Permanent Slides of Plant Cuticle Stained with Sudan IV and Sudan Black B
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Gst Gram Staining Learning Objectives the Student Will Use Aseptic Techniques in the Safe Inoculation of Various Forms of Media
GSt Gram Staining Learning Objectives The student will Use aseptic techniques in the safe inoculation of various forms of media. Follow oral and written instructions and manage time in the lab efficiently. Use the bright field light microscope to view microbes under oil immersion, make accurate observations and appropriate interpretations and store the microscope according to lab procedures. Properly prepare a bacterial smear for accurate staining and describe the chemical basis for simple staining and negative staining. Background/Theory Differential staining distinguishes organisms based on their interactions with multiple stains. In other words, two organisms may appear to be different colors. Differential staining techniques commonly used in clinical settings include Gram staining, acid-fast staining, endospore staining, flagella staining, and capsule staining. This link to the OpenStax Microbiology text provides more detail on these differential staining techniques. (OpenStax CNX, 2018) The Gram stain is a differential staining procedure that involves multiple steps. It was developed by Danish microbiologist Hans Christian Gram in 1884 as an effective method to distinguish between bacteria containing the two most common types of cell walls. (OpenStax CNX, 2018) One type consists of an inner plasma membrane and a thick outer layer of peptidoglycan. The other type consists of a double phospholipid Figure 1 Simplified structures of Gram negative cells (left) and Gram positive bilayer with a thin layer of cells (right) peptidoglycan between the two. The Gram Staining technique remains one of the most frequently used staining techniques. The steps of the Gram stain procedure are listed below and illustrated in Figure. (OpenStax CNX, 2018) 1. -
The Suitability of Certain Stains 3R Studying Lignification in Balsam Fir, Ibies Balsamea (L.) Mill
The suitability of certain stains 3r studying lignification in balsam fir, ibies balsamea (L.) Mill Kutscha and Gray Technical bulletin 53 March 1972 Life Sciences and Agriculture Experiment Station Cover photo: Safranin and aniline blue, showing blue unlignified cambium (top of photo) and contrasting red lignified tissue (lower part of photo). Imma ture, secondary walls appear blue-blue green and can be seen approximately five to eight cells down from the cambial region. Section of FAA-killed and celloidm embedded compression wood sample collected July 6, 1966; X 320. ABSTRACT An investigation was conducted to examine the suitability of ten staining reactions for studying lignification in balsam fir, Abies balsamea (L.) Mill. Two experiments were carried out on material collected on two different dates. In each experiment slides of fresh, FAA-killed and FAA-killed celloldin-embedded material of normal and compression wood were stained and evaluated. No significant difference in staining reactions was found between material collected on different dates. In each experiment, the embedded material showed somewhat superior results compared with the fresh and FAA-killed material with at least half of the stains. No marked difference was observed between normal and compression wood. This study emphasized the need for considsring each of the ten staining reactions on an individual basis, since each has particular ad vantages and disadvantages as emphasized throughout the study. Stain ing schedules were prepared and tables compiled to determine -
Lysochrome Dyes Sudan Dyes, Oil Red Fat Soluble Dyes Used for Biochemical Staining of Triglycerides, Fatty Acids, and Lipoproteins Product Description
FT-N13862 Lysochrome dyes Sudan dyes, Oil red Fat soluble dyes used for biochemical staining of triglycerides, fatty acids, and lipoproteins Product Description Name : Sudan IV Other names: Sudan R, C.I. Solvent Red 24, C.I. 26105, Lipid Crimson, Oil Red, Oil Red BB, Fat Red B, Oil Red IV, Scarlet Red, Scarlet Red N.F, Scarlet Red Scharlach, Scarlet R Catalog Number : N13862, 100g Structure : CAS: [85-83-6] Molecular Weight : MW: 380.45 λabs = 513-529 nm (red); Sol(EtOH): 0.09%abs =513-529nm(red);Sol(EtOH):0.09% S:22/23/24/25 Name : Sudan III Other names: Rouge Sudan ; rouge Ceresin ; CI 26100; CI Solvent Red 23 Catalog Number : 08002A, 25g Structure : CAS:[85-86-9] Molecular Weight : MW: 352.40 λabs = 513-529 nm (red); Sol(EtOH): 0.09%abs =503-510nm(red);Sol(EtOH):0.15% S:24/25 Name : Sudan Black B Other names: Sudan Black; Fat Black HB; Solvent Black 3; C.I. 26150 Catalog Number : 279042, 50g AR7910, 100tests stain for lipids granules Structure : CAS: [4197-25-5] S:22/23/24/25 Molecular Weight : MW: 456.54 λabs = 513-529 nm (red); Sol(EtOH): 0.09%abs=596-605nm(blue-black) Name : Oil Red O Other names: Solvent Red 27, Sudan Red 5B, C.I. 26125 Catalog Number : N13002, 100g Structure : CAS: [1320-06-5 ] Molecular Weight : MW: 408.51 λabs = 513-529 nm (red); Sol(EtOH): 0.09%abs =518(359)nm(red);Sol(EtOH): moderate; Sol(water): Insoluble S:22/23/24/25 Storage: Room temperature (Z) P.1 FT-N13862 Technical information & Directions for use A lysochrome is a fat soluble dye that have high affinity to fats, therefore are used for biochemical staining of triglycerides, fatty acids, and lipoproteins. -
Revisions Inserts Rev from Rev to JOB
BALTSO0191 Version 11.0 Template 4 Revisions Inserts Rev from Rev to JOB # 06 07 52-17 Notes: 1. BD Catalog Number: 212525, 212526, 212527, 212528, 212531, 212532, 212539, 212542, 212543, 212544, 212545 2. Blank (Sheet) Size: Length: 25.5” Width: 22” 3. Number of Pages: 28 Number of Sheets: 1 4. Page Size: Length: 8.5” Width: 5.5” Final Folded Size: 4.25” x 5.5” 5. Ink Colors: No. of Colors: 2 PMS#: 032 Red; Standard Black 6. Printed two sides: Yes X No 7. Style (see illustrations below): # 5 W W W W W W W 8. Vendor Printed X Online/In House Printed Web 9. See specication control no. N/A for material information. 10. Graphics are approved by Becton, Dickinson and Company. Supplier has the responsibility for using the most current approved revision level. Label Design COMPANY CONFIDENTIAL. THIS DOCUMENT IS THE PROPERTY OF BECTON, DICKINSON AND Becton, Dickinson and Company Proofer COMPANY AND IS NOT TO BE USED OUTSIDE THE COMPANY WITHOUT WRITTEN PERMISSION. 7 Loveton Circle Sparks, MD 21152 USA Checked By Category and Description Sheet: 1 of 29 Part Number: Package Insert, 8820191JAA Gram Stain Kits and Reagents Scale: N/A A B Gram Stain Kits and Reagents English: pages 1 – 5 Italiano: pagine 14 – 18 8820191JAA(07) Français : pages 5 – 9 Español: páginas 19 – 23 2017-09 Deutsch: Seiten 10 – 14 Contact your local BD representative for instructions. / Свържете се с местния представител на BD за инструкзии. / Pokyny vám poskytne místní zástupce společnosti BD. / Kontakt den lokale BD repræsentant for at få instruktioner. -
Student Safety Sheets Dyes, Stains & Indicators
Student safety sheets 70 Dyes, stains & indicators Substance Hazard Comment Solid dyes, stains & indicators including: DANGER: May include one or more of the following Acridine orange, Congo Red (Direct dye 28), Crystal violet statements: fatal/toxic if swallowed/in contact (methyl violet, Gentian Violet, Gram’s stain), Ethidium TOXIC HEALTH with skin/ if inhaled; causes severe skin burns & bromide, Malachite green (solvent green 1), Methyl eye damage/ serious eye damage; may cause orange, Nigrosin, Phenolphthalein, Rosaniline, Safranin allergy or asthma symptoms or breathing CORR. IRRIT. difficulties if inhaled; may cause genetic defects/ cancer/damage fertility or the unborn child; causes damages to organs/through prolonged or ENVIRONMENT repeated exposure. Solid dyes, stains & indicators including Alizarin (1,2- WARNING: May include one or more of the dihydroxyanthraquinone), Alizarin Red S, Aluminon (tri- following statements: harmful if swallowed/in ammonium aurine tricarboxylate), Aniline Blue (cotton / contact with skin/if inhaled; causes skin/serious spirit blue), Brilliant yellow, Cresol Red, DCPIP (2,6-dichl- eye irritation; may cause allergic skin reaction; orophenolindophenol, phenolindo-2,6-dichlorophenol, HEALTH suspected of causing genetic PIDCP), Direct Red 23, Disperse Yellow 7, Dithizone (di- defects/cancer/damaging fertility or the unborn phenylthiocarbazone), Eosin (Eosin Y), Eriochrome Black T child; may cause damage to organs/respiratory (Solochrome black), Fluorescein (& disodium salt), Haem- HARMFUL irritation/drowsiness or dizziness/damage to atoxylin, HHSNNA (Patton & Reeder’s indicator), Indigo, organs through prolonged or repeated exposure. Magenta (basic Fuchsin), May-Grunwald stain, Methyl- ene blue, Methyl green, Orcein, Phenol Red, Procion ENVIRON. dyes, Pyronin, Resazurin, Sudan I/II/IV dyes, Sudan black (Solvent Black 3), Thymol blue, Xylene cyanol FF Solid dyes, stains & indicators including Some dyes may contain hazardous impurities and Acid blue 40, Blue dextran, Bromocresol green, many have not been well researched. -
Factors Affecting the Adsorption of Some Ionic Dyes on the Surface of Modify Cao from Eggshell
Asian Journal of Applied Sciences (ISSN: 2321 – 0893) Volume 07 – Issue 01, February 2019 Factors Affecting the Adsorption of Some Ionic Dyes on the Surface of Modify CaO from Eggshell Ibtighaa K. Radhi, Mouayed A. Hussein, Zaki N. Kadhim* Department of Chemistry, College of Science, University of Basrah Basrah, Iraq *Corresponding author’s emails: zekinasser99 [AT] yahoo.com ________________________________________________________________________________________________ ABSTRACT--- In this paper, calcium oxide (CaO) was produced by the thermal treatment of eggshell. The doping process with silver iodide (AgI), oxygen (O), sulfur(S) and nitrogen (N) was achieved by adsorbents. The adsorption of Acid fuchsine (AF), Indigo Carmine (IC), Nigrosine (NG) and Alizarine Red S (AR) on the surface of these particles was studied. The different conditions affecting the adsorption process, such as the time of equilibrium, the primary concentration of the studied dyes, the amount of the adsorbent, the acidic function, the speed of the pruning motion and the temperature were studied. The pH stability time (5-10 minutes), IC and NG (30 minutes) and AR were (90 minutes). The effect of temperature was also studied within the range (25-45 ° C). The results showed that the adsorption capacity increased by increasing the temperature, ie the reaction is endothermic. The study showed the effect of the acidic function on the percentage of pigmentation. The percentage was increased by increasing the acidic function in the basal circles on the surfaces except for the AR dye. It decreased the percentage by increasing the acidic function. The effect of the weight of the adsorbent was studied on the percentage of adsorption. -
GRAM STAIN REAGENTS - for in Vitro Use Only - Catalogue No
GRAM STAIN REAGENTS - For in vitro use only - Catalogue No. SG51-55 Our Gram-Stain Reagents are intended to be The last step is the application of a counterstain. The used as a differential stain for the microscopic most common counterstain is safranin, which colors examination of bacterial cultures and laboratory decolorized cells pink. An alternate counterstain is basic specimens. fuchsin, which gives the decolorized cells more of a Gram staining is the single most useful test in bright pink or fuchsia coloration. The basic fuchsin the microbiology laboratory given its simplicity and counterstain works particularly well for anaerobic ability to differentiate bacteria into two main bacteria, but poorly for Legionella and Bordetella groups: gram-positive organisms and gram negative species. organisms. Hans Christian Joachim Gram first devised the original procedure in the late 19 th century, and although modifications have since been Formulation per Litre made, the basic principles and results remain the same. Our formulation is often referred to as the SG51 Gram Crystal Violet Hucker Modification. The staining spectrum includes almost all Crystal Violet ................................................ 20.0 g bacteria, many fungi, and parasites such as Ammonium Oxalate ....................................... 8.0 g Trichomonas , Strongyloides , and protozoan cysts. Methanol ................................................. 200.0 mL The notable exceptions include intracellular pathogens such as Chlamydia and Rickettsia , and SG52 Gram Iodine those organisms lacking a true cell wall such as Mycobacterium , Mycoplasma , and Ureaplasma . Iodine Crystals .............................................. 3.33 g The differential properties of the staining Potassium Iodide ........................................... 6.67 g process are attributed to the differences in composition between gram-positive and gram- SG53 Gram Decolorizer negative cell walls. -
How to Construct and Use a Simple Device to Prevent the Formation of Precipitates When Using Sudan Black B for Histology
Acta Botanica Brasilica 29(4): 489-498. 2015. doi: 10.1590/0102-33062015abb0093 How to construct and use a simple device to prevent the formation of precipitates when using Sudan Black B for histology João Marcelo Santos de Oliveira1 Received: April 17, 2015. Accepted: July 1, 2015 ABSTRACT The present work aims to demonstrate the stages of fabrication and use of a simple device to avoid the formation or fixa- tion of precipitates from Sudan Black B solution on tissues. The device consists of four coverslip fragments attached to a histology slide, which serve as points of support for the histological slide under analysis. To work properly, the histology slide with the sections should be placed with the sections facing downwards the device. A small space between the device and the histology slide is thereby created by the height of the coverslip fragments. When Sudan Black B is applied, the solution is maintained within the edges of the device and evaporation is minimized by the small space, thereby reducing the consequent formation of precipitates. Furthermore, by placing the sections facing downward the device, any sporadically formed precipitates are prevented from settling on and fixing to the sectioned tissues or organs. By avoiding the formation of precipitates, plant cells, tissues and organs can be better observed, diagnosed and photomicrographically recorded. Keywords: histochemical tests, histology, lipids, plant anatomy, Sudan Black B Introduction for organic solvents, printer ink, varnishes, resins, oils, fats, waxes, cosmetics and contact lenses. Sudan reagents, including the traditional Sudan III, IV Lansink (1968) isolated two pure fractions of Sudan and Sudan Black B (SBB), are widely utilized to determine Black B, in addition to impurities, and denominated them lipids (Horobin 2002) in animals, plants and hydrophobic SBB-I and SBB-II. -
Commercial Fisheries Review
May 1957 - Supplement COMMERCIAL FISHERIES REVIEW DYE-BINDING CHARACTERISTICS OF FISH-MEAL PROTEIN Part 1 - Some Preliminary Findings as to Suitable Dyes By Claude Thurston A: ABSTRACT THERE ARE REPORTS IN THE SCIENTIFIC LITERATURE THAT THE QUALITY OF A VEGETABLE PROTEIN CAN BE DETERMINED BY ITS DYE-BINDING CHARACTERIS- TICS. IN AN INVESTIGATION TO FIND IF A SIMILAR RELATIONSHIP EXISTS BE- TWEEN DYES AND THE PROTEIN IN FISH MEAL, MORE THAN 100 DYES WERE SCREENED AS TO THEIR SUITABILITY. EIGHT DYES WERE FOUND TO HAVE GOOD BINDING PROPERTIES. SIX OF THEM--AC1D FUCHSIN, ANILINE BLUE, BROMO- CRESOL GREEN, ALIZARIN RED S, ORANGE II, AND ORANGE G--WERE ACID DYES; AND TWO OF THEM--CONGO RED AND T ETRABROMOPHENOLBLUE--WERE BASIC DYES. IN THE USE OF THESE, FISH MEALS EXHIBITED A WIDE VARIATION IN THE EX- TENT OF DYE BINDING. SUFFICIENT DATA, HOWEVER, ARE NOT AVAILABLE AS YET TO DETERMINE THE RELATIONSHIP OF THE DYE-BINDING CHARACTERISTICS TO THE NUTRITIVE VALUE OF FISH-MEAL PROTEIN. INTRODUCTION Several of the investigations reported in the scientific literature indicate that the quality of a vegetable protein can be determined by its dye-binding characteris- tic. Loeb (1922), studyingthe process of digestion, stated that pepsin is an anion and that it combines with cations. Chap- man, Greenberg, and Schmidt (1927) show- ed, by reactions of several acid dyes with various protein solutions, that the amount of dye that was bound was proportional to thenumber of basic groups in the protein. Rawlins and Schmidt (1929) extended the investigation to include basic dyes and obtained similar results; they later (1930) used acid dyes with gelatin granules and gelatin solutions and verified their pre- vious conclusions. -
Sorptive Elimination of Alizarin Red-S Dye from Water Using Citrullus Lanatus Peels in Environmentally Benign Way Along with Equilibrium Data Modeling
Asian Journal of Chemistry; Vol. 25, No. 10 (2013), 5351-5356 http://dx.doi.org/10.14233/ajchem.2013.14179 Sorptive Elimination of Alizarin Red-S Dye from Water Using Citrullus lanatus Peels in Environmentally Benign Way Along with Equilibrium Data Modeling * RABIA REHMAN and TARIQ MAHMUD Institute of Chemistry, University of the Punjab, Lahore-54590, Pakistan *Corresponding author: Fax: +92 42 99230998; Tel: +92 42 99230463; Ext: 870; E-mail: [email protected] (Received: 7 June 2012; Accepted: 3 April 2013) AJC-13203 Textile industry effluents comprised of various toxic and non biodegradable chemicals, especially non-adsorbed dyeing materials, having synthetic origin. Alizarin Red-S dye is one such examples. In this work, sorptive removal of Alizarin Red-S from water was investigated using Citrullus lanatus peels, in batch mode on laboratory scale. It was observed that adsorption of dye on Citrullus lanatus peels increases with increasing contact time and temperature, but decreases with increasing pH. Isothermal modeling indicated that physio- sorption occurred more as compared to chemi-sorption during adsorption of Alizarin Red-S by Citrullus lanatus peels, with qm 79.60 mg g-1. Thermodynamic and kinetic investigations revealed that this process was favourable and endothermic in nature, following pseudo- second order kinetics. Key Words: Citrullus lanatus peels, Alizarin Red-S, Adsorption, Isothermal modeling, Kinetics. INTRODUCTION Textile industries use a variety of dyeing materials for developing different colour shades. A massive amount of these dyes is wasted during processing which goes into effluents and poses problems for mankind and environmental abiotic and biotic factors by creating water pollution. -
S41598-020-72996-3.Pdf
www.nature.com/scientificreports OPEN Mechanistic understanding of the adsorption and thermodynamic aspects of cationic methylene blue dye onto cellulosic olive stones biomass from wastewater Mohammad A. Al‑Ghouti* & Rana S. Al‑Absi In the current study, the mechanistic understanding of the adsorption isotherm and thermodynamic aspects of cationic methylene blue (MB) dye adsorption onto cellulosic olive stones biomass from wastewater were investigated. The batch adsorption of MB onto the olive stones (black and green olive stones) was tested at a variety of pH, dye concentrations, temperatures, and biomass particle sizes. The adsorption thermodynamics such as Gibbs free energy, enthalpy, and entropy changes were also calculated. Moreover, the desorption studies of MB from the spent olive stones were studied to explore the re‑usability of the biomasses. The results revealed that under the optimum pH of 10, the maximum MB uptake was achieved i.e. 80.2% for the green olive stones and 70.9% for the black olive stones. The green olive stones were found to be more efcient in remediating higher MB concentrations from water than the black olive stones. The highest MB removal of the green olive stones was achieved at 600 ppm of MB, while the highest MB removal of the black olive stones was observed at 50 ppm of MB. Furthermore, for almost all the concentrations studied (50–1000 ppm), the MB adsorption was the highest at the temperature of 45 °C (P value < 0.05). It was shown by the Fourier transform infrared that the electrostatic interaction and hydrogen bonding were proposed as dominant adsorption mechanisms at basic and acidic pH, respectively. -
DIFFERENTIAL STAINING, Part I
DIFFERENTIAL STAINING, Part I Differential staining is a procedure that takes advantage of differences in the physical and chemical properties of different groups of bacteria. It allows us to differentiate between different kinds of bacterial cells or different parts of a bacterial cell. I. GRAM STAIN The most commonly used differential stain is the Gram stain, first described in 1884 by Christian Gram, a Danish physician. The Gram reaction divides bacteria into two groups, those which are Gram-positive and those which are Gram-negative. Those organisms which retain the primary stain (crystal violet) are stained purple and are designated Gram-positive; those which lose the crystal violet and are subsequently stained by a safranin counterstain appear red and are designated Gram-negative. The conventional Gram-stain technique is described in the Procedure part of this handout; however, it is important to recognize early on that two aspects of the procedure are crucial: 1. The crystal violet treatment must precede iodine treatment. Iodine acts as a mordant, i.e., it increases the affinity of the cells for the crystal violet. Iodine alone has no bacterial staining capabilities. 2. Decolorization must be short and precise. Too long an exposure to 95% alcohol will decolorize Gram-positive as well as Gram-negative cells. The Gram stain has been used as a taxonomic tool for many years, aiding in the classification and identification of bacterial cells. However, it is also useful in a broader sense, as there appears to be a close correlation between the Gram reaction and many other morphological and physiological characteristics of bacterial cells.