Woodworks® Walls and Woodworks™ Ekos® Walls Accessory Dimensions

Total Page：16

File Type：pdf, Size：1020Kb

WALL SYSTEMS Between us, ideas become reality™ WOODWORKS® Walls and WOODWORKS™ Ekos® Walls Accessory Dimensions Wall Installation Spline for WoodWorks Walls 1.875" Finish Molding FurringFurring Strip Strip 2.385" Finish Molding .220" Wall Spline Spline .25" .065" Panel .25".25 1.25" Concealed Wall Installation Spline for WoodWorks Ekos Wall Systems 1.15" 1/2" Finish Molding 3/8" 1/2" 1/2" 3/8" Wall Spline Panel .25" Installed View: 2-3/8" Concealed Wall Installation Spline with Reverse Bead Accent Trim; Finish Molding to the right Decorative Accent Trims – Solid Wood for WoodWorks Ekos Wall Systems 1/2 1/2 1/2 1/2 " " 3/16" " " wide nominal nominal reveal nominal 1/4" 3/16" 3/16" nominal 3/16" Peak Bullnose Reverse Bead Bead 5850A * 5850B * 5850C 5850D * Decorative Accent Trims – Aluminum for WoodWorks Ekos Wall Systems 3/4" 1/8 " 1/2 " recessed 1/8" reveal Cap Reveal 5850J 5850K * Only available for WoodWorks Ekos wall systems. Wall Bead Installation Spline for WoodWorks™ Ekos® Wall Systems 1/8" 3/8" 3/4" 3/8" Installed View: Wall Bead Installation Spline with no Decorative Accent Trim between panels 1-7/8" Concealed Corner Installation Spline for WoodWorks Walls and WoodWorks Ekos Walls 3/8" Installed View: Corner Installation Spline with 1-7/8" Peak Decorative Corner 1" 1/2" Decorative Corners 1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" Peak Bullnose Reverse Bead Chamfered Inside Corner 5851 5852 5853 5854 5867 2 Decorative Molding 3/4" nominal 1" 1-7/8" 1/2" 1-1/2" 1-1/2" 1/2" 1/2" nominal 3/4" ll lumber material (by others) Furring Wall Wall Strip panel panel 1/2" 3/4" 4" Base Molding 6" Base Molding 1" Finish Molding 1-3/4" Finish Molding 5855 5856 5857 5907 Chair Rail Accessories .25" .7098" .813" 1.25" 2.75" Wood Insert Chair 5/8" 1-1/4" Rail 1-1/16" 3/4" 2-1/8" TechLineSM / 1 877 ARMSTRONG 1 877 276 7876 armstrong.com/walls All trademarks used herein are the property of AWI Licensing Company and/or its affiliates BPCS-3851-912 © 2012 AWI Licensing Company • Printed in the United States of America.

Copy Link

Recommended publications

On the Mechanics of the Bow and Arrow 1
On the Mechanics of the Bow and Arrow 1 B.W. Kooi Groningen, The Netherlands 1983 1B.W. Kooi, On the Mechanics of the Bow and Arrow PhD-thesis, Mathematisch Instituut, Rijksuniversiteit Groningen, The Netherlands (1983), Supported by ”Netherlands organization for the advancement of pure research” (Z.W.O.), project (63-57) 2 Contents 1 Introduction 5 1.1 Prefaceandsummary.............................. 5 1.2 Definitionsandclassifications . .. 7 1.3 Constructionofbowsandarrows . .. 11 1.4 Mathematicalmodelling . 14 1.5 Formermathematicalmodels . 17 1.6 Ourmathematicalmodel. 20 1.7 Unitsofmeasurement.............................. 22 1.8 Varietyinarchery................................ 23 1.9 Qualitycoefficients ............................... 25 1.10 Comparison of different mathematical models . ...... 26 1.11 Comparison of the mechanical performance . ....... 28 2 Static deformation of the bow 33 2.1 Summary .................................... 33 2.2 Introduction................................... 33 2.3 Formulationoftheproblem . 34 2.4 Numerical solution of the equation of equilibrium . ......... 37 2.5 Somenumericalresults . 40 2.6 A model of a bow with 100% shooting efficiency . .. 50 2.7 Acknowledgement................................ 52 3 Mechanics of the bow and arrow 55 3.1 Summary .................................... 55 3.2 Introduction................................... 55 3.3 Equationsofmotion .............................. 57 3.4 Finitedifferenceequations . .. 62 3.5 Somenumericalresults . 68 3.6 On the behaviour of the normal force
[Show full text]
Slimline Standard Inswing Door WA8400 (Rev
Slimline Standard Inswing Door WA8400 (rev. 02.06.18) Copyright © 2018 Reveal Windows & Doors All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without permission by Reveal Windows & Doors. Slimline Standard Inswing Door WA8400 (rev. 02.06.18) Slimline Standard Inswing Door WA8400 Section Contents Product Overview ...................................................................................................................................................................................... 3 Introduction ................................................................................................................................................................................................................ 3 Hardware Options ....................................................................................................................................................................................................... 3 Glazing Options ........................................................................................................................................................................................................... 3 Wood Species .............................................................................................................................................................................................................. 3 Hardware Images .......................................................................................................................................................................................................
[Show full text]
Inset Cabinet Doors Create the Perfect Fit by Trimming One Side at a Time
Master Carpenter How to Install Inset Cabinet Doors create the perfect fit by trimming one side at a time BY SCOTT GIBSON aking and fitting cabinet doors takes time, and it has its occasional frustrations. Still, install- ing doors correctly is one of the real pleasures of cabinetmaking. if everything isn’t flat and Msquare or if the hinges aren’t installed properly, the doors won’t work the way they should. For an overlay cabinet door, the process is more forgiving: The door simply closes against the cabinet or face frame. an inset door is another story. it has to be trimmed to fit the door opening exactly, with an even gap all around between the face frame and the door. i like the appearance of inset doors because they don’t look as clunky as overlay doors. When an inset door is fitted cor- THE CRAFTSMAN Woodworker and writer Scott Gibson lives in East Waterboro, Maine. A former newspaper reporter, Scott worked as an editor at Fine Homebuilding before becoming editor in chief of Home Furniture and then Fine Woodworking. In addition to being a journalist, he’s had a lifelong passion for woodworking that’s yielded a whole house full of furniture. Scott and his wife, Susan, moved back to Maine in 2001, and after his new house was finished, he built a good shop. When his son Ben renovated the kitchen in his own house, Scott pitched in for the cabinets, which is where we caught up with him. 64 FiNE HOmEBUilDiNG photos this page: Nat rea COPYRIGHT 2012 by The Taunton Press, Inc.
[Show full text]
Bamboo Hardwoods Product Catalog
Bamboo HardwoodsÆ Product Catalog bamboohardwoodsÆ www.bamboohardwoods.comwww.bamboohardwoods.com About Bamboo Hardwoods Why Choose Bamboo? More Than A Flooring Company Associations & Memberships Plants and other organisms use photosynthesis to remove We are committed to providing service that goes beyond carbon from the atmosphere by incorporating it into biomass. expectations while offering products that expand the limits While doing so they release oxygen into the atmosphere. of quality and sustainability. We take great interest in being Bamboo is, by far, the most eficient plant on this planet at socially responsible and community oriented. sequestering carbon. It converts carbon dioxide into carbon biomass and oxygen 365 days a year. A Young Firm With A Global Mission Bamboo Hardwoods founder Doug Lewis has been Bamboo is harvested and replenished with no impact to the transforming bamboo, what was once considered a weed, environment. It can be selectively harvested annually and is into a sustainable source of wood iber since the mid 1908’s. capable of complete regeneration without the need to replant. He knew of the great potential for bamboo: it grew wood Because of its short growth cycle (it grows one third faster faster than trees. Therefore, he set out to make bamboo a than the fastest growing tree), it can be harvested in 3 - 5 popular and sustainable resource for use in North America by years versus 10 - 100 years for most tree woods. developing looring, furniture, and other building materials. With an amazing tensile strength that rivals steel (it can withstand up Over 15 Years Of Growth And Service to 52,000 pounds of pressure), bamboo is a viable replacement for Bamboo Hardwoods has been in business for over 15 years wood and makes for one of the strongest building materials.
[Show full text]
Architectural Woodwork Standards, 2Nd Edition
Architectural Woodwork Standards WALL/CEILING SURFACING & PARTITIONS 8S E C T I O N SECTION 8 Wall/Ceiling Surfacing and Partitions table of contents INTRODUCTORY INFORMATION COMPLIANCE REQUIREMENTS Guide Specifications ...........................................................................194 GENERAL Introduction .........................................................................................195 Basic Considerations ....................................................................212 Wall and Ceiling Surfacing ..................................................................195 Grades .....................................................................................212 Opaque .........................................................................................195 Economy ...........................................................................212 Transparent ..................................................................................195 Custom ..............................................................................212 Contract Documents ...........................................................................195 Premium ............................................................................212 Product Advisory .................................................................................195 Grade Limitations ..............................................................212 Panel Sequence ..................................................................................196 Contract Documents
[Show full text]
Boral Building Products Inc
So Authentic. So Reliable. Nothing Compares. TruExterior® Siding & Trim is in a class of its own, invented to address issues common with other exterior products on the market. It’s a siding material that offers a high level of dimensional stability to help reduce expansion and contraction. Plus, TruExterior resists water, making it ideal for applications with ground or masonry contact. TruExterior gives builders the freedom to build beautiful homes with confidence. Pictured: Shiplap, Channel Bevel On the Cover: Nickel Gap, Channel 2 So Authentic.So Reliable. Nothing Compares. 3 4 Phenomenal Performance. Remarkable Workability. TruExterior® Siding & Trim offers both and a lasting look while eliminating the need for gluing, gapping and other cumbersome and costly installation techniques. APPLICATION Designed for use in non-structural applications Suitable for ground contact Can be used in moisture-prone areas Installation is the same regardless of the season TOOLS Installed using proven woodworking tools and methods Carbide-tipped blades and bits are recommended for a longer tool life FASTENING Accepts a wide variety of high-quality exterior-grade fasteners that are suitable for the local environment Can be fastened close to the edge No need for pre-drilling No mushrooming PAINTING TruExterior® products come pre-primed and do require paint No need to prime end cuts Can be painted with any high-grade exterior paint when following the paint manufacturer’s instructions Can be painted any color without special precautions as it is not prone to movement caused by heat gain from dark colors* Paint lasts longer than on wood because TruExterior® products cycle virtually no moisture* Traditional exterior-grade caulks, auto-body or wood fillers are all acceptable for filling nail holes *Please see TruExterior® Siding & Trim Limited Warranties and Product Data Sheets for proprietary test results, located at TruExterior.com.
[Show full text]
University of California, San Diego
UNIVERSITY OF CALIFORNIA, SAN DIEGO Fiber Adhesion and interactions of Vessel Distribution and Density in the Impact Resistance of Wood A Thesis submitted in partial satisfaction of the requirements for the degree Master of Science in Materials Science and Engineering by Albert Keisuke Matsushita Committee in Charge Professor Joanna M. McKittrick, Chair Professor Shengqiang Cai Professor Marc Meyers 2017 The Thesis of Albert Keisuke Matsushita is approved and it is acceptable in quality and form for publication on microfilm and electronically: Chair University of California, San Diego 2017 iii Table of Contents Signature Page ................................................................................................................... iii Table of Contents ............................................................................................................... iv List of Figures .................................................................................................................... vi List of Tables ................................................................................................................... viii Acknowledgements ............................................................................................................ ix Abstract of the Thesis ................................................................................................ xi—xii 1 Introduction ..................................................................................................................... 1 2 Background
[Show full text]
Exterior Wall Drainage Requirements
Effective May 11, 2020 Exterior Wall Drainage Requirements FOR MULTIFAMILY AND COMMERCIAL PROJECTS TABLE OF CONTENTS SECTION 1 Exterior Wall Drainage The information in this guide applies to any James Hardie® Requirements siding product installed flat-to-wall, including: SECTION 2 • HardiePanel® vertical siding Drainage Plane • Cempanel® vertical siding Requirements Detail • Prevail® panel siding products • Artisan® siding with lock joint system SECTION 3 Rainscreen Flat-to-wall installation definition: Any siding product where the Requirements Detail rear face of the product does not overlap the front face of the SECTION 4 product when applied per James Hardie installation instructions. FAQ The guidance and instructions provided herein are only valid for and applicable to James Hardie® products. James Hardie Building Products Inc. makes no warranty or representation with respect to the information contained herein for any use other than with James Hardie products, including but not limited to use with fiber cement siding TECHNICAL SERVICES products made by other manufacturers or siding products made of other materials. 888.542.7343 SECTION 1 EXTERIOR WALL DRAINAGE REQUIREMENTS This document only covers James Hardie exterior MINIMUM REQUIREMENTS BY REGION wall drainage requirements. Always follow all applicable CANADA TO FOLLOW LOCAL OR James Hardie installation instructions. PROVINCIAL BUILDING CODE EXCEPTIONS These requirements do not apply to the following: • Building Codes: All national, state, and local building codes must be followed, and where they are more stringent than James Hardie Installation requirements, state and local requirements will take precedence. • Reveal® Panel System is required to be installed WRB1 Dry Climates over furring. The furring provides a rainscreen and the fastening base for Reveal® trims and panels.
[Show full text]
Fry-Reglet-Reveals-Moldings.Pdf
ENGINEERED PRODUCT SYSTEMS Distributed by: BEST MATERIALS ® Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014 www.BestMaterials.com Email: [email protected] REVEALS + MOLDINGS PRODUCT BROCHURE REVEALS + MOLDINGS Distributed by: BEST MATERIALS ® ARCHITECTURAL METALS / REVEALS + MOLDINGS Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014 www.BestMaterials.com Email: [email protected] CONTENTS D Drywall Reveals & Moldings DA DA.1 Reveal DD DD.1 Stepped Outside Corner / DA.2 “F” Reveal Drywall Corner Reveal REVEALS CORNERS DA.3 “Snap-In” Reveal DD.2 Multiple Stepped Outside Corner DA.4 “Z” Reveal DD.3 Beveled Corner DA.5 Reveal Base DD.4 Curved Inside Corner DA.6 Step Trim DD.5 Curved Outside Corner DA.7 “V” Reveal DA.6 Bullnose DA.8 Reverse “V” Reveal DA.9 “W” Reveal DE.1 Column Collar DA.10 Reveal/Picture Hanger DE.2 Reveal Column Ring DA.11 Reveal Channel Screed/Plaster and Stucco COLUMN Control Joint COLLARS + RINGS DE.3 Wall Angle Column Ring DA.12 “F” Reveal DA.13 “T” Molding “W” Reveal Molding DA.14 “X” Molding DF DF.1 DF.2 Drywall/Acoustical Reveal DA.15 “W” Molding ACOUSTICAL DF.3 Acoustical Ceiling Trim DF.4 Acoustical Molding DF.5 “W” Acoustical Reveal Drywall Expansion Joint DB DB.1 DF.6 “F” Acoustical Reveal EXPANSION DF.7 “J” Acoustical Trim JOINTS DG DG.1 Special Sections DG.2 Contemporary Reveal DC DC.1 Corner Trim SPECIAL SECTIONS DC.2 “L” Trim Molding TRIMS DC.3 Edge Trim DH.1 Glazing Track / Drywall Ceiling Track DC.4 Edge Trim DH DH.2 Acoustical Ceiling Tract / DC.5 Radius Corner Trim GLAZING TRACK Drywall Acoustical
[Show full text]
(Pinus Sylvestris L.) Found in the Baltic Sea with the Present-Day Gene Pools in Lithuania
Article DNA Markers Reveal Genetic Associations among 11,000-Year-Old Scots Pine (Pinus sylvestris L.) Found in the Baltic Sea with the Present-Day Gene Pools in Lithuania Darius Danuseviˇcius 1,* , Jurata Buchovska 2, Vladas Žulkus 3, Linas Daugnora 3 and Algirdas Girininkas 3 1 Faculty of Forest Science and Ecology, Agricultural Academy, Vytautas Magnus University, K. DonelaiˇcioStr. 58, LT-44248 Kaunas, Lithuania 2 Institute of Forestry, Lithuanian Research Centre for Agriculture and Forestry, Liepu˛Str. 1 Girionys, LT-53101 Kaunas, Lithuania; [email protected] 3 Institute of Baltic Region History and Archaeology, Klaipeda˙ University, Herkaus Manto Str. 84, LT-92294 Klaipeda,˙ Lithuania; [email protected] (V.Ž.); [email protected] (L.D.); [email protected] (A.G.) * Correspondence: [email protected] Abstract: We aimed to extract DNA and amplify PCR fragments at the mitochondrial DNA Nad7.1 locus and 11 nuclear microsatellite loci in nine circa 11,000-year-old individuals of Scots pine found at the bottom of the Baltic sea and test the genetic associations with the present-day gene pool of Scots pine in Lithuania. We followed a strict anticontamination protocol in the lab and, simultaneously with the aDNA specimens, tested DNA-free controls. The DNA was extracted by an ATMAB protocol from the ancient wood specimens sampled underwater from Scots pine stumps located circa 20–30 m deep and circa 12 km ashore in western Lithuania. As the references, we used Citation: Danuseviˇcius,D.; 30 present-day Lithuanian populations of Scots pine with 25–50 individuals each. The aDNA Buchovska, J.; Žulkus, V.; Daugnora, yield was 11–41 ng/µL.
[Show full text]
WOODWORKS Ekos™ Wall Systems
3842 WW Ekos_508:Layout 1 5/20/08 9:41 AM Page 1 WOODWORKS Ekos™ Wall Systems WOODWORKS Ekos Wall System in Ekos Maple Perforated with Chair Rail Color Selection Due to printing limitations, shade may vary from actual product. Ekos Ekos Ekos Ekos Maple Light Cherry Dark Cherry Mahogany (MP) (LC) (DC) (HG) Ekos Maple perforated panel Detail with Maple Mounting Rail and Aluminum Rail Insert Ekos Mahogany Perforated (magnified view – 5% open area per panel) 3842 WW Ekos_508:Layout 1 5/20/08 9:41 AM Page 2 WOODWORKS Ekos™ Wall Systems Acoustical Benefits • Perforated Ekos panels absorb 45% of sound • STC levels increase as both perforated and unperforated striking the surface Ekos panels are added to standard drywall partitions • Improves sound quality and reduces reverberation • Reduces sound intrusion between spaces and increases within a space speech privacy NRC 5/8″ drywall on Ratings A Mounting D Mounting STC 5/8″ drywall on 3-5/8″ metal studs Ratings 3-5/8″ metal studs with R-11 Fiberglass Ekos insulation in cavity perforated 0.45 0.50 panels Standard 38 44 drywall Ekos Mahogany Perforated One wall 43 52 (magnified view – with Ekos 5% open area per panel) Both walls 46 52 Mahogany Finish Molding and Bullnose Accent Trim with Ekos with perforated panels Sustainable Design • No-added urea-formaldehyde can help contribute to LEED® Low Emissions EQ Credit 4.4 • Going beyond LEED with no detectable formaldehyde Wood back veneer, emissions as tested and approved by independent unstained third-party lab for California Section 01350 • Substrate
[Show full text]
JD Lohr School of Woodworking Advanced Joinery Course Guide
JD Lohr School of Woodworking Advanced Joinery Course Guide Welcome to your Advanced Joinery course! This guide is meant to help you through this week’s class. Completing this project is a huge undertaking in your six days with us. Be sure to review the goals for each day to manage your time and keep yourself on track. If you feel like you’re slipping behind, don’t hesitate to ask us to help! Instructors Robert Spiece – [email protected] Larissa Huff – [email protected] Jeffry Lohr – [email protected] Eoin O’Neill – [email protected] Table of Contents Project plans …. 1 - 7 Monday ….…… 8 – 10 Tuesday ……… 11 – 14 Wednesday …... 14 – 16 Thursday …….. 17 – 19 Friday ……....... 20 – 22 Saturday ……... 22 – 23 Epilogue ……... 24 2 2 3 3 4 4 5 5 6 6 7 7 Monday Introduction: Brief presentation about history of Arts & Crafts furniture as it relates to this project Layout: First, determine the position of the legs in the project. You want to show the attractive faces and hide knots, defects and sapwood. Pay special attention to the grain on legs 1 & 2. This grain should be straight and unconfused as we’ll be hand-chopping dovetails into the top. Use the story stick to layout your mortises on the legs. Use a pencil with a fine point to transfer the dimensions from the story stick onto the legs. Make bold squiggle marks inside your layout lines. Consult the plan Note: Story sticks are a great way to accurately record to ensure that your mortise layout is correct.
[Show full text]