Chassis Irs Axles Axle Beams Axle Beams 40Mm Square 45Mm Square 1400Kg

46 CHASSIS IRS AXLES AXLE BEAMS AXLE BEAMS 40MM SQUARE 45MM SQUARE 1400KG

1346mm 036014 1397mm 036015 1448mm 036016 Simple and effective engineering. The 1600mm 036059 hexagonal axle tube houses three rubber 1499mm 036018 1625mm 036060 elements held in place by a triple fluted 1549mm 036020 1650mm 036061 inner tube. Suspension movement between 1575mm 036021 bump and rebound rolls the rubber elements 1676mm 036062 providing dampening of road shocks. IRS 1600mm 036022 1702mm 036063 axles are manufactured to order. Contact us 1625mm 036023 1727mm 036064 for a quote. 1650mm 036024 1778mm 036065 AXLE BEAMS 1676mm 036025 1829mm 036066 39MM ROUND 1702mm 036026 1905mm 036067 1727mm 036027 1956mm 036068 1753mm 036028 1980mm 036069 1778mm 036029 2032mm 036070 1345mm 035998 1804mm 036030 2108mm 036071 1397mm 035999 1829mm 036031 2185mm 036072 1499mm 036000 1854mm 036032 2210mm 036073 1524mm 036001 1880mm 036033 2260mm 036074 1549mm 036002 1905mm 036034 2286mm 036075 1575mm 036003 1930mm 036035 2362mm 036076 1600mm 036004 1956mm 036036 2440mm 036077 1626mm 036005 1981mm 036037 2007mm 1650mm 036006 036038 AXLE NUT, 1676mm 036007 2032mm 036039 WASHER AND PIN 1702mm 036008 2057mm 036040 KIT 1778mm 036009 2108mm 036042 1804mm 036010 2134mm 036043 1905mm 036011 2159mm 036044 1930mm 036012 2184mm 036045 1956mm 036013 2210mm 036046 2235mm 036047 Pre-packed. 2 per card 038757 2261mm 036048 Slotted axle nut 006549 STUB AXLES Axle washer 006550 ROUND 2286mm 036049 2311mm 036050 Axle cotter pin 40 x 3.2mm 006551 2337mm 036051 2362mm 036052 BRAKE 2388mm 036053 ASSEMBLY PLATE 2413mm 036054 MECHANICAL 2438mm 036055

STUB AXLES 39mm x 205mm overall SQUARE short round 036078 39mm x 250mm overall long round 036079 45mm x 205mm heavy duty round 036081 45mm x 240mm long 45mm sq 205mm 036080 heavy duty round 036082 230mm x 45mm RH (off side) 006340 45mmsq 305mm 036086 45mm x 280mm long 230mm x 45mm LH (near side) 006341 40mm sq 205mm overall short 036084 heavy duty round 036083 40mm sq 300mm overall long 036085 CHASSIS 47 NON BRAKED BRAKE ASSEMBLY PLATES MECHANICAL/HYDRAULIC DISC HUBS ELECTRIC BRAKE HUBS GALVANISED GALVANISED

HT Holden 036166 Complete with bearings and seals. With mechanical park brake. 250mm x 56mm Fold 036167 HT Holden 036102 HQ Holden LH Alko 006334 036168 HT Velox 036103 Commodore RH Alko 006333 036169 Ford 036104 HT Velox LH Offroad 036111 036170 HQ Holden 036105 RH Offroad 036112 Boxed Sets complete with Slimline Bearings Commodore 036106 RH Trailtech 036113 HT Holden 038754 NON BRAKED HUBS LH Trailtech 036114 Ford 038755

BRAKE MOUNTING PLATES HUB DRUMS Mechanical / Electrical

Complete with bearings and seals in a variety of stud patterns HT Holden 036087 40mm round hole 006395 Complete with studs, nuts, seals, bearings Mini 036088 45mm round hole 006397 and grease cap. Ford Falcon 4 Stud 1/2” 036089 230mm Mechanical and Hydraulic ME9 Datsun 4 Stud 7/16” 038099 HT Holden 036118 Landcruiser 6 Stud HD 036090 Ford 036119 Cortina 4 Stud 038100 HQ Holden 036120 Ford Falcon 5 Stud 036091 Slimline Toyota Landcruiser 6 stud 036121 HT Velox Small Flange 036092 Slimline Toyota Landcruiser 5 stud 036122 HQ Holden 036093 40mm square hole 036115 Slimline Ford 036123 Blank 150mm Std 036094 F100 HD 038101 BRAKE MOUNTING PLATES 250mm Electric ME12 HT Alko 036124 HT Special HD 036095 HYDRAULIC HQ Alko 036126 Ford Special HD 036096 Toyota Landcruiser 6 stud 036127 HQ Special HD 036097 Toyota Landcruiser 5 stud 036128 Landcruiser 5 Stud HD 036098 Ford Slimline 036129 Commodore 036099 Landcruiser 6 Stud Holden 036101 40mm 006359 Boxed Kits 45mm 036116 MECHANICAL DISC BRAKE HQ Holden 038751 Bolt and nut 1 x 7/16 UNF CALIPERS suit adaptor plate 036117 Pressure Adjusting Screw HT Holden 038752 Pad Nut only 7/16 UNF 006336 Ford 5 Stud 038753 Lever Arm

BRAKE MECHANICAL / HYDRAULIC DISC ASSEMBLY PLATE BRAKE HUBS HYDRAULIC Return Spring Brake Disc Pads Mounting Bush

Adaptor Plate 40mm 036147 Mounting Bolt Alko 036158 Return Spring 036159 Pressure Pad Alko 036160 With mechanical park brake. 230mm x 45mm HT Holden 036149 Brake Pad 036161 Without park brake. 230mm x 45mm Ford 036150 Mounting Bush S/S Alko 036163 LH 036107 HQ Holden 036151 RH 036108 48 CHASSIS MECHANICAL DISC TYPICAL HUB-STUB ASSEMBLY BRAKE CALIPERS

Forward Pull Centre Pull Forward pull: For use on beam axles A100M 036145 Boxed Set of 2 038761 Centre pull: For use with IRS 036146 40mm Axles and Stubs use STANDARD Bearings HYDRAULIC DISC BRAKE 45mm Axles and Stubs use SLIMLINE Bearings CALIPER Note: Landcruiser, Land Rover and F100 use SLIMLINE Bearings.

ELECTRIC BRAKE MAGNETS

Trigg Marinised 036153 Brake Pad Trojan 036162 LH and RH lever HYDRAULIC DISC suit round BRAKE CALIPERS LH and RH lever suit oval

Kelsey Hayes Round Magnet Kit

Suitable for installations where more than one axle is used. Can be operated using hydraulic override couplings. Suitable for 12mm to 15mm. Box of 2. 038762 Dexter Oval Magnet Kit Off Road Magnet Kit Slide Pin Kit. Pack of 1 038764

Kelsey Hayes Round Type Dexter Oval Type HYDRAULIC DISC complete with spring and clip 006379 complete with spring and clip 006384 BRAKE PADS Off Road Magnet Kelsey Hayes LH Lever Oval Type LH 006388 suit Dexter 006386 Off Road Magnet Kelsey Hayes RH Lever Oval Type RH 006389 suit Dexter 006387

Pack of 2 038763 ELECTRIC BRAKE SPARE PARTS METAL GREASE CAP

brake shoe spring (electric)

lever Holden 006568 brake shoe Suit 1.5 - 2 tonne axles 006569 retaining pin & spring Pack of 2 038756 ELECTRIC BRAKE SHOES

brake shoe Ad- magnet justers circlip

254mm x 560mm Primary 006390 electric brake brake shoes 254mm x 560mm Secondary 006391 magnet CHASSIS 49 HUB CONES AND CUPS WHEEL STUDS HAYES ENERGIZE III BRAKE CONTROLLER

Inner Outer Standard - Holden Short spline 7/16” Holden 006635 Inner Bearing Kit 006553 Short spline 1/2” Ford 006636 Inner Cone 036173 Smooth, proportional trailer braking. Long spline 1/2” Industrial Compatible with all electronic systems (ABS, Inner Cup 036174 55mm special 036186 Cruise, etc.). Trailer/tow vehicle stop lights Outer Bearing Kit 006554 Short spline 1/2” Industrial operate when trailer brakes are applied Outer Cone 036171 50mm special 036187 automatically or with manual lever. Wide range of mounting positions.Compact, rugged Outer Cup 036172 Long Spline 9/16” 036188 case. 000937 Heavy Duty - Ford Short Spline 9/16” 036189 Inner Bearing Kit 006555 TEKONSHA VOYAGER BRAKE STUD AND NUT KITS Inner Cone 036177 CONTROLLER 9030 Inner Cup 036178 Outer Bearing Kit 006556 Outer Cone 036175 Outer Cup 036176 Pack of 5 studs and nuts BEARING KITS WITH SEAL 7/16” Plated Wheel 038758 Compact and easy to install. Minimises false braking. Suits 2-4 magnets. 000947 1/2” Black Wheel 038759 1/2” Plated Wheel 038760 TEKONSHA PRODIGY BRAKE CONTROLLER BEARING PROTECTOR DUST 4 piece boxed sets to keep in glove box. COVER Comprises cup and cone, seal and grease cap. Holden 006563 Composite 006562 Red plastic dust and water covers. Pack of 2. 006575 Works proportionally in reverse to Ford TWK12 006565 assistreverse parking. Allows application Holden with seal 036183 BEARING of more initial braking power when towing heavier trailers. Made for up to 4 axle trailer PROTECTORS braking systems. Easy to fit and remove. SUPER SEALS 000949

Set of 2 hub seals suitable for boat trailers. Slimline Bearing 036180 Pocket mounting kit. Standard Bearing 036181 000950 Pressurised steel greaseable hub system OIL SEALS Pack of 2 006574

LUBRICANTS

No.609 suit Standard Bearing 006558 Pre-assembled wiring harness. 000951 No.610 suit Slimline Bearing 006559

WHEEL NUTS TEKONSHA ELECTRIC BREAKAWAY SWITCH Lubrimatic Marine Grease is water insoluable, resistant to salt air and water which controls rust. Can be used in many marine applications and is excellent for water pumps. o 7/16” 60 Holden 006638 454g tub. 006576 o 1/2” 60 Ford 006639 Castrol High Temp Bearing Grease Applies electric brakes automatically when Windsor wheel nut adaptor 006640 500g tub 006579 accidental trailer breakaway from the towing 5 stud TLC 9/16” 60o 036190 Castrol Boating Grease 500g tub 006580 vehicle occurs. 000938 50 CHASSIS SENTINEL BRAKE CONTROLLER BRAKE CABLE KIT D SHACKLES ZINC PLATED

Digital display, solid state, no moving parts, 5mm 006726 no hydraulic connections, no levelling 6mm 006725 required. Compact size, mounts anywhere inside passenger compartment. Includes 8mm 006724 mounting bracket, hardware and instrucitons. 10mm 006723 Consists of 8m of 8mm cable, cable adjuster, 040752 2 rope clamps and 2 cable pulleys. 006370 12mm 006727 CAMEC BREAKAWAY KIT WIRE CABLE CLAMPS BOW SHACKLES

Galvanised brake cable (wire rope) clamps 8mm 006731 Suits caravans, trailers and horse floats, used to secure brake cable to attachments suits all electric brakes, includes breakaway 10mm 006732 3mm clamp 006371 switch. Single & dual axle, compact and 4mm clamp 036194 TRAILER IDENTIFICATION PLATE easy to install. Charging of the battery can 5mm clamp 006372 be done via the tow vehicle auxiliary line. 6mm clamp 006373 Rechargeable battery included, manual test circuit and battery charge indicator. 040119w BRAKE CABLE THIMBLE BRAKE-SAFE ELECTRIC BREAKAWAY KIT 2 piece VIN plate with tyre placard 036226

4mm 036195 700KG PRESSED METAL COUPLING 5mm 036196

Automatically recharges when connected to PULLEY tow vehicle. Applies brakes and brake lights on trailer if it is accidentally separated from tow vehicle. 5000 2-4 magnets 000940 50mm drawbar 006276 4024 Brake-Safe battery only 000941 Lock and key to suit 036198 5000XP 6-8 magnets 000942 Diecast pulley with fabricated strap. 006362 TEKONSHA SHURSET QUICK RELEASE BREAKAWAY KIT BRAKE CABLE BOLT ON COUPLINGS ADJUSTER

Lockable breakaway kit for all single, tandem and tri-axle breakaway applications. Kit 3 hole 2270kg capacity. 036199 contains polymer battery case with A-frame Brake adjuster with combined pulley or post mounting bracket, 12V sealed and turnbuckle. 006361 rechargeable 5 amp battery, nylon breakaway switch and DC to DC heavy duty quick maintenance (2 stage) in line charger.000939 TURNBUCKLE & LOCKNUT BRAKE CABLE - WIRE ROPE

2 hole 2000kg capacity with ball adjust. Zinc plated 006278 4mm 006369 10mm with locknut Eye & eye. 006367 5mm 036193 CHASSIS 51 TRIGG QUICK RELEASE BOLT ON TRIGG MECHANICAL OVERRIDE BRAKE arm COUPLINGS A150 COUPLING ATTACHMENT

006319 2000kg capacity. 50mm plunger couplings fitted with head adjusting screw. Trigg brake arm 2 hole 006273 attachment 3 hole 006274 2000kg capacity. No brake arm 006283 4 hole 006275

QUICK RELEASE TRIGG MECHANICAL RING TYPE BOLT ON ELECTRIC COUPLING BRAKE COUPLING

Contoured hand brake lever with anti-swing ratchet. 006315

HYDRAULIC OVERRIDE COUPLING 2000kg capacity. No brake arm. 036210

3500kg capacity. 4 hole zinc plated with arm suits electric brakes. 006280 MECHANICAL RING TYPE COUPLING FIXED RING COUPLING

2000kg capacity. 006281

TREG 4WD POLY BLOCK 3 hole bolt pattern. 3000kg capacity. No brake arm. 036211 COUPLINGS

3500kg capacity 036202 6000kg capacity 036204 Trigg anti swivel park brake lever

MECHANICAL OVERRIDE COUPLING LESS BRAKE ARM 3000kg capacity. Bolt on mechanical override coupling. Trigg Hand Brake assembly can be used. 006300 3000kg capacity. Weld on non-braked coupling. No handbrake provision. 006301 Detachable U bracket and pin 006295 Detachable pin and lynch pin 006293 Limited swivel baseplate restricts rotation of Zinc plated. Treg safety lynch pin 6mm 006294 ring and prevents lock up on pintle hooks. 1000kg capacity 036208 Suits Trigg mechanical overide ring coupling Poly block 006297 2000kg capacity 006285 . 036220 Treg lockable spring pin 006299 52 CHASSIS TRIGG 4WD FIXED COUPLING COUPLING JOCKEY WHEEL 3 PIECE BOLT ON ADAPTOR COMPLETE 150mm

3,000kg off-road unbraked coupling, featuring full 360o rotation. Includes towbar adaptor. Polyblock with brass bushes and 10mm locking pin. 90o grease nipples fitted for easy Standard 006402 servicing. Gooseneck bolt available. 006302 Without clamp 006404 TRIGG 4WD OVER-RIDE 150mm rubber wheel only 006428 COUPLING 3 PIECE BOLT ON Converts mechanical couplings to hydraulic using 3/4” master cylinder (Part No.006346) 006317 JOCKEY WHEEL Bracket only to suit 200mm 3/4” master cylinder 006316

GAS CYLINDER CRADLES 2,000kg off-road override braked coupling, featuring full 360o rotation. Includes towbar adaptor. Polyblock with brass bushes and 10mm locking pin. 90o grease nipples fitted for easy servicing. Gooseneck bolt available. 036215

HYDRAULIC MASTER CYLINDER

With single clamp and 200mm wheel, fully 9kg plated. Universal adjustable with non-slip pressed ring outer Extra strong base 003827 tube. Standard height 006408 3/4” Complete. 2000kg capacity 006346 Extra height - outer housing Cap only to suit 3/4” cylinder 006350 is 510mm long 006407 7/8” Complete. 3000kg capacity 006347

MECHANICAL 200MM JOCKEY PARKING WHEEL H/D MECHANISM INDUSTRIAL

4kg plated. Universal Adjustable with adaptor 003824 Top mounting parking lever for mechanical or electric brake trailers. Press button release. 036218 BRAKE ARM SUIT STRAIGHT DRAWBAR - GALVANISED

Complete with swivel plate and locking pin 50mm 036224 006415 9kg plated. Adjustable clasp 003829 75mm 036225 Swivel Plate. Heavy duty weld on 006421 CHASSIS 53 JOCKEY WHEELS JOCKEY WHEELS POWER MOVER SOLID WHEEL WITH LOCKING WITH SOLID WHEEL SWIVEL BRACKET

4.10 x 3.50 x 4 with clamp. 038556

150mm With small bracket and locking pin 036244 Ratchet jockey wheel. Assists the manual movement of a caravan or trailer. Includes handle and clamp 038543 Lever Handle Only 000464

MACO MULE TRACTION WHEELS 4.10 x 3.50 x 4 complete with locking swivel bracket. 038561

TRAILTECH JOCKEY WHEEL SUIT BOX TRAILER L/DUTY 150MM 150mm With large bracket and locking pin 006406

Single Wheel

Suitable for use only on box trailers 006401 200mm With bracket and locking pin 006416

TRAILTECH JOCKEY WHEEL WITH SWIVEL CLAMP L/DUTY MANUTEC HEAVY DUTY 150MM INDUSTRIAL JOCKEY WHEEL Dual Wheel

Ratchet level drive, one hand operation with detachable handle. Acts as efﬁ cient brake on grades. Geared for maximum traction with minimum effort. Maximum safe working load 1,000kg draw bar weight for both the dual and single wheels. Inbuilt differential that equal- ises turning circles and reduces drag.

Single Wheel for smaller or medium sized vans and trailers built on a single axle. 000433 Dual Wheel for larger vans and trailers with With H/D Pin Locking Swivel Bracket tandem wheels. 000460 Light duty use only 036243 200mm 036248 Lever Handle Only 000434 54 CHASSIS TRAIL-A-MATE HYDRAULIC ADJUSTABLE JOCKEY WHEEL RECEIVER JOCKEY WHEEL STAND WITH FLAT BASE

Rubber support cradle for use under jockey wheels. Fits 150mm, 200mm and 250mm wheels. 000410

JOCKEY WHEEL HANDLES Complete with clamp For stress free raising and lowering of cara- 355mm 006450 vans, boats and trailers. Suitable for most jockey wheel brackets. Both a jack and jockey 510mm 006451 wheel. No need to climb under the vehicle to jack it up. Trail-a-Mate has a safe working SIDE WINDING ADJUSTABLE Easylift 036264 load of 1000kg when base is fitted. Includes STAND - FLAT BASE safety non-slip lugs built in safety lock, Alko 006438 detachable wheel, flat base plate, jacking Alko Grip Handle 006424 brackets and lifting clamp Trail-A-Mate JOCKEY WHEEL AXLES Hydraulic Jockey Wheel 000417 Spare flat base plate 000418 Spare lifting clamp 000420 575mm Spare jacking brackets 000422 Service Kit 000427 Jacking handle 000429 150mm Alko 036259 Axle Circlip 036260

Adjustable stand with loose handle. No swivel SIDEWINDER JOCKEY WHEEL JOCKEY WHEEL THRUST RACE AND JACK bracket or mounting tube. Lift 350mm. Static load capacity 1000kg. 036252 BEARING MANUTEC ADJUSTABLE STAND - HEAVY DUTY

Will suit most jockey wheels with 150mm wheels. 006440

JOCKEY WHEEL For stress free raising and lowering of 500mm caravans, boats and trailers. Suitable for most CLAMPS jockey wheel brackets. No need for a jack and jockey wheel - this will do both jobs. Includes detachable wheel, flat base plate, jacking brackets and lifting clamp. 000431 Adjustable stand with heavy duty pin locking Single Standard Clamp 006418 EASYLIFT JOCKEY STAND WITH swivel brackets supplied loose. Height Boxed 038769 SWIVEL CLAMP 500mm lift 225mm. Static load capacity 1250kg 006447

U BOLT KIT SUIT ALKO JOCKEY WHEEL Swivel Clamp. No weld required 006422

75mm long drawbar. 2 per card.

Heavy duty stand complete with weld on 100mm wide 036246 swivel clamp 510mm. 036251 75mm wide 036247 Swivel Clamp with locking pin 036263 CHASSIS 55 JOCKEY WHEEL SPARE WHEELS WIND DOWN LEGS DROP DOWN FRONT CORNER STEADY PLUS BIG FOOT

Rubber Wheels 200mm easylift 036268 150mm Alko 006428 Front Hex Drive. Side bolt. Zinc plated. 500mm 006476 600mm 006477 Corner steady with “Big Foot” leg pad attached. Provides a flat load bearing surface, 700mm 006478 ideal for soft ground. Steel Wheel 590mm 006483 200mm Alko 006429 740mm 006485 Replacement handle 006484

CARAVAN REAR LEG WINDER HANDLES Rear Hex Drive. Side bolt with wheel. Zinc plated. Tyre and Tube Complete Pneumatic 500mm 006479 4.10 x 4 Artwell 036270 600mm 006480 Rubber Inner Tube 550mm easylift/Artwell 006493 2.50 x 4 006433 FRONT AND REAR LEGS SUIT JAYCO 720mm easylift/Artwell 006494 4.10 x 3.50 006437 Rubber Tyres 4.10 x 3.50 x 4 ply 036266

MANUTEC WELD ON ADJUSTABLE LEGS - REAR Hex Drive - top mount bolt on. Galvanised. 500mm Front 006481 700mm Rear 006482

MANUTEC QUICK RELEASE 550mm Hexagonal 006495 ADJUSTABLE LEGS Slotted type handle fitting 500mm 006473 600mm 006474

MANUTEC ADJUSTABLE LEGS WELD ON - FRONT

Weld on - lift 240mm Millard old style jack handle 006498 400mm 006488 520mm 006490 Hex head handle fitting. 500mm 006469 “BIG FOOT” LEG PADS

Slotted type handle fitting Provides a flat load bearing surface for corner 500mm 006470 800mm Alko hex drive steadies, ideal for soft ground. 006499 600mm 006472 Set of 4. 006486 1150mm Alko hex drive 006500 56 CHASSIS POLYETHELENE MUDGUARDS TRAILER MUDGUARDS JUNIOR SPRINGS

150mm wide galvanised to suit 200mm wheel. 036279

Spring length is measured from centre of eye at front to centre of slide at rear. Spring ratings are guidelines only. Strong, modern look, step treads on both sides and top - complete with mudflaps. TRAILER MUDGUARDS TANDEM Brackets not included

300mm Small White 036283 Size Rating (mm) (kg) 300mm Small Silver 036284 BROOKER 330mm Medium White 036285 6 leaf 45 x 6 x 580 700 036296 330mm Medium Silver 036286 6 leaf 45 x 6 x 725 620 036297 355mm Large White 036287 355mm Large Silver 036288 NYLON BUSHED 355mm Large Black 036289 230mm galvanised 036280 3 leaf 45 x 8 x 710 425 036299 230mm black 036281 4 leaf 45 x 8 x 710 550 036300 200mm galvanised 036282 5 leaf 45 x 8 x 710 650 036301 6 leaf 45 x 8 x 710 750 036302 TRAILER MUDGUARDS - HOLDEN SIZED WHEELS 4 leaf 45 x 8 x 710 630 036303 GALVANISED WHEEL ARCH 4 leaf 45 x 8 x 762 640 036304 SINGLE 5 leaf 45 x 8 x 762 760 036305 5 leaf 45 x 8 x 840 710 036306 7 leaf 45 x 8 x 840 950 036307 7 leaf 45 x 8 x 710 1140 036308

TANDEM OFFSET CENTRE Width NYLON BUSHED 200mm galvanised 036276 6 leaf 45 x 6 x 710 474 036310 230mm galvanised 036273 290mm (h) 760-450mm (w) 280mm (d) 7 leaf 45 x 8 x 710 1120 036309 230mm black 036274 006543 6 leaf 45 x 6 x 660 548 036312 7 leaf 45 x 7 x 710 730 036311 4 leaf 45 x 8 x 710 680 036313

GALVANISED WHEEL ARCH TRAILER MUDGUARDS - MINI TANDEM SIZED WHEELS

290mm (h) 1545-1260mm (w) 280mm (d) 200mm wide galvanised 036278 006544 CHASSIS 57 SPRINGS 5 & 7 LEAF TANDEM SPRING REAR HANGER SUIT SLIPPER Size Rating ASSEMBLIES ON FLAT BAR SPRING (mm) (kg) UNBUSHED 7/8 EYE RB 4 leaf 45 x 6 x 762 296 036315 Rating shown are per side. 6 leaf 45 x 6 x 762 445 036314 Suit 45mm slipper spring 036368 4 leaf 45 x 6 x 610 365 036316 SHACKLE BOLTS/NUTS Non Greaseable Spring Assemblies 6 leaf 45 x 6 x 840 395 036317 5 leaf TA1500 750 036348 SLIPPER AUSTRALIAN MADE 7 leaf TA2000 1000 036349 2 leaf 45 x 6.5 x 720 160 036318 7 leaf TA2000-16 1000 036350 Bolts & Nuts Greasable 3 leaf 45 x 6.5 x 720 300 036319 6 leaf TA600 750 036351 3 1/2” x 9/16” 036369 4 leaf 45 x 6.5 x 720 450 036320 3 1/2” x 5/8” 036370 Spring Only 5 leaf 45 x 6.5 x 720 500 036321 Bolts & Nuts Non-Greasable 6 leaf 45 x 6.5 x 720 600 036322 Front spring only suit TA1500 036352 3 1/2”x 9/16” 036371 8 leaf 45 x 6.5 x 720 800 036323 Rear spring only suit TA1500 036353 3 1/4”x 5/8” 036372 Front spring only suit TA2000 036354 5 leaf 45 x 6.5 x 585 650 036324 Nuts Rear spring only suit TA2000 036355 SLIPPER DACROMET IMPORTED 9/16” Nyloc nut UNF 036373 3 leaf 45x 6 x 720 300 036333 TANDEM AXLE SPRING FITTINGS 5/8” Nyloc nut UNF 036374 4 leaf 45 x 6 x 720 400 036334 1/2” Whitworth nut Nyloc 006530 5 leaf 45 x 6 x 720 500 036335 1/2” Whitworth nut zinc plated 006531 Bolt 6 leaf 45 x 6 x 720 600 036336 3 1/2” x 1/2” Whitworth hex bolt 036375 7 leaf 45 x 6 x 720 675 036337 SHACKLE PLATES PARABOLIC SLIPPER SPRINGS Fabricated Rocker Arm with Bushes 036360 GALVANISED 45MM WIDE

1/2” hole Black - holes 65mm centre to centre 036377 Tandem Cast Rocker Arm Galvanised - holes 75mm centre to centre TA2000 A676 036362 036378 1 leaf spring tapered from centre to each end. 9/16” hole One size ﬁ tting for all capacities. Black - holes 75mm centre to centre 006526 1 leaf 45 x 13 x 860 300 036338 Galvanised - holes 75mm centre to centre 1 leaf 45 x 15 x 860 500 036339 036379 SPLIT PIN OFF ROAD AUSTRALIAN MADE Tandem Cast Rocker Arm TA2000-16 036363

FRONT SPRING U HANGER 32mm x 3.2mm steel 036422

FISH PLATES

Includes U bolt kit 45mm wide

7 leaf 60 x 6.5 x 850 500 036342 12mm hole 036364 8mm multi-ﬁ t with slotted holes. Black 006527 8 leaf 60 x 6.5 x 850 650 036343 14mm hole 036365 9 leaf 60 x 6.5 x 850 750 036344 Galvanised 036380 REAR SPRING HANGER BLOCK AXLE PAD 40MM SQ SPRING ASSEMBLIES ON FLAT BAR

To ﬁ t centre pin of spring 6 leaf TA750 375kg 036346 Single Bulk 036387 8 leaf TA1250 600kg 036347 22mm ID No Bush 036367 Galvanised. 1 per pack 038768 58 CHASSIS U BOLTS - 1/2” WHIT SPRING BUSHES MILLARD SINGLE SPAT NEW STYLE

Nylon Bushes Nuts sold separately 1 3/4” x 3/4” x 1/2” 036381 Square Black 1 3/4” x 7/8” x 1/2” 006533 White plastic 036433 115mm x 40mm 036391 1 3/4” x 7/8” x 5/8” 006534 125mm x 40mm 036392 VISCOUNT TANDEM SPAT 1 3/4” x 3/4” x 9/16” 006535 125mm x 45mm 006522 1 3/4” x 7/8” x 9/16” 036382 125mm x 50mm 036393 1 1/5” x 7/8” x 5/8” 036386 140mm x 40mm 036394 White. Offside. 140mm x 45mm 006523 006649 White. Nearside 150mm x 40mm 036395 SPRING CENTRE BOLTS & NUTS 006650 150mm x 50mm 006524 White plastic Sold in pairs only (LH/RH) 036434 165mm x4 5mm 036396 Round Black MILLARD TANDEM SPAT 125mm x 40mm 036397 125mm x 45mm 036398 50mm x 8mm 036388 125mm x 50mm 036399 65mm x 8mm 036389 150mm x 50mm 036400 75mm x 8mm 036390 White fibreglass. 006646 Square Zinc Plated CARAVAN SHOCK 75mm x 55mm 036401 ABSORBER KIT SMALL VISCOUNT SINGLE SPAT - 75mm x 100mm 036402 LOW PROFILE 100mm x 75mm 036403 100mm x 40mm 036404 100mm x 100mm 036405 114mm x 56mm 036406 130mm x 56mm 036407 Suitable for beam axles White plastic. 006642 115mm x 40mm 036408 Set of 2 036423 White fibreglass 006643 125mm x 40mm 036409 WINDSOR CARAVAN SHOCK 125mm x 45mm 036410 ABSORBER SPARE WHEEL CARRIER 125mm x 50mm 036411 WELD ON 140mm x 40mm 036412 140mm x 45mm 036413 150mm x 40mm 036414 150mm x 50mm 036415 Can be welded direct to A-frame or bumper Shock absorber 006654 165mm x 45mm 036416 bar. Retaining disc keeps the spare wheel Coil spring blue 600kg 006658 secure with provision for padlock Round Zinc Plated Top plate 006655 . 000511 100mm x 40mm 036417 125mm x 40mm 036418 VISCOUNT SINGLE WHEEL SPAT SPARE WHEEL CARRIER DUNFORD BOLT ON 125mm x 45mm 036419 125mm x 50mm 036420 150mm x 50mm 036421

U-Bolt Kits White fibreglass. Offside 006647 Complete with 2 U-bolts and nuts for 2 U-bolts, 4 nuts, and washers, White fibreglass. Nearside 006648 temporary fixing to A-frame. Retaining disc Suit 39mm axles 038766 White plastic keeps the spare wheel secure with provision Sold in pairs only (LH/RH) 036432 for padlock. 000512 Suit 40mm axles 038767 MILLARD SINGLE SPAT JAYCO SPARE WHEEL CARRIER GREASE NIPPLES - SPRINGS OLD STYLE BOLT ON

Straight 036376 White fibreglass 006645 000515 CHASSIS 59 SINGLE CARAVAN STEP LOW TECHNO-STEP 12V ELECTRIC TOWBALL COVERS PROFILE STEP

“Hav-A-Ball “soft black plastic. 000849 Black plastic with spring clip suits 50mm and 1 7/8” towballs. 000848 Chrome plastic with spring clip suits 50mm and 1 7/8” towballs. 000850

Steel 455mm wide 170mm mounting frame. 006501 MULTIFIT TOWBALL SPANNER

SINGLE CARAVAN TREADPLATE STEP Can be used for towball nuts, snap up bracket bolts, D shackles, towbar tongue bolts and adjustable ball mount bolts and nuts. 006256

GALVANISED LINK CHAIN 560mm wide. Operated by a switch. Aluminium/steel construction. Single step 006508 Double step 006509

Steel. 500mm wide. CHROME TOWBALLS Sold by the metre 165mm mounting frame. 006502 10mm long link 006722

“TRAILER COP’ COUPLING LOCK DOUBLE CARAVAN STEP 1 7/8” towball. Shank 7/8” dia. x 51mm long. Towing capacity 2270kg. 006255

Quick release expanding towball coupling lock. Fits all popular trailer couplings with a barrel lock for high security. Easy to operate. 50mm long shank towball. Shank 7/8” dia. x 000385 62mm long. Towing capacity 3500kg 006252 COUPLEMATE DUAL COUPLING LOCK

Painted. 490mm x 180mm 006504 50mm long shank towball. Shank 7/8” dia. x 80mm long. Towing capacity 2500kg 006250

Dual lock which locks car and trailer TECHNO-STEP MANUAL STEP together. Padlock not included. 000392 TRAILER COUPLING LOCK 50mm chrome towball with 25mm hi-rise. Shank 7/8” dia. x 51mm long. Towing capacity 2000kg 006254

Heavy duty 2 position locking system. 560mm wide manual step. 50mm towball. Shank 25mm dia. x 51mm Secures trailer when attached or unattached Aluminium/steel construction 006507 long. Towing capacity 3000kg. 036443 to vehicle. Includes padlock. 000395 60 CHASSIS TRAILER COUPLING LOCK KLAMP IT WHEEL LOCKS ALLOY WHEELS

Heavy duty. Fit in seconds. No Tyre Padlock not included. 000399 200mm Holden bearing mount 036461 Designed to fit on the driver side front tyre PULL PIN LOCKS - REESE with a steel horizontal bar that blocks move- 230mm hub mount 036465 ment. 250mm hub mount 036469 Type Tyre Width Wheel Dia. 250mm bearing mount 036471 250mm hub mount Mini wheel B 165 - 185mm 13 - 15” 000402 Aluminium Performance 036473 C 195 - 205mm 13 - 17” 000403 D 215 - 245mm 15 - 17” 000404 E (4WD) 285mm 14 - 16” 000405 Locking pins for Reese towbars - secures the hitch with a keyed locking pin. SUNRAYSIA STEEL ROAD Prime locking pull pin 036448 WHEELS Reese locking pull pin 000914 With Tyre Reese pull pin 000915 200mm Imperial 036460 Spring cotter pin 000916 200mm Holden bearing mount 036466 200mm hub mount 036464 PULL PIN LOCK - TREG White. 355mm x 152mm 230mm hub mount 036466 Ford 006615 230mm bearing mount 036468 Landcruiser 036454 250mm hub mount 036470 STEEL ROAD WHEELS 250mm bearing mount 036472 250mm hub mount Mini Wheel Performance 036474

Slip the Treg lock pin into the coupling and SPARE RUBBER TUBES AND attach the cylinder onto the machined end. TYRES Then simply turn the key. Includes dust cap. For 4WD use. 036449

Holden HD HR 330mm 038357 PULL PIN HITCH LOCK PLUS Holden HQ 355mm 036452 TREG LOCK Ford 355mm 036453 400 x 8 tube 036479 GALVANISED STEEL ROAD 400 x 8 4 ply tyre 036480 WHEELS 450 x 10 tube 036481 450 x10 6 ply tyre 036482 500 x 10 tyre 036483 600 x 9 tube 036484 4WD security set which comprises Talon Hitch Lock plus Treg Lock. Keyed alike for TRAILER SKID convenience. 036450 Holden HD HR 330mm 036456 STRETCHMASTER WHEEL LOCK Holden HT 355mm 036457 Holden HQ 355mm 036458 Blue trailer skid manufactured from EASYPARK WHEELS Magnalene. Specially formulated for aluminium boats. 50mm x 12mm x 1500mm 007645 FENDER STRIP GROOVED & TRAILER SKID The fastest way to ensure your motor vehicle, Replaces road wheel when parking vehicle boat trailer, aircraft, caravan, box trailer or in area with low headroom - lowers height of camper trailer stays secure. Fits up to 290mm vehicle wide wheels. Hardened steel. Weighs under Ford 006616 3kg. Insurance company approved. 000406 White PVC fender strip and trailer 6 Stud Landcruiser 006617 skid grooved. 007646 CHASSIS 61 BOAT ROLLERS GALVANISED WOBBLE ROLLER JARRETT MANUAL BRAKE BRACKETS WINCHES

Blue polypropelene keel rollers. 100mm 17mm bore 007653 150mm 17mm bore 007654 Single. Mounts a single wobble roller 200mm 21mm bore 007655 5.1 300kg capacity with cable 006685 onto a post. 007677 10.1 500kg capacity with cable 006686

JARRETT MANUAL WINCHES Self centring rubber rollers 150mm 17mm bore 007656 200mm 21mm bore 007657

Cable Webbing Black curved rubber rollers Double. Allows two wobble rollers to be mounted onto a single post. 007678 200mm 21mm bore 007658 Capacity Ratio 300mm 25mm bore 007659 with Cable GALVANISED ROLLER 500kg 3:1 006680 BRACKET 700kg 5:1 1:1 006682 800kg 10:1 5:1 1:1 035663 Car Trailer winch with Cable 1000kg 9.5:1 5:1 1:1 035664 Quad. Allows four wobble rollers to be mounted onto a single post. 007679 Boat winches with Webbing 500kg 3:1 006690 700kg 5:1 006691 2 Round Legs. 700kg 5:1 1:1 006692 Suit 150mm roller 007674 800kg 10:1 5:1 1:1 006693

GALVANISED KEEL ROLLER Galvanised wobble roller post clamps BRACKET Suit 50 x 25mm RHS 007686 Winch handle suit Jarrett hex drive 006720 Suit 50 x 50mm RHS 007687 Suit 75 x 50mm RHS 007689 WINCHES Suit 100 x 50mm RHS 007690

75mm 007667 100mm 007668 Wobble Rollers Safety Winch. 500kg capacity. 150mm 007669 75mm grey Ribbed 007664 Cable not included. 035669 200mm 007670 100mm Black Smooth 007665 305mm 007671 KEEL ROLLER SPINDLES SOLID WOBBLE ROLLER SOCKET AND GALVANISED NUT Boat Winches with Cable. Capacity Ratio Bolt on 19mm post - galvanised 007684 250kg 1:1 006694 75mm roller size, 16mm dia. 007691 750kg 5:1 1:1 035666 100mm roller size, 16mm dia. 007692 1000kg 10:1 5:1 1:1 035667 150mm roller size, 16mm dia. 007693 200mm roller size, 16mm dia. 007694 200mm roller size, 20mm dia. 007695 305mm roller size, 22mm dia. 007696 Weld on 19mm post - black 007685 Winch handle suit Alko - 230mm 035662 62 CHASSIS PURPLELINE CARAVAN MOVERS Purple Line Caravan Movers enable the user to manoeuvre a Caravan via remote control to hitch, de-hitch or park the Caravan into a tight spot. They take the stress out of these highly demanding manoeuvres and the risk of damage to the Caravan. Purple Line Caravan Movers consists of two models each with 2 powerful hi-torque 12 volt electric motors, a 12V electronic control unit and remote control handset and installation hardware. The motors attach to the chassis via means of a bracket and work through a direct drive reduction gearbox connected to solid friction rollers which act through a cross actuation device to drive both wheels on the Caravan which provides precise control over the Caravan’s movements. In a dual configuration (2 motors) both units are capable of moving a Caravan of up to 2.25 tonne and in a quad configuration (4 motors) both units can move a Caravan up to 3.5 tonne on a flat surface. Note; the quad configuration can result in some reduction in manoeuvrability upwards of 2.5 tonnes.

ENDURO CARAVAN MOVER E-GO CARAVAN MOVER E-GO AUTO ENGAGE - ENGAGING THE ROLLERS Specifications: Specifications: (OPTIONAL) • Suitable for single and dual axle Suitable for single and dual axle Caravans. Caravans. Kit includes 2 Power Units, Electronic Control E-go uses a ‘wind-on’ method to move the • Kit includes 2 Power Units, Electronic Unit and Remote Control Handset and Cross rollers onto the tyres. The advantages of the Control Unit, Remote Control Handset Actuation Device. ‘wind-on’ method is that it allows the operator and Cross Actuation Device. Constructed with anodised high strength alloy. to adjust the pressure of the rollers on the tyres relative to the pressure in the tyres or • Constructed with high tensile steel. Weight: 37kgs. the amount of friction required to move the • Weight: 40kgs. Dimensions: 1800mm x 2500mm. Caravan. The benefit of this is that it can be • Dimensions: 1800mm x 2500mm Maximum power output: 585kg. useful where manoeuvring the Caravan up gradients and for heavier Caravans. E-GO is • Maximum power output: 495kg. Efficiency under load: 76 Amps. • Efficiency under load: 84 Amps. also available with an electric engagement Pulling power of 2.25 tones on flat ground. system where the roller engages the tyres • Pulling power of 2.25 tones on flat Safely power a 1.5 tonne caravan on with the push of a button, eliminating any ground. gradients up to 1:4. 040168 human effort. 040169 • Safely power a 1.5 tonne Caravan on gradients up to 1:4. 040167