DOCSLIB.ORG

Hand Tools and Tool Storage

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Hand Tools and Tool Storage TOOLS Hand Tools and Tool Storage Hand Crimpers 2 Cutters 9 Strippers 14 Cable Tensioners 23 Pliers 24 Screwdrivers 28 Bits and Holders 49 Spanners 56 Wrenches 60 Sockets and Drivers 62 Tool Kits 64 Knives and Blades 66 Hammers 69 Chisels 69 Allen Keys and Hex Keys 70 Gun Tools 72 Soldering Irons and Accessories 74 Measuring Devices 76 Levelling Tools 78 Marking Tools 78 Tie Down Straps 80 Saws and Saw Blades 80 Hole Saws and Arbors 82 Drill Bits 85 Excavation Tools 93 Clamping Devices 93 Side Cutters 94 Storage Solutions 95 1 TOOLS HAND CRIMPERS LUG AND TERMINAL CRIMPERS COMBINATION NON-RATCHET CRIMPER 1.5-6MM2 Unit: EA Qty: 1 Part No. K10/3 • Low cost combination crimp tool for pre-insulated red, blue and yellow terminals, copper lugs and un-insulated terminals • Includes cutter, bolt cutter and wire stripper • Size: 1.5-6mm2 • For the handyman NOT for quality electrical installations PRE-INSULATED TERMINAL CRIMPER RD/BL/YL Unit: EA Qty: 1 Part No. KTC1 • Low cost ratchet terminal crimper for red, blue and yellow pre-insulated terminals • Ratchet operation ensures correct crimp and reduced hand effort • Max capacity is 6mm2 when crimping flexible yellow conductors PROF. PRE-INSULATED TERMINAL CRIMPER Unit: EA Qty: 1 Part No. KTC3 • High precision ratchet style crimping tool for red, blue and yellow pre-insulated terminals • Jaws are hardened and polished to ensure optimum crimp • Super high leverage ergonomic handles • Ratchet operation ensures correct crimp PRE-INS.TERMINAL CRIMPER RD/BL/YL PREC Unit: EA Qty: 1 Part No. HP3 • A high precision ratchet terminal crimper for red, blue and yellow pre-insulated terminals • Jaws are hardened and polished for optimum crimp • Ratchet operation ensures correct crimp and reduced hand effort • Guaranteed for a million crimps PRE-INS.TERMINAL CRIMPER - PRECISION Unit: EA Qty: 1 Part No. HP3/1 • A high precision ratchet terminal crimper with guard for red, blue and yellow pre- insulated terminals • Jaws are hardened and polished for optimum crimp • Ratchet operation ensures correct crimp and reduced hand effort • Guaranteed for a million crimps 2 TOOLS FLAG TERMINAL CRIMPER Unit: EA Qty: 1 Part No. KFLAG • Specially designed to crimp our range of fully insulated blue and red flag terminals • Tool has a ratchet to ensure a complete crimp • Quick and easy to use • Rest terminal in the indent of the jaw and crimp WATERPROOF CONNECTOR CRIMPING TOOL Unit: EA Qty: 1 Part No. FCOMT1 • Effortless one step operation is accomplished in a single action giving a professional, cost effective solution • Universal design, creates a permanent termination • No adjustments are required • Great for home theatre, CATV, SAT and security installations PRE-INS.TERMINAL CRIMPER - 10-16MM2 Unit: EA Qty: 1 Part No. HNN4 • High precision ratchet terminal crimper for red, yellow and blue pre-insulated terminals • Jaws are hardened and polished for optimum crimp • Ratchet is releasable and adjustable BRASS TERM CRIMPER 0.5-4MM2 ROLL CRIMP Unit: EA Qty: 1 Part No. HF1 • High precision tool used mainly for quick connector types • Roll crimp supports the insulation and crimps the wire • Ergonomic handles • Not suitable for flag terminals BRASS TERM CRIMPER 0.75-6MM2 ROLL CRIMP Unit: EA Qty: 1 Part No. HF2 • A low cost tool used mainly for quick connector types • Roll crimp supports the insulation and crimps the wire • Ergonomic handles • Not suitable for flag terminals 3 TOOLS SOLAR CONNECTOR CRIMPER 2.5/4/6 SQ.MM Unit: EA Qty: 1 Part No. HFSOLAR2 • HFSOLAR2 ratchet crimping tool for roll-over crimp contacts for solar cable connectors 2.5, 4 & 6 sq. mm. • Ratchet ensures correct crimp tension and complete cycle • Ratched lelease lever, long handle with gripping covers. • Adjustment dial for setting crimp tension. • Length: 223mm& 80mm & weight: 520g CU LUG HAND CRIMPER 1.5-10MM2 PRECISION Unit: EA Qty: 1 Part No. HN1 • Precision ratchet lug crimper • Ratchet operation ensures correct crimp • Ergonomic handle ensures reduced hand effort • Suitable for indent crimping of copper lugs 1.5-10mm2 COPPER LUG HAND CRIMPER 1.5-10MM2 Unit: EA Qty: 1 Part No. HN2 • Low cost ratchet lug crimper • Ratchet operation ensures correct crimp and reduced hand effort • Suitable for indent crimping of copper lugs 1.5-10mm2 COMBINATION HAND CRIMPER 1.5-16MM2 Unit: EA Qty: 1 Part No. K26 • Low cost ratchet crimper • High leverage to create a ‘W’ crimp for a larger crimp range • Ratchet operation ensures correct crimp • Suitable for copper lugs and un-insulated terminals 1.5-16mm2 H/DUTY COMBINATION CRIMPER 1.5-16MM2 Unit: EA Qty: 1 Part No. K27 • Robust ratchet crimper • Ratchet operation ensures correct crimp • More crimp tools in different sizes available • Suitable for copper lugs and un-insulated terminals 1.5-16mm2 4 TOOLS COPPER LUG CRIMPER 6-25MM2 Unit: EA Qty: 1 Part No. K28 • Robust ratchet crimper for a large range of copper lugs 6-25mm2 • High leverage to create a ‘W’ crimp for a larger crimp range • Low effort required due to high leverage handles • Ratchet operation ensures correct crimp INDENT CRIMPER 16-120MM2 Unit: EA Qty: 1 Part No. K9 • For indent crimping copper lugs from 16-120mm2 • Adjustable dies • Length: 650mm • Weight: 3.6kg TERMINAL CRIMPER KIT WITH 5 DIES Unit: EA Qty: 1 Part No. K03C-5D • Hand, ratchet crimp tool with five dies for bootlace ferrules, uninsulated, pre-insulated and roll crimp terminals • Pre-insulated terminals: red, blue and yellow • Uninsulated terminals: 1.5 to 16mm2 • Roll crimp terminals: 0.5 to 6mm2 • Bootlace ferrules: 0.5 to 16mm2 BOOT LACE CRIMPERS SMALL BOOTLACE CRIMPER 0.14-2.5MM2 Unit: EA Qty: 1 Part No. HNKE3 • Designed to crimp ultra small bootlace ferrules • 7 jaw positions for bootlace pins • Serrated crimp surface creating an enhanced grip • Ratchet controlled with an 8 position pressure adjustment BOOTLACE CRIMPER 0.5-16.0MM2 LOW COST Unit: EA Qty: 1 Part No. HNKE5 • A low cost tool with a huge crimp range for bootlace ferrules • Serrated crimp surface creating an enhanced grip • Ratchet is adjustable to compensate for tool wear • Suitable for bootlace ferrules and un-insulated end sleeves 5 TOOLS BOOTLACE CRIMPER 0.5-2.5MM2 PLIER STYLE Unit: EA Qty: 1 Part No. HNKE6 • A low cost manual plier type crimper • Spring open action • Suitable for bootlace ferrules and un-insulated end sleeves BOOTLACE CRIMPER 16-35MM2 Unit: EA Qty: 1 Part No. HNKE7 • Designed to crimp the large end of the bootlace range • Ratchet controlled for crimp consistency • Serrated crimp surface creating an enhanced grip DIE-LESS BOOTLACE CRIMPER 0.25-6.0MM2 Unit: EA Qty: 1 Part No. HNKE9 • A ferrule crimper with a unique crimp action • Serrated crimp surface creating an enhanced grip • Ensure that tool is well oiled for correct operation • Self-adjusts with 6 pressure adjustments DIE-LESS BOOTLACE CRIMPER 0.75-10MM2 Unit: EA Qty: 1 Part No. HNKE10 • A ferrule crimper with a unique crimp action • Serrated crimp surface creating an enhanced grip • Ensure that tool is well oiled for correct operation • Self-adjusts with 9 pressure adjustments DIE-LESS BOOTLACE CRIMPER 4-16MM2 Unit: EA Qty: 1 Part No. HNKE11 • A ferrule crimper with a unique crimp action • Serrated crimp surface creating an enhanced grip • Ensure that tool is well oiled for correct operation • Self-adjusts with 6 pressure adjustments 6 TOOLS BOOTLACE CRIMPER STRIPPER AND CUTTER Unit: EA Qty: 1 Part No. HNKE12 • Designed to cut, strip and crimp bootlace ferrules with one tool • Insulation removal from 0.5 to 6mm2 • Two crimp ranges: 0.5 to 2.5 and 4 to 6mm2 • Wire cutter for up to 6mm2 • Weight: 120g. Length: 160mm BOOTLACE CRIMPER 10 TO 50 SQ.MM Unit: EA Qty: 1 Part No. HNKE14 • HNKE14 ratchet crimper for bootlace ferrules sizes 10 to 50 mm with ratchet release lever. • Oval shaped crimp die with indents for conductor grip • Long handles with gripping covers for increased leverage • Dimensions: length 332mm, width 84mm • Weight: 665g BOOTLACE CRIMPER 50-95 SQ.MM Unit: EA Qty: 1 Part No. HNKE15 • HNKE15 ratchet crimper for bootlace ferrules sizes 50 to 95 mm with ratchet release lever. • Oval shaped crimp die with indents for conductor grip • Long handles with gripping covers for increased leverage • Dimensions: length 333mm, width 92mm • Weight: 795g BOOTLACE CRIMPER 120 & 150 SQ.MM Unit: EA Qty: 1 Part No. HNKE16 • HNKE16 ratchet crimper for bootlace ferrules sizes 120 & 150sq. mm with ratchet release lever. • Oval shaped crimp die with indents for conductor grip • Long handles with gripping covers for increased leverage • Dimensions: length 360mm, width 79mm • Weight: 900g BOOTLACE CRIMPER 25 35 AND 50MM2 Unit: EA Qty: 1 Part No. HNKE50 • High precision investment cast jaws • Ratchet controlled to ensure precise and consistent crimping • Emergency release lever • Toggle action leverage to reduce operator effort • Ergonomically designed moulded plastic grips 7 TOOLS K06 DIE- SET Unit: EA Qty: 1 Part No. Y-K06H/3 • Spare die set to suit K06 hexagonal copper lug crimper HEX CRIMPERS HEXAGONAL CRIMPER 6-50MM2 Unit: EA Qty: 1 Part No. K05 • Hexagonal copper lug crimper with range from 6-50mm2 • Dies are self-contained and rotating • Over centre action to ensure complete crimp • Spare die set also available Y-K05H/21 • Pressure range 4-13kg HEXAGONAL CRIMPER 6-120MM2 Unit: EA Qty: 1 Part No. K06 • Hexagonal copper lug crimper with range from 6-120mm2 • Dies are self-contained and rotating • Over centre action ensures a complete crimp • Spare die set also available Y-K06H/3 • Also available with removable handles and a case K06C HEXAGONAL CRIMPER 6-120MM2 M/HANDLE CASE Unit: EA Qty: 1 Part No.
Load more

Recommended publications
  • The Boatswain's Manual
    THE BOATSWAIN'S MANUAL BY WILLIAM A. McLEOD REVISED BY CAPTAIN A. G. W. MILLER GLASGOW BROWN, SON & FERGUSON, LIMITED 4-10 DAHNLEYSTREET CONTENTS CIIAPTERI IN~ODUCTION Ph<et Types or Vessel - Certificates AB. EDH and 1.ifeboatman ............. I CllA~rEaI1 GENERALSlllP FUU~PMENT Ship Fittings and Parts - Anchors and Cahles Time and Watch Bells - Steering Gear - Deck Machinery.. ........................ 16 CHAYIER111 - Mahrla). SLAMANSIIIP Rope Making Materials Splices, Knots. Bends and Hitches - Wire Rape: its Manipulation, Splicing, Worming, Parcelling and Serving - tirades of Canvas - Sewing Boatswain's Chair - Moorings - Sailorising Jobs.. ................................ 46 CHAPTERIV - I>ECK S~ORESAND GFAR Accommodation Ladder - Blocks - Shackles - Tackles Purchaacs --Thimbles - Hooks CargoGear Hatches Dik.................................................... 103 CHAPTERV -- TANKERSAND OTI~LR~RYH.OPMENTS General Tanker Knowledge and Procedure - Refrigcrated Ships - Modern trends in other Cargo Equiprnrnt - Masts and Derricks Cranes - Steel Hatch Covers - Containerisation - Unitisation - Pallctisation - Roll-on, Roll-off - Future trends ......................................................... 138 CHAP~EKVl - BOATSANI) INFLATAULL I.IFFHAV~S Lifrhoats Typca Parts and Equiprnenl - Inflatable Liferafts -- Operatiun and Equiplner>t Boat Stations Launching Handling in Heavy Weather Distrcas Signals Boat Covers and falis - Boats under Oars - Boats under Sail ...I66 CIIAPTF.NVII CLEANINGGLAH Cleaning Materials - Washing and Scruhhing Deck\ -
    [Show full text]
  • Unhcr Wash Equipment Catalogue
    Cover UNHCR WASH EQUIPMENT CATALOGUE December 2016 Foreword Foreword This WASH Equipment Catalogue has been produced by UNHCR‟s WASH and Procurement Departments to improve the acquisition and effective procurement of WASH relief items. The catalogue includes specifications and quality requirements for standard WASH equipment items such as pumps, tapstands, water tanks and water testing equipment. UNHCR has established a number of international Frame Agreements for some of the items to secure an effective supply of these items. Moreover, the organization maintains a stock of some of these WASH materials in its central stockpiles in Dubai and Copenhagen to ensure their immediate delivery in emergency situations. UNHCR also has regional stocks in Accra, Republic of Ghana and in Isaka, Tanzania. Where WASH equipment is procured through other channels or locally all efforts should be made to meet the quality specifications described in this document. The catalogue is intended for use by all actors involved in planning and delivering humanitarian assistance to refugees and UNHCR‟s persons of concern. This includes UNHCR staff and external organizations such as other UN agencies, donors, national governments, manufacturers, and WASH implementing organisations. We hope that UNHCR‟s WASH Equipment Catalogue will be a useful tool for UNHCR operations and the humanitarian community as they endeavour to ensure the timely delivery of the highest quality of assistance to refugees and UNHCR persons of concern worldwide. We are grateful to all UNHCR staff and technical advisors from various WASH agencies for their invaluable advice in preparing and reviewing the specifications within this catalogue. We are especially grateful to OXFAM, UNICEF, IFRC and MSF for their invaluable contribution to the standardisation of WASH emergency equipment and the authorisation to use duplicate items in their respective catalogues in the setting up of the present document.
    [Show full text]
  • Rigging: Guide 1995
    RIGGING GUIDE 1995 WorkCover. Watching out for you. New South Wales Government A guide to rigging Edited by David West Expert advice from Des Highfield, Ivan Bignold, Phil Court, Chris Turner, Barry Haines, Roy Cullen and Jack Campbell 1. Rigging 2. Certification 3. Occupational health and safety Second edition 1997 Disclaimer This publication may contain occupational health and safety and workers compensation information. It may include some of your obligations under the various legislations that WorkCover NSW administers. To ensure you comply with your legal obligations you must refer to the appropriate legislation. Information on the latest laws can be checked by visiting the NSW legislation website (www.legislation.nsw.gov.au) or by contacting the free hotline service on 02 9321 3333. This publication does not represent a comprehensive statement of the law as it applies to particular problems or to individuals or as a substitute for legal advice. You should seek independent legal advice if you need assistance on the application of the law to your situation. © WorkCover NSW Foreword This competency guide has been developed jointly by the WorkCover Authority of NSW and the Victorian WorkCover Authority. It is a major revision of the old and widely respected NSW publication, A guide for riggers. It has been structured to reflect the nationally uniform certificate classes for rigging and conform to the standards for rigging set out in the National OHS Certification Standard for Users and Operators of Industrial Equipment. The text is also consistent with the nationally uniform assessment instruments used by certificate assessors and a range of Australian Standards which cover equipment and work involved with rigging.
    [Show full text]
  • Hand Tools Price List ‘10 Effective 1St February 2010
    Hand Tools Price List ‘10 Effective 1st February 2010 Contents Page Spark Plugs 2 Apprentice Tool Kits – Carpenters, Electricians, Plumbers 3-5 Adjustable Wrenches, Rapid Slide Wrenches, Pipe Wrench, Multi Purpose Cutter 7 Multi-Pliers, Rapid Grip Pliers 8 Locking Pliers 8-9 Linesmans Pliers, High Voltage Pliers, Compound Action Pliers 10 Heavy Duty Diagonal Cutting Pliers, Fixed Joint, Fencing Tools, 11 Dura Pliers Screwdrivers, Screwdriver Kits, 1000V Screwdriver Kits 12-13 Cushion Grip Screwdrivers and Sets 14 Electricians Tools, Crimping Tools, Cable Cutters, Conduit Cutter 15 Wire Strippers, Fish Tape Roll, Lubricant, Bolt Cutters 16 Spanner Sets, Ratcheting Combination Wrenches & Sets 16-17 Security Torx Set, Hex Key Sets, Welders Clamps, Nail Puller, Snips 18 Multi Tools, Caulking Guns, Riveter, Drill Bit Sets 19 Suspension Hangers, Tool Bag & Holster Range 20 Tool Sets 21 Cable Ties 22 Crescent KwikWire™ Suspension System 23-24 KwikWire™ Farrier Tools and Aprons 25-27 General Tapes, Tape Merchandiser 28-32 Long Tapes, Steel Tapes, Fibreglass Tapes, Calibrated Tape 33 Measuring Wheels, Stud Detector 34 Combination Squares, Rafter Squares, Carpenters Squares, Folding Rules, Stainless Steel Rules, Metre Stick, Digital Calipers 35 Spirit Levels, Inclinometers, Bricklayers Line 36 Carpenters Pencils, Warning & Barricade Tapes, Safety Vest, Chalks and Reels 37 Optical and Laser Levels and Accessories 38-41 Leatherware, Knee Protectors 42-46 Saw Blades, Holesaw Kit 47-49 Saws, Hand Saws, Hacksaws, Hacksaw Blades, Glue Gun Kit 49-50 Soldering
    [Show full text]
  • Splitpart5-3.Pdf
    FOR MORE INFORMATION PLEASE VISIT OUR WEBSITE www.kvsengineer.com (click the link to direct to the site) 02-214-0101 GROUP 569 RIVETING TOOLS Heavy Duty Lever Action Riveter Produces strong, vibration proof joints effortlessly. Replaces screws, bolts, ordinary rivets, brazing, soldering and welding. Moulded comfort grip. Long nose design, ideal for use in recessed areas. With enamelled steel body with storage for four nozzles and quick change wrench. Spare Jaws Weight Order Code Price/1 Contents each KEN-569 TB Set of 2 10g -9100K 45.00 Supplied with the following sizes of nozzle: Spare Nozzles 2.4mm (3/32”), 3.2mm (1/8”), 4.0mm (5/32”) Nozzles Weight Order Code Price/1 and 4.8mm (3/16”). Diameter each KEN-569 TB 2.4mm 10g -9020K 89.00 Overall Weight Order Code Price/1 3.2mm 10g -9030K 89.00 Length each KEN-569 TB 4.0mm 10g -9040K 89.00 260mm 840g -3000K 773.00 4.8mm 10g -9050K 89.00 Rivet Nut Inserter Model RNI410 This sturdy professional quality tool has been designed for the insertion of rivet nuts into sheet metal. It has a cast body with a corrosion-resistant powder-coated finish, heavy-duty steel levers with soft grips for user comfort and a knurled adjustment ring for material thickness setting. It also has a pump action mandrel turning shaft for quick loading of fasteners. Includes: Set of five nose piece kits, M4, 5, 6, 8 and 10 plus instruction manual. HAND TOOLS Group Spare Nose Piece Sets Order Code Price/1 644 Contents KEN-569 TB M40 -9300K 567.00 Nozzles Order Code Price/1 M50 -9310K 567.00 Supplied KEN-569 TB M60 -9320K 567.00 M80 -9330K 567.00 M4, 5, 6, 8 & 10 -3080K 7777.00 M10 -9340K 567.00 Rivet Nut Attachment This attachment has been specifically designed to insert rivet nuts into sheet metal.
    [Show full text]
  • Hand Tools Spark-Resistant Tools Are Used to Eliminate the Chances of Accidental Fires Or Explosions in Potentially Combustible Or Explosive Environments
    Group Safety Tools 575 Spark-Resistant Safety Tools Hand Tools Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. Safe for use in high risk hazardous locations, Ideal for chemical, pharmaceutical, power, oil and gas and fire rescue. For gases, vapours and mists the zone classifications are: Zone 0 An atmosphere where a mixture of air and flammable substances in the form of gas, Al-Br Aluminium Be-Cu vapour or mist is present frequently, continuously or for long periods. Bronze Zone 1 An atmosphere where a mixture of air and flammable substances in the form of gas, are manufactured to Be-Cu Al-Br vapour or mist is likely to occur in normal operation occasionally. 20-30HRC and a Zone 2 An atmosphere where a mixture of air and flammable substances in the form of gas, breaking strain of Be-Cu Al-Br vapour or mist is not likely to occur in normal operation but, if it does occur, will persist 782 N/m - 989 N/m.
    [Show full text]
  • Equipment Catalogue
    Humanitarian Department Equipment Catalogue May 2007 (Ninth Edition) Cover photograph: Nega Bazezew, Public Health Engineering Advisor, drilling work. Near Abushuk Camp, Darfur. Contents Introduction 3 Category A Admin and Accomodation 9 Category B Ground Water Development 45 Category C Clothing and Blankets 59 Category D Water Distribution 63 Category F Water Treatment and Testing 91 Category G Fittings 123 Category H Health and Hygiene 145 Category K Communications 173 Category L Latrines and Sanitation 199 Category M Warehousing 217 Category N Nutrition Kits 231 Category O Tools 234 Category P Water Pumping 257 Category R Resources 291 Category S Site Selection, Planning and Shelter 303 Category T Water Storage 313 Category V Vehicles and Accessories 345 Category W Well Digging 385 Category X Vector Control 405 Glossary 419 Index 421 Equipment Catalogue – May 2007 1 2 Equipment Catalogue – May 2007 Introduction INTERNAL USE ONLY May 2007 This catalogue has been produced by the Oxfam GB Humanitarian Department and is primarily intended for use by Oxfam’s programme/project managers, technical, logistics and administrative personnel working in emergency projects overseas. It is to help Oxfam staff become better acquainted with the equipment and to facilitate ordering in an efficient and cost-effective way. It is indented this catalogue will be produced on an annual basis. This Catalogue contains all the specifications for Oxfam GB stock equipment (and some non-stock items). Please note that items written in italics are not Oxfam stock items, but the Logistics Team can order them as required. Kits that are ordered using the Oxfam codes may differ slightly from those listed in this catalogue, because current stocks at the Oxfam GB Logistics Warehouse must be used before Oxfam can replace kits with those of updated specifications.
    [Show full text]
  • Tools & Consumables
    Tools & Consumables Power Tools 94 Detectors & Rangefinders 97 Abrasive Discs 99 Jigsaw Blades 100 Flat Bits & Auger Bits 101 S.D.S. Drill Bits 102 Masonry & Core Drills 103 Glass & Tile Drills 103 H.S.S. Drill Bits 104 Conduit Stocks & Dies 106 Holesaws 107 Hacksaws and Blades 111 Saws & Knives 111 Files 113 Tapes & Rulers 114 Hex Screwdriver Bits 115 Screwdrivers 116 Pliers, Wire Strippers & Cutters 118 Wrenches 122 Spanners 123 Square Drive Sockets 124 Hammers & Chisels 125 Levels 126 Toolboxes & Bags 127 Padlocks 129 Site Lighting, Leads & Transformers 130 Torches 131 Sealants 132 Paint & Brushes 135 Oils & Lubricants 136 Janitorial Supplies 138 Ladders & Podiums 140 PPE & Safety Equipment 141 Please note: prices subject to change without notice 93 Tools & Consumables Tools Bosch Cordless Drills Price £ Each Sales Unit Each Discount Net Model Features Code Price Bosch 36v series SDS plus Cordless Rotary Hammer. Drills as fast as the best 2kg mains powered hammer, Supplied with 2 x 2.6Ah Li-Ion batteries. The 36v Li-Ion batteries are 80% GBH 36V-LI 452014 £579.00 charged after 25 minutes. Drilling capacity: concrete 26mm, steel 13mm, wood 30mm. Weight 4.3kg SDS plus Cordless Rotary Hammer c/w Interchangeable Keyless Chuck. Drills as fast as the best 2kg mains powered hammer, Supplied with 2 x 2.6Ah Li-Ion batteries. The GBH 36VF-LI 452018 £489.00 36v Li-Ion batteries are 80% charged after 25 minutes. Drilling capacity: concrete 26mm, steel 13mm, wood 30mm. Weight 4.5kg SDS plus Compact Cordless Rotary Hammer. Drills as fast as the best 2kg mains powered hammer, Supplied with 2 x 1.3Ah Li-Ion batteries.
    [Show full text]
  • 2014-Liste Des Prix
    Item / Min Description Barcode notre Prix référence Qty Toolbase 0039 Ratchet 1/4"D ToolBase 5018341000394 1 7,78 € 0049 Ratchet 3/8"D ToolBase 5018341000493 1 9,45 € 0088 Ratchet 1/2"D ToolBase 5018341000882 1 12,35 € 1596 Socket Set AF/MM 1/4"D & 3/8"D 40pc ToolBase 5018341015961 1 17,98 € 2553 Socket Set MM 1/4"D 25pc ToolBase 5018341025533 1 27,93 € 3494 Socket Set 1/2"D 24pc ToolBase 5018341034948 1 47,74 € 3508 Socket Set 1/4"D & 3/8"D 39pc ToolBase 5018341035082 1 28,68 € 3515 Socket Set 3/8"D 28pc ToolBase 5018341035150 1 44,34 € 3516 Socket Set 3/8"D & 1/4"D 32pc ToolBase 5018341035167 1 39,12 € 60002 (CD) 24 LED Lamp - ToolBase 5018341600020 12 6,03 € RAC 80001 Vehicle Escape Tracks 2pc Kit 5018341800017 1 30,43 € 80002 Combination Spanner Set 25pc 5018341800024 1 91,04 € 80003 Extending Wheel Wrench 5018341800031 1 16,73 € 80005 (CD) Magnifying Glass With 6 LEDs 5018341800055 6 9,14 € 80007 Folding Snow Shovel 5018341800079 1 23,80 € 80008 (CD) 3 In One Windscreen Cleaner 5018341800086 20 1,83 € 80010 Telescopic Snow Brush/Scraper 5018341800109 1 35,34 € 80011 Telescopic Snow Shovel 5018341800116 1 17,12 € 80012 Recovery Track 5018341800123 1 47,14 € 80015 RAC Winter & Summer Windscreen Covers 2pc 5018341800154 1 8,61 € Schumacher 5602 Memory Saver with EOBD Connector/Rechargeable AGM battery 5018341056025 1 148,77 € 5603 Battery Support Unit - 70amp 5018341056032 1 1.080,54 € 5604 Jump Start 1545 Peak Amps 5018341056049 1 311,63 € 5606 Jump Starter 1900 Peak Amps 5018341056063 1 657,72 € 5607 Jump Starter 4400 Peak Amps 5018341056070
    [Show full text]
  • Hy-Ram Engineering Co. Ltd
    Pipe tool and equipment expertise Innovative design, manufacture and supply of specialist pipe tools and equipment for the utility industries Welcome to… Hy-Ram Engineering Co. Ltd Precision Engineering Since 1976... Formed in 1976, Hy-Ram Engineering Co. Ltd has established itself as a leading design and manufacturer of specialist tools and equipment for both plastic and metallic distribution pipelines… worldwide! Principally working across water, gas, wastewater, landfill and industrial sectors, Hy-Ram provide a range of products and services essential for the provision, jointing, installation and maintenance of utility distribution networks. Hy-Ram’s core product range includes Automated Butt Fusion and Electrofusion equipment, Underpressure Drilling equipment, Squeeze off and Pipe Cutting equipment. ‘In-house’ developments of specialist Water Valves and Fittings have further diversified our comprehensive product range. In addition, Hy-Ram also work collaboratively with ‘key’ partners, an element of this is our alignment with ‘brand leading’ suppliers in order to distribute the ‘complete utility tooling package’ . Much of Hy-Ram’s success is attributed to our reputation for good quality and well engineered products… manufactured and produced at competitive prices. To achieve this reputation, for many years, Hy-Ram has engaged with major worldwide Gas and Water companies and has developed into an important supplier to the UK utility sector and the wider International markets. Hy-Ram’s headquarters and principle manufacturing site is located in Mansfield, England. Equipment is available for Purchase or Hire from our National Sales Team, UK Depot Network or via one of our Authorised Overseas Distributors. Hy-Ram is associated with a number of industry trade organisations designed to influence and improve industry procedures, safe practice, equipment specification and innovation.
    [Show full text]
  • 1 3 2 3 3 3 4 3 5 3 6 3 7 3 8 3 9 250Mm
    17 Harrison Street Marshalltown PAGE NO. P O Box 61542 Marshalltown 2107 CLOSING DATE AND TIME Tel : (011) 688-1400 Fax : (011) 688-1556 24 August 2020 12:00 INITIATING DEPARTMENT INITIATOR Date of Issue 18 August 2020 Electro-Mechanical:Hamberg Depot A Wilsenach QUOTATION REFERENCE COLLECTIVE NO. VALIDITY QUOTATION DATE 7 : DAYS RFQ000168/2020 LM - Re-advert REQUEST FOR QUOTATION QUOTATION REQUESTED FROM QUOTATIONS WILL BE EVALUATED ON THE 80/20 POINT SCORING SYSTEM.80 POINTS WILL BE ALLOCATED TO PRICE AND THE REMAINING 20 POINTS WILL BE ALLOCATED FOR BBBEE AND PREFERENTIAL PROCUREMENT ALL SUPPLIERS RESPONDING TO QUOTATIONS SHOULD BE REGISTERED ON CENTRAL SUPPLIER DATABASE (CSD) JW CONTACT PERSON : Lunga Mbatha TELEPHONE NUMBER: 011 688 1452 Email: [email protected] BRAND NAME QTY PRICE QUOTED EXCL. ITEM NO. DESCRIPTION UOM DIS OFFERED REQUIRED OF V.A.T. Please source 3 quotes as per SCM Policy for Fitter tools 1 810 x 475 x 375mm,2 Slot,Tool trunk 3 2 150mm Adjustable wrench for hexagonal fasteners 3 3 200mm Adjustable wrench for hexagonal fasteners 3 4 100mm Engineering bench vice (All steel) 3 5 24 x 30mm Ratchet podger spanner 3 6 450mm,utility aluminuim Spirit level 3 7 178mm knife (Trimming,retractable blade) 3 8 200mm (8") Straight Pipe wrench,SANS 1028 3 9 250mm (10") Straight Pipe wrench,SANS 1028 3 10 300mm (12") Straight Pipe wrench,SANS 1028 3 11 350mm (14") Straight Pipe wrench,SANS 1028 3 12 450mm (18") Straight Pipe wrench,SANS 1028 3 13 600mm (24") Straight Pipe wrench,SANS 1028 3 14 Screwdriver set (6 piece) 3
    [Show full text]
  • Welding & Engineering Supplies
    lmbridge supplies company uk lmbridge supplies company uk www.elmbridgesuppliesuk.com Welding & Engineering Supplies Welding Equipment Gas Equipment Electrodes & Wires Abrasives Power Tools Engineering Consumables Compressors & Air Tools Cleaning Site & Safety 2016/17 [email protected] 01452 525757 Welcome to Elmbridge Supplies Elmbridge Supplies Company is a leading supplier of: ▪ Welding & Engineering Supplies ▪ Industrial Spray Equipment ▪ Industrial Coatings & Accessories We also supply a range of Compressors, Wood Coatings, Safety Equipment, Power & Hand Tools, and Cleaning Equipment. Our mission is to deliver the solutions which help your business to succeed. This includes a range of products to suit all budgets and specifications, teamed with a service which is second to none. This is assured with our ISO 9001:2008 quality assurance certification and our expert team who have your needs as their number one priority. Our staff have substantial product and industry knowledge so can offer the guidance you require. Demonstrations are available at our workshop in Gloucester or, we PAYMENT can arrange an on-site demonstration to exhibit the advantages of our If you have a Credit Account with us, you may pay by invoice. To register, equipment in your workplace, on a non-obligatory basis. please speak to our Accounts Department. Telephone: 01452 525757 Finance Packages are offered to assist you in the purchasing of Email: [email protected] equipment (subject to approval) as well as Purchase Lease and Contract Hire options. Alternatively, we accept all major credit/debit cards, or you may pay by Sage Pay via our website. SERVICE, MAINTENANCE AND HIRE DELIVERY We offer various service & maintenance packages to keep your We provide a daily delivery service throughout the UK or you may pick equipment in top condition.
    [Show full text]