List 3

Approved Manufacturers

of Steel Forgings

This lists identifies forges approved by Lloyd’s Register Group Limited (LR) for the manufacture of steel forgings in accordance with the requirements of LR's Rules for the Manufacture, Testing and Certification of Materials, Chapter 5.

The information listed for each forge is a summary and includes the types of steel and maximum approved forging weight. The types of steel include: carbon carbon-manganese alloy austenitic stainless martensitic stainless The list also includes firms approved for manufacturing using powder metallurgy.

Where required further information should be obtained from the current certificate of approval issued to the manufacturer by LR. Works designated "MQS Approved" are also approved under the Materials Quality Scheme in accordance with LR's Rules for the Manufacture, Testing and Certification of Materials, Chapter 1 Section 2.

Approval only covers the manufacturing location listed, it does not extend to other forges owned by the same company.

The local LR surveying office is also listed.

Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.

As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Austria

BREITENFELD EDELSTAHL AG Forgings carbon5.00 Vienna carbon-manganese 5.00 alloy 5.00 austenitic stainless 5.00 duplex stainless* 5.00 Breitenfelderstrasse 22 8662 St. Barbara im Mürztal Tel +43 (0)3858 6161 231 Fax +43 3858 6161 248 Email: [email protected] Web: http://www.breitenfeld.at Certificate #: MD00/3255/0002/3 Expiry date: 06/06/2021 VOESTALPINE BÖHLER EDELSTAHL GmbH & Co KG Forgings carbon45.00 Vienna carbon-manganese 45.00 alloy 45.00 Mariazellerstraße 25 Postfach 96 A-8605 Kapfenberg Tel: +43 3862 20 7274 Fax: +43 3862 20 37559 Email: mailto: [email protected] Web:http://www.bohler-edelstahl.com Certificate # MD00/0200/0005/3 Expiry date: 20/01/2021

voestalpine BÖHLER Aerospace GmbH & Co. KG Forgings carbon0.70 Vienna carbon-manganese 0.70 alloy 0.70 austenitic stainless 0.70 Mariazellerstaße 25 Postfach 96 A-8605 Kapfenberg Tel: +43 3862 20 6583 Fax: +43 3862 20 7634 email: :[email protected] web: www.bohler-forging.com Certificate #: MD00/2062/0008/3 Expiry date: 20/01/2021

Ni-based alloys accepted for approved applications

Belgium

ARCELOR MITTAL RINGMILL SA Forgings carbon4.00 Antwerp carbon-manganese 4.00 alloy 4.00 B.P. 65 B-4100 Seraing Tel: +32 (0) 4330 3578 E-mail: [email protected]

Website: www.arcelormittalringmill.be

Certificate Number: MD00/0327/0008/3 Expiry: 07/09/2020 HERTECANT FLANGES N.V. Forgings austenitic stainless0.37 Antwerp duplex stainless* 0.37 Lossing 22 2260 Heultje-Westerlo Tel: +32 015 22 49 10 or +32 15229194 Fax: +32 015 22 55 88 email::[email protected] web: www.hertecantflanges.com Certificate #: MD00/0667/0007/3 Expiry date: 24/09/2019

Brazil

AÇOFORJA INDÚSTRIA DE FORJADOS S.A. Forgings carbon20.00 Rio de Janeiro carbon-manganese 20.00 Av. Engenheiro Januário Alvarenga Santos, No. 300 Distrito Industrial Celso Mello Santa Luzia, MG, 33040-220 Tel: +55 31 3649 1706 Fax: +55 31 3649 1717 M +55 31 8459 3220 EMail: mailto:[email protected] Web: www.acoforja.com.br Certificate #: MD00/3860/0003/3 Expiry date: 27/11/2016

Page 2 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office THYSSENKRUPP METALÚRGICA CAMPO LIMPO LTDA. Forgings carbon0.15 São Paulo carbon-manganese 0.15 alloy 0.15 Av. Alfried Krupp 1050 Campo Limpo Paulista, SP CEP 13231-900 Tel: +55 11 4039 9000 Fax: +55 11 4039 9911 Email: [email protected] Web: http://www.thyssenkrupp-metalurgica.com Certificate #: MD00/0898/0008/3 Expiry date: 01/03/2021

THYSSENKRUPP METALÚRGICA SANTA LUZIA Forgings carbon0.08 São Paulo carbon-manganese 0.08 alloy 0.08 Av. Dr Ângelo Teixeira da Costa 2164 Santa Luzia -MG Minas Gerais 33045-170 CEP 33045-170 Tel: +55 31 3649 5116 Fax: +55 31 3649 5040 Email mailto:[email protected] Web: http://www.thyssenkrupp-metalurgica.com Heat treatment is not covered in the scope of approval Certificate #: MD00/2996/0006/3 Expiry date: 06/07/2021

Bulgaria

CASTING FORGING MACHINERY COMPLEX LTD. Forgings carbon21.00 Sofia carbon-manganese 21.00 2400 Radomir, Industrial Zone Tel: 359 77780489 Fax: 359 77782134 email: [email protected] web: www.cfmc.bg

Certificate No: MD00/4386/0003/3 Expiry Date: 14/03/2022

Canada

CANADA FORGINGS INC. Forgings carbon15.00 Toronto carbon-manganese 15.00 P.O. Box 308 130 Hagar St Welland Ontario L3B 5P8 Tel: +1 905 735 1220 Fax: +1 905 735 6992 Email: [email protected] Web http://www.canforge.com Certificate #: MD00/3253/0005/3 Expiry date: 02/08/2021

Chile

FORJADOS S.A. Forgings carbon2.50 Valparaiso carbon-manganese 2.50 alloy 2.50 Camino Santa Rosa S/N Parcela 6 Ruta G-154 Lampa - Santiago Tel: +562 7511500 Email: [email protected] Web page: www.forjados.cl Approval is restricted to shaft and shaft type forgings to 460mm diameter and nominal 3500mm length to maximum weight shown above. Mechanical testing is carried out by approved test houses. Certificate Number: MD00/3787/0003/3 Expiry date: 16/05/2019

China, People's Republic of

ANGANG HEAVY MACHINERY CO., LTD. Forgings carbon90.00 carbon-manganese 90.00 alloy 90.00 STEEL FORGING PLANT West side of Hongqi Road , Province 114042 Tel: +86 412 6765212/6765217 Fax: +86 412 6765218 Email to: [email protected] Web http://www.angangzhongji.com.cn Including semi-built crankshafts (max. throw weight 14 tonnes) Certificate #: MD00/3471/0007/3 Expiry date: 19/05/2020

Page 3 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office ANSHAN SINOKOR FLANGE CO., LTD. Forgings carbon0.11 Dalian carbon-manganese 0.11 austenitic stainless 0.11 Anshan Cheng Dong Anshan Town Qianshan Anshan City Liaoning Province Tel: +86 412 2321511 Fax: +86 412 2321522 Email: [email protected] Web: www.sinokor-flange.com Certificate #: MD00/3487/0005/3 Expiry date: 05/01/2020 AVIC EXCELLENCE FORGING () Co., Ltd. Forgings carbon4.60 carbon-manganese 4.60 alloy 4.60 Yuqi Town, Wuxi City, Province, Tel: +86 510 83896532 Fax: +86 510 83896512 email [email protected] web: www.avic-zy.com

Certificate #: MD00/4086/0003/3 Expiry date: 03/11/2021

BAODING TECHNOLOGY CO., LTD. Forgings carbon46.00 Zhoushan carbon-manganese 46.00 alloy 46.00 austenitic stainless 2.00 Hangzhou Industrial Park of Tangqi Town, Yuhang District, Hanzhou City, Zhejiang Province Tel: +86 (0)571 8638 2518 Fax: +86 (0)571 8638 0688 Mobile: +86 115805819566 email: [email protected] web: www.baoding-tech.com

Certificate #: MD00/3177/0006/3 Expiry date: 15/07/2020

BOEN ENTERPRISES Co., Ltd Forgings carbon0.02 Jiangyin carbon-manganese 0.02 alloy 0.02 No. 66 Qing-Yuan Road, Economic Development Zone, Yixing City, Jiangsu Province, Tel: +86 510 87057901 Fax ? +86 510 87057900 Email: [email protected] ; [email protected] Website; http://www.boen.cn Certificate No. MD00/4033/0001/3 Expiry date: 11.06.2015 BUCC (TIANJIN) PRESSURE EQUIPMENT Forgings alloy0.62 MANUFACTURING CO., LTD. No. 15 baocang Road Junliangcheng Industrial Park dongli District, Tianjin, 300301 Tel: 86 22 24366600 Fax: 86 22 24366066 Email: [email protected] Approved for quench and tempered seamless pressure vessels manufactured by pipe spinning process to BS EN 14359-2006 Maximum approved dimensions = 223mm o/d x 9.5mm w/t. Certificate No. MD00/4355/0002/3 Expiry date: 01/07/2020 KANGNING FORGING CO., LTD. Forgings carbon3.50 Jiangyin carbon-manganese 3.50 alloy 3.50 austenitic stainless 1.10 Fonggou Village, Xueyan Town , Chanzhou City Jiangsu Province, 213171 Tel: +86 519 86217231 Fax: +86 519 8823 6965 Email: [email protected] Web: http://www.czknda.com Certificate #: MD00/4620/0001/3 Expiry date: 06/10/2019

CHINA FIRST HEAVY INDUSTRIES Forgings carbon70.00 Dalian carbon-manganese 70.00 alloy 70.00

Page 4 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Fularji District City Province Tel +86 452 681 1689 Fax +86 452 681 1168 Email: [email protected] Web: www.cfhi.com Including semi-built crankshafts Certificate #: MD00/3186/0006/3 Expiry date: 02/09/2020 CHONGQING CHANGZHENG HEAVY INDUSTRY CO LTD. Forgings carbon2.00 Wuhan carbon-manganese 2.00 alloy 2.00 Fu Niu Xi Da Du Kou Chongqing Tel: +86 23 6156 4630 Fax: +86 23 6156 3019 Email: mailto:[email protected] Web: www.csiccq.com Certificate #: MD00/2246/0007/3 Expiry date: 21/08/2019

CHONGQING DAJIANG JIEXIN FORGING Co., LTD Forgings alloy0.11 Guangzhou Dajiang Industrial Park, Ba'nan District, Chongqing. Tel: +86 (0) 66284822 Fax: +86 (0) 66284822

E-mail: [email protected]

Website: www.cqdjx.com

Certificate No: MD00/4804/0001/3 Expiry Date: 19/09/2021 CHONGQING QINGLING FORGING Co., Ltd. Forgings carbon0.01 Wuhan carbon-manganese 0.01 alloy 0.01 Zhongliangshan Jiulongpo District Chongqing Tel: +86 23 65267844 Fax: +86 23 65267844 Certificate #: MD00/3223/0005/3 Expiry date: 22/03/2021 CHONGQING YANLIAN Forgings carbon22.00 Wuhan carbon-manganese 22.00 alloy 22.00 HEAVY MACHINERY EQUIPMENT Co., Ltd. Degan Industrial Park Jiangjin, Chongqing 402284 Tel No. 0086 23 4726 7901 Fax No. 0086 23 4726 7922 Mob 15823453530 Email: [email protected] Web: www.cqyanlian.com cert no. MD00/3641/0004/3 expiry date 28/03/2021 CITIC Heavy Industries Company Ltd. Forgings carbon20.00 Wuhan carbon-manganese 20.00 No. 206 Jianshe Road Jianxi District Luoyang City Henan Province 471039 Tel: +86 (0)379 64088614 Fax: +86 (0)379 64086221 email [email protected] Web http//:www.citichc.com. Certificate #: MD00/2742/0007/3 Expiry date: 17/10/2021 CRRC CO., LTD. Forgings carbon10.00 Wuhan carbon-manganese 10.00 alloy 8.50 Ziyang City Province Post No. 641301 Tel: +86 028 26282693 Fax: +86 028 26653416 email: [email protected] web: www.zyloco.com

Including CGF crankshafts with K factor = 1.05 for approved applications. Certificate #: MD00/3037/0007/3 Expiry date: 24/11/2020

CSSC MACHINE CO., LTD. Forgings carbon1.80 Nanjing carbon-manganese 1.80 alloy 1.80

Page 5 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Zhong Hua Men Wai, Nanjing, PC210039 Tel No. +86 25 84769250 Fax No. +86 25 86725609 email: [email protected] web luzhou.com.cn Certificate No MD00/3537/0003/3 Expiry Date 30/06/2018 DALIAN CHUANXIN FORGING CO LTD Forgings carbon3.00 Dalian carbon-manganese 3.00 alloy 3.00 Beicang Tun No 72, Liang-jia-dian Street, Free Trade Zone, Dalian, Tel No: +86 411 39706151 Fax No: +86 411 39706151

Email: [email protected]

Certificate No: MD00/3845/0003/3 Expiry Date 08/10/2019 DALIAN CITY JINTAI FORGE FACTORY Forgings carbon2.30 Dalian carbon-manganese 2.30 alloy 2.30 Friendship Street, Longwangmiao Village, , Liaoning Province Tel: +86 411 87854358 Fax: +86 411 87854358 email: : [email protected] Certificate No: MD00/4640/0002/3 Expiry date: 12/12/2019

DALIAN DV VALVE CO., LTD. Forgings carbon0.02 Dalian carbon-manganese 0.02 alloy 0.02 Dalian Daduan Forging Co., Ltd. No. 272 Yaojia Street Nanguanling, Dalian 116037 Tel: +86 411 864 22999 Fax: +86 411 864 22577 Email: [email protected] Web www.dldv.com.cn Certificate Number: MD00/3138/0005/3 Expiry date: 06/02/2020 DALIAN HEAVY FORGING Co,. LTD Forgings carbon10.00 Dalian carbon-manganese 10.00 alloy 5.50 Dalian Economic and Technical Development Area, Liaoning Province. 116600 Tel: + 86-0411-39255371 Fax: +86-0411-39268607

E-mail: [email protected]

Certificate No: MD00/4689/0001/3 Expiry Date: 19/06/2020 DALIAN HONGQI FORGING & PRESS FACTORY Forgings carbon0.14 Dalian carbon-manganese 0.14 alloy 0.14 austenitic stainless 0.14 Tangli Village, Hongqi Street, Ganjingzi District, Dalian, 116021, Tel: +86 411 8428 8865 Fax: +86 411 8428 8863 Email: [email protected] Web: http://www.hqdy.com Certificate Number: MD00/3948/0003/3 Expiry: 17/09/2020 DAYE SPECIAL STEEL CO., LTD. Forgings carbon8.50 Wuhan carbon-manganese 8.50 alloy 8.50 316 Huangshi Avenue Huangshi City Hubei Province Post code: 435001 Tel: +86 (0) 714 629 7888 Ext. 3729 Fax: +86 7147 629 7781 Email [email protected] Web: http://www.xinyrgang.com Certificate Number: MD00/2493/0002/3 Expiry: 14/07/2019 DEQIAN HANGZHONG FORGING CO. LTD., Forgings carbon42.70 Zhoushan carbon-manganese 42.70 alloy 42.70

Page 6 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office No. 8, Jingguan Avenue, Qingshan Economic Development Zone, Lin'an City Hangzhou, Zhejiang Province, 311305 Tel no. +86 0571 58619938 Fax no. +86 0571 58619939 Email: [email protected] Web: www.dqforging.com Certificate No: MD00/3868/0004/3 Expiry Date 27/06/2019 GROUP Forgings carbon26.00 Dalian carbon-manganese 26.00 alloy 26.00 Qiqihar City Heilongjiang Province Tel: +86 452 680 1271 Fax: +86 452 680 1234 email: [email protected] web: bg.bmsteel.com Certificate No: MD00/2907/0006/3 Expiry date: 27/07/2020 DONGBEI SPECIAL STEEL GROUP Forgings carbon8.00 Dalian carbon-manganese 8.00 alloy 8.00 SPECIAL STEEL CO. LTD., East No 8 Anshan Road, Wanghua District, Fushun City, Liaoning Province Tel no: +86 413 668 9161 - 3668 Fax no: +86 413 6674090 Web www.dtsteel.com Certificate No: MD00/3945/0003/3 Expiry date: 04/09/2020

DONGBEI SPECIAL STEEL GROUP Forgings carbon53.50 Dalian carbon-manganese 53.50 alloy 17.00 DALIAN SPECIAL STEEL CO., LTD. No. 18 South Hebin Road, Dalian Dengshahe Coastal Industrial Zone, Jinzhou New District, Dalian, Liaoning Province, Tel: +86 0411 626 93145 Fax: +86 0411 626 93037 web: www.dsteel.com

Certificate No: MD00/4651/0001/3 Expiry Date: 11/01/2020

DONGBEI SPECIAL STEEL GROUP CO., LTD. Forgings carbon53.50 Dalian carbon-manganese 53.50 alloy 17.00 No. 18 South Hebin Road Jianzhou New District, Dalian, Liaoning Province Tel: +86 0411 626 93145 Fax: +86 0411 626 93037 web: www.dsteel.com Certificate No: MD00/4857/0001/3 Expiry Date: 11/01/2020 DONGFENG FORGING CO., LTD. Forgings carbon0.02 Wuhan carbon-manganese 0.02 alloy 0.02 7# Liaoning Road, Shiyan City Hubei Province Tel: +86 379 6407 6173 Fax: +86 379 6407 6206 email: [email protected] web: www.hnd.com Approved as sub-contractor and forging supplier for Henan Diesel Engine Industry Co., Ltd. only Certificate #: MD00/3502/0004/3 Expiry date: 24/07/2020 QB Stainless Steel Co., Ltd. Forgings carbon-manganese0.35 alloy 0.35 austenitic stainless 0.35 duplex stainless 0.35 martensitic stainless* 0.05 Zhouxia Industrial Park, Qindong Town, Dongtai City, Jiangsu Province, P.R.China Tel: +86 (0)515 85520679 Fax: +86 (0)515 85528688 Email: [email protected] Web: www.qbfastener.com Certificate No. MD00/4670/0001/3 Expiry date: 23/02/2020 ERZHONG () HEAVY EQUIPMENT CO., LTD Forgings carbon135.00 Wuhan carbon-manganese 135.00 alloy 80.00

Page 7 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office 460#, Zhujiang Xi Road, Deyang, Sichuan Province Tel: +86 838 2341754 Fax: +86 838 2340690

E-mail: [email protected] Website: www.china-erzhong.com

Certificate No: MD00/1334/0012/3 Expiry date: 18/11/2021 FIRMACO FLOURISH FORGING CO., LTD. OF INNER Forgings alloy0.08 Dalian MONGOLIA FIRST MACHINERY GROUP CORPORATION Min Zhu Road, Qing Shan District, BaoTou City, Inner Mongolia, Tel: +86 0472 3116744 email: [email protected] web: www.yifcdz.com Certificate No: MD00/4707/0001/3 Expiry Date: 04/09/2020 GUANGZHOU SHIPYARD CO.,LTD., Forgings carbon5.00 Guangzhou carbon-manganese 5.00 alloy 5.00 austenitic stainless 0.53 FOSHAN CASTING & FORGING FACTORY Pimgshen Zoom Pingzhou Nanhai Foshan Guangdong, 528251 Tel No: +86 757 88758521 Fax no: +86 757 88792797 email : [email protected] web: www.gzs.cssc.net.com Certificate No: MD00/4167/0002/3 Expiry Date 27/05/2019 HAI'AN WEISHI HEAVY MACHINERY CO., LTD Forgings carbon25.00 Nantong carbon-manganese 25.00 alloy 7.00 No. 199, Zhongba Road (S), Hai'an County, Jiangsu Province, Tel: +86 513 8877 3838 Fax: +86 513 8877 8866 Mobile: +86 13328080 560 Email: [email protected] Web: http://www.hawszj.com Certificate Number: MD00/4053/0002/3 Expiry: 10/07/2018

HANGZHOU STEAM TURBINE CASTING & FORGING CO LTD., Forgings carbon22.00 Zhoushan carbon-manganese 22.00 alloy 22.00 No.2 Road Tangqi Industrial Park, Hangzhou City, Zhejiang, 311106 Tel No. +86 571 890 23816 Fax: +086 571 890 23816

E-mail: [email protected]

Website: www.zjhtf.cn

Certificate No: MD00/3807/0002/3 Expiry Date: 08.08.2020 HENAN ZHONGYUAN SPECIAL STEEL Forgings carbon25.00 Wuhan carbon-manganese 25.00 alloy 25.00 EQUIPMENT MANUFACTURING Co., Ltd. Jiyuan City Henen Province P.C 454685 Tel: +86 (0)391 6099148 Fax: +86 (0)391 6099588 email: [email protected]. web http://www.zysw.cc Certificate #: MD00/3032/0006/3 Expiry date: 17/12/2021 Includes EAF/LF/VD steelmaking and ingots in above grades to 40 tonne. INNER MONGOLIA NO. 1 MACHINERY (GROUP) CO., LTD. Forgings carbon0.20 Wuhan carbon-manganese 0.20 alloy 0.20

Page 8 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Fucheng Forging Co., Ltd. Qingshan District Baotou City Inner Mongolia Tel: +86 379 6407 6173 Fax: +86 379 6407 6206 email: [email protected] web: www.hnd.com Approved as sub-contractor and forging supplier for Henan Diesel Engine Industry Co., Ltd. only without final heat treatment Including crankshafts with K factor > 1.05 for approved applications manufactured by the die forging process Certificate #: MD00/3498/0004/3 Expiry date: 24/07/2020

JIANGSU ASIAN STAR ANCHOR CHAIN Co., Ltd Forgings alloy3.60 Jiangyin Dongxing Town, 214533 Jiangsu Province Tel: +86 523 4686 808 Fax: +86 523 4681 390 Email: [email protected] Web: http://www.anchor-chain.com Certificate Number: MD00/1974/0003/3 Expiry: 30/06/2021 JIANGSU BOYUAN MACHINERY FORGING Co., Ltd. Forgings carbon1.35 Jiangyin carbon-manganese 1.35 alloy 1.35 Jiangan Town Industry Zone City Jiangsu Province Tel: +86 513 8759 6888 Fax: +86 513 8759 0008 Email: [email protected] Web www.jj-dz.com Certificate Number: MD00/4740/0001/3 Expiry date: 01/01/2021 JIANGSU HEAVY FORGING CO., LTD. Forgings carbon7.00 Nanjing carbon-manganese 7.00 alloy 7.00 austenitic stainless 0.75 duplex stainless 2.20 martensitic stainless* 2.00 Yinjiayuan Village, Huangqiao Town, City, Jiangsu Province, 225472 Tel: +86 (523) 87890355 Fax: +86 (523) 87898280 email: [email protected]

Certifdicate No: MD00/3572/0008/3 Expiry date: 12/03/2021

JIANGSU HONGSHENG HEAVY INDUSTRY GROUP CO., LTD. Forgings carbon13.00 Jiangyin carbon-manganese 13.00 alloy 13.00 No. 28 Xiejing Road Chengjiang Industry Park Jiangyin City Jiangsu Province, 214405 Tel: 0086 510 80665003, Fax: 0086 510 8627 9013 email: [email protected] www.hongshenghi.com Certificate #: MD00/3559/0004/3 Expiry date: 22/01/2021 JIANGSU HUAWEI MACHINERY MANUFACTURING CO., LTD. Forgings carbon16.00 Jiangyin carbon-manganese 16.00 alloy 16.00 99 Xiufu Road, , Jiangsu Tel No: + 00 86-515-86279977 Fax No: + 00 86-515-86279899 Email: Xcg_ [email protected] Website: www.jshwjx.mysteel.com.cn Certificate No. MD00/4727/0001/3 Expiry Date: 25/10/2020 JIANGSU JINYUAN HIGH-END EQUIPMENT CO., LTD. Forgings carbon12.80 Nanjing carbon-manganese 12.80 alloy 3.50 No. 8, Zhongguancun Road, City, Jiangsu Province Post Code: 213376 Tel: +86 519 87190508 Fax: +86 519 87191868

E-mail: [email protected]

Website: http://www.jinyuanforge.cn

Certificate Number: MD00/4025/0003/3 Expiry date: 14/05/2021

Page 9 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office JIANGSU LEAP MACHINE CO., LTD. Forgings carbon0.01 Nanjing carbon-manganese 0.01 alloy 0.01 Changli West Road No. 240 Huangtang Town Danyang City Jiangsu Province Tel: +86 511 86632504 Fax: +86 511 86634018 Email: [email protected] Web: http://www.leapmachine.com Certificate No.: MD00/3513/0004/3 Expiry date: 03/08/2020

JIANGSU SUNAN HEAVY MACHINERY Forgings carbon18.00 Jiangyin carbon-manganese 18.00 alloy 18.00 TECHNOLOGY CO LTD. Changqing Road Dongzhang, Xingang Town, Economic Development Zone, Jiangsu, Tel No: +86 (0) 512 5227 5923 Fax no: +86 (0) 512 5227 3689 email [email protected] Certificate No. MD00/3751/0004/3 Expiry date 05/03/2019 JIANGSU SUNAN HEAVY MACHINERY Forgings carbon108.00 Jiangyin carbon-manganese 108.00 alloy 62.00 TECHNOLOGY CO LTD. No.6 XingGang Road, Economic & Technology Development Zone, Changshu City, Jiangsu Province, Tel: +85 0512 52275923 Fax: +86 0512 51923689 email: [email protected]

Certificate No. MD00/4334/0002/3 Expiry Date: 09/06/2020 JIANGSU SUNSHINE FORGING Co. LTD Forgings carbon21.00 Jiangyin carbon-manganese 21.00 alloy 13.00 austenitic stainless 4.50 The Industrial Zone of Xueyan Town, Wujin District, Changzhou City, Jiangsu Tel: +86-519-86156369 Fax: +86-519-86159421

E-mail: [email protected]

Website: js-sunshine.com

Certificate No: md00/4580/0001/3 Expiry Date: 19/05/2019 JIANGYIN FANGYUAN RINGLIKE Forgings carbon12.00 Jiangyin carbon-manganese 12.00 alloy 12.00 FORGING & FLANGE Co., Ltd. No. 51 Sandun East Road, Town, Jiangyin, Jiangsu Province, PC 214423 Tel: +86 510 86902996 Fax: +86 510 86238859 email: [email protected] web: www.fangyuanforging.cn

Certificate #: MD00/3946/0003/3 Expiry date: 10/09/2020 JIANGYIN HENGRUN RING FORGING CO., LTD. Forgings carbon6.00 Jiangyin carbon-manganese 6.00 austenitic stainless 0.70 181, Zhuhuang Road, Zhutang Industrial Zone; Jiangyin, Jiangsu, PC 214415 Tel: +86 0510 86396655 or 7717 Fax: +86 0510 8639 6333 or 6868 Email: [email protected] Web: http://hengrun-forging.com Certificate Number: MD00/4203/0002/3 Expiry: 15/07/2019

JIANGYIN HUAXI FLANGE & PIPES FITTING Co., Ltd. Forgings carbon1.00 Jiangyin carbon-manganese 1.00 austenitic stainless 1.00

Page 10 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office No. 18 Xiaokang Road Huashi Town, Jiangyin Wuxi, Jiangsu Tel: +86 510 862 216551 Fax: +86 510 862 16560 web: www.flange.com.cn

Certificate No: MD00/4717/0001/3 Expiry Date: 28/09/2020

JIANGYIN NANGONG FORGING CO., LTD. Forgings carbon20.00 Jiangyin carbon-manganese 20.00 alloy 20.00 Jinnan Industrial Zone, Nanzha Town, Jiangyin City, Jiangsu Province, Tel: +86 510 861 80698 Fax: +86 510 861 84396 web: www.ngdz.net

Certificate No: MD00/4403/0002/3 Expiry Date: 02/11/2020 JIANGYIN TONGQING MACHINERY MANUFACTURE CO LTD Forgings carbon22.00 Jiangyin carbon-manganese 22.00 alloy 22.00 austenitic stainless 0.80 No. 18 Sandun East Road Zhouzhuang Town Jiangyin City Jiangsu Province 214423 Tel No: +86 0510 86239967 Fax No: +86 010 86906237 Mobile: +86 13395168625 Email: [email protected] Web : www.forgings.net.cn Certificate No. MD00/3685/0005/3 Expiry date 27/09/2021 JIANGYIN UNIQUE FLANGE MANUFACTURING CO., LTD. Forgings austenitic stainless0.20 Jiangyin No. 66 Haida Road, Huashi Town Jiangsu Province, 214421 Tel No 0086 510 86065399 Fax No 0086 510 86065799

Email: [email protected] Web : www.uniqueflange.com

Certificate No. MD00/4205/0002/3 Expiry date 20/07/2019

JIANGYIN ZENKUNG FORGING CO., LTD. Forgings carbon35.00 Jiangyin carbon-manganese 35.00 alloy 18.00 Xuxiang, Shuxin, Longsha Industrial Zone, Jiangyin, Jiangsu Province 214421, P.R. of China Tel: +86 510 8621 5929 Fax: +86 510 8621 8523 Email: [email protected] Web: http://www.zenkungforging.com Certificate Number: MD00/3774/0004/3 Expiry: 18/04/2019

JIANGYIN ZHONGNAN HEAVY INDUSTRIES CO., LTD. Forgings carbon0.50 Jiangyin carbon-manganese 0.50 austenitic stainless 0.50 788, Jinshan Road, High & New Technique Industries Development Zone Jiangyin City Jiangsu Province Tel: +86 (510) 86997071 Fax: +86 (510) 86996035 M +86 13706168395 Email: [email protected] Web: www.znhi.com.cn Certificate #: MD00/3439/0005/3 Expiry date: 29/02/2020 JIANLONG CO., LTD. Forgings carbon26.00 Dalian carbon-manganese 26.00 alloy 26.00 Fularji District Qiqihar City Heilongjiang Province Tel: +86 452 680 1271 Fax: +86 452 680 1234 email: [email protected] web: www.bg.bmsteel.com

Certificate No: MD00/4772/0001/1 Expiry date: 28/07/2020 JINGJIANG HENGYU CHEMICAL MACHINERY CO., LTD. Forgings carbon0.10 Jiangyin carbon-manganese 0.10 austenitic stainless 0.05

Page 11 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office East of Dunyi Bridge Xilai Town, Jingjiang City Jiangsu Province 214518 Tel: +86 523 82355688 Fax: +86 523 82355689 Email: [email protected] Web: http://www.jjhengyu.com Certificate #: MD00/4309/0002/3 Expiry date: 07/04/2020

JINLEI TECHNOLOGY CO., LTD. Forgings carbon50.00 Qingdao carbon-manganese 50.00 alloy 50.00 No. 18 Shuangyuan Street, Gangcheng District, City, Province, Tel: +86 634 6491299 Fax: +86 634 6492139 Certificate No: MD00/4849/0001/3 Expiry Date: 31/03/2022

LIAONING 518 INTERNAL COMBUSTION ENGINE Forgings carbon2.50 Dalian carbon-manganese 2.50 alloy 1.70 FITTING CO., LTD No. 97, North Ring Road, Dangdong City Liaoning Province Post Code: 118009 Tel: +86 415 6158090 Fax: +86 415 6158894 Mob: 138 4251 8850 email : [email protected] web : www.dd518c.com

Certificate #: MD00/3470/0008/3 Expiry date: 07/06/2020

Including crankshaft with K factor>1.0 for approved applications manufactured by TR process and alloy crankshafts up to 12T Approved for alloy forgings by closed die process up t0 445kgs

LIYANG JINKUN FORGING & MACHINING Co., Ltd Forgings carbon5.50 Nanjing carbon-manganese 5.50 alloy 5.50 No 388, North Kunlun Road, Liyang City 213300, Jiangsu Province, Tel: +86 0519 57386007 Fax: +86 0519 87336908 email; [email protected] web: www.jkforge.cn

Certificate No. MD00/4492/0002/3: Expiry Date: 22.06.2021

LUOYANG SHENGJIU FORGING Co., Ltd. Forgings carbon13.30 Wuhan carbon-manganese 13.30 alloy 13.30 Xueyuan Road, Luoxin Industry Park, Luoyang, Henan, Tel: +86-379-6519 0157 Fax: +86-379-6730 7619 email :[email protected] web: www.lyxql.com

Certificate No: MD00/4418/0002/3 Expiry Date: 14/01/2021 Approval covers open die forgings and ring rolling. LUOYANG XINGRONG INDUSTRIAL CO., LTD. Forgings carbon21.00 Wuhan carbon-manganese 21.00 alloy 20.00 Xiaodian, Ruyang County Henan Province Post Code: 471212 Tel: +86 15937917790 Fax: +86 379 68141083 Email: [email protected] Certificate #: MD00/3844/0004/3 Expiry date: 11/12/2019

NANJING AUTOMOTIVE FORGING CO., LTD. Forgings carbon0.03 Nanjing carbon-manganese 0.03 alloy 0.03 XiGang , Nanjing, 210033 tel: 86-25-58120048 Fax: 86-25-58120099 email; [email protected] web: www.njforge.com Certificate #: MD00/3290/0004/3 Expiry date: 02/12/2018

Page 12 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office NANJING BODA HEAVY FORGING CO., LTD. Forgings carbon34.00 Nanjing carbon-manganese 34.00 alloy 32.40 No. 500 Jiangqiao Liuhe District Nanjing City Jiangsu Province Tel No. +86 25 57066062 Fax No +86 25 5706 4783 Mob 0086 (0)152 5186 2382 Email: [email protected]@163.com Web www.asafor.com Cert No. MD00/3677/0005/3 Expiry date: 10/10/2021 NANJING INTERNATIONAL MARINE Forgings carbon0.13 Nanjing carbon-manganese 0.13 alloy 0.13 austenitic stainless 0.13 ferritic stainless* 0.13 martensitic stainless* 0.13 EQUIPMENT & SPARES LTD. (IMS) Nanjing Tel: +86 025 52695723 Fax: +86 025 52690499 email: [email protected] web: www.ims-hd.com * for approved applications Certificate #: MD00/3297/0005/3 Expiry date: 15/12/2021 NINGBO KAIRONG SHIP MACHINERY CO. LTD Forgings carbon0.01 Port carbon-manganese 0.01 austenitic stainless 0.01 Kairong No 86, Mould Road, Daqi Industry Park, Beilun Ningbo, 315806 Ningbo Kairong Machinery Co Ltd, No, Mould Road, Daqi Industry Park, Beilun Ningbo, 315806, China Tel: 057486111777 Email: [email protected] www.kairong.com.cn Certificate No: MD00/4375/0002/3 Expiry date: 20/08/2020 QILU SPECIAL STEEL CO.,LTD. Forgings carbon18.00 Qingdao carbon-manganese 18.00 alloy 18.00 29 North of Jiuguan Fly-Over Bridge, Yanzhou City, Shandong Province Tel: +86 (0)537 3413 720 Fax: +86 (0)537 3417 064 Email: [email protected] Web: http://qilutegang.cn Certificate No. MD00/4864/0001/3 Expiry date: 14/05/2022

SHANDONG IRAETA HEAVY INDUSTRY STOCK Co., Ltd. Forgings carbon3.30 Qingdao carbon-manganese 3.30 alloy 2.20 austenitic stainless 0.30 No. 9001 Jiwang Road Zhangqiu, Jinan, Tel: +86 531 83800992 Fax: +86 531 83809527 email: [email protected] web: www.shandongiraeta.cn

Certificate No: MD00/4425/0002/3 Expiry Date: 27/01/2021 SHANDONG RUIYE FLANGE Co. LTD Forgings carbon0.40 Qingdao carbon-manganese 0.40 Renjia Industrial Area, Guanzhuang, Zhangqui City, Shandong Province. 250217. Tel: + 86-531-83800366 Fax. 86-531-83807366 E-mail: [email protected]

Website: www.ryflange.com

Certificate No: MDOO/4603/0001/3 Expiry Date: 15/08/2019

Page 13 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office SHANDONG TAISHAN NUCLEAR POWER EQUIPMENT Forgings carbon30.00 Qingdao carbon-manganese 30.00 alloy 30.00 MANUFACTURING CO., LTD. Beicun, Shankou Town Daiyue District Taian City Shandong Province Tel: +86 538 8611782 Fax: +86 538 8611063 Email mailto: [email protected] Web tttp://www.skduanya.com Certificate No. MD00/3765/0004/3 Expiry Date: 05/04/2019 SHANDONG WANGDA Forgings carbon0.10 Qingdao carbon-manganese 0.10 FORGING AND PRESSING CO., LTD Baijia, Linchi Town, Zouping, Tel No: +86 531 838 68889 Fax No: +86 531 838 62247 Email: [email protected] Web: www.sdwanda.com Certificate No: MD00/4312/0002/03 Expiry date: 22/04/2020 SHANGHAI ALAFA MARINE EQUIPMENT CO., LTD. Forgings carbon0.15 Zhoushan austenitic stainless 0.15 Wangzha Area, Standard Workshop of Longwan Distric Wenzhou City Zhejiang Province Tel: +86 577 869955555 Fax: +86 574 86838000

E-mail: [email protected]

Certificate No : MD00/3132/0006/3 Expiry date: 28/01/2020

SHANGHAI ELECTRIC SHMP CASTING & FORGING CO., LTD. Forgings carbon100.00 Shanghai Port carbon-manganese 100.00 alloy 100.00 1800 Jiangchuan Road Minhang District Shanghai 200245 Tel: +86 21 34098660 Mob: +86 1891 780 4183 email [email protected] web: www.sshanghai-electric.com

Including steelmaking and semi-built crankshafts Certificate #: MD00/1345/0009/3 Expiry date: 09/04/2020 SHANGHAI HUDONG FORGING PLANT CO., LTD. Forgings carbon8.00 Shanghai Port carbon-manganese 8.00 alloy 4.00 South Xinyuan Road 55 Nanhui Lingang Heavy Industry Zone 201306 Tel:+86 21 60450281 Fax: +86 21 60450283 email [email protected]

Certificate #: MD00/2892/0008/3 Expiry date: 09/05/2021 SHANGHAI JIAODA CHUKYO FORGING & STAMPING CO LTD Forgings carbon0.01 Shanghai Port carbon-manganese 0.01 alloy 0.01 No. 508 Fengyong Road Qingcun Town, Fengxian District, Shanghai Tel no +86 21 57560990 ext 244 Fax No +86 2157568855 email: [email protected] web: www.jd-forging.com Certificate Number: MD00/3726/0004/3 Expiry: 03/01/2022

SHANGHAI SHENJIANG FORGING CO LTD Forgings carbon2.60 Shanghai Port carbon-manganese 2.60 alloy 2.10 No. 200 Jiefangdaoxihuan Road, Shanghai 201812, Tel no. +86 21 5913 5190 Fax No. +86 21 6913 4332 email : [email protected] web: www.sjforging.com Certificate No MD00/3790/0003/3 Expiry date: 05/06/2017

Page 14 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office FORGING PLANT Forgings carbon0.45 Wuhan carbon-manganese 0.45 alloy 0.45 Nanliang Town, Yicheng County Shanxi Province Tel: +86 379 6407 6173 Fax: +86 379 6407 6206 email: [email protected] Approved as sub-contractor and forging supplier for Henan Diesel Engine Industry Co., Ltd. only Including crankshafts with K factor > 1.05 for approved applications manufactured by the die forging process Certificate #: MD00/3501/0004/3 Expiry date: 24/07/2020 SHANXI GUANJIAYING FLANGE FORGING CO., LTD. Forgings carbon2.00 Dalian carbon-manganese 2.00 alloy 2.00 austenitic stainless 2.00 duplex stainless* 2.00 Guanjiaying Industry Zone Dingxiang County Shanxi Province 035404 Tel: +86 350 6086464, 13753025606 Fax: +86 350 6086462 Email mailto: [email protected] Certificate #: MD00/3494/0003/3 Expiry date: 07/04/2017 SHANXI TAIGANG STAINLESS STEEL CO., LTD. Forgings carbon12.00 Dalian carbon-manganese 12.00 alloy 12.00 Section Steel Plant, No.2 Jian Caoping Street, City, Shanxi Province, Tel: +81 (0)351 2130108 Fax: +81 (0)351 2317595

E-mail: [email protected]

Website:tisco.com.cn Certificate No. MD00/4240/0003/3 Expiry Date: 14/10/2019.

Approved for semi finished forged bars to 400mm maximum diameter in C, C-Mn, Alloy, Austenitic and Duplex Stainleee Steel.

SHI GANG JING CHENG EQUIPMENT DEVELOPMENT Forgings carbon60.00 Dalian carbon-manganese 60.00 alloy 38.00 AND MANUFACTURING CO., LTD. No. 1 Xinlian Street, , Liaoning Province, Tel: +86 0417 3257800 Fax: +86 0417 3257905 email: [email protected] web: http://www.cyedm.com.cn Certificate #: MD00/4234/0005/3 Expiry date: 08/10/2019 SICHUAN LIUHE FORGING CO., LTD. Forgings carbon6.00 Wuhan carbon-manganese 6.00 alloy 6.00 Baolun Road(W), Henan Industrial Park City Sichuan Province Tel No: +86 0816 3521518 Fax No: +86 0816 3521518 email: [email protected] web: www.6hdz.com Certificate No: MD00/4176/0002/3 Expiry date 08/06/2019 SINOMA SCIENCE & TECHNOLOGY (JIUJIANG) CO., LTD. Forgings alloy0.08 Wuhan No. 138 Renmin Road Ruichang Jiangxi Tel No: 00-86 792-4221-470, Fax No. 00-86-792-4229-759

E-mail: [email protected]

Cert No. MD00/4473/0003/3 Expiry date: 21/04/2021

Approved for seamless gas cylinder with the diameter of 267mm, thickness 6mm to ISO9809-1 for approved application

SUZHOU BAOFORGING CO., LTD. Forgings carbon25.90 Shanghai Port carbon-manganese 25.90 alloy 25.90

Page 15 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Anmin Road, Panyang Industrial Park Huangdai Town, Xiangcheng District City Jiangsu Province 215152 Tel: +86 0512 65085970 Fax: +86 0512 65085933 email: [email protected] web: www.baoforging.cn Certificate No.: MD00/4429/0002/3 Expiry date: 30/01/2021

SUZHOU CITY HONGSHENG FORGING CO., LTD. Forgings carbon3.00 Shanghai Port carbon-manganese 3.00 alloy 3.00 No.8, Yinzang Rd, Linhu Town , Suzhou, Jiangsu Province Tel No. +86 512 6695 0087 Fax No. +86 512 6653 3869 Mob 13862015218 Email: [email protected] Web www.hsspecialsteel.com Certificate No. MD00/4179/0001/3 Expiry Date 10/06/2016 TAI YUAN HEAVY INDUSTRY CO. LTD. Forgings carbon120.00 Wuhan carbon-manganese 120.00 No.53, Yuhe Street, , Taiyuan City, Shanxi Province, 030024, Tel: +86 351 636 6770 Fax: +86 351 636 6750

Email: [email protected]

Web: http:\\www.tyhi.com.cn Certificate #: MD00/3412/0006/3 Expiry date: 30/09/2019 TAIZHOU PINGSHUN FORGING Co. LTD Forgings carbon0.06 Jiangyin austenitic stainless 0.03 No. 1 Renmin Road, Yuduo Town, , Taizhou City, Jiangsu Provence. Tel: + 86-0523-88641085 Fax: + 86-0523-88647999 E-mail: [email protected]

Certificate No. MD00/4607/0001/3 Expiry Date: 25/08/2019 TAIZHOU SANLI PIPE FITTING CO., LTD. Forgings carbon0.15 Jiangyin carbon-manganese 0.15 Yuduo Industrial Park Taizhou City Jiangsu Province Tel: +86 523 8864 6888 Fax: +86 523 8864 6999 Email: [email protected] The scope of approval is restricted to forged flanges. Certificate Number: MD00/4093/0003/3 Expiry: 18/11/2021

TIANJIN FEB 7th CONCORD CRANKSHAFT CO., LTD., Forgings carbon12.54 Qingdao carbon-manganese 12.54 alloy 12.54 No.649, Jintang Road, Tianjin 300301 Tel No: +86 22 24358008 Fax No: +86 22 24358008 Email: [email protected] Web:www.kangkude.com Certificate No: MD00/3920/0003/3 Expiry date 05/06/2020 TIANJIN SERI MACHINERY EQUIPMENT CO., LTD. Forgings carbon30.00 Qingdao carbon-manganese 30.00 alloy 30.00 No. 3, Heavy Industrial Road Heavy Industrial Park Dongli District Tel:+86 (0)22 24943033 Fax: +86(0)22 24943033 Certificate #: MD00/4423/0001/3 Expiry date: 26/01/2018 TIANJIN TIANZHONG GIANT HEAVY INDUSTRY CO., LTD. Forgings carbon60.00 Qingdao carbon-manganese 60.00 alloy 14.00

Page 16 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office No. 609, Jinyu Road Xiditou Town Beichen District Tianjin Tel:+86 (0)22 86885730 Fax: +86(0)22 8688 5673

emsil: [email protected] web: www.jiangtian.cn

Certificate #: MD00/4094/0004/3 Expiry date: 23/11/2021

TIANJING TIANHAI HIGH PRESSURE CONTAINER CO. LTD. Forgings alloy0.18 Qingdao Small Line No. 268 Jinbin Road Tianjin Port Free Trade Zone Tel: +86 22 59816618 Fax: +86 22 59816630 Email: [email protected] Web: www.btic.cn

Certificate No. MD00/4343/0001/3 Expiry date: 20/06/2017 Approved for forged seamles gas cylinder with the diameter of 89mm to 219mm, thickness 2.4mm to 14.3mm for approved application

TIANJING TIANHAI HIGH PRESSURE CONTAINER CO. LTD. Forgings alloy0.32 Qingdao 406 LINE No 306 Xingang Road, Tianjin Port Free Trade Zone Tianjin Tel: +86 22 59816618 Fax: +86 22 59816630 Email: [email protected] Web: www.btic.cn Approved for forged seamles gas cylinder with the diameter of 219mm to 270mm, thickness 5.2mm to 14.2mm for approved application Certificate No. MD00/4405/0002/3 Expiry date: 01/10/2017

TIANMA () RAILWAY BEARING CO., LTD Forgings carbon30.00 Wuhan carbon-manganese 30.00 alloy 30.00 No. 143, Xia Street (N), Chengxiang Town, Qingbaijiang District, Chengdu City , Sichuan Province. P.C. 610306 Including steelmaking by EAF and ingot production maxm 40T

Tel: +86 15718028399/13693478848 Fax: +86 2883632851

Email: [email protected] Web http://www.cdtmb.com

Certificate No. MD00/4173/0003/3 Expiry date: 03/06/2016

TIANRUN CRANKSHAFT CO., LTD. Forgings carbon0.30 Qingdao carbon-manganese 0.30 alloy 0.30 Numbers 1 and 2 Forging Workshops No. 2 - 13 Tianrun Road Wendeng City Shandong Province Tel: +86 631 898 2033 Fax: +86 631 845 1761 eail: [email protected] web: www.tianrun.com Approved for close die forging process only. Approval including die forged crankshaft with the above maximum forged weight.

Certificate Number: MD00/4015/0003/3 Expiry: 07/01/2022

TIANRUN CRANKSHAFT CO., LTD. Forgings carbon4.00 Dalian carbon-manganese 4.00 alloy 4.00 Nanhai Forging Workshops No. 2-13 Tianrun Road el: +86 631 898 2033 Fax: +86 631 845 1761 eail: [email protected] web: www.tianrun.com The scope of approval includes solid forged crankshafts to the above maximum forged weight. Certificate Number: MD00/4556/0002/3 Expiry: 27/02/2022 TONGYU HEAVY INDUSTRY Co., Ltd Forgings carbon151.00 Qingdao carbon-manganese 151.00 alloy 121.00 National High-Tech Industry Area, Yucheng City, City, Shandong Province, Tel: +86 534 7520690 Fax: +86534 7521470 email: [email protected] web: www.tongyuheavy.com Certificate No. MD00/3998/0005/3 Expiry date: 27/02/2021

Page 17 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office WUHAN HEAVY INDUSTRY Forgings carbon70.00 Wuhan carbon-manganese 70.00 alloy 75.00 CASTING AND FORGING CO., LTD. 1 Wudong Street Qingshan District Wuhan Hubei Tel: +86 27 6886 1813 Fax: +86 27 6886 1810 Email wh471zg.com.cn Web www.whzg.com.cn Including crankshafts with K factor > 1.0 for approved applications Including steelmaking and semi-built crankshafts (max. throw weight 12 tonnes) Certificate #: MD00/1681/0015/3 Expiry date: 02/04/2020 WUHAN ZHONGYE MACHINERY WHOLE SET EQUIPMENT Forgings carbon15.00 Wuhan carbon-manganese 15.00 alloy 15.00 Gourp Co., Ltd. DAYE BRANCH Lingcheng Road No. 2 Lingxiang Town, Daye City Hubei Province Tel: +86 0714 370 2019 Fax: +86 0714 370 2196 Email : [email protected] Certificate #: MD00/4242/0001/3 Expiry date: 28/10/2016

WUHAN ZHONGYE YANGLUO HEAVY MACHINERY Forgings carbon6.50 Wuhan carbon-manganese 6.50 alloy 6.50 MANUFACTURING CO., LTD. Yangfa North Road No. 3 Yangluo Economic Development Zone Wuhan Tel: +86 27 5131 8405 Fax: +86 27 5131 8350 Email : [email protected] Certificate #: MD00/4248/0001/3 Expiry date: 29/10/2016

WUXI BAOLU HEAVY INDUSTRY CO., LTD. Forgings carbon11.00 Jiangyin carbon-manganese 11.00 alloy 11.00 The industry center of Qianzhou Wuxi, Jiangsu, 214181 Tel +86 510 82239288 Fax +86 510 82255521 Email: [email protected] Web: www.wxfoundry.com Certificate Number MD00/4487/0002/3 Expiry date 02/06/2021 WUXI HONGDA HEAVY FORGING CO., LTD. Forgings carbon8.00 Jiangyin carbon-manganese 8.00 alloy 8.00 Rengang Nanquan Binhu Town , Wuxi City Jiangsu Province Tel no. +86 510 85390713 Fax No. +86 510 85953536 email: [email protected] Cert No. MD00/4601/0001/3 Expiry date 03/08/2019 WUXI JIAYI FORGING CO., LTD. Forgings carbon0.01 Jiangyin carbon-manganese 0.01 alloy 0.01 No.88 Xinguang Road, Xin Ming Village, Xibei Town Xishan District, Wuxi City, Jiangsu Province, Tel: +86 0510 8392 2888 email: [email protected] web: www.jy-forging.com

Certificate No: MD00/4832/0001/3 Expiry Date: 09/01/2022

WUXI PAIKE NEW MATERIALS TECHNOLOGY Co. Ltd. Forgings carbon20.00 Jiangyin carbon-manganese 20.00 alloy 20.00 Lianhe Road Hudai Industry Park Wuxi City Jiangsu Province, 214161 Tel no. +86 510 85585219 Mob. +86 18915289513 Fax No. +86 510 85585239 email: [email protected] web: www.wuxipaike.com Cert No. MD00/3735/0005/3 Expiry date 23/01/2022

Page 18 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office WUXI XINGDA PETRO CHEMICAL FITTINGS Co., Ltd. Forgings carbon12.00 Jiangyin carbon-manganese 12.00 alloy 12.00 austenitic stainless 2.70 Longyan Village, Hudai Town, Binhu District, Wuxi City, Jiangsu (214064) Tel: +86-519-8615 Fax: +86-519-8615 1615 email:[email protected] http://www.wxxingda.com/

Certificate No: MD00/4515/0001/3 Expiry Date: 06/10/2018

XINING SPECIAL STEEL CO., LTD. Forgings carbon16.00 Wuhan carbon-manganese 16.00 alloy 16.00 No. 52 Chaidamu West Road Xining Qinghai Province, 455004 Tel: 0086 0971 529 9407 Fax: 0086 0971 529 9248 Email: [email protected] Web: www.xntg.com Certificate #: MD00/3093/0003/1 Expiry date: 10/03/2019 ROTHE ERDE SLEWING BEARING CO., LTD. Heat treatment and machining alloy7.50 Nanjing of forgings 15 Luoshan Road, Xuzhou Economic Development Zone, Xuzhou, Jiangsu Province 221004, The scope of approval refers to the finish machining and induction surface hardening of ring bearings

Tel: +86-516-8798-9850 Fax: +86-516-8798-9946

Website: www.xreb.com

Certificate No.: MD00/4088/0003/3 Expiry Date: 06/11/2021 YADA PIPING SOLUTION CO., LTD. Forgings carbon0.30 Shanghai Port carbon-manganese 0.30 austenitic stainless 0.30 duplex stainless 0.30 Xingfeng Industry Park, Jiaxing City Zhejiang Tel: +86 573 8312 7999 Fax: +86 573 8312 7155 email: [email protected] web: www.cnyada.net Certificate No. MD00/4112/0005/3 Expiry Date: 18/01/2022 YANCHENG HAITE MACHINERY TECHNOLOGY CO., LTD. Forgings carbon0.03 Jiangyin carbon-manganese 0.03 alloy 0.03 austenitic stainless 0.03 No. 999, Jianbao Road, Jianhu County, Yancheng City, Jiangsu Province, 224700 Tel: +86 0515 86290308 Fax: +86 0515 86292188 email: [email protected] web: www.cnhaite.com Certificate No. MD00/4543/0002/3 Expiry Date: 11/01/2022 Heat treatments are sub-contracted. YANCHENG RUI YE HYDRAULIC PIPE FITTINGS CO., LTD. Forgings carbon0.26 Jiangyin carbon-manganese 0.26 austenitic stainless 0.02 Shanggang Industrial Park Jianhu County Yancheng City Jiangsu Province 224711 Tel No: +86 515 864 20999 Fax No: +86 515 864 13333 Email: [email protected] Web: http://www.ycrgj.com Cert No: MD00/4327/0002/3 Expiry Date 27/05/2020

Page 19 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office CHENGDE HEAVY INDUSTRIES CO., LTD. Forgings carbon18.00 Nanjing carbon-manganese 18.00 alloy 18.00 No. 1 Sanjiang Avenue, Yanjiang Economic Development Zone, Jiangdu, Jiangsu, Tel: +86 514 8643 2873 Fax: +86 514 8643 2738 email: [email protected] www.chengdezg.com Certificate No: MD00/4741/0001/3 Expiry Date: 03/01/2021 YICHANG MARINE DIESEL ENGINE CO. LTD. Forgings carbon0.50 Wuhan carbon-manganese 0.50 alloy 0.50 93 Xiling No. 2 Road Yichang City Hubei Province 443002 Tel: +86 717 646 8870 Fax: +86 717 646 8870 Email: [email protected] Web page: www.ymd.com.cn Certificate #: MD00/1691/0008/3 Expiry date: 14/05/2016

YIXING WANHUA FLANGE FORGING CO., LTD. Forgings carbon0.80 Jiangyin carbon-manganese 0.80 alloy 0.80 austenitic stainless 0.80 Wanshi Town Industrial South Centralized Zone Yixing City Jiangsu Tel No. +86 510 87844555 Email: [email protected]

Certificate No. MD00/4561/0002/3 Expiry date 28/03/2022 DESHENG FORGING CO.,LTD. Forgings carbon18.00 Jiangyin carbon-manganese 18.00 alloy 18.00 austenitic stainless 3.00 No. 3 Xingyu West Road Hexing, Jinfeng Town Zhangjigang City Jiangsu Province 215626 Tel: +86 512 585 15780 Fax: +86 512 858 15082 Email to: [email protected] Web: http://www.dsforging.com Certificate Number: MD00/4486/0002/3 Expiry: 25/05/2021

ZHANGJIAGANG GUANGDA SPECIAL MATERIAL Co., LTD Forgings carbon8.00 Jiangyin carbon-manganese 8.00 alloy 8.00 Anqing Village, Fenghuang Town, Zhangjiagang City, Jiangsu Province. Tel: 0512-58390270 Fax: 0512-58456318

E-mail: [email protected]

Website: www.gdjxdz.net

Certificate No: MD00/4690/0002/3 Expiry Date: 18.06.2020 ZHANGJIAGANG HAIGUO NEW ENERGY EQUIPMENT Forgings carbon16.50 Jiangyin carbon-manganese 16.50 alloy 7.50 austenitic stainless 2.50 MANUFACTURING CO., LTD. No. 11 Jinfeng Road Nanfeng Industry Zone Zhangjiagang, Jiangsu, 215628 Tel: +86 0512 58903388 Fax: +86 0512 58903383 Email: [email protected] Web: www.zjghgdj.com Certificate #: MD00/4609/0002/3 Expiry date: 11/09/2019

ZHANGJIAGANG HENGTONG ANNULAR FORGING Forgings carbon8.00 Jiangyin carbon-manganese 8.00 alloy 8.00 austenitic stainless 2.00 duplex stainless 3.50

Page 20 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office MANUFACTURE Co. LTD. No. 3 Feixiang Road Fenghuang Town, Zhangjiagang Jiangsu Province Tel No. +86 0512 58331214 Fax No: +86 0152 58332696 Email: [email protected] Certificate No. MD00/4155/0003/3 Expiry date 27/04/2019

ZHANGJIAGANG HUARI FLANGE CO., LTD. Forgings carbon0.08 Jiangyin carbon-manganese 0.08 alloy 0.08 austenitic stainless 0.08 No. 44 East Baixiong Road Jinfeng Town Zhangjiagang City Tel: +86 512 585 38981 Fax: +86 512 585 70069 Mob +86 18662635959 Email: [email protected] Web: http://www.hrflange.net.cn Heat treatment now undertaken in-house. Certificate Number: MD00/3170/0006/3 Expiry date: 25/06/2020

ZHANGJIAGANG ZHONGHUAN HAILU Forgings carbon3.00 Jiangyin carbon-manganese 3.00 alloy 3.00 SPECIAL FORGINGS CO. , Ltd. Hexing Huashan Road Tel: +86 0512 56913102 Fax: +86 0512 58511337 Email: [email protected] Web: www.hlduanjian.com Certificate #: MD00/3546/0004/3 Expiry date: 04/12/2020

ZHANGQIU CITY SHENGLI FORGING CO., LTD. Forgings carbon0.07 Qingdao carbon-manganese 0.07 Dongzhao Village Industrial Park, Puji Town, Zhangqiu City, Shandong Province, 250206 Tel: +86 531 83861504 Fax: +86 531 83879698 Email: [email protected] Web site: http://www.slflanges.com Certificate No.: MD00/4667/0001/3 Expiry Date: 02/03/2020 ZHEJIANG JINDUN PRESSURE VESSEL CO., LTD. Forgings alloy0.11 Zhoushan Xiaoyue Town Shangyu City Zhejiang Province 312367 Tel: +86 (0)575 82717268 Fax: +86 (0)575 872717268 Mob: +86 13567563172 email: [email protected] web: www.jindun.cc Approved for Seamless Steel Gas Cylinders in accordance with EN 1964-1 and ISO 9809-1 only. Certificate #: MD00/3397/0004/3 Expiry date: 09/12/2019

ZHEJIANG JIULI HI-TECH METALS CO., LTD. Forgings austenitic stainless0.50 Shanghai Port Jiuli Stainless Steel Industrial Park, Balidian Town, Wuxing District, Huzhou City, Zhejiang Province +86 572 253 9530 Fax: +86 572 253 9396 email: [email protected] web: www.jiuli.com

Certificate No: MD00/4723/0001/3 Expiry Date: 17/10/2020

ZHEJIANG YUEJIN MACHINE Co., LTD Forgings carbon0.02 Shanghai Port carbon-manganese 0.02 alloy 0.02 No. 269, Changhong Dong Road, Wukang, Deqing. Zhejiang. 313200. Tel: +86 572-8822478 Fax: +86 572 8822488

E-mail: [email protected]

Website: www.chinayujin.com Certificate No: MD00/4747/0001/3 Expiry Date: 06/03/2021 thyssenkrupp rothe erde (Xuzhou) Ring Mill Co., Ltd. Forgings carbon8.00 Nanjing carbon-manganese 8.00 alloy 7.50 No. 6 Luoshan Road, Xuzhou Economic Development Zone, 221004, Jiangsu, Tel: +86 516 8798 0103 Fax: +86 516 8798 8090 Mob +86 15365883071 Email: [email protected] Web: www.xrem.cn Certificate Number: MD00/3907/0005/3 Expiry date: 24/04/2020

Page 21 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Czech Republic

BOHEMIA RINGS s.r.o. Forgings carbon6.50 Prague carbon-manganese 6.50 alloy 6.50 Zámrsk 10 565 43 Zámrsk Tel: +420 465 481 285 Fax:+420 465 481 137 Email: [email protected] Website: http://www.forge-europe.com Certificate No.: MD00/4666/0002/3 Expiry date: 02/03/2020 CZECH PRECISION FORGE A.S. Forgings carbon3.50 Prague carbon-manganese 3.50 alloy 3.50 austenitic stainless 3.50 Tylova 1/57 301 00 Plzen Tel: +420 378 133 802 Fax: +420 378 132 516 email: [email protected] web www.cpforge.com Corporate address: Husova 242/9, 110 00 Prague 1 Certificate #: MD00/3049/0006/3 Expiry date: 03/02/2022 HF-Czechforge s.r.o. Forgings carbon0.01 Prague carbon-manganese 0.01 alloy 0.01 Prumyslovy park 13 350 02 Cheb

Tel: +420 354 414 511 Fax: +420 354 415 599 email to: [email protected] web: www.hammerwerk.cz

Certificate No.: MD00/4797/0001/3 Expiry Date: 06/08/2021 PILSEN STEEL s.r.o. Forgings carbon125.00 Prague carbon-manganese 125.00 alloy 125.00 Tylova 1/57 316 00 Plzen Tel: +420 378 134 225 Mob: +420 603 587 246 email: [email protected] web: www.pilsensteel.cz Certificate #: MD00/1383/0006/3 Expiry date: 22/03/2020 VITKOVICE HAMMERING a.s. Forgings carbon8.00 Prague carbon-manganese 8.00 alloy 8.00 Ruska 2887/101, 703 00, Ostrava - Vítkovice Tel No: +420 595 956 687 Fax No: +420 595 954 540

E-mail: [email protected]

Website: www. vitkovice.cz Certificate No. MD00/4165/0003/3 Expiry date: 21/05/22 VITKOVICE HEAVY MACHINERY a.s. Forgings carbon70.00 Prague carbon-manganese 70.00 alloy 70.00 Ruska 2887/101 70300 Ostrava-Vitkovice Tel: +420 595 953 153 Mob: +420 602 535 608 email: [email protected] web: www.vitkovice.cz

Certificate #: MD00/2020/0010/3 Expiry date: 29/03/2020

Including steelmaking, combined web and pin crankshafts and semi built crankshafts by die forge method up to 4 Tonne.

ZDAS a.s. - Metallurgy Division Forgings carbon10.00 Prague carbon-manganese 10.00 alloy 10.00 Metallurgical Plant Strojirenska 675/6 59101 Zdar nad Sazavou Tel: +420 566 643 998 Mobile: +42 602 795 859 Email: mailto:[email protected] Web:http://www.zdas.cz Including steelmaking. Certificate #: MD00/1697/0008/3 Expiry date: 23/08/2020

Page 22 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office ZVU KOVÁRNA a.s. Forgings carbon2.00 Prague carbon-manganese 2.00 alloy 2.00 (ZVU Forge Plant Ltd.) Prazska Trida 322/4 P.O. Box 21 501 47 Hradec Kralove Tel: +420 495 822 375 Fax: +420 495 822 806 Mob: +420 604236105 Email: [email protected] Web: www.kovarna.cz Certificate #: MD00/2295/0008/3 Expiry date: 01/03/2020

Finland

KOMAS OY TAKOMO Forgings alloy2.50 Turku/Åbo Onkapannu 4, 40700 Jyväskylä Tel: +358 40 734 2786 email: [email protected] web: www.komas.fi Certificate No MD00/4523/0002/3 Expiry Date: 21/10/2021

Approved for the supply of forged blanks for the maufacture of gearing. Not approved for final heat treatment or surface hardening treatments.

France

AKERS FRANCE Forgings carbon70.00 Lyon carbon-manganese 70.00 alloy 70.00 USINE DE THIONVILLE Chemin du Leidt B.P. 10200 57104 Thionville Cedex Including steelmaking Tel: +33 6 79 27 94 41 e mail: mailto:[email protected] web: http://www.akersrolls.com Certificate #: MD00/3386/0005/3 Expiry date: 26/05/2017

ANDRÉ LAURENT Forgings carbon0.03 Lyon carbon-manganese 0.03 alloy 0.03 martensitic stainless* 0.03 ZI du Bayon - BP 27 42150 La Ricamarie Tel No.0033 (0) 4 77593280 Fax No. 0033 (0) 4 77806264

E-mail: [email protected]

Website: www.andre-laurent.fr Cert No. MD00/3646/0005/3 Expiry date: 12/12/2019 ATELIERS DES JANVES Forgings carbon0.01 Lyon carbon-manganese 0.01 alloy 0.01 Z.I. de Braux Avenue des Marguerites B.P. 44 08120 Bogny-sur-Meuse Tel: +33 324 53 9482 Fax: +33 324 32 0207 Email: maitlto:[email protected] Web: http://www.ateliers-janves.fr Certificate #: MD00/2869/0006/3 Expiry date: 30/03/2020

AUBERT & DUVAL Forgings carbon45.00 Lyon carbon-manganese 45.00 alloy 45.00 austenitic stainless 25.00 duplex stainless* 22.00 Firminy Plant BP 141 42704 FIRMINY CEDEX Tel: +33 4 77 40 37 41 Email [email protected] Website: http://www.aubertduval.com *Accepted for approved applications. Certificate Number: MD00/1770/0010/3 Expiry: 23/09/2021

Page 23 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office AUBERT & DUVAL Forgings carbon20.00 Lyon carbon-manganese 20.00 alloy 20.00 austenitic stainless 20.00 Aciéries des Ancizes BP 1 63770 Les Ancizes Tel: +33 4 73 67 31 27 email: [email protected] www.aubertduval.com Certificate No: MD00/4537/0001/3 Expiry Date: 21/12/2018

BECK TECHNOLOGIES S.A.S Forgings austenitic stainless0.01 Lyon La Chaudeau BP 10 70320 Aillevillers Tel: +33 3 84 49 90 02 Email: [email protected].

Certificate #: MD00/4274/0002/3 Expiry date: 28/12/2019 COUSIN MALICET Forgings carbon0.20 Lyon carbon-manganese 0.20 23 Rue Bernisseaux 08120 Bogny sur Meuse Tel: +33 3 24 37 15 15 Fax: +33 324 323040 Contact: Fabien Frere Email: [email protected] Website: www.beck-industries.com Certificate #: MD00/4189/0002/3 Expiry date: 24/06/2019

FORGE DE CUSTINES ET DE TRIE-CHÂTEAU Forgings carbon1.21 Lyon carbon-manganese 1.21 alloy 0.30 austenitic stainless 0.30 martensitic stainless* 0.23 Usine de CUSTINES 208, Boulevard de Finlande, 54670 CUSTINES, Tel: +33 3 83 49 49 56 Mob: +33 6 32 06 15 74 email: [email protected] web: www.lebronze-alloys.com

Certificate No: MD00/4639/0001/3 Expiry No:02/09/2019

FORGITAL DEMBIERMONT S.A.S. Forgings carbon45.00 Lyon carbon-manganese 45.00 alloy 45.00 austenitic stainless 45.00 4, Rue Jules Campagne BP 89 59330 Hautmont Tel: +33 3 2769 7581 Fax: +33 3 2769 7345 email: [email protected] web: www.forgital.com Certificate #: MD00/0527/0008/3 Expiry date: 04/08/2020 GASCARD MARTIN PROST Forgings alloy0.01 Lyon BP1 1, Chemin de Vivet 52360 NEUILLY L'EVEQUE Tel: +33 3 25 84 00 16 Fax: +33 3 25 90 37 35 Email: [email protected] Certificate No: MD00/4428/0001/3 Expiry date: 29/01/2018 Approved for close die forging with the maximum weight of 1.4kg only

L'UNION DES FORGERONS Forgings carbon0.30 Lyon carbon-manganese 0.30 alloy 0.30 austenitic stainless 0.30 12 Rue De La Pierre Follège BP 16 - Z.A. 91660 Méréville Tel: +33 (0) 1 64 95 02 25 email: [email protected] web: www.union-des-forgerons.fr Certificate #: MD00/3229/0005/3 Expiry date: 22/03/2021 LEBRONZE ALLOYS Forgings alloy0.45 Lyon Usine de Dangu 27720 Dangu Tel: +33 3 2769 7581 Fax: +33 3 2769 7345 Email mailto:[email protected] Web: www.forgital.com Certificate No: MD00/4102/0003/3 Expiry date: 13/12/2020

Page 24 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office LOIRE INDUSTRIE SAS Forgings carbon1.00 Lyon carbon-manganese 1.00 austenitic stainless 1.00 duplex stainless 1.00 ZI Le Clos Marquet 2 rue Michel Rondet, BP 47 42406 SAINT CHAMOND CEDEX Tel: + 33 (0) 477 292 000 Fax: +33 (0) 477 226 321 E-mail: [email protected]

Website: www.loire-industrie.fr

Certificate No: MDO/4754/0001/3 Expiry 08/04/2021

MANOIR BOUZONVILLE Forgings carbon0.25 Lyon carbon-manganese 0.25 alloy 0.11 Route de Guerstling 57320 Bouzonville Tel: +33 38739 7857 Email: [email protected] Web: www.manoir.eu.com

Certificate: MD00/4695/0001/3 Expiry Date: 17/08/2020

SBS Forgings carbon3.00 Lyon carbon-manganese 3.00 austenitic stainless 3.00 La Gare BP 6 42130 Boën sur Lignon Tel: +33 4 77 96 80 00 Fax: +33 4 77 96 80 50 Email: [email protected] Certificate #: MD00/1043/0009/3 Expiry date: 04/09/2020 SETFORGE LA CLAYETTE SOCIETE NOUVELLE Forgings carbon0.10 Lyon carbon-manganese 0.10 alloy 0.10 718000 La Clayette +33 (0)3 85 28 40 16 Fax: +33 (0)3 85 28 40 01 Mob: +33 (0)6 89 95 06 78 email: [email protected] web: www.farina.com Certificate No: MD00/4661/0002/3 Expiry Date: 17/12/2021

Germany

ANKER SCHROEDER ASDO GmbH Forgings carbon8.00 Hamburg carbon-manganese 8.00 alloy 8.00 Hannöversche Straße 48 44143 Dortmund Tel: +49 (0)231 51701 16 Fax: +49 (0)231 51701-816 email: [email protected] web: www.anker.de

Certificate No. MD00/0107/0008/3 Expiry date: 17/11/2019 BAHNTECHNIK BRAND-ERBISDORF GmbH Forgings carbon3.50 Hamburg carbon-manganese 3.50 alloy 3.50 Berthelsdorfer Str. 8 D-09618 Brand-Erbisdorf Tel: +49 (0) 3 7322 473579 Fax: +49 (0)3 7322 473393 Email mail: [email protected] Web http://www.bt-be.de Certificate No. MD00/3147/0006/3 Expiry date: 05/01/2021 BGH EDELSTAHL LIPPENDORF GmbH Forgings carbon10.00 Hamburg carbon-manganese 10.00 alloy 10.00 austenitic stainless 10.00 martensitic stainless* 10.00 Hauptstraße 100 04575 Lippendorf Tel: +49 (0) 343 42 670 Fax: +49 (0) 343 42 67230 Email: [email protected] Web: http://www.bgh.de * accepted for approved applications Certificate No. MD00/0145/0008/3 Expiry date: 06/11/2020

Page 25 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office BGH EDELSTAHL SIEGEN GmbH Forgings carbon51.00 Hamburg carbon-manganese 51.00 alloy 51.00 austenitic stainless 28.00 duplex stainless* 8.00 martensitic stainless* 28.00 Industriestraße 9, D-57076 Siegen Tel No. +49 (0)271 701-341 Fax No. +49 (0) 271 701376 Email [email protected] Web www.bgh.de Certificate No. MD00/3767/0007/3 Expiry date: 30/03/2022

BUDERUS EDELSTAHL GmbH Forgings carbon95.00 Hamburg carbon-manganese 95.00 alloy 95.00 austenitic stainless 95.00 martensitic stainless* 95.00 Buderusstraße 25 D-35573 Wetzlar Tel: +49 (0)6441 374 2686 Fax: +49 (0)6441 374 2681 Email: mailto: [email protected] Web: http://www.buderus-steel.com

*accepted for approved applications Certificate No. MD00/0257/0010/3 Expiry date: 06/07/2020 Brück GmbH Ensheim Forgings carbon26.00 Hamburg carbon-manganese 26.00 alloy 26.00 austenitic stainless 26.00 duplex stainless 26.00 Spezialfabrik für Rohrverbindungen Brückstrasse 16 Ensheim D 66131 Saarbrücken Tel: +49 6893 84 414 email: [email protected] web: www.bruck-forgings.com

Certificate No. MD00/0250/0008/3 Expiry date: 04/10/2019 CHR. HÖVER & SOHN GMBH & CO. KG Forgings carbon3.00 Hamburg carbon-manganese 3.00 alloy 3.00 austenitic stainless 3.00 Oberleppe 14 D-51789 Lindlar Tel: +49 2266 95 0 Fax: +49 2266 4371 email: [email protected] web: www.leppe-edelstahl.com Certificate No. MD00/0700/0007/3 Expiry date: 08/10/2019 DEUTSCHE EDELSTAHLWERKE Forgings carbon27.00 Hamburg carbon-manganese 27.00 alloy 27.00 austenitic stainless 27.00 duplex stainless 27.00 martensitic stainless* 27.00 SPECIALTY STEEL GmbH & Co. KG Works Krefeld Oberschlesienstraße 16 D-47807 Krefeld Tel: +49 (0) 2302 294105 email: [email protected] web: www.dew-stahl.com Certificate No. MD00/1853/0011/3 Expiry date: 20/01/2019

DEUTSCHE EDELSTAHLWERKE Forgings carbon1.50 Hamburg carbon-manganese 1.50 alloy 1.50 austenitic stainless 1.50 duplex stainless 1.50 martensitic stainless* 1.50 SPECIALTY STEEL GmbH & Co. KG Works Witten Auestraße 4 D-58452 Witten Tel: +49 (0) 2302 294 131 Fax: +49 (0) 2302 294 662 Email:mailto:[email protected] Web:http://www.dew-stahl.com Certificate No. MD00/2075/0011/3 Expiry date: 20/01/2019

Page 26 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office EWALD WAFFENSCHMIDT GmbH & Co. KG Forgings alloy0.05 Hamburg austenitic stainless 0.05 Otto-Hahn-Str. 6 D-57482 Wenden Tel: +49 (0)2762 9266 86 email: [email protected] web www.waffenschmidt.de Certificate No. MD00/0470/0008/3 Expiry date: 15/03/2021

FLANSCHENWERK BEBITZ GmbH. Forgings carbon0.37 Hamburg carbon-manganese 0.37 alloy 0.37 austenitic stainless 0.37 duplex stainless* 0.37 Lebendorfer Straße 1 D-06420 Bebitz Tel: +49 (0)34691-40-244 Fax: +49 (0)34691-40-327 Email: [email protected] Web: http://www.bebitz.de Certificate No. MD00/0497/0008/3 Expiry date: 05/10/2020 FRAUENTHAL POWERTRAIN GmbH Forgings carbon0.01 Hamburg carbon-manganese 0.01 alloy 0.01 In den Hofwiesen 13 D-58840 Plettenberg Tel: +49 (0)2391 814-35164

E-mail: [email protected]

Website: www.frauenthal-automotive.com Certificate No. MD00/0247/0009/3 Expiry date: 19/11/2020

Approval covers forgings in alloys 36MnVS4, 46MnVS4 and 70MnVS4

Approval covers precipitation hardened forgings for approved applications. FRITZ BAUMANN GmbH + Co.KG Forgings carbon2.00 Hamburg carbon-manganese 2.00 alloy 2.00 Kappelrain 4 74363 Güglingen Frauenzimmern Tel: +49 (0)7135 950326 Fax: +49 (0)7135 9503-13 email: [email protected] web: www.hammerwerk-baumann-kg.de Certificate No. MD00/0648/0010/3 Expiry date: 01/06/2020 GEDORE WERKZEUGFABRIK GmbH & Co. KG Forgings carbon-manganese0.08 Hamburg alloy 0.08 Lange Str. 7A D-42857 Remscheid Tel: +49 2191 986-23 Fax: +49 2191 986 99 E-mail: [email protected]

Website: www.gedore.com

Certificate No. MD00/0895/0008/3 Expiry date: 29/01/2020

GEORG UMFORMTECHNIK GMBH Forgings carbon0.65 Hamburg carbon-manganese 0.65 alloy 0.65 Grubenstraße 5 D-56594 Willroth Tel: +49 (0) 2687 892-66 Fax: +49 (0) 2687 892-68 email: [email protected] web: www.georg-umformtechnik.de Certificate No. MD00/0436/0007/3 Expiry date: 27/09/2018 GESENKSCHMIEDE SCHNEIDER GmbH Forgings carbon0.08 Hamburg carbon-manganese 0.08 alloy 0.08 austenitic stainless 0.08 Ulmer Str. 112 D-73431 Aalen Tel: +49 (0)7361 597672 Fax: +49 (0)7361 597102 email: [email protected] web: www.gsa-aalen.de

Certificate No. MD00/0598/0009/3 Expiry date: 14/02/2021

Page 27 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office GROßENHAINER GESENK- UND FREIFORMSCHMIEDE GmbH Forgings carbon0.35 Hamburg carbon-manganese 0.35 alloy 0.35 Öhringer Str. 24-26 D-01558 Großenhain Tel: +49 3522 350 17 Fax: +49 3522 631 53 email: [email protected] web:www.ggf-schmiede.de Certificate No. MD00/2029/0007/3 Expiry date: 06/07/2019 GUSTAV GRIMM EDELSTAHLWERK GMBH & CO. KG Forgings carbon10.00 Hamburg carbon-manganese 10.00 alloy 10.00 austenitic stainless 10.00 duplex stainless* 10.00 martensitic stainless* 10.00 Ronsdorfer Straße 172-174 D-42855 Remscheid Tel: +49 (0)2191 435 342 Fax: +49 (0)2191 435 285 email: [email protected] Web: www.gustav-grimm.de Certificate No. MD00/0613/0009/3 Expiry date: 18/09/2019 HAMMERWERK ERFT Forgings carbon15.00 Hamburg carbon-manganese 15.00 alloy 15.00 G. Diederichs GmbH & Co. KG Ernst-Diederichs Strasse 1 D-53902 Bad Münstereifel-Arloff Tel: 0049 (0)2253 311-145 Fax: 0049 (0)2253 311-174 Email: mailto:[email protected] Web http://www.hammerwerk-erft.de Certificate No. MD00/0647/0007/3 Expiry date: 01/05/2021 HAMMERWERK FRIDINGEN GMBH Forgings carbon0.08 Hamburg carbon-manganese 0.08 alloy 0.08 austenitic stainless 0.08 Dr.-Werner-Esser-Str. 1 78567 Fridingen an der Donau Tel: +49 7463 81 201 Fax: +49 7463 8130 201 email: [email protected] web www.hammerwerk.de Certificate No.MD00/0646/0008/3 Expiry date: 23/07/2019 IPP VAN TRIEL GMBH Forgings alloy0.40 Hamburg Ripshorster Str. 460 D-45357 Essen Tel: +49 (0) 201 869 11 0 Fax: +49 (0) 201 869 1134 Email: mailto: [email protected] Web: http://www.vantriel.de Certificate Number: MD00/0654/0007/3 Expiry: 27/01/2019

KARL DIEDERICHS Group Forgings carbon35.00 Hamburg carbon-manganese 35.00 alloy 35.00 Oswald Attin KG Stahlhammerwerk Dieselstaße 26 D-42389 Wuppertal-Langerfeld Tel: +49 (0)202 265130 Fax: +49 (0)202 603069 Email mailto:[email protected] Web http://www.attin.de Certificate No. MD00/0126/0009/3 Expiry date: 13/09/2019 KARL DIEDERICHS Group Forgings carbon35.00 Hamburg carbon-manganese 35.00 alloy 35.00 Karl Diederichs KG Stahl-, Walz- und Hammerwerk Luckhauser Straße 1-5 D-42899 Remscheid Tel: +49 (0)2191 593 216 Fax: +49 (0)2191 593 208 email: [email protected] web: www.dirostahl.de Certificate No. MD00/0408/0007/3 Expiry date: 13/09/2019

KARL DIEDERICHS Group Forgings carbon35.00 Hamburg carbon-manganese 35.00 alloy 35.00 August Jansen KG Stahl- und Hammerwerk Walter-Freitag-Straße 37 Tel: +49 (0)2191 593 216 Fax: +49 (0)2191 593 208 email [email protected] web www.jansenstahl.de Certificate No. MD00/0788/0009/3 Expiry date: 13/09/2019

Page 28 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office KARL DIEDERICHS Group Forgings carbon35.00 Hamburg carbon-manganese 35.00 alloy 35.00 Wilh. Sönnecken KG Stahlhammerwerk Blombacher Bach 12 D-42287 Wuppertal Tel: +49 (0)202 6087521 Fax: +49 (0)202 6087 5821 Email:[email protected] Web http://www.soenneckenstahl.de Certificate No. MD00/1401/0008/3 Expiry date: 14/09/2016 KB SCHMIEDETECHNIK GmbH Forgings carbon0.13 Hamburg carbon-manganese 0.13 alloy 0.13 austenitic stainless 0.13 Buschmühlenstraße 62 D-58093 Hagen-Halden Tel: +49 (0)2331 3508-19 Fax: +49 (0)2331 3508-30 Email:[email protected] Web:www.kb-schmiedetechnik.de Certificate No. MD00/0858/0008/3 Expiry date: 13/08/2020 KOLLMEDER SCHMIEDE- und PRESSWERK GmbH & CO.KG Forgings carbon5.50 Hamburg carbon-manganese 5.50 alloy 14.00 Zettlstraße 1 D-84030 Ergolding Tel No: +49 871 975390 Fax No: +49 871 9753940 email: [email protected] web: www.kollmeder-presswerk.de Certificate No MD00/3870/0003/3 Expiry Date 01/01/2020 MASCHINENFABRIK ALFING KESSLER GmbH Forgings carbon17.00 Hamburg carbon-manganese 17.00 alloy 17.00 martensitic stainless* 3.67 Wasseralfingen Auguste-Kessler Str. 20 D-73433 Aalen Tel: +49 7361 501-4435 Fax: +49 7361 501-1970

E-mail: ingo.gerneth@@mafa.alfing.de

Website: www.alfing.de Including crankshafts with a K factor >=1.0 for approved applications. Closed die and continuous grain flow forged crankshafts with a K factor K1 = 1.05

Closed die and continuos grain flow forged crankshafts made with Alfing Clean Steel with a K factor K1 = 1.15 for alloy steel with a minimum tensile strength requirement of 850 MPa. -Plus induction hardening including fillets K2 = 1.15 - Plus hammer peening process K2=1.20 - Plus Nitriding including fillets K2 = 1.25

Materials Quality Scheme Approved - Approval No. MQS 023

Certificate No. MD00/0091/0009/3 Expiry date: 12/07/2019 PLATESTAHL UMFORMTECHNIK GmbH Forgings carbon1.50 Hamburg carbon-manganese 1.50 alloy 1.50 austenitic stainless 1.50 duplex stainless 1.50 Platehofstraße 1 58513 Lüdenscheid Tel +49 2351 4390 Fax: +49 2351 439 355 Email: [email protected] Web: www.platestahl.com Certificate No. MD00/4622/0001/3 Expiry date: 12/10/2019

RICHARD NEUMAYER GESELLSCHAFT Forgings carbon0.12 Hamburg carbon-manganese 0.12 alloy 0.12 austenitic stainless 0.05 duplex stainless 0.05 FÜR UMFORMTECHNIK mbH Hinterer Bahnhof 15 D-77756 Hausach Tel: +49 (0)7831 803 982 Fax: +49 (0)7831 803 66

E-mail: [email protected]

Website: www.r-neumayer.de

Certificate No. MD00/3509/0005/3 Expiry date: 26/05/2020

Page 29 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office ROSSWAG GmbH Forgings carbon4.00 Hamburg carbon-manganese 4.00 alloy 4.00 austenitic stainless 4.00 duplex stainless 4.00 martensitic stainless* 4.00 August-Roßwag-Straße 1 76327 Pfinztal Tel: +49 7240 94142 Email: mailto: [email protected] Web page http://www.edelsthal-rosswag.de * accepted for approved applications Certificate No. MD00/0435/0010/3 Expiry date: 04/07/2021 SAARSCHMIEDE GmbH FREIFORMSCHMIEDE Forgings carbon120.00 Hamburg carbon-manganese 120.00 Bismarckstraße 57-59 D-66330 Völklingen Tel:+49 (0)6898 10 2215 Fax:+49(0)6898 10 5 2215 email: [email protected] web: www.saarschmiede.com

Certificate No. MD00/2017/0008/3 Expiry date: 12/05/2020

SCHMIEDAG GmbH Forgings carbon0.40 Hamburg carbon-manganese 0.40 alloy 0.40 austenitic stainless 0.40 Grüntaler Straße 11 D-58089 Hagen Tel: +49 (0)2331 128-300 Fax: +49 (0)2331 128-234 Email to: [email protected]; [email protected]; [email protected] Web: http://www.schmiedag.de Certificate No. MD00/0120/0009/3 Expiry date: 06/10/2020 SCHMIEDEWERKE GRÖDITZ GmbH Forgings carbon45.00 Hamburg carbon-manganese 45.00 alloy 45.00 austenitic stainless 45.00 Riesaer Straße 1 D-01609 Gröditz Tel: +49 (0) 35263 62970 Fax: +49 (0) 35263 62973 EMail mailto: [email protected] Web page http://www.stahl-groeditz.de The scope of approval includes crankshafts produced by conventional forging in the material grades and to the maximum weight detailed above, and also for crankshafts produced by the TR Process in alloy steel grades only to a maximum weight of 42 Tonnes. Certificate No. MD00/0615/0012/3 Expiry date: 11/03/2020 SIEPMANN-WERKE GmbH & Co.KG Forgings carbon1.10 Hamburg carbon-manganese 1.10 alloy 1.10 austenitic stainless 1.10 Emil-Siepmann-Str. 28 D-59581 Warstein Tel: +49 2902 762 567 Fax: +49 2902 762 633 Email: [email protected] Web:http://www.siepmann.de Certificate #: MD00/1378/0009/3 Expiry date: 06/05/2020

SONA BLW PRÄZISIONSSCHMIEDE GMBH Forgings carbon0.35 Hamburg carbon-manganese 0.35 alloy 0.35 Werk Duisburg Friemersheimer Straße 40 D-47249 Duisburg Tel: +49 0203/732-390 Fax: +49 0203/732 267 email: [email protected] web www.sona-blw.com Certificate #: MD00/2210/0007/3 Expiry date: 08/05/2019

SSK VON SCHAEWEN HÜCKESWAGEN GmbH Forgings carbon20.00 Hamburg alloy 20.00 Schmiedewerk Hückeswagen Stahlschmidtsbrücke 20 D-42499 Hückeswagen Tel: +49 (0)201 81 10 477 Fax: +49 (0)201 81 10 41 email: [email protected] web: www.von-schaewen.de Certificate #: MD00/1284/0009/3 Expiry date: 12/03/2022 SSK VON SCHAEWEN WETTER GmbH Forgings carbon35.00 Hamburg carbon-manganese 35.00 alloy 35.00 Ruhrstrasse 21 58300 Wetter Tel: +49 201 8110 432 Fax: +49 201 8110 449 Email: [email protected] Web: www.von-schaewen.de Certificate #: MD00/3540/0003/3 Expiry date: 13/11/2020

Page 30 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office STAHLHAMMER BOMMERN GMBH Forgings carbon5.00 Hamburg carbon-manganese 5.00 alloy 5.00 austenitic stainless 5.00 Member of COLUMBUS McKINNON Corporation Carl-Zeiss Strasse 7 D-59077 Hamm Tel: +49 (0)2381 91498-43 Fax: +49 (0)2381 91498-21

E-Mail: [email protected]

Website: www.stahlhammer.de Certificate #: MD00/1422/0008/3 Expiry date: 19/01/2019 Schmidt + Clemens GmbH +Co. KG Forgings carbon5.00 Hamburg carbon-manganese 5.00 alloy 5.00 austenitic stainless 5.00 Kaiserau 2 D-51789 Lindlar Tel No: +49 (0) 22 66 92 426 Fax No: +49 (0) 22 66 92 84 26 email: [email protected] web: www.schmidt-clemens.de Certificate No: MD00/1319/0002/3 Expiry date 09/10/2019 Schmiedetechnik Plettenberg GmbH & Co.KG Forgings carbon0.03 Hamburg carbon-manganese 0.03 alloy 0.03 austenitic stainless 0.03 Daimlerstraße 9 D-58840 Plettenberg Tel: +49 2391 816 766 Fax: +49 2391 816 703

E-mail: [email protected]

Website: www.stplettenberg.de Certificate Number: MD00/1205/0008/3 Expiry: 19/03/2021 THIELE GmbH & CO. KG Forgings carbon0.05 Hamburg carbon-manganese 0.05 Werkstr. 3 D-58640 Iserlohn-Kalthof Tel: +49 (0)2371 947 426 Fax: +49 (0)2371 947 375 email: [email protected] web: www.thiele.de

Certificate No: MD00/1513/0009/3 Expiry date: 01/07/2021

THYSSENKRUPP ROTHE ERDE GmbH Forgings carbon15.00 Hamburg carbon-manganese 15.00 alloy 15.00 austenitic stainless 15.00 Tremoniastraße 5-11 D-44137 Dortmund Tel: +49 (0)231 186 2244 Fax: +49 (0)231 186 2548 Certificate No. MD00/0684/0008/3 Expiry: 02/05/2021 ThyssenKrupp Gerlach GmbH Forgings carbon0.25 Hamburg carbon-manganese 0.25 alloy 0.25 Neue Industriestrasse Postfach 1252 D 66403 Homburg Tel: +49 6841 10 7331 email: [email protected] web: www.thyssenkrupp.com

The scope of approval includes for crankshafts to the above maximum weight. Certificate Number: MD00/0597/0009/3 Expiry date: 13/10/2020 WARMPRESSWERK MAX B. SCHACHMANN GmbH Forgings carbon0.03 Hamburg carbon-manganese 0.03 alloy 0.03 Hauptstraße 29 D-54570 Niederstadtfeld Tel: +49 (0)6596 790 Fax: +49 (0)6956 7979 email: [email protected] web: www.warmpresswerk.de Certificate #: MD00/1655/0007/3 Expiry date: 29/08/2019

Page 31 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office WILHELM MAASS GmbH. MAASS GLOBAL GROUP Forgings carbon0.10 Hamburg austenitic stainless 0.10 Zeche Ernestine 18 D-45141 Essen Tel: +49 (0)201 29493-338 Fax: +49 (0)201 291875 Email: [email protected] Web: www.wmaassglobal.com Certificate #: MD00/0966/0007/3 Expiry date: 03/04/2019 Wildauer Schmiede - und Kurbelwellentechnik GmbH Forgings carbon3.00 Hamburg carbon-manganese 3.00 alloy 3.00 austenitic stainless 0.20 Schmiedestraße D-15745 Wildau Tel: +49 3375 586 305 Fax: +49 3375 586 310 Email: [email protected] Web http://www.wildauer-skt.de Including crankshafts with K factor > 1.0 for approved applications Certificate #: MD00/1329/0010/3 Expiry date: 14/11/2021 Hungary

HÁMOR Zrt. Forgings carbon5.00 Vienna carbon-manganese 5.00 alloy 5.00 Miskolc Kiss Ernö út17 H-3531 Tel: +36 46 401 520 Fax: +36 46 531 391 Email: mailto:[email protected] Web: http://www.hamorforge.com Certificate No. MD00/3285/0005/3 Expiry date: 24/11/2021

India

ARCVAC FORGECAST PRIVATE LIMITED Forgings carbon8.00 Chennai carbon-manganese 8.00 alloy 8.00 NH 2, Durgapur Expressway P.O: Panchghara Hooghly. West Bengal - 712 306 Tel: + 91 33 2600 2176; Fax + 91 33 2659 8002 Email: [email protected] Web: www.arcvacsteel.com Certificate No. MD00/3561/0005/3 Expiry date: 05/02/2021 Approved for semi finished forged bars BHARAT FORGE LIMITED Forgings carbon6.50 Mumbai carbon-manganese 6.50 alloy 6.50 Mundhwa Pune 411 036

Approved for closed die crankshaft forgings up to 570 kg maximum weight and main journal diameter of maximum 125 mm with an enhanced k factor of 1.05. Approved for the surface induction hardening of crankshafts.

Controlled cooling of carbon crankshafts in grade SAE 1548 up to a maximum 162 mm flange diameter in lieu of normalising and tempering accepted for approved applications.

Tel: +91 20 26702525 Fax: +91 20 26870693 Email: [email protected] Certificate No. MD00/0185/0009/3 Expiry date: 04/10/2020 Web: http://www.bharatforge.com

BHARAT FORGE LIMITED Forgings carbon1.06 Mumbai carbon-manganese 1.06 alloy 1.06

Page 32 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Baramati E-1/1 MIDC Baramati - Maharastra Tel no. 00 91 211 2 669989

E-mail: [email protected]

Website: www.bharatforge.com Approved for closed die crankshaft forgings with an enhanced k factor of 1.05 with a maximum main journal diameter of 244 mm. Approved for normalised, quench & tempered, & surface hardened supply conditions Cert No.MD00/3682/0004/3 Expiry date: 11/10/2021 CHANDAN STEEL LIMITED Forgings austenitic stainless1.00 Mumbai Forging Division Survey No. 102/2 Village Dehri Umbergaon, Valsad Gujarat - 396 171 Admin Office: Tel: +91 22 66290600, Fax: +91 22 66290633/34 Email to: [email protected] Works: Tel: +91 260 3089999, Fax: +91 260 2562287/2560103 Email to: [email protected] Website: www.chandansteel.net Certificate No. MD00/4360/0002/3 Expiry date: 07/07/2020 ECHJAY INDUSTRIES PVT. LTD. Forgings carbon3.00 Mumbai carbon-manganese 3.00 alloy 3.00 austenitic stainless 3.00 Lalpari Lake Road Rajkot 360 003 Gujarat Tel: +91 281 2387482 Fax: +91 281 2387847 email [email protected] web: www.echjayindustries.com Approval includes crankshafts with a K factor of 1.05 Certificate No. MD00/3007/0005/3 Expiry date: 18/09/2018

KUNJ FORGINGS (P) LTD Forgings carbon4.10 Mumbai carbon-manganese 4.10 alloy 4.10 austenitic stainless 2.00 Ghaziabad C-177, B.S Road, Industrial Area Ghaziabad - 201001 (U.P) Tel No: +91-120-4292692, Fax: +91-120-4292699. E-mail: [email protected] www.kunjforge.in Certificate No: MD00/4445/0002/3 Expiry 13/06/2020 SHARDLOW INDIA LTD Forgings carbon0.14 Chennai carbon-manganese 0.14 alloy 0.14 Huzur Gardens Sembian Chennai 600 011 Tel: 044-25375807 Fax: 00914425375284 Email: [email protected] Website: www.shardlow.in Certificate Number: MD00/4602/0002/3 Expiry Date: 23/01/2021 SUNIL FORGING & STEEL INDUSTRIES - UNIT 2 Forgings carbon4.00 Mumbai alloy 4.00 L-141 & L-142, M.I.D.C. Taloja, Tal. Panvel, Dist. Raigad, Navi Mumbai 410208, Maharashtra Tel: +91 2232676007 Fax: +91 2227401641 Email mailto: [email protected] Web: http://www.sunilforgings.com Certificate No. MD00/4654/0001/3 Expiry date: 21/01/2020

VIKRANT FORGE PVT. LIMITED Forgings carbon8.00 Chennai carbon-manganese 8.00 alloy 8.00 Maity Para, NH-2, Delhi Road PO: Dankuni - 711224 West Bengal Phone: +91 33 2659 6006 Fax: +91 33 2659 3738 email [email protected] web www.vikrantforge.com Certificate No. MD00/3055/0005/3 Expiry date: 21/01/2019

VIRAJ PROFILES LIMITED (FORGING DIVISION) Forgings austenitic stainless1.20 Mumbai

Page 33 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office G-2,23,75, MIDC & SURVEY No-140/1, SARAVALI, TARAPUR INDUSTRIAL AREA BOISAR, DIST-PALGHAR, MAHARASHTRA - 401506 Tel: +91 90444 1039 Fax: +91 2525 260159

E-mail [email protected]

Website: www.viraj.com

Certificate Number: MD00/3214/0005/3 Expiry date: 06/12/2020

Italy

VARESINA STAMPI S.p.A Forgings carbon0.13 Genoa carbon-manganese 0.13 alloy 0.13 Regionionia Tenqua, 1-10070 Corio Canavese (TO) Tel: +39 011 9282240

E-mail: [email protected]

Website:www.varesina.com

Certificate No: MD00/4733/0001/3 Expiry Date: 28/06/2020 A.C.S.A. STEEL FORGINGS S.P.A. Forgings carbon0.20 Milan carbon-manganese 0.20 alloy 0.20 Via Per Solbiate Arno 43 21040 Oggiona S.Stefano Varese Tel: +39 331 712 011 Fax: +39 331 712055 email: [email protected] web: www.asca.it Certificate No. MD00/0071/0007/3 Expiry date: 24/08/2019 ACCIAIERIE VALBRUNA S.P.A. Forgings carbon5.50 Venice carbon-manganese 5.50 alloy 5.50 austenitic stainless 5.50 duplex stainless 5.50 precipitation hardened 5.50 stainless* Viale Della Scienza, 25 z.i. 36100 Vicenza Tel: +39 0444 968211 Fax: +39 0444 968182 Email:mailto:[email protected] Web:http://www.acciaierie-valbruna.com Certificate No. MD00/0041/0009/3 Expiry date: 01/06/2020 ASFO S.P.A. Forgings carbon10.00 Venice carbon-manganese 10.00 alloy 10.00 austenitic stainless 4.00 duplex stainless 4.00 martensitic stainless* 4.00 via IV Novembre, 12 36010 Chiuppano (VI) Tel. +39 0445 805290 Fax. +39 0445 805299 email: [email protected] web: www.fomasgroup.com Certificate No. MD00/2823/0007/3 Expiry date: 15/09/2019

ASFO S.P.A. Forgings carbon18.00 Venice carbon-manganese 18.00 alloy 18.00 Via Stradone del Dieci 45030 Villamarzana (RO) Tel: +39 (0) 445 805290 Fax: +39 (0) 445 805299 email: [email protected] web: www.fomasgroup.com Certificate Number: MD00/4064/0003/3 Expiry: 16/09/2019 ASO SIDERURGICA S.p.A. UNIPERSONALE Forgings carbon28.00 Milan carbon-manganese 28.00 alloy 28.00 austenitic stainless 31.00

Page 34 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office ASO Forge Via Verginello, n 29~31 25045 Castegnato Brescia Tel No: +39 30 6841550 Fax No: +39 30 6841012

E-mail: [email protected]

Website: www.aso.it

Certificate No: MD00/3967/0005/3 Expiry date 29/11/2020 B.F.E. s.r.l Forgings carbon0.03 Milan carbon-manganese 0.03 alloy 0.03 austenitic stainless 0.03 duplex stainless* 0.03 Via G. Segantini, 16-23842 Bosisio Parini (LC) Tel. +39 035 584290 Fax. +39 035 583022 email: [email protected] web: bfe.it Certificate No. MD00/4163/0002/3 Expiry date: 14/05/2019 BERTOT S.p.A. Forgings carbon0.16 Milan carbon-manganese 0.16 alloy 0.16 austenitic stainless 0.16 duplex stainless 0.16 Via Robaronzino 41/43 10073 CIRIE'(TO) Tel: +39 (0)11 9214935 Fax: +39 (0)11 9210618 email [email protected] web: www.bertot.com Certificate No. MD00/4188/0002/3 Expiry date: 24/06/2019 BIFRANGI S.p.A. Forgings carbon0.18 Venice carbon-manganese 0.18 alloy 0.18 Via Manzoni, 14 36065 Mussolente Vicenza Tel: +39 (0)424 8381 Fax: +39 (0)424 838211 Email:[email protected] Web:http://www.bifrangi.it Certificate No. MD00/2946/0006/3 Expiry date: 22/01/2021 CANAVERA & AUDI S.p.A. Forgings carbon0.20 Milan carbon-manganese 0.20 alloy 0.20 CORIO PLANT Regione Malone 6 10070 Corio (TO) Tel: +39 (0)11 92 86 28, Fax: +39 (0)11 92 82 709, email: [email protected] website: www.canavera.com Certificate Number:. MD00/3048/0007/3 Expiry: 31/01/2022 CANAVERA & AUDI S.p.A. Forgings carbon0.20 Milan carbon-manganese 0.20 alloy 0.20 RIVARA PLANT Via Forno, 1 10080 Rivara (To) Tel: +39 (0) 1244 8733 Fax: +389 (0) 1244 8784 e-mail: [email protected] web: www.canavera.com

Certificate Number: MD00/4147/0003/3 Expiry: 02/02/2019 CMF S.P.A. Forgings carbon10.00 Venice carbon-manganese 10.00 alloy 10.00 via G. Galilei, 25 34071 Cormons (GO) Tel: +39 0481 630589 Fax: +39 0481 630511 email: [email protected] web : www.cmf-forgiati.it Certificate No. MD00/2290/0007/3 Expiry date: 01/09/2019 CUGINI FRIGERIO S.R.L. Forgings carbon0.01 Milan carbon-manganese 0.01 alloy 0.01 Via S. Francesco d'Assisi, 3 22036 ERBA CO Tel: +39 (0)31 643 325 Fax: +39 (0)31 644 286 Email: mailto:[email protected] Web: http://www.cuginifrigerio.com Certificate Number: MD00/0357/0007/3 Expiry: 30/10/2018

Page 35 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office F.A.C.S. FUCINE S.R.L. Forgings carbon9.00 Trieste carbon-manganese 9.00 alloy 9.00 austenitic stainless 9.00 Forgiatura Acciai Speciali Viale del Lavoro, 100 33050 Pavia di Udine (Udine) Tel: +39 0432 656510 Fax: +39 0432 675784 Email: [email protected] Certificate No. MD00/0471/0008/3 Expiry date: 05/12/2019

F.O.C. CISCATO S.p.A. Forgings carbon36.00 Venice carbon-manganese 36.00 alloy 36.00 austenitic stainless 25.00 Via Pasin, 1 36010 Velo d'Astico fraz.Seghe (Vicenza) Tel: +39 0445 739111 Fax: +39 0445 739222

E-mail: [email protected]

Website: www.foc.it Certificate No. MD00/2032/0010/3 Expiry date: 01/12/2021 FEAT GROUP SpA Divisione FEAT INDUSTRIALE Forgings carbon0.10 Milan carbon-manganese 0.10 alloy 0.10 austenitic stainless 0.10 duplex stainless* 0.07 Via G. Parini 30 23861 Cesana Brianza (LC) Tel: +39 031 6591 Fax: +39 031 659219 Email: [email protected] Web: http://www.featgroup.com Certificate No. MD00/0485/0008/3 Expiry date: 26/09/2017

FOMAS S.p.A. Forgings carbon25.00 Milan carbon-manganese 25.00 alloy 25.00 austenitic stainless 25.00 duplex stainless* 37.50 Via Martiri della Liberazione, 17 23875 Osnago (LC) Tel: +39 (0) 39 99811 Fax: +39 (0) 39 58487 Email: [email protected] Web: http://www.fomas.it Certificate No. MD00/0475/0009/3 Expiry date: 06/01/2022 FOMEC SpA Forgings carbon25.00 Genoa carbon-manganese 25.00 Corso Inghilterra,40 Zona Industriale, 12084 Mondovi' (CN) Tel No +39 0174 45394

E-mail: [email protected]

Website: www.fomec.it Certificate No MD00/4012/0003/3 Expiry date 10/04/2021 FORGE MONCHIERI S.p.A. Forgings carbon30.00 Milan carbon-manganese 30.00 alloy 30.00 austenitic stainless 30.00 Via Industriale No. 3 25040 Cividate Camuno Brescia Tel: +39 0364 236600 Fax: +39 0364 340902 email: [email protected] web: www.monchieri.it Certificate No. MD00/0522/0008/3 Expiry date: 22/12/2021 FORGE NICROMO S.p.A Forgings duplex stainless*0.50 Milan Via Provinciale 57 23813 Bindo di Cortenova (LC) Tel: +39 (0) 341 979831 Fax: +39 (0) 341 982228 Email: [email protected] Certificate Number. MD00/4271/0003/3 Expiry date:22/12/2019

Page 36 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office FORGIA DI BOLLATE S.P.A. Forgings carbon-manganese30.00 Brescia alloy 30.00 austenitic stainless 12.40 duplex stainless* 12.40 Canneto Sull'Oglio (Mn) Strada Provinciale 4, No 9 46013 Canneto Sull'Oglio (Mn) Tel.:+390376714511 Fax.:+390376723846 Email: [email protected] http//: www.forgiadibollate.com Certificate no.: MD00/4226/0002/3, Expiry date: 15/09/2019 FORGIA RAPIDA S.r.l Forgings alloy0.67 Ravenna duplex stainless 0.60 Via Brini,nr 32 40128 Bologna Tel No +39 51 328484 Fax No +39 51 328312 email: [email protected] web: www.forgiarapida.com

Certificate No. MD00/4077/0003/3 Expiry Date 09/09/2018

FORGIA REZZATESE SRL UNIPERSONALE Forgings carbon9.00 Milan carbon-manganese 9.00 alloy 9.00 martensitic stainless* 9.00 Via Gavardina 20 25011 Calcinato Brescia Tel No +30 9964722 Fax No +30 9964762 email: [email protected] web: www.forgiaressatese.it Certificate No. MD00/4562/0002/3 Expiry Date 29/03/2022

FORGIATURA A. VIENNA S.r.l. Forgings carbon60.00 Milan alloy 60.00 austenitic stainless 60.00 duplex stainless 60.00 Via Ospiate 46/48 20017 RHO Milan Tel: +39 2 9393 0011 email: [email protected] web: www.forgevienna.it Certificate No. MD00/0535/0007/3 Expiry date: 09/02/2020 FORGIATURA MARCORA S.r.l. Forgings carbon8.00 Milan carbon-manganese 8.00 alloy 8.00 austenitic stainless 8.00 Olgiate Olona Via Gramsci, 36 21057 Olgiate Olona (VA) Tel: +39 331 375540 email: [email protected] web: www.forgiaturamarcora.it

Certificate No. MD00/0536/0008/3 Expiry date: 31/05/2020

FORGIATURA MODERNA ARESE S.p.A. Forgings carbon60.00 Milan carbon-manganese 50.00 alloy 50.00 Via delle Industrie, 17 20020 Arese (MI) Tel: +39 02 93 45 1938 email: [email protected] web: www.fmaspa.it Certificate No. MD00/0533/0007/3 Expiry date: 28/11/2019 FORGIATURA MORANDINI S.R.L Forgings carbon85.00 Milan carbon-manganese 85.00 alloy 53.00 austenitic stainless 15.00 Via dell'Industria, 5 25040 Cividate Camuno - Brescia (BS) Tel: +39 0364 347132 Fax: +39 0364 347156

E-Mail: [email protected] Web: http://www.morandini.it Certificate No. MD00/0534/0010/3 Expiry date: 14/05/2020 FORGIATURA SAN GIORGIO S.p.A. Forgings carbon0.84 Venice carbon-manganese 0.84 alloy 0.84

Page 37 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Via Alessandria 9/11 20010 Canegrate, Milan Tel No: 00 39 0331 413311 Fax No: 00 39 0331 413333

E-mail: [email protected]

Website: www.forgiaturasg.it Certificate No: MD00/3707/0004/3 Expiry date: 19/11/2021 FORGITAL ITALY S.p.A. Forgings carbon25.00 Venice carbon-manganese 25.00 alloy 25.00 austenitic stainless 25.00 Via G. Spezzapria, 1 36010 Velo d'Astico loc. Seghe (Vicenza) Vicenza Tel: +39 (0) 445 731313 Fax: +39 (0) 445 731490 Email: mailto:[email protected] Web page http://www.forgital.com Certificate Number: MD00/0538/0007/3 Expiry: 16/02/2018

FRANCHINI ACCIAI S.p.A. Forgings carbon80.00 Milan carbon-manganese 80.00 alloy 50.00 Via IV Novembre 9/17 25030 Mairano Brescia Tel: +39 30 9750211 Fax: +39 30 9975231

Email: mailto:[email protected] Web: http://www.franchiniacciai.com Certificate No. MD00/0548/0010/3 Expiry date: 21/11/2020 FRIULFORGIA S.R.L Forgings carbon10.00 Trieste carbon-manganese 10.00 alloy 10.00 Localita Pannellia No. 55 33039 Sedegliano (Udine) Tel: +39 0346 6109111 Fax: +39 0432 918630 E-mail: [email protected]

Website: www.friuforgia.it

Certificate No. MD00/3893/0003/3 Expiry date: 14/03/2020 GASPARINI s.r.l. Forgings alloy35.38 Milan Via Rana snc - Zona D6 15122 Spinetta Marengo - Alessandria Tel No: +39 1316 17430 Email: [email protected] Web: www.gasparinisrl.eu Certificate no: MD00/4316/0002/3 Expiry date 12/05/2020

HOT ROLL S.r.l. Forgings alloy0.08 Trieste FOMAS GROUP Small Rings Products Via Emilio Serena Imprenditore, 4 Busano 10080 (TO) Tel: +39 0124 477503 Fax: +39 0124 477505 email: [email protected] web: www.fomasgroup.com Certificate No. MD00/4133/0003/3 Expiry date: 22/03/2022 IRE-OMBA S.p.A. Forgings carbon5.00 Milan carbon-manganese 5.00 alloy 5.00 austenitic stainless 5.00 Via Serassi, 14 24125 Bergamo Tel: +39 35 4160811 email: [email protected] www.ire-omba.it Certificate No. MD00/2340/0006/3 Expiry date: 28/05/2017 ISEF Srl Forgings carbon0.05 Milan carbon-manganese 0.05 alloy 0.05 austenitic stainless 0.05 duplex stainless 0.05

Page 38 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Via Matteotti 70 21040 Carnago Varese Tel: +39 0331 994033 Fax: +39 0331 991761 Email: [email protected] Web http://www.isefsteelforgings.com Certificate No. MD00/2172/0008/3 Expiry date: 25/12/2021 LUCCHINI MAMÈ FORGE S.p.A. Forgings carbon30.00 Milan carbon-manganese 30.00 alloy 30.00 austenitic stainless 15.00 Via Delle Cave, 1 25040 Cividate Camuno (Brescia) Tel: +39 (0) 364 347755 Fax: +39 (0) 364 347791

E-mail: [email protected] Website: www.lucchinimame.com

Certificate No. MD00/0532/0009/3 Expiry date: 20/09/2020

LUCCHINI RS S.p.A. Forgings carbon40.00 Milan carbon-manganese 40.00 alloy 40.00 austenitic stainless 40.00 Via G. Paglia N.45 24065 Lovere Bergamo Tel: +39 035 963471 Fax: +39 035 963488

E-mail: [email protected] Web: www.lucchiniRS.it

Including steelmaking by the EAF and ingot route.

Certificate No. MD00/0949/0007/3 Expiry: 18/03/2018 MEGA S.P.A. Forgings carbon0.10 Trieste carbon-manganese 0.10 alloy 0.10 austenitic stainless 0.10 duplex stainless* 0.10 Via Dalla Chiesa 3 24020 Scanzorosciate el: +39 035 661280 Fax: +39 035 665535 Email: [email protected] Web: http://www.mega-fittings.com Certificate No. MD00/4121/0003/3 Expiry date: 28/06/2019 METALCAM S.P.A Forgings carbon30.00 Milan carbon-manganese 30.00 alloy 30.00 austenitic stainless 30.00 Breno Works Via Leonardo da Vinci 3 25043 Breno (BS) Tel: +39 0364 238261 Fax: +39 0364 238216 Email: mailto:[email protected] Certificate No. MD00/2111/0007/3 Expiry date: 02/01/2020 METALFAR PRODOTTI INDUSTRIALI S.p.A Forgings carbon0.07 Milan carbon-manganese 0.07 alloy 0.07 austenitic stainless 0.07 Via G. Parini, 28 23861 Cesana Brianza (Lecco) Tel: +39 3351451866

E-mail: [email protected]

Website: www.metalfar.com

Certificate No. MD00/2937/0006/3 Expiry date: 04/06/2020 OFAR S.p.A. Forgings carbon112.00 Milan carbon-manganese 112.00 alloy 112.00

Page 39 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Via dell'Industria. 5 25010 Visano Brescia Tel: +39 30 952 2511 Fax: +39 30 992 9952

E- mail: [email protected]

Website: www.givagroup.it

Certificate Number: MD00/1128/0009/3 Expiry: 21/04/2022 OFAR S.p.A. Forgings carbon42.00 Venice carbon-manganese 42.00 alloy 42.00 austenitic stainless 15.00 Forges Plant Via dell' Artigianato 57 33043 Cividale del Friuli (UD) Tel: + 39 (0)432 701433 Fax: +39 (0)432 734299 email: [email protected] web www.forgesitaly.it Certificate No. MD00/2717/0008/3 Expiry date: 17/07/2021 OFFICINA MECCANICA FRATELLI RISETTI S.r.l Forgings carbon0.05 Milan carbon-manganese 0.05 austenitic stainless 0.05 Via Trieste,4 21048, Solbiate Arno (VA) Tel No: +39 331 993440 +39 331993356 Email: risettim'libero.it Certificate No: MD00/4280/0002/3 Expiry date: 14/01/2020 OFFICINE AMBROGIO MELESI & CO. Forgings carbon1.20 Milan carbon-manganese 1.20 alloy 1.20 austenitic stainless 1.20 duplex stainless* 1.20 Largo de' Vecchi, 11 23813 Cortenova (LC) Tel: +39 0341 901521 Fax: +39 0341 983497 Email:mailto:[email protected] Certificate No. MD00/1134/0009/3 Expiry date: 29/06/2019 OFFICINE BINDA & GALPERTI S.r.l. Forgings carbon0.32 Milan carbon-manganese 0.32 austenitic stainless 0.32 duplex stainless* 0.32 Via Roma 43 Tel no:+ 39 341 901333 Fax No: +39 341 901300 Email [email protected] Web www.officinebindaegalperti.com Certificate No MD00/4225/0004/3 Expiry date 04/09/2019 PIETRO ROSA TBM srl Forgings martensitic stainless*0.20 Trieste Via F. Petrarca 7, 33085 Maniago (PN) Tel: +39 0427 71503 Fax: +39 0427 71771 email: [email protected] web: www.pietrorosatbm.com *martensitic grades are certified by LR only for projects for which the use of the grade has been specifically approved by LR plan appraisal.

Approval covers the manufacture of turbo charger turbine disc blanks.

Certificate No: MD00/4842/0001/3 Expiry Date: 06/03/2022

RIGANTI S.p.A. Forgings carbon1.00 Milan carbon-manganese 1.00 alloy 1.00 austenitic stainless 1.00 Via Vittorio Veneto 1 21048 SOLBIATE ARNO (VA) Tel: +39 331 988600 Fax: +39 331 988699 Email: mailto:[email protected] Web: http://www.riganti.com Scope of approval includes for solid forged crankshafts in alloy grade to a maximum weight of 140kgs. Heat treatment is subcontracted Certificate No. MD00/0771/0010/3 Expiry date: 28/08/2020 RINGMILL S.p.A. Forgings carbon25.00 Milan carbon-manganese 25.00 alloy 25.00 austenitic stainless 25.00 martensitic stainless* 25.00

Page 40 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Via Valeriana 103 23015 Dubino (Sondrio) Tel: +39 (0)342 688111 fax: +39 (0)342 687746 Email: mailto:[email protected] * accepted for approved applications Certificate No. MD00/2162/0008/3 Expiry date: 08/10/2021 RTD SRL Forgings carbon1.70 Venice carbon-manganese 1.70 austenitic stainless 0.70 duplex stainless 0.70 via Dei Roveri 34, 36011 Arsiero (VI) +39 0445 741420 Fax: +39 0445 712368 email: [email protected] web: www.rtdforge.com Certificate No: MD00/4582/0002/3 Expirt Date: 22/05/2019 SESIA FUCINE S.r.l. Forgings carbon6.00 Trieste carbon-manganese 6.00 alloy 6.00 Strada Basse di Stura 61 10154 Torino Tel: +39 011 2424165 Fax: +39 011 2465746 Email: [email protected] Web: www.sesiafucine.com Certificate No. MD00/3744/0005/3 Expiry date: 15/02/2022 SIDERFORGEROSSI GROUP S.P.A. Forgings carbon10.00 Venice carbon-manganese 10.00 alloy 10.00 austenitic stainless 1.50 Works of Arsiero Via Cartiera di Mezzo, 38 36011 Arsiero (VI) Tel: +39 0445 714400 Fax: +39 0445 714444 Email mailto:[email protected] Web: http://www.forgerossi.com Certificate Number. MD00/3154/0006/3 Expiry date: 09/04/2020 SIDERFORGEROSSI GROUP SPA Forgings carbon4.00 Venice carbon-manganese 4.00 alloy 4.00 Cogollo del Cengio Via M. Schiro, 2 36010 Cogollo del Cengio Vicenza Tel: +39 0445 714400 Fax: +39 0445 714444 E-mail; [email protected]

Website: www.siderforgerossi.com

Certificate No. MD00/2159/0009/3 Expiry date: 08/11/2021

SIDERFORGEROSSI GROUP SPA Forgings carbon0.50 Milan carbon-manganese 0.50 alloy 0.50 Busano Canavese Via Rolando Perino, 37 10080 Busano Canavese Tel: +39 0124 477333 Fax: +39 0124 477303 Email mailto: [email protected] Web http;//www.siderforgerossi.com Certificate No. MD00/3551/0005/3 Expiry date: 08/05/2020 SPECIAL FLANGES S.P.A Forgings carbon25.00 Milan carbon-manganese 25.00 alloy 25.00 austenitic stainless 25.00 Via Liguria 115, 20025 Legnano (MI), Milan, Tel: +39 0362.552247 Fax: +39 0362.501653 email: [email protected] web: www.special-flanges.it Certificate No.: MD00/4335/0002/3 Expiry Date: 09/06/2020 STAMPERIA CASOLI Srl. Forgings carbon0.02 Milan carbon-manganese 0.02 alloy 0.02 austenitic stainless 0.02

Page 41 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Via Colzani 40 21048 Solbiate Arno VA Tel: +39 0331 994 254 Fax: +39 0331 991 611 Email:[email protected] web :www.stamperiacasoli.it Certificate Number: MD00//2718/0007/3 Expiry: 01/07/2021 STAMPERIA DI MENZAGO S.R.L. Forgings carbon0.01 Milan carbon-manganese 0.01 alloy 0.01 Via Della Concordia, 39 21040 Menzago di Sumirago (VA) Tel No: +39 331909196 Fax No: + 39 331 908511 Email [email protected] Web: www.stamperiadimenzago.it Certificate No: MD00/4251/0002/3 Expiry date 22/10/2019 STAMPERIA ITALFORGE DI SIRONE Srl. Forgings carbon0.02 Milan carbon-manganese 0.02 alloy 0.02 austenitic stainless 0.02 duplex stainless 0.02 Via dell'Industria, 8 23844 Sirone (LC) Tel: +39 031 850016 Fax: +39 031 852572 email: [email protected] web: www.stamperiaitalforge.it

Certificate No: MD00/4532/0001/3 Expiry date: 06/12/2018 TENARIS DALMINE Forgings alloy4.00 Milan Piazza Caduti 6 Luglio 1944 24044 Dalmine (Bergamo) Tel: +39 (0)35 5602098 Mob: +39 3290504376 email: [email protected] web: www.tenaris.com Approved for quench and tempered seamless pressure vessels by pipe spinning process to AD-2000 Merkblatt W0 Maximum approved dimensions = 711mm o/d x 40mm w/t Certificate No. MD00/4363/0002/3 Expiry date: 19/07/2020 VALFORGE s.r.l. Forgings carbon6.00 Milan carbon-manganese 6.00 alloy 6.00 austenitic stainless 6.00 Via Provinciale 41/43 Cortenova (LC) Tel: +39 341 90 15 79 Fax: +39 391 983864 Email: [email protected] Website: http://www.valforge.it

Certificate No. MD00/4196/0002/3 Expiry date: 03/07/2019 VARESINA STAMPI S.p.A Forgings carbon0.05 Genoa carbon-manganese 0.05 alloy 0.05 Via G. Pozzi 13-21040 Quinzano di Sumirago (VA) Tel: +39 0331 909010 Fax: +39 0331 908681

E-mail: [email protected] Website: www.varesina.com

Certificate No: MD00/4518/0002/3 Expiry Date: 17/10/2021

Japan

AICHI STEEL CORPORATION Forgings carbon4.00 Kobe carbon-manganese 4.00 austenitic stainless 4.00 Chita Plant 1, Wano-Wari Arao-machi Tokai-shi Aichi-ken, 476-8666 Tel: +81 52 603 9353 Fax: +81 52 603 9898 Email: mailto:[email protected] Web www.aichi-steel.co.jp Certificate No. MD00/0076/0007/3 Expiry date: 23/09/2018

Page 42 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office ANTEX CORPORATION Forgings carbon3.00 Yokohama carbon-manganese 3.00 alloy 3.00 austenitic stainless 3.00 Takahagi Plant 3333-24 Kami-Tezuna Takahagi City Ibaraki 318-0004 Tel: +81 (0)293 23 7511 Fax: +81 (0)293 23 7515 E-mail: mailto: [email protected] Web:http://www.antex.co.jp Certificate No. MD00/0110/0009/3 Expiry date: 06/07/2020 CHIKARA KOGYO Co., Ltd. Forgings carbon1.00 Yokohama carbon-manganese 1.00 alloy 1.00 austenitic stainless 1.00 233-4 Nishi-Sangao Noda-shi Chiba. 278-0015 Tel: +81 471 24 7725 Fax: +81 471 24 6671

E-mail: [email protected] Website: www.chikra-kogyo.co.jp

Certificate No. MD00/0301/0008/3 Expiry date: 09/09/2019

DAIDO STEEL CO., LTD. Forgings carbon30.00 Yokohama carbon-manganese 30.00 alloy 30.00 austenitic stainless 16.00 Shibukawa Plant 500, Ishihara Shibukawa-shi Gunma 377-0007 Tel: +81 (0)279 25 2009 Fax: +81 (0)279 25 2043 Email: mailto:[email protected] Certificate No. MD00/0375/0009/3 Expiry date: 23/11/2021 DAIMARU STEEL FORGING CO., LTD. Forgings carbon20.00 Kobe carbon-manganese 20.00 alloy 20.00 austenitic stainless 20.00 28-7 Kujo 1-chome Nishi-ku Osaka Tel: +81 6 581 2851 Fax: +81 6 581 2855 email: [email protected] web: www.daimaru-kozai.co.jp Certificate No. MD00/0380/0008/3 Expiry date: 15/10/2021 DOWA FORGING CO., LTD. Forgings carbon5.00 Yokohama carbon-manganese 5.00 alloy 5.00 2-6-19, Keihinjima Ohta-ku, Tokyo 143-0003 Tel: +81 (0)3 3790 2003 Fax: +81 (0)3 3790 2877 email: [email protected] web www.dowa-forging.co.jp Certificate No. MD00/2875/0006/3 Expiry date: 11/04/2020 HAKURO FORGING CO., LTD. Forgings carbon3.25 Kobe carbon-manganese 3.25 alloy 3.25 444-22 Shimokusadani Inami-cho Kako-gun Hyogo Pref. Tel: +81 794 95 1238 Fax: +81 794 95 1325 email: mailto: [email protected] Website: www.hakuro-net.co.jp Certificate No. MD00/3162/0005/3 Expiry date: 24/05/2020 HATAKEYAMA IRON WORKS Co., Ltd. Forgings carbon10.00 Yokohama carbon-manganese 10.00 alloy 10.00

Page 43 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office 2-11-1, Keihinjima Ohta-ku Tokyo 143-0003 Tel: +81 (0)3 3790 0211 Fax: +81 (0)3 3790 0210 Email: [email protected] Web site www.hatakeyama.ne.jp Certificate No. MD00/0658/0008/3 Expiry date: 21/01/2021 HITACHI METALS, LTD. Forgings alloy12.00 Kobe austenitic stainless 12.00 Yasugi Works 2107-2, Yasugi-cho Yasugi-shi Shimane-ken Tel: +81 (0) 854 22 1908 Fax: +81 (0) 854 23 0281 Email mailto:[email protected] Web http://www.hitachi-metals.co.jp Certificate No. MD00/0678/0008/3 Expiry date: 17/12/2021 HOWSER CO. LTD., Forgings carbon9.60 Nagasaki carbon-manganese 9.60 alloy 9.60 6-50 Mizubori 2 - chome Nogata City Fukuoka Pref. Tel: +81 949 22 1385 Fax: +81 949 22 1386 email: [email protected] web: www.howser.co.jp Certificate No. MD00/1365/0006/3 Expiry date: 15/01/2017 JAPAN CASTING & FORGING CORPORATION Forgings carbon250.00 Nagasaki carbon-manganese 250.00 alloy 250.00 austenitic stainless 250.00 46-59, Sakinohama Nakabaru Tobata-Ku Kitakyushu City 804-8555 Including steelmaking

Tel: +81 93 884 0044 Fax: +81 93 873 1057

E-mail: [email protected] Website: www.jcfc.jp/e/

Certificate No. MD00/0790/0010/3 Expiry date: 26/04/2022

Materials Quality Scheme Approved - Approval No. MQS026 KANSAI TEKKO CO., LTD. Forgings carbon25.00 Kobe carbon-manganese 25.00 alloy 25.00 56 Kitahatsushima-cho Amagasaki-city Hyogo-ken Tel: +81 6 6487 0133 Fax: +81 6 6487 0137 email: [email protected] web: www.kansaitekko.co.jp

Certificate No. MD00/0824/0008/3 Expiry date: 24/10/2020

KOBE STEEL, LTD. Forgings carbon400.00 Kobe carbon-manganese 400.00 alloy 400.00 austenitic stainless 400.00

Page 44 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Steel Casting and Forging Plant 3-1, 2 Chome Shinhama Arai-cho Takasago-shi Tel: +81 794 45 7178 Fax: +81 794 45 7235

Email: [email protected]

Web http://www.kobelco.co.jp

Including steelmaking 40CrMo8 high strength low alloy steel with tensile strength above 950MPa accepted for approved applications

Solid built crankshafts with a K factor > 1.0 for approved applications. Die Forged Semi built up crank throws up to 90T types S42MC-C and S50MC-C

MQS Approved - Approval No. MQS 053

Certificate No. MD00/0867/0011/3 Expiry date: 26/10/2021 METALFORGE CORPORATION Forgings carbon0.06 Nagasaki carbon-manganese 0.06 alloy 0.06 10787-2, Ozue, Oaza Kadokawa Kadokawa-cho, Higashi Usuki-gun Miyazaki-Pref. 889-0611 Tel: +81 982 63 7001 Fax: +81 982 63 7005 email: [email protected] web: www.metalforge.co.jp/ Certificate No. MD00/3871/0005/3 Expiry date: 02/01/2020 MIKI FORGING CO., LTD. Forgings carbon3.00 Kobe carbon-manganese 3.00 alloy 3.00 8-29, 5-chome Takeshima Nishiyodogawa-ku Osaka City Tel: +81 6 6472 2931 Fax: +81 6 6475 3116 email: [email protected] Web: www.mikitankou.co.jp Certificate No. MD00/1019/0007/3 Expiry date: 23/07/2019 MITSUI MEEHANITE METAL CO., LTD. Forgings carbon5.30 Kobe alloy 5.30 TAMANO STEEL CASTING DIVISION 3-1-1, Tama Tamano City Okayama Pref. 706-8651 Tel +81 (0)863 23 2685 Fax +81 (0)863 23 2698 Email: mailto:[email protected] Certificate No. MD00/1309/0008/3 Expiry date: 03/11/2021

MIYAZAKI IRON WORKS CO., LTD. Forgings carbon5.00 Kobe alloy 5.00 8-6, 3 Chome Mitejima Nishiyodogawa-ku Osaka Tel: +81 6 6474 5331 Fax: +81 6 6472 2789 Email: mailto: [email protected] Certificate No. MD00/1039/0007/3 Expiry date: 02/07/2019

NAITO TANZOSHO CO., LTD. Forgings carbon13.40 Nagasaki carbon-manganese 13.40 alloy 10.60 austenitic stainless 5.00 268 Akaji, Oaza, Kotake-machi Kurate-gun Fukuoka Pref. 820-1102 Tel: +81 (0)949 22 5311 Fax: +81 (0)949 28 1565 Email mailto:[email protected] Certificate No. MD00/1059/0008/3 Expiry date: 08/12/2019 Web: http://www.naitotanzo.co.jp NAKAJIMA SANGYO CO., LTD. Forgings carbon1.50 Yokohama carbon-manganese 1.50 austenitic stainless 1.50

Page 45 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office 2-6-9, Keihinjima Ohta-ku Tokyo 143-0003 Tel: +81 (0)3 3790 0511 Fax: +81 (0)3 3790 0510 Email; mailto:[email protected] Web: http://www.nax.co.jp Certificate No. MD00/1060/0008/3 Expiry date: 03/07/2017

NIPPON KOSHUHA STEEL Co., Ltd. Forgings carbon12.50 Yokohama carbon-manganese 12.50 alloy 12.50 austenitic stainless 12.50 Toyama Works 10-15, 3-chome Hachiman-machi Imizu Toyama Including steelmaking and Ingot (up to 40 ton) as semi-product Tel: +81 766 84 3182 Fax: +81 766 84 3190 Web: http://www.koshuha.co.jp Certificate No. MD00/1086/0008/3 Expiry date: 16/04/2021

NIPPON STEEL CORPORATION Forgings carbon7.50 Kobe carbon-manganese 7.50 alloy 7.50 austenitic stainless 7.50 Pipe & Tube Unit Amagasaki Works 1, Nishino-cho Higashi-Mukojima Amagasaki, 660-0856 Tel: +81 (0)6 6411 7616 Fax: +81 (0)6 6411 7612 Email: :[email protected] Certificate No. MD00/1458/0010/3 Expiry date: 13/11/2019 NIPPON STEEL CORPORATION Forgings carbon40.00 Kobe carbon-manganese 40.00 alloy 40.00 Osaka Steel Works 5-1-109, Shimaya Konohana-ku Osaka 441-8510 Tel: +81 66466 6119 Fax: +81 66466 6217 email: [email protected]

Certificate No. MD00/1778/0011/3 Expiry date: 18/07/2020 Including steelmaking and crankshafts with K1 factor = 1.05 for approved applications OHMI PRESS WORKS & FORGING CO., LTD. Forgings carbon25.00 Kobe carbon-manganese 25.00 alloy 25.00 Shigaraki Plant 138 Kinose Shigaraki-cho, Koka-shi Shiga 529-1802 Tel: +81 0748 83 1511 Fax: +81 0748 83 1312 web: www.omitanko.co.jp Certificate No. MD00/1138/0008/3 Expiry date: 15/11/2021 OKAMOTO IRON WORKS CO. Forgings carbon25.00 Kobe carbon-manganese 25.00 alloy 25.00 austenitic stainless 25.00 2-3 2-chome Higashidemachi Hyogo-ku Kobe Tel: +81 (0)78 681 0271 Fax: +81 (0)78 681 7344 email: [email protected] Certificate Number: MD00/1142/0009/3 Expiry: 03/05/2022 ONOHARA IRON WORKS CO., LTD. Forgings carbon3.50 Nagasaki carbon-manganese 3.50 alloy 3.50 austenitic stainless 3.50 155 Akazi Nogata City Fukuoka Pref. 822-0012 Tel: +81 949 24 0392 Fax: +81 949 24 0382 email:[email protected] web: onohara-iw.co.jp Certificate No. MD00/1149/0007/3 Expiry date: 05/11/2019

Page 46 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office PACIFIC STEEL MFG. CO., LTD. Forgings carbon38.00 Yokohama carbon-manganese 38.00 alloy 38.00 austenitic stainless 38.00 1-93, Shimoshin Nissomachi Toyama-city Toyama Pref Tel: +81 (0)76 432 4096 Fax: +81 (0)76 441 8226 Email: [email protected] Web: www.pacificsteelmfg.co.jp Including steelmaking Certificate No. MD00/1189/0009/3 Expiry date: 07/10/2021 RIKEN FORGE CO., LTD. Forgings carbon0.09 Yokohama carbon-manganese 0.09 alloy 0.09 Maebashi Plant 395-3, Motosohja-machi Maebashi-shi Gunma 371-0846 Tel: +81 272 51 1834 Fax: +81 272 51 0018

E-mail: [email protected]

Certificate No. MD00/1243/0008/3 Expiry date: 05/01/2021

SANYO SPECIAL STEEL CO., LTD., Forgings carbon6.00 Kobe carbon-manganese 6.00 alloy 6.00 3007 Nakashima Shikama-ku Himeji-shi 672-8677 Tel: +81 (0)792 35 6029 Fax: +81 (0)792 35 6027 email: [email protected] web: www.sanyo-steel.co.jp

Approval includes steelmaking.

Heat treatment sub contracted to Toyo Metal Treating Corporation, Takasago Plant No. 2, Takasago, Hyogo Pref., Japan. Certificate No. MD00/1307/0009/3 Expiry date: 30/10/2019 SASEBO HEAVY INDUSTRIES CO., LTD. Forgings carbon45.00 Nagasaki carbon-manganese 45.00 alloy 17.30 1, Tategami-cho Sasebo City Nagasaki Pref. 857-8501 Tel: +81 956 25 9188 Fax: +81 956 25 9189

Including crankshafts with K factor > 1.0

Certificate No. MD00/1310/0010/3 Expiry date: 09/12/2020

SEO KOATSU KOGYO CO., LTD. Forgings carbon1.00 Kobe carbon-manganese 1.00 alloy 1.00 austenitic stainless 1.00 Ichikawa Works 869-20 Aza Kanzaki Ichikawa-cho Kanzaki-gun Hyogo-pref Tel: +81 790 28 0590 Fax: +81 790 28 1140 Certificate No. MD00/1338/0008/3 Expiry date: 10/11/2019

SHIMIZU STEEL CO., LTD. Forgings carbon20.00 Yokohama carbon-manganese 20.00 alloy 20.00 Utsunomiya Plant, 8-4, Kiyohara Industrial Park Utsunomiya-shi Tochigi-ken 321-3231 Tel: +81 (0)286 67 5511 Fax: +81(0) 286 67 3219 Email: [email protected] Certificate No. MD00/1357/0008/3 Expiry date: 16/10/2021

Page 47 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office SHINAGAWA FORGING CO., LTD. Forgings carbon1.80 Yokohama carbon-manganese 1.80 alloy 1.80 Mito Factory 654, Kogyodanchi Hitachiomiya-shi Ibaraki Pref. 319-2134 Tel: +81 295 53 6001 Fax: +81 295 53 6100 email: [email protected] Certificate No. MD00/1362/0008/3 Expiry date: 23/01/2022 SNT Corporation Forgings carbon0.12 Yokohama carbon-manganese 0.12 3333-3, Kamitezuna Takahagi-shi Ibaraki-ken 318-0004 Tel: +81 (0)293 23 5321 Fax: +81 (0)293 23 5323 email: [email protected] Certificate No. MD00/1279/0007/3 Expiry date: 05/05/2019 SUMIJU PRECISION FORGING CO., LTD. Forgings carbon0.12 Yokohama carbon-manganese 0.12 alloy 0.12 austenitic stainless 0.12 19 Natsushima-cho Yokosuka-shi Kanagawa 237-8555 Tel: +81(0)46 869 1790 Fax: +81 (0)46 869 1815 Email mailto:[email protected] Web: http://www.spf.shi.co.jp Certificate No. MD00/1451/0008/3 Expiry date: 20/01/2020 SUNNAN IRON WORKS CO., LTD Forgings carbon15.00 Yokohama carbon-manganese 15.00 alloy 15.00 4-2-20, Nakaminato Yaizu-shi Shizuoka-ken 425-0021 Tel: +81 54 628 6351 Fax: +81 54 629 6570 email: [email protected] web: www.sunnan.co.jp Certificate No. MD00/4085/0004/3 Expiry Date: 24/09/2021 TECHNO-METAL CO., LTD Forgings alloy0.60 Yokohama Nihonmatsu Plant Takada 100, Nihonmatsu, Fukushima Pref., 964-8585, Scope of approval covers for continuous grain flow crankshafts to 600kgs

Tel: +81 243 23 8152 Fax: +81 243 23 8711 email: [email protected] web: www.t-metal.jp

Certifcate No: MD00/3794/0004/3 Expiry date: 20/11/2021

THE ENDO CO., LTD. Forgings carbon-manganese10.00 Kobe alloy 10.00 Shimane Plant 1128-4 Eshima Yatsuka-cho Matsue city Shimane-pref. 690-1401 Tel: +81 852 76 3561 Fax: +81 852 76 3507 email: [email protected] Including crankshafts with K1 factor = 1.05 for approved applications.

Certificate No. MD00/1502/0007/3 Expiry date: 15/12/2019 THE JAPAN STEEL WORKS, LTD. Forgings carbon350.00 Yokohama carbon-manganese 350.00 alloy 350.00 austenitic stainless 350.00 Muroran Plant 4, Chatsu-machi Muroran Hokkaido 051-8505 Tel +81 (0)143 22 0451 Fax +81 (0)143 22 5736 Email: https://www.jsw.co.jp/en/contact/ Including continuous grain flow crankshafts with K factor 1.05 for approved applications. Certificate No. MD00/1507/0009/3 Expiry date: 08/11/2021

Page 48 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office YAMASHITA TANZOSHO CO., LTD. Forgings carbon2.00 Kobe carbon-manganese 2.00 alloy 2.00 austenitic stainless 2.00 43-1 Ikuno 6 Chome Katano Osaka pref. Tel: (0)72 891 1421 Fax (0)72 892 2126 Certificate No. MD00/3249/0005/3 Expiry date: 20/07/2021 YAMAZAKI MACHINERY MFG. CO., LTD. Forgings carbon1.00 Kobe carbon-manganese 1.00 alloy 1.00 austenitic stainless 1.00 3-2 Hie Konan City Shiga Pref. Tel +81 748 75 1187 Fax: +81 748 75 1549

E-mail: [email protected]

Web site: www.buhin.co.jp Certificate No. MD00/1688/0010/3 Expiry date: 05/05/2020

Korea

CALTEK CO., LTD. Forgings carbon2.00 Busan Port carbon-manganese 2.00 alloy 2.00 1077, Gimhae-daero Hallim-myeon Gimhae-si Gyeongsangnam-do Tel: +82 55 346 1458 Fax: +82 55 346 1422 Email: [email protected] Certificate No. MD00/4404/0003/3 Expiry date: 03/11/2020

DAE CHANG FORGING CO., LTD. Forgings alloy0.55 Busan Port 115-92 Bongnim-ro, Saengnim-myeon, Gimhae-si, Gyeongsangnam-do, Tel: +82 55 310 6825 Fax: +82 55 329 3911 email: [email protected] web: www.dcf.co.uk Approval is restricted to Connecting Rod forgings and Connecting Rod type forgings to the above maximum weight but includes for continuous grain flow Crankshafts to a maximum weight of 170kgs. Certifcate Number: MD00/3742/0005/3 Expiry: 15/02/2022

DAE HEUNG IND. CO. LTD. Forgings carbon5.00 Busan Port carbon-manganese 5.00 alloy 5.00 austenitic stainless 2.00 HALLIM FACTORY 135, Gimhae-daero974beon-gil Hallim-myeon, Gimhae-si Gyeongsangnam-do Tel: +82 55 310 6770 Fax: +82 55 3106720 Email: [email protected] Web: http://daeheungind.kr Certificate No. MD00/4249/0003/3 Expiry date: 04/11/2019 Approved for copper alloy forgings with the maximum weight of 250kg DONGYANG ENERGY & COMPONENTS CO. LTD. Forgings carbon20.00 Ulsan carbon-manganese 20.00 alloy 20.00 austenitic stainless 24.08 Pohang Plant #177, CHeolgangsandan-ro, 130Beon-gil, Daesong-myeon, Nam-gu, Pohang City,Gyeongbuk Tel No. +82 542 80 3371 Fax No +82 54 275 7140 email: [email protected] web www.dongyangenc.com Certificate Number MD00/3724/0004/3 Expiry date: 19/12/2021

DOOSAN HEAVY INDUSTRIES & CONSTRUCTION CO., LTD. Forgings carbon300.00 Changwon carbon-manganese 300.00 alloy 300.00 austenitic stainless 300.00

Page 49 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Changwon Plant 22, Doosanvolvo-ro, Seongsan-gu, Changwon, Kyungnam, Tel +82 55 278 4746 Fax no. +82 55 278 8506 [email protected] web www.doosanheavy.com Approval includes semi-built crankshafts. Certificate No. MD00/0883/0008/3 Expiry date: 06/03/2022

FORMETAL Co., Ltd. Forgings carbon0.07 Seoul carbon-manganese 0.07 alloy 0.07 229-7, Mujangsaneop-ro, Jigok-myeon, Seosan-si, Chungcheongnam-do, Tel: +82 41 670 6251 Fax: +82 41 668 7317 email: [email protected] web: formetal.co.kr Certificate No. MD00/4233/0002/3 Expiry Date: 07/10/2019 Felix Technology Co., Ltd. Forgings carbon2.60 Busan Port carbon-manganese 2.60 alloy 2.20 austenitic stainless 2.00 duplex stainless* 1.50 85 Mieumsandan 3-ro, Gangseo-gu, Busan, 618-220 Including ring rolling to 2500 mm diameter.

Tel: +82-51-796-7870 Fax: +82-51-796-7897 email: [email protected]

Certificate No. MD/00/4269/0002/3 Expiry Date: 16/12/2019 GISAN FORGING CO., LTD Forgings carbon9.00 Busan Port carbon-manganese 9.00 alloy 4.50 13 Gimhae-daero, 1538 beon-gil, Hallim-myeon, Gimhae-si, Gyeongsangnam-do, Tel: +82 55 722 3000 Fax: +82 55 722 3002 email: [email protected] web: www.gisan-forgjng.com

Certificate Number: MD/00/3938/0004/3 Expiry date: 30/07/2020 HAE WON SPECIAL FORGING CO., LTD. Forgings carbon21.00 Busan Port carbon-manganese 21.00 alloy 21.00 16 Gimhae-daero 1099 beon-gil Hallim-myeon Gimhae-si Gyeongnam Tel: +82 (0)55 343 2355 Fax: +82 (0)55 343 2366 Mobile: +82 010 4141 7669 Email to: [email protected]

Certificate No. MD00/3245/0006/3 Expiry date: 13/07/2021 HANIL FORGING IND. CO., LTD. Forgings carbon0.08 Changwon carbon-manganese 0.08 alloy 0.08 42, Road 97, Sungju-ro Sungsan-gu, Changwon, Tel: +82 55 239 3063 Fax: +82 55 284 7023

Web: www.hifg.co.kr Certificate No. MD00/3576/0003/3 Expiry date: 28/03/2018 HANIL FORGING IND. CO., LTD. Forgings carbon4.00 Seoul carbon-manganese 4.00 alloy 4.00 austenitic stainless 4.00

Page 50 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office (JINCHEON PLANT) 87, Seupji-Gil, Ducksan-myun, Jincheon-gun, Chungbuk, Tel: +82 43 536 5181 Fax: +82 43 536 5172 email: [email protected] web: www.hifg.co.kr

Certificate No: MD00/4396/0001/3 Expiry Date: 19/10/2017 HY-LOK FORGING CORPORATION Forgings carbon0.02 Changwon carbon-manganese 0.02 austenitic stainless 0.02 duplex stainless 0.02 140, Tekeunobaelli-ro, Jillye-myeon, Gimhae-si, Gyeongsangnam-do Tel: +82 (0)55 343 1520 Fax: +82 (0)55 343 1540 [email protected] http://www.hy-lokforging.com/

Certificate No: MD00/4787/0001/3 Expiry Date: 09/07/2021 HYUNDAI FORGING CO., LTD. Forgings carbon38.00 Changwon carbon-manganese 38.00 alloy 20.00 austenitic stainless 6.50 146-1, Hyeonpo-ro 146-1, Hyeonpo-ro, Gunbuk-myeon Haman-Gun Tel: +82 55 580 6533 Fax: +82 55 580 6520 Email mailto:[email protected] Web: http://www.hd-forginf.co.kr Approval is restricted to the supply of forged shafts and bars. Certificate No. MD00/3122/0005/3 Expiry date: 08/12/2019 HYUNDAI STEEL COMPANY Forgings carbon80.00 Changwon carbon-manganese 80.00 alloy 60.00 46, Yulchonsandan 5-ro Haeryong-myeon Suncheon City, Jeollanam-do Zip code: 540856 Tel: +82 61 760 7100 Fax: +82 61 725 7733 email: [email protected] web: www.sppycenergy.co.kr Certificate Number: MD00/3866/0009/3 Expiry date: 11/12/2019

Including Carbon Manganese steel crank throw forgings in Normalised and Normalised and Temepered condition to 26 Tonne.

Approval for C/CMn forgings above 18T weight covers for supply in the Normalised and Normalised and Tempered supply conditions only. HYUNJIN MATERIALS CO., LTD. Forgings carbon30.00 Busan Port carbon-manganese 30.00 alloy 30.00 92, Noksansandan 289-ro Gangseo-Gu Busan Tel: +82 51 602 7753 Fax: +82 51 602 7779 Web:http://www.hjmco.co.kr

E-mail: mailto:[email protected]

Certificate No. MD00/0732/0011/3 Expiry date: 15/03/2022

HYUNJIN MATERIALS CO., LTD. Forgings carbon80.00 Busan Port carbon-manganese 80.00 alloy 80.00 63, Noksanhwajeon-ro Gangseo-gu Busan Including semi built and continous grain flow crankshafts (CGF). CGF crankshafts approved with an enhanced K factor of 1.05.

Tel: +81 51 602 7856/5 Fax: +81 51 602 7779

E-mail: [email protected] Website: www.hjmco.co.kr

Certificate No. MD00/3329/0008/3 Expiry date: 15/03/2022

Page 51 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office INNO STEEL CO., LTD. Forgings carbon12.00 Busan Port carbon-manganese 12.00 alloy 12.00 62 Angok-ro 333beon-gil Hallim-myeon, Gimhae-si, Gyeongsangnam-do Tel. +82 (0)55 342 3656 Fax +82 (0)55 342 3682 email:[email protected] web: www.dasan.info Certificate No. MD00/2751/0011/3 Expiry date: 25/11/2021

JIN GWANG FORGING CO., LTD. Forgings carbon0.04 Busan Port carbon-manganese 0.04 alloy 0.02 austenitic stainless 0.04 #80-112, Golden root-ro, Juchon-myeon, Gyeongnam-do Tel No. 0082 55 329 6661 Fax No. 0082 55 329 6660 Email [email protected] Web www.jk6661.co.kr Cert No MD00/4192/0002/3 Expiry date: 27/06/2019 JUNG KWANG INDUSTRY CO., LTD Forgings carbon2.00 Busan Port carbon-manganese 2.00 alloy 2.00 21,Seobu-ro 378 Beon-gil Jinyeong-eup Gimhae-si Gyeongnam Tel: +82 55 344 0034 Fax: +82 55 344 2084 E-mail: [email protected]

Website: www.jung-kwang.com

Certificate No. MD00/3435/0005/3 Expiry date: 23/02/2020

K.S.P CO., LTD. Forgings carbon1.50 Busan Port carbon-manganese 1.50 alloy 1.50 austenitic stainless 1.50 43, Noksansandan381(sambaekpalsibil)-ro 86, Gangseo-Gu Busan Tel: +82 51 831 6270~7 Fax: +82 51 831 6256 Email: [email protected] Website:http://www.kspvalve.com Certificate No. MD00/2977/0006/3 Expiry date: 07/05/2021 KISCO Forgings carbon125.00 Changwon carbon-manganese 125.00 alloy 55.00 12, Gongdan-ro 103 beon-gil, Seongsan-gu Changwon Gyeongnam Tel +82 55 260 0740 Fax +82 55 266 3633 E-mail [email protected]

Website: www.kisco.co.kr

Approval Includes steelmaking

Certificate No. MD00/0884/0012/3 Expiry date: 23/11/2021 KOREA FLANGE Co. Ltd. Forgings carbon4.15 Ulsan carbon-manganese 4.15 alloy 0.17 austenitic stainless 4.15 duplex stainless* 0.70 45, Shinyeocheon-ro, 35 Bean-gil, Nam-Gu Ulsan Tel +82 52 279 4253 Fax +82 52 260 2670 eMail [email protected] Web www.kofco.com Certificate No. MD00/0882/0008/3 Expiry date: 20/03/2020

Page 52 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office KPF (Korea Parts & Fasteners) Forgings austenitic stainless0.02 Seoul 50, Chungjusandan 5-ro Chungju-si Chungcheongbuk-do 27327 Tel: +82 43 849 1152 Fax: +82 43 849 1233 Email:mailto:[email protected] Web: http://www.kpf.co.kr Certificate No. MD00/2841/0007/3 Expiry date: 19/06/2021

KYOUNGJIN FORGING CO., LTD. Forgings carbon-manganese0.02 Changwon austenitic stainless 0.01 32, 212 beon-gil, Bonsan-ro, Jinyeong-eup, Gimhae-si, Gyeongsangnam-do Tel: +82 55 345 6570 Fax: +82 55 345 3875 Email: [email protected] Web: www.kjforging.co.kr Certificate No. MD00/4835/0001/3 Expiry date: 01/02/2022

MYSCO CO., LTD. Forgings carbon52.70 Changwon carbon-manganese 52.70 alloy 52.70 austenitic stainless 20.00 49, Bonsan-ro, 193, Beon-gil, Jinyeong-eup, Gimhae-si, Gyeongnam. Tel No: +83 55 720 6140 Fax No: +83 55 720 6199 Email: [email protected] Web: www.mysco.co.kr Certificate No: MD00/3944/0003/3 Expiry date: 04/09/2017 NAM KYOUNG S.M. Co., Ltd. Forgings carbon5.00 Busan Port carbon-manganese 5.00 alloy 5.00 58, Yongdeok-ro 302 beon-gil Hallim-myeon, Gimhae-si Gyeongsangnam-do Tel: +82 55 346 6696 Fax: +82 55 346 6697 Email: mailto:[email protected] Website: www.namkyoungsm.co.kr Certificate No. MD00/3917/0004/3 Expiry date: 03/07/2020 PSM, INC. Forgings carbon30.00 Busan Port carbon-manganese 30.00 alloy 30.00 austenitic stainless 30.00 Nok San Factory 93, Noksanhwajeon-ro, Gangseo-Gu Busan Tel: +82 (0) 51 974 5874 Fax: +82 (0) 51 974 5885 Email: [email protected] Web: http://www.psminc.co.kr Certificate No. MD00/1779/0009/3 Expiry date: 04/09/2021 SAM BOO METAL CO., LTD. Forgings carbon21.00 Changwon carbon-manganese 21.00 alloy 21.00 278-11, Yongjeonsaneopdanji-gil, samnangjin-eup, Miryang-si, Gyeongnam Tel +82 (0)55 802 7700 Fax: +82 (0)55 802 7772 Email: [email protected] Web: www.samboometal.com Certificate No. MD00/2933/0006/3 Expiry date: 06/11/2020 SAMBU STAINLESS FORGING CO., LTD. Forgings carbon6.67 Busan Port carbon-manganese 6.67 alloy 6.67 austenitic stainless 6.67 duplex stainless* 6.67 #596-14 Hwajeon-Dong, Kangseo-Gu, Busan Tel No: +82 51 316 3241 Fax No: +82 51 316 3242

Email: [email protected]

Web: www.sambust.co.kr

Certificate No: MD00/4275/0002/3 Expiry Date: 28/12/2019

Page 53 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office SAMMI METAL PRODUCTS CO., LTD. Forgings carbon0.23 Changwon carbon-manganese 0.23 alloy 1.20 martensitic stainless* 0.02 55, Sungsan-dong Changwon-city Kyungnam 641-315 Including Closed die continuous grain flow alloy steel crankshafts with a K factor K1 = 1.05 Tel: +82 55 269 0852 Fax: +82 55 282 9204

E-mail: [email protected]

Web:www.sammiforge.co.kr Certificate No. MD00/1293/0008/3 Expiry date: 13/10/2019 SAMSHIN LIMITED Forgings carbon0.05 Seoul carbon-manganese 0.05 alloy 0.05 austenitic stainless 0.05 1138-11, Seongjin-Ro, Ipjang-Myeon, Seobuk-Gu, Cheonan-Si. Tel: + 82-41-560-6000 Fax: +82-41-561-1950

Website: www.samshinvalves.co.kr

Certificate No: MD00/4735/0001/3 15/11/2017

SEOHAN ENP CO., LTD. Forgings carbon57.00 Ulsan carbon-manganese 57.00 alloy 34.70 #173-47, Yongmyeong-ri, Geoncheon-eup, Gyeongju-si, Gyeongbuk, 780-903, Tel: +82 707 404 6210 Fax: +82 54 620 3141

email [email protected]

Web http://www.seohanenp.com Certificate No. MD00/3661/0006/3 Expiry date: 21/08/2021 SHIN WOO METAL CO., LTD. Forgings carbon10.00 Changwon carbon-manganese 10.00 alloy 10.00 austenitic stainless 10.00 HAMAN FACTORY 10, Hamansandan 3-gil Gunbuk-myeon, Haman-Gun Gyeongsangnam-do Tel No: +82 55 585 2830 Fax No:+82 55 585 2836 Email: [email protected] Web: www.shinwoometal.co.kr Certificate No: MD00/4600/0001/3 Expiry Date 28/07/2019 SYF Co., Ltd. Forgings carbon7.00 Busan Port carbon-manganese 7.00 alloy 7.00 austenitic stainless 7.00 410, Bonglim-Ri Saengrim-Myun Kimhae-Si Kyungnam Tel: +82 55 329 3520 Fax: +82 55 728 3524 Email: [email protected] Certificate No. MD00/0367/0008/3 Expiry date: 09/02/2020 SeAH BESTEEL CORPORATION Forgings carbon110.00 Mokpo carbon-manganese 110.00 alloy 110.00

Page 54 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Gunsan Plant 522, Oehang-ro Gunsan-si Jeollabuk-Do Tel: +82 63 460 8216 Fax: +82 63 460 8423 email: [email protected] web: www..seahbestell.co.kr

Certificate No. MD00/1749/0011/3 Expiry date: 02/04/2021

Including combined web and pin forgings for semi built crankshafts in Carbon Manganese steel, supplied in Normalised or Normalised and Tempered condition, up to 48.3T weight. SeAH CHANGWON INTEGRATED SPECIAL STEEL Forgings carbon90.00 Changwon carbon-manganese 90.00 alloy 30.00 austenitic stainless 8.00 CORPORATION 147,Jeokhyeon-Ro Seongsan-Gu Changwon, Gyeongnam Tel: +82 (0)55 269 6727 Fax: +82 (0)55 269 6907 Emal:mailto:[email protected] Web: http://www.poscoss.com Including steelmaking Certificate No. MD00/1294/0014/3 Expiry date: 08/09/2020

TAE HEUNG FORGING. CO., LTD Forgings carbon5.00 Busan Port carbon-manganese 5.00 alloy 4.00 austenitic stainless 2.00 #413-2 Saengnim-daero Gimhae-Si, Gyeongsangnam-Do, Tel: +82 55 329 2841 Fax: +82 55 329 2844 Email: [email protected] Web: http://www.thf.co.kr Approval includes for heat treatment carried out internally and sub-contract by Dae Chang Metal Heat Treatment Co. Ltd of #1494-4, Songgok-ri, Dassan-Myeun, Goryung-Gun, Kyung Buk, Korea. Certificate Number: MD00/3838/0003/3 Expiry date: 21/09/2019 TAE HUNG METAL CO. Forgings carbon0.02 Busan Port carbon-manganese 0.02 alloy 0.02 970 Beon-Gil (Rd.) 55 Nakdong-daero (Blvd,) Sasang-gu Busan Tel: +82 51 311 5803 Fax: +82 51 325 8213 Email: mailto: [email protected] Certificate Number: MD00/3474/0005/3 Expiry: 31/05/2020

TAESANG CO., LTD. Forgings carbon8.00 Busan Port carbon-manganese 8.00 alloy 8.00 austenitic stainless 8.00 30, Dasan-ro, 176beongil, Saha-gu, Busan, Tel +82 (0)51 209 9044 Fax +82 (0)51 209 9001 Email mailto:[email protected]. Website: http;//www.taesang.co.kr Certificate No. MD00/1476/0012/3 Expiry date: 04/06/2019

TAEWOONG CO., LTD. Forgings carbon130.00 Busan Port carbon-manganese 130.00 alloy 60.00 austenitic stainless 60.00 Noksan Factory Noksan National Industrial Complex 67, Noksansandan 27-ro, Gangseo-Gu, Busan Tel: +82 51 329 5105 Fax: +82 51 329 5101

Email: [email protected] Web http://www.taewoong.com

Certificate No. MD00/2833/0007/3 Expiry date: 07/10/2019

WONIL F & T CO., LTD. Forgings carbon7.00 Busan Port carbon-manganese 7.00 alloy 6.00 austenitic stainless 3.00 duplex stainless* 1.92

Page 55 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office 468, Angok-ro, Hallim - myeon, Gimhae-si, Gyeongsangnam-do Tel No: +881 55346 0680 Fax No:+81 55 346 4832

Email: [email protected]

Certificate No: MD00/4208/0004/3 Expiry Date: 21/07/2019

WOOSUNG COMPANY Forgings carbon0.01 Busan Port carbon-manganese 0.01 7, Dasan-Ro 208 Beon-gil Saha-Gu Tel: +51 265 7466 Fax: +51 265 7468 Email: mailto:[email protected] Web http://www.wsdf.co.kr Certificate No. MD00/3207/0006/3 Expiry date: 11/12/2020 YCF CO., LTD. Forgings carbon14.00 Busan Port carbon-manganese 14.00 alloy 8.00 austenitic stainless 7.20 31-3, Anha-ro 116 beon-gil Hallim-myeon Gimhae-si Gyeongsangnam-do Tel: +82 055 724 9200 Fax: +82 055 724 9208

email: [email protected]

Certificate No. MD00/4322/0004/3 Expiry Date: 09/04/2022

YOUNG JIN FORGING CO., LTD. Forgings carbon5.20 Changwon carbon-manganese 5.20 alloy 5.20 No 791-2, Yongsan-Ri Chilwon-myeon Haman-gun Gyeongnam Tel: +82 55 239 5581 Fax: +82 55 282 2676 Email: [email protected] Web: http://www.yjforging.co.kr Certificate No. MD00/4583/0001/3 Expiry date: 22/05/2019

Mexico

FRISA FORJADOS S.A.DE C.V. Forgings carbon5.00 Veracruz carbon-manganese 5.00 alloy 5.00 austenitic stainless 5.00 duplex stainless* 5.00 martensitic stainless* 5.00 Valentin G. Rivero 127 Col. Los Treviño Santa Catarina N.L. 66350 Tel: +52 81 8153 0300 ext. 2046 Fax: +52 81 8336 2175 Email: [email protected] Web: http://www.frisa.com *accepted for approved applications Certificate Number: MD00/2788/0006/3 Expiry: 25/03/2019 THYSSENKRUPP METALURGICA DE MEXICO S.A. de C.V. Forgings carbon0.02 Veracruz carbon-manganese 0.02 Camino a Santa Agueda 1 San Miguel Xoxtla Puebla CP 72620 Tel:+52 222 223 7042 Fax: +52 222 223 7040 Email: [email protected] Web www.thyssenkrupp-metalurgica.com Including connecting rods made of microalloyed steel using controlled cooling. Certificate No. MD00/3092/0004/3 Expiry date: 07/07/2019

Page 56 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Montenegro

TOSELIK NIKŠI d.o.o. Forgings carbon6.00 Beograd carbon-manganese 6.00 alloy 6.00 Vuka Karadzica bb, 81400 Niksic Tel: +382 40 202 222 email: [email protected] Certificate No: MD00/4508/0002/3 Expiry Date: 02/09/2021

Norway

STAVANGER STEEL AS Forgings carbon5.00 Stavanger carbon-manganese 5.00 alloy 5.00 austenitic stainless 5.00 duplex stainless 5.00 martensitic stainless* 5.00 precipitation hardened 5.00 stainless* Staalverksvegen 51 N-4100 Jørpeland Tel +47 51 74 34 00 Mob: +47 907 47 955 email: [email protected] web: www.stavangersteel.no

* accepted for approved applications Certificate No. MD00/1313/0008/3 Expiry date: 14/08/2017

Poland

ALCHEMIA S.A. Forgings carbon11.00 Katowice carbon-manganese 11.00 alloy 11.00 austenitic stainless 11.00 ODDZIAL KUZNIA BATORY W CHORZOWIE ul.Stalowa 1 41-506 Chorzów Tel: +48 32 7937799 Fax: +48 32 7500669 Mobile: +48 698 665 906 Email: [email protected] web: www.kuzniabatory.pl Certificate No. MD00/2879/0008/3 Expiry date: 29/09/2019 ATI ZKM Forging Sp. z o.o. Forgings carbon0.30 Katowice carbon-manganese 0.30 alloy 0.30 ul. Grabskiego 54 37-450 Stalowa Wola Tel: +48 15813 4337 Fax: +48 15813 5617 Email: [email protected] Web: http://www.ATImetals.com Certificate No. MD00/2904/0007/3 Expiry date: 25/05/2020 CELSA "HUTA OSTROWIEC" Sp. z o.o. Forgings carbon125.00 Katowice carbon-manganese 125.00 alloy 125.00 ZAKLAD WYROBOW KUTYCH ul. Samsonowicza 2 27-400 Ostrowiec Swietokrzyski Tel: +48 (0)41 249 2905

E--mail: [email protected] Website: www.celsaho.com

Including crankshafts with K factor > 1.0 for approved applications

Certificate No. MD00/2006/0010/3 Expiry date: 24/10/2019

Page 57 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office HSW - KUZNIA STALOWA WOLA Sp. z o.o. Forgings carbon10.00 Katowice carbon-manganese 10.00 alloy 10.00 ul. Kwiatkowskiego 1 37-450 Stalowa Wola Tel: +48 15 813 56 64 +48 15 8135410 Fax: +48 15 813 54 70

E-mail: [email protected] [email protected]

Website: www.kuzniastalowola.pl

Certificate No. MD00/2407/0007/3 Expiry date: 15/05/2020 HUTA BANKOWA Sp. z o.o. Forgings carbon3.00 Katowice carbon-manganese 3.00 alloy 3.00 ul. Sobieskiego 24 41-300 Dabrowa Górnicza Tel +48 32 295 7430 Fax +48 32 262 3788 Email: [email protected]; [email protected] Web http://www.hutabankowa.com.pl Certificate No. MD00/0716/0005/3 Expiry date: 03/03/2022

The scope of approval covers only the manufacturer of ring type forgings with the maximum diameter of 300 mm

KUZNIA "GLINIK" Sp. z o.o. Forgings carbon1.50 Katowice carbon-manganese 1.50 alloy 1.50 ul. Chopina 33a 38-320 Gorlice Tel: +48 18 35 49 525 Fax: +48 18 35 49 504

E-mail: [email protected]

Website: www.kuznia.glinik.pl Certificate Number: MD00/2131/0009/3 Expiry: 20/09/2021 KUZNIA JAWOR S.A. Forgings carbon0.03 Katowice carbon-manganese 0.03 alloy 0.03 austenitic stainless 0.03 59-400 Jawor ul. Kuziennicza 4 Tel +48 (0)76 8707607 Fax: +48 (0)76 8702782 email: [email protected] web: www.kuznia.com.pl

Certificate No. MD00/2931/0006/3 Expiry date: 17/11/2020 PRZEDSIEBIORSTWO ROBOT INZYNIERYJNYCH Forgings carbon0.18 Katowice carbon-manganese 0.18 alloy 0.18 "MINEC" Sp. z.o.o. KUZNIA ,,MINEC" ul. Metalowcow 4 41-500 Chorzow Tel: +48 32 3453125 (ext.66) Fax:+48 32 3453125 (ext.60) Email: [email protected] or [email protected] Web: http://www.minec.pl Certificate Number: MD00/4147/0002/3 Expiry: 15/04/2019

ZARMEN FPA Sp.z o.o. Forgings carbon28.00 Katowice carbon-manganese 28.00 alloy 28.00 ul. Filarskiego 39 37-330 Zdzieszowice Tel: +48 77 5457008 Fax: +48 77 5457099 Email: [email protected] Web www.zarmenfpa.pl Certificate No. MD00/3455/0005/3 Expiry date: 05/04/2020

Page 58 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Romania

DOOSAN IMGB S.A Forgings carbon100.00 Galatz carbon-manganese 100.00 alloy 100.00 Berceni Road Nr. 104 Sector 4 041919 Bucharest Tel: +40 21 301 2849 Fax: +40 21 301 2502

Email: [email protected]

Website: www.doosanimgb.com

Including steelmaking.

Certificate No. MD00/1259/0011/3 Expiry date: 08/09/2020 S.C. FORJA NEPTUN S.R.L. Forgings carbon2.50 Galatz carbon-manganese 2.50 alloy 2.00 Str. Infratirii nr. 295 105200 Baicoi Tel +40 244 307150(82) Fax +40 244 307152 email [email protected] web www.forjaneptun.ro Certificate No. MD00/3324/0006/3 Expiry date: 08/03/2022 S.C. FORJA ROTEC S.R.L. Forgings carbon5.00 Galatz carbon-manganese 5.00 alloy 5.00 austenitic stainless 2.00 duplex stainless 1.00 martensitic stainless* 2.50 12 Aleea Industriilor Street, 120068 Buzau, Tel: +40 238 406 046 Fax: +40 238 718 935 email: [email protected] web: www.forjarotec.ro

Certificate No: MD00/4475/0002/3 Expiry Date: 25.04.2021

S.C. FORSEV S.A. Forgings carbon0.45 Galatz carbon-manganese 0.45 alloy 0.45 2, Portile de Fier Street 220242, Drobeta Turnu-Severin Jud. Mehedinti Tel: +40 (0)252 326 890 Fax: +40 (0)252 326 002 Email: mailto: [email protected] and [email protected] Web www.forsev.ro Certificate No. MD00/3008/0005/3 Expiry date: 20/09/2018 S.C. MENAROM P.E.C Forgings carbon3.20 Galatz carbon-manganese 3.20 alloy 3.20 12 Calea Prutului Street 800219-Galatz Tel +40 236 448931 Fax: +40 236 448257 Email: [email protected] Web: http://www.menarom.ro Certificate No. MD00/2847/0007/3 Expiry date: 29/11/2019

VILMAR S.A. Forgings carbon4.00 Galatz carbon-manganese 4.00 alloy 1.00 austenitic stainless 1.00 duplex stainless 1.00 Forging Division No. 1, Platforma Industriala Street 240050, Râmnicu-Vâlcea Tel: +40 250 703 850 Fax: +40 250 703 865 Email: [email protected] Web: http://www.genoyer.ro * accepted for approved applications Certificate No. MD00/2063/0008/3 Expiry date: 19/02/2021

Page 59 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Russia

CHELYABINSK METALLURGICAL PLANT PAO Forgings carbon10.00 St. Petersburg carbon-manganese 10.00 alloy 10.00 URALS STAMPING PLANT OAO, CHELYABINSK BRANCH 454047-Chelyabinsk 2-d Paveletskaya St - 14 Tel: +7 351 725 57 27 Fax: +7 351 725 51 76

E-mail: [email protected] Website www.mechel.ru

Head Office Mechel OAO , 123610, Moscow. Krasnopresnenskaya Naberezhnaya, 12, Office 1002 Russia

Certificate: MD00/3261/0009/3 Expiry date: 08/08/2021 CMK Forgings Ni Alloy200.00 St. Petersburg Pristansionnaya Street, Possession 2, 142800 Stupino, Moscow Region. Tel: +7 (496) 644 70 30 Fax: +7 (496) 644 70 02

E:mail: [email protected]

Website: www.cmkgroup.ru

Certificate No: MD00/4668/0001/3 Expiry Date: 05/03/2020 MOTOVILIKHA-GRAZHDANSKOYE MASHINOSTROENIE, LLC Forgings carbon9.20 St. Petersburg carbon-manganese 9.20 alloy 9.20 614014, Perm 1905 Street, 35 Tel +8 342 260 7317 Fax +8 342 260 7462 Email: [email protected] Web: http://www.mzperm.ru Certificate No. MD00/4608/0002/3 Expiry date: 08/09/2019 OMZ - Special Steels Forgings carbon120.00 St. Petersburg carbon-manganese 120.00 alloy 120.00 Izhorsky Zavod, Kolpino, Saint-Petersburg, 196650, Phone: +7 812 322 81 50 Fax: +7 812 322 81 07 email: [email protected] web: www.omz-specialsteel.com Including steelmaking Certificate No. MD00/2226/0007/3 Expiry date: 23/06/2019

Slovenia

METAL RAVNE d.o.o. Forgings carbon24.00 Zagreb carbon-manganese 24.00 alloy 24.00 austenitic stainless 24.00 Koroška cesta 14 2390 Ravne na Koroškem Tel: +386 2 870 7200 Fax: +386 2 870 7219 email: [email protected] Web: http://www.metalravne.com Certificate No. MD00/2889/0007/3 Expiry date: 30/05/2020

Spain

EUSKAL FORGING S.A. Forgings carbon10.00 Bilbao carbon-manganese 10.00 alloy 10.00 austenitic stainless 10.00 Gipuzcoa Poligono Industrial 20270 Irura 20270 Irura Gipuzcoa Tel: +34 943 691 412 Fax: +34 943 691 654 Email: [email protected] Web: www.euskalforging.com Certificate No. MD00/0541/0008/3 Expiry date: 23/04/2021

Page 60 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office EUSKAL FORGING S.A. Forgings carbon50.00 Bilbao carbon-manganese 50.00 alloy 50.00 Sestao Ribera de la Ria, Poligono s/n 48910 Sestao Vizcaya Tel No: +39 94 472 3062 Fax +39 94 495 0802 Email: [email protected] Web: www.euskalforging.com Certificate No: MD00/4301/0002/3 Expiry date 26/03/2020 FORGING PRODUCTS TRADING, SLL Forgings alloy0.05 Bilbao Barrio Arregi, s/n 48340 Amorebieta. Bizkaia. Tel: +34 94 630 0441 Fax: +34 94 630 0210 Email: [email protected] Web: http://www.forgingproducts.com Certificate No. MD00/4860/0001/3 Expiry date: 17/05/2022

FORJAS ALBISU S.A. Forgings carbon4.00 Bilbao carbon-manganese 4.00 alloy 4.00 C/Zubierreka Auzoa 12 P.O. Box 12 20210 Lazkao Guipuzcoa Tel. 943 16 41 42 Fax. 943 88 09 24 email: [email protected] Web http://www.forjasalbisu.com Certificate No. MD00/2796/0006/3 Expiry date: 12/05/2019 FORJAS DE CANTABRIA, S.L. Forgings carbon0.32 Bilbao carbon-manganese 0.32 alloy 0.32 Paseo Alejandro Calonge,1 39200 Reinosa Cantabria Tel: +34 9427 50354 Fax: +34 9427 54206 Email [email protected] Web:http://www.forjasdecantabria.com The scope of approval includes forged continuous grain flow crankshafts. Certificate Number: MD00/0335/0009/3 Expiry: 05/07/2020 GAINZA FORGE S.L. Forgings carbon10.00 Bilbao carbon-manganese 10.00 Barrio Agote n× 7 E-20740 Zestoa Guipuzcoa Tel: +34 943 14 78 71 Fax: +34 943 14 77 90 email: [email protected] web: www.gainzaforge.com

Certificate No. MD00/2576/0007/3 Expiry date: 17/08/2020 IRIZAR Forge (FORJAS IRIZAR) Forgings carbon5.00 Bilbao carbon-manganese 5.00 alloy 5.00 austenitic stainless 2.50 Hiribaren no. 26 20210 Lazkao Tel: +34 943 88 09 36 Fax: +34 943 88 95 72 Email: mailto:[email protected] Web: http://www.forjas-irizar.com The scope of approval is for heat treatment carried out by sub-contrcator Razya, S.A. San Miguel de Acha 7, 01010 Vitoria, Spain. Certificate No. MD00/2325/0008/3 Expiry date: 07/05/2020 SIDENOR Forgings & Castings S.L. Forgings carbon90.00 Bilbao carbon-manganese 90.00 alloy 90.00 austenitic stainless 90.00 Paseo Alejandro Calonje, 1 39200 Reinosa (Cantabria) Tel: +34 942 775 288 Fax: +34 609 242 896 email: borja.lambea@gsidenor com web www.sidenor.com

Certificate Number: MD00/0546/0011/3 Expiry: 17/06/2020 Including approval of semi built crankshafts with a K factor K1 = 1.05 - Plus surface deep rolling process K2 = 1.20

Page 61 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office ULMA Forja, S. Coop. Forgings carbon3.00 Bilbao carbon-manganese 3.00 austenitic stainless 3.00 duplex stainless 3.00 B° Zubillaga, 3 P.O. Box 14 20560 Oñati Guipúzcoa Tel: +34 943 780552 Fax: +34 943 781808 email: [email protected] Web: http://www.ulmapiping.es Certificate No. MD00/0430/0008/3 Expiry date: 22/05/2021 ULMA LAZKAO FORGING, S.L. Forgings carbon0.75 Bilbao carbon-manganese 0.75 alloy 0.75 austenitic stainless 0.75 Zubierreka, 52 Apartado 49, 20210 Lazkao, Gipuzcoa, Tel: +34 943 805 333 Fax: +34 943 889 137 email: [email protected] web: stp.es Certificate No: MD00/4411/0002/3 Expiry Date: 15/02/2020

Sweden

AB SANDVIK MATERIALS TECHNOLOGY Forgings austenitic stainless5.00 Gothenburg duplex stainless* 5.00 SE-811 81 Sandviken Tel: +46 (0) 26 263311 email: [email protected] web: www.smt.sandvik.com

Certificate No. MD00/2173/0008/3 Expiry date: 28/10/2021

Approval include semi-finished products of forged round bars with maximum diameter 450mm, 3600mm long Approval include semi-finished products of forged square blooms up to 350mm wide, 4300mm long * for approved applications. BHARAT FORGE KILSTA AB Forgings carbon1.00 Gothenburg carbon-manganese 1.00 alloy 1.00 Box 428 S 69127 Karlskoga Tel: +46 586 247239 Fax: +46 586 63270

Email: [email protected]

Web:http://www.bharatforge.com Including crankshafts with K factor > 1.0 for approved applications

Certificate Number: MD00/0750/0008/3 Expiry: 05/02/2021

NORDIC FLANGES AB Forgings austenitic stainless0.10 Stockholm Kavelvägen 17 SE - 894 35 Själevad Tel: +46 70 383 6060 email [email protected] web: www.nordicflanges.com Certificate Number: MD00/2983/0007/3 Expiry: 29/05/2021

OVAKO SWEDEN AB Forgings carbon3.70 Gothenburg carbon-manganese 3.70 alloy 3.70 Business Unit Tube & Ring 813 83 Hofors Tel: +46 290 251 95 Fax: +46 290 259 39 email: mailto:charlotta [email protected] web: http://www.ovako.com Certificate Number: MD00/3710/0004/3 Expiry: 25/11/2020

SCANA STEEL BJÖRNEBORG AB Forgings carbon60.00 Gothenburg carbon-manganese 60.00 alloy 60.00 Kristinehamnsvägen 2 S-68071 Björneborg Tel: +46 550 251 30 Fax: +46 550 269 5884 email: [email protected] web: www.scana.no

Certificate Number: MD00/2769/0005/3 Expiry: 02/08/2018

Page 62 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office SODERFORS STEEL AB Forgings carbon6.00 Gothenburg carbon-manganese 6.00 alloy 6.00 Mellanverksvägen, 815 04 Söderfors Tel: +46 293 177 60 Mob: +46 72 208 50 38 email: [email protected] web: www.sosteel.se

Certificate No: Expiry Date:

Switzerland

IMBACH & CIE AG Forgings carbon5.00 Hamburg carbon-manganese 5.00 alloy 5.00 austenitic stainless 5.00 CH-6244 Nebikon Stämpfelfeld 9, Tel: +41 62 748 44 44 Fax: +41 62 748 44 40

E-mail: [email protected] Website: www.imbach.com

Certificate No. MD00/0752/0008/3 Expiry date: 08/08/2020 SCHMIEDEWERK STOOSS AG., Forgings carbon5.00 Stuttgart carbon-manganese 5.00 alloy 5.00 austenitic stainless 5.00 duplex stainless* 5.00 ferritic stainless* 5.00 Maienbrunnenstrasse 8 Postfach 45 CH-8908 HEDINGEN Tel: +41 (0)43 322 6210 Fax: +41 (0)43 322 6201 E-mail: [email protected]

Website: www.stooss.com

* accepted for approved applications

Certificate No. MD00/2046/0008/3 Expiry date: 18/07/2020

Taiwan, Republic of China

BOTH-WELL STEEL FITTINGS Co. Ltd. Forgings carbon0.05 Kaohsiung austenitic stainless 0.05 No. 303, Ren-Sin Road Ren-Wu District Kaohsiung City 81460 Tel: +886 7371 1536 Fax: +886 7371 3864 Email: mailto:[email protected] Web: http://www.bothwell.com.tw Certificate No. MD00/0208/0008/3 Expiry date: 13/02/2021 NAN LUNG STEEL & IRON CORPORATION Forgings carbon16.00 Kaohsiung carbon-manganese 16.00 No. 344, Chang An Road Yen Chao District Kaohsiung City Tel: +886 7 616 2931 Fax: +886 7 616 6789 Email: mailto:[email protected] Certificate Number: MD00/2722/0008/3 Expiry: 12/07/2021 SAN ENG STEEL FORGING CO., LTD. Forgings carbon10.00 Kaohsiung carbon-manganese 10.00 No. 311 Ren-Sin Road Renwu Dist. Tel: +886 7 3724249 Fax: +886 7 3712923

E-mail: [email protected] Website: http://www.saneng.com.tw

Certificate No. MD00/1299/0008/3 Expiry date: 08/02/2021

Page 63 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office The Netherlands

GROFSMEDERIJ NIEUWKOOP B.V. Forgings alloy1.25 Amsterdam Transportweg 47, 2421 LT Nieuwkoop, Zuid Holland, Tel: +31 (0)172 579303 Fax: +31 (0)172 571073 email: [email protected] web: www.gnweb.com

Certificate No:MD00/4618/0002/3 Expiry Date: 04/10/2019

Turkey

AKMETAL METALURJI ENDUSTRISI A.S. Forgings carbon5.60 Istanbul carbon-manganese 5.60 alloy 5.60 Eski Ankara Asfalti cad. Tepeören Mah, No. 236 34959 Tuzla Istanbul Tel +90 216 593 03 08 Fax: +90 216 593 03 82 email: [email protected] web: www.akmetal.com Certificate No. MD00/2811/0004/3 Expiry date: 12/07/2020

KANCA EL ALETLERI DÖVME ÇELIK VE MAKINE SANAYII A.S. Forgings carbon-manganese0.19 Istanbul alloy 0.19 TOSB ( Taysad Org. San Bölg.) 1.Cadde 41480 Sekerpinar Çayirova Çayirova - Kocaeli Tel No: +90 216 678 86 00 Fax No: +90 216 678 86 01

Email: [email protected] & [email protected]

Web: www.kanca.com. Certificate No: MD00/4100/0003/3 Expiry date 25/11/2021

Ukraine

"FERRIT" Additional Liability Company" Forgings carbon12.00 Mykolaiv carbon-manganese 12.00 3, Sukhoi Ostrov St. Post code 49101 Dnepropetrovsk Tel: +380 56 775 1974 Fax: +380 56 741 7339 email: [email protected] web: www.ferrit.dp.ua Certificate No. MD00/2819/0007/3 Expiry date: 01/09/2019 PJSC "ENERGOMASHSPETSSTAL" Forgings carbon95.00 Mykolaiv carbon-manganese 95.00 alloy 95.00 84306 Kramatorsk Donetsk Region Tel: +38 (06264) 6-94-93 Fax: +38 (06264) 6-94-93 Email: [email protected] Certificate No. MD00/3575/0005/3 Expiry date: 14/03/2021 PJSC ''Novokramatorsky Mashinostroitelny Zavod'' Forgings carbon60.00 Mykolaiv carbon-manganese 60.00 alloy 60.00 5, Ordzhonikidze Str., Kramatorsk, Donetsk region, 84305 Tel: +38 (06264) 7 88 01 Fax: +38(06264) 7-22-49 Email: [email protected] Web:www.nkmz.com Certificate No.: MD00/4794/0001/1 Expiry Date: 10/07/2018 SUBSIDIARY ENTERPRISE Forgings carbon9.00 Mykolaiv carbon-manganese 9.00 "DRILL COLLARS AND KELLYS PLANT" 2, Komarova str., Sumy City 40020 Tel: +38 0542 773 201 Email to: [email protected]

Includes steelmaking Certificate No.: MD00/4256/0001/3 Expiry Date: 17/11/2016

Page 64 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office

United Kingdom

BARRETT STEEL ENERGY PRODUCTS - FORGE DIVISION Forgings carbon0.58 Newcastle upon Tyne carbon-manganese 0.58 alloy 0.58 austenitic stainless 0.58 Wincomblee Road Low Walker Newcastle Upon Tyne NE6 3QQ Tel: +44 (0)191 263 8686 Fax: +44 (0)191 262 6428 Email: mailto: [email protected] Web:http://www.bsep.com Including special stainless steel for approved applications. Certificate No. MD00/0946/0009/3 Expiry date: 29/03/2018

BIFRANGI UK LIMITED Forgings carbon0.35 Birmingham carbon-manganese 0.35 alloy 0.35 austenitic stainless 0.35 P.O. Box 22 Tower Works Lincoln LN2 5DT Tel: +44 (0)1522 585814 Fax: +44 (0)1522 529116

E-mail: [email protected] Website: www.bifrangi.co.uk

Certificate No. MD00/1597/0008/3 Expiry date: 02/07/2020

Including crankshafts with K1 factor = 1.05 for approved applications

FIRTH RIXSON FORGINGS LIMITED Forgings carbon2.00 Energy Coventry, UK carbon-manganese 2.00 alloy 2.00 austenitic stainless 2.00 duplex stainless* 2.00 Meadowhall and River Don Sites Meadowhall Road Wincobank Sheffield S9 1HD * accepted for approved applications Tel: +44 114 219 3144

E-Mail: [email protected]

Web http://www.firthrixson.com

Certificate #: MD00/0595/0010/3 Expiry date: 30/07/2021 FIRTH RIXSON FORGINGS LIMITED Forgings carbon2.00 Birmingham carbon-manganese 2.00 alloy 2.00 austenitic stainless 2.00 Darley Dale Matlock Derbyshire DE4 2JB Tel: +44 114 219 3626

E-mail: [email protected]

Website: www.arconic.com

Titanium and Nickel based alloys may be accepted for approved applications.

Certificate No. MD00/4502/0002/3 Expiry date: 09/03/2020

INDEPENDENT FORGINGS & ALLOYS LIMITED Forgings carbon8.00 Birmingham carbon-manganese 8.00 alloy 8.00 austenitic stainless 8.00

Page 65 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office Victoria Forge Livesey Street Sheffield S6 2BL Tel: +44 114 229 2853 Fax: +44 114 234 0261 web: www.independentforgings.com

Certificate No. MD00/0738/0009/3 Expiry date: 24/01/2020

SDF AUTOMOTIVE Forgings carbon0.01 Liverpool PO BOX 19 Stourport Road, Kidderminster. DY11 7QB

Approval covers manufacture of carbon steel spilt fracture connecting rod forgings. Approved applications only. Tel: +44 (0) 1562 823451 Fax: +44 (0) 1562 754336

Website: www.sdf-auto.co.uk

Certificate No. MD00/4612/0001/3 Expiry Date: 17/09/2016 SHEFFIELD FORGEMASTERS INTERNATIONAL LTD. Forgings carbon285.00 Birmingham carbon-manganese 285.00 alloy 285.00 austenitic stainless 50.00 P.O. Box 286 Brightside Lane Sheffield S9 2RW Tel: +44 (0)114 244 9071 Fax: +44 (0)114 251 9021

Email: [email protected]

Website: www.sheffieldforgemasters.com

Certificate No. MD00/0524/0009/3 Expiry date: 29/06/2020

SOMERS FORGE Ltd. Forgings carbon50.00 Liverpool carbon-manganese 50.00 alloy 50.00 austenitic stainless 50.00 Haywood Forge Prospect Road Halesowen West Midlands B62 8DZ Tel: +44 (0)121 585 5959 Email: mailto:[email protected] Web: http://www.somersforge.com Certificate No. MD00/1399/0008/3 Expiry date: 07/07/2020

United States of America

CANTON DROP FORGE Forgings alloy0.20 Chicago 4575 Southway St, S.W., Canton, Ohio 44706 Tel: +1 330 477 4511 Fax: +1 330 477 2046 email: [email protected] web: www.cantondropforge.com Approval is for closed die forged gear blanks supplied in normalised condition intended for further heat treatment.

Certificate No: MD00/4664/0001/3 Expiry Date: 21/02/2020 ELLWOOD CITY FORGE Forgings carbon20.00 Chicago carbon-manganese 20.00 alloy 20.00 800 Commercial Ave PO Box 31 Ellwood City PA16117 Tel: +1 - 800 843 0166 Ext 3169 E-mail: [email protected]

Website: www.ellwoodcityforge.com

Materials Quality Scheme Approved - Approval No. MQS 050

Certificate No. MD00/3568/0005/3 Expiry date: 29/05/2022

Page 66 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office ELLWOOD CRANKSHAFT GROUP SHARON FORGE Forgings alloy50.00 Chicago 1161 Sharpsville Avenue, Sharon PA 16146 Tel: +1 724 347 0250 Fax: + 1 724 347 0254

E-mail:

Certificate No: MD00/4795/0001/3 Expiry Date: 29/07/2021 ELLWOOD NATIONAL CRANKSHAFT Forgings carbon7.00 Chicago carbon-manganese 7.00 alloy 7.00 One Front Street Irvine, PA 16329 Tel: +1 814 563 8946

E-mail; [email protected]

Website: www.ellwoodgroup.com

Approval also includes Ellwood Crankshaft and Machine Co. 2727 Freedland Road, Hermitage, PA. USA Materials Quality Scheme Approved - Approval No. MQS 043 Certificate No. MD00/1067/0012/3 Expiry date: 05/06/2020 FIBA TECHNOLOGIES INC. Forgings alloy3.30 Chicago 1535 Grafton Road, Millbury, MA 01527, Tel: +1 508 887 7100 Fax: +1 508 754 2254 email: [email protected] web: www.fiba.com

Certificate No.: MD00/4295/0002/3 Expiry Date: 02/03/2017

Approved for quench and tempered seamless pressure vessels manufactured by pipe spinning process to the requirements of AD2000.

Approval includes pipe spinning process carried out at FIBA Technologies Inc. 53 Ayer Road, Littleton MA. 01460. USA.

Maximum approved dimensions = 610mm o/d x 21mm w/t. SCOT FORGE Forgings carbon20.00 Chicago carbon-manganese 20.00 alloy 20.00 Spring Grove Works 8001 Winn Road Spring Grove Illinois 60081 Tel: +1 815 675 4281 Fax: +1 847 587 2000 Contact: Steve Hughes Email: [email protected] Web: http://www.scotforge.com Certificate #: MD00/1330/0008/3 Expiry date: 06/05/2020 SCOT FORGE Forgings carbon17.00 Chicago carbon-manganese 17.00 alloy 17.00 Clinton Works 105 Scot Drive Clinton Wisconsin 53525 Tel: +1 815 675 4281 Fax: +1 847 587 2000 Contact: Steve Hughes Email: [email protected] Web: http://www.scotforge.com Certificate No. MD00/1331/0008/3 Expiry date: 06/05/2020 SCOT FORGE Forgings carbon1.50 Chicago carbon-manganese 1.50 alloy 1.50 Franklin Park Works 9394 West Belmont Ave. Franklin Park Ilinois 60131 Tel: +1-800-435-6621 Fax: +1 847-587-2000 Email: mailto: [email protected] Web: http://www.scotforge.com Certificate #: MD00/1961/0008/3 Expiry date: 22/05/2019

Page 67 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

List 3 Approved Manufacturers of Steel Forgings

Name and Address Category Grade Max Weight Tonnes Office THYSSENKRUPP CRANKSHAFT COMPANY Forgings carbon0.29 Chicago carbon-manganese 0.29 Danville Forging Division 1000 Lynch Spur Road P.O. Box 214 Danville Illinois 61832 Tel: +1 217444 5326 email: [email protected] Web: www.thyssenkrupp.com Certificate No. MD00/0902/0009/3 Expiry date: 12/06/2020

Vietnam

FELIX METAL TECH CO., LTD Forgings carbon0.10 Hai Phong carbon-manganese 0.10 austenitic stainless 0.10 Bac Hamlet, Luu Kiem Commune, Thuy Nguyen Dist, Hai Phong Tel: +84 225 3692 194 Fax: +84 225 3692 193 Mob: +84904265922 email: [email protected] web: www.fete.co.kr Certificate No: MD00/4539/0002/3 Expiry date: 02/01/2022

Page 68 As at 16 July 2019 This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as ‘Lloyd's Register’. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.

© Lloyd’s Register Group Limited 2019. All rights reserved.

This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, © Lloyd’s Register Group Limited 2019. All rightswhich is reserved.retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.