DOCSLIB.ORG

Signalling Devices Issue Issue Signalling Devices

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Signalling Devices Issue Issue Signalling Devices COVER Final 4/4/08 13:48 Page 1 INDUSTRIAL > HAZARDOUS AREAS > FIRE > MARINE > ACOUSTIC SIGNALLING DEVICES > PROCESS CONTROL > PROCESS DEVICES SIGNALLING > > > FIRE AREAS MARINE ACOUSTIC > HAZARDOUS INDUSTRIAL Unit 17-19, Klaxon Industrial Estate, Warwick Road, Tyseley, Birmingham B11 2HA, England T ++ 44 (0) 121 707 6681 Moflash Signalling Limited reserves the right to modify product specifications F ++ 44 (0) 121 707 8305 without prior notice within our policy E [email protected] of continual product development. W www.moflash.co.uk MOFLASH SIGNALLING CATALOGUE CATALOGUE SIGNALLING MOFLASH 6 ISSUE SIGNALLING DEVICES SIGNALLING DEVICES ISSUE 6 ISSUE 6 ISSUE COVER Final 4/4/08 13:48 Page 2 Moflash intro 4/4/08 10:53 Page 1 CONTENTSNOTES MOFLASHMOFLASH Selection & Application P 04-09 S & A Environmental Factors > Types of Beacons > Levels of Brightness > Lens Colour > Audibility > Installation > Marks & Directives > IP Ratings > Icon Legends Flashing Flashing Filament Beacon Range P 10-16 Filament FF125 Series > FF125ES Series > FFA125 Series > FF201-200 Series > FF401-400 Series LED Beacon Range P 17-25 LED LED02/03 Series > LED125 Series > LEDA125 Series > LEDD125 Series > LED201/200 Series > LED400/401 Series > LEDA600 Spectrum Rotating Rotating Beacon Range P 26-28 Beacon R201/200 Series > RA201/200 Series > R401/400 Series Static StaticFilament Beacon Range P 29-33 Beacon SF125 Series > SFA125 Series > SF201/200 Series > SF401/400 Series Xenon Beacon Range P 34-44 Xenon Beacon X75 Series > X100 Series > X125 Series > X125ES Series > X195 Series > X201/200 Series > X250 Series > X401/400 Series > X501/500 Series Explosion Explosion Proof Range P 45-51 Proof Xenon Beacon > IS Mini LED Beacon > Audible Sounder > UL Explosion Proof Bell > UL Explosion Proof Buzzer Obstacle Obstacle Marking Light Range ICAO Approved P 52-54 Marking LED501/500 Series > FF98MB Series > FF98SF Series > LED-04-2000-02 Automotive Automotive Beacon Range P 55-59 Signalling Rotating MB Range > Rotating SF Range > Xenon MB Range > Xenon SF Range Acoustic Range P 60-73 Acoustic Signalling Piezo Buzzer Range > Industrial & Marine Buzzer Range >Electronic Sounder > Industrial & Marine Air Horn Range >Industrial Hooters Range > Fire Bell > Industrial & Marine Bells Access- Accessories Range P 74-76 ories Wall Brackets > Cage Guards > Pipe Brackets > Anti Vibration Mounts > Domes www.moflash.co.uk T ++44 (0) 121 707 6681 Moflash intro 4/4/08 10:53 Page 2 Moflash intro 4/4/08 10:53 Page 3 INTRODUCTION MOFLASH Welcome to the world of Moflash Moflash Signalling is one of the largest independent manufacturerers of signalling devices in the UK. With its programme of development Moflash is in a strong position to keep meeting the increasing demands of a safety conscious world with its dedicated team based in the UK and the excellent distribution partners spread across 30 Based in Birmingham at the heart of Great Britain, Moflash Signalling is one of the largest countries worldwide. Our products are always available to meet the customer’s independent manufacturers of signalling devices in the UK. Formed from the Moflash needs. Company Co Ltd in 1997, the company has grown dramatically over the last 10 years with the introduction of a number of new product lines and with the acquisition of signalling Moflash can modify or design a beacon to your specific needs. If our standard products from other manufacturers such as the Klaxon range of hooters and horns now products are outside the scope of your project, please speak with our technical produced in the Moflash factory. department to see if we can help, or e-mail you requirements via our contact page on the Moflash web site. All projects will be considered on their The company produces the following types of devices: Incandescent Beacons - both commercial viability. flashing and static, LED and Xenon Beacons, as well as the traditional Rotating Beacons for which Moflash is world famous. On the acoustic side of the business, the company offers And finally our commitment to quality and service continues today as it did Buzzers, Hooters including the iconic Klaxet and ES, Bells, Electronic Sounders, Air Horns when we formed 10 years ago: it underpins our focus and passion for our and Piezo devices for the following markets industry. We believe the next ten years may be even brighter. industrial signalling process control status indication fire and security hazardous location obstruction marking marine automotive safety and protection Moflash serves a diverse range of customers from electrical wholesalers and contractors to global distribution organisations, original equipment manufacturers, engineering consultants, switchboard manufacturers and a variety of end users such as mining manufacturing and electrical and gas utilities, to name but a few. T ++44 (0) 121 707 6681 www.moflash.co.uk Moflash intro 4/4/08 10:53 Page 4 Moflash intro 4/4/08 10:53 Page 5 SELECTION & APPLICATION SELECTION & APPLICATION MOFLASH MOFLASH Selection & Application Types of Visual Warning Beacons Available LED Beacons - ‘LED’ Audibility Moflash manufactures five different types of Visual A Light emitting diode (LED) is a semiconductor Simply producing an audible sound when the beacon Visual Warning Signals device that emits visible light when an electric current Warning beacons. is illuminated. This is of particular use in low level The environment in which the beacon is to be installed passes through it. The four major benefits of LED will determine the product type and light intensity that Rotating Beacons – ‘R’ technology incorporated into warning beacons are: noisy environments if the warning light is obscured is required for any application. Thus a beacon A parabolic reflector, driven by an electric motor, • Low power requirement from direct viewing or as a back-up warning should designed for Industrial use incorporating a very high revolves around a continuously illuminated bulb on the • High efficiency the bulb fail. light output would not be suitable for local signalling vertical axis of the beacon creating a powerful beam • Very long life at a control panel. Alternatively a low light output of light travelling through 360 degrees. These units are • Multiple Colour Signal options in a single beacon beacon would be ineffective for large factory available with either a filament or a tungsten halogen enclosure Installation and Maintenance of environment. bulb. In general this type of beacon has a greater Moflash offer a range of LED options, from beacons Visual Warning Beacons Generally Moflash can supply beacons for all types of degree of light output than other models but this is containing 8 off LEDs up to 144 off LEDs in a single • When installing a Hazard Warning Beacon care enclosure. They can be set in various modes of applications. Listed below are some of the main reduced as the parabolic reflector only illuminates one should be taken to position it in the most effective operation from Flashing, Static and Rotating. Some market areas. given point at a time. beacons have a combined Audible & Visual option. location to allow for all round light visibility and to For r information see pages 10, 11, 23 and 24. Automotive Ethernet compatible and PLC controllable beacons maintain the IP (Ingress Protection) rating of the Warning beacons for use on automobiles (commercial Flashing Filament Beacons – ‘FF’ also make up the range along with high ‘Ingress beacon. Therefore the following parameters should be & private) agricultural / off road vehicles and forklift Operating through an internal circuit, which simply Protection’ encolsures. noted: trucks etc. cycles the bulb On, and Off. These type of beacons • To maintain the IP rating, the beacon should be For further information see our Automotive section. generally give a much lower light output as it takes Level of Brightness longer for the bulb to fully illuminate itself. These units Brightness depends upon the type of beacon chosen mounted with the dome above the black moulded Industrial & Marine are available with either a filament or tungsten halogen the rated power output of the unit i.e.: Watts and base. Never mount the unit with the dome horizontal Warning beacons for heavy duty, high light output bulb. The light output can be improved by the use of a Joules, the distance that the signal is observed from or below base position. applications such as foundries, factory shopfloors, Dioptric (Fresnal) lens which is placed over the bulb and the dome colour of the beacon used. In general if large warehouses, docks, ports and general offshore • Always fit mounting gasket provided (200/1 400/1 & capturing the light emitted, magnifying and directing it the viewing distance is doubled the light intensity use etc. 500/1 series models only) and ensure the ‘O’ ring is in to increase the brightness of the visual signal. In terms observed is reduced to a quarter and if the distance is For further information see our Industrial & Marine section. of light coverage this type of beacon is more efficient quadrupled the light intensity is reduced to a place between the dome and base. Fire & Security sixteenth. as it illuminates the whole surface of the beacon • Fit a suitably IP rated cable gland (not supplied) Warning beacons for light duty, low to medium light constantly through 360 degrees. where appropriate. output to give local indication such as offices, For further information see pages 8, 9 and 23. Beacon Lens Colours hospitals and schools. The intensity of the light can be greatly reduced as it • Regularly clean the beacon dome, as this will improve Static Filament (Continuous) Beacons – ‘SF’ passes through the dome of the beacon. The extent For further information see our Fire & Security section. light output and help dissipate heat build up in the These units are identical to Flashing Filament beacons of this reduction is dependent upon: beacon. Do not clean dome with petroleum based Explosion Proof with the exception that they do not operate through an • The type of light source used i.e.
Load more

Recommended publications
  • Flight Inspection History Written by Scott Thompson - Sacramento Flight Inspection Office (May 2008)
    Flight Inspection History Written by Scott Thompson - Sacramento Flight Inspection Office (May 2008) Through the brief but brilliant span of aviation history, the United States has been at the leading edge of advancing technology, from airframe and engines to navigation aids and avionics. One key component of American aviation progress has always been the airway and navigation system that today makes all-weather transcontinental flight unremarkable and routine. From the initial, tentative efforts aimed at supporting the infant air mail service of the early 1920s and the establishment of the airline industry in the 1930s and 1940s, air navigation later guided aviation into the jet age and now looks to satellite technology for direction. Today, the U.S. Federal Aviation Administration (FAA) provides, as one of many services, the management and maintenance of the American airway system. A little-seen but still important element of that maintenance process is airborne flight inspection. Flight inspection has long been a vital part of providing a safe air transportation system. The concept is almost as old as the airways themselves. The first flight inspectors flew war surplus open-cockpit biplanes, bouncing around with airmail pilots and watching over a steadily growing airway system predicated on airway light beacons to provide navigational guidance. The advent of radio navigation brought an increased importance to the flight inspector, as his was the only platform that could evaluate the radio transmitters from where they were used: in the air. With the development of the Instrument Landing System (ILS) and the Very High Frequency Omni-directional Range (VOR), flight inspection became an essential element to verify the accuracy of the system.
    [Show full text]
  • History of Radio Broadcasting in Montana
    University of Montana ScholarWorks at University of Montana Graduate Student Theses, Dissertations, & Professional Papers Graduate School 1963 History of radio broadcasting in Montana Ron P. Richards The University of Montana Follow this and additional works at: https://scholarworks.umt.edu/etd Let us know how access to this document benefits ou.y Recommended Citation Richards, Ron P., "History of radio broadcasting in Montana" (1963). Graduate Student Theses, Dissertations, & Professional Papers. 5869. https://scholarworks.umt.edu/etd/5869 This Thesis is brought to you for free and open access by the Graduate School at ScholarWorks at University of Montana. It has been accepted for inclusion in Graduate Student Theses, Dissertations, & Professional Papers by an authorized administrator of ScholarWorks at University of Montana. For more information, please contact [email protected]. THE HISTORY OF RADIO BROADCASTING IN MONTANA ty RON P. RICHARDS B. A. in Journalism Montana State University, 1959 Presented in partial fulfillment of the requirements for the degree of Master of Arts in Journalism MONTANA STATE UNIVERSITY 1963 Approved by: Chairman, Board of Examiners Dean, Graduate School Date Reproduced with permission of the copyright owner. Further reproduction prohibited without permission. UMI Number; EP36670 All rights reserved INFORMATION TO ALL USERS The quality of this reproduction is dependent upon the quality of the copy submitted. In the unlikely event that the author did not send a complete manuscript and there are missing pages, these will be noted. Also, if material had to be removed, a note will indicate the deletion. UMT Oiuartation PVUithing UMI EP36670 Published by ProQuest LLC (2013).
    [Show full text]
  • Signalling and Beacon Sites in Dorset
    THE DORSET DIGGER THE NEWSLETTER OF THE DORSET DIGGERS COMMUNITY ARCHAEOLOGY GROUP No 43 December 2016 Signalling and Beacon Sites in Dorset Richard Hood has kicked off this new project. He needs somemorevolunteerstohelpwith the research Introduction The ability to send or receive a message over a distance to warn of impending attack has been used to mobilise troops for defence since the Roman times. The Romans developed a system using five flags or torches to carry a simple message over short distances. This was usually used in battle to pass information out to army commanders. To carry a simple message further, a bonfire was used set on a high point, usually from a mini fort within vision of one or more other sites. This type of warning system was used during the invasion of Britain, when vexation forts could come under attack from tribes yet to be persuaded of the advantages of Roman living. Near the end of the Roman occupation signal stations were employed on the East and South coasts to warn of Saxon pirates. Roman signal stations on the NE coast of England took the form of mini forts, with a ditch and bank for defence. Black Down in Dorset, excavated by Bill Putnam and re examined by Dorset Diggers in 2016 is of this type. The Saxons appear to have had a system of inter divisible beacon sites to warn of Viking attack from the ninth century onwards. Later, beacons were erected to warn of the approach of the Spanish Armada, followed by a similar, but unused system, to warn of Napoleonic invasion.
    [Show full text]
  • Advantages and Limitations of Li- Fi Over Wi-Fi and Ibeacon Technologies By
    ISSN (Online) 2321 – 2004 IJIREEICE ISSN (Print) 2321 – 5526 International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering ISO 3297:2007 Certified Vol. 4, Issue 11, November 2016 Review Paper: Advantages and Limitations of Li- Fi over Wi-Fi and iBeacon Technologies By Deepika D Pai Asst. Professor, (Sel Grade), Department of Electronics and Communication Engineering. Vemana Institute of Technology Abstract: Li-Fi can be thought of as a light-based Wi-Fi. That is, it uses light instead of radio waves to transmit information. And instead of Wi-Fi modems, Li-Fi would use transceiver-fitted LED lamps that can light a room as well as transmit and receive information. Light is inherently safe and can be used in places where radio frequency communication is often deemed problematic, such as in aircraft cabins or hospitals. So visible light communication not only has the potential to solve the problem of lack of spectrum space, but can also enable novel application. The visible light spectrum is unused; it's not regulated, and can be used for communication at very high speeds. This paper compares the Li-Fi technology with Wi-Fi and iBeacon technologies. Keywords: Li-fi, Wi-Fi, iBeacon, visible light communication, BLE communication I. INTRODUCTION In recent trends, wireless communication Wi-Fi is gaining government licence. This new Ethernet standard was tremendous importance. CISCO reported that the compatible with devices and technology working on radio compound annual growth rate (CAGR) of mobile data waves and came to be known as ―Wi-Fi‖ only in 1999. usage per month is around 80% which has led to the saturation of the network spectrum consequently bringing iBeacon: The technology was first introduced by Apple at down its efficiency.
    [Show full text]
  • TMRA Amateur Radio Beacon April 2020
    TMRA Amateur Radio Beacon April 2020 From Rob, KV8P News from the President – April 2020 Hi everyone. All I can say is, "wow". Who knew we'd all be in this position, having cancelled our 2020 Great Lakes Convention and TMRA Hamfest and now looking at cancelling many of our other events early this spring due to this global pandemic COVID- 19 Virus? I don't even know what to say. I just hope everyone is protecting themselves and staying home during this time. We'll get back to normal soon enough. Relax/Breathe! I feel like sharing the meme I saw I facebook the other day where someone mentioned, "Ok now, that thing someone found in Area 51 recently? Yah, please put it back!". haha So, some related updates. We obviously won't be meeting for anything "in-person" right away until given direction by our elected officials to do so. Therefore, I'M NEWLY LICENSED, NOW WHAT" CLASS - Originally scheduled for April 18th is cancelled. We'll pick this one up again next fall. 1 GENERAL MEETINGS: We'll only be holding on-the air Nets on 147.270 (and linked repeaters) in lieu of General meetings until then. Please watch for updates going forward as, starting in May we also may add some facebook live programs and/or zoom programs as well. Please check into our nets on the 2nd Wednesdays at 7pm for some updates. We'll be discussing our next likely operation for Museum Ships on the air in early June during the April net.
    [Show full text]
  • A History of Maritime Radio- Navigation Positioning Systems Used in Poland
    THE JOURNAL OF NAVIGATION (2016), 69, 468–480. © The Royal Institute of Navigation 2016 This is an Open Access article, distributed under the terms of the Creative Commons Attribution licence (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted re-use, distribution, and reproduction in any medium, provided the original work is properly cited. doi:10.1017/S0373463315000879 A History of Maritime Radio- Navigation Positioning Systems used in Poland Cezary Specht, Adam Weintrit and Mariusz Specht (Gdynia Maritime University, Gdynia, Poland) (E-mail: [email protected]) This paper describes the genesis, the principle of operation and characteristics of selected radio-navigation positioning systems, which in addition to terrestrial methods formed a system of navigational marking constituting the primary method for determining the location in the sea areas of Poland in the years 1948–2000, and sometimes even later. The major ones are: maritime circular radiobeacons (RC), Decca-Navigator System (DNS) and Differential GPS (DGPS), as well as solutions forgotten today: AD-2 and SYLEDIS. In this paper, due to its limited volume, the authors have omitted the description of the solutions used by the Polish Navy (RYM, BRAS, JEMIOŁUSZKA, TSIKADA) and the global or continental systems (TRANSIT, GPS, GLONASS, OMEGA, EGNOS, LORAN, CONSOL) - described widely in world literature. KEYWORDS 1. Radio-Navigation. 2. Positioning systems. 3. Decca-Navigator System (DNS). 4. Maritime circular radiobeacons (RC). 5. AD-2 system. 6. SYLEDIS. 7. Differential GPS (DGPS). Submitted: 21 June 2015. Accepted: 30 October 2015. First published online: 11 January 2016. 1. INTRODUCTION. Navigation is the process of object motion control (Specht, 2007), thus determination of position is its essence.
    [Show full text]
  • Lifi Through Reconfigurable Intelligent Surfaces
    1 LiFi Through Reconfigurable Intelligent Surfaces: A New Frontier for 6G? Hanaa Abumarshoud, Lina Mohjazi, Octavia A. Dobre, Marco Di Renzo, Muhammad Ali Imran, and Harald Haas Abstract—Light fidelity (LiFi), which is based on visible light billion by 2030 [1]. The directionality and short-range travel communications (VLC), is celebrated as a cutting-edge technolog- distances of light signals allow for extreme cell densification ical paradigm that is envisioned to be an indispensable part of 6G in indoor, vehicular and underwater communications, provid- systems. Nonetheless, LiFi performance is subject to efficiently overcoming the line-of-sight blockage, whose adverse effect on ing secure high-speed connectivity. It is also considered an wireless reception reliability becomes even more pronounced energy and cost effective technology as it utilises the lighting in highly dynamic environments, such as vehicular application infrastructure to provide connectivity on top of the illumination scenarios. Meanwhile, reconfigurable intelligent surfaces (RIS) functionality. Nonetheless, the achievable capacity in LiFi emerged recently as a revolutionary concept that transfers the systems is limited by: 1) the modulation bandwidth of the physical propagation environment into a fully controllable and customisable space in a low-cost low-power fashion. We anticipate transmitting light-emitting diodes (LEDs), and 2) the high that the integration of RIS in LiFi-enabled networks will not dependency on the line-of-sight (LoS) which means that signal only support blockage mitigation but will also provision complex quality is influenced by link blockage and random receiver interactions among network entities, and is hence manifested as orientation. The use of multiple-input multiple-output (MIMO) a promising platform that enables a plethora of technological configurations is a promising solution to overcome these trends and new applications.
    [Show full text]
  • National Register Nomination
    NPS Form 10-900 OMB No. 1024-0018 United States Department of the Interior National National Park Service Register Listed September 14, 2018 National Register of Historic Places Registration Form This form is for use in nominating or requesting determinations for individual properties and districts. See instructions in National Register Bulletin, How to Complete the National Register of Historic Places Registration Form. If any item does not apply to the property being documented, enter "N/A" for "not applicable." For functions, architectural classification, materials, and areas of significance, enter only categories and subcategories from the instructions. Place additional certification comments, entries, and narrative items on continuation sheets if needed (NPS Form 10-900a). 1. Name of Property Historic name Western Union Building Other names/site number Collins Building; KHRI #173-11076 Name of related Multiple Property Listing N/A 2. Location Street & number 154 N. Topeka Ave. not for publication City or town Wichita vicinity State Kansas Code KS County Sedgwick Code 173 Zip code 67202 3. State/Federal Agency Certification As the designated authority under the National Historic Preservation Act, as amended, I hereby certify that this x nomination _ request for determination of eligibility meets the documentation standards for registering properties in the National Register of Historic Places and meets the procedural and professional requirements set forth in 36 CFR Part 60. In my opinion, the property x_ meets _ does not meet the National Register Criteria. I recommend that this property be considered significant at the following level(s) of significance: national statewide x local Applicable National Register Criteria: x A B C ___D See File Signature of certifying official/Title Patrick Zollner, Deputy SHPO Date Kansas State Historical Society State or Federal agency/bureau or Tribal Government In my opinion, the property meets does not meet the National Register criteria.
    [Show full text]
  • Design of a UAV-Based Radio Receiver for Avalanche Beacon Detection Using Software Defined Radio and Signal Processing
    UPTEC F19 003 Examensarbete 30 hp Februari 2019 Design of a UAV-based radio receiver for avalanche beacon detection using software defined radio and signal processing Richard Hedlund Abstract Design of a UAV-based radio receiver for avalanche beacon detection using software defined radio and signal processing Richard Hedlund Teknisk- naturvetenskaplig fakultet UTH-enheten A fully functional proof of concept radio receiver for detecting avalanche beacons at the frequency 457 kHz was constructed in the work of this master thesis. The radio Besöksadress: receiver is intended to be mounted on an unmanned aerial vehicle (UAV or drone) Ångströmlaboratoriet Lägerhyddsvägen 1 and used to aid the mountain rescue teams by reducing the rescue time in finding Hus 4, Plan 0 avalanche victims carrying a transmitting beacon. The main parts of this master thesis involved hardware requirement analysis, software development, digital signal Postadress: processing and wireless communications. Box 536 751 21 Uppsala The radio receiver was customized to receive low power signal levels because Telefon: magnetic antennas are used and the avalanche beacon will operate in the reactive near 018 – 471 30 03 field of the radio receiver. Noise from external sources has a significant impact on the Telefax: performance of the radio receiver. 018 – 471 30 00 This master thesis allows for straightforward further development and refining of the Hemsida: radio receiver due to the flexibility of the used open-source software development kit http://www.teknat.uu.se/student GNU Radio where the digital signal processing was performed. Handledare: Johan Tenstam Ämnesgranskare: Mikael Sternad Examinator: Tomas Nyberg ISSN: 1401-5757, UPTEC F19 003 Populärvetenskaplig sammanfattning I detta examensarbete har en fullt funktionell "proof of concept" radiomottagare för de- tektering av lavintransceivers på frekvensen 457 kHz konstruerats.
    [Show full text]
  • A Real Time Hf Beacon Monitoring Station for South Africa
    A REAL TIME HF BEACON MONITORING STATION FOR SOUTH AFRICA A thesis submitted in partial fulfilment of the requirements for the degree of MASTER OF SCIENCE of Rhodes University by Courage Mudzingwa June 2009 i Abstract High frequency, HF (3 - 30 MHz), radio communications are greatly affected by ionospheric conditions. Both civilian and military users need reliable, real time propagation information to show at any time the feasibility of communicating to any part of the world on a particular frequency band. For this thesis, an automa- ted receiving/monitoring station for the Northern California DX Foundation (NC- DXF)/ International Amateur Radio Union (IARU) International Beacon Project was setup at the Hermanus Magnetic Observatory, HMO (34.42oS, 19.22oE) to monitor international beacons on 20 m, 17 m, 15 m, 12 m and 10 m bands. The beacons form a world wide multiband network. The task of monitoring the beacons was broken down into two steps. Initially the single band station, at 14.10 MHz, was installed and later it was upgraded to a multiband station capable of automa- tically monitoring all the five HF bands. The single band station setup involved the construction and installation of the half-wave dipole antenna, construction and installation of an HF choke balun; and the choice of Faros 1.3 as the appropriate monitoring software. The multiband monitoring station set-up involved the insta- llation of an MFJ-1778 G5RV multiband antenna, construction and installation of a Communication Interface - V (CI-V) level converter and configuring the Fa- ros 1.3 software to monitor the beacons on all five HF bands.
    [Show full text]
  • Funny Noises by Marshall G
    Funny Noises by Marshall G. Emm N1FN/VK5FN [email protected] [First published in "The Low Down" February 1999] The Mother of All Network Protocols I recently had the pleasure of reading a book called The Victorian Internet, by Tom Standage1. It’s not my intention to review it here, but it gave me a lot to think about and is well worth reading. It’s an enjoyable history of telegraphs and telegraphy, but its true value is in providing a perspective for viewing today’s developments in communications. The basic premise of the book is that the “mother of all networks” was the telegraph network which began before the Civil War and continued to develop into the 1920's. Standage sees the telegraph network as a model for the Internet and there are indeed many similarities. The Internet is often cast as a revolutionary mode of communication, with far-reaching social, political, economic, and moral implications. But if you look at it as a logical extension of technology, the Internet is evolutionary rather than revolutionary. In contrast, the introduction of the electric telegraph was truly revolutionary. That word “electric” is very important, because the first telegraph system was demonstrated in France in 1794, and the french gave it the name “telegraph.” But it used moving signal arms and was limited to line of sight between stations, hence really just an improvement on smoke signals and beacon fires. It took another fifty years of development before the electric telegraph came into being, but once it did the development of true networks was immediate, explosive, and with far-reaching consequences.
    [Show full text]
  • Prosecuting 406/121.5 Mhz Distress Beacons
    PROSECUTING 406/121.5 MHZ DISTRESS BEACONS Table of Contents 1. Purpose and intended recipients of this document 2. Synopsis 3. 406 MHz Distress Beacon Channels and Radio Frequency Spectrum 4. Limitations of the Becker SAR-DF 517 5. 121.5 MHz Homing Signal’s reduced effective radiated power for 406 MHz Beacons 6. CAP Airborne Direction Finder Modernization Efforts 7. Interim Procedures to ensure success when prosecuting newer 406 MHz Beacons 8. When a fix is not obtained from a 406 MHz Beacon-equipped Aircraft 9. Summary Contents 1. Purpose and intended recipients of this document: a. This document discusses the technical issues associated with 406 MHz Distress Beacons, limitations of our existing capabilities and the procedures required to mitigate those limitations. b. This document is recommended reading for certain Incident Command Staff (specifically ICs, OSCs, PSCs, AOBDs, and GOBDs), Mission Pilots, Mission Observers and Ground Team Leaders. 2. Synopsis: a. Newer 406 MHz Distress Beacons are now being sold that transmit on 406 MHz channels that are not detectable by CAP’s current airborne direction finder, the Becker SAR-DF 517. That device is only capable of detecting and processing 2 of the eighteen 406 MHz Distress Beacon Channels (excluding the 406.022 MHz Reference Channel). b. All 406 MHz Distress Beacons used in the United States transmit 121.5 MHz Homing Signal at a power level that is significantly reduced from the old analog-only beacons. c. CAP is modernizing its SAR-DF 517 equipped aircraft to a more capable RHOTHETA model RT-600. d. In the interim, an awareness of today’s limitations and the implementation of additional procedures to mitigate those limitations must be in place to effectively prosecute newer 406 MHz Distress Beacons.
    [Show full text]