Common Language® in Mexico

Total Page:16

File Type:pdf, Size:1020Kb

Common Language® in Mexico data sheet common language® in Mexico the need for a consistent & the key is using a proven industry harmonized national data solution for naming all network infrastructure in Mexico elements The telecommunications sector in Mexico is rapidly iconectiv’s Common Language® Information changing with the introduction of regulations and Services is a telecommunications data infrastructure investment aimed both at increasing competition and management solution used by hundreds of in the industry and improving broadband access customers throughout the global telecommunication nationwide. The success of these new initiatives industry. Included in this group are Mexico’s reigning hinges on regulatory oversight, from monitoring incumbent and service providers throughout Canada rollout and tracking progress, to providing a and the U.S. In Mexico alone, over 16,000 network consistent framework for all players to report on their locations are already coded within the Common ongoing operations and coverage. Language global registry. Common Language provides a unique combination of software tools, To enable these actions, the Federal expertise, standards management and industry forum Telecommunications Institute (IFT) needs a consistent facilitation and direction to achieve a level of data and extensive data infrastructure across operator infrastructure management not possible in a single networks, systems, people and processes. service provider. Common Language is applicable to: success factors for IFT initiatives • Network Equipment Assets • Inside and Outside Plant Location Definition IFT needs to ensure a level playing field for participating service providers, through mandated • Connections, Circuits, Paths Definitions cost analysis that defines price ceilings for services • Service Definition and Standardization delivered by regional service providers. Consistent pricing results in an optimized network, which securing a harmonized view across adequately serves all segments of the market. Further, consistent pricing drives competition service providers through increased interconnections and effective co- Common Language is an established data location for improved service delivery. These actions infrastructure standard that brings order to telecom are critical for the success of the new initiatives to markets with many competing players. Through our increase competition and to promote broadband industry-leading single database solution, IFT can access to all consumers in a cost-effective manner. leverage Common Language solutions to harmonize Not having a consistent view across service providers views across a deployment and ensure the challenges will severely hamper the oversight required, are met so the stated goals can be achieved: introduce irregularities in reporting and lead to • Rollout progress at specific locations inconsistencies in measuring the effectiveness of and infrastructure tracking: Consistent the rollout - thereby preventing regulators from identification of exchange locations will enable obtaining an accurate view of progress made toward IFT to track rollout progress. Similarly, network reaching their goals. provider locations can be tracked and managed through consistent location identifiers. common language® in Mexico • Efficient interconnection and shared capacity The use of an efficient and informative coding method for broadband access: By adopting a common enables seamless interconnection among operators specification for facilitating connection requests, and fosters a competitive environment. Lengthy operators can seamlessly interconnect to deliver forms describing the location, the equipment used, services and provide consistent reporting to IFT the connectivity information and the services to be on interconnection points and available capacity provided are prone to errors due to duplication and for shared access. human error. iconectiv’s Common Language enables such forms to be replaced and automated by a series • Ensure level playing field and competitive of industry-adopted codes—eliminating the overhead environment: IFT can ensure fair play and of time and resources and enabling all players in the industry competition through a harmonized industry to collaborate efficiently. view of the industry that drives regulatory compliance, oversight of all players involved and enables insights to measure the success of ensuring success of the IFT established initiatives. initiatives A standardized, centralized, and field-proven data leveraging centralized data and infrastructure solution such as Common Language is automated communication the prerequisite for enabling competition. This spans from Local Loop Unbundling to the successful rollout Numerous systems make use of data relating and long-term viability of Mexico’s Plan Nacional de to physical addresses, equipment information, Banda Ancha (NBP), or National Broadband Plan, equipment use, circuit paths, circuit assignment, through: circuit use, service use and definition. Common Language removes the need to host the same • A dynamic communications market with data in multiple systems and instead provides a increased consumer choice centralized master copy of the data infrastructure. • Improved service delivery from consistent This single database approach reduces or eliminates pricing, efficient interconnections, and cost- data maintenance, duplication and error rates. effective equipment co-location Common Language ensures all players in the industry are using a consistent format to define • An accurate and easy-to-obtain regulatory view locations, equipment, services and connections of the rollout progress thanks to standardized thereby harmonizing the underlying entities that service provider reporting of network coverage describe a telecommunications network. and operations About iconectiv Make the connection. At iconectiv, we envision a world without boundaries, where the For more information about iconectiv, contact your ability to access and exchange information is simple, secure and local account executive, or you can reach us at: seamless. Our network and operations management, numbering, +1 732.699.6800 registry, fraud and revenue assurance, and messaging solutions enable the interconnection of networks, devices and applications [email protected] for more than 1,000 customers globally and one billion people www.iconectiv.com every day. iCOL-DS-CL-E-LT-001, September 2016 © 2016 Telcordia Technologies, Inc. dba iconectiv. All rights reserved. Telcordia and Common Language are registered trademarks and iconectiv, CLLI, CLFI, CLCI, NC/NCI, CLEI and USOC and FID are trademarks and intellectual property of Telcordia Technologies Inc. dba iconectiv (“iconectiv”)..
Recommended publications
  • Wired, Optical, and Wireless Communications Book
    Wired, Optical, and Wireless Communications Book Outside Plant Chapter What is the Outside Plant The first topic to consider is what is the outside plant? In general outside plant connections are those exterior to a building. Typically these are used to connect one building to another. This type of connection can be completed using wired media or a wireless connection. Standards and Codes Adherence to applicable standards and codes is required for any network construction project. A standard is used to provide guidelines for the type of material to use, as well as suggested installation practices. Notice that a standard is not a requirement. A standard is designed to achieve a basic level of performance. While it is true that many extant networks function without applying these standards, eventually they are overwhelmed by errors when the load on the network increases to a level such an ad hoc network cannot sustain. Troubleshooting is then very difficult. Time is wasted attempting to determine how the network was constructed. Codes were created to protect lives and property. Ignoring codes leads to legal liability at the least. Often work must be redone when an inspection reveals lack of compliance. A code is a requirement. The authority having jurisdiction or AHJ decides what codes to require. In most cases this will be a city government. Some areas, such as rural areas, may not have as many codes in their jurisdiction. Nevertheless, the commonly adopted codes should be adhered to, even if they are not required. An outside plant installation must be done following the applicable codes and standards in case of an accident or dispute.
    [Show full text]
  • 2012 Annual Report a Fortune 500 Company and One of the Nation’S Largest Cable Operators, Charter Communications, Inc
    TRIPLE PLAY CUSTOMER CHARTER GUARANTEE BUSINESS PHONE UNLIMITED CLOUD DRIVE INTERNET TV CALLING ONLINE MANAGER ON SECURITY SUITE DEMAND BANDWIDTH MOBILE APPS C h a r t HD er C Delivering More HD o m m u n TRIPLE PLAY i CUSTOMER ca BANDWIDTH t i GUARANTEE o n CHARTER s , ON I BUSINESS n DEMAND c UNLIMITED . CALLING 2 0 1 SECURITY 2 PHONE A SUITE TV n n u INTERNET a l R ONLINE e p o MANAGER r t CLOUD BANDWIDTH DRIVE MOBILE APPS 2012 Annual Report A Fortune 500 company and one of the nation’s largest cable operators, Charter Communications, Inc. provides advanced TV, Internet and telephone services to more than 5 million homes and businesses across 25 states. We connect our customers to the world through a high capacity superior network, advanced technologies and the unwavering commitment of our 17,800+ employees to delivering outstanding service. Charter currently offers more than 100 HDTV channels, 10,000+ video-on-demand titles, fully-featured telephone service and Internet speeds that are among the nation’s fastest. Our commercial services unit, Charter Business®, provides scalable, tailored and cost-effective communications solutions to businesses of all sizes, including Internet access, data networking, business telephone, video/music entertainment services and wireless backhaul. Charter Media® provides a full range of innovative advertising sales and pro- duction services. Charter is headquartered in Stamford, Connecticut and trades on the NASDAQ Stock Market under the symbol CHTR. For more information, please visit charter.com. Reaching More 4TH LARGEST CABLE PROVIDER SERVING MORE THAN 5 MILLION RESIDENTIAL AND COMMERCIAL CUSTOMERS IN 25 STATES SUPERIOR PLATFORM AND OFFERING Well positioned to compete with a powerful, two-way, high-capacity, interactive network PRODUCTS HD TV INTERNET PHONE Offering More In 2012, Charter continued to enhance our product set.
    [Show full text]
  • Understanding FTTH Architecture TOPOLOGY and COMPONENTS
    Understanding FTTH Architecture TOPOLOGY AND COMPONENTS TODD M. CORCORAN, RTPM, CFHP TECHNICAL PROGRAM MANAGER Q: What is meant by a Central Office or a Hut? A: The location where all major electronics for the system are housed for a given town. Q: What is topology? A: In a FTTH system, the word “topology” in is most often used with the physical fiber plant or Outside Plant (OSP). Q: What is splice closure or case? A: A fiber management product that protects and houses optical splices. Q: What is a PON? A: A PassiveUnderstanding Optical Network that distributes an optical signal from the CO to the customer. Q: What is Active Ethernet? A: A techniqueGeneral that uses Ethernet Terms (a data communications protocol) as the main transmission method over fiber optics with data rates up to 1 Gb/s. Q: What is meant by G-PON? A: Gigabit PON is a system that handles data rates up to 2.5 Gb/s. Q: What is meant by an OLT, ONT, and splitter? A: OLT - Optical Line Terminal, located in the CO or hut, is the interface to the customer and provides the subscribed services. ONT – Optical Line Terminal, located at the customer/subscribers location, converts the optical media being sent by the OLT. Splitter - A passive device that splits the light source in separate paths. Splice Fiber Cables for FTTx Closure Drop ONT • Single-mode fiber (SMF) is used in a FTTx application • Optical fiber is the transmission component of the ODN Feeder Cables – These cables are the main cable(s) being routed through a populated area.
    [Show full text]
  • Annex a Technical Standards for Outside Plant (OSP) Installations
    Annex A Technical Standards for Outside Plant (OSP) Installations www.citc.gov.sa Contents 1 Purpose and Scope…………………………………………………………………………………………..……………4 1.1 Purpose…………………………………………………………..…………………………………………........................4 1.2 Scope ………………………………..…………………………..……………….………………………….......................4 2 Definitions.……………………………………………………………………………………………………..…………….5 3 Technical Standards …………………………………….…………………………………………………..……………7 3.1 Network Design and Planning ……………………………………………….……………………….…………………7 3.2 Fiber Optic Standards……………....…………………………………..…………………………………….……………8 3.3 FOC Standards………………………...……………………………….…….………………………………….……………..9 3.3.1 Slack .………………..…………………………….………………………………….………….…………………………………9 3.4 Duct Standards………………....…………….……………………………….……….…………………………..………….9 3.4.1 Duct Numbering and Color Coding.….………………………………….…………………………………………11 3.4.2 Duct Laying ………………………………………………………………..…………….…………………...….………….12 3.4.3 Pre-formed Duct Bends ……………………………………………………………………..…………………………13 3.4.4 Protection Against Entry of Material ……………….….…………….………………………………………….14 3.4.5 Cleaning and Testing ……………………………………………..……….………………………………….………….14 3.4.6 Draw Rope……..…………………………………………………….………………………………….……………………15 3.4.7 Duct Seal ……………………….……………………...…………………….………………………………………….……15 3.4.8 Pulled Joints ………………………………………….…………………………………………….…………….……….….15 3.5 Minimum Number of Ducts and Fibers..……....….……………………………………………….….………….16 3.6 Manholes / Handholes Standa.………...……………………….……………………………….……………….…16 3.6.1 Manhole/Handhole Locations ………………….……………...………….…………………………………………17
    [Show full text]
  • FTTP Outside Plant
    FTTP Outside Plant Considerations and Case Study Analysis for the CATV Provider FTTP OSP Considerations for the MSO: 1. FTTP Market Drivers 2. FTTP Technologies 3. PON-Based Architectures and Components 4. A MSO Case Study 5. Summary Copyright © OFS 2008 Page 2 But First, Some Terminology: FTTx and FTTP Fiber-to-the-X. A generic industry term that is applied to: Fiber-to-the-Home Fiber-to-the-Business Fiber-to-the-Curb Fiber-to-the-Node Fiber-to-the-MDU Hybrid Fiber Coax Fiber-to-the-Premise. Applies to: Fiber-to-the-Home Fiber-to-the- (small) Business Fiber-to-the-MDU / Fiber-in-the-MDU Today’s topic is FTTP Copyright © OFS 2008 Page 3 FTTP Market Drivers Copyright © OFS 2008 Page 4 What are the reasons for FTTP? First cost CapEx parity with other wireline solutions Reduced Operating expenditures Futureproofing Unbundling relief Copyright © OFS 2008 Page 5 FTTP Cost Convergence with Competing Technologies First Cost per Subscriber 9000 8000 FTTP Cost 7000 FTTN/HFC Cost 6000 5000 4000 3000 2000 1000 0 1988 1990 1992 1994 1996 1998 2000 2002 2004 2006 2008 Source: OFS and Industry Data and estimates 1988 – 2000: Equipment and fibre cabling infrastructure innovation and volume 2000 – 2003: Cost innovation “dividend” resulting from R&D during the boom 2004 – 2008 + Volume deployments drive cost to equal copper Copyright © OFS 2008 Page 6 FTTH First Cost Cost per Subscriber 1400 Column 5 1200 1000 Electronics 800 $ 600 Electrical Passives 400 Optical 200 Passives 0 Labor FTTH FTTC FTTN HFC OFS Estimate Aerial Greenfield or Brownfield with no existing cable Buried about 50% higher cost vs.
    [Show full text]
  • FOA Technical Bulletin Guide to Fiber Optic Network Design
    The Fiber Optic Association, Inc. 1-760-451-3655 Fax 1-781-207-2421 Email: [email protected] http://www.foa.org FOA Technical Bulletin Guide To Fiber Optic Network Design Contents Page Part 1 Introduction 1 Part 2 Getting Started 3 Part 3 Copper, Fiber or Wireless? 5 Part 4 Choosing Transmission Equipment 7 Part 5 Planning The Route 9 Part 6 Choosing Components For Outside Plant Installations 11 Part 7 Choosing Components For Premises Installations 13 Part 8 The Link Power Budget 15 Part 9 Documentation 16 Part 10 Planning for the install 18 Part 11 Developing A Test plan 20 Part 12 Planning For Restoration 21 Part 13 Choosing A Contractor 23 Part 14 Managing The Project 26 Part 15 Maintaining The Network 27 Part 16 Cabling Standards 29 Part 1: Introduction What is “fiber optic network design?” Fiber optic network design refers to the specialized processes leading to a successful installation and operation of a fiber optic network. It includes determining the type of communication system(s) which will be carried over the network, the geographic layout (premises, campus, outside plant (OSP, etc.), the transmission equipment required and the fiber network over which it will operate. Next we have to consider requirements for permits, easements, permissions and inspections. Once we get to that stage, we can consider actual component selection, placement, installation practices, testing, troubleshooting and network equipment installation and startup. Finally, we have to consider documentation, maintenance and planning for restoration in event of an outage. Design requires working with higher level network engineers usually from IT ©2019, The FOA Inc.Design Guide.doc Dec/25/2018 (information technology) departments and cable plant designers such as the architects and engineers overseeing a major project, as well as contractors involved with building the projects.
    [Show full text]
  • Bell Laboratories Record Tomer Wishes
    THE PICTURE OF THE FUTURE The Bell System is about to add PICTURE- PHONE® service to the many services it now of- fers customers. A major trial of a Picturephone system is presently under way, and commercial service is scheduled for mid 1970. Because Pic- turephone service is a large undertaking that will have a profound effect on communications, the RECORD is pleased to be able to present this special issue describing the new system for our readers. Special issues have become an important part of the RECORD's continuing story of science and technology at Bell Labs. The first one, in June 1958, dealt with the transistor and marked the tenth anniversary of its invention at Bell Labs. Since then there have been special issues on the TELSTAR® project, No. 1 Ess, and integrated elec- tronics. In addition, there have been single-topic issues devoted to the N-3 and L-4 carrier trans- mission systems. We hope to continue to present such special issues from time to time as a way of highlighting subjects of special importance. Contents PAGE 134 PICTUREPHONE Service-A New Way of Communicating An introduction by Julius P. Molnar, Executive Vice President, Bell Telephone Laboratories. 136 PICTUREPHONE Irwin Dorros A broad view of the PICTUREPHONE system sets the stage for the more detailed discussions that f ollow. 142 Getting the Picture C. G. Davis The acceptance of PICTUREPHONE service depends largely on the equipment that people will see and use-the PICTUREPHONE set itself. 148 Video Service for Business J. R. Harris and R.
    [Show full text]
  • Adtell Integration Services Brochure (PDF)
    TOTAL COMMUNICATION SOLUTION Outside Plant (OSP) & Construction OSP Engineering & Installation Engineering & Design — EFI&T Rack & Stack Distributed Antenna System (DAS) Wireless Design & Consulting Network Optimization Emergency Response Site Survey & Documentation Support Maintenance Performance Monitoring Fiber Optic Training Managing your network so you don’t have to... p: 610-340-3180 www.adtellintegration.com [email protected] 1010001011110101000101111110100011000001010001100001101000110001001010110100010111101010001 0111111010001100000101000110000110100011000100101011010001011110101000101111110100011000001What We Do 0100011000011010001100010010101101000101111010100010111111010001100000101000110000110100011 0001001010110100010111101010001011111101000110000010100011000011010001100010010101101000101 1110101000101111110100011000001010001100001101000110001001010110100010111101010001011111101 0001100000101000110000110100011000100101011010001011110101000101111110100011000001010010010About Adtell Integration 1011010001011110101000101111110100011000001010001100001101000110001001010110100010010010010 Part of the Adtell Group Adtell Integration is a member of the Adtell Group, a collection of fiber optic communications companies working together to achieve a common goal — bringing you the best products and services in the industry. The Adtell Group consists of FiberOptic.com (a fiber optic software, rental, distribution and training company), Precision Rated Optics (manufacturer of fusion splicers and test & measurement devices)
    [Show full text]
  • Appendix 3: Handbook on Telecommunication Outside Plant in Areas Frequently Exposed to Natural Disasters
    Q22-1/2: Utilization of telecommunications/ICTs for disaster preparedness, mitigation and response Appendix 3: Handbook on Telecommunication Outside Plant in Areas Frequently Exposed to Natural Disasters I n t e r n a t i o n a l T e l e c o m m u n i c a t i o n U n i o n ITU HANDBOOK ON TELECOMMUNICATION OUTSIDE PLANTS IN AREAS FREQUENTLY EXPOSED TO NATURAL DISASTERS (online edition 2013) Q22-1/2: Utilization of telecommunications/ICTs for disaster preparedness, mitigation and response Table of Contents Page Table of Contents ........................................................................................................................ 2 Chapter 1: Natural disasters and their management ..................................................................... 7 1 Introduction ...................................................................................................................... 7 1.1 Hazards/emergencies/disasters/catastrophes ................................................................. 7 1.2 Natural hazards: types, intensity, caused damages and critical areas/countries ............. 8 1.2.1 Meteorological hazards ......................................................................................... 9 1.2.2 Hydrological hazards .............................................................................................. 13 1.2.3 Geological hazards ................................................................................................. 15 1.3 Disaster management activities ......................................................................................
    [Show full text]
  • New Dover High School Dover, Delaware
    Project Manual – Volume I For Bid Pac H-1 Re-Bid New Dover High School Dover, Delaware EDiS Company, Inc. Becker Morgan Group, Inc. ABHA Architects Capital School District June 5, 2013 Capital School District New Dover High School Bid Package ‘H‐1’ TABLE OF CONTENTS ‐ VOLUME 1 Division 0 ‐ Bidding and Contract Requirements 00 01 10 Table of Contents 00 01 15 List of Drawings 00 11 13 Advertisement for Bids 00 21 13 Instructions to Bidders 00 31 28 Conductivity Well Test Report 00 41 00 Bid Forms Including: Sub Listing Bid Bond Non‐Collusion Statement Consent of Surety 00 52 00 Agreement Forms 00 61 13 Performance and Payment Bond Forms 00 62 16 Certificate of Insurance 00 72 00 General Conditions 00 73 00 Supplementary Conditions 00 73 43 Wage Rate Requirements Division 01 ‐ General Requirements 01 11 00 Summary of Work 01 21 00 Allowances 01 22 00 Unit Prices 01 23 00 Alternates 01 26 00 Change Order Procedures 01 26 13 Contractor Compensation 01 29 00 Payment Procedures 01 31 13 Project Coordination Meetings 01 31 16 BIM Modeling Coordination Drawing Guidelines 01 31 19 Pre‐installation Meetings 01 31 25 Web Based Project management System 01 32 16 Construction Progress Schedule 01 32 19 Submittals Register 01 32 26 Contractors Daily Reports 01 33 00 Submittal Procedures 01 35 00 Contractor Employee Background Check 01 35 23 Safety Program 01 45 00 Quality Control 01 51 13 Temporary Electricity 01 51 23 Temporary Heating, Cooling, and Ventilating 01 52 00 Construction Facilities & Temporary Controls 01 62 00 Material and Equipment 01
    [Show full text]
  • Connect to Wavelength Management
    Connect to wavelength management As consumers purchase more and more devices (cell phones, televisions, laptops, etc.) communication networks supporting these devices need to evolve to supply enough bandwidth for the increasing demand. One of the leading technologies allowing network operators to increase network density while leveraging current infrastructure is wavelength-division multiplexers (WDM). The WDM devices are placed within fiber optic hardware solutions which are typically located within the central office, headend, and the outside plant (OSP). As networks continue to evolve, WDM solutions become critical in maximizing the density and functionality required for modern optical distribution networks. You may ask, how do WDM solutions work? Similar to how prisms break out the visible light spectrum, WDM devices combine or break out wavelengths on a single fiber, enabling you to maximize fiber usage. A multiplexer (mux) combines these wavelengths over the fiber. A demultiplexer (demux) takes the combined wavelengths separating these into the individual signals. Therefore, a mux and demux are used to transmit and receive wavelengths between devices to exploit the full range of capabilites of the fiber within the network. Corning Optical Communications xWDM Series Brochure | CRR-946-AEN | Page 1 WDM Device Individual wavelengths, carrying different services and data, are either combined or separated with the use of a WDM, which has a series of thin-film filters inside (Photo 1). Photo 1: Thin-Film Filter The filters are tuned to allow specific bands of light (entered through the common port) to pass through (via the add/drop port) or be reflected off (via the reflect port) shown in Figure A.
    [Show full text]
  • Location Information Services CLLI™
    TruOps Common Language location information services CLLI™ Consistently and accurately defining a location is Simple differences such naming Main Street as Main important when communicating between individuals, St. or where a single location has multiple names departments and companies. Ordering, provisioning, can cost a service provider thousands in errors and interconnection and servicing are key areas requiring correcting those errors. the accurate description of a location, often not Managing location information is more than just satisfied with GPS coordinates or street addresses. describing an address. The type of location, ensuring Frequently, companies believe they can make do with it is uniquely described internally and between their own representation of a location only to find their other companies, the use of that location and the management of locations has become an expensive, equipment available there are used for tracking and complex affair, with numerous entries for the same running a complex business. Through the discipline place, different interpretations of a location and either and experience of iconectiv® TruOps Common not enough information, or too many versions of the Language® the management of the locations same information, to fulfill a task. becomes efficient, allowing the service provider to When interconnecting between service providers, a concentrate on delivering services to their customers. service provider’s point-of-interface (POI) needs to be communicated in a clear, unambiguous form. With a single street having multiple names, this can be a challenge. Without a uniform approach to location identification, automating the process of interconnection or communicating location is near Defining a location is important impossible, forcing stakeholders to manually identify Not satisfied with GPS coordinates and quality check location information.
    [Show full text]