Division 10 Catalog Washroom Accessories from Bradley

Home , Bedpan

NEW

High Speed, pg High Efficiency Hand Dryers 16

One source to perfectly accessorize every application

BRADLEYCORP.COM BRADLEY WASHROOM ACCESSORIES WARRANTY

Product warranties may be found on bradleycorp.com

ACCESSIBILITY GUIDELINES

Forward and side approaches for unobstructed reach

48” max height 48” max height (1220 mm) (1220 mm)

35” max (889 mm) 38” to 48” to bottom of reflective surface (995-1219 mm) 40” max (1016 mm) 33” to 36” to ensure forward reach allowed over sinks and counters (838-914 mm)

Operable parts must be beneath max height Dimensions change if mounted over counter or lavatory

Note: Information from the ADA-ABA Accessibility Guidelines for Buildings and Facilities found on The United States Access Board website: http://www.access-board.gov/

® BradEX SHIPPING PROGRAM

BX icon next to a model number indicates a BradEX ® item.

All products designated as BradEX products will ship three business days after the date the order has been entered and acknowledged by the Bradley Corporation. Standard shipping terms apply.

Please note: The entire order must consist of BradEX products to qualify for three business day shipping.

Need it faster? One day shipping is available with the Rush Express (BX-RX) shipment option. Maximum quantities apply, please contact your local Bradley representative for further information. CONTENTS

COMMERCIAL RESTROOM SPECIALTY APPLICATIONS

3 Aerix® Hand Dryers 57 Shower Products 57 Shower Seats 4 Grab Bars 61 Shower Curtains 5 Grab Bars 61 Shower Hooks 6 Grab Bar Configurations 62 Shower Rods 11 Grab Bars: Swing 64 Security 12 Aerix Hand Dryers 64 Hooks 66 Grab Bars Towels & Waste 14 66 Shelves 14 Multi-Purpose 68 Mirrors 16 Waste Receptacles 69 Soap Dishes 21 Towel Dispensers 69 Toilet Tissue Holders 27 Combination Units 70 Toothbrush Holders

Soap Dispensers 33 Hospitality 33 Wall-Mounted 71 71 Toothbrush Holders 37 Deck-Mounted 71 Towel Bars & Shelves 74 Soap Dishes 39 Mirrors & Shelves 39 Mirrors 76 Facial Tissue Dispensers 42 Shelves 77 Hooks 80 Towel Rings 43 Toilet Tissue Dispensers 80 Miscellaneous 43 Controlled Delivery 45 Non-controlled Delivery 81 Custodial 46 Jumbo Roll Health Care 49 Combination Units 82

Medicine Cabinets 52 Seat Cover Dispensers 83

Napkin Disposals & Vendors 53 Mills® Partition 53 Napkin Disposals 84 55 Vendors 85 Partition Styles Baby Changing Stations 56 86 Lenox® Lockers

87 Maintenance Instructions

88 Index Washroom Accessory Series

Standard Series Contemporary Series Diplomat™ Series The standard look: framed, A cleaner stainless steel front, no Elevate your room’s look rectangular, stainless steel visible frame, attractive curved with the unique dual-curve accessories openings geometry of Diplomat™ Series Accessories

2 BRADLEY ACCESSORIES BX icon indicates BradEX ® Hand Dryers Bradley's complete line of Aerix hand dryers cover any application or budget. These dryers reduce paper towel and energy costs, protect the environment, keep noise levels down and are easy to use and maintain. NEW Aerix+ dryers incorporate the latest technology for the fastest drying times available. And the vertical, dual-sided dryer has an easy-to-empty water collection tray to keep ﬂoors and walls clean.

New!

The latest dryer technology for ultra fast dry times. Extremely powerful, yet highly efficient.

MODEL 2921 SERIES ADA Vertical, dual-sided dryer with 25% more hand drying space and easy-to-empty water collection resevoir to keep floors and walls spotless. Plus, the intelligent LED display indicates when to empty the water tray and change the HEPA filter. • 10–12 second dry time • Adjustable speed • Intelligent LED display for easy maintenance • High impact cover with antimicrobial technology • HEPA filter with odor neutralizing technology • Quieter operation than popular models • Durable and vandal resistant • ADA compliant 2921-W000

2921-S000

MODEL 2922 SERIES These highly efficient, ultra high speed hand dryers use 40% less energy and offers the longest service life of any high speed hand dryer. Plus, flexible controls let you customize air flow, sound quality and heating options to fit any application. • 10–12 second dry time • Adjustable speed • Longest service life of any high speed dryer • Energy efficient • Customize to fit any application • Cover and internal airflow path with antimicrobial technology 2922-2873 • Durable and vandal resistant

See all Aerix hand dryers on pages 12 - 13

2922-2874

BRADLEY ACCESSORIES 3 GRAB BARS

All Bradley Grab Bars are designed for safety and security of the physically disabled, and feature the 1 ½" (38 mm) safety clearance recommended by Barrier-Free design experts and required under most codes.

Optional Features are listed on page 15. See technical data for BradEX sizes. BX

ANCHORING DEVICES FEATURES

Building construction will govern • Heavy-duty, 18-gauge stainless steel tubing the type of anchorage required. 1-1/2" • Meets or exceeds requirements of ANSI Standard A117.1, ADA and ABA Note: All mounting kits must (38 mm) Accessibility Guidelines for Buildings and Facilities (ADAAG) and Uniform be specified as optional extras. Federal Accessibility Standard (UFAS) Order one kit for each flange. Standard Safety Clearance • Select configurations of the 812 and 817 series meet bariatric load See technical data for details. meets ADA requirements. requirements of the American Society of Healthcare Engineers (ASHE) Bradley will design and manufacture 2010 guidelines for design and construction of healthcare facilities modified bars to satisfy unique installation • Attractive satin finish, safety grip finish or polished safety grip finish applications. Contact your local Bradley • Easy to install with optional anchoring devices representative for information.

HOW TO SPECIFY GRAB BARS HOW TO MEASURE A GRAB BAR 1. Select Series Number (812, 817, 832, etc.) All Grab Bar Conﬁgurations are speciﬁed using centerline to centerline dimensions.

HEAVY-DUTY SERIES

Mounting 1½" (38 mm) diameter 1¼" (32 mm) diameter 1" (25 mm) diameter CL SPECIFY THIS DIMENSION CL 36" Concealed 812 832 852 (914 mm)

Exposed 817 837 857

DO NOT SPECIFY THIS DIMENSION 2. Select Finish Option (standard, safety grip, etc.) 38-1/4" FEATURE ADD SUFFIX (972 mm) Standard 0 Safety Grip Finish 2 Bright Polished Finish 4 • Obtain length of side bars: Bright Polished Finish with Safety Grip 7 Side wall dimension - (Safety clearance 1½" (38 mm) + ½ Diameter of Grab Bar + 2" (51 mm)) • Obtain back bar dimension: 3. Select Grab Bar Conﬁguration (001, 002, 005, etc.) Back wall dimension - (Safety clearance 1½" (38 mm) + ½ Diameter of Grab Bar x 2" (51 mm)) 8 1 2 0-0 0 5 0 0 0 Example: 812 Series Grab Bar:

SERIES CONFIGURATION If wall dimensions are 30" (762 mm) side x 58" (1473 mm) back x 30" (762 mm) side, then: FINISH OPTION Sides: 30" - (1½" + ¾" + 2") = 25¾" (762 mm - (38 mm + 19 mm + 51 mm) = 654 mm) 4. Select Dimensions Required Back: 58" - (1½" + ¾" x 2") = 53½" (1473 mm - (38 mm + 19 mm + 51 mm) = 1359 mm) • If no modiﬁcations are required to the dimensions, Grab Bar dimensions would be 25¾" x 53½" x 25¾" (654 mm x 1359 mm x 654 mm) an example of the Part No. is: “C” DIMENSION IF APPLIES 8 1 2 0- 0 0 5 3 6 2 0 OR BLANK CL

6" CL SERIES “B” DIMENSION SPECIFY " SPECIFY " 1/2L FINISH OPTION “A” DIMENSION CL

COUPLING • Always list dimensions in alphabetical order (i.e., 36" x 20" (914 mm x 508 mm)) 6" CL Note: If modiﬁcations are required to the dimensions other than A, B, or C, or if SPECIFY " fractions are needed, contact Bradley for a submittal and special number. Unless otherwise stated, stand-off will be on long section of bar. All 6" = 152 mm C dimensions shown in diagrams are from wall to centerline of mounting L ﬂange or centerline of grab bar. Standard clearance is 1½" (38 mm).

4 BRADLEY ACCESSORIES BX icon indicates BradEX ® GRAB BARS BRADLEYCORP.COM

812 SERIES

Grab bar of 1½" (38 mm) O.D., 18-gauge stainless steel, seamless construction with exposed surfaces in

5/8" (16 mm) architectural satin ﬁnish. Mounting ﬂanges concealed 1-1/2" * by snap-on escutcheons. Antimicrobial option is (38 mm) available for select sizes. –2 Safety-Grip Finish 3-1/4" (83 mm) –4 High-Polish Finish CONCEALED –7 Safety Grip with Polished Finish on Ends * 1-1/2" (38 mm) WALL CLEARANCE REQUIRED UNDER MOST BUILDING DESIGN CODES

817 SERIES

Grab bar of 1½" O.D. (38 mm), 18-gauge stainless steel, seamless construction with exposed surfaces in

1/8" 1-1/2" * architectural satin ﬁnish. Exposed mounting ﬂanges. (3 mm) (38 mm) –2 Safety-Grip Finish –4 High-Polish Finish

3-1/8" –7 Safety Grip with Polished Finish on Ends (79 mm) EXPOSED * 1-1/2" (38 mm) WALL CLEARANCE REQUIRED UNDER MOST BUILDING DESIGN CODES

832 SERIES

5/8" (16 mm) Grab bar of 1¼" O.D. (32 mm), 18-gauge stainless 1-1/2" * (38 mm) steel, seamless construction with exposed surfaces in architectural satin ﬁnish. Mounting ﬂanges concealed by snap-on escutcheons. 3-1/4" (83 mm) –2 Safety-Grip Finish CONCEALED –4 High-Polish Finish * 1-1/2" (38 mm) WALL CLEARANCE REQUIRED –7 Safety Grip with Polished Finish on Ends UNDER MOST BUILDING DESIGN CODES

837 SERIES

Grab bar of 1¼" O.D. (32 mm), 18-gauge stainless 1/8" (3 mm) 1-1/2" * steel, seamless construction with exposed surfaces in (38 mm) architectural satin ﬁnish. Exposed mounting ﬂanges. –2 Safety-Grip Finish 3-1/8" –4 (79 mm) High-Polish Finish –7 Safety Grip with Polished Finish on Ends EXPOSED

* 1-1/2" (38 mm) WALL CLEARANCE REQUIRED UNDER MOST BUILDING DESIGN CODES

852 SERIES Grab bar of 1" O.D. (25 mm), 18-gauge stainless steel, seamless construction with exposed surfaces in 5/8" (16 mm) 1-1/2" * architectural satin ﬁnish. Concealed mounting ﬂanges. (38 mm) –2 Safety-Grip Finish –4 High-Polish Finish

3-1/4" –7 Safety Grip with Polished Finish on Ends (83 mm) CONCEALED * 1-1/2" (38 mm) WALL CLEARANCE REQUIRED UNDER MOST BUILDING DESIGN CODES

BRADLEY ACCESSORIES 5 GRAB BAR CONFIGURATIONS

TYPICAL WATER CLOSET APPLICATIONS

001 002

Specify length desired. See 048 and 049 A for 45° mounting. 001 over 54" SPECIFY A (1372 mm) requires a center SPECIFY support and becomes 002. 1/2 “A” Select dimensions can support up to 1,000 lb (454 Kg)

33" (838 mm)

When in stalled as speciﬁed, unit meets “Barrier-Free” requirements.

003 004 Standard lengths A = 48", 52" or 54" 48," 52" or 54" (1219 A = (1219 mm, 1321 mm or 1372 mm) 120° ANGLE

mm, 1321 mm or 21" (533 mm) 1372 mm) Only one A = 12" end return. Special (305 mm) size “A” dimensions, center post will only B = 12" be added to models (305 mm) greater than 24" (610 mm).

005 006 “A” dimension Opposite 005. will always have stand B = 16" B = 16" (406 mm) “A” dimension (406 mm) off. A = 32" A = 32" (813 mm) will always have stand (813 mm) off.

6" (152 mm) 6" (152 mm)

010 011 Opposite 010. Note: B = 33" B = 33" (838 mm) When grab (838 mm) bar dimensions are modiﬁed, a support will

12" be added to 12" (305 mm) (305 mm) A = 30" 12" all sections 12" A = 30" (762 mm) (305 mm) longer than 54" (305 mm) (762 mm) 6" 6" (152 mm) (1372 mm). (152 mm)

6 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

C = 24" 5" 012 (610 mm) (127 mm) 039 Conﬁrm clearance +Bar slides to between ﬁxture or accommodate plumbing and grab various size bar in individual water closets. applications. Flat bar – 2" (51 B = 33" (838 mm) mm) wide x 1⁄8" A = 28" (711 mm) (3 mm) thick. 11 ga. bolts

to toilet. B = 22" A = 30" C = 22" (559 mm) (762 mm) (559 mm)

048 039-1 16” Long (shown) A +Bar adjustable for SPECIFY B = 28" 049 right or left hand (711 mm) mounting. Flat Opposite hand. 45° bar – 2" (51 mm) wide x 1⁄8" (3 mm) thick. 11 ga. bolts B = 22" to toilet. (559 mm)

040 B = 9" (229 mm) 041

B = 9" Opposite 040. (229 mm)

A = 32" A = 32" (813 mm) (813 mm)

97° 97°

115 116 6" 6" (152 mm) C = 12" C = 12" (152 mm) (305 mm) Opposite 115. (305 mm)

A = 16" A = 16" (406 mm) (406 mm)

B = 24" B = 24" (610 mm) (610 mm)

BRADLEY ACCESSORIES 7 GRAB BAR CONFIGURATIONS

TYPICAL WATER CLOSET APPLICATIONS 5" C = 24" (127 mm) (610 mm) 054 117 30" x 33" Conﬁrm clearance B = 33" (762 mm x 838 mm) (838 mm) between ﬁxture or A = 16" Note: 1" (25 mm) plumbing and grab (406 mm) not available for this bar in individual application. applications. A = 30" Select dimensions (762 mm) B = 24" can support up to (610 mm) 1,000 lb (454 Kg). 3" (76 mm)

5" 118 (127 mm) 119 5" C = 24" (127 mm) (610 mm) C = 28" Confirm clearance 1-3/4" (Shown) (711 mm) (44 mm) between fixture or Confirm clearance plumbing and grab between fixture bar in individual or plumbing and applications. A = 16" grab bar in (406 mm) A = 16" individual (406 mm) applications.

B = 24" (610 mm) B = 24" (610 mm)

120 059 5" (127 mm) • Opposite 119. C = 28" For special sizes, specify (711 mm) 059 modiﬁed 00" x 00" A = 40" B = 52" (mm x mm). (914 mm) (1321 mm) 6" B side will have (152 mm) stand off. A = 16" (406 mm) Select dimensions can support up to 1,000 lb (454 Kg).

B = 24" (610 mm)

055 057 Select dimensions can support up to B = 30" (762 mm) 1,000 lb (454 Kg). A = 30" (762 mm) 120°

B=24" A=24"

8 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

TYPICAL SHOWER APPLICATIONS

007 032

A = 34" (864 mm) C = 34" (864 mm)

B = 34" (864 mm)

A = 24" (610 mm) B = 25" (635 mm)

033 034 Opposite 032.

C = 26" (660 mm) B = 34" (864 mm) B = 26" 6" (660 mm) (152 mm) A = 24" (610 mm) A = 24" (610 mm) 8" (203 mm) 33" (838 mm)

035 036 Opposite 034.

A = 24" C = 26" (610 mm) (660 mm) 6" B = 26" 6" (152 mm) (660 mm) (152 mm) C = 34" A = 24" (864 mm) (610 mm) 6" (152 mm) 8" (203 mm) B = 24" 33" (610 mm) (838 mm)

037 060 6" (152 mm) A = 36" (914 mm) B = 60" Opposite 036. Specify (1524 mm) 00" x 00" x 00" A = 24" 1/2 L (610 mm) (mm x mm x mm)

6" C = 34" (152 mm) (864 mm) Note: Standard

6" (152 mm) dimensions are 6" (152 mm) 36" x 60" x 36" C = 36" B = 24" (914 mm) (610 mm) (914 mm x 1524 mm x 914 mm) This conﬁguration ships in two pieces which are joined at the coupling. This conﬁguration is UPS-shippable. Select dimensions can support up to 1,000 lb (454 Kg).

BRADLEY ACCESSORIES 9 GRAB BAR CONFIGURATIONS

TYPICAL TUB APPLICATIONS

021 022 12" (305 mm) A = 40" (1016 mm) Opposite 023.

A = 40" (1016 mm) 12" (305 mm)

B = 32" B = 32" (813 mm) (813 mm)

8-1/2" (216 mm) 8-1/2" (216 mm)

12" 023 (305 mm) 024

A = 40" (1016 mm) A = 40" (1016 mm) 12" (305 mm) 6" (152 mm)

B = 32" (813 mm)

8" (203 mm)

8-1/2" (216 mm)

026 12" 027 (305 mm) A = 40" Opposite 027. (1016 mm) A = 40" (1016 mm) 12" 6" (305 mm) 6" (152 mm) (152 mm)

030 031 6" (152 mm)

Opposite 031. A = 36" (914 mm) A = 36" 6" (152 mm) (914 mm) 6" C = 24" C = 24" (152 mm) (610 mm) (610 mm) B = 20" 6" (152 mm) B = 20" (508 mm) (508 mm)

10 BRADLEY ACCESSORIES BX icon indicates BradEX ® GRAB BARS BRADLEYCORP.COM

MODEL 8170-158

B = 29-3/4" (756 mm) MODEL 8170-1581 with Integral Tissue Dispenser 26-3/4" (679 mm) Swing-away grab bar can be rotated to a support or departure position. Locks into support position. ½ 28-5/8" 1 " O.D. (38 mm), 18-gauge stainless steel with exposed (727 mm) A = 33-1/4" surfaces in architectural satin finish. Wall and floor flanges of (845 mm) 3⁄16" (5 mm) thick stainless steel plate. –2 Safety-Grip Finish

BX MODEL 8370-101 Swing-up grab bar swings up when not in use. Designed to prevent it from accidentally falling into position. Operates with less than 5 lb (2.3 Kg) of force. 1¼" O.D. (32 mm), 18-gauge stainless steel with exposed surfaces in architectural satin ﬁnish. Bar projects 29" (737 mm) from wall when in horizontal position. BX –2 Safety-Grip Finish

MODEL 8370-102 BX 6" Bar projects 34" (864 mm) from wall in horizontal position. (152 mm)

9" (229 mm)

29"

29" (737 mm)

BX MODEL 8370-103 Swing-up grab bar with integral tissue dispenser. Swings up when not in use. Operates with less than 5 lb (2.3 Kg) of force. 1¼" O.D. (32 mm), 18-gauge stainless steel with exposed surfaces in architectural satin ﬁnish. Tissue dispenser spindle of ABS plastic with concealed spring. Bar projects 29" (737

6" mm) from wall in horizontal position. (152 mm) –2 Safety-Grip Finish

9" (229 mm)

29" (737 mm)

BRADLEY ACCESSORIES 11 AERIX HAND DRYERS

Bradley’s Aerix® hand dryers save time, money and headaches. NEW Aerix+ models offer the ultimate in high speed, high efficiency hand drying. There is an Aerix model to suit every application!

13" (330mm) BX MODEL 2921-S000 NEW! Aerix+ high speed, vertical dual-sided dryer. Surface- mounted. Adjustable speed. High impact ABS cover in silver. • 10-12 second dry time • 25% greater hand drying opening for more space and comfort 26¼" (667mm) • Easy-to-empty water collection reservoir for clean ﬂoors and walls • Replaceable HEPA ﬁlter Overall dimensions 13" W x 26.25" H x 9.25" D.

BX MODEL 2921-W000 NEW! Surface-mounted. High impact ABS cover in white.

BX MODEL 2922-2873 NEW! 9.3" (236mm) Aerix+ high speed, vertical dual-sided dryer. Surface-mounted. Adjustable speed. White cast aluminum cover with epoxy paint. • 10-12 second dry time • The longest service life of any high speed hand dryer 13" (319mm) • Uses 40% less energy than any high speed hand dryer Overall dimensions 9.3" W x 13" H x 7.6" D.

BX MODEL 2922-2874 NEW! Surface-mounted. Stainless steel ﬁnish cover with satin ﬁnish.

8-3/8" (213mm) BX MODEL 2901-2873 NEW! Surface-mounted. One-piece steel cover with white epoxy ﬁnish. • 12-15 second dry time • Universal voltage

13" • Adjustable speed (330mm) • Quieter operation than other dryers on the market Overall dimensions 8.4" W x 13" H x 611⁄16" D.

BX MODEL 2901-2874 NEW! Surface-mounted. Stainless steel ﬁnish cover with satin ﬁnish.

12 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

BX MODEL 2902-280000 White

Aerix adjustable speed dryer with 3⁄16" (5 mm) thick porcelain 11-5/8" cast iron cover. (295 mm) 9-1/4" (235 mm) • Adjustable speed hand dryer • “No-Touch” sensor operation 7-3/4" (197 mm) • 12-15 second drying time

10-5/8" • Universal voltage (270 mm) • Vandal-resistant • ADA compliant 4" (102 mm) Surface-Mounted Mounting holes match those of most popular models. Overall dimensions 113⁄8" W x 103⁄5" H x 4" D. BX MODEL 2902-287300 1⁄16" (2 mm) thick white enamel coated steel cover.

BX MODEL 2902-287400 1⁄16" (2 mm) thick stainless steel cover with satin ﬁnish.

9-1/4" (235 mm) BX MODEL 2903-280000 White Infrared sensor activation. Cast iron cover. 29 second drying 7-3/4" (197 mm) time. Surface-mounted: mounting holes match those of most popular models. 10" (254 mm) Overall dimensions 111⁄8" W x 10" H x 8¼" D.

BX MODEL 2904-280000 White Push button activation. Cast iron cover.

9-1/4" (235 mm)

7-3/4" (197 mm)

10" (254 mm)

10-1/16" BX (256 mm) 1-1/16" MODEL 2905-287300 White 8-11/16" (27 mm) (221 mm) Modern design. “No-Touch” sensor activation. Steel cover. 38 second drying time. Ideal for medium-to-low trafﬁc and

11-7/8" 10" medium-to-low vandal applications. (302 mm) (254 mm) Overall dimensions 101⁄6" W x 117⁄8" H x 5½" D. 11/16" (17 mm)

1-5/8" Ø 7/8" 1/2" (42 mm) (22 mm) (13 mm)

BRADLEY ACCESSORIES 13 TOWELS & WASTE MULTI-PURPOSE

You need options and we have them. Accessories to fit every washroom – and every budget. Contemporary satin finish stainless steel design to match any decor in recessed, semi-recessed and surface-mounted styles. From stylish restaurants and office buildings to schools and recreation centers, Bradley’s line of accessories will fit any application.

Paper Towel MODEL 1471 Dispenser Soap Recessed unit dispenses 250 multi-fold or 150 C-fold towels. Dispenser 12-3/4" (324 mm) Swing out soap dispenser for ﬁlling with capacity for 40 oz (1.2 L) 10-3/4" of liquid soap. Sight gauge indicates reﬁll time. (273 mm) Rough wall opening 15½" W x 11¼" H x 4" D. –11 Surface-Mounted projects 4" (102 mm) from wall.

15-1/8" (384 mm) 4" (102 mm) 17-1/8" (435 mm)

15-1/8" MODEL 155 (384 mm) Mirrored door 15" W x 18" H (381 mm x 457 mm). 800 multi-fold 30-5/8" (778 mm) or 600 C-fold towel capacity. 5⁄8 1⁄8 28-5/8" Rough wall opening 15 " W x 29 " H x 4" D. (727 mm) –10 Semi-Recessed projects 2" (51 mm) from wall. –11 Surface-Mounted projects 4" (102 mm) from wall. 4" (102 mm)

17-1/8" (435 mm)

14 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

MODEL 198 15-1/8" 3-1/2" 1-1/2" (38 mm) (384 mm) (89 mm) For use behind continuous mirror or ﬁnished wall. 800 multi-fold or 600 C-fold towel capacity. Lock secured.

28-3/4" Rough wall opening 15 5/8" W x 30 1/4" H x 4" D. (730 mm) 12-3/4" (324 mm) Use with ½" (13 mm) thick drywall installations. 10-3/4" (273 mm)

15-1/8" 4" (384 mm) (102 mm) 17-1/8" (435 mm)

MODEL 1981

4" 1-1/2" (102 mm) In-wall mounted towel dispenser for use behind mirror. (38 mm) Dispenses 800 multi-fold or 600 C-fold towels. Lock secures behind hinged dispenser lip which opens for bottom reﬁlling. 17" 19-1/2" (432 mm) Rough wall opening 12½" W x 18½" H x 4" D. (495 mm) (4) Mounting Tabs

7/8" (22 mm) 12" (305 mm)

MODEL 1985 15-1/8" 3-1/2" 1-1/2" (38 mm) (384 mm) (89 mm) For use behind continuous mirror or ﬁnished wall. 800 multi- fold or 600 C-fold towel capacity. Lock secures hinged towel

28-3/4" dispenser lip which opens for reﬁlling from bottom. (730 mm) 12-3/4" (324 mm) 10-3/4" Rough wall opening 155⁄8" W x 30¼" H x 4" D. (273 mm) Use with 5⁄8" (16 mm) thick drywall installations.

15-1/8" 4" (384 mm) (102 mm) 17-1/8" (435 mm)

BRADLEY ACCESSORIES 15 TOWELS & WASTE RECEPTACLES

Bradley Waste Receptacles provide convenience and durability. Units are fabricated of stainless steel with exposed surfaces in architectural satin finish. Recessed units feature one-piece, stainless steel flanges of welded construction with seamless corners, burr-free edges and 1/4" 6 mm) return to conceal wall irregularities.

17-1/8" BX MODEL 3A05 DIPLOMAT SERIES (435 mm) Designed with unique dual-curve geometry. Constructed of architectural satin ﬁnish stainless steel. 12 gal (45.4 L), removable, stainless steel waste receptacle. Secured to cabinet with tumbler lock. Recess-mounted. 30-5/8" (778 mm) Rough wall opening 15¾" W x 293⁄16" H x 4" D. 24" (610 mm) –10 Semi-Recessed 2" (51 mm) in wall, projects 611⁄16" (170 mm) from wall. –11 Surface-Mounted projects 811⁄16" (221 mm) from wall.

DIPLOMAT SERIES 16-11/16" BX MODEL 3A15-11 (424 mm) Designed with unique dual-curve geometry. Constructed of architectural satin ﬁnish stainless steel. 16.5 gal (62.5 L), stainless 23-3/8" steel waste receptacle. (594 mm) Unit measures 1611⁄16" W x 233⁄8" H x 1111⁄16" D.

CONTEMPORARY SERIES 12" MODEL 3157 (305 mm) Recessed unit with push-ﬂap door and 9.2 gal (34.8 L), 9" (229 mm) removable, leak-proof, molded-plastic insert. Rough wall opening 12½" W x 47½" H x 6½" D. 47" 49-1/4" (1194 mm) (1251 mm) –10 Semi-Recessed 3" (76 mm) in wall, projects 3¾" (95 mm) 3" (76 mm) from wall.

–11 Surface-Mounted projects 6¾" (171 mm) from wall.

9" (229 mm) 14-1/4" (362 mm) 6-3/4" (171 mm) 1/2" (13 mm)

16 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

7-7/8" (200 mm) 12" MODEL 3251 (305 mm) Recessed unit with 2.8 gal (10.6 L), removable, leak-proof, 28" (711 mm) molded-plastic, waste receptacle insert. Tumbler lock. Push-ﬂap door with full-length piano hinge covers receptacle opening. 26" 18" (660 mm) (457 mm) Rough wall opening 12½" W x 26½" H x 4" D. –10 Semi-Recessed 2" (51 mm) in wall, projects 2" (51 mm) from wall. –11 Surface-Mounted projects 4" (102 mm) from wall. 14" (356 mm) 4" (102 mm) 1/4" (6 mm)

MODEL 3257 CONTEMPORARY SERIES 12-1/8" (308 mm) Recessed unit with push-ﬂap door and 2.8 gal (10.6 L), 5" removable, leak-proof, molded-plastic insert. (127 mm)

28-1/4" Rough wall opening 125⁄8" W x 265⁄8" H x 4" D. 1-1/4" (718 mm) (32 mm) –10 Semi-Recessed 2" (51 mm) in wall, projects 2" (51 mm) from wall. 26-1/8" (664 mm) –11 Surface-Mounted projects 4" (102 mm) from wall.

5" (127 mm) 14-1/4" (362 mm) 4" (102 mm) 1/2" (13 mm)

12" MODEL 315-35 (305 mm) 6-7/8" (175 mm) Recessed unit with full-length piano hinge and tumbler lock keyed alike to companion Bradley units. 9.2 gal (34.8 L),

49" removable, leak-proof, molded-plastic insert. Push-ﬂap door (1245 mm) 47" with full-length piano hinge covers receptacle opening. (1194 mm) 39" (991 mm) Rough wall opening 12½" W x 47½" H x 7½" D. –10 Semi-Recessed 3½" (89 mm) in wall, projects 4" (102 mm) from wall. –11 Surface-Mounted projects 7½" (191 mm) from wall. 14" 7-1/2" (356 mm) (191 mm)

BX MODEL 334 15¹⁄₈" (384mm) Recessed waste receptacle shall be fabricated of heavy gauge 8¾" (222mm) stainless steel with seamless exposed surfaces in satin ﬁnish.

Mounting Removable 18 gal (68.1 L) stainless steel waste receptacle. Hole (qty. 4) Dim. "A" to ﬁnished ﬂoor Heavy-duty vinyl liner is optional. Receptacle secured to cabinet 28⁵⁄₈" (727mm) with tumbler lock. 3 14⁵⁄₈" 2 " (371mm) (584mm) Overall dimensions: 171⁄8" W x 305⁄8" H x 12¾" D.

1⁹⁄₁₆" (40mm)

4" (102mm) 1" (25mm) 17¹⁄₈" (435mm)

BRADLEY ACCESSORIES 17 TOWELS & WASTE RECEPTACLES

RECESSED

15-1/8" MODEL 344 (384 mm) BX 4-3/4" 12-gallon, removable, stainless steel waste receptacle. Secured (121 mm) to cabinet with tumbler lock. Heavy-duty, reusable, 12 gal (45.4 (4) MOUNTING L) liner available as an accessory. Order separately using part 28-5/8" HOLES 23" (727 mm) (584 mm) number P11-004. 14-5/8" (371 mm) Rough wall opening 155⁄8" W x 291⁄8" H x 4" D. 1-9/16" ¾ (40 mm) Receptacle projects 4 " (121 mm). MODEL 344-35 Hinged Cover Unit 4" 1" HINGED COVER -35 (102 mm) (25 mm) 17-1/8" HINGED COVER with (435 mm) PUSH FLAP DOOR -65 MODEL 344-65 Push-Flap Door Unit

–10 Semi-Recessed 2" (51 mm) in wall, projects 6¾" (171 mm) from wall. –11 Surface-Mounted projects 8¾" (222 mm) from wall.

15¹⁄₈" 4¾" MODEL 346 (384mm) (121m) Recessed waste receptacle made of heavy gauge stainless steel

Mounting Dim. "A" to with seamless exposed surfaces and tumbler lock. in satin finish. Hole finished floor (qty. 4) Removable 12 gal (45.4 L) stainless steel waste receptacle.

28⁵⁄₈" (727mm) 23" Heavy-duty vinyl liner is optional. tumbler lock. (584mm) Hinged Cover with 14⁵⁄₈" Push Flap Door -65 (371mm) Rough wall opening 155⁄8"W x 291⁄8" H x 6" D.

1⁹⁄₁₆" (40mm) –10 Semi-Recessed 4" (102 mm) in wall, projects 4¾" (121 mm)

4" from wall. (102mm) 1" (25mm) 17¹⁄₈" (435mm) –11 Surface-Mounted projects 8¾" (222 mm) from wall. Hinged Cover -35

SURFACE-MOUNTED

11-1/2" MODEL 355 18" (457 mm) (292 mm) 20.6 gal (78 L), stainless steel waste receptacle. Heavy-duty, reusable, 20.6 gal (78 L) liner available as an accessory. Order 23" separately using part number P11-005. (584 mm) Unit measures 18" W x 23" H x 11½" D.

MODEL 355-35 Hinged Cover Unit

HINGED

HINGED COVER-35 HINGED COVER with PUSH FLAP DOOR-65

18 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

MODEL 356 9" (229 mm) 18" (457 mm) 16.5 gal (62.5L), stainless steel waste receptacle. Heavy-duty, reusable, 16.5 gal (62.5L) liner available as an accessory. Order separately using part number P11-006. 23" (584 mm) Unit measures 18" W x 23" H x 9" D. MODEL 356-35 Hinged Cover Unit

HINGED COVER

MODEL 3565 12 gal (45.4 L), stainless steel waste receptacle.

6" (152 mm) 14" BX MODEL 357 (356 mm) 6.5 gal (24.6 L), stainless steel waste receptacle. Heavy-duty, reusable, 6.5 gal (24.6 L) liner available as an accessory. Order 18" separately using part number P11-007. (457 mm) Unit measures 14" W x 18" H x 6" D. MODEL 357-35 Hinged Cover Unit

MODEL 359 10-5/8" 4-1/2" (114 mm) (270 mm) 1.5 gal (5.8 L), stainless steel waste receptacle. Utilizes disposable, wet-strength paper liner.

9-1/8" Unit measures 105⁄8" W x 91⁄8" H x 4½" D. (232 mm)

BRADLEY ACCESSORIES 19 TOWELS & WASTE RECEPTACLES

FREESTANDING

MODEL 377 Freestanding, 13 gal (49.2 L), stainless steel waste receptacle. Removable swing top. ½ ½ 12-1/2" Unit measures 29 " H x 12 " SQ. 12-1/2" (318 mm) (318 mm) MODEL 377-37 Less Swing Top 29-1/2" (749 mm) MODEL P15-025 Cover Only

22" (559 mm)

MODEL 377-36 Freestanding, 21 gal (79.5 L), stainless steel waste receptacle. Removable swing top. ½ 14" 14" Unit measures 37 " H x 14" SQ. (356 mm) (356 mm) MODEL 377-3637 Less Swing Top

37-1/2" (953 mm) MODEL P15-098 Cover Only

30" (762 mm)

MODEL 377-38 Freestanding, 36 gal (136.3 L), stainless steel waste receptacle. Removable swing top. Unit measures 37½" H x 18" SQ. 18" 18" (457 mm) (457 mm) MODEL 377-3738 Less Swing Top

37-1/2" MODEL P15-195 Cover Only (953 mm)

30" (762 mm)

BX MODEL P10-696 Unit fabricated of stainless steel of drawn seamless construction and bright polished ﬁnish. 6-11/16" (170 mm) Countertop rough-in 6" (152 mm) diameter hole. Overall dimensions 6¾" (171 mm) diameter x 3½" (89 mm) D.

20 BRADLEY ACCESSORIES BX icon indicates BradEX ® TOWELS & WASTE DISPENSERS BRADLEYCORP.COM

3-13/16" (97 mm) MODEL 2A00 DIPLOMAT SERIES

17-1/8" (435 mm) Designed with unique dual-curve geometry. Constructed of architectural satin ﬁnish stainless steel. Dispenses 800 multi-fold

19-3/16" or 600 C-fold towels. (497 mm) 30-5/8" ½ 1⁄8 (778 mm) Rough wall opening 15 " W x 29 " H x 4" D. –10 Semi-Recessed 2" (51 mm) in wall, projects 49⁄16" (116 mm) from wall.

17-1/8" DIPLOMAT SERIES (435 mm) MODEL 2A01 Lever operated towel dispenser delivers preset length of towel (5½" (140 mm) per stroke). Towel dispenser capacity is one standard core 8" (203 mm) W x 8" (203 mm) diameter standard roll paper towels. 19-3/16" (497 mm) Rough wall opening 15½" W x 291⁄8" H x 9¾" D. 30-5/8" (778 mm) –10 Semi-Recessed 4" (102 mm) in wall, projects 8½" (216 mm) from wall. –11 Surface-Mounted projects 12½" (318 mm) from wall.

17-1/8" DIPLOMAT SERIES (435 mm) MODEL 2A02 Sensor-activated roll paper towel dispenser delivers 10" (254 mm) per operation. Towel dispenser capacity is one standard core 8" (203 mm) W x 8" (203 mm) diameter standard

19-3/16" roll paper towels. (497 mm)

30-5/8" Rough wall opening 15½" W x 291⁄8" H x 9¾" D. (778 mm) –10 Semi-Recessed 4" (102 mm) in wall, projects 8½" (216 mm) from wall. –11 Surface-Mounted projects 13¼" (337 mm) from wall.

17-1/8" DIPLOMAT SERIES (435 mm) MODEL 2A09 Designed with unique dual-curve geometry. Constructed of architectural satin ﬁnish stainless steel. Designed for ﬁeld installation of customer-provided towel dispenser.

19-3/16" Suggested use with 2496 and 2497. (497 mm) 30-5/8" Rough wall opening 15½" W x 291⁄8" H x 9¾" D. (778 mm) –10 Semi-Recessed 4" (102 mm) in wall, projects 8½" (216 mm) from wall. –11 Surface-Mounted projects 13¼" (337 mm) from wall.

11" (279 mm) BX MODEL 2A10-11 DIPLOMAT SERIES Designed with unique dual-curve geometry. Constructed 14-3/8" 13-11/16" of architectural satin ﬁnish stainless steel. Surface-mounted, (365 mm) (348 mm) paper towel dispenser. Dispenses 800 multi-fold or 600 C-fold towels. Unit measures 11" W x 143⁄8" H x 5¼" D.

BRADLEY ACCESSORIES 21 TOWELS & WASTE DISPENSERS

MODEL 244 12" (305 mm) Constructed of architectural satin ﬁnish stainless steel. 17" (432 mm) Dispenses 800 multi-fold or 600 C-fold towels. Rough wall opening 12½" W x 265⁄8" H x 4" D. 26-1/8" (664 mm) –10 Semi-Recessed 2" (51 mm) in wall, projects 2" (51 mm) from wall. 28" (711 mm) –11 Surface-Mounted projects 4" (102 mm) from wall.

14" (356 mm) 4" (102 mm)

BX MODEL 2441 10-7/8" (276 mm) Constructed of architectural satin ﬁnish stainless steel. 10" (254 mm) Dispenses 475 multi-fold or 350 C-fold towels.

15-3/16" 17-1/8" Rough wall opening 113⁄8" W x 1511⁄16" H x 4" D. (386 mm) (435 mm) –10 Semi-Recessed 2"(51 mm) in wall, projects 2" (51 mm) from wall. –11 Surface-Mounted projects 4" (102 mm) from wall.

12-3/4" 4" (324 mm) (102 mm)

CONTEMPORARY SERIES 1/4" DIA. (4) MOUNTING HOLES BX MODEL 2442

10-29/32" 1/2" (277 mm) (13 mm) Constructed of architectural satin ﬁnish stainless steel.

3-1/2" Dispenses 400 multi-fold or 300 C-fold towels. (89 mm) 17-3/8" Rough wall opening 1113⁄32" W x 15¾" H x 4" D. (441 mm) 15-1/4" (387 mm) –10 Semi-Recessed 21⁄8" (54 mm) in wall, projects 2" (51 mm) from wall.

3-1/2" (89 mm) –11 Surface-Mounted projects 41⁄8" (105 mm) from wall. 1-7/8" (48 mm) 13" (330 mm) 4-1/8" (105 mm)

CONTEMPORARY SERIES 12-3/16" MODEL 2447 (310 mm) Constructed of architectural satin ﬁnish stainless steel.

5" (127 mm) Dispenses 800 multi-fold or 500 C-fold towels.

26-1/8" 28-1/4" 11⁄16 5⁄8 (664 mm) (718 mm) Rough wall opening 12 " W x 26 " H x 4" D. –10 Semi-Recessed 15⁄8" (41 mm) in wall, projects 2½" (64 mm) 16" (406 mm) from wall. –11 Surface-Mounted projects 41⁄8" (105 mm) from wall. 1-1/4" (32 mm)

14-1/4" (362 mm) 4-1/8" (105 mm) 1/2" (13 mm)

22 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

MODEL 247 12" (305 mm) Constructed of architectural satin ﬁnish stainless steel. Dispenses

17" single-fold, 800 multi-fold or 500 C-fold towels. (432 mm) Rough wall opening 12½" W x 265⁄8" H x 7½" D. 26-1/8" (664 mm) –10 Semi-Recessed 3½" (89 mm) in wall, projects 4" (102 mm) 28" (711 mm) from wall. –11 Surface-Mounted projects 7½" (191 mm) from wall.

14" 7-1/2" (191 mm) (356 mm)

MODEL 2479 Constructed of architectural satin ﬁnish stainless steel. Dispenses

30-5/8" (829 mm) one standard core center pull towel roll up to 9" x 9" (229 mm x 229 mm) diameter. Rough wall opening 153⁄16" W x 28¾" H x 111⁄8" D. –10 Semi-Recessed 3½" (89 mm) in wall, projects 8" (203 mm) from wall.

17-1/8" (435 mm) 11-1/8" (283 mm)

11" MODEL 2482-11 (279 mm) Constructed of architectural satin ﬁnish stainless steel. Surface-mounted, roll paper towel dispenser. Push-bar operated. Baked-enamel towel dispenser mechanism. Unit dispenses non-perforated roll towels up to 8" (203 mm) in diameter and 8" (203 mm) wide with core sizes from 1½" 17" (38 mm) to 2" (51 mm). 432 mm) Unit measures 11" W x 17" H x 10½" D.

10-3/8" BX MODEL 2483 12-1/4" (264 mm) (311 mm) Constructed of architectural satin ﬁnish stainless steel. Surface-mounted, roll paper towel dispenser. Lever operated. Dispenses one standard core 8" (203 mm) or 9" (229 mm) wide 15" 10-3/16" (381 mm) (259 mm) x 800' (243.9 M) long paper towel roll. Unit measures 12¼" W x 15" H x 103⁄8" D.

BRADLEY ACCESSORIES 23 TOWELS & WASTE DISPENSERS

MODEL 2484

17-1/8" (435 mm) Recessed or semi-recessed towel dispenser constructed of stainless steel with exposed surfaces in satin ﬁnish. Cabinet 17-1/8" (435 mm) door secured with full length piano hinge and tumbler lock.

15-1/8" Towel dispenser operated with less than 5 lb (2.3 Kg) of (384 mm) force. Dispenses one standard core 8" (203 mm) or 9" (229 10-45/64" (272 mm) mm) wide x 800' (243.9 M) long paper towel roll. Unit measures 171⁄8" W x 171⁄8" H x 10½" D.

15-1/8" (384 mm)

BX MODEL 2494 12.27" (312mm) Constructed of high impact material. Door is translucent, and fabricated from durable high-impact plastic. Dispenses non- perforated roll towels up to 8" (203 mm) in diameter and 8" (203 mm) wide with core sizes from 1½" (38 mm) to 2" (51 mm). Dispenser also allows for 3" (76 mm) diameter stub roll. Operates with 4 “D” size alkaline batteries. Batteries are not included. Automatic transfer system will integrate stub roll when the primary is nearly depleted. Low battery indicator. 2.14" (54mm) Sheet is fully protected until dispensed. The transfer system, roll holders and door are ﬁeld replaceable. Complies with FCC regulation on EMC. Unit measures 127⁄16" W x 15¾" H x 9½" D.

12-15/16" MODEL 2495 (329 mm) Constructed of high-impact plastic. Black translucent cover with speckled gray base. Black plastic handle is treated with Bio-Pruf® to inhibit bacteria growth. Dispenses one 8" (203 mm) wide paper towel roll and one 4" (102 mm) partial (stub) roll. 1½" (38 mm) core diameter. Lever-operated dispensing 16-1/2" (419 mm) mechanism will provide an adjustable means to dispense a nominal 5" (127 mm), 4" (102 mm) or 2½" (64 mm) of Bradley toweling per lever stroke. Toweling will only be dispensed with the downward stroke of the lever. Unit measures 1215⁄16" W x 16½" H x 9¼" D.

24 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

BX MODEL 2496 Constructed of high impact material. Door is translucent, and fabricated from durable high-impact plastic. Dispenses non- perforated roll towels up to 8½" (216 mm) in diameter and 8" 16-1/2" (419 mm) (203 mm) wide with core sizes from 1½" (38 mm) to 2" (51 mm). Dispenser also allows for 4" (102 mm) diameter stub roll. Bradley A 10" (254 mm) towel will be dispensed every time the sensor is activated. Operates with 4 “D” size alkaline batteries (not included). Automatic transfer system will integrate stub roll 11-3/4" when the primary is nearly depleted. A ﬂashing red indicator (298 mm) light indicates that batteries need to be replaced. Unit measures 11¾" W x 16½" H x 9¼" D.

BX MODEL 2497 Constructed of high-impact plastic. Fiberglass-reinforced ABS plastic push lever. Dispenses non-perforated paper 15-11/16" (144 mm) towels from 8" (203 mm) wide roll with core sizes from 1½" (38 mm) to 2" (51 mm) diameter. Dispenser also allows for 4" (102 mm) diameter stub roll. The push lever Bradley dispensing mechanism delivers 5½" (140 mm) of toweling 2-9/16" (65 mm) with each stroke. Unit measures 109⁄16" W x 1511⁄16" H x 85⁄8" D.

10-9/16" (268 mm)

MODEL 250-15 11" BX (279 mm) Constructed of architectural satin ﬁnish stainless steel. Surface- mounted, paper towel dispenser. Dispenses 525 multi-fold or 400 C-fold towels. Tumbler lock and bottom hinged. Reﬁll indicator on cabinet face. 15-5/16" (389 mm) Unit measures 11" W x 155⁄16" H x 4" D. –33 White Enamel Finish –1578 Bright Polish Finish –250W-15 Frequency Towel Dispenser 4" (102 mm)

BRADLEY ACCESSORIES 25 TOWELS & WASTE DISPENSERS

BX MODEL 251-15 11" (279 mm) Constructed of architectural satin ﬁnish stainless steel. Surface- mounted, paper towel dispenser. Dispenses 400 single-fold towels. Tumbler lock and bottom hinged. Reﬁll indicator on 8-1/8" cabinet face. 7-9/16" (206 mm) (192 mm) Unit measures 11" W x 81⁄8" H x 61⁄16" D. –33 White Enamel Finish

6-1/16" (154 mm)

BX MODEL 252

11" Constructed of architectural satin ﬁnish stainless steel. Surface- (279 mm) mounted, paper towel dispenser. Dispenses 350 multi-fold or 200 C-fold towels. Cabinet secured with tumbler lock and hinges at bottom. Reﬁll indicator on cabinet face.

8" Unit measures 11" W x 8" H x 4" D. (203 mm) –78 Bright Polish Finish

4" (102 mm)

MODEL 259 Surface-mounted, roll paper towel dispenser. Constructed of die-cast aluminum. Controlled delivery mechanism. Spring allows spindle to be released for ﬁlling. Holds one standard 1-3/4" core roll paper towels to 6" (152 mm) diameter x 11" (279 (44 mm) 13" (330 mm) mm) wide. Unit measures 13" W x 1¾" H x 4" D.

4" (102 mm)

26 BRADLEY ACCESSORIES BX icon indicates BradEX ® TOWELS & WASTE COMBINATION UNITS BRADLEYCORP.COM

17-1/8" (435 mm) BX MODEL 2A05 DIPLOMAT SERIES Designed with unique dual-curve geometry. Constructed of architectural satin ﬁnish stainless steel. Dispenses 800 multi- fold and 600 C-fold paper towels. 12 gal (45.4 L), stainless steel waste receptacle.

56" (1422 mm) Rough wall opening 15¾" W x 54½" H x 4" D. –10 Semi-Recessed 2" (51 mm) in wall, projects 611⁄16" 36-5/8" 930 mm) (170 mm) from wall. –11 Surface-Mounted projects 811⁄16" (221 mm) from wall.

17-1/8" (435 mm) MODEL 2A15-36 DIPLOMAT SERIES Lever operated towel dispenser delivers preset length of towel (5½" (140 mm) per stroke). Towel dispenser capacity is one standard core 8" (203 mm) W x 8" (203 mm) diameter

56" standard roll paper towels. 21 gal (79.5 L) stainless steel (1422 mm) waste receptacle.

36-5/8" 930 mm) Rough wall opening 155⁄8" W x 545⁄8" H x 97⁄8" D.

–1036 Semi-Recessed 4" (102 mm) in wall, projects 1011⁄16" (271 mm) from wall. –1136 Surface-Mounted projects 1411⁄16" (373 mm) from wall.

17-1/8" (435 mm) MODEL 2A25-36 DIPLOMAT SERIES Sensor-activated roll paper towel dispenser delivers 10" (254 mm) per operation. Towel dispenser capacity is one standard core 8" (203 mm) W x 8" (203 mm) diameter standard 56" (1422 mm) roll paper towels. 21 gal (79.5 L) stainless steel waste receptacle.

36-1/2" 927 mm) Rough wall opening 155⁄8" W x 545⁄8" H x 97⁄8" D. –1036 Semi-Recessed 4" (102 mm) in wall, projects 1011⁄16" (271 mm) from wall. –1136 Surface-Mounted projects 1411⁄16" (373 mm) from wall.

17-1/8" MODEL 2A95-36 DIPLOMAT SERIES (435 mm) Designed with unique dual-curve geometry. Constructed of architectural satin ﬁnish stainless steel. Designed for ﬁeld installation of customer-provided towel dispenser. Suggested use with 2494, 2496, and 2497. 21 gal (79.5 L) stainless steel waste receptacle.

56" (1422 mm) Rough wall opening 155⁄8" W x 545⁄8" H x 97⁄8" D. –1036 Semi-Recessed 3½" (89 mm) in wall, projects 95⁄16" (237 mm) 36-13/16" from wall. (935 mm) –1136 Surface-Mounted projects 1213⁄16" (325 mm) from wall.

BRADLEY ACCESSORIES 27 TOWELS & WASTE COMBINATION UNITS

BX MODEL 2017 CONTEMPORARY SERIES

11-1/4" (286 mm) Constructed of architectural satin ﬁnish stainless steel. 55" (1397 mm) Dispenses 1,100 single-fold, 800 multi-fold or 600 C-fold 9" (229 mm) towels. Waste receptacle has push-ﬂap door and 4.9 gal (18.5 L), removable, molded-plastic insert. 2" (512" mm) (51 mm) Rough wall opening 11¾" W x 535⁄8" H x 5¾" D. 53-1/8" 35-5/8" (1349 mm) (904 mm) BX –10 Semi-Recessed 3½" (89 mm) in wall, projects 2½" (64 mm) C L of Towel from wall. Dispenser 9" (229 mm) –11 Surface-Mounted projects 6" (152 mm) from wall.

5-1/2" (140 mm) 13" (330 mm)

1/2" (13 mm) 6" (152 mm)

BX MODEL 2027 CONTEMPORARY SERIES 11-1/4" (286 mm) 8" Constructed of architectural satin ﬁnish stainless steel. Dispenses (203 mm) 9" 800 multi-fold or 600 C-fold towels. Waste receptacle has 3.3 gal (229 mm) 55" (1397 mm) (12.5 L), removable, molded-plastic insert. 1" (25 mm) Rough wall opening 11¾" W x 535⁄8" H x 3¾" D. 35-5/8" (905 mm) 3⁄8 53-1/8" –10 Semi-Recessed 2 " (60 mm) in wall, projects 2" (51 mm) C (1349 mm) L of Towel from wall. Dispenser –11 Surface-Mounted projects 43⁄8" (111 mm) from wall. 9" (229 mm) 27-5/8" (702 mm) 3-5/8" (92 mm) 4-1/8" 13" (330 mm) (105 mm) 1/2" (13 mm)

15-1/4" MODEL 2037 CONTEMPORARY SERIES (387 mm)

9" 56-1/4" Constructed of architectural satin ﬁnish stainless steel. Dispenses (229 mm) (1429 mm) 1,100 single-fold, 800 multi-fold or 600 C-fold towels. Waste

2" receptacle has 11.2 gal (42.4 L), removable, molded-plastic (51 mm) 36-1/4" insert. 54-1/8" (921 mm) (1375 mm) Rough wall opening 15¾" W x 545⁄8" H x 7½" D. –10 Semi-Recessed 3¾" (95 mm) in wall, projects 4" (102 mm) 9" (229 mm) from wall. –11 Surface-Mounted projects 7¾" (197 mm) from wall.

7-3/4" 17-3/8" (441 mm) (197 mm) 1/2" (13 mm)

28 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

MODEL 225 12" (305 mm) Constructed of architectural satin ﬁnish stainless steel. Adjustable towel guide dispenses 1,000 single-fold, 800 multi-fold or 600 16" (406 mm) C-fold towels. Waste receptacle has 9.2 gal (34.8 L), removable, 74" (1180 mm) leak-proof, molded-plastic insert. Rough wall opening 12½" W x 72¾" H x 7¾" D. 55-3/8" 72-1/8" (1407 mm) (1832 mm) –10 Semi-Recessed 3½" (89 mm) in wall, projects 4" (102 mm) from wall. –11 Surface-Mounted projects 7½" (191 mm) from wall. 39" (991 mm)

7-3/4" (197 mm) 14" (356 mm)

12" (305 mm) MODEL 2251 10-1/2" (267 mm) Constructed of architectural satin ﬁnish stainless steel. Dispenses 450 multi-fold or 250 C-fold towels. Waste receptacle has 5.3 gal (20.1 L), removable, molded-plastic insert. 58-3/4" 56-27/32" (1492 mm) (1444 mm) Rough wall opening 12½" W x 5711⁄32" H x 4" D. –10 Semi-Recessed 2" (51 mm) in wall, projects 2" (51 mm) from wall. 39" (991 mm) –11 Surface-Mounted projects 4" (102 mm) from wall.

4" (102 mm) 14" (356 mm) 1/4" (6 mm)

12" (305 mm) MODEL 2252

16" Constructed of architectural satin ﬁnish stainless steel. Adjustable (406 mm) towel guide dispenses 1,000 single-fold, 700 multi-fold or 400

56" C-fold towels. Waste receptacle has 4.9 gal (18.5 L), removable, (1422 mm) leak-proof, molded-plastic insert. 54-1/8" (1375 mm) 40" (1016 mm) To of Lip CL Rough wall opening 12½" W x 545⁄8" H x 7½" D. 21" (533 mm) –10 Semi Recessed 3½" (89 mm) in wall, projects 4" (102 mm) from wall. ½ 2" Finished –11 Surface Mounted projects 7 " (191 mm) from wall. 14" (51 mm) Floor (356 mm) 7-1/2" (191 mm)

BRADLEY ACCESSORIES 29 TOWELS & WASTE COMBINATION UNITS

17-1/8" (435 mm) MODEL 227 Constructed of architectural satin ﬁnish stainless steel. Towel 12" (305 mm) dispenser capacity is one standard core 8" (203 mm) or 9" 50-1/2" (1283 mm) (229 mm) wide x 800' (243.9 M) long paper towel roll. Waste receptacle is 18 gal (68.1 L) removable stainless steel.

54-1/8" 56" (1375 mm) (1422 mm) Rough wall opening 155⁄8" W x 545⁄8" H x 10½" D. –10 Semi-Recessed 3½" (89 mm) in wall, projects 95⁄16" (237 mm) 23" from wall. (584mm) –11 Surface-Mounted projects 1213⁄16” (325 mm) from wall.

10-1/2" (267 mm) 15-1/8" (384 mm)

1 1 4 ⁄8" 17 ⁄8" (435mm) ¼" (105mm) (6mm) MODEL 2271 Unit without Roll Towel Mechanism

18" (457mm) Designed for ﬁeld installation of customer-provided towel 3" (76mm) dispenser. Suggested use with 2494, 2496 or 2497.

1 54 ⁄8" 5⁄8 5⁄8 ½ (1375mm) Rough wall opening 15 " W x 54 " H x 10 " D.

56" ½ 5⁄16 (1422mm) –10 Semi Recessed 3 " (89 mm) in wall, projects 9 " (237 mm) from wall.

23" 7" 13⁄16 (584mm) (178mm) –11 Surface Mounted projects 12 " (325 mm) from wall.

7 1 2 ⁄8" 15 ⁄8" (73mm) 5 (384mm) 2 ⁄16 " (59mm) 10½" (267mm)

BX MODEL 2277 CONTEMPORARY SERIES 15-1/4" (387 mm) 41-1/4" (1048 mm) Constructed of architectural satin ﬁnish stainless steel. Dispenses 3" (76 mm) one standard core roll 8" (203 mm) or 9" (229 mm) wide x 800' 2" 34" (243.9 M) long paper towel roll. Waste receptacle has 10.5 gal (51 mm) (864 mm) 9" (37.7 L), removable, molded-plastic insert. (229 mm) 39" (991 mm) 19-3/8" Rough wall opening 15¾" W x 39½" H x 10¼" D. (492 mm) –10 Semi-Recessed 3½" (89 mm) in wall, projects 7" (178 mm) from wall. 7-1/2" (191 mm) –11 Surface-Mounted projects 10½" (267 mm) from wall. 17-3/8" (441 mm)

10-1/2" 1/2" (267 mm) (13 mm)

MODEL 229 12" (305 mm) 5" (127 mm) Constructed of architectural satin ﬁnish stainless steel. Dispenses 200 multi-fold or 100 C-fold towels. Waste receptacle has 1.25 18" (457 mm) gal (4.7L), removable, stainless steel insert. 16-1/8" 6" (410 mm) (152 mm) Rough wall opening 12½" W x 16½" H x 4" D. –10 Semi-Recessed 2" (51 mm) in wall, projects 2" (51 mm) from wall.

4" –11 Surface-Mounted projects 4" (102 mm) from wall. (102 mm) 14" (356 mm)

30 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

12" BX MODEL 2291 (305 mm)

11-1/2" 28" (292 mm) (711 mm) Constructed of architectural satin ﬁnish stainless steel. Dispenses 475 multi-fold or 350 C-fold towels. Waste receptacle has 2 gal 26" (660 mm) 15-31/32" (7.6 L), removable, stainless steel insert. (406 mm)

9" ½ ½ (229 mm) Rough wall opening 12 " W x 26 " H x 4" D. –10 Semi-Recessed 2" (51 mm) in wall, projects 2" (51 mm) from wall.

BX –11 Surface-Mounted projects 4" (102 mm) from wall. 14" (356 mm) 4" (102 mm) 1/4" (6 mm)

CONTEMPORARY SERIES 12-3/16" BX MODEL 2297 (310 mm)

13" Constructed of architectural satin ﬁnish stainless steel. Dispenses (330 mm) 5-1/16" 475 multi-fold or 350 C-fold towels. Waste receptacle has 1.7 gal (129 mm) (6.4 L), removable, molded-plastic insert. 28-1/4" 26-1/8" (718 mm) (664 mm) Rough wall opening 1211⁄16" W x 265⁄8" H x 4" D.

5-1/16" –10 Semi-Recessed 15⁄8" (41 mm) in wall, projects 2½" (64 mm) (129 mm) from wall. –11 Surface-Mounted projects 41⁄8" (105 mm) from wall. 2-3/8" (60 mm)

14-1/4" (362 mm) 4-1/8" (105 mm) 1/2" (13 mm)

15-1/4" (387 mm) BX MODEL 234

18" Constructed of architectural satin ﬁnish stainless steel. Dispenses (457 mm) 800 multi-fold or 600 C-fold towels. 12 gal (45.4 L), stainless 36-7/16" (926 mm) steel waste receptacle is secured with tumbler lock.

54-1/8" 4-3/4" (1375 mm) (121 mm) Rough wall opening 15¾" W x 54½" H x 4" D.

MODEL 234-35 Hinged Cover 56" 23" (584 mm) (1422 mm) MODEL 234-65 Push-Flap Door Unit

3-13/16" BX –10 Semi-Recessed 2" (51 mm) in wall, projects 6¾" (171 mm) (97 mm) from wall. BX 17-1/8" (435 mm) –11 Surface-Mounted projects 8¾" (222 mm) from wall.

15-1/4" (387 mm) BX MODEL 235 18" (457 mm) Constructed of architectural satin ﬁnish stainless steel. Dispenses 800 multi-fold or 500 C-fold towels. Waste receptacle has 4.9 gal

54-1/8" (18.5 L), removable, leak-proof, molded-plastic insert. (1375 mm) Rough wall opening 15¾" W x 545⁄8" H x 4" D.

56" 24" –10 Semi-Recessed 2" (51 mm) in wall, projects 2" (51 mm) (610 mm) (1422 mm) from wall.

4" –11 Surface-Mounted projects 4" (102 mm) from wall. (102 mm)

17-1/8" (435 mm)

BRADLEY ACCESSORIES 31 TOWELS & WASTE COMBINATION UNITS

7-3/8" 4-1/8" 15-1/4" (187 mm) (105 mm) (387 mm) MODEL 236 18" (457 mm) Constructed of architectural satin ﬁnish stainless steel. Dispenses one standard center-pull towel roll up to 9" (229 mm) wide x 9" (229 mm) diameter. 12 gal (45.4 L), stainless 54-1/8" (1375 mm) 1-1/4" steel waste receptacle. (32 mm) 23" Rough wall opening 15¾" W x 54½" H x 7½" D. (584 mm) 56" (1422 mm) –10 Semi-Recessed 35⁄8" (92 mm) in wall, projects 77⁄8" (200 mm) from wall. –11 Surface-Mounted projects 11½" (292 mm) from wall. 17-1/8" (435 mm)

15-1/4" (387 mm) MODEL 237

18" (457 mm) Constructed of architectural satin ﬁnish stainless steel. Dispenses 1,100 single-fold, 800 multi-fold or 600 C-fold towels. 12 gal (45.4 L), stainless steel waste receptacle. 1-1/4" (32 mm) 54" MODEL 237-35 Hinged Cover (1372 mm) MODEL 237-65 Push-Flap Door Unit 56" (1422 mm) 23" (584 mm) Rough wall opening 15¾" W x 54½" H x 7½" D.

7-1/2" –10 Semi-Recessed 3½" (89 mm) in wall, projects 4" (102 mm) (191 mm) from wall.

17-1/8" (435 mm) –11 Surface-Mounted Projects 7½" (191 mm) from wall.

15-1/4" (387 mm) MODEL 238

18"(457 mm) Constructed of architectural satin ﬁnish stainless steel. Dispenses 1,100 single-fold, 800 multi-fold or 600 C-fold towels. 8.2 gal (31 L) waste receptacle, removable, leak-proof, molded-plastic 54-1/4" (1378 mm) insert.

24" ¾ ¾ ½ 56" (610 mm) Rough wall opening 15 " W x 54 " H x 7 " D. (1422 mm) –10 Semi-Recessed 3½" (89 mm) in wall, projects 4" (102 mm) 7-1/2" from wall. (191 mm) –11 Surface-Mounted Projects 7½" (191 mm) from wall. 17-1/8" (435 mm)

MODEL 270 12-3/4" (324 mm) Convenient, space-saving 3-in-1 unit 9" (229 mm) 3-in-1 towel dispenser, hand dryer and waste receptacle. Constructed of architectural satin ﬁnish stainless steel. Recessed towel dispenser holds 710 single-fold, 500 multi-fold or 370 54" (1372 mm) C-fold paper towels. Waste receptacle has 4.37 gal (16.5 L) capacity. Hand dryer has sensor activation with universal voltage.

56" 32-1/4" Rough wall opening 13" W x 54¼" H x 5½" D. (1422 mm) (819 mm) Unit measures 147⁄8" W x 56" H x 6¼" D. –10 Semi-Recessed 3½" (89 mm) in wall, projects 2¾" (70 mm) from wall. 6-1/4" (159 mm) –11 Surface-Mounted projects 6¼" (159 mm) from wall. 14-7/8" (378 mm) –49 For Export CE certiﬁed.

32 BRADLEY ACCESSORIES BX icon indicates BradEX ® SOAP DISPENSERS WALL MOUNTED BRADLEYCORP.COM

Bradley Soap Dispensers are constructed of stainless steel with exposed surfaces in architectural satin finish. Units feature one-piece, stainless steel flange of welded construction with seamless corners, burr-free edges and 1/4" (6 mm) return to conceal minor wall irregularities. Tumbler locks keyed alike to companion Bradley units.

4-5/8" DIPLOMAT SERIES (117 mm) BX MODEL 6A00-11 Designed with unique dual-curve geometry. Constructed of architectural satin ﬁnish stainless steel. Surface-mounted, automatic, liquid soap dispenser with 27 oz (798 ml) capacity.

10-9/16" Can also dispense hand sanitizer. Red light indicates low battery. (268 mm) Unit measures 45⁄8" W x 109⁄16" H x 43⁄16" D. MODEL 6A01-11 NEW! Foam soap dispenser with 27 oz (798 mL capacity.

RECESSED

MODEL 643 8-1/16" 2" (51 mm) 4-1/32" (205 mm) (102 mm) Recessed, horizontal, liquid soap dispenser. Stainless steel 4-1/32" (102 mm) cabinet with plastic soap vessel. Buna-N check valves to prevent leaking. Slides open for ﬁlling. Holds 32 oz (946 ml) liquid soap. Sight gauge on dispenser. ADA compliant. Requires less than 5 lb 2-1/32" (52 mm) (2.3 Kg) of force to operate. Rough wall opening 8½" W x 4½" H x 4" D. 2" (51 mm)

10" (254 mm) MODEL 644 Vertically mounted unit with stainless steel soap vessel. 31/32" (25 mm) Rough wall opening 4½" W x 8½" H x 4" D. MODEL 646 Vertically mounted unit with plastic soap vessel. Rough wall opening 4½" W x 8½" H x 4" D.

MODEL 6437 CONTEMPORARY SERIES 2" (51 mm) 8" (203 mm) Recess-mounted liquid soap dispenser of satin-ﬁnish stainless 4" (102 mm) 6-1/4" (159 mm) steel. Plastic soap vessel holds 32 oz (946 ml) of liquid soap. 4" (102 mm) Sight gauge on dispenser. ADA compliant. Requires less than 5 lb

2" (51 mm) (2.3 Kg) of force to operate. 1" (25 mm) 10-1/4" Rough wall opening 8½" W x 4½" H x 4" D. (260 mm) 4-1/32" (102 mm) 5/32" (4 mm)

BRADLEY ACCESSORIES 33 SOAP DISPENSERS WALL MOUNTED

5-1/8" 5-1/2" (130 mm) (140 mm) MODEL 6531 Stainless steel with architectural satin ﬁnish. Locked cover removes for ﬁlling. Holds 44 oz (1301 ml) liquid soap. Push-in- 7-1/2" (191 mm) type valve delivers measured amount of liquid soap. Unit measures 51⁄8" W x 7½" H x 3" D.

3" (76 mm)

SURFACE-MOUNTED

8-3/16" (208 mm) BX MODEL 6542 Horizontal Liquid, tank-type soap dispenser of satin ﬁnish stainless steel.

4-7/8" Holds 40 oz (1183 ml) liquid soap. Push-in-type valve. Concealed (124 mm) mounting. ADA compliant. Requires less than 5 lb (2.3 Kg) of force to operate. Unit measures 83⁄16" W x 47⁄8" H x 27⁄8" D. 2-7/8" (73 mm) 5-3/8" (137 mm) Valve projects 2½" (64 mm) from wall.

4-13/16" (122 mm) BX MODEL 6562 Vertical Liquid, tank-type soap dispenser of satin ﬁnish stainless steel. Holds 40 oz (1183 ml) liquid soap. Push-in-type valve. Concealed 8-3/16" (208 mm) mounting. ADA compliant. Requires less than 5 lb (2.3 Kg) of force to operate. Unit measures 413⁄16" W x 83⁄16" H x 27⁄8" D. Valve projects 2½" (64 mm) from wall. 2-7/8" (73 mm)

5-3/8" (137 mm)

BX MODEL 6563 Vertical

13 4 ⁄16" (122mm) Liquid, tank-type soap dispenser of stainless steel with black ABS plastic valve. Holds 40 oz (1183 ml) liquid soap. Push-in- type valve. Surface mounting. ADA compliant. Requires less than

3 8 ⁄16" (208mm) 5 lb (2.3 Kg) of force to operate. Ideal for higher end hospitality and other commercial restrooms. Unit measures 413⁄16" W x 83⁄16" H x 27⁄8" D. Valve projects 2½" (64 mm) from wall. 3¾" (95mm)

7 2 ⁄8" (73mm)

34 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

2-3/8" (60 mm) 3-3/8" MODEL 648 (86 mm) 1-5/8" (41 mm) Liquid soap dispenser features chrome-plated bracket,

2-5/16" (59 mm) translucent polyethylene globe and push-up-type valve with corrosion-resistant components and vacuum-ﬂow control.

3-1/8" (79 mm) Holds 16 oz (473 ml) liquid soap. Swivels for ﬁlling.

7" (178 mm) Unit measures 33⁄8" W x 7" H x 5¼" D.

5-1/4" (133 mm) MODEL 6481 UNIT WITH NO SWIVEL (SHOWN)

4" (102 mm) 1-1/4" (32 mm) Min. Clearance Required MODEL 650 BX MODEL 6501 Liquid soap dispenser with push-up-type valve. Translucent 9-1/2" (241 mm) polyethylene globe, chrome-plated ABS bracket. Valve is black ABS with stainless steel spring.

3" (76 mm) MODEL 650 Unit measures 4" W x 9½" H x 41⁄8" D. Holds 32 oz (946 ml) diagram shown. 2-3/4" (70 mm) MODEL 6501 3-1/4" 4-1/8" (83 mm) (105 mm) Unit measures 4" W x 77⁄8" H x 41⁄8" D. Holds 24 oz (710 ml).

2-7/8" MODEL 655 4-13/16" (73 mm) (122 mm) Liquid, tank-type soap dispenser with vertical valve. Fabricated of stainless steel with exposed surfaces in architectural satin ﬁnish. Holds 40 oz (1183 ml) liquid soap. ADA compliant. Requires less than 5 lb (2.3 Kg) of force to operate. 8-3/16" (208 mm) Unit measures 413⁄16" W x 83⁄16" H x 27⁄8" D.

2-3/4" (70 mm)

MODEL 657 Liquid soap dispenser. Chrome-plated brass with plastic container and chrome-plated plastic assembly. Holds 12 oz 3/4" (355 ml) liquid soap. Concealed mounting. 3-3/16" (81 mm) (19 mm) DIA. Unit measures 33⁄16" W x 6" H x 57⁄8" D. 6" (152 mm) (from wall to end of valve). 5-9/32" (134 mm) Valve projects 211⁄16" (68 mm) from wall. 1-3/16" (30 mm)

6-3/8" (162 mm) 5-7/8" 4 HOLES (149 mm) .213" (5 mm) DIA. COUNTER SUNK FOR #10 FLAT HEAD SCREW BRADLEY ACCESSORIES 35 SOAP DISPENSERS WALL MOUNTED

MODEL 658-30 Powdered soap dispenser of polished and satin ﬁnish

4-5/8" stainless steel. Stainless push knob, springs and discharge (117 mm) mechanism. Holds 32 oz (946 ml) powdered soap. Locked top covers ﬁller hole. 3 HOLES 4-1/2" .200" (5 mm) DIA. Unit measures 4½" W x 71⁄8" H x 45⁄8" D. (114 mm)

2-1/4" (57 mmm))

7-1/8" (181 mm)

6-1/8" (156 mm)m

MODEL 6583

4-7/8" (124 mm) Powdered soap dispenser of satin ﬁnished stainless steel with chrome-plated brass valve. Holds 32 oz (946 ml) powdered soap. Locked top covers ﬁller hole. Concealed mounting.

8-3/16" Unit measures 47⁄8" W x 83⁄16" H x 27⁄8" D. (208 mm)

2-7/8" (73 mm)

MODEL 661 Shelf-type, liquid soap dispenser. Stainless steel with architectural satin ﬁnish. Chrome-plated brass and ABS valve. 80 oz (2366 ml) liquid soap reservoir. Vandal-resistant sight

5-1/4" gauge. Hinged shelf with concealed latch raises for ﬁlling. ADA (133 mm) compliant. Requires less than 5 lb (2.3 Kg) of force to operate. 17-1/2" (445 mm) Unit measures 17½" W x 3¼" H x 5¼" D.

MODEL 662 Unit with two liquid soap valves to mount between two lavatories.

3-1/4" (83 mm)

36 BRADLEY ACCESSORIES BX icon indicates BradEX ® SOAP DISPENSERS DECK MOUNTED BRADLEYCORP.COM

LAVATORY-MOUNTED

BX MODEL 6315-KT0000 (Soap Dispenser Starter Kit: 6315, 1 bottle of soap, 4 “D” size batteries.) Sensor-operated soap dispenser with 5½" (140 mm) spout length. ADA compliant. Reliable Infrared Metering Activation. LED light indicators for low battery and low soap 5-1/2" (140 mm) refill. Spout fabricated of chrome-plated plastic. Requires 1" (25 mm) diameter hole in lavatory or countertop 1½" (38 mm) 4" (102 mm) Soap Size Setting BX from edge of sink. 2" (51 mm) Maximum Reset Button MODEL 6315 Soap Dispenser Only 6-9/16" Requires (4) AC ADAPTOR (167 mm) “D" Cells Batteries (not included) P19-231F Single soap dispenser adaptor P19-231G Adaptor for up to 4 dispensers (need P19-231H for each dispenser) 5-5/8" A” (143 mm) P19-231H Wire assembly (to be used with P19-231G which requires 1 of these for each dispenser to be hooked up); up to 4 per P19-231G adaptor 3-1/8" (79 mm) P19-232A 2,000-shot non-refillable bottle Soap/Bottle B” Not Included 1-5/8" P19-232B 1,000-shot non-refillable bottle (41 mm)

2-1/2" MODEL 6322 (64 mm) Liquid soap dispenser with 2½" (64 mm) spout length. 2-3/4" Polyethylene container holds 16 oz (473 ml) liquid soap. (70 mm) 2" (51 mm) DIA. Stainless steel plunger and spout. Special key provided.

3-1/2" Requires 1" (25 mm) diameter mounting hole. Shank length (89 mm) 4¾" (121 mm) – can be shortened in ﬁeld. ADA compliant. MAX. 13/16" (21 mm) MTG. THK. DIA. Requires less than 5 lb (2.3 Kg) of force to operate. Spout is ﬁxed.

MODEL 6322-67 Unit with 16-oz (473 ml) stainless steel soap container.

MODEL 6322-68 Unit with 32-oz (946 ml) polyethylene soap container.

4" (102 mm) BX MODEL 6324 Liquid soap dispenser with 4" (102 mm) spout length and 4¾" 2-3/4" (70 mm) (121 mm) shank. Polyethylene container holds 16 oz (473 mm) liquid soap. ADA compliant. Requires less than 5 lb (2.3 Kg) of 3-1/2" (89 mm) 2" (51 mm) force to operate. Spout is ﬁxed. MAX. DIA. MTG. THK. MODEL 6324-67 13/16" (21 mm) DIA. Unit with 16 oz (473 ml) stainless steel soap container.

MODEL 6324-68 BX Unit with 32 oz (946 ml) polyethylene soap container.

BRADLEY ACCESSORIES 37 SOAP DISPENSERS DECK MOUNTED

6" (152 mm) BX MODEL 6326 2-3/4" (70 mm) Liquid soap dispenser with 6" (152 mm) spout length. Polyethylene container holds 16 oz (473 ml) liquid soap. ADA 3-1/2" compliant. Requires less than 5 lb (2.3 Kg) of force to operate. (89 mm) MAX. 2" (51mm) Spout is ﬁxed. MTG. THK. DIA. 13/16" (21 mm) MODEL 6326-67 Unit with 16 oz (473 ml) stainless steel soap container. DIA. BX MODEL 6326-68 Unit with 32 oz (946 ml) polyethylene soap container.

3-1/2" MODEL 6334 (89 mm) Liquid soap dispenser with 3½" (89 mm) spout length. 2-3/8" Polyethylene container holds 16 oz (473 ml) liquid soap. (60 mm) Chrome plated brass plunger and spout. Special key provided. Required 1¼" (32 mm) diameter hole in lavatory or countertop. ADA compliant. Requires less than 5 lb (2.3 Kg) of force to operate. 9-1/4" (235 mm)

2-5/8" (67 mm)

9" (229 mm) MODEL 6843 Foot-operated, medical soap dispenser. Housing of ABS plastic with stainless steel spout. Holds 32 oz (946 ml) and unscrews for ﬁlling. Foot pump of molded rubber with anti-slip base and 8' (2.4 M) vinyl tubing dispenses surgical liquid soaps, 9-1/2" (241 mm) detergents and aseptic solutions with depression of pedal. Unit measures 11½" H x 4½" D. Spout projects 9" (229 mm) from wall.

4-1/2" (114 mm)

38 BRADLEY ACCESSORIES BX icon indicates BradEX ® MIRRORS AND SHELVES BRADLEYCORP.COM

Bradley Mirrors are made of first quality 1/4" (6 mm) float glass for a clean, contemporary look and an exclusive backing for long-lasting use. Guaranteed against silver spoilage for 15 years. Frames fabricated of stainless steel with theft-resistant mounting brackets. Angle Frame and Channel Frame Mirrors feature one- piece, roll-formed frames for strength. Frames guaranteed 15 years against corrosion. Choose Angle Frame style for welded, polished corners and Channel Frame style for neatly mitered corners. Optional Features are listed on page 43.

MODEL 780 Angle framed mirror. ¾" x ¾" (19 mm x 19 mm) satin ﬁnish, stainless steel angle frame with welded and polished ¼ HEIGHT corners. " (6 mm) thick glass. Wall hanger of 18-gauge steel provides theft-resistant mounting. Galvanized steel back plate with shock-absorbing, waterproof ﬁller. Standard or barrier-free applications.

3/4" (19 mm) ® WIDTH BX See technical data for BradEX sizes.

MODEL 7805 Angle framed mirror with shelf. ¾" x ¾" (19 mm x 19 mm) satin finish stainless steel angle frame with welded and polished corners. ¼" (6 mm) thick glass. 5½" (140 HEIGHT mm) W satin finish stainless steel shelf welded to frame. Shelf has flanged front and sides. Wall hanger of 18-gauge steel provides vandal- and theft-resistant mounting. Galvanized steel back plate with shock-absorbing, waterproof filler.

1" 3/4" (19 mm) (25 mm) WIDTH Standard or barrier-free applications.

BX See technical data for BradEX ® sizes.

MODEL 781 Channel framed mirror. ¾" x ¾" x 7⁄16" (19 mm x 19 mm x 11 mm) channel frame of stainless steel with bright annealed HEIGHT ﬁnish. Neatly mitered corners. ¼" (6 mm) thick glass. Wall hanger of 18-gauge steel provides vandal- and theft-resistant mounting. Galvanized steel back plate with shock-absorbing, waterproof ﬁller.

3/4" (19 mm) WIDTH BX Standard or barrier-free applications. See technical data for BradEX ® sizes.

MODEL 7815 Channel-framed mirror with shelf. ¾" x ¾" x 7⁄16" (19 mm x 19 mm x 11 mm) frame of stainless steel with bright annealed finish. Neatly mitered corners. ¼" (6 mm) thick HEIGHT glass. 5½" (140 mm) W satin finish stainless steel shelf welded to frame. Wall hanger of 18-gauge steel provides vandal- and theft-resistant mounting. Galvanized steel back plate with shock-absorbing, waterproof filler. 1" (25 mm) 3/4" (19 mm) WIDTH Standard or barrier-free applications. BX See technical data for BradEX ® sizes.

BRADLEY ACCESSORIES 39 MIRRORS AND SHELVES

TILT MIRRORS

MODEL 740 Fixed-angle, tilt frame of satin ﬁnish stainless steel. ¾" x ¾" (19 mm x 19 mm) frame with welded and polished corners. 1⁄4" (6 mm) thick glass. Theft-resistant mounting bracket. HEIGHT Standard or barrier-free applications. See technical data for projection from wall BX and BradEX® sizes.

3/4" (19 mm) WIDTH

MODEL 7405 Fixed-angle, tilt mirror with integral welded stainless steel shelf. ¾" x ¾" (19 mm x 19 mm) frame with welded and polished corners. ¼" (6 mm) thick glass. Shelf is 5½" (140 mm) W, welded to frame, ﬂanged front and sides with welded, polished corners. Theft-resistant mounting bracket. Standard or barrier-free applications.

1/2" (13 mm) 3/4" (19 mm) WIDTH

MODEL 782 Adjustable tilt mirror. ¾" x ¾" (19 mm x 19 mm) frame is bottom hinged and has welded, polished corners. ¼" (6 mm) thick glass. Two friction elbow hinges on top allow unit to tilt

"W" 1" (25 mm) 6" up to maximum 6" (152 mm) from wall. Standard projection is (152 mm) MAX. 4" (102 mm).

Standard or barrier-free applications.

"H"

40 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

FRAMELESS MIRRORS

WIDTH MODEL 747 Frameless ¼" (6 mm) thick glass mirror. Metal clip fasteners. Only available in standard glass.

HEIGHT Standard or barrier-free applications.

BX See technical data for BradEX ® sizes.

WIDTH MODEL 747F Frosted, frameless mirror with ﬁrst quality ¼" (6 mm) thick glass mirror. Metal clip fasteners. Only available in standard HEIGHT glass. –S Solid Acid-Etched Border –P Plaid Acid-Etched Border

UNBREAKABLE STAINLESS STEEL MIRROR

MODEL 748 (4) MOUNTING HOLES "W" Unframed mirror of stainless steel polished to No. 8 architectural bright ﬁnish. Mirror has ¼" (6 mm) return to conceal ¼" (6 mm) tempered Masonite backing. Fastens "H" with tamper-resistant screws.

3/4" (19 mm) Standard or barrier-free applications.

MODEL 7481 In bright annealed stainless steel. Standard or barrier-free applications. 3/4" 3/4" (19 mm) (19 mm)

3/4" (19 mm)

OPTIONAL FEATURES - Options available on select Bradley models.

FEATURES ADD SUFFIX ¼" (6mm) Tempered glass mirror – 2 Laminated glass mirror – 3 300 Series stainless steel polished to a No. 8 architectural-grade ﬁnish in lieu of glass – 4 400 Series bright annealed stainless steel in lieu of glass – 5 Plexiglass mirror – 6

Note: Tempered, laminated, plexiglass and stainless steel provide extra security from broken glass but may differ in color and reflectivity from standard mirrors.

BRADLEY ACCESSORIES 41 MIRRORS AND SHELVES

STAINLESS STEEL SHELVES

Surface-mounted shelves fabricated of stainless steel with exposed surfaces in architectural satin ﬁnish.

MODEL 755 5" (127 mm) Width

BX –18 18" (457 mm) Length

LENGTH AS REQUIRED MODEL 756 6" (152 mm) Width

MODEL 758 8" (203 mm) Width

BX –24 24" (610 mm) Length 3-3/4" (95 mm)

3/8" (10 mm)

MODEL 760 18" (457mm) 10" (254mm) Recessed shelf shall be fabricated of 22 gauge stainless steel with exposed surfaces in satin ﬁnish. 8½" (216mm) Unit measures 19½" W x 10" H x 4" D.

19½" (495mm)

Surface-mounted shelves fabricated of stainless steel with exposed surfaces in architectural satin ﬁnish. 10" 3" (254 mm) AS SPECIFIED (76 mm) BY CUSTOMER MODEL 7510 10" (254 mm) Width

3" MODEL 7512 12" (305 mm) Width (76 mm)

4" (102 mm)

CHROME-PLATED ZINC SHELF

MODEL 790 Surface-mounted, fold-down utility shelf. Fabricated of heavy-duty, chrome-plated zinc die cast with textured shelf area. Rear hinged shelf folds down for use. Holds up to 150 lb (68 Kg). Automatically returns to vertical position. Unit measures 5" W x 147⁄8" D. –SS Stainless Steel

4" (102 mm)

5" (127 mm)

42 BRADLEY ACCESSORIES BX icon indicates BradEX ® TOILET TISSUE DISPENSERS BRADLEYCORP.COM

Bradley Toilet Tissue Holders and Seat Cover Dispensers provide a complete selection of surface-mounted, recessed and partition-mounted units. Toilet Tissue Holders are available in single and multi-roll models, some with integral shelves.

6-7/8" DIPLOMAT SERIES (175 mm) MODEL 5A00 Designed with unique dual-curve geometry. Constructed of architectural satin ﬁnish stainless steel. Recess-mounted, non-controlled delivery toilet tissue holder. Cabinet holds 12-1/8" (308 mm) two rolls up to 4½" (114 mm) W x 5¼" (133 mm) diameter standard core toilet tissue. Molded polyethylene spindles. Rough wall opening 6" W x 111⁄8" H x 4" D.

5-11/16" MODEL 5A10 DIPLOMAT SERIES (145 mm) BX Designed with unique dual-curve geometry. Constructed of architectural satin ﬁnish stainless steel. Surface-mounted, non-controlled delivery toilet tissue holder. Cabinet holds 10-7/8" two rolls up to 4½" (114 mm) W x 5¼" (133 mm) diameter (276 mm) standard core toilet tissue. Molded polyethylene spindles. Unit measures 59⁄16" W x 107⁄8" H x 63⁄16" D.

MODEL 5A20 DIPLOMAT SERIES 12-7/16" (316 mm) Designed with unique dual-curve geometry. Constructed of architectural satin ﬁnish stainless steel. Partition-mounted, non-controlled delivery toilet tissue holder. Double-sided unit 12-1/8" includes single-roll dispenser with roll-in-reserve serving (308 mm) each compartment. Each cabinet holds two rolls up to 4½" (114 mm) W x 5¼" (133 mm) diameter standard core toilet tissue. Molded polyethylene spindles. Rough wall opening 111⁄8" H x 11½" W.

Mounting Holes

SURFACE-MOUNTED

5-7/8" (149 mm) MODEL 5061

2-3/4" Controlled delivery with vandal-resistant locking device and (70 mm) constant roll tension. Exclusive adjusting mechanism 5" 4-1/4" (127 mm) (108 mm) accommodates rolls from 4¼" (108 mm) W to 4¾" (121 mm) W. Holds one standard core roll through 6" (152 mm) in diameter.

4-1/4" to 4-3/4" Unit measures 57⁄8" W x 2¾" H x 5" D. (108 mm to 121 mm)

BRADLEY ACCESSORIES 43 TOILET TISSUE DISPENSERS

BX MODEL 505 Single Roll 5-1/2" (140 mm) BX MODEL 522 Double Roll 2-3/8" (60 mm) Controlled delivery. Chrome-plated, die-cast zinc. Unit features hinged arm with spring catch for ﬁlling and tension spring on

4-1/4" ﬁxed arm. Holds one (two) standard core roll(s) through 5" (108 mm) (127 mm) in diameter and 4½" (114 mm) wide. 10-1/2" (267 mm) Single roll unit measures 5½" W x 23⁄8" H x 4¼" D.

2-7/16" (62 mm) Double roll unit measures 10½" W x 27⁄16" H x 4¼" D.

4-1/4" (108 mm)

1/8" (3 mm) 3" MODEL 5053 Single Roll (76 mm) Controlled delivery. Epoxy-coated aluminum. One-piece 3-1/8" (79 mm) construction with hinged arm and snap lock, which is concealed by tissue roll. No removable parts. 2" (51 mm) Unit measures 51⁄8" W x 2" H x 31⁄8" D.

5-1/8" (130 mm)

6" (152 mm) 4-1/2" BX MODEL 5054 Single Roll (114 mm) 3-1/2" (89 mm) MODEL 5224 Double Roll 2-3/4" BX (70 mm) Controlled delivery. Heavy-duty, chrome-plated steel. Vandal- resistant locking mechanism. Hinged arm for ﬁlling. Tension spring prevents free spinning of roll. Holds one (two) standard 4-5/16" (110 mm) core roll(s) through 6" (152 mm) in diameter. 12-3/8" (314 mm) Single roll unit measures 6" W x 2¾" H x 4½" D.

2-3/4" (70 mm) Double roll unit measures 123⁄8" W x 2¾" H x 45⁄16" D.

9-7/8" (251 mm) BX MODEL 5061 Chrome-plated Zinc Single Roll*

MODEL 5071 Single Roll

1-3/4" BX MODEL 5241 Double Roll (44 mm) Controlled delivery. Die-cast aluminum with gray polystyrene spindle. Rotates ½ revolution for each dispensing operation 13" (330 mm) and returns to original position. Spring allows spindle to be released for ﬁlling. Holds one (two) standard core roll(s) through 5½" (140 mm) in diameter. Single roll unit measures 6½" W x 1¾" H x 4" D.

4-1/4" Double roll unit measures 13" W x 1¾" H x 4¼" D. (108 mm) BX –50 Non-controlled Delivery

THEFT-RESISTANT SPINDLE (-52)

Available as an option for Bradley surface-mounted and recessed toilet tissue holders.

Option 52 can be ordered as a replacement part: #S01-459.

44 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

MODEL 508* 7-1/2" (191 mm) Non-controlled delivery. Chrome-plated, cast brass with chrome- 2-5/8" (67 mm) 5-3/8" 2-5/8" plated plastic spindle. (137 mm) (67 mm) Unit measures 7½" W x 25⁄8" H x 3¼" D.

( ) 3-1/4" (83 mm) *Theft-resistant spindle available -52 .

BX MODEL 5084 Single Roll* 7-3/4" 3-5/8" (197 mm) (92 mm) BX MODEL 5234 Double Roll* Non-controlled delivery. Constructed of satin-ﬁnish stainless steel. Unit has individually mounted arms and free-turning roller that 2" (51 mm) telescopes for ﬁlling. Holds standard core rolls through 5½" 2" (51 mm) (140 mm) in diameter. Single roll unit measures 7¾" W x 2" H x 35⁄8" D. 3-7/8" 13" (330 mm) (98 mm) Double roll unit measures 13" W x 2" H x 37⁄8" D.

6-1/2" (165 mm) BX MODEL 5085 Unit with Bright Polish Finish. Single Roll*

BX MODEL 5235 Unit with Bright Polish Finish. Double Roll*

*Theft-resistant spindle available (-52). 2" (51 mm)

7-3/4" (197 mm) BX MODEL 508-32 Single Roll* 3-3/8" (86 mm) MODEL 523 2" Double Roll* (51 mm) Non-controlled delivery. Highly polished, chrome-ﬁnish Zamac brackets with plated-steel mounting bracket and chrome-plated plastic spindle. Single roll unit measures 7¾" W x 2" H x 33⁄8" D. 14" (356 mm) 6" 6" (152 mm) Double roll unit measures 14" W x 17⁄8" H x 3¼" D. (152 mm) 3-1/4" (83 mm) *Plastic Roller (-51) 508-32 only. 1-7/8" (48 mm) *Theft-resistant spindle available (-52).

3-3/4" (95 mm) BX MODEL 5106 Single Roll*

6-3/8" BX MODEL 5126 Double Roll* (162 mm) Surface-mounted, non-controlled delivery with hinged hood. 2" (51 mm) Fabricated of bright polished stainless steel and chrome-plated

6-3/8" plastic spindle. Free-turning rollers. Holds standard core rolls (162 mm) through 5½" (140 mm) in diameter.

2" Single roll unit measures 63⁄8" W x 63⁄8" H x 2" D. (51 mm) 3-3/4" (95 mm) Double roll unit measures 125⁄8" W x 63⁄8" H x 2" D. 6-3/8" 3-3/4" (162 mm) Theft-resistant spindle available (-52). (95 mm) *

12-5/8" (321 mm)

BRADLEY ACCESSORIES 45 TOILET TISSUE DISPENSERS

MODEL 5262 Single Roll

6" BX MODEL 5263 Double Roll (152 mm) 16" (406 mm) Toilet tissue dispenser with shelf. Non-controlled delivery. Fabricated of satin-ﬁnish stainless steel. Spindle(s) of ABS plastic with concealed spring. Standard core 6" (152 mm) diameter toilet tissue roll(s).

3-15/16" (100 mm) Single roll unit measures 16" W x 315⁄16" H x 6" D. Double roll unit measures 16" W x 315⁄16" H x 6" D.

6" (152 mm)

16" (406 mm)

3-15/16" (100 mm)

BX MODEL 5424 Surface-mounted, jumbo-roll, toilet tissue holder. Satin-ﬁnish stainless steel. Door swings down to replenish tissue roll and is secured with tumbler lock. Holds one roll (up to 10" (254 5" mm) diameter) of 1½" (38 mm) or 21⁄8" (54 mm) diameter (127 mm) 7" core toilet tissue minimum. Reﬁll indicator slot reveals 3-1/2" (178 mm) (89 mm) tissue level. 2" (51mm) Unit measures 1013⁄16" W x 1013⁄16" H x 4¾" D.

6" (152 mm)

BX MODEL 5425 Surface-mounted, dual-jumbo-roll, toilet tissue holder. Satin-ﬁnish stainless steel. Bottom hinged front panel is secured with tumbler lock. Holds two standard 9" (229 mm) 20-9/16" rolls. Core adapters accept 2¼" (57 mm) or 3" (76 mm) (522 mm) diameter core tissue minimum. Inside mechanism of durable 5-13/16" 4-7/16" (148 mm) (113 mm) ABS has sliding bottom access panel to allow dispensing from TYP. 7/16" one roll at a time. Non-controlled delivery. (11 mm) TYP. Unit measures 209⁄16" W x 113⁄8" H x 6 " D.

11-3/8" (289 mm)

SLIDING MECHANISM VIEWING SLOT

46 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

BX MODEL 5402

5" (127 mm) 5-9/16" (141 mm) Surface-mounted, dual-roll, toilet tissue holder. Satin-ﬁnish stainless steel. Vandal-resistant, polyethylene spindles. Bottom hinged front panel is secured with tumbler lock. Holds two standard rolls up to 4¾" (121 mm) in diameter, 4½" (114 mm) W. Non-controlled delivery.

10-3/8" Unit measures 59⁄16" W x 103⁄8" H x 5" D. 264 mm

RECESS-MOUNTED

MODEL 5104 Satin Finish* (shown)

6-3/8" Recess-mounted toilet tissue holder with non-controlled delivery. (162 mm) Recessed housing and projecting parts of satin ﬁnish stainless

6-3/8" steel. Free-turning, chrome-plated plastic roller telescopes for (162 mm) ﬁlling. Holds one standard core roll up to 5" (127 mm) in diameter.

MODEL 5102 Unit Housing and Projecting Parts of Bright Polished Stainless Steel* Rough wall opening 5¼" W x 5¼" H x 2" D. MODEL 510 Chrome-Plated Brass Unit* Rough wall opening 5¼" W x 5¼" H x 2" D. *Theft-resistant spindle available (-52).

6-5/16" (160 mm) MODEL 5103 Single Roll*

6-5/16" (160 mm) MODEL 5123 Double Roll* Recess-mounted toilet tissue holder with hinged hood and non-controlled delivery. Housing brackets and hood fabricated of bright polished stainless steel. Chrome-plated plastic spindle. Holds one (two) standard core roll(s) through ½ (4) MOUNTING HOLES 5 " (140 mm) in diameter. Single roll rough wall opening

2" 5" W x 47⁄8" H x 17⁄8" D. (51 mm) Double roll rough wall opening 11¾" W x 5¼" H x 2" D.

*Theft-resistant spindle available (-52). 6-3/8" 12-3/4" (162 mm) (324 mm)

MODEL 5105*

2-5/8" Recess-mounted toilet tissue holder with non-controlled (67 mm) delivery. Housing fabricated of bright polished stainless steel. Posts are fabricated of chrome-plated zinc. Spindle fabricated of chrome-plated plastic. Holds one standard core toilet tissue roll through 5" (127 mm) in diameter, plus one spare roll behind spindled roll. 6-3/8" (162 mm) Rough wall opening 5¼" W x 5¼" H x 4" D. 6-3/8" (162 mm) *Theft-resistant spindle available (-52).

BRADLEY ACCESSORIES 47 TOILET TISSUE DISPENSERS

(4) MOUNTING HOLES MODEL 5124*

6-1/4" Recess-mounted, dual-roll, toilet tissue holder with non-controlled (159 mm) 2" (51 mm) delivery. Satin-ﬁnish stainless steel. Chrome-plated, zinc die-cast projecting parts. Free-turning, chrome-plated plastic rollers. Holds two standard core rolls through 5" (127 mm) in diameter.

MODEL 5125 Unit with Bright Polish Finish* 12-1/2" (318 mm) Rough wall opening 11¾" W x 5¼" H x 2" D.

*Theft-resistant spindle available (-52).

5-1/2" (140 mm) BX MODEL 5127 Recess-mounted, dual roll, non-controlled delivery with hinged hood toilet tissue holder. Fabricated of bright polished 12-1/4" (311 mm) stainless steel and chrome-plated plastic spindle. Free-turning rollers. Holds standard core through 5½" (140 mm) diameter. 11-1/4" (286 mm) Unit measures 6½" W x 12¼" H x 3" D. Rough wall opening 6" W x 11¾" H x 3¼" D. 6-1/2" (165 mm) 3" (76 mm)

3-1/8" (79 mm)

5" (127 mm) MODEL 515

1-9/16" (40 mm) Dispenses sheet tissue. Satin-ﬁnish stainless steel. Front panel hinged at bottom. Vandal-resistant lock.

8" (203 mm) Unit measures 5" W x 8" H x 3" D.

5-1/2" (140 mm) 2-7/16" (62 mm) 3" (76 mm)

5-5/16" 5-5/8" (135 mm) BX MODEL 5412 (143 mm) Recess-mounted, dual-roll, toilet tissue holder. Satin-finish stainless steel. Vandal-resistant polyethylene spindles. Bottom hinged front panel is secured with tumbler lock. Holds two standard rolls up to 4¾" (121 mm) in diameter, 4½" (114 mm) 10-3/8" (264 mm) W. Non-controlled delivery. With flange, unit measures 75⁄8" W x 123⁄8" H x 55⁄16" D. Without flange, unit measures 55⁄8" W x 103⁄8" H x 55⁄16" D. ¾ ½ 3/16" Rough wall opening 5 " W x 10 " H x 4" D. (5 mm)

6-1/4" MODEL 5422 (156 mm) BX Partition-mounted, dual-roll, toilet tissue holder. Serves 10-3/8" two adjoining compartments. Satin-finish stainless steel. (264 mm) Vandal-resistant polyethylene spindles. Bottom hinged front panel is secured with tumbler lock. Holds two standard rolls up to 4¾" (121 mm) in diameter, 4½" (114 mm) W. Non- controlled delivery. Adj. 1/2" to 2" (13 mm to 51 mm) 11" (279 mm) With flange, unit measures 13" W x 123⁄8" H x 523⁄32" D. 1" Typ. (25 mm) Without flange, unit measures 11" W x 103⁄8" H x 53⁄32" D. Partition opening 113⁄8" W x 105⁄8" H.

48 BRADLEY ACCESSORIES BX icon indicates BradEX ® TOILET TISSUE DISPENSERS COMBINATION UNITS

Bradley Seat Cover Dispenser/Combination units are fabricated of 18-gauge stainless steel and are secured with full-length piano hinges and tumbler locks for the ultimate blend of style and vandal resistance. When doors are locked, contents and interior areas are hidden and protected. Partition-mounted units serve two compartments at the same time.

BX MODEL 591 17-1/8" (435 mm) Partition-mounted combination unit serves two compartments. Dispenses 1,000 standard single or half-fold paper toilet seat Seat Cover Dispenser covers. Holds four standard core rolls through 5¼" (133 mm) in diameter. Waste receptacle capacity 0.88 gal (3.3 L). Non- Napkin 30-5/8" Disposal controlled delivery. (778 mm) Toilet Tissue Spindle (4) ½ 7⁄8 Removable Partition opening 15 " W x 28 " H. Waste Container

15-1/8" 1" (25 mm) (384 mm) Typ.

17-1/8" (435 mm) MODEL 5911 Partition-mounted combination unit serves two compartments. Seat Cover Dispenser Mounts with one side ﬂush against partition allowing clearance for grab bar in barrier-free compartment. Waste receptacle Grab Bar capacity 0.88 gal (3.3 L). Holds four standard core rolls through 30-5/8" Napkin (Not Furnished) (778 mm) Disposal 5¼" (133 mm) in diameter. Non-controlled delivery. Servicing Toilet Tissue Spindle (4) of unit accomplished from non-barrier-free compartment. Removable Waste Container Partition opening 15½" W x 287⁄8" H. 15-1/8" 1" (25 mm) (384 mm) Typ. –69 Reverse Door Option

17-1/8" (435 mm) BX MODEL 5912

Seat Cover Recess-mounted combination unit. Dispenses 1,000 standard Dispenser single or half-fold paper toilet seat covers. Holds two standard ¼ Grab Bar core rolls through 5 " (133 mm) in diameter. Non-controlled 30-5/8" Napkin (Not Furnished) (778 mm) Disposal delivery. Waste receptacle capacity 1 gal (3.8 L). Toilet Tissue Spindle (2) Removable Rough wall opening 15½" W x 287⁄8" H x 4" D. Waste Container –10 Semi-Recessed Projects 1¼" (32 mm) from wall. Not for use with 15-1/8" 1" (25 mm) grab bar. (384 mm) Typ. –11 Surface-Mounted Projects 4¼" (108 mm) from wall. Not for use with grab bar.

–69 Reverse Door Option

17-1/8" (435 mm) MODEL 592 Partition-mounted combination unit serves two compartments. Seat Cover Dispenser Dispenses 1,000 standard single or half-fold paper toilet seat covers. Holds four standard core rolls through 5¼" (133 mm)

30-5/8" in diameter. Non-controlled delivery. (778 mm) Toilet Tissue Spindle (4) Partition opening 15½" W x 287⁄8" H.

15-1/8" 1" (25 mm) (384 mm) Typ.

BRADLEY ACCESSORIES 49 TOILET TISSUE DISPENSERS COMBINATION UNITS

17-1/8" (435 mm) MODEL 5921 Partition-mounted combination unit serves two compartments. Seat Cover Dispenser Mounts with one side ﬂush against partition allowing clearance for grab bar in barrier-free compartment. Holds four standard Grab Bar ¼ 30-5/8" (Not Furnished) core rolls through 5 " (133 mm) in diameter. Servicing of (778 mm) unit accomplished from non-grab-bar compartment. Non- Toilet Tissue Spindle controlled delivery. Partition opening 15½" W x 287⁄8" H. 15-1/8" 1" (25 mm) (384 mm) Typ. –69 Reverse Door Option

17-1/8" (435 mm) BX MODEL 5922 Recess mounted. Dispenses 1,000 standard single or half-fold Seat Cover Dispenser paper toilet seat covers. Holds two standard core rolls through 5¼" (133 mm) in diameter. Non-controlled delivery. Grab Bar 30-5/8" (Not Furnished) ½ 7⁄8 (778 mm) Rough wall opening 15 " W x 28 " H x 4" D. Toilet Tissue Spindle (2) –10 Semi-Recessed 2 1⁄8" (54 mm) in wall, projects 2" (51 mm) from wall. Not for use with grab bar. –11 Surface-Mounted Projects 4¼" (108 mm) from wall. 15-1/8" 1" (25 mm) Not for use with grab bar. (384 mm) Typ. –69 Reverse Door Option

17-1/8" (435 mm) MODEL 5932

Seat Cover Recess-mounted combination unit. Dispenses 1,000 standard Dispenser single or half-fold paper toilet seat covers. Waste receptacle capacity 1.7 gal (6.4 L). Grab Bar (Not Furnished) 30-5/8" Waste Rough wall opening 15½" W x 287⁄8" H x 4" D. (778 mm) Receptacle –10 Removable Semi-Recessed Waste Container –11 Surface-Mounted

15-1/8" 1" (25 mm) (384 mm) Typ.

17-1/8" (435 mm) MODEL 594 Partition-mounted combination unit serves two compartments. Napkin Disposal Toilet Tissue Dispenses four standard core rolls through 5¼" (133 mm) in 20" Spindle (4) (508 mm) diameter, two rolls per compartment. Non-controlled delivery. Removable Waste Waste receptacle capacity 1 gal (3.8 L). Container ½ ¼ 15-1/8" 1" (25 mm) Partition opening 15 " W x 18 " H. (384 mm) Typ.

50 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

MODEL 5941 Partition-mounted combination unit shall include toilet tissue 1" (25mm) Typ. dispenser, and napkin disposal, and be fabricated of, heavy

5" gauge stainless steel with seamless exposed surfaces in satin (127mm) Dim. "A" to finished Mounting floor finish. Door and back panel shall be 18 gauge. Door shall have Holes Napkin Disposal piano hinge and tumbler lock. 20" 9" (778mm) Toilet (229mm) Tissue Overall dimensions: 171⁄8" W x 20" H x 4½" D. Spindle (qty. 4) Removable Waste Container 3¾" 6" (96mm) (152mm)

4¼" Adjustable (108mm) 15¹⁄₈" (384mm)

½" 16¹⁄₈" (13mm) (410mm) 17¹⁄₈" (435mm)

17-1/8" MODEL 5942 (435 mm) Recess-mounted combination unit. Dispenses two standard core rolls through 5¼" (133 mm) in diameter. Non-controlled delivery. Napkin disposal has self-closing, push-ﬂap door. Napkin Disposal Toilet Tissue Waste receptacle capacity 1 gal (3.8 L). 20" Spindle (2) (508 mm) Rough wall opening 153⁄8" W x 18¼" H x 4¼" D. Removable Waste –10 ¼ ¼ Container Semi-Recessed 3 " (83 mm) in wall, projects 1 " (32 mm) from wall.

15-1/8" 1" (25 mm) –11 Surface-Mounted Projects 4½" (108 mm) from wall. (384 mm) Typ. –69 Reverse Door Option

MODEL 5951 Recessed combination unit shall include dual jumbo coreless toilet tissue dispenser and napkin disposal, and be fabricated of stainless steel with seamless exposed surfaces in satin ﬁnish. Doors shall be 18 gauge, 304 stainless steel, with piano hinge and tumbler lock. 1" Typ. (25) Overall dimensions: 34¾" W x 20½" H x 6¼" D.

7⁵⁄₈" (194) MODEL 5952 Right hand conﬁguration.

20½" (521)

22" (559) 34¾" (883)

Front View

BRADLEY ACCESSORIES 51 SEAT COVER DISPENSERS

17-5/8" DIPLOMAT SERIES (448 mm) BX MODEL 5A40-11 13-1/2" (343 mm) Designed with unique dual-curve geometry. Constructed of

12-1/16" architectural satin ﬁnish stainless steel. Surface-mounted (306 mm) 9-5/16" seat cover dispenser. Dispenses 250 standard single or half-fold (237 mm) 6-5/16" paper toilet seat covers. (160 mm) Unit measures 175⁄8" W x 121⁄16" H x 1¾" D.

MODEL 582 Partition-mounted seat cover dispenser serves two 2" (51 mm) 10-3/4" (273 mm) compartments. Dispenses 1,000 single-fold or half-fold 12-3/4" (324 mm) paper seat covers. 8-3/4" (222 mm) 15-1/8" (384 mm) Partition opening 11" H x 153⁄8" W.

17-1/8" (435 mm) 4-5/8" (17 mm) 3/4" (91 mm) Min. 1-5/8" (41 mm) Max. PARTION THICKNESS

BX MODEL 583 Surface-mounted seat cover dispenser. Dispenses 500 standard single or half-fold paper toilet seat covers. Does not lock. 11" (279 mm) Unit measures 15" W x 11½" H x 23⁄8" D.

BX MODEL 5831 (shown) 15-3/4" (400 mm) Unit dispenses 250 toilet seat covers. 2" Unit measures 15¾" W x 11" H x 2" D. (51 mm)

MODEL 584 15-1/4" (387 mm) 12-3/4" (324 mm) Recess-mounted seat cover dispenser. Dispenses 500 standard single or half-fold paper toilet seat covers.

10-7/8" ¾ 3⁄8 ¾ (276 mm) Rough wall opening 15 " W x 11 " H x 2 " D.

17-1/8" (435 mm) 2-3/4" (70 mm)

BX MODEL 5847 CONTEMPORARY SERIES

2-1/2" 1-3/4" (64 mm) (44 mm) Recess-mounted, seat cover dispenser. Dispenses 500 standard

15-1/8" 2-1/2" single or half-fold toilet seat covers. (384 mm) (64 mm) 13" (330 mm) Rough wall opening 155⁄8" W x 11¼" H x 2¾" D. 8-7/8" (225 mm)

10-3/4" (273 mm)

17-3/8" (441 mm) 3-1/4" (83 mm)

52 BRADLEY ACCESSORIES BX icon indicates BradEX ® NAPKIN DISPOSALS BRADLEYCORP.COM

12-5/16" BX MODEL 4A00 DIPLOMAT SERIES (313 mm) Designed with unique dual-curve geometry. Constructed of 14-13/16" (376 mm) architectural satin ﬁnish stainless steel. 1.5 gal (5.7 L), recess- mounted napkin disposal with push-ﬂap door. Removable plastic disposal. 8-1/16" (205 mm) Rough wall opening 11¼" W x 13¾" H x 4" D. –10 Semi-Recessed 2" (51 mm) in wall, projects 3¾" (95 mm) from wall.

8" (203 mm) BX MODEL 4A10-11 DIPLOMAT SERIES Designed with unique dual-curve geometry. Constructed of architectural satin ﬁnish stainless steel. 1.5 gal (5.7 L), surface-

10-1/16" mounted napkin disposal with hinged cover. Accepts all (256 mm) after-market industry liners. Unit measures 8" W x 101⁄16" H x 37⁄8" D.

12-5/16" DIPLOMAT SERIES (313 mm) MODEL 4A11 Designed with unique dual-curve geometry. Constructed of 14-13/16" (376 mm) architectural satin ﬁnish stainless steel. Mounts in partition to serve two compartments. 1.5 gal (5.7 L) napkin disposal with

8-1/16" self-closing push-ﬂap door. Removable plastic disposal. (205 mm) Rough wall opening 11¼" W x 13¾" H.

12-3/4" BX MODEL 4721-15 (324 mm) Mounts in partition to serve two compartments. Two push-ﬂap doors and stainless steel waste receptacle removable from 15-1/8" (384 mm) one side. Flange adjusts for partitions from ½" (13 mm) to 1¼" (32 mm) thick. Uses disposable, wet-strength paper 17-1/8" (435 mm) liner. 1.5 gal (5.7 L) capacity. Partition opening 11" W x 153⁄8" H.

Note: If used with an odd number of compartments, use 10-3/4" (273 mm) one Model 4722-15 in side wall of end compartment.

12-3/4" MODEL 4722-1015 (324 mm) Semi-recessed napkin disposal unit with push-ﬂap door and removable, stainless steel receptacle. Uses disposable, 15-1/8" wet-strength paper liner. (384 mm)

17-1/8" Rough wall opening 11" W x 153⁄8" H x 2½" D. (435 mm) Unit projects 17⁄16" (37 mm) from ﬁnished wall.

2-9/16" 10-3/4" (65 mm) (273 mm)

4" (102 mm)

BRADLEY ACCESSORIES 53 NAPKIN DISPOSALS

BX MODEL 4722-15 Surface-mounted napkin disposal unit with push-ﬂap door and removable, stainless steel receptacle. Uses disposable, 15-1/8" wet-strength paper liner. (384 mm) Measures 10¾" W x 151⁄8" H x 4" D.

10-3/4" (273 mm) 4" (102 mm)

10-7/8" (276 mm) BX MODEL 4731-15 Recess-mounted napkin disposal unit with push-ﬂap door and

5-1/2" 17-1/8" removable, stainless steel receptacle. Uses disposable, wet- (140 mm) (435 mm) strength paper liner. May also be used as a small-capacity 15-1/8" (384 mm) waste receptacle.

5-1/2" 3⁄8 3⁄8 (140 mm) Rough wall opening 11 " W x 15 " H x 4" D. Unit projects 17⁄16" (37 mm) from ﬁnished wall. 2" (51 mm) 12-3/4" (324 mm) 4" (102 mm)

10-7/8" CONTEMPORARY SERIES (276 mm) MODEL 4737

17-3/8" Recess-mounted napkin disposal with push-ﬂap door. 3-1/2" (441 mm) (89 mm) Removable, leak-proof, molded-plastic insert. 15-1/4" (387 mm) 1-7/8" Rough wall opening 113⁄8" W x 15¾" H x 4" D. (48 mm) –10 Semi-Recessed 21⁄8" (54 mm) in wall, projects 2" (51 mm) from wall. 3-1/2" (89 mm) –11 Surface-Mounted Projects 41⁄8" (105 mm) from wall. 13" (330 mm) Note: Only recessed and semi-recessed. 4-1/8" (105 mm) 1/2" (13 mm)

8" (203 mm) BX MODEL 4781-15 Surface-mounted napkin disposal unit has hinged cover and bottom with lock. Uses disposable, wet-strength paper liner. 11-1/2" (292 mm) Unit measures 8" W x 11½" H x 41⁄8" D.

4-1/8" (105 mm)

4-1/8" (105 mm) MODEL 4791-15 8" (203 mm) Surface-mounted napkin disposal with integral shelf has hinged

8" (203 mm) cover and bottom with tumbler lock. Shelf welded to waste

11-1/4" receptacle. Uses disposable, wet-strength paper liner. (286 mm) Unit measures 16" W x 11¼" H x 41⁄8" D.

8" (203 mm)

4-1/8" (105 mm) 54 BRADLEY ACCESSORIES BX icon indicates BradEX ® NAPKIN VENDORS BRADLEYCORP.COM

All Bradley dispensers combine smooth, contemporary styling with durable, vandal-resistant construction. Doors feature full-length piano hinges and tumbler locks for added security and maintenance ease. Configurations range from semi-recessed and recessed to surface-mounted and partition-mounted models.

RECESSED AND SEMI-RECESSED

17" (432 mm) MODEL 4A20 DIPLOMAT SERIES Designed with unique dual-curve geometry. Constructed of architectural satin ﬁnish stainless steel. Recess-mounted 28-13/16" 21" (732 mm) (533 mm) napkin/tampon vendor. Dispenses 18 napkins and 28 tampons. Specify coin choice (Free, 10¢, 25¢, 50¢, $1.00 and Euro). Rough wall opening 161⁄8" W x 277⁄8" H x 4" D. –11 Surface-Mounted Projects 5¾" (146 mm) from wall. –45 25¢ Coin Operation

6-1/2" 11-7/8" (165 mm) (302 mm) MODEL 401 Recessed napkin/tampon vendor. Dispenses 30 napkins and 28 25-7/8" 27-15/16" tampons. Slip-type ﬂange permits full or partial recess installation (657 mm) (710 mm) or can be discarded for surface mounting. Coin mechanism may be replaced in the ﬁeld without removing cabinet from wall. Specify coin choice (Free, 10¢, 25¢, 50¢, $1.00). Rough wall opening 12½" W x 263⁄8" H x 6" D. 5-3/4" (146 mm) BX –45 25¢ Coin Operation 13-15/16" (354 mm)

6-1/2" CONTEMPORARY SERIES 11-7/8" (165 mm) MODEL 4017 (302 mm) Recessed napkin/tampon vendor. Dispenses 30 napkins and 28

25-7/8" 27-15/16" tampons. Full-length piano hinge and two tumbler locks. Coin (657 mm) (710 mm) mechanism may be replaced in the ﬁeld without removing cabinet from wall. Specify coin choice (Free, 10¢, 25¢, 50¢, $1.00). Rough wall opening 12½" W x 263⁄8" H x 6½" D.

6-3/4" –10 Semi-Recessed 4" (102 mm) in wall, projects 2" (51 mm) from wall. (171 mm) –11 Surface-Mounted Projects 6¾" (171 mm) from wall. 14-1/8" (359 mm) 5/16" (8 mm)

MODEL 407 CONTEMPORARY SERIES 1/2" (13 mm) Recessed napkin/tampon vendor. Dispenses 18 napkins and 28 tampons. Shallow design permits unit to be fully recessed 29-1/8" (740 mm) in a standard 4" (102 mm) deep wall. Coin mechanism may be replaced in the ﬁeld without removing cabinet from wall. Specify coin choice (Free, 10¢, 25¢, 50¢, $1.00). Rough wall opening 161⁄8" W x 277⁄8" H x 4" D.

7-1/2" –11 Surface-Mounted Projects 43⁄8" (111 mm) from wall. (191 mm) BX –45 25¢ Coin Operation 17-3/16" (437 mm) BX –1145 Surface-Mounted with 25¢ Coin Operation

BRADLEY ACCESSORIES 55 BABY CHANGING STATIONS

BX MODEL 961 Surface-mounted, folding, high-density polyethylene unit. Full- length steel hinge mechanism. Molded-in liner dispensers and bag hooks. Attractive gray/white/black granite color. Requires less than 5 lb (2.3 Kg) of pull force to open.

BX MODEL 9611 Solid Light Gray Color BX MODEL 9612 Ivory Color

24" 19-3/4" (610 mm) (502 mm) 16" 4" (406 mm) (102 mm)

9-1/8" 6-5/8" (232 mm) (168 mm)

36" 33-1/2" (851 mm) (914 mm) 25" (635 mm) 31" (787 mm)

BX MODEL 962 Recess-mounted unit with polyethylene body and barrier-free design. Brushed stainless steel exterior. Standard with molded, dual-liner dispenser (holds approximately 50 per dispenser). Safety belt with cam-buckle is adjustable with one hand. Pneumatic gas shock mechanism ensures smooth, safe open and close motions. Rated to support static load of 250 lb (113.4 Kg). BX MODEL 962-11 Surface-Mounted

1" (25mm)

4-5/8" (117 mm)

36-3/4" (933 mm) 21" (533 mm)

13-1/4" (337 mm)

4-5/8" (117 mm)

56 BRADLEY ACCESSORIES BX icon indicates BradEX ® SHOWER PRODUCTS SEATS BRADLEYCORP.COM

MODEL 954 Hinged corner shower seat. Heavy-duty, satin-ﬁnish, stainless steel with 3/4" (19 mm) return edges. Folds to vertical position when not in use.

4" 4" TOP OF SEAT (102 mm) (102 mm) LOCATIONS OF MODEL 9541 Fixed Corner Shower Seat MOUNTING SCREWS

3/8" 3/8" (10 mm) (10 mm) 8" 8" (203 mm) (203 mm)

12" (305 mm) 12" (305 mm)

BX MODEL 9562 Folding, phenolic shower seat. Stainless steel tubing with stainless steel wall bracket and piano hinges. Seat of ½" (13 mm) solid phenolic. Folds to vertical position when not in 28-1/2" (724 mm) use. Designed to support up to 400 lb (181.4 Kg) static load.

14-1/4" (362 mm)

15" (381 mm) 5-1/4" (133 mm) 27-3/8" to 30-3/8” 2-1/4" (696 mm to 772 mm) (57 mm) 1-3/8" 7/8" 1-3/4" (35 mm) (22 mm) (45 mm) 1-1/4" 2-1/2" (32 mm) (64 mm) 10-1/4" (260 mm) 7-5/8"

4-3/4" (121 mm) 17" to 20” (432 mm to 508 mm)

BX MODEL 9569 Frame fabricated with satin-finish, stainless steel, 16-gauge U-channel and 18-gauge 1" (25 mm) diameter tubing. Seat constructed of ½" (13 mm) thick solid phenolic with white matte melamine finish. Reversible in field to be right or left. Barrier-free design. For color options, please see website. When properly installed, designed to support up to 250 lb 113.4 Kg) static load. 34-1/2" (876 mm) Reversible – Accommodates Right or Left Hand Configuration 17-1/4" (438 mm) 13-1/2" (343 mm)

34-3/8" to 37-3/8" (873 to 949 mm)

27-3/8" to 30-3/8" (695 to 772 mm) 7/8" 1-3/4" (22 mm) (44 mm) 2-1/2" 1-1/4" (64 mm) (32 mm)

10-9/16" (268 mm)

BRADLEY ACCESSORIES 57 SHOWER PRODUCTS SEATS

BX MODEL 9591 Folding, phenolic shower seat. Stainless steel tubing with stainless steel wall bracket and piano hinges. Seat of ½" (13 mm) solid phenolic. Folds to vertical position when not in use. Designed to support up to 250 lb (113.4 Kg) static load.

BX MODEL 9592 Folding, Bradmar™ solid plastic shower seat. Stainless steel tubing with stainless steel wall bracket and piano hinges. Seat of 1" (25 mm) thick high-density polyethylene. All exposed edges are machined smooth. Square conﬁguration. Folds to vertical position when not in use. Designed to support up to 250 lb (113.4 Kg) static load. Color: Linen cobblestone with textured ﬁnish.

58 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

BX MODEL 9593 Folding, Bradmar™ solid plastic shower seat. Stainless steel tubing with stainless steel wall bracket and piano hinges. Seat of 1" (25 mm) thick high-density polyethylene. All exposed edges are machined smooth. Square conﬁguration. Folds to vertical position when not in use. Designed to support up to 400 lb (181.4 Kg) static load. Color: Linen cobblestone with textured ﬁnish.

BX MODEL 9594 Folding, Bradmar™ solid plastic shower seat. Stainless steel tubing with stainless steel wall bracket and piano hinges. Seat of 1" (25 mm) thick high-density polyethylene. All exposed edges are machined smooth. Square conﬁguration. Folds to vertical position when not in use. Designed to support up to 250 lb (113.4 Kg) static load. Color: Linen cobblestone with textured ﬁnish. Reversible – Accommodates Right or Left Hand Configuration

BRADLEY ACCESSORIES 59 SHOWER PRODUCTS SEATS

MODEL 957 Bariatric Shower Seat Folding bariatric shower seat with left hand conﬁguration and barrier-free design. Frame fabricated of stainless steel tubing, 1¼" (32 mm) x 18-gauge square main frame with 1" (25 mm) x 18-gauge round cross members. Seat of ½" (13 mm) thick solid phenolic with white matte melamine ﬁnish. When properly installed, designed to support at least 900 lb (408.2 Kg).

MODEL 9571 Right Hand Configuration

32" (813 mm) 13-1/2" (343 mm)

21" 13-1/2" (533 mm) (343 mm)

Floating Fixed Flange Flange

20" (508 mm)

MODEL 958 Bariatric Bench Shower Seat Folding bariatric shower seat with barrier-free design. Frame fabricated of stainless steel tubing, 1¼" (32 mm) x 18-gauge square main frame with 1" (25 mm) x 18-gauge round cross members. Seat of ½" (13 mm) thick solid phenolic with white matte melamine ﬁnish. When properly installed, designed to support at least 900 lb (408.2 Kg).

32" (813 mm)

13-1/2" (343 mm)

20" (508 mm)

60 BRADLEY ACCESSORIES BX icon indicates BradEX ® SHOWER PRODUCTS CURTAINS, HOOKS & RODS BRADLEYCORP.COM

SHOWER CURTAINS

BX MODEL 9533 Vinyl shower curtain. Fabricated of 6-gauge vinyl material. Hemmed edges and heat-sealed grommets on 6" (152 mm) centers. White is standard. SIZES (9533) BX 36" x 72" (914 x 1829 mm) BX 42" x 72" (1067 x 1829 mm) BX 72" x 72" (1829 x 1829 mm)

MODEL 9534 Duck shower curtain. Fabricated of 100% cotton duck material with hemmed top edges and chrome-plated nickel grommets on 6" (152 mm) centers. White only.

MODEL 9535 Antimicrobial shower curtain. Fabricated of 10 oz (10 mil), nylon- reinforced, antimicrobial, 8-gauge vinyl material. Flame resistant and self deodorizing with rust-proof grommet on 6" (152 mm) centers. All sides hemmed. Green is standard.

BX MODEL 9537 Same as Model 9535 shower curtain in white. SIZES (9537)

BX 42" x 72" (1067 x 1829 mm) BX 48" x 72" (1219 x 1829 mm) BX 72" x 72" (1829 x 1829 mm)

1-11/16" (43 mm) BX MODEL 9536 Shower curtain hook. Fabricated of stainless steel spring.

3-1/8" (79 mm)

BX MODEL 9540 Shower curtain hook with rollers. Fabricated of stainless steel wire with snap fastener. See technical data from website.

BRADLEY ACCESSORIES 61 SHOWER PRODUCTS CURTAINS, HOOKS & RODS

BX MODEL 9530-60 MODEL 9530-72 Shower curtain rod fabricated of stainless steel, seamless construction with exposed surfaces in architectural satin ﬁnish. Accommodates 60" (1524 mm) shower stall increasing space in shower stall.

–78 Bright Polished Finish

60" (1524 mm)

6-5/8" (169 mm)

72" (1829 mm)

6-5/8" (169 mm)

SHOWER RODS – EXPOSED MOUNTING

BX MODEL 9531 Heavy-duty shower curtain rod with exposed mounting. Rod of 18-gauge, satin-ﬁnish stainless steel; 1¼" (32 mm) O.D. Flanges of 22-gauge,satin-ﬁnish stainless steel; 3" O.D (76 mm). For lengths 72" (1829 mm) and greater, model 9522 is required. Must specify distance from ceiling.

MODEL 9531-4 Bright Finish 3" DIA. (76 mm) For lengths 72" (1829 mm) and greater, model 9522 is required. Must specify distance from ceiling.

SIZES BX 36," 42," 48" and 60" LENGTH (914 mm, 1067 mm, 1219 mm and 1524 mm) BX MODEL 953 Shower curtain rod of satin-ﬁnish stainless steel; 1" (25 mm) 2-1/4" (57 mm) O.D. For rods over 72" (1829 mm) and L shaped, specify model 9531 or 9539.

MODEL 953-4 Bright Finish BX SIZES 36" and 60" (914 and 1524 mm)

62 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

SHOWER RODS – CONCEALED MOUNTING

BX MODEL 9539 Heavy-duty shower curtain rod with concealed mounting. Fabricated of satin-finish stainless steel; 1¼" (32 mm) O.D. Flanges 33⁄16" (81 mm) O.D. Escutcheons snap over flanges to 3-3/16" provide concealed mounting. For lengths 72" (1829 mm) and (81 mm) greater, model 9522 is required. Must specify distance from ceiling. MODEL 9539-4 Bright Finish LENGTH For lengths 72" (1829 mm) and greater, model 9522 is required. Must specify distance from ceiling. 3-1/8" DIA. (79 mm) BX SIZES 36" and 60" (914 and 1524 mm) BX 2-3/8" (60 mm) MODEL 9538 Shower curtain rod of satin-finish stainless steel; 1" (25 mm) O.D. For rods over 72" (1829 mm) and L shaped, specify model 9531 or 9539.

MODEL 9538-4 Bright Finish BX SIZES 36" and 60" (914 and 1524 mm)

1-9/16" (40 mm) MODEL 9522* (2) MOUNTING HOLES Shower rod ceiling support. For 1¼" (32 mm) O.D. shower curtain rod. Chrome-plated brass bracket, stainless steel rod

2-3/16" (56 mm) and collar. DIA.

* Required for shower rod 72" (1829 mm) and greater.

1/4" (6 mm) DIA. ROD Must specify distance from ceiling. STANDARD 6" (152 mm)

1-1/4" (32 mm) DIA.

BRADLEY ACCESSORIES 63 SECURITY ACCESSORIES

You can rely on Bradley for a complete line of durable Security Fixtures for penal institutions and detention facilities. Our broad-based accessory line ranges from bookshelves and clothes hooks to soap dishes and tissue holders. All are fabricated of heavy-duty stainless steel.

CLOTHES HOOKS

5" (127 mm) MODEL SA30 Chase-Mounted

MODEL SA31 Front-Mounted (shown) Security towel hook fabricated of heavy-duty stainless steel with 2-1/2" 5" (64 mm) (127 mm) exposed surfaces in architectural satin ﬁnish. One-piece formed and ground smooth. 1-1/2" (38 mm) Unit measures 5" W x 5" H. Projects 15⁄16" (33 mm) from wall. 1-1/2" 2-1/2" (38 mm) (64 mm)

MODEL SA32 Chase-Mounted

MODEL SA33 Front-Mounted (shown) Security towel hook strip fabricated of heavy-duty stainless steel with exposed surfaces in architectural satin ﬁnish. All seams are welded and ground smooth.

18" (457 mm) Unit measures 18" W x 5½" H. Projects 15⁄16" (33 mm) from wall.

2-1/2" 5-1/2" (64 mm) (140 mm)

1-1/2" 7-1/2" 7-1/2" 1-1/2" (38 mm) (191 mm) (191 mm) (38 mm)

MODEL SA35 Chase-Mounted

BX MODEL SA36 Front-Mounted Security towel hook backplate fabricated of heavy-duty 4" (102 mm) stainless steel in architectural satin ﬁnish. Safety hook of stainless steel with pivoting ball joint that releases when SA35 excessive force is applied.

4" Unit measures 4" W x 4" H. (102 mm) Projects 2¼" (57 mm) from wall.

3/4" (19 mm)

SA36

64 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

BX MODEL SA37 Front-Mounted 1" (25 mm) Safety clothes hook. Bracket is fabricated of heavy-duty stainless

1/2" (13 mm) steel with stainless steel hook. Hook trips into down position when excessive loading is applied. Tension can be adjusted by special torx driver. 4-5/16" (110 mm) Unit measures 1" W x 45⁄16" H. 3-9/16" (90 mm) Projects 3" (76 mm) from wall.

3/8" (10 mm)

MODEL SA38 Chase-Mounted

MODEL SA39 Front-Mounted (shown) Security clothes hook strip. Bracket is fabricated of heavy-duty stainless steel with stainless steel hook. Hook trips into down position when excessive loading is applied. Unit measures 18" W x 5½" H. Projects 3" (76 mm) from wall.

18" (457 mm)

5-1/2" (140 mm)

MODEL SA41 Security towel hook strip fabricated of heavy-duty stainless steel with exposed surfaces in architectural satin ﬁnish. All seams are welded and ground smooth. Safety hooks with pivoting ball joints that release when excessive force is applied. Unit measures 18" W x 61⁄16" H x 2¼" D.

18" (457 mm)

6-1/16" (154 mm)

BRADLEY ACCESSORIES 65 SECURITY ACCESSORIES

GRAB BAR

BX MODEL SA70 Heavy-duty stainless steel tubing 1½" (38 mm) O.D. with welded stainless steel mounting ﬂanges. Meets or exceeds the requirements of ANSI Standard A117.1, the ADA and ABA Accessibility Guidelines for Buildings and Facilities (ADAAG) and the Uniform Federal Accessibility Standard (UFAS). Exposed front mounting with torx-head screws with welded stainless steel closure plate.

BOOKSHELVES

MODEL SA47 Chase-Mounted Chase mounted, recessed shelf is fabricated of heavy-duty stainless steel with exposed surfaces in satin finish. Threaded studs are provided for rear mounting to specified wall thickness. 18" (457 mm) Unit measures 16" W x 5" H x 4" D with 18" x 7" flange.

7" 5" (178 mm) (127 mm)

16" (406 mm)

MODEL SA49 Chase-Mounted Security, recessed shelf fabricated of heavy-duty stainless steel with exposed surfaces in architectural satin ﬁnish. All welds are ground smooth with polished corners and burr-free edges. Back of shelf has welded anchor nuts to receive threaded studs (provided). Unit measures 16" W x 29⁄16" H. Projects 4" (102 mm) from wall. 1/2" (13 mm)

7" (178 mm) 7" (178 mm)

66 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

MODEL SA50 Chase-Mounted Chase mounted, security shelf with toothbrush slots. Fabricated of heavy-duty stainless steel in architectural satin ﬁnish. Four slots for toothbrushes. Threaded studs are provided for rear mounting to speciﬁed wall thickness. Unit measures 18" W x 29⁄16" H. Projects 4" (102 mm) from wall.

7/8" (22 mm) DIA. WALL OPENING REQUIRED (3)

1" (25 mm) 4" (102 mm)

1/2" (13 mm) 2-9/16" (65 mm) 7" (178 mm) 7" (178 mm)

MODEL SA51 Chase-Mounted (shown)

MODEL SA52 Front-Mounted Security bookshelf with clothes hooks fabricated of heavy-duty stainless steel with exposed surfaces in architectural satin ﬁnish. All seams are welded and ground smooth. Shelf interior is glass blasted to a uniform ﬁnish. Safety hooks fabricated of bright, chrome-plated brass housing with stainless steel ball and spring. Friction mechanism releases when excessive force is applied. 8-5/16" (211 mm) Unit measures 18" W x 11" H. Projects 85⁄16" (211 mm) from wall. 11" (279 mm) 8" (203 mm)

1-1/2" 1-5/16" 7-1/2" 7-1/2" (38 mm) (33 mm) 1-1/2" (191 mm) (191 mm) (38 mm)

MODEL SA53 Chase-Mounted (shown)

MODEL SA54 Front-Mounted Security bookshelf with clothes hooks. Shelf and backplate are fabricated of heavy-duty stainless steel with architectural satin finish. Shelf interior is glass-blast satin finish. Bracket is fabricated of heavy-duty stainless steel with stainless steel hooks. Threaded studs are provided for rear mounting to specified wall thickness. 1-1/2" (38 mm) 7-1/2" 7-1/2" (191 mm) (191 mm) 5/8" (16 mm) DIA. WALL OPENING Unit measures 18" W x 11" H. REQUIRED Projects 8" (203 mm) from wall.

1-1/2" (38 mm)

BRADLEY ACCESSORIES 67 SECURITY ACCESSORIES

MODEL SA55 Chase-Mounted (shown)

MODEL SA56 Front-Mounted Security bookshelf fabricated of heavy-duty stainless steel with exposed surfaces in architectural satin ﬁnish. All seams are welded and ground smooth. Shelf interior is glass-bead blast ﬁnish. Backplate on rear-mounted unit has welded anchor nuts to receive threaded studs (provided). 18" (457 mm) Unit measures 18" W x 5½" H. 1-1/2" (38 mm) 7-1/2" 7-1/2" (191 mm) (191 mm) Projects 8" (203 mm) from wall.

5-1/2" (140 mm)

1-1/2" (38 mm) 2-1/2" (64 mm)

SECURITY MIRRORS MODEL SA01, SA03 Security mirror frame fabricated of 14-gauge stainless steel. Reinforced with ﬁberboard backing. Chase mounted 12" (305 mm) with welded anchor nuts on back of frame. Furnished with ¼"-20 threaded studs cut to length for speciﬁed wall 1/2" (13 mm) 11" (279 mm) thickness. Designed for areas where ordinary mirrors are subject to breakage or theft, or can be used as weapons. Unit measures 12" W x 16" H. 14" (356 mm) MODEL SA03 16" Front mounted furnished with vandal-resistant, torx-head machine screws. (406 mm) REFLECTIVE SURFACES 7" (178 mm) –1 20-gauge, 300 series stainless steel polished to a No. 8 architectural finish.

–2 20-gauge, 400 series stainless steel with bright annealed finish.

–5 Plexiglas® mirror. 1" (25 mm)

MODEL SA05 (shown), SA06 Integral frame security mirror fabricated of stainless steel 11-1/4" (286 mm) polished to No. 8 architectural bright ﬁnish. Counter-sunk holes for mounting. Furnished with ¼" (6 mm) tamper- 1/2" TYP. (13 mm) resistant machine screws. Designed for areas where 17-1/4" ordinary mirrors are subject to breakage or theft, or can (438 mm) be used as weapons. Unit measures 11¼" W x 17¼" H. 8-1/4" (210 mm) MODEL SA06 Unit measures 101⁄16" W x 119⁄16" H.

TAMPER PROOF 4-1/2" SCREW (8) (114 mm) 5-1/4" (133 mm) 3" (76 mm)

68 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

SOAP DISHES

6" W x 4" H WALL OPENING MODEL SA16 7" (178 mm) Chase-mounted, recessed soap dish fabricated of heavy-duty 5-5/8" (102 mm) stainless steel with exposed surfaces in architectural satin finish. Rim of dish is beveled to insure tight fit to wall surface. Threaded studs are provided for rear chase mounting to 5" (127 mm) 3-5/8" (92 mm) specified wall thickness. Unit measures 55⁄8" W x 35⁄8" H x 2¾" D with 5" x 7" flange. 7-1/2" (191 mm) 9" (229 mm)

MODEL SA21, SA22 Soap dish fabricated of heavy-duty stainless steel in architectural satin ﬁnish. Formed from single-piece stainless steel with three

3-1/2" (89 mm) drain holes. 1/2" (13 mm) MODEL SA21 Chase-Mounted Soap dish has welded anchor nuts to receive ¼"-20 provided studs. Nuts and washers included.

MODEL SA22 Front-Mounted (shown) Soap dish supplied with ¼"-20 x 1½" L torx-head machine screws for installation to wall anchors.

TISSUE HOLDERS

2-3/8" (60 mm) MODEL SA09 Chase-Mounted

MODEL SA10 Front-Mounted (shown) Security toilet tissue holder is fabricated of heavy-duty, seamless stainless steel tubing with architectural satin ﬁnish. Stainless steel end cap is welded and ground smooth.

3" DIA. (76 mm)

MODEL SA11 Chase-mounted, recessed, roll toilet tissue holder is one-piece, drawn stainless steel, seamless construction, 45⁄16" (110 7-1/2" mm) deep, 5½" (140 mm) inside diameter. Roll will project (191 mm) 3-1/2" 9" (89 mm) (229 mm) if contraband is concealed behind tissue. Threaded studs are provided for rear mounting to speciﬁed wall thickness.

1-1/4" (32 mm)

BRADLEY ACCESSORIES 69 SECURITY ACCESSORIES

BX MODEL SA12 Front-mounted, recessed, roll toilet tissue holder is one-piece, drawn construction with welded front ﬂange plate. Unit is 45⁄16"(110 mm) deep, 5½" (140 mm) inside diameter. Roll will project if contraband is concealed behind tissue. 7" (178 mm) Unit measures 7" W x 7" H x 4½" D. 3-1/2" (89 mm)

7" (178 mm) 3-1/2" (89 mm)

MODEL SA13 Chase-Mounted

4-3/4" MODEL SA14 Front-Mounted (shown) (121 mm)

MODEL SA15 Partition-Mounted (for 1" (25 mm) thick partitions) Security toilet tissue holder is fabricated of heavy-duty, seamless stainless steel with exposed surfaces in architectural satin ﬁnish. 8" (203 mm) Interior is satin-gloss blast ﬁnish. All welds and edges are ground smooth and corners are rounded. Unit measures 4¾" W x 8" H. Projects 2¾" (70 mm) from wall.

TOOTHBRUSH HOLDERS

MODEL SA25 Chase-Mounted

MODEL SA26 Front-Mounted (shown) Security toothbrush holder fabricated of heavy-duty stainless steel with exposed surfaces in architectural satin ﬁnish. Formed 2-1/4" 1/2" (13 mm) from single piece of stainless steel. Holds 4 toothbrushes. (57 mm) Unit measures 5" W x 2¼" H. 13⁄16 3-1/2" (89 mm) Projects 2 " (71 mm) from wall.

70 BRADLEY ACCESSORIES BX icon indicates BradEX ® HOSPITALITY BRADLEYCORP.COM

Bradley offers quality crafted accessories for hotel washrooms and showers. Sturdy, stainless steel construction provides years of dependable service. Attractive, streamlined design works well with contemporary or traditional styling. Available in a variety of finishes to complement any hotel decor.

TOOTHBRUSH HOLDERS

BX MODEL 9044 Satin Finish

MODEL 9045 Bright Polish Finish

4-1/16" (103 mm) Surface-mounted stainless steel tumbler and toothbrush holder. Concealed mounting plate with set screw. Unit measures 411⁄32" W x 41⁄16" D.

2" (51 mm)

4-11/32" (110 mm)

4-1/2" (114 mm)

2-1/4" (57 mm) MODEL 924 Chrome-plated Zamac Surface-mounted tumbler and toothbrush holder. Concealed mounting plate with set screw. Unit measures 4½" W x 3½" D. 1-7/8" (48 mm)

3-1/2" (89 mm)

TOWEL BARS & SHELVES 1-3/8" (35 mm) MODEL 907 Chrome Plated Brass Towel bar. Snaps over concealed mounting plate. Unit available in 18," 24" and 36" (457 mm, 610 mm and 2-5/8" (67 mm) LENGTH 914 mm) widths.

1-3/4" (44 mm) Projects 13⁄8" (35 mm) from wall.

MODEL 908 Satin Finish Heavy-duty, surface-mounted, round towel bar. Support posts are chrome-plated brass with satin ﬁnish. Bar is satin ﬁnish stainless steel, 1" (25 mm) O.D. Unit available in 18," 24" and 30" (457 mm, 610 mm and 7/8" 762 mm) widths. (22 mm) 2-11/16" (68 mm) Projects 3¼" (83 mm) from wall. BX –24 24" (610 mm) Length 7/8" (22 mm)

BRADLEY ACCESSORIES 71 HOSPITALITY

MODEL 926 Chrome-plated Zamac

3-1/8" (79 mm) Surface-mounted, ¾" (19 mm) round towel bar. Concealed mounting plate with set screw. Unit available in 18" and 24" (457 mm and 610 mm) widths.

2" (51 mm) LENGTH Projects 31⁄8" (79 mm) from wall.

1-3/4" (44 mm)

BX MODEL 9054 Satin Finish 2” (51 mm) BX MODEL 9055 Bright Polish Finish 2” (51 mm) Surface-mounted stainless steel, ¾" (19 mm) square towel bar. Concealed mounting plate with set screw. Units available in 18," 24" and 30"* (457 mm, 610 mm and 762 mm) widths. Projects 3" (76 mm) from wall. 3-1/2” (89 mm)

* 30" (762 mm) not available for BradEX ® shipment.

BX MODEL 9065 Satin Finish

BX MODEL 9066 Bright Polish Finish

3-1/2” (89 mm) Surface-mounted stainless steel, ¾" (19 mm) round towel bar. Concealed mounting plate with set screw. Units available in 18," 24" and 30"* (457 mm, 610 mm and 2” (51 mm) 762 mm) widths.

2” Projects 3" (76 mm) from wall. (51 mm)

* 30" (762 mm) not available for BradEX ® shipment.

MODEL 9094 Satin Finish

MODEL 9095 Bright Polish Finish (shelf is satin finish) Surface-mounted stainless steel, 5" (127 mm) D shelf. 6-1/4” (159 mm) Concealed mounting plate with set screw. 5” (127 mm) Units available in 18" or 24" (457 mm and 610 mm) widths.

2” Projects 6¼" (159 mm) from wall. (51 mm)

2” (51 mm)

72 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

MODEL 9104 Satin Finish

MODEL 9105 Bright Polish Finish 8-1/4” (210 mm) Surface-mounted stainless steel, 8" (203 mm) D towel shelf. Concealed mounting plate with set screw. 2” (51 mm) Units available in 18" or 24" (457 mm and 610 mm) widths.

2” (51 mm)

MODEL 9104-90 Satin Finish

Bright Polish Finish 8” MODEL 9105-90 (203 mm) Surface-mounted stainless steel, 8" (203 mm) D towel shelf with towel bar. Concealed mounting plate with set screw.

2” (51 mm) Units available in 18" or 24" (457 mm and 610 mm) widths.

2” (51 mm)

3” (76 mm)

BX MODEL 927 Chrome-plated Zamac Surface-mounted, ¾" (19 mm) square towel bar. Concealed mounting plate with set screw. Unit available in 18" and 24" (457 mm and 610 mm) widths. 3-1/8" 1-15/16" (49 mm) SQ. (79 mm) Projects 31⁄8" (79 mm) from wall.

LENGTH

MODEL 9301 Chrome-plated Zamac

Surface-mounted, 8½" (216 mm)deep towel shelf with towel bar and support braces. Concealed mounting plate with set screw. Unit available in 18" or 24" (457 mm and 610 mm) widths. 8-1/2" (216 mm)

24-3/16" (614 mm)

3-1/8" (79 mm)

BRADLEY ACCESSORIES 73 HOSPITALITY

SOAP DISHES

BX MODEL 900 Satin Finish 5-1/2" (140 mm) 2-1/8" (54 mm) Surface-mounted stainless steel, extra heavy-duty, 7-gauge soap dish with drain holes. Satin ﬁnish. 3-1/2" (89 mm) Unit measures 5½" W x 21⁄8" H x 2¾" D.

1/2" (13 mm)

2-3/4" (70 mm)

BX MODEL 9014 Satin Finish

BX MODEL 9015 Bright Polish Finish 2” (51 mm) 4” Surface-mounted stainless steel soap dish with drain holes. (102 mm) Concealed mounting plate with set screw. 2” (51 mm) Unit measures 4¼" W x 4" D. –63 Without Drain Holes

4 1/4” (108 mm)

MODEL 9352 Bright Polish Finish

6-1/4" (159 mm) MODEL 9353 Satin Finish Recess-mounted stainless steel soap dish. Plastic soap tray. Rough wall opening 5¼" W x 5¼" H x 2" D.

6-1/4" (159 mm)

1-1/2" (38 mm)

MODEL 9362 Bright Polish Finish Stainless Steel 5-1/2" (140 mm) MODEL 9363 Satin Stainless Steel Recess-mounted soap dish. Heavy, clear-plastic soap tray.

MODEL 9362 & 9363 Rough wall opening 5¼" W x 5¼" H x 2" D. 5-1/2" (140 mm) –55 Back Clamp for Drywall Mounting

1-1/2" (38 mm)

74 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

5-1/2" (140 mm) MODEL 940 Satin Finish Recess-mounted stainless steel soap dish. Unit anchors in 5" (127 mm) masonry walls with mortar lugs. Rough wall opening 6¼" W x 4¼" H x 2¾" D.

3-1/2" (89 mm) MODEL 9402 Unit with back clamp for drywall mounting. 1-1/4" 7-1/8" (32 mm) (181 mm) 2-3/4" (70 mm)

MODEL 9401 with Mortar Lugs

BX MODEL 9403 with Wall Clamp Recess-mounted stainless steel soap dish. Rough wall opening 6¼" W x 4¼" H x 2¾" D.

5-1/2" (140 mm) MODEL 9403-96 Unit without drip lip.

5" (127 mm) 5-1/2" (140 mm)

5" MODEL (127 mm) 3-1/2" MODEL 9401 (89 mm) 9401 1-1/4” 7-1/8" (32mm) (181 mm) 2-3/4" (70 mm) 3-1/2" (89 mm) MODEL 9403 5-1/2" 9403 (140 mm) 7-1/8" (181 mm) 2-3/4" (70 mm)

MODEL 921 Chrome-plated Zamac

2-1/16" (52 mm) MODEL 921-60 with Drain Holes 2-7/8" (73 mm) Surface-mounted soap dish. Concealed mounting plate with set screw. 1-1/2" (38 mm) Unit measures 315⁄16" W x 27⁄8" D. 3-15/16" (100 mm)

MODEL 901 Chrome Plated Brass 3-3/4" 2-5/8" (67 mm) (95 mm) MODEL 901-60 with Drain Holes 1" (25 mm) Soap dish. Snaps over concealed mounting plate. 7/8" (22 mm)

2-5/8" (67 mm)

4-1/2" (114 mm)

BRADLEY ACCESSORIES 75 HOSPITALITY

FACIAL TISSUE DISPENSERS

MODEL 987 Satin Finish Recess-mounted facial tissue dispenser fabricated of stainless steel with exposed surfaces in satin ﬁnish. Rolled rim on face plate opening. Holds one box of 100 tissues. Unit measures 115⁄8" W x 6¼" H x 25⁄8" D. 10-3/8" (2) MOUNTING HOLES (264 mm) MODEL 987-78 Polished Stainless Steel Finish 6-1/4" (159 mm) See bradleycorp.com for exact dimensions of each model. 2-1/2" (64 mm) 5" (127 mm)

1" (25 mm) 11-5/8" (295 mm)

2-5/8" (67 mm)

BX MODEL 987-36 Satin Finish Recess-mounted, large-capacity facial tissue dispenser fabricated of stainless steel with exposed surfaces in satin ﬁnish. Holds one box of 300 tissues. ¾ 1⁄8 10-3/8" Rough wall opening 10 " W x 5 " H x 4" D. (2) MOUNTING HOLES (264 mm) See bradleycorp.com 6-1/4" for exact dimensions of each model. (159 mm)

5" (127 mm)

11-5/8" 1-3/4" (295 mm) (44 mm) 4" (102 mm)

MODEL 987-11 Satin Finish Surface-mounted facial tissue dispenser fabricated of stainless steel with exposed surfaces in satin ﬁnish. Holds one box of 100 tissues.

5" (127 mm) Unit measures 10½" W x 5" H x 23⁄8" D. See bradleycorp.com for exact dimensions of each model.

10-1/2" (267 mm)

2-3/8" (60 mm)

76 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

HOOKS

1-1/2” (38 mm) MODEL 9111 Satin Finish Surface-mounted stainless steel clothes hook. Exposed mounting. Projects 1½" (38 mm) from wall.

2-1/4” (57 mm)

BX MODEL 9114 Satin Finish 2” (51 mm) 2” Bright Polish Finish (51 mm) BX MODEL 9115 Surface-mounted stainless steel, single robe hook. Concealed mounting plate with set screw.

2” Units measure 2" W x 2" H. (51 mm) Projects 2" (51 mm) from wall.

1-1/4” 1-3/64” (32 mm) (27 mm) BX MODEL 917 Satin Finish 1-1/4” (32 mm) Surface-mounted stainless steel, single robe hook. 7/8” (22 mm) Exposed mounting. Projects 11⁄8" (29 mm) from wall.

2-3/8” 1/4” (60 mm) (6 mm)

29/32” (23 mm)

BX 2-1/4" (57 mm) MODEL 9124 Satin Finish

BX MODEL 9125 Bright Polish Finish Surface-mounted stainless steel, double robe hook. Concealed 2" SQ. (51 mm) mounting plate with set screw. 4" (102 mm) Projects 2¼" (57 mm) from wall.

BX MODEL 9314 Satin Finish 2" (51 mm) MODEL 9315 Bright Polish Finish Surface-mounted stainless steel towel hook. Concealed mounting 2" (51 mm) plate with set screw. MODEL 9314 Projects 47⁄16" (113 mm) from wall. MODEL 9315 Projects 41⁄8" (105 mm) from wall. 4-7/16" (113 mm)

BRADLEY ACCESSORIES 77 HOSPITALITY

MODEL 931 Chrome-plated Zamac

2-1/8" (54 mm) Surface-mounted, single robe hook. Concealed mounting plate with set screw. 1⁄8 2-1/8" Projects 2 " (54 mm) from wall. (54 mm)

1-1/2" (38 mm)

MODEL 9311 Chrome-plated Zamac 2-1/4" (57 mm) 5-1/8" (130 mm) Surface-mounted towel hook. Concealed mounting plate with set screw.

1-7/8" (48 mm) Projects 51⁄8" (130 mm) from wall.

BX MODEL 932 Chrome-plated Zamac 2-1/8" (54 mm) Surface-mounted, double robe hook. Concealed mounting plate

1-1/2" with set screw. (38 mm) Projects 1½" (38 mm) from wall.

1-7/16" (37 mm)

2-11/16" MODEL 911 Chrome-plated Brass (68 mm) Single robe hook. Snaps over concealed mounting plate. Projects 2" (51 mm) from wall.

1-3/4" (44 mm)

2" (51 mm)

78 BRADLEY ACCESSORIES BX icon indicates BradEX ® BRADLEYCORP.COM

BX MODEL 9118 Exposed Mounting

BX MODEL 9119 Concealed Mounting Robe hook constructed of forged brass with bright chrome ﬁnish.

3" DIA. 3-15/16" (76 mm) (100 mm) Unit measures 3" (76 mm) in diameter. Projects 315⁄16" (100 mm) from wall.

BX –81 Satin Chrome-Plated Brass

2-5/8" (67 mm) BX MODEL 912 Chrome-plated Brass

1-3/4" Double robe hook. Snaps over concealed mounting plate. (44 mm) Projects 1¾" (44 mm) from wall.

1-3/4" (44 mm)

MODEL 914 Chrome-plated Brass 3-1/2" (89 mm) Double hook. Exposed fasteners. Unit measures 2¾" in diameter. 2-3/4" (70 mm) Projects 1½" (38 mm) and 3½" (89 mm) from wall.

1/4" (6 mm)

1-15/16" (49 mm)

3/4" (19 mm) 3/16" (5 mm) BX MODEL 915 Chrome-plated Brass Hook and bumper. Exposed fasteners. Projects 3" (76 mm) from wall.

2-1/4" (57 mm) BX MODEL 9134 Satin Finish

BX MODEL 9135 Bright Polish Finish Surface-mounted stainless steel, combination hat and coat hook. Concealed mounting plate with set screw. 7-1/8" 2" (51 mm) (181 mm) Projects 25⁄8" (67 mm) from wall.

2-5/8" (67 mm)

BRADLEY ACCESSORIES 79 HOSPITALITY

TOWEL RINGS

2" (51 mm) MODEL 9334 Satin Finish REF. 2-1/4" (57 mm) REF. BX MODEL 9335 Bright Polish Finish

4-3/8" (111 mm) REF. 2" (51 mm) Surface-mounted stainless steel towel ring. Concealed mounting REF. plate with set screw. Projects 23⁄8" (60 mm) from wall. 5" (127 mm) REF.

2-1/8'' MODEL 934 Chrome-plated Zamac (54 mm) 1-3/4'' (44 mm) Surface-mounted towel ring. Concealed mounting plate with set screw. 1-1/2'' (38 mm) Projects 1¾" (44 mm) from wall.

5-7/8'' (149 mm)

MISCELLANEOUS

MODEL 9495 Surface-mounted cup dispenser. Fabricated of 22-gauge stainless steel with exposed surfaces in architectural satin 14-1/2" (368 mm) ﬁnish. Cabinet hinged at bottom and secured with tumbler lock on top. Holds 150 - 3 oz (89 ml) cups. Also accommodates 7 oz (207 ml) cups. Unit measures 3¼" W x 14½" H x 3¼" D.

3-1/4" (83 mm) 3-1/4" (83 mm)

MODEL 947 Surface-mounted retractable clothesline. Constructed of heavy- gauge No. 8 bright polished stainless steel. Cord length is 6' (1.83 M).

80 BRADLEY ACCESSORIES BX icon indicates BradEX ® CUSTODIAL BRADLEYCORP.COM

Bradley offers a variety of hook, holder and shelf combinations to organize custodial equipment. Different configurations are available to fit any need or any space. Welded stainless steel construction stands up to tough use. Available in architectural satin finish.

10" (254 mm) BX MODEL 9933 10" 8" (254 mm) (203 mm) 10" One-piece construction with welded gusset and hooks. Mop and (254 mm) broom holders consist of spring-activated rubber cams on plated- 2" (51 mm) steel retainers. Unit measures 14" H x 34" L. Shelf projects 8" (203 mm) 14" * from wall. (356 mm) * 34" Has 4 hooks and 3 holders. (864 mm) 3" TYP. (76 mm) * EQUALLY SPACED MODEL 9934 Unit 44" (1118 mm) L, has 5 hooks and 4 holders.

BX MODEL 9943

Unit measures 7¼" H x 24" L. Projects 2¼" (57 mm) from wall. Has 3 hooks. DIM. "A" MODEL 9944 Unit 36" (914 mm) L, has 4 hooks. DIM. "C" DIM. "B" 3" MODEL 9945 Unit 48" (1219 mm) L, has 5 hooks. 7-1/4" (76 mm) (184 mm) MODEL 9946 Unit 60" (1524 mm) L, has 6 hooks. MOUNTING HOLES 2-5/8" (67 mm)

BX MODEL 9953 Surface-mounted mop and broom holder. Fabricated of satin- ﬁnish stainless steel. Mop and broom holders consist of spring- "A" activated rubber cams on plated-steel retainers. "B" 1" (25 mm) 15/16" (24 mm) Unit measures 4" H x 24" L. Projects 2¾" (70 mm) from wall. Has 3 holders. BX MODEL 9954 Unit 36" (914 mm) L, has 4 holders. 4" 16" 4" (102 mm) (406 mm) (102 mm) MODEL 9955 Unit 48" (1219 mm) L, has 5 holders.

MODEL 9983 Surface-mounted utility shelf with drying rod. Fabricated of satin- ﬁnish stainless steel. Mop and broom holders of spring-activated rubber cams on plated-steel retainers. HOOKS "A" Unit measures 30" L x 8" D. Has 2 hooks and 3 holders. 1-9/16" 2-11/16" "C" (40 mm) (68 mm) BX MODEL 9984 Unit 36" (914 mm) L, has 3 hooks and 4 holders. MODEL 9985 Unit 42" (1067 mm) L, has 4 hooks and 5 holders. MODEL 9986 Unit 48" (1219 mm) L, has 5 hooks and 6 holders. DRYING ROD MOP HOLDERS 6-5/8" "B" (168 mm)

3-1/2" 3-1/2" (89 mm) (89 mm) MODEL 991 Corner Guard Fabricated of stainless steel with exposed surfaces in architectural satin ﬁnish. Exposed surfaces are rounded. No 40" (1016 mm) sharp corners. Secured to wall with special adhesive backing. Unit measures 3½" W x 40" H.

90° BRADLEY ACCESSORIES 81 HEALTH CARE UNITS

Hygiene, durability and safety are featured in Bradley’s hospital/patient care line. Fabricated of stainless steel for continuous, trouble-free use.

BX MODEL 9813 13-3/8" (340 mm) 1" (25 mm) 11-3/8" (289 mm) Specimen pass-thru cabinet. Self-closing doors with stainless

SELF-CLOSING steel piano hinges and chrome-plated brass knobs. Interlock DOORS 12-5/8" mechanism prevents both doors from being open at the same (321 mm) time. Equipped with seam-soldered spill tray. 10-5/8" (270 mm) Rough wall opening 115⁄8" W x 107⁄8" H.

REMOVABLE DRIP TRAY 1" (25 mm) Flanges adjust from 3½" (89 mm) to 5½" (140 mm) wall thickness.

MODEL 989 4⁷⁄₈" (124) Recessed needle disposal fabricated of stainless steel with exposed surfaces in satin ﬁnish. Door secured by piano hinge.

13¾" Removable needle disposal with tumbler lock. (349) Rough wall opening 12" W x 173⁄8" H x 5" D.

Dim. "A" to ﬁnished MODEL 989-11 Surface-Mounted ﬂoor 19¹⁄₈" (152) Needle disposal not included

11¹⁷⁄₆₄" (268)

11¾" (299)

5/8" (16 mm) MODEL 990 15-1/4" (387 mm ) Recess-mounted bedpan storage cabinet. Door has full-length piano hinge, magnetic catch, rodstop, chrome-plated brass knob and ventilation louvers. Interior rods and removable drip 30-15/16" (786 mm) pan. Leak-proof bottom prevents leakage behind unit and into wall structure. Rough wall opening 155⁄8" W x 291⁄16" H x 5" D. MODEL 990-11 Surface-Mounted

17-3/8" 15-3/8" (441 mm (391 mm) )

MODEL 9905 Surface-mounted bedpan and urinal storage unit. Fabricated of

(6) MTG. HOLES stainless steel with exposed surfaces in satin ﬁnish.

URINAL B0TTLE Unit measures 12" W x 24" H. 24" Projects 5¼" (133 mm) from wall. (610 mm) BED PAN Note: Bedpan and urinal not included.

1" (25 mm) TYP.

1/2" (13 mm) 1-1/2" (38 mm) TYP. TYP. 12" (305 mm)

82 BRADLEY ACCESSORIES BX icon indicates BradEX ® MEDICINE CABINETS BRADLEYCORP.COM

BX MODEL 175 15-1/8" (384 mm) Recess-mounted, stainless steel medicine cabinet. ¼" (6 mm) thick mirrored door 171⁄8" W x 305⁄8" H and spring-buffered

30-5/8" rodstop. Cabinet may be ﬁeld inverted for left hand door swing. (778 mm) Three adjustable stainless steel shelves.

28-5/8" (727 mm) Rough wall opening 155⁄8" W x 291⁄8" H x 4" D. –10 Semi-Recessed

–11 Surface-Mounted 4" (102 mm) 17-1/8" (435 mm)

13-1/2" BX MODEL 9661 (343 mm) 2-7/8" (73 mm) Recess-mounted medicine cabinet. Cabinet is fabricated of sturdy one-piece, white injection-molded polystyrene. Door is 7/8" (22 mm) steel with baked-enamel ﬁnish. Door has full piano hinge and magnetic catch. Mirror frame of stainless steel. Two adjustable polystyrene shelves. Reversible to swing either left or right.

17-1/2" Rough wall opening 14" W x 18" H x 3" D. 22-3/16" (445 mm) (564 mm)

16-3/16" (411 mm) 3-3/4" (95 mm)

13-1/2" MODEL 9663 (343 mm) BX 3-1/2" (89 mm) Recess-mounted medicine cabinet. Seamless cabinet fabricated of one-piece, heavy drawn steel with baked-enamel finish. 1" (25 mm) Mirror frame of stainless steel. Mirror of first-quality float glass, electro-copper-plated backed. Three adjustable prepainted metal shelves. Reversible for left or right hand swing.

26" 23-1/2" 5⁄8 (660 mm) (597 mm) Rough wall opening 14" W x 24" H x 3 " D.

16" (406 mm) 4-1/2" (114 mm)

MODEL 9664 15-1/2" BX (394mm) 4-1/2" 5" Surface-mounted medicine cabinet. Fabricated of heavy-gauge (114 mm) (127 mm) steel with baked-enamel finish. Mirror frame of stainless steel. 16-1/8" (410 mm) Mirror of first-quality float glass, electro-copper-plated backed. Two removable metal shelves. Reversible for left or right hand swing. ¼ ¼ 22-1/8" 21-1/2" Unit measures 16 " W x 22 " H x 5" D. (562 mm) (546 mm)

BRADLEY ACCESSORIES 83 MILLS® PARTITIONS

BRADMAR™

Fabricated from 30% pre-consumer or 100% post-consumer recycled high-density polyethylene (HDPE). No-Site™ style partitions with no gap between the doors and pilasters are available in Bradmar. Standard colors including speckled and solid colors with stainless steel shoes and aluminum wall brackets. Suited for humid and wet areas, and high-trafﬁc or vandal-prone locations. Recommended for schools, parks, recreation centers. 15-year warranty.

HARDWARE: Heavy-duty aluminum.

PHENOLIC

Highly durable. Almost any Formica,® Arborite,® or Trespa color/pattern can be selected. Edges are solid black. Recommended for humid and wet areas. Resists water, oil, and bacteria. Withstands hose-down cleaning. Suited for outdoor parks, pools, shower rooms. 3-year warranty against delamination and discoloration.

HARDWARE: Heavy-duty, cast stainless steel, stamped stainless steel door hinges.

POWDER COATED

21 standard colors. High-quality gloss ﬁnish. Low cost. Recommended for ofﬁce buildings, restaurants, religious institutions and environments less prone to vandals. 15-year warranty against rust-out.

HARDWARE: Heavy-duty, chromed Zamac.

FUSION GRANITE

Four colors of natural granite and three stainless steel ﬁnishes. Combines the natural beauty and durability of granite with the sleek style of stainless steel.

STAINLESS STEEL

High design and contemporary style. Soft brushed satin ﬁnish, 5WL textured or leather-grain patterns available. Textured patterns wrap around edges. Recommended for airports, stadiums, rest stops. 15-year warranty against rust-out.

HARDWARE: Heavy-duty, chromed Zamac.

84 BRADLEY ACCESSORIES BX icon indicates BradEX ® PARTITION STYLES BRADLEYCORP.COM

SENTINEL™ OVERHEAD BRACED – SERIES 400 Overhead braced partitions provide the most economical solution for heavy-trafﬁc and vandalism-prone areas. Because it requires no special ﬂoor or ceiling construction, installation is easy in new or old buildings. The anti-grip head rail provides outstanding rigidity.

FLOOR BRACED – SERIES 500 This style complements design with functional performance. Recommended for buildings with high ceilings, it enhances the effect of spaciousness. A minimum of 3" (76 mm) concrete construction is required for anchoring. This style is not available in Bradmar solid plastic.

CEILING HUNG – SERIES 600 Ideal for areas with low ceilings. Offering an area free from obstruction to allow for fast and easy maintenance, this system requires proper structural supports in the ceiling for maximum rigidity. Not recommended for ceiling heights over 8' (2.4M). This style is not available in Bradmar solid plastic.

FLOOR-TO-CEILING – SERIES 700 Anchored at the ﬂoor and ceiling, main structural support can be provided by Series 500 or 600 mounting systems. Perfect for areas where additional support is required.

URINAL SCREENS Wall-hung style provides economy and ease of maintenance while floor supported or floor-to-ceiling (not shown) screens offer extra stability for high-traffic areas.

SHOWER DIVIDERS Available in Bradmar solid plastic, an advanced formula of high-density polyethylene (HDPE). Standard sized or customized to meet your facility layout, Bradmar shower dividers are available in multiple colors, including speckled and solid colors (see bradleycorp.com for complete list of colors). All Bradmar solid plastic products are covered by a 15-year warranty.

BRADLEY ACCESSORIES 85 LENOX® LOCKERS

Design flexibility is a prime feature of Lenox® Lockers, offering countless options and configurations. Installation is simple. Lockers are shipped fully assembled and ready for attachment to the wall and each other.

Solid plastic lockers are formed of polymer resin with homogeneous color. Doors and frames are 1/2" (13 mm) thick, and sides, shelves, tops and bottoms are 3/8" (10 mm) thick. Locker box is one piece, all welded construction, providing outstanding rigidity and strength. Continuous latch bar runs the entire length of the door, providing a secure closure. Handle mechanism is capable of accepting a padlock and is securely fastened to the door. Stainless steel piano hinge is continuous and integrates into the full length of the door and main locker body.

20-year warranty against rust, delamination or breakage of any of the plastic components under normal use.

OPTIONS INCLUDE: • Built-in Key Locks • End Panels • Number Plates • Built-in Combination Locks • Solid Plastic Bases • Plastic Coat Hooks • Coin-Operated Locks • Slope Tops • Coat Rods • Card Locks • Colored Flat Tops • Wall Hooks • Keypad Locks • Mesh Doors • Fillers • Combination Padlocks • Engraved Logos • Mirrors

Z-LOCKER CUBBY LOCKER Z-Locker design provides The easy-access cubby practical multi-tiered storage locker is perfect for items without wasting valuable ﬂoor that do not require locked space or compromising customer storage. The durable cubby satisfaction. Double your locker is shipped fully assembled availability while still providing and can reduce installation clients with hanging space to costs by up to 50 percent. keep garments wrinkle free. Note: Three cubby lockers shown.

LOCKER BENCH CUBBY BENCH The 1" (25 mm) thick bench Convenient seating top is smooth, seamless and and easy-access oversized. The 20" (508 mm) storage in one. locker underneath provides Space-saving solution valuable additional storage apace. available in 12 colors. Available in 3' (0.9 M) through Shipped fully assembled. 6' (1.8 M) lengths.

PEDESTAL BENCH GEAR LOCKERS The bench top is 1½" (38 mm) Wider and deeper than standard thick and available in 36" (914 mm) lockers, Lenox Gear Lockers to 96" (2438 mm) in one-foot provide maximum storage and increments. Pedestals are black maximum durability with the anodized aluminum. ADA-compliant best lead time and best warranty height is 18½" (470 mm). available! 9½," 12," 18" and 24" (241 mm, 305 mm, 457 mm and 610 mm) widths available.

86 BRADLEY ACCESSORIES BX icon indicates BradEX ® MAINTENANCE INSTRUCTIONS BRADLEYCORP.COM

STAINLESS STEEL

Stainless Steel is a low-carbon steel that contains chromium. The addition of chromium gives the steel its unique corrosion-resisting properties. It is extremely durable, resists corrosion, and stands up to many chemicals.

Despite the fact that stainless steel surfaces are generally non-tarnishing, they are not stain or rust proof. Stainless steel must be kept clean and free from contaminants. Frequent cleaning with mild soap and water or glass cleaner and a cotton cloth is required. Any discoloration or corrosion (commonly caused by contact with harsh cleaner, muriatic acid or bleach solutions) should be removed as soon as possible or permanent discoloration and pitting of the surface could occur. Most discoloration can be removed with a mild cleanser or stainless steel cleaner and a Scotchbrite® pad. The surface should then be thoroughly rinsed with clear water. With proper maintenance, stainless steel will maintain its luster and appearance indeﬁnitely.

MIRRORS

Bradley mirrors are fabricated from heavy-gauge stainless steel frames and plate glass or an alternative reﬂective surface. The frame can be cared for by following the general stainless steel maintenance instructions above. Reﬂective surfaces can be cleaned with any standard non-abrasive glass cleaner and a soft cloth. Care must be taken to avoid allowing the cleaner to run down the surface of the mirror and collect in the frame. If allowed to continue, this could lead to premature silver spoilage and spotting on stainless steel.

SOAP DISPENSERS

Bradley soap dispensers provide dependable, consistent operation over the long term when the proper soap is used and when a minimal amount of periodic maintenance is performed on the valves. Soaps satisfying these basic guidelines will provide consistent ﬂow and reduce clogs. Soap thickness is determined by a measurement called viscosity. Soap viscosity should be between 100 cps (centerpoise) and 2500 cps for all Bradley soap dispensers. The pH (acid) level of soaps that will perform consistently should be in the range of 6.5 to 8.5. More acidic soaps (pH levels lower than 6.5) will corrode metal parts (even stainless steel) and degrade rubber and plastic components. Most inexpensive soaps (typically the pink lotion type) fall into this acidic category and will eventually cause valve failure and metal corrosion. PCMX or Isopropanol-based antibacterial soaps (within viscosity and pH limits) will also work with Bradley dispensers. Valves must also be maintained (cleaned) to function properly. At the very minimum, hot water should be pumped through valves periodically to clear out soap residue. Ideally valves should occasionally be soaked for 30 minutes in hot water or a soap valve cleaning solution. With proper maintenance and soap, Bradley dispensers will provide long-term, trouble-free operation.

BRADLEY ACCESSORIES 87 INDEX

MODEL NO. PAGE

155 ...... 14 377-36 ...... 20 781 ...... 39 2017 ...... 28 175 ...... 83 377-3637 ...... 20 782 ...... 40 2027...... 28 198 ...... 15 377-37 ...... 20 790 ...... 42 2037 ...... 28 2A00...... 21 377-3738 ...... 20 812 ...... 5 2251 ...... 29 2A01...... 21 377-38 ...... 20 817 ...... 5 2252 ...... 29 2A02...... 21 4A00...... 53 832 ...... 5 2271 ...... 30 2A09...... 21 4A10-11...... 53 837 ...... 5 2277 ...... 30 2A10-11...... 21 4A11 ...... 53 852 ...... 5 2291 ...... 31 2A05...... 27 4A20...... 55 900...... 74 2297...... 31 2A15-36 ...... 27 401 ...... 55 901 ...... 75 2441 ...... 22 2A25-36 ...... 27 407...... 55 901-60 ...... 75 2442...... 22 2A95-36 ...... 27 5A00...... 43 907 ...... 71 2447 ...... 22 225 ...... 29 5A10 ...... 43 908...... 71 2479 ...... 23 227 ...... 30 5A20...... 43 911 ...... 78 2482-11 ...... 23 229 ...... 30 5A40-11 ...... 52 912 ...... 79 2483...... 23 234 ...... 31 505 ...... 44 914 ...... 79 2484...... 24 234-35 ...... 31 508...... 45 915 ...... 79 2494...... 24 234-65 ...... 31 508-32 ...... 45 917 ...... 77 2495...... 24 235 ...... 31 510 ...... 47 921 ...... 75 2496...... 25 236 ...... 32 515 ...... 48 921-60 ...... 75 2497...... 25 237 ...... 32 522 ...... 44 924...... 71 2901-2873 ...... 12 237-35 ...... 32 523 ...... 45 926 ...... 72 2901-2874 ...... 12 237-65 ...... 32 582 ...... 52 927 ...... 73 2902-280000 ...... 13 238 ...... 32 583...... 52 931 ...... 78 2902-287300 ...... 13 244...... 22 584...... 52 932 ...... 78 2902-287400 ...... 13 247 ...... 23 591 ...... 49 934...... 80 2903-280000 ...... 13 250-15 ...... 25 592 ...... 49 940...... 75 2904-280000 ...... 13 250W-15...... 25 594 ...... 50 947 ...... 80 2905-287300 ...... 13 251-15...... 26 6A00-11 ...... 33 953 ...... 62 2921-S000 ...... 3, 12 252 ...... 26 643...... 33 953-4 ...... 62 2921-W000...... 3, 12 259 ...... 26 644...... 33 954...... 57 2922-2873 ...... 3, 12 270 ...... 32 646 ...... 33 957 ...... 60 2922-2874 ...... 3, 12 3A05...... 16 648...... 35 958...... 60 3157 ...... 16 3A15-11...... 16 650...... 35 961 ...... 56 3251 ...... 17 315-35 ...... 17 655...... 35 962 ...... 56 3257 ...... 17 334...... 17 657 ...... 35 962-11...... 56 3565...... 19 344...... 18 658-30 ...... 36 987 ...... 76 4017 ...... 55 344-35 ...... 18 661 ...... 36 987-11...... 76 4721-15...... 53 344-65 ...... 18 662 ...... 36 987-36 ...... 76 4722-1015...... 53 346...... 18 740 ...... 40 987-78 ...... 76 4722-15...... 54 355 ...... 18 747 ...... 41 989...... 82 4731-15...... 54 355-35 ...... 18 747F ...... 41 989-11 ...... 82 4737 ...... 54 356 ...... 19 748 ...... 41 990...... 82 4781-15...... 54 356-35 ...... 19 755 ...... 42 990-11 ...... 82 4791-15...... 54 357 ...... 19 756 ...... 42 991 ...... 81 5053...... 44 357-35 ...... 19 758 ...... 42 1471 ...... 14 5054...... 44 359 ...... 19 760 ...... 42 1981 ...... 15 5061 ...... 43, 44 377 ...... 20 780 ...... 39 1985 ...... 15 5071 ...... 44

88 BRADLEY ACCESSORIES INDEX BRADLEYCORP.COM

5084...... 45 6501 ...... 35 9353...... 74 9984...... 81 5085...... 45 6531 ...... 34 9362...... 74 9985...... 81 5102 ...... 47 6542...... 34 9363...... 74 9986...... 81 5103 ...... 47 6562...... 34 9401...... 75 P10-696 ...... 20 5104 ...... 47 6563...... 34 9402...... 75 P15-025 ...... 20 5105 ...... 47 6583...... 36 9403...... 75 P15-098 ...... 20 5106 ...... 45 6843...... 38 9403-96 ...... 75 P15-195 ...... 20 5123 ...... 47 7405 ...... 40 9495...... 80 SA01...... 68 5124 ...... 48 7481 ...... 41 9522 ...... 63 SA03...... 68 5125 ...... 48 7510 ...... 42 9530-60 ...... 62 SA05...... 68 5126 ...... 45 7512 ...... 42 9530-72 ...... 62 SA06...... 68 5127 ...... 48 7805...... 39 9531 ...... 62 SA09...... 69 5224 ...... 44 7815 ...... 39 9531-4 ...... 62 SA10 ...... 69 5234 ...... 45 8170-158...... 11 9533...... 61 SA11 ...... 69 5235 ...... 45 8170-1581...... 11 9534...... 61 SA12 ...... 70 5241 ...... 44 8370-101 ...... 11 9535...... 61 SA13 ...... 70 5262 ...... 46 8370-102 ...... 11 9536...... 61 SA14 ...... 70 5263 ...... 46 8370-103 ...... 11 9537 ...... 61 SA15 ...... 70 5402...... 47 9014 ...... 74 9538...... 63 SA16 ...... 69 5412 ...... 48 9015 ...... 74 9538-4 ...... 63 SA21...... 69 5422...... 48 9044...... 71 9539...... 63 SA22...... 69 5424...... 46 9045...... 71 9539-4 ...... 63 SA25...... 70 5425...... 46 9054...... 72 9540...... 61 SA26...... 70 5831 ...... 52 9055...... 72 9541 ...... 57 SA30...... 64 5847 ...... 52 9065...... 72 9562...... 57 SA31...... 64 5911 ...... 49 9066 ...... 72 9569...... 57 SA32...... 64 5912 ...... 49 9094...... 72 9571 ...... 60 SA33...... 64 5921 ...... 50 9095...... 72 9591 ...... 58 SA35...... 64 5922 ...... 50 9104 ...... 73 9592...... 58 SA36...... 64 5932 ...... 50 9104-90 ...... 73 9593...... 59 SA37...... 65 5941 ...... 51 9105 ...... 73 9594...... 59 SA38...... 65 5942...... 51 9105-90 ...... 73 9611 ...... 56 SA39...... 65 5951 ...... 51 9111 ...... 77 9612 ...... 56 SA41...... 65 5952 ...... 51 9114 ...... 77 9661 ...... 83 SA47...... 66 6315 ...... 37 9115 ...... 77 9663...... 83 SA49...... 66 6315-KT0000 ...... 37 9118 ...... 79 9664...... 83 SA50...... 67 6322 ...... 37 9119 ...... 79 9813 ...... 82 SA51...... 67 6322-67 ...... 37 9124 ...... 77 9905...... 82 SA52...... 67 6322-68 ...... 37 9125 ...... 77 9933...... 81 SA53...... 67 6324...... 37 9134 ...... 79 9934...... 81 SA54...... 67 6324-67 ...... 37 9135 ...... 79 9943...... 81 SA55...... 68 6324-68 ...... 37 9301 ...... 73 9944...... 81 SA56...... 68 6326 ...... 38 9311 ...... 78 9945...... 81 SA70...... 66 6326-67 ...... 38 9314 ...... 77 9946...... 81 6326-68 ...... 38 9315 ...... 77 9953...... 81 6334...... 38 9334...... 80 9954...... 81 6437...... 33 9335...... 80 9955...... 81 6481...... 35 9352 ...... 74 9983...... 81

BRADLEY ACCESSORIES 89 Commercial Washroom Innovation

262 251 6000 800 BRADLEY bradleycorp.com W142 N9101 Fountain Boulevard Menomonee Falls, WI USA 53051 3767-10-0415