçültmeyi düşünmüş ve konteyner fikrine ulaşmıştır. Konteyner şeklindeki kapların üst üste konabilmesi nedeniyle hem daha az yer kapladığını hem de yükleme-boşaltmasının daha kolay olduğunu görmüştür. Literatürde bilinen ilk konteyner gemisi, 1956 yılında “Maxton” isimli tankerin 60 konteyner taşıyacak şekilde dizayn edilmiş hali olan “İdeal X” isimli şileptir. Bir limandan başka bir limana ilk konteyner nakli, bu gemi ile 20 Nisan 1956 tarihinde Houston limanına yapmış ve 58 konteyner taşınmıştır. Avrupa’nın ilk konteyner gemisi ile tanışması ise bundan yaklaşık 10 yıl sonra 6 Mayıs 1966 tarihinde olmuştur. Aynı şekilde ilk düzenli hat yine Mc Lean’in kurucusu olduğu Sea Land’dır. Önceleri konteyner boyutları Amerika tarafından (ASA) belirlenmiş daha sonra ülkeler hatta kıtalar arası (özellikle Avrupa ve Japonya) konteyner taşımacılığının gelişmesi yükleme boşlatmalarda kolaylık ve birlikteliğin sağlanması düşüncesi ile yeni standartların belirlenmesi gereği doğmuştur.
    [Show full text]
  • The Maintenance of the Radiological Categorization Depends U P A
    .DUE DATE ACTION me7 2002 SPNRD:RGB:024 t3M Approval of Ke-Categorization of Building 881 as a Radiological Pacitity Alan M. Parker President and Chief Executive O€ficer Kaiser-fill Company, L.L.C. Referelm: Letter, Snyder Ea Bostic, 02-W-01052,dtd August 22., 2002, Subject: Transmittal af the Facility Safety Analysis, Building 88 1 and Related Facilities, Revision 0; Request fa Approval on the ReCategoxizaticw to Radiological, DPS-013-02 The Department of Energy-Rocky Rats Field office {DOE-RWO) approves the re-categ&mtion of Building 881 and related facilities fiom Hazard Cmtegory 3 nuclear Fzcilities to radiohgka! facilities as transmitted in the re€erence. The transmitted documentation indicates that Ihe current radiologkd materid inventories are less than half of the lower threshold limit for Hazard Category 3 designation. The ducumentation also indicates that the hveutories ofother nun-raifiokogkd inventorks are bdQW thresholds ul- concern. Also, the DOE-RFFO agrees that the transmitted documentatkm satkfies the Building 88 I authorization basis annual update requirement. The DOE-KEF0 understands &at the facitity ca&ts to RwQ Flats Environmeattal Tehology Site(Site) level imylementaticm af the Site Safiety Management Fro-. It is also understood that the maintenance of the radiological categorization depends upa prohibition on the receipt of any radioactive waste by the facilities in the Building 883 complex, other than the return of waste generated as part of dismantlement, decontamination, md &d~tionactivities in the BuiIding 88 1 complex. The DOE-RFFO also approves the removd of ail Building 88 Z complex equbmxtt from the Reportable Equipnunt List associated with the Occurrence Reporting Process Pmdm, I-D97-ADM-Lfi.O1,Should you hauc any questions, please contact Ron Bostic at extension 2109.
    [Show full text]
  • Industry Terminology
    Industry Terminology Overview: Below is a list of trucking industry terms. The terms are broken up into 6 different sections: General Terms, Driver/Carrier Terms, Vehicle Terms, Vehicle Parts Terms, Trailer Terms, and Trailer Configuration Terms. General Terms Definitions Bill of Lading A paper document between a shipper and a carrier acknowledging (BOL, BL, B/L): the receipt of goods for transport. Usually describes the nature of the cargo; hazardous materials classification (if any); amount of cargo by weight, size, and/or number of pallets, boxes, barrels, etc; and the origin and destination of the cargo. Bobtailing: Operating a tractor unit with no trailer attached. (See Deadheading). Broker: A person or company that arranges for the truck transportation of cargo belonging to others, using for-hire carriers to provide the actual truck transportation. Bulk Cargo or Large quantities of undivided or unpackaged cargo, such as a tank Bulk Freight: trailer filled with gasoline. Cabotage: The rights of a country to control the movement of vessels and vehicles transporting goods or passengers within its borders. May refer to the transportation of cargo between two points within a country by a vehicle registered in another country. Cargo: See Freight/Commodity. Consignee: The person or entity transferring legal responsibility or ownership of the cargo (or consignment) from the carrier. (Receiver). Consignment: An agreement between a consignee and a consignor in which the goods are taken responsibility for and transported by a third party, the carrier. May also simply refer to the consigned goods (i.e., the cargo). (Shipper). Consignor: The person or entity transferring legal responsibility or ownership of the cargo (or consignment) to the carrier.
    [Show full text]
  • 4.3.1. Welding of the Sidelifter
    ÇUKUROVA UNIVERSITY INSTITUTE OF NATURAL AND APPLIED SCIENCES MSc THESIS Erinç ULUDAMAR DEVELOPMENT OF A SPECIAL SIDELIFTER FOR TRANSFERRING CONTAINERS BETWEEN RAILROAD FREIGHT CARS AND TRAILERS DEPARTMENT OF MECHANICAL ENGINEERING ADANA, 2012 ÇUKUROVA UNIVERSITY INSTITUTE OF NATURAL AND APPLIED SCIENCES DEVELOPMENT OF A SPECIAL SIDELIFTER FOR TRANSFERRING CONTAINERS BETWEEN RAILROAD FREIGHT CARS AND TRAILERS Erinç ULUDAMAR MSc THESIS DEPARTMENT OF MECHANICAL ENGINEERING We certify that the thesis titled above was reviewed and approved for the award of degree of the Master of Science by the board of jury on 09/01/2012 ……………….................... ……………………………… …………………………………… Prof.Dr. Kadir AYDIN Assoc.Prof.Dr. Hakan YAVUZ Asst.Prof.Dr. Kerimcan ÇELEBİ SUPERVISOR MEMBER MEMBER This MSc Thesis is written at the Department of Institute of Natural And Applied Sciences of Çukurova University. Registration Number: Prof. Dr. İlhami YEĞİNGİL Director Institute of Natural and Applied Sciences Note: The usage of the presented specific declarations, tables, figures, and photographs either in this thesis or in any other reference without citation is subject to "The law of Arts and Intellectual Products" number of 5846 of Turkish Republic ABSTRACT MSc THESIS DEVELOPMENT OF A SPECIAL SIDELIFTER FOR TRANSFERRING CONTAINERS BETWEEN RAILROAD FREIGHT CARS AND TRAILERS Erinç ULUDAMAR ÇUKUROVA UNIVERSITY INSTITUTE OF NATURAL AND APPLIED SCIENCES DEPARTMENT OF MECHANICAL ENGINEERING Supervisor : Prof.Dr. Kadir AYDIN Year: 2012, Pages: 97 Jury : Prof.Dr. Kadir AYDIN : Assoc.Prof.Dr. Hakan YAVUZ : Asst.Prof.Dr. Kerimcan ÇELEBİ In this study, a container loading and unloading mechanism which is assembled on a semi-trailer, is designed and manufactured. This design is supported with a mechanism which can be adjusted according to different dimensioned ISO standard containers.
    [Show full text]