DOCSLIB.ORG

Tomato Juice Powder Yeast & Mould (Cfu/G) Max

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Tomato Juice Powder Yeast & Mould (Cfu/G) Max Powders Product Specifica�on Appearance Dark reddish orange coloured powder free from hard lumps & extraneous ma�er Taste & odour Typical of Anna�o Colour Anna�o red colour pH of 10% solu�on 8.0 to 10.0 Quality Parameters Microbiological TPC (cfu/g) max. 10000 E. coli Absent in 1 gm Annatto Powder Coliforms Absent in 1 gm Yeast & Mould (cfu/g) max. 100 अ�ा�ो पाउडर Salmonella Absent in 25 gm Application: Colouring Agent 114 Product Specifica�on Appearance Ripe Banana creamish white powder free from hard lumps & extraneous ma�er Taste & Odour Typical ripe of ripe banana Colour Creamish white Quality Parameters Microbiological TPC (cfu/g) max. 10000 E. coli Absent in 1 gm Coliforms Absent in 1 gm Ripe Banana Powder Yeast & Mould (cfu/g) max. 100 Salmonella Absent in 25 gm पके केले का पाउडर Application: Food Powder 115 Product Specifica�on Appearance Beetroot red purple powder free from hard lumps & extraneous ma�er Acidity Max. 3 % pH of 10% solu�on 3.5-4.5 Color Strength (of 0.1% solu�on 0.4 – 0.5 using 4.5pH buffer) at 535nm Betanin Content 0.35 - 0.45 Quality Parameters Microbiological TPC (cfu/g) max. 10000 E. coli Absent in 1 gm Beetroot Juice Coliforms Absent in 1 gm Yeast & Mould (cfu/g) max. 100 Powder Salmonella Absent in 25 gm Application: Food Powder चुकंदर रस पाउडर : Natural Colour 116 Product Specifica�on Appearance Caramel dark brown powder free from hard lumps & extraneous ma�er Taste & Odour Bi�er taste with burnt sugar odor Colour Caramel dark brown Color Strength (of 0.1% 0.100 - 0.125 solu�on W/V) at 620 nm Quality Parameters Microbiological TPC (cfu/g) max. 10000 E. coli Absent in 1 gm Coliforms Absent in 1 gm Caramel Powder Yeast & Mould (cfu/g) max. 100 कैरमेल Salmonella Absent in 25 gm Application: Food Powder 117 Product Specifica�on Appearance Off white to cream colored powder free from hard lumps & extraneous ma�er Taste & odour Typical Cheese Acidity Maximum 3.0 % pH 5.0 -6.0 Quality Parameters Microbiological TPC (cfu/g) max. 10000 E. coli Absent in 1 gm Cheese Powder Coliforms Absent in 1 gm Yeast & Mould (cfu/g) max. 100 पनीर पाउडर Salmonella Absent in 25 gm Application: Food Powder 118 Product Specifica�on Appearance Off white colored powder free from hard lumps & extraneous ma�er Taste & odour Typical of Honey Total Acidity Maximum 2.0 % pH of 10 % solu�on 4.5 – 5.5 Quality Parameters Microbiological TPC (cfu/g) max. 10000 E. coli Absent in 1 gm Honey Powder Coliforms Absent in 1 gm Yeast & Mould (cfu/g) max. 100 शहद पाउडर Salmonella Absent in 25 gm Application: Food Powder 119 Product Specifica�on Appearance Lemon creamish, white color powder free from hard lumps & extraneous ma�er Acidity max. 35% Quality Parameters Microbiological TPC (cfu/g) max. 10000 E. coli Absent in 1 gm Lemon Juice Powder Coliforms Absent in 1 gm Yeast & Mould (cfu/g) max. 100 Salmonella Absent in 25 gm न�बू रस पाउडर Application: Food Powder 120 Product Specifica�on Appearance Ripe mango light yellow powder free from hard lumps and extraneous ma�er Taste & Odour Typical ripe mango Colour Light yellow Quality Parameters Microbiological TPC (cfu/g) max. 10000 E. coli Absent in 1 gm Coliforms Absent in 1 gm Mango Pulp Powder Yeast & Mould (cfu/g) max. 100 आम पाउडर Salmonella Absent in 25 gm Application: Fruit Powder 121 Product Specifica�on Appearance Pineapple light yellow powder free from hard lumps & extraneous ma�er Acidity Max. 3.5 % Quality Parameters Microbiological TPC (cfu/g) max. 10000 E. coli Absent in 1 gm Pineapple Juice Coliforms Absent in 1 gm Yeast & Mould (cfu/g) max. 100 Powder Salmonella Absent in 25 gm अननस रस पाउडर Application: Food Powder 122 Product Specifica�on Appearance Pinkish purple colored powder free from hard lumps & extraneous ma�er Taste & Odour Typical of fresh ripe pomegranate Acidity Maximum 3.0 % Quality Parameters Microbiological TPC (cfu/g) max. 10000 E. coli Absent in 1 gm Coliforms Absent in 1 gm Pomegranate juice Yeast & Mould (cfu/g) max. 100 Powder Salmonella Absent in 25 gm अनार रस पाउडर Application: Food Powder 123 Product Specifica�on Appearance Strawberry pink color powder free from hard lumps & extraneous ma�er Taste & odour Typical ripe strawberry Colour Strawberry pink Acidity Max. 7 % Quality Parameters Microbiological TPC (cfu/g) max. 10000 E. coli Absent in 1 gm Strawberry Juice Coliforms Absent in 1 gm Yeast & Mould (cfu/g) max. 100 Powder Salmonella Absent in 25 gm ��ॉबेरी रस पाउडर Application: Food Powder 124 Product Specifica�on Appearance Tamarind light brown color powder free from hard lumps & extraneous ma�er Acidity 9.0 - 12.0 % pH of 10% solu�on 2.0 - 3.0 Quality Parameters Microbiological TPC (cfu/g) max. 10000 E. coli Absent in 1 gm Tamrind Pulp Powder Coliforms Absent in 1 gm Yeast & Mould (cfu/g) max. 100 Salmonella Absent in 25 gm इमली का पाउडर Application: Food Powder 125 Product Specifica�on Appearance Tomato red powder free from hard lumps & extraneous ma�er Taste & Odour Typical of fresh ripe tomatoes Colour Tomato red colour pH of 15% solu�on 3.4 to 4.2 Acidity max. 8.0% Quality Parameters Microbiological TPC (cfu/g) max. 10000 E. coli Absent in 1 gm Coliforms Absent in 1 gm Tomato Juice Powder Yeast & Mould (cfu/g) max. 100 Salmonella Absent in 25 gm टमाटर रस पाउडर Application: Food Powder 126 [email protected] | www.foodsandinns.com Foods & Inns Ltd. Corporate Address: 224, Dulwich House, Tardeo Road, Mumbai 400007 | +91-22-23533104 Registered Address: Udyog Bhavan, 2nd Floor, 29 Walchand Hirachand Marg, Ballard Estate, Mumbai 400038.
Load more

Recommended publications
  • Effect of Powder and Target Properties on Food Powder
    EFFECT OF POWDER AND TARGET PROPERTIES ON FOOD POWDER COATING AND COMPARISON OF SOLID-LIQUID SEPARATION (SLS) AND VACUUM CONCENTRATION OF TOMATO JUICE DISSERTATION Presented in Partial Fulfillment of the Requirements for the Degree Doctor of Philosophy in the Graduate School of The Ohio State University By Nutsuda Sumonsiri, B.S. Graduate Program in Food Science and Technology The Ohio State University 2012 Dissertation Committee: Dr. Sheryl A. Barringer, Advisor Dr. V.M. (Bala) Balasubramaniam Dr. John Litchfield Dr. Melvin Pascall © Copyright by NUTSUDA SUMONSIRI 2012 ABSTRACT Tapioca starch, NaCl (28, 135, and 378 μm), corn starch, cocoa powder, soy protein isolate, cheese powder, wheat protein, modified starch, nacho cheese, and sugar were coated at 0 kV for nonelectrostatic and at 25 kV for electrostatic coating onto metal, wood, unoiled paper, oiled paper, unoiled plastic, oiled plastic, fresh bread, and dry bread. Powders and targets were allowed to naturally tribocharge, or all charge was removed before coating. Powder particle size, flowability, resistivity, and target resistivity were reported. Electrostatic coating produced the same or better wrap around, or percent side coverage as nonelectrostatic coating for every powder and target. The greatest electrostatic improvement was found when using powders that had the worst nonelectrostatic side coverage: large particle size (>135 μm), low resistivity, and low cohesiveness, especially on targets that had high-surface resistivity (2 x 105 Ωm). Tribocharging had a similar effect as electrostatic coating. In both nonelectrostatic and electrostatic coating, percent side coverage increased as powder particle size decreased, cohesiveness increased, or target resistivity decreased. In electrostatic coating, percent side coverage increased as powder resistivity increased; however, in nonelectrostatic coating, as powder resistivity increased, percent side coverage increased on only oiled plastic and dry bread.
    [Show full text]
  • Pdf.Pdf> August (2008)
    Pure Appl. Chem., Vol. 83, No. 8, pp. 1567–1617, 2011. doi:10.1351/PAC-REP-10-07-02 © 2011 IUPAC, Publication date (Web): 7 March 2011 State diagrams for improving processing and storage of foods, biological materials, and pharmaceuticals (IUPAC Technical Report)* Maria Pilar Buera1,‡, Yrjö Roos2, Harry Levine3, Louise Slade3, Horacio R. Corti1, David S. Reid4, Tony Auffret5, and C. Austen Angell6 1Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Int. Cantilo s/n. Pabellón II Ciudad Universitaria, Buenos Aires, Argentina; 2School of Food and Nutritional Sciences, University College, Cork, Ireland; 3Food Polymer Science Consultancy (retired from Cereal Science, Kraft-Nabisco) Morris Plains, NJ 07950, USA; 4Department of Food Science and Technology, University of California at Davis, 1 Shields Avenue, Davis, CA 95616-8571, USA; 5taPrime Consulting, Sandwich, Kent, CT13 9JA, UK; 6Department of Chemistry, Arizona State University, Tempe, AZ 85287, USA Abstract: Supplemented temperature/composition phase diagrams include the non-equilib- rium glass-transition temperature (Tg) curve and equilibrium ice-melting and solubility curves. The inclusion of the non-equilibrium curve allows one to establish relationships with the time coordinate and, thus, with the dynamic behavior of systems, provided that the ther- mal history of such systems is known. The objective of this report is to contribute to the potential applications of supple- mented state diagrams for aqueous glass-formers, in order to describe the influence of water content, nature of vitrifying agents, and temperature on the physico-chemical properties of foods and biological and pharmaceutical products. These data are helpful to develop formu- lations, processing strategies, or storage procedures in order to optimize the stability of food ingredients and pharmaceutical formulations.
    [Show full text]
  • Food Powder Processing – Ortega-Rivas, E
    FOOD ENGINEERING – Vol. III - Food Powder Processing – Ortega-Rivas, E. FOOD POWDER PROCESSING Ortega-Rivas, E. Graduate Program in Food Science and Technology, University of Chihuahua, Mexico Keywords: Particle technology, food processing, comminution, attrition, mixing, screening, cyclone separation, solids classification, agglomeration, compaction, dehydration, reconstitution Contents 1. Introduction: Applied Powder Technology to Food Materials 2. Comminution 2.1. Principles of Size Reduction; Properties of Comminuted Products 2.2. Energy Requirements: Comminution Laws 2.3. Size Reduction Equipment: Features and Operation 2.4. Criteria for Selection of Comminution Processes 3. Attrition 3.1. Mechanisms of Attrition 3.2. Kinetics of the Attrition Process 3.3. Compaction Characteristics and the Fractal Approach 4. Mixing 4.1. Introduction: Statistical Approach to Solids Mixing 4.2. Mixing Mechanisms−Segregation 4.3. Assessment of Mixing Processes: Mixing Index 4.4. Powder Mixers 5. Separation and Classification 5.1. Sieving and Screening 5.2. Dedusting Technology: Cyclones and Filters 5.3. Air Classification 6. Agglomeration and Growth 6.1. Introduction: Size Enlargement Processes 6.2. Aggregation Fundamentals: Strength of Agglomerates 6.3. Agglomeration Methods 7. Drying andUNESCO Reconstitution – EOLSS 7.1. Powder Dryers: Fluidized Bed Dryers and Spray Dryers 7.2. Reconstitutability of Dried Powders 8. Conclusion and Further Trends AcknowledgementsSAMPLE CHAPTERS Glossary Bibliography Biographical Sketch Summary Process and design aspects of unit operations involving particulate solids applied to foods are discussed. Theoretical considerations, operating principles, and applications of different techniques used to process powders in the food industry are reviewed. This ©Encyclopedia of Life Support Systems (EOLSS) FOOD ENGINEERING – Vol. III - Food Powder Processing – Ortega-Rivas, E.
    [Show full text]
  • Feeding Your Food Business with Unrivaled Ingredient Solutions
    feeding your food business with unrivaled ingredient solutions. 844-441-FOOD | [email protected] 2017–2018 FOOD INGREDIENT CATALOG "i want ADM’s unparalleled portfolio of ingredients makes us the right fi rst-call experts with ingredients partner. Whether you’re looking for single ingredients, blends or turnkey solutions, we can help you get to market faster with consumer- a growing preferred foods and drinks. Whatever your ingredient need – nutrition, performance, texture or taste – turn to ADM to feed your food business. portfolio of We have the resources to set you apart. ingredients to meet my evolving demands." 844-441-FOOD | [email protected] Table of Contents 8 Product Applications 34 Non-GMO and Organic Products “i want 36 Acidulants 37 Alcohols 38 Antioxidants on-trend 39 Bakery Mixes, Fillings and Icings 40 Beans and Pulses ingredients to 43 Colors 44 Emulsifiers and Stabilizers satisfy demands 46 Flavors, Extracts and Distillates 52 Flours and Ancient Grains in nutrition, 59 Fruits - Dried 60 Nutrition and Health 63 Nuts and Seeds texture, function 66 Oils and Fats 72 Proteins and taste.” 78 Starches 79 Sweeteners and Sweetening Solutions 86 Product Index 4 844-441-FOOD | [email protected] 5 "how can i solve for today’s most pressing food innovation demands?” In this ever-evolving food culture, ADM is at-the-ready with the most on-trend, expansive portfolio and the know-how to work alongside you to create foods and drinks consumers love. Our protein, sweetener, color and fl avor advisors can serve as an extension of your own resources to help you get to market faster with on-trend eating and drinking experiences.
    [Show full text]
  • Effect of Moisture Content on the Grinding Process and Powder Properties in Food: a Review
    processes Review Effect of Moisture Content on the Grinding Process and Powder Properties in Food: A Review Hwabin Jung, Youn Ju Lee and Won Byong Yoon * ID Department of Food Science and Biotechnology, College of Agriculture and Life Sciences, Kangwon National University, Kangwondaehak-gil, Chuncheon, Gangwon 24341, Korea; [email protected] (H.J.); [email protected] (Y.J.L.) * Correspondence: [email protected]; Tel.: +82-33-241-0508 Received: 28 April 2018; Accepted: 21 May 2018; Published: 1 June 2018 Abstract: Grinding is a staple size-reduction process to produce food powders in which the powdered form is chemically and microbiologically stable and convenient to use as end products or intermediate products. The moisture content of food materials before grinding is a particularly important factor, since it determines the materials’ physical properties and the powder properties, such as flowability after grinding. Generally, the moisture content of food materials is closely related to its energy requirement for grinding, because the energy expenditure required to create new surfaces varies. Grinding models used to analyze and predict the grinding characteristics, including energy, have been developed in many studies. The moisture content also influences powder flow properties. The inter-particle liquid bridges among the particles are due to the moisture in powders; therefore, the flowability of powders is interrupted because of the increase of the cohesiveness of the powder. Understanding the grinding characteristics related to various moisture contents is, theoretically and experimentally, an important cornerstone in optimizing the grinding processes used in food industries. In this review, comprehensive research of the effect of moisture content on the grinding process and powder properties is presented.
    [Show full text]
  • Influence of Maltodextrin and Spray Drying Process Conditions on Sugarcane Juice Powder Quality
    Influence of Maltodextrin and Spray Drying Process Conditions on Sugarcane Juice Powder Quality Influencia de la Maltodextrina y Condiciones del Proceso de Secado por Aspersión en la Calidad del Polvo de Jugo de Caña Panelera Esteban Largo Ávila1; Misael Cortés Rodríguez2 and Héctor José Ciro Velásquez3 Abstract. Food powder liquid extracts obtained from fruits and Resumen. Polvos alimentarios de extractos líquidos obtenidos a vegetables can be manufactured using spray drying technologies partir de frutas y vegetales pueden ser manufacturados usando while maintaining the quality attributes that are required by the tecnologías de secado por aspersión y mantener los atributos industrial sector. The aim of this study was to evaluate the effect de calidad requeridos en el sector industrial. El objetivo de este of maltodextrin and spray drying process conditions on sugarcane estudio fue evaluar el efecto de la adición de maltodextrina y las juice powder. A central composite design was used with a response condiciones de procesamiento por secado por aspersión en la surface analysis of four factors: (A) maltodextrin (10-20%), (B) obtención de polvo de jugo de caña. Un diseño central compuesto inlet air temperature (130-150 °C), (C) outlet air temperature (75- y análisis mediante superficies de respuesta con cuatro factores 85 °C) and (D) atomization speed (22,000–26,000 rpm). Moisture, estadísticos fue establecido: (A) maltodextrina (10-20%), (B) hygroscopicity, solubility, effective recovery and formation of temperatura del aire de secado a la entrada (130-150 °C), (C) deposits on the walls presented significant differences (P<0.05) temperatura del aire a la salida (75-85 °C) y (D) velocidad del with respect to all factors, while, for water activity, no statistical disco atomizador (22.000–26.000 rpm).
    [Show full text]
  • Kemutec Food Powder Processing Solutions
    Food Powder Processing Solutions » Sifting and Screening » Milling and Grinding » Mixing and Blending 02 Food Powder Processing Solutions Food Powder Processing Solutions 03 YOUR WORLDWIDE FOOD HOW WE ADD INTEGRATE HIGH-QUALITY PROCESSING PARTNER EXTRA VALUE SCHENCK PROCESS SYSTEMS Our teams at Kemutec engineer and MATERIAL TESTING Supporting a variety of customize, high quality process solutions KEY FOOD APPLICATIONS bulk-handling industries: We offer material and process testing in for powders used in the food industries, FOR KEMUTEC INCLUDES: a number of global Technology Centres. » Bulk bag loading and unloading as well as chemicals and pharmaceuticals. Through years of in-depth analysis, we » Batch and continuous feeders Kemutec proudly became part of » Flour sifting have gathered a significant amount of the Schenck Process Group, a global » Weighing solutions » Sugar grinding knowledge, which helps us optimize manufacturer of bulk material handling » Continuous dense and dilute processes and customize the design of products and systems, in 2018. » Dairy powder densification phase conveyors all Kemutec solutions, to suit our client’s » Cocoa mixing » Mechanical conveyors Kemutec solutions include equipment for application and desired outcome » Cookie rework Size Classification and Screening, Size » Vibrating screens with condition All our test centres are equipped to Reduction, as well as Mixing and Blending » Starch densification monitoring allow for remote involvement with our technologies. Well-known and trusted » Vital wheat gluten milling » Plant and logistical control systems customers, such as live streaming, or brands from the Kemutec range, include » Potato flake milling you are welcome to visit and witness the » Truck and train loading KEK, Gardner and PPS.
    [Show full text]
  • Spray Drying of Probiotic Bacteria: from Molecular Mechanism to Pilot-Scale Productio Song Huang
    Spray drying of probiotic bacteria: From molecular mechanism to pilot-scale productio Song Huang To cite this version: Song Huang. Spray drying of probiotic bacteria: From molecular mechanism to pilot-scale productio. Food and Nutrition. AGROCAMPUS OUEST, 2017. English. tel-02791240 HAL Id: tel-02791240 https://hal.inrae.fr/tel-02791240 Submitted on 5 Jun 2020 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Distributed under a Creative Commons Attribution - ShareAlike| 4.0 International License RÉSUMÉ ABSTRACT Séchage par atomisation des bactéries probiotiques : des méca- Spray drying of probiotic bacteria: From molecular mechanism nismes de protection à la production à l’échelle pilote to pilot-scale production Les probiotiques sont des microorganismes vivants qui, ingérés Probiotics are live microorganisms that, when administered in en quantité suffi sante, exercent des effets positifs sur la santé. adequate amounts, confer a health benefi t on the host. Freeze La lyophilisation est aujourd’hui questionnée quant à sa consom- drying, the reference drying method, is currently challenged mation d’énergie et son caractère discontinu. S’il offre une al- because of its low energy-effi ciency and productivity. Therefore, ternative pour produire massivement des poudres probiotiques spray drying is expected to be an alternative and sustainable à faible coût, le séchage par atomisation induit quant à lui des method for producing probiotic powders.
    [Show full text]
  • The Changes in Food Coating Characteristics During Coating a Powder Mixture And
    The Changes in Food Coating Characteristics during Coating a Powder Mixture and Salting Potato Chips Nonelectrostatically and Electrostatically Dissertation Presented in Partial Fulfillment of the Requirements for the Degree Doctor of Philosophy in the Graduate School of The Ohio State University By Teerarat Likitwattanasade, M.S. Graduate Program in Food Science and Technology The Ohio State University 2015 Dissertation committee: Sheryl A. Barringer, Advisor Luis Rodriguez-Saona Valente Alvarez V.M. (Bala) Balasubramaniam Copyright by Teerarat Likitwattanasade 2015 i Abstract Changes in coating characteristics, when powder mixtures and extra fine NaCl were coated nonelectrostatically and electrostatically, were determined in this study. Mixtures contained powders of two different compositions or two different sizes of one composition, of common food ingredients such as salts, sugar, starch, proteins, and maltodextrin were coated at 0 and -25 kV on aluminum targets. The separation and dustiness after coating the mixtures were determined. Extra fine NaCl was also coated individually at 0-95 kV onto potato chips by different coating systems to investigate which system provides better transfer efficiency, more even distribution and lower amount of dust. When the mixtures were coated, separation occurred in most mixtures. In the mixtures containing the same size powders but different composition, differences in individual transfer efficiency of powders was the greatest cause of separation. Moreover, interactions between the powders during coating generally decreased the separation. In the mixtures of the powders containing the same composition but different size powders, the differences in individual transfer efficiency was also a cause of separation. Interactions between the powders generally increased the separation.
    [Show full text]
  • Influence of the Process Parameters and Sugar Granulometry on Cocoa
    Journal of Food Engineering 97 (2010) 283–291 Contents lists available at ScienceDirect Journal of Food Engineering journal homepage: www.elsevier.com/locate/jfoodeng Influence of the process parameters and sugar granulometry on cocoa beverage powder steam agglomeration F.Z. Vissotto a,*, L.C. Jorge a, G.T. Makita a, M.I. Rodrigues b, F.C. Menegalli b a Cereal and Chocolate Technology Center (CEREAL CHOCOTEC), Institute of Food Technology (ITAL), Caixa Postal 139, CEP 13070-178, Campinas, S.P., Brazil b Department of Food Engineering (DEA), School of Food Engineering (FEA), University of Campinas (UNICAMP), CEP 13083-970, Campinas, S.P., Brazil article info abstract Article history: The objective of this research was to evaluate the effects of the steam agglomeration process variables on Received 30 March 2009 the characteristics of cocoa beverage powders. A pilot scale agglomerator was used in the tests. For the Received in revised form 5 October 2009 cocoa beverage powder formulated with granulated sugar, most common commercial product, the Accepted 11 October 2009 increase in solids feed rate (400–700 g/min) led to a decrease in the mean particle diameter (400 g/min Available online 24 November 2009 – 564.70 lm, 700 g/min – 438.40 lm) and an increase in the dryer rotation (12–52 rpm) led to an increase in the product moisture (12 rpm – 1.52% w.b., 52 rpm – 1.88% w.b.). The changing from 1.0  102 to Keywords: 1.8  102 kPa of the vapor pressure resulted in an increase in moisture of the cocoa beverage powder Steam agglomeration (1.0 102 kPa – 1.46% w.b., 1.8 102 kPa – 1.94% w.b.) and the intensification of the yellow color of the Cocoa beverage powder   2 2 Powder product (1.0  10 kPa – 14.51, 1.8  10 kPa – 15.17).
    [Show full text]
  • Vacuum Belt Dried Apple Pomace Powder As a Value-Added Food
    VACUUM BELT DRIED APPLE POMACE POWDER AS A VALUE-ADDED FOOD INGREDIENT by HUITONG YAN (Under the Direction of William L. Kerr) ABSTRACT Three temperatures (80, 95, and 110˚C) were employed to dry apple pomace using vacuum belt dryer. Color, hygroscopicity, flowability and particle size were compared between three ground powder samples. Moisture isotherms were developed, and glass transition temperatures were measured at different water activities. In addition, total phenolics, anthocyanin and fiber content were quantified, and the results were compared to those of fresh apple and raw apple pomace. There was no significant difference in terms of color, hygroscopicity, and total phenolics content between the pomace dried at 80 ˚C and 95˚C, while the pomace dried at 110 ˚C had significant differences. When compared to fresh apple pomace, no significant differences were found between the samples and the apple pomace in terms of total phenolics and anthocyanin contents. Key words: apple pomace, dietary fiber, powder, total phenolic content, vacuum belt drying VACUUM BELT DRIED APPLE POMACE POWDER AS A VALUE-ADDED FOOD INGREDIENT by HUITONG YAN B.S., Liaocheng University, China, 2010 A Thesis Submitted to the Graduate Faculty of The University of Georgia in Partial Fulfillment of the Requirements for the Degree MASTER OF SCIENCE ATHENS, GEORGIA 2012 © 2012 Huitong Yan All Rights Reserved VACUUM BELT DRIED APPLE POMACE POWDER AS A VALUE-ADDED FOOD INGREDIENT by HUITONG YAN Major Professor: William L. Kerr Committee: Ronald B. Pegg Fanbin Kong Electronic Version Approved: Maureen Grasso Dean of the Graduate School The University of Georgia May 2012 DEDICATION For my family.
    [Show full text]
  • Influence of Particle Size on Physical and Sensory Attributes of Mango Pulp Powder
    IINNNTTTEEERRRNNNAAATTTIIIOOONNNAAALL AAgggrrroooppphhhyyysssiiicccss www.international-agrophysics.org Int. Agrophys., 2013, 27, 323-328 doi: 10.2478/intag-2013-0001 Influence of particle size on physical and sensory attributes of mango pulp powder M. Sharma*, D.M. Kadam, S. Chadha, R.A. Wilson, and R.K. Gupta Central Institute of Post- Harvest Engineering and Technology (CIPHET), PO: PAU Campus, Ludhiana-141004, Punjab, India Received February 15, 2012; accepted December 7, 2012 A b s t r a c t. The present investigation was aimed to observe and controlling particle size distribution in the raw material the effect of particle size on physical, sensory and thermal pro- can be critical to the success of today food manufacturing perties of foam-mat dried mango pulp powder. Mango pulp of process. Differences in particle size can lead to stratification Dussehri variety was foam-mat dried using 3% egg white at 65°C. of the powder with the higher solids concentrated at the top Dried foam-mats were pulverized and passed through a sieve shaker for obtaining three grades of powder with 50, 60, and 85 which will affect reconstitution of the dry product. The sha- mesh size sieves. The particle size of these samples measured using pe and size of particles will affect the closeness of the par- laser diffraction particle size analyzer ranged from 191.26 to ticle pack, which in turn will affect the powder bulk density. 296.19 µm. The data was analysed statistically using ANOVA of In tropical and subtropical countries, an enormous SAS. There was a linear increase in lightness (‘L’ value) with a de- amount of fruits and vegetables are produced which are ex- crease in particle size, however, ‘a’ value decreased with a decrea- tremely attractive from a commercial point of view, a typical se in particle size, indicating the decrease in redness.
    [Show full text]