DOCSLIB.ORG

Pictorial Index for Safety and Security 2 Instrument Cluster Operation Of

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Pictorial Index for Safety and Security 2 Instrument Cluster Operation Of Pictorial index Search by illustration For safety 1 Make sure to read through them and security How to read the gauges and meters, the variety of 2 Instrument cluster warning lights and indicators, etc. Operation of each 3 Opening and closing the doors and windows, component adjustment before driving, etc. 4 Driving Operations and advice which are necessary for driving Lexus Display 5 Operating the Lexus Display Audio system Audio system 6 Interior features Usage of the interior features, etc. Maintenance 7 Caring for your vehicle and maintenance procedures and care When trouble 8 What to do in case of malfunction or emergency arises Vehicle 9 Vehicle specifications, customizable features, etc. specifications Reporting safety defects for U.S. owners, and seat belt 10 For owners and SRS airbag instructions for Canadian owners Search by symptom Index Search alphabetically IS350 AWD/IS350/IS300 AWD/IS300_U(OM53E34U) 2 TABLE OF CONTENTS For your information...................................8 Operation of each 3 Reading this manual...................................12 component How to search..............................................13 Pictorial index...............................................14 3-1. Key information Keys....................................................110 1 For safety and security 3-2. Opening, closing and locking the doors and trunk 1-1. For safe use Doors.................................................116 Before driving ................................ 26 Trunk.................................................122 For safe driving..............................28 Smart access system with push-button start.......................127 Seat belts..........................................30 SRS airbags..................................... 36 3-3. Adjusting the seats Front passenger occupant Front seats ......................................135 classification system ................. 46 Rear seats .......................................137 Safety information for Driving position memory..........139 children.......................................... 52 Head restraints.............................144 Child restraint systems...............53 3-4. Adjusting the steering Installing child restraints............. 57 wheel and mirrors Exhaust gas precautions.............67 Steering wheel..............................147 1-2. Theft deterrent system Inside rear view mirror..............149 Engine immobilizer system.......68 Outside rear view mirrors ........151 Alarm...................................................71 3-5. Opening, closing the Theft prevention labels windows and moon roof (for U.S.A.).....................................74 Power windows............................154 Moon roof...................................... 158 2 Instrument cluster 2. Instrument cluster Warning lights and indicators........................................76 Gauges and meters.......................81 Multi-information display ..........86 Fuel consumption information ................................. 103 IS350 AWD/IS350/IS300 AWD/IS300_U(OM53E34U) 3 4-5. Using the driving support 4 Driving systems Lexus Safety System+................214 4-1. Before driving PCS Driving the vehicle ......................164 (Pre-Collision System)...........221 1 Cargo and luggage ....................172 LDA (Lane Departure Alert Vehicle load limits .......................175 with steering control)............ 232 Trailer towing ................................176 Dynamic radar cruise 2 control.........................................239 Dinghy towing...............................177 Intuitive parking assist................251 4-2. Driving procedures Lexus parking assist 3 Engine (ignition) switch.............178 monitor........................................260 Automatic transmission ........... 183 BSM (Blind Spot Monitor)......276 4 Turn signal lever.......................... 190 • BSM function.........................280 Parking brake................................192 • RCTA function......................283 ASC Driving mode select 5 (Active Sound Control).........193 switch...........................................288 4-3. Operating the lights and Driving assist systems .............. 292 wipers 4-6. Driving tips 6 Headlight switch ..........................194 Winter driving tips..................... 297 Automatic High Beam.............. 198 Windshield wipers and 7 washer.........................................202 4-4. Refueling 8 Opening the fuel tank cap ...... 210 9 10 IS350 AWD/IS350/IS300 AWD/IS300_U(OM53E34U) 4 TABLE OF CONTENTS 5-7. Connecting Bluetooth® 5 Lexus Display Audio system Steps for using Bluetooth® devices ........................................352 5-1. Basic Operations Registering a Bluetooth® Lexus Display Audio device ..........................................354 system..........................................304 Selecting a Bluetooth® Steering wheel audio device ..........................................355 switches ....................................... 310 Connecting a Bluetooth® Mobile Assistant ...........................311 audio player ..............................356 USB/AUX ports..........................313 Connecting a Bluetooth® 5-2. Setup phone........................................... 357 ® Setup menu....................................316 Displaying a Bluetooth device details............................358 General settings...........................317 Detailed Bluetooth® Voice settings..............................320 settings........................................359 Display settings.............................321 5-8. Bluetooth® Audio 5-3. Using the audio system Listening to Bluetooth® Selecting the audio source.... 322 Audio........................................... 362 Optimal use of the audio 5-9. Bluetooth® Phone system..........................................323 Using a Bluetooth® Phone ...363 Audio settings .............................324 Making a call................................365 Audio menu screen Receiving a call...........................368 operation.................................... 327 Speaking on the phone ...........369 5-4. Using the radio Using a Bluetooth® phone Radio operation..........................330 message........................................371 5-5. Playing an audio CD and Using the steering wheel MP3/WMA/AAC discs switches ...................................... 373 CD player operation................336 Bluetooth® phone settings.... 374 5-6. Using an external device 5-10. Phonebook Listening to an iPod ..................343 Contact settings......................... 376 Using USB memory device... 347 Messaging setting ..................... 379 Using the AUX port.................. 351 IS350 AWD/IS350/IS300 AWD/IS300_U(OM53E34U) 5 5-11. Bluetooth® 6 Interior features What to do if... (Troubleshooting)...................380 Bluetooth® ..................................384 6-1. Basic operation of the Remote Touch screen 5-12. Other function 1 Remote Touch ............................402 “Information” screen ..................391 10.3-inch display........................405 USB photo....................................393 Weather information................395 6-2. Using the air conditioning 2 system Voice command system.........396 Automatic air conditioning system.......................................... 407 3 Heated steering wheel/ seat heaters/ seat ventilators...........................416 4 6-3. Using the interior lights Interior lights list.......................... 418 5 • Interior lights............................419 • Personal lights.........................419 6-4. Using the storage features 6 List of storage features..............421 • Glove box............................... 422 7 • Console box .......................... 422 •Cup holders/ bottle holders ........................ 423 8 Trunk features.............................425 9 10 IS350 AWD/IS350/IS300 AWD/IS300_U(OM53E34U) 6 TABLE OF CONTENTS 6-5. Using the other interior 7-3. Do-it-yourself maintenance features Do-it-yourself service Other interior features.............427 precautions ............................... 466 • Sun visors.................................427 Hood...............................................468 • Vanity mirrors ........................427 Positioning a floor jack............469 • Clock .........................................427 Engine compartment.................471 • Power outlet ..........................428 Tires.................................................483 • Armrest....................................429 Tire inflation pressure ..............493 • Rear sunshade ......................429 Wheels...........................................496 • Assist grips ...............................431 Air conditioning filter...............498 • Coat hooks...............................431 Electronic key battery..............500 Garage door opener ...............432 Checking and replacing Compass.......................................439 fuses..............................................502 LEXUS Enform Safety Light bulbs ....................................505 Connect......................................443 8 LEXUS Enform Remote.........448 When trouble arises LEXUS Enform Service Connect......................................449 8-1. Essential information Emergency flashers....................512 7 Maintenance and care If your vehicle has to be stopped in an emergency .....513 7-1. Maintenance and care 8-2. Steps to take in an Cleaning and protecting
Load more

Recommended publications
  • R53 BOOST GAUGE INSTALL 052009 Thank You for Purchasing the ALTA Performance Gauge Pod
    R53 BOOST GAUGE INSTALL 052009 Thank you for purchasing the ALTA Performance gauge pod. Installation should only be performed by persons experienced in the proper operation of Mini electrical and body systems. Please read through all the instructions before performing the installation. SPECIAL NOTES: • Use of the factory service manual, can be very helpful during the installation. These can be purchased as the dealership, or online. http://www.realoem.com has diagrams for the entire car, which can also be helpful. • These instructions are for installing a Prosport Boost Gauge in conjunction with the ALTA gauge pod. There are included instructions with Prosport Gauges, but we recommend using ours as they are tailored to your Mini. • Included with your Prosport Gauges is extra hardware that will not be used. We recommend using the hardware included with your ALTA gauge pod, as these are tailored specifically to your Mini. • Gauge fits into gauge pod by using the included foam tape. Use roughly 2” of foam tape (or go about half way around gauge) and install behind bezel of gauge. When pushing in gauge slightly twist gauge into place. If gauge is not tight enough pull out gauge and install slightly more foam tape. • It is possible that wires can change colors or function over time. It is very important to use a volt meter to probe for proper voltages when. A volt meter is something that can be found at a Radioshack or any electronics store. • There is a buzzer that is built into Prosport gauges which is part of the warning system.
    [Show full text]
  • G-Force2 Instuctions
    GFB Electronic boost controller instruction manual MENU SCRAMBLE BOOST Go Fast Bits P/L Ph: +61 (0)2 9534 0099 P.O. Box 1017 Fax: +61 (0)2 9534 3999 Riverwood NSW 2210 Email: [email protected] Australia Web: www.gfb.com.au contents Intro About the G-Force II 2 Installation Wiring Diagram 3 Solenoid Valve Installation Diagram 4 Menu Navigation Menu Structure 5 Boost Presets 6 Setting the Boost Pressure Duty Cycle 7 Gain 8 Sensitivity 9 Controller Functions Scramble Boost 10 Overboost 11 Peak Hold 11 Display Setting - Units of Pressure 12 Input Setup 12 Colour Settings 13 Additional Info Tips 14 Troubleshooting 15 Tech 16 Warranty 16 about the g force ii The GFB G-Force II boost controller is designed to bring on boost as fast and accurately as possible on a turbocharged vehicle. It incorporates an advanced and unique boost control strategy that allows the user fine control over the peak boost, rise rate, and closed-loop correction. The G-Force II also features a new user interface, making menu navigation and setup as fast and simple as possible. Features at a glance: ?6 individually programmable boost preset memories, selectable on-the-fly ?Closed-loop correction - helps prevent boost variations ?New scramble boost strategy - increase or decrease boost for a certain amount of time at the push of a button ?Overboost protection - shuts down the solenoid and flashes a warning if boost goes too high ?Peak hold display ?Real-time boost/vacuum gauge display - in BAR, kPa, or PSI ?External input - can be used to activate scramble or select boost memories remotely ?Adjustable button colours - tie in with the car’s existing lighting 91.5mm Installing the Head Unit The G-Force II casing is a ½ DIN size, allowing to be MENU mounted into one half of a standard stereo slot.
    [Show full text]
  • R56 MINI COOPER BOOST GAUGE SET 052009 Thank You for Purchasing the ALTA Performance Gauge Pod
    R56 MINI COOPER BOOST GAUGE SET 052009 Thank you for purchasing the ALTA Performance gauge pod. Installation should only be performed by persons experienced in the proper operation of Mini electrical and body systems. Please read through all the instructions before performing the installation. SPECIAL NOTES: • Use of the factory service manual, can be very helpful during the installation. These can be purchased as the dealership, or online. http://www.realoem.com has diagrams for the entire car, which can also be helpful. • These instructions are for installing a Prosport Boost Gauge in conjunction with the ALTA gauge pod. There are included instructions with Prosport Gauges, but we recommend using ours as they are tailored to your Mini. • Included with your Prosport Gauges is extra hardware that will not be used. We recommend using the hardware included with your ALTA gauge pod, as these are tailored specifically to your Mini. • Gauge fits into gauge pod by using the included foam tape. Use roughly 2” of foam tape (or go about half way around gauge) and install behind bezel of gauge. When pushing in gauge slightly twist gauge into place. If gauge is not tight enough pull out gauge and install slightly more foam tape. • It is possible that wires can change colors or function over time. It is very important to use a volt meter to probe for proper voltages when. A volt meter is something that can be found at a Radioshack or any electronics store. • There is a buzzer that is built into Prosport gauges which is part of the warning system.
    [Show full text]
  • 99-07 Superduty Pillar Gauge Pod Installation
    99-07 Superduty Pillar Gauge Pod Installation Page 1 of 10 IMPORTANT: Before starting installation, please be sure that all items which were supplied with the kit are accounted for. Note: These instructions are to be used in conjunction with the instructions supplied with your gauges. This instruction sheet will guide you through the process of installing a pillar mounted gauge pod. For a simple splice connection look at figure 21. This basic type of splice can be used almost exclusively when hooking up your wiring. Warning: Before doing any electrical work the batteries should be disconnected. Recommended Items: QTY Nomenclature (5’) 18 ga Automotive wire (White for lighting)* (5’) 18 ga Automotive wire (Black for ground)* (6’) 18 ga Automotive wire (Red for power)* (12’) 18 ga Automotive wire (**Blue for Trans/Water Temp)* (1)ATM Mini Fuse Tap (Bussman P/N BP-HHH-RP or equivalent) Corrugated wire loom (to protect wires) Misc. crimp terminals for 18 gauge wire (Female Spade, Ring Post, Butt, and Instant Tap) Misc. heat shrink tubing Electrical Tape Zip Ties Riffraff Diesel AIH Tapped Fitting 1/8”-27 NPT to ¼” barbed adapter or compression fitting (used with the AIH Tapped Fitting) ¼” vacuum Tee fitting (if not using Riffraff Diesel AIH Fitting) High Temp Copper Anti-Seize compound *Varies depending on gauges and installation method. **Any color can be used. Recommended Tools: Assorted sockets and wrenches (metric and sae) Assorted screwdrivers (common and Phillips head) Trim removal tool Drill Drill Bits: 3/16” 11/32” Wire crimper, Wire strippers, Wire cutters. 1/8”-27 NPT tap and handle Solder Iron and Solder (Optional) Toll Free Sales & Customer Service: (866) 446-3360 99-07 Superduty Pillar Gauge Pod Installation Page 2 of 10 1) First thing to do when starting the install is to organize your components and determine what order you are going to install your gauges in your pod.
    [Show full text]
  • 2005-08 Mustang Gauge Pod Installation Instructions Page 1 of 10
    2005-08 Mustang Gauge Pod installation instructions Page 1 of 10 Thanks for purchasing the Center Gauge Cluster with Shelby Gauges, from Shelby Performance Parts. Start by opening your kit and checking the contents to make sure everything is complete before getting started. TOOLS YOU’LL NEED FOR INSTALLATION GT500 KIT (Figure A) • Wire harness and terminal kit • Tefl on tape or liquid Tefl on • Billet fuel block w/ brass plug and two 5/32” Allen head bolts and washers • Two dozen zip ties • Vacuum “T” Fitting • Electrical tape • Oil block w/ three installed plugs, one installed adapter and • Four 1” x 1” squares of Velcro one loose adapter • Heat shrink wrap (optional) • Stainless braided line • Soldering gun and • Two Adel clamps solder (optional) • Rigid 10gauge wire or SHELBY / GT NON-SUPERCHARGED (Figure B) welding wire Figure A • Wire harness and terminal kit • Wire cutters, crimpers and • Billet fuel block w/ brass plug and two 5/32” Allen head bolts and washers strippers • Oil block and mounting bracket w/ three installed plugs and • 3/8” and 1/4” ratchet three installed adapters • 8mm socket 1/4” drive • Stainless braided line • 13mm and 17mm • Two 17mm bolts and lock washers for mounting bracket deep sockets 3/8” drive • 3/8”,9/16”,7/8”,13/16” and 12mm wrench SHELBY / GT SUPERCHARGED (Figure C) • 5/32” Allen key • Wire harness and terminal kit • Four jack stands • Billet fuel block w/ brass plug and two 5/32” Allen head bolts and washers • Floor jack • Vacuum “T” Fitting • Safety glasses and gloves • Oil block and mounting bracket w/ four installed plugs and three installed adapters • Stainless braided line • Two 17mm bolts and lock washers for mounting bracket Figure B A few notes about installation - Although we’ve made every effort to make these instructions as complete as pos- sible for the average do-it-yourself enthusiast, we highly recommend having this installation performed by a certifi ed mechanic at a professional automotive facility.
    [Show full text]
  • Accelerate Your Business More Than 500 Racing & Performance Products from the 2012 SEMA Show
    SEMA RACING & PERFORMANCE PRODUCTS Accelerate Your Business More than 500 Racing & Performance Products from the 2012 SEMA Show he Racing & Performance section of the SEMA Show is the largest on the floorplan, completely taking over the Central Hall of the Las Vegas Convention Center each year. In 2012, a total of 507 exhibitors set up booths, entering a vast array of their latest offerings into the Ideas Alive, featuring the TNew Products Showcase. The following pages represent more than 500 of the new and featured products that exhibitors registered in the Show- case. Along with the products, journalist Steve Campbell interviewed industry executives to get their thoughts about the trends they perceive V-Maxx USA Big Brake Kit and some words of advice about what might lie ahead. 813-655-7766 www.v-maxxusa.com Big brake kit. Ready to fit. Hi-Lustre Car Care Products Nano Carnauba Spray Wax 323-269-3858 www.hilustre.com PN: 1111 Nano Carnauba Spray Wax uses the finest, top-grade Carnauba wax blended with nano technology and high-tech hydrophobic poly- mers to create an exceptional, high-gloss pro- K&P Engineering tective coating. Nano wax particles are said to Remote Filter Mount—Oil or Fuel have phenomenal surface coverage and pene- 720-238-1181 trate deeply and evenly. Nano Carnauba Spray www.kandpengineering.com Wax contains no solvents and is dust free. PN: RM1 K&P Engineering’s new lightweight remote filter mount allows flexible filter placement for oil, fuel or other applications. Made in the U.S.A. Burns Stainless LLC G-Force Racing Gear Burns Stainless LLC Merge Collector CFG Carbon Fiber SA2010 Helmet #3028 Reverse Cone Megaphone Muffler 949-631-5120 770-998-8855 949-631-5120 www.burnsstainless.com www.gforce.com www.burnsstainless.com PN: MC4-250-375-304 with megaphone PN: 3028 PN: SMRC-250-400-L to 4¾ in.
    [Show full text]
  • BOOST TEE Product Description: Manual Boost Controller Product Number: TS-0101-1001
    Product Name: BOOST TEE Product Description: Manual Boost Controller Product Number: TS-0101-1001 ------------------------------------------------------------------------------------------------------------------------ ABOUT THIS PRODUCT Thank you for purchasing your new Turbosmart Boost Tee. This new model now has some great new features. These include: • 2 ramp rates of boost to give you the option of a fast rise in boost or a slightly tame rise for more sensitive setups. • A wider boost adjustment range for wastegates with low spring base pressures. • A new mounting bracket to make it easier to mount. IMPORTANT NOTES ON YOUR BOOST CONTROLLER • Use only silicone hose that is the correct size and pressure rating for your application when fitting your boost controller – other hoses will be effected by heat and will eventually crack or split which could cause excessive boost pressure and engine damage • Ensure that all plumbing is secured with clamps • Your boost controller should be mounted at least 100mm from any heat source • A Turbosmart Fuel Cut Defender may need to be used in conjunction with your boost controller – refer to www.turbosmart.com.au • The boost dial has a left handed thread, be sure not to over tighten as this will damage the boost controller RECOMMENDATIONS • Turbosmart recommends that the Air Fuel ratio is checked once boost pressure is set • Turbosmart recommends that boost pressure is set using a Dynamometer and not on the street • Turbosmart recommends that a accurate boost gauge be permanently fitted to the vehicle
    [Show full text]
  • Vacuum / Econometer / Boost Gauge Instructions
    VACUUM / ECONOMETER / BOOST GAUGE INSTRUCTIONS INDICADOR DE VACIO / DE ECONOMIA/DE REFUERZO INSTRUCCIONES TENSIÓN 12 V VACUOMÈTRE / ÉCONOMÈTRE / MANOMÈTRE DE PRESSION DE TURBO These types of gauges measure the vacuum and/or you can screw in the engine fitting directly or pressure existing within the intake manifold of the using the adapter included with the gauge. vehicle. Different ranges or markings cover different Manifolds often have removable plugs. needs and applications. A vacuum or econometer 2. Screw in the adapter (if needed) and engine gauge measures the vacuum created as the engine fitting into the manifold at the location you se- draws air into its cylinders. A boost gauge measures lected. the same vacuum as well as the pressure when an 3. Uncoil a few feet of tubing and slide a external turbocharger or supercharger pushes air into the engine. An engine that is not supercharged Diagram 1 FERRULE TUBING or turbocharged will generally have a vacuum read- ing between 12” and 18” Hg (inches of mercury) at idle. Check the manufacturer’s specifications for more exact readings for your engine at idle speed HEX NUT ADAPT- ENGINE and other RPM. All of these gauges can aid you FITTING in monitoring engine efficiency, achieving the best hex nut and ferrule over the end of the tubing fuel economy and noticing engine malfunctions as show in Diagram 1. immediately. 4. Insert the tubing into the engine fitting and then PRECAUTIONS tighten the hex nut into the engine fitting. 1. Be sure the source of vacuum you pick is a direct 5.
    [Show full text]
  • AWE B8 S4 S5 Ventboostgauge 1
    INSTALLATION GUIDE Congratulations on your purchase of the AWE Tuning Vent Boost Gauge Kit for the 2010+ Audi S4 and S5 3.0T and S5 Cab- rio. 2010+ Audi S4, S5, S5 Cabrio Exquisite build quality with industry leading performance Vent Boost Gauge Kit distinguishes this gauge kit from all others. and Boost Tap Contact us with any installation questions. 215-658-1670 AWE-Tuning.com [email protected] Copyright 2012, AWE Tuning. No part of this document may be reused or duplicated without the express permission of AWE Tuning/Secor Ltd. All rights reserved. Rev1.3 PARTS AND TOOL LIST 1 preassembled AWE Tuning vent and gauge pod Required tools and materials: 1 boost hose Flathead screwdriver 1 sender unit with wiring harness T-30 torx bit 1 gauge wiring harness Ratchet 1 fume 8lter Extension 1 6mm T-8tting 13mm socket 1 machined boost tap plate 10mm socket 1 3/16” vacuum cap 8mm socket 1 22” length of additional boost hose Razor blade 2 red wiring loop terminal Wire strippers/cutters 2 red posi-tap connector Electrical tape 4 red butt connectors Drill 1 8” long black wire 7/16” drill bit 1 8” long white wire 2 8” long red wire 6 medium zip tie 9 small zip tie Step 1 Open the trunk and remove the spare tire to access the battery. Disconnect the negative battery terminal. AAA Open the hood. Please note that a boost tap is required to hook up any type of boost gauge to this engine. The following steps outline in- stallation of the AWE Tuning Boost Tap.
    [Show full text]
  • Defi Catalog 2019
    Dimension / Optional Parts Defi-Link Meter ADVANCE A1 / RS / CR / BF Racer Gauge N2 Racer Gauge ADVANCE ZD Sequential Indicator (8 LEDs) Gauge size Gauge size Peak LED Peak LED(blue) OLED Display Warning LED Warning LED(red) SET button H (ZD movable range☆） DIM sensor SELECT button ☆Movable range The ZD can be moved up and down. It also can be tilted front/back and right /left. The movable range depends upon (Movable range) how it has been installed. (Movable range) Gauge size φ52 Only for φ80 Tachometer φ60 φ60(w/o RPB) □unit 【mm】 (1mm=0.039in.) A1 φ60 54.6 17.9 68.3 φ80(w/o RPB) Defi-Link ADVANCE Control Unit DIN-Gauge ●Control Unit ●Switch unit Left button Right button Differential Slide switch pressure LED Middle button Temperature gauge1 Temperature gauge2 Pressure gauge □unit 【mm】 (1mm=0.039in.) □unit 【mm】 (1mm=0.039in.) Regular Position Bezel ■ADVANCE CR/BF/RS ■Racer Gauge ■φ80 Tachometer ■ Racer Gauge N2 For φ52 ●DF06201 For φ80 ●DF07105G For φ52 ●PDF07812G For φ60 ●PDF11516G For φ60 ●PDF08607G 【Applicable products】 【Applicable products】 ADVANCE Series φ52,φ60 Racer Gauge φ52,φ60 RPB and a Single Visor cannot be mounted together. Racer Gauge N2 φ52,φ60 ■Defi-Link ADVANCE φ80 Tachometer Indicator ■Defi Single Meter Visor ●PDF07108 For φ52 ●DF11101 For φ60 ● DF11201 【Applicable products】 【Applicable products】 ADVANCE φ80 Tachometer ADVANCE Series φ52,φ60 Large-sized indicator enhanced by green and red lights Racer Gauge φ52,φ60 improves visibility of warnings in addition to the warning LED. Defi-Link Meter Series φ52,φ60 Specifications: The power supply and signals are supplied Single Meter Visor reduces sun glare TABLE OF CONTENTS from the gauge on the gauge and prevents the Dimensions: 32.2(W)X78.0(D)X41.6(H)mm reflection of the gauge onto the Wire length: 20cm windshield at night.
    [Show full text]
  • Turbo Boost Gauge Removal Procedure
    ATTENTION: IMPORTANT - All GENERAL MANAGER q Service Personnel PARTS MANAGER q Should Read and Initial in the boxes CLAIMS PERSONNEL q provided, right. SERVICE MANAGER q © 2016 Subaru of America, Inc. All rights reserved. SERVICE BULLETIN APPLICABILITY: 2009-13MY Forester Turbo Models NUMBER: 15-202-16 2008-14MY WRX and STI Models DATE: 06/24/16 SUBJECT: Turbo Boost Gauge Removal Procedure INTRODUCTION: This bulletin provides a procedure for removal of the accessory Turbo Boost Gauge and restoration of the vehicle to pre-installation (OEM) condition. Due to circumstances beyond the control of Subaru of America, Inc. (SOA), the accessory Turbo Boost Gauge, p.n. H501SFG500 is no longer available. In the interest of customer satisfaction, SOA will address customer concerns involving a failure of the gauge by returning the vehicle to it’s OEM configuration. It is important to read through this procedure in its entirety and understand it before starting repairs. PART INFORMATION: DESCRIPTION PART NUMBER APPLICABILITY Bulkhead Plug 690302520 All 99071AC580 WRX and Forester Vacuum Hose 99071AB140 STI Recirculation Valve Gasket 21896AA072 STI Only Combination Meter Hood Order applicable part number by VIN TOOLS REQUIRED: • Wire Cutters • #2 Phillips Screw Driver • Flat Head Screw Driver • 10, 12 and 14mm Sockets, Ratchet and 6” Extension • Torque Wrench • Pliers • Plastic Trim Removal Tool • Tweezers (optional) Continued... CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD SUBARU OF AMERICA, INC. IS RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. ISO 14001 COMPLIANT Subaru Service Bulletins are intended for use by professional technicians ONLY. They ISO 14001 is the international standard for are written to inform those technicians of conditions that may occur in some vehicles, excellence in Environmental Management or to provide information that could assist in the proper servicing of the vehicle.
    [Show full text]
  • Signature Series Manual
    SIGNATURE GAUGE FEATURES ALL BLACK WHEN POWERED OFF FLASHING CIRCLE GENERAL ALARM PROGRAMMABLE TEXT FLASHES WITH ALARMS SELECTABLE MULTICOLOUR BACKLIGHT, BRIGHTNESS & CONTRAST HIGH RESOLUTION MODE, 0.1 PSI, 0.1 DEGREE ETC. PROGRAMMABLE BUTTON OPTION, RECALL+MENU ETC MAXIMUM VALUES STORED AND RECALLED FROM MEMORY. HIGH, LOW, EXTERNAL & INTERNAL WARNING ALARMS HIGH AND LOW BACKLIGHT ALARMS WITH SELECTABLE COLOUR EXTERNAL WARNINGS FOR LARGE LED’S OR CONTROL RELAYS PROGRAMMABLE LOW BATTERY WARNING SELECTABLE AVERAGING FOR PRESSURE. SELECTABLE UNITS FOR PRESSURE AND TEMPERATURE SOLID STAINLESS PRESSURE SENSORS MEASURE PRESSURE AND VACUUM. SPLASH PROOF SENSOR CONNECTORS EXTENDED TEMPERATURE RANGE FOR HOT AND COLD CONDITIONS THERMOCOUPLE OPTIONS AVAILABLE INSTALLATION NOTES Please follow the installation and fitting instructions carefully, and refer to the diagrams on the following pages. Please ensure that the gauge mounted is at least slightly below the driver’s eye level to ensure a clear LCD display. The pressure sensor must be screwed in to a suitable flat surface so that the dowty sealing washer can seal down on to it (see turbo boost pressure installation notes). Please do not over tighten the sensor, the dowty seal does not need to be tight to seal properly. The temperature sensor has a tapered thread and must be sealed with PTFE tape. When fitting the pressure sensor plugs, be careful to align the painted marks as shown in the diagram to get correct orientation. The temperature sensor plug has alignment lines moulded into the plug and socket bodies. If you are fitting the pressure sensor to the output of a pump, and the pressure is pulsing, you may need to increase the ‘average time’ for the sensor (see menu system).
    [Show full text]