Linux Terminal for Mac
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Using a PC Card in Your NCD Thin Client Device
Using a PC Card in Your NCD Thin Client Device Part Number 9300674, Revision A November, 1998 Network Computing Devices, Inc. 350 North Bernardo Avenue Mountain View, California 94043 Telephone (650) 694-0650 FAX (650) 961-7711 E-mail: [email protected] Copyright Copyright © 1998 by Network Computing Devices, Inc. The information contained in this document is subject to change without notice. Network Computing Devices, Inc. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains information which is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Network Computing Devices, Inc. Trademarks Network Computing Devices, PC-Xware, and XRemote are registered trademarks of Network Computing Devices, Inc. Explora, HMX, Marathon, NCDware, ThinSTAR, and WinCenter are trademarks of Network Computing Devices, Inc. PostScript, Display PostScript, FrameMaker, and Adobe are trademarks of Adobe Systems Incorporated. MetaFrame and WinFrame are trademarks of Citrix Systems, Inc. UNIX is a registered trademark in the United States and other countries licensed exclusively through X/Open Company Limited. X Window System is a trademark of X Consortium, Inc. Windows 95, Windows NT, and Windows Terminal Server are trademarks of Microsoft Corporation. Windows and Microsoft are registered trademarks of Microsoft Corporation. Other trademarks and service marks are the trademarks and service marks of their respective companies. All terms mentioned in this book that are known to be trademarks or service marks have been appropriately capitalized. -
Ubuntu Kung Fu
Prepared exclusively for Alison Tyler Download at Boykma.Com What readers are saying about Ubuntu Kung Fu Ubuntu Kung Fu is excellent. The tips are fun and the hope of discov- ering hidden gems makes it a worthwhile task. John Southern Former editor of Linux Magazine I enjoyed Ubuntu Kung Fu and learned some new things. I would rec- ommend this book—nice tips and a lot of fun to be had. Carthik Sharma Creator of the Ubuntu Blog (http://ubuntu.wordpress.com) Wow! There are some great tips here! I have used Ubuntu since April 2005, starting with version 5.04. I found much in this book to inspire me and to teach me, and it answered lingering questions I didn’t know I had. The book is a good resource that I will gladly recommend to both newcomers and veteran users. Matthew Helmke Administrator, Ubuntu Forums Ubuntu Kung Fu is a fantastic compendium of useful, uncommon Ubuntu knowledge. Eric Hewitt Consultant, LiveLogic, LLC Prepared exclusively for Alison Tyler Download at Boykma.Com Ubuntu Kung Fu Tips, Tricks, Hints, and Hacks Keir Thomas The Pragmatic Bookshelf Raleigh, North Carolina Dallas, Texas Prepared exclusively for Alison Tyler Download at Boykma.Com Many of the designations used by manufacturers and sellers to distinguish their prod- ucts are claimed as trademarks. Where those designations appear in this book, and The Pragmatic Programmers, LLC was aware of a trademark claim, the designations have been printed in initial capital letters or in all capitals. The Pragmatic Starter Kit, The Pragmatic Programmer, Pragmatic Programming, Pragmatic Bookshelf and the linking g device are trademarks of The Pragmatic Programmers, LLC. -
Porting a Window Manager from Xlib to XCB
Porting a Window Manager from Xlib to XCB Arnaud Fontaine (08090091) 16 May 2008 Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version pub- lished by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts and no Back-Cover Texts. A copy of the license is included in the section entitled "GNU Free Documentation License". Contents List of figures i List of listings ii Introduction 1 1 Backgrounds and Motivations 2 2 X Window System (X11) 6 2.1 Introduction . .6 2.2 History . .6 2.3 X Window Protocol . .7 2.3.1 Introduction . .7 2.3.2 Protocol overview . .8 2.3.3 Identifiers of resources . 10 2.3.4 Atoms . 10 2.3.5 Windows . 12 2.3.6 Pixmaps . 14 2.3.7 Events . 14 2.3.8 Keyboard and pointer . 15 2.3.9 Extensions . 17 2.4 X protocol client libraries . 18 2.4.1 Xlib . 18 2.4.1.1 Introduction . 18 2.4.1.2 Data types and functions . 18 2.4.1.3 Pros . 19 2.4.1.4 Cons . 19 2.4.1.5 Example . 20 2.4.2 XCB . 20 2.4.2.1 Introduction . 20 2.4.2.2 Data types and functions . 21 2.4.2.3 xcb-util library . 22 2.4.2.4 Pros . 22 2.4.2.5 Cons . 23 2.4.2.6 Example . 23 2.4.3 Xlib/XCB round-trip performance comparison . -
A Modern Introduction to Programming
Eloquent JavaScript A Modern Introduction to Programming Marijn Haverbeke Copyright © 2014 by Marijn Haverbeke This work is licensed under a Creative Commons attribution-noncommercial license (http://creativecommons.org/licenses/by-nc/3.0/). All code in the book may also be considered licensed under an MIT license (http://opensource. org/licenses/MIT). The illustrations are contributed by various artists: Cover by Wasif Hyder. Computer (introduction) and unicycle people (Chapter 21) by Max Xiantu. Sea of bits (Chapter 1) and weresquirrel (Chapter 4) by Margarita Martínez and José Menor. Octopuses (Chapter 2 and 4) by Jim Tierney. Object with on/off switch (Chapter 6) by Dyle MacGre- gor. Regular expression diagrams in Chapter 9 generated with regex- per.com by Jeff Avallone. Game concept for Chapter 15by Thomas Palef. Pixel art in Chapter 16 by Antonio Perdomo Pastor. The second edition of Eloquent JavaScript was made possible by 454 financial backers. You can buy a print version of this book, with an extra bonus chapter included, printed by No Starch Press at http://www.amazon.com/gp/product/ 1593275846/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN= 1593275846&linkCode=as2&tag=marijhaver-20&linkId=VPXXXSRYC5COG5R5. i Contents On programming .......................... 2 Why language matters ....................... 5 What is JavaScript? ......................... 9 Code, and what to do with it ................... 11 Overview of this book ........................ 12 Typographic conventions ...................... 14 1 Values, Types, and Operators 15 Values ................................. 16 Numbers ............................... 17 Strings ................................ 21 Unary operators ........................... 22 Boolean values ............................ 23 Undefined values ........................... 26 Automatic type conversion ..................... 27 Summary ............................... 30 2 Program Structure 32 Expressions and statements .................... 32 Variables .............................. -
NCD Thin Client Xware User's Guide
NCD NCD Thin Client Xware User’s Guide Part Number 5401612 June 1998 Network Computing Devices, Inc. 350 North Bernardo Avenue Mountain View, CA 94043-5207 Technical support: 503/641-2200 Technical support FAX: 503/641-2959 Email: [email protected] World Wide Web: http://www.ncd.com Copyright Copyright © 1998 by Network Computing Devices, Inc. The information contained in this document is subject to change without notice. NCD SHALL NOT BE LIABLE FOR ERRORS CONTAINED HEREIN OR FOR ANY DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. This document contains information which is protected by copyright. All rights are reserved. Made in the U.S.A. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of NCD. Title to and ownership of the Software, and all copies thereof, shall at all times reside with NCD and its licensors, and is protected by United States copyright laws and international treaty provisions. Trademarks Network Computing Devices is a registered trademark of Network Computing Devices, Inc. NCDnet, NCDware, and Thin Client Xware FTP are trademarks of Network Computing Devices, Inc. Apple and LaserWriter are registered trademarks of Apple Computer, Inc. Citrix, WinFrame, and ICA are registered trademarks of Citrix Systems, Inc. DECnet, DECwindows, VMS, VT, and ULTRIX are trademarks of Digital Equipment Corporation. Ethernet is a trademark of Xerox Corporation. Hewlett-Packard and LaserJet are registered trademarks of Hewlett-Packard Corporation. HP-UX is a trademark of Hewlett-Packard Corporation. -
Cygwin User's Guide
Cygwin User’s Guide Cygwin User’s Guide ii Copyright © Cygwin authors Permission is granted to make and distribute verbatim copies of this documentation provided the copyright notice and this per- mission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this documentation under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this documentation into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the Free Software Foundation. Cygwin User’s Guide iii Contents 1 Cygwin Overview 1 1.1 What is it? . .1 1.2 Quick Start Guide for those more experienced with Windows . .1 1.3 Quick Start Guide for those more experienced with UNIX . .1 1.4 Are the Cygwin tools free software? . .2 1.5 A brief history of the Cygwin project . .2 1.6 Highlights of Cygwin Functionality . .3 1.6.1 Introduction . .3 1.6.2 Permissions and Security . .3 1.6.3 File Access . .3 1.6.4 Text Mode vs. Binary Mode . .4 1.6.5 ANSI C Library . .4 1.6.6 Process Creation . .5 1.6.6.1 Problems with process creation . .5 1.6.7 Signals . .6 1.6.8 Sockets . .6 1.6.9 Select . .7 1.7 What’s new and what changed in Cygwin . .7 1.7.1 What’s new and what changed in 3.2 . -
Introduction to Docker Version: A2622f1
Introduction to Docker Version: a2622f1 An Open Platform to Build, Ship, and Run Distributed Applications Docker Fundamentals a2622f1 1 © 2015 Docker Inc Logistics • Updated copy of the slides: http://lisa.dckr.info/ • I'm Jérôme Petazzoni • I work for Docker Inc. • You should have a little piece of paper, with your training VM IP address + credentials • Can't find the paper? Come get one here! • We will make a break halfway through • Don't hesitate to use the LISA Slack (#docker channel) • This will be fast-paced, but DON'T PANIC • To contact me: [email protected] / Twitter: @jpetazzo Those slides were made possible by Leon Licht, Markus Meinhardt, Ninette, Yetti Messner, and a plethora of other great artist of the Berlin techno music scene, alongside with what is probably an unhealthy amount of Club Mate. Docker Fundamentals a2622f1 2 © 2015 Docker Inc Part 1 • About Docker • Your training Virtual Machine • Install Docker • Our First Containers • Background Containers • Restarting and Attaching to Containers • Understanding Docker Images • Building Docker images • A quick word about the Docker Hub Docker Fundamentals a2622f1 3 © 2015 Docker Inc Part 2 • Naming and inspecting containers • Container Networking Basics • Local Development Work flow with Docker • Working with Volumes • Connecting Containers • Ambassadors • Compose For Development Stacks Docker Fundamentals a2622f1 4 © 2015 Docker Inc Extra material • Advanced Dockerfiles • Security • Dealing with Vulnerabilities • Securing Docker with TLS • The Docker API Docker Fundamentals -
Multiview Terminal Emulator User Guide © 2008 by Futuresoft, Inc
MultiView Terminal Emulator User Guide © 2008 by FutureSoft, Inc. All rights reserved. MultiView User Guide This manual, and the software described in it, is furnished under a license agreement. Information in this document is subject to change without notice and does not represent a commitment on the part of FutureSoft. FutureSoft assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or other wise, without the prior, written per- mission of FutureSoft, Inc. MultiView 2007, MultiView 2000 Server Edition, MultiView 2008 Server Edition, MultiView Catalyst, MultiView License Manager, MultiView DeskTop and Host Support Server are tradenames of FutureSoft, Inc. Edition 1 May 2008 Document #E-MVUG-MV2007-P053108 Last Updated: 102308 FutureSoft, Inc. 12012 Wickchester Lane, Suite 600 Houston, Texas 77079 USA Printed in the USA 1.800.989.8908 [email protected] http://www.futuresoft.com Table of Contents Contents Chapter 1 Introduction Introduction to MultiView 2007 ....................................................................................... 2 Minimum Requirements .................................................................................................. 2 Contacting FutureSoft Support ........................................................................................ 3 Chapter 2 Installation and Configuration Installing MultiView -
AVR244 AVR UART As ANSI Terminal Interface
AVR244: AVR UART as ANSI Terminal Interface Features 8-bit • Make use of standard terminal software as user interface to your application. • Enables use of a PC keyboard as input and ascii graphic to display status and control Microcontroller information. • Drivers for ANSI/VT100 Terminal Control included. • Interactive menu interface included. Application Note Introduction This application note describes some basic routines to interface the AVR to a terminal window using the UART (hardware or software). The routines use a subset of the ANSI Color Standard to position the cursor and choose text modes and colors. Rou- tines for simple menu handling are also implemented. The routines can be used to implement a human interface through an ordinary termi- nal window, using interactive menus and selections. This is particularly useful for debugging and diagnostics purposes. The routines can be used as a basic interface for implementing more complex terminal user interfaces. To better understand the code, an introduction to ‘escape sequences’ is given below. Escape Sequences The special terminal functions mentioned (e.g. text modes and colors) are selected using ANSI escape sequences. The AVR sends these sequences to the connected terminal, which in turn executes the associated commands. The escape sequences are strings of bytes starting with an escape character (ASCII code 27) followed by a left bracket ('['). The rest of the string decides the specific operation. For instance, the command '1m' selects bold text, and the full escape sequence thus becomes 'ESC[1m'. There must be no spaces between the characters, and the com- mands are case sensitive. The various operations used in this application note are described below. -
Serial (RS-232) Commands
Serial (RS-232) Commands Chapter 8 Serial (RS-232) Commands Overview The 7330 Controller has two serial port connectors on the rear panel of the controller labeled RS232-1 and RS232-2. Either port can be configured as the Console port, the port that you use to enter commands to the repeater controller and to perform firmware updates. Whichever port is not being used as the Console port can be used as the Auxiliary port. The 7330 Repeater firmware accepts commands on the Console port. This serial port has a dedicated command queue so that commands can be processed without being delayed by user commands from the DTMF decoders. Commands entered via the serial port have the same format as commands entered via DTMF. The Auxiliary port is currently unused. This chapter describes the uses of the Console port, the command formats, sending a text file of commands, managing files in your controller, and configuring the serial ports. 8-1 7330 Chapter 8 Using the Console Port The Console port has a number of different uses and sets of commands depending on what firmware is running in the 7330 Controller. By default, the 7330 Repeater firmware is controlling the radio equipment attached to the controller. Other firmware installed in the controller, called SBOOT, allows you to manage the files stored in the flash memory of the controller. When power is first applied to the controller, the firmware outputs the following message on the Console port: S-COM 7330 Repeater V3.3 This message tells you what firmware is running and it’s version. -
Interfacing the ESP8266 Wireless Terminal Contents 1 Introduction
Interfacing the ESP8266 Wireless Terminal Ondřej Hruška Katedra měření, FEL ČVUT March 2, 2017 Contents 1 Introduction1 2 Feature overview2 2.1 Terminal implementation........................2 3 Interfacing the terminal3 3.1 UART connection............................3 3.2 Debug port................................4 3.3 Control codes and escape sequences...................4 3.3.1 Escape sequences.........................4 3.3.2 Colors and attributes......................6 3.3.3 Cursor movement.........................6 3.3.4 Clearing commands.......................7 3.3.5 Screen scrolling..........................7 3.3.6 Cursor memory..........................7 3.4 System commands............................7 3.4.1 Query commands.........................8 3.4.2 Changing screen size.......................8 3.4.3 Factory reset...........................8 3.5 User input.................................8 4 WiFi configuration9 5 Useful links 10 1 Introduction The purpose of this document is to present the ESP8266 Wireless Terminal firmware and describe how the module can be interfaced by an external microcontroller. Ondřej Hruška Katedra měření, FEL ČVUT This document is divided into three sections: the first part explains the internal makeup of the module and it’s possibilities, then we move on to the supported control sequences and details of the communication protocol, and in the last part the wireless settings are discussed. 2 Feature overview The module implements a simple, VT100-compatible terminal emulator with a screen of up to 25x80 characters, controlled by ANSI escape sequences for col- ors, cursor movement and screen manipulation. It’s capable of displaying received characters, as well as receiving input from the keyboard or mouse and sending those back over the serial line. The user can access the terminal screen using their web browser thanks to a tiny built-in webserver, after connecting to the module over WiFi. -
Gnome Display Manager Reference Manual Martin K
Gnome Display Manager Reference Manual Martin K. Petersen [email protected] George Lebl [email protected] Brian Cameron [email protected] Bill Haneman [email protected] Table of Contents Terms and Conventions Used in This Manual ...............................................................3 Overview ................................................................................................................................3 Configuration.........................................................................................................................8 Controlling GDM ...............................................................................................................32 GDM Commands................................................................................................................38 Graphical Greeter Themes................................................................................................42 Accessibility.........................................................................................................................49 Example Configurations ....................................................................................................50 License...................................................................................................................................52 Terms and Conventions Used in This Manual This manual describes version 2.6.0.4 of the GNOME Display Manager. It was last updated on 7/14/2004. GDM - Gnome Display Manager. Used to describe the software package as