Rolling Stock 2005 CAT 966GII SERIES RUBBER TIRE LOG LOADER W/MEDFORD FORKS, CAT 6-CYL DIESEL ENGINE, 26.5-25 TIRES & CHAINS, HOUR METER READS: 12,532, S/N: CAT0966GCANZ01267 1999 CAT 924F SERIES RUBBER TIRE LOG LOADER INTEGRATED TOOL CARRIER W/FORKS, CAT 4-CYL DIESEL ENGINE, 17.5-25 TIRES & CHAINS, HOUR METER READS: 34,811, S/N: 5NN01544 2000 HYSTER H250XL FORKLIFT, 19,750 LB CAPACITY, DIESEL ENGINE, MONOTROL, 212.6” 2-STAGE MAST W/FORK POSITIONERS, SIDE SHIFT, LUMBER FORKS, DUAL PNEUMATIC TIRES, HOUR METER READS: 4,512, S/N: E00D04402X 1993 HYSTER H100XL FORKLIFT, 9,800 LB CAPACITY, GAS ENGINE, 159-1/2” 2-STAGE MAST W/SIDE SHIFT, DUAL PNEUMATIC TIRES, HOUR METER READS: 3,303, S/N: G004V06213P 2000 HYSTER H250XL 2001 HYSTER S80XL2 FORKLIFT, 7,450 LB CAPACITY, PROPANE, 124” 2-STAGE MAST W/SIDE SHIFT, SOLID TIRES, HOUR METER READS: 9,535, S/N: D004D11086Y 1994 HYSTER S80XLBCS FORKLIFT, 8,350 LB CAPACITY, PROPANE, MONOTROL, 145” 2-STAGE MAST W/SIDE SHIFT, SOLID TIRES, HOUR METER READS: 3,843, S/N: D004V06411R 2000 HYSTER S60EBCS FORKLIFT, 6,500 LB CAPACITY, GAS ENGINE, MONOTROL, 145-1/2” 2-STAGE MAST W/SIDE SHIFT, SOLID TIRES, HOUR METER READS: 4,026, S/N: C004D0263X SULLAIR 150 SULLICSCREW COMPRESSOR W/4-CYL GAS ENGINE MOUNTED ON S/A TRAILER 1965 MACK B753LS T/A WATER TRUCK, DIESEL ENGINE, MANUAL TRANSMISSION, APPROX 3,000 GALLON TANK W/8 HP GAS PUMP, SPRAY BAR, ODOMETER READS: 238,364, S/N: C70DU-836,390 1966 FORD C700C0E DUAL WHEEL WATER TRUCK, DIESEL ENGINE, MANUAL TRANSMISSION, APPROX 1,000 GALLON TANK, S/N: B753LS2985 1999 CAT 924F SERIES

2001 HYSTER S80XL2 1993 HYSTER H100XL 1994 HYSTER S80XLBCS SAWMILL, VENEER MILL, ROLLING STOCK & BUILDINGS TERMS AND CONDITIONS 13% BUYERS PREMIUM ON ALL PURCHASES PAYMENT: FULL PAYMENT MUST BE MADE BY 5 PM, JUNE 24TH. CASH, CASHIERS CHECK, WIRE TRANSFER, MASTERCARD OR VISA ONLY. CHECKS ARE ACCEPTED ONLY WITH BANK LETTER OF GUARANTEE. REMOVAL: CUSTOMERS ARE RESPONSIBLE FOR REMOVING THEIR ITEMS FROM THE AUCTION SITE. ALL ITEMS MUST BE REMOVED NO LATER THAN 4:00 PM, FRIDAY JULY 24TH. REMOVAL HOURS: 8:00 AM – 4:00 PM, THURSDAY, JUNE 25TH THROUGH FRIDAY JULY 24TH. NO WEEKEND REMOVAL WARRANTY DISCLAIMER: ALL SALES ARE FINAL. ALL ITEMS ARE BEING SOLD “AS IS, WHERE IS,” WITH ALL FAULTS AND WITHOUT ANY WARRANTIES AS TO MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE. THE PRINCIPAL, THE AUCTIONEER, THE ADVERTISING COORDINATOR, AND ANY OF THEIR AGENTS MAKE NO EXPRESS OR IMPLIED WARRANTIES OF ANY TYPE. COMPLETE TERMS AND CONDITIONS OF SALE WILL BE AVAILABLE AT THE TIME OF SALE.

1.800.426.3008 - 425.486.1246 - murphyauction.com START DATE: 11:00 AM | WEDNESDAY - JUNE 17 END DATE: 11:00 AM | WEDNESDAY - JUNE 24

PRESORTED FIRST CLASS MAIL James G. Murphy Co. U.S. POSTAGE Commercial & Industrial Auctioneers PAID SEATTLE, WA P.O. Box 82160, Kenmore, WA 98028 PERMIT NO. 963

SALEM

James G. Murphy Co. Commercial & Industrial Auctioneers PUBLIC ONLINE AUCTION SAWMILL, VENEER MILL, ROLLING STOCK & BUILDINGS Start Date: 11:00 AM | Wednesday - June 17 End Date: 11:00 AM | Wednesday - June 24 704 E 4th Ave, Post Falls, ID 83854 MURPHYAUCTION.COM >>>>>ONLINE ONLY AUCTION<<<<< 1.800.426.3008 - 425.486.1246 - murphyauction.com 425.486.1246 - James G. Murphy Co. - MURPHYAUCTION.COM IDAHO VENEER COMPANY- ONLINE ONLY Start Date: 11:00 AM | Wednesday - June 17 End Date: 11:00 AM | Wednesday - June 24 Preview: 8AM to 4PM | Monday & Tuesday - June 22 & 23 Preview Also By Appointment Location: 704 E 4th Ave, Post Falls, ID 83854

KIMWOOD

2005 CAT 966GII SERIES

SAWMILL, VENEER MILL, ROLLING STOCK & BUILDINGS SIMONDS SM0960 2005 REFORM 61/55-ZS MOCO

1999 KUPER TYPE ACR/3100 1993 ANGELO CREMONA & FIGLIO ALLEN BRADLEY >>>>>ONLINE ONLY AUCTION<<<<< 1.800.426.3008 - 425.486.1246 - murphyauction.com NO MINIMUMS - NO RESERVES WOOD BUILDINGS

WELLONS COE

1971 CLEAVER BROOKS CB200-400 TUBE KILN CARTS

DEBARKERS: PLANER MILL BREAKDOWN HOIST, TRANSFERS, CONVEYORS & ROLLCASES (REMOVED FROM BUILDING) SALEM 27” 5-ARM RING DEBARKER W/75 HP/900 RPM RING DRIVE MOTOR, FRANK 40 HP DC FEED DRIVE MOTOR, LARGE LOG BYPASS, APPROX 25’ DIEHL D68 4”X8” 6-HEAD MOULDER (ONLY 5-HEADS ON MACHINE), INFEED LOG HAUL, (4) HOURGLASS OUTFEED ROLLS TO APPROX 54” OUTFEED (2) BOTTOM & (1) TOP HEAD 20 HP, (2) 10 HP SIDE HEADS, POWERED FEED THRU LOG HAUL W/3 & 4-ARM LOG KICKERS, CONTROLS, ELECTRICS, DRIVES & ROLLS & VERTICAL INFEED ROLLS, SPARE HEADS & PARTS (MOULDER BUILDING), PARTS (SAWMILL), S/N: 154706-83 S/N: 75-2074-2975 SCHURMAN APPROX 18’ ROSSERHEAD DEBARKER W/15” ROSSERHEAD, 125 12’ HYDRAULIC OPERATED DUAL PINEAPPLE MOULDER FEED TABLE W/3-1/2’ HP/1,775 RPM HEAD DRIVE MOTOR, 30 HP/1,800 RPM TRUNION DRIVE MOTOR, 8-STRAND POLY CHAIN & 8’ 7-STRAND 81X INFEED TRANSFER (MOULDER 75 HP GEN SET, CONTROLS, ELECTRICS & PARTS (SAWMILL) BUILDING) MORBARK NW APPROX 40”X12’ ROSSERHEAD DEBARKER APPROX 15-1/2’ DUAL PINEAPPLE PLANER FEED TABLE W/SLOW DOWN ROLL, (7) 28” CANTED ROLLS, (2) CHROMED, LEESON 15 HP/1,170 RPM MOTOR DECK SAW-LOG SPLITTER: (REMOVED FROM BUILDING) L&M 100-HC 6’ DECK SAW W/30 HP MOTOR, CLAMP, APPROX 25’ IN & STACKER & BANDER: OUTFEED LOG HAULS W/LOG STOPS, ALL DRIVES, SPARE BARS & CHAINS (SAWMILL) MOCO 16’ HYDRAULIC OPERATED STACKER W/LUNDEN AUTO STICK PLACER, SECONDARY STACKING FORKS, (9) STICK PLACING FORKS, (5) 66” LUMBER CUSTOM BUILT 10’ HORIZONTAL LOG SPLITTER W/25 HP/1,800 RPM MOTOR, LOWERING FORKS, APPROX 28’ 3-SECTION INFEED W/EVEN END ROLLS & CHAIN, APPROX 24’ TRAVEL W/MOTOR TO REDUCER DRIVE, LOG CRADLE, MOUNTED APPROX 54’ 5-STRAND 81X OUTFEED TRANSFER (RESAW) ON T/A TRAILER W/ELECTRICS (CHIP BIN AREA) SIGNODE STYLE BANDING STATION W/HAND POLY STRAPPING, TOP & BOTTOM HEADRIG & RESAW: SQUEEZE, LUMBER BUMP GATE, 51” POWERED IN & OUT ROLLCASES, APPROX MCDONOUGH 6’ RH VERTICAL BAND SLANTED HEADRIG BANDMILL 25’ & 22’ 4-STRAND 81X INFEED & OUTFEED TRANSFERS (BANDER) W/125 HP/1,770 RPM MOTOR, DOUBLE COLUMN, AIR STRAIN, MOTORIZED TOP HOGS & CHIPPERS: WHEEL & GUIDE, SLAB TABLE, CONTROLS, ELECTRICS, SPARE PARTS & SAWS (SAWMILL), S/N: 72M214 KIMWOOD 36”X36” HAMMER HOG W/SIEMENS 200 HP/885 RPM MOTOR, HYDRAULIC HOOD, 30 TPH RATED, 3” MINUS, CCW, SPARE GRATES, 18,700 LBS SALEM 6’ VERTICAL BAND RESAW W/150 HP/1,190 RPM MOTOR, (SAWMILL), S/N: 60552 MECHANICAL STRAIN, SPLIT SECTION 10’ & 8’ MECHANICAL LINE BAR INFEED ROLLS & CROWDER ROLLS, 6’ MECHANICAL LINE BAR OUTFEED ROLLS, JEFFREY 34WB HAMMERMILL W/US 150 HP/1,180 RPM MOTOR (PLANER MILL), CONTROLS & SPARE BANDSAWS (RESAW BUILDING) S/N: 11469 CARRIAGE - CARRIAGE DRIVE & SCANNING: JEFFREY 20X12AB MINI MILL W/50 HP/1,775 RPM MOTOR, 1-1/2” GRATE (SHOP AREA), S/N: 12418 1995 CORLEY APPROX 42”X16’ 3-KNEE SLANT BED TEMPOSONIC POSITIONED LOG CARRIAGE, HOLD DOWNS, CANT FLIPPERS, (3) TRUCKS, BLACK CLAWSON 66-6K CHIPPER W/APPROX 250 HP MOTOR, DROP INFEED, TOP PANTOGRAPH & RAILS, S/N: 30A-L7-154 OUTFEED, SPARE KNIVES (SAWMILL), S/N: 4131 TYRONE BERRY SMA240 100 HP HYDRAULIC CARRIAGE DRIVE SUMNER 78” 6-KNIFE VENEER CHIPPER W/BREAKER ROLLS, 150 HP/1,180 RPM MOTOR, SIDE INFEED, BOTTOM DISCHARGE, SPARE KNIVES (VENEER PLANT), INOVEC YIELDMASTER HEADRIG CARRIAGE OPTIMIZEER S/N: C-22361 AIR OPERATED LOG TURNER, 2-ARM LOG KICKER & 13’ 4-ARM LS&L SCREENS - BLOWERS- FEEDERS: EDGER - TRIMMERS: PERFORMANCE 30-6 WATERFALL SCREEN W/(6) 30” SCREENS (SAWMILL), S/N: 30-6-0-006; SODERHAMN CS26 6’X6’ 2-DECK CHIP SCREEN (SHOP AREA); CROSBY 42”X2” KEYED ARBOR BOARD EDGER W/(1) 20” STATIONARY SAW & 2008 REBUILT WESTERN PNEUMATICS 12”X30” 5111 SERIES ROTARY LOBE (3) 20” MOVABLE SAWS, BALDOR 75 HP/1,470 HP MOTOR, (4) FEED ROLLS, IN & BLOWER; 1999 WESTERN PNEUMATICS 12”X30” 5111 SERIES ROTARY LOBE OUTFEED ROLLCASES, LASERS (SAWMILL) BLOWER W/GE 150 HP/1,775 RPM MOTOR, DONALDSON & UNIVERSAL IRVINGTON MOORE 18’ CUT, APPROX 24’ PASS LINE SHAFT TRIMMER SILENCERS (PLANER MILL), S/N: A25346; WESTERN PNEUMATICS 8”X20” ROTARY W/APPROX 50 HP MOTOR, (9) SAWS, PASS THRU TRANSFER, SPARE PARTS & LOBE BLOWER W/40 HP/1,775 RPM MOTOR & (2) SILENCERS; WESTERN SAWS (SAWMILL) PNEUMATICS 8”X20” ROTARY LOBE BLOWER (NOT INSTALLED); FULLER 8”X18” 721-4500 SERIES ROTARY LOBE BLOWER W40 HP/1,775 RPM MOTOR (SAWMILL); CUSTOM BUILT 3-SAW VALLEY TIMBER TRIMMER W/(2) 36” SAWS SET AT 9’ & PRECISION MACHINE 25”X30”, 24”X30” & (2) 20”X30” CHIP FEEDERS; WESTERN (1) 36” ADJUSTABLE SAW, FEED THRU TRANSFER & ROLLS W/DRIVES, SPARE PNEUMATICS (2) 20”X25” & 20”X20” CHIP FEEDERS; RADER (2) 25”X30”, SAWS (SAWMILL) 20”X20” & (2) APPROX 16”X16” CHIP FEEDERS, S/N: 30-6-0-006 IRVINGTON MOORE 16’ CUT, APPROX 20’ PASS LINE SHAFT TRIMMER W/ CHIP BINS - SURGE BINS - CYCLONES: ZERO+SPLIT SAWS, PASS THRU TRANSFER, LUCIDYNE COLOR SCAN GRADE READER (PLANER) WEST COAST SHEET METAL APPROX 24-UNIT HYDRAULIC OPERATED BINS W/20’ SOLID GATE DOORS, 15 HP HYDRAULIC UNIT (PLANER MILL) PLANER & MOULDER FEED TABLE - PLANER MILL EQUIPMENT: APPROX 9’W X 14’L X 16’H TWIN SCREW LIVE BOTTOM SURGE BIN W/APPROX YATES A20 6”X20” 4-HEAD BELT DRIVEN PLANER (NO HEAD DRIVE MOTORS), 6’ & 5’ DIA CYCLONES (SHOP AREA) S/N: B-24648

1.800.426.3008 - 425.486.1246 - murphyauction.com PUBLIC ONLINE AUCTION - POST FALLS, ID

YATES A20 1995 FISHER & RUCKLE MONGUZZI AFMRI-52 SIMONDS SM0930

VIBRA PRO IRVINGTON MOORE HANCHETT DN40

APPROX 12’W X 16’L X 12’H 3-STRAND BOX CHAIN LIVE BOTTOM SURGE BIN AIR TEK TWB1000 TWIN TOWER BLOWER PURGE DRYER, 1,000 SCFM, 150 PSIG, W/APPROX 4’ DIA CYCLONE (SILO AREA) STARWATCH REMOTE SYSTEM ANALYZER (VENEER MILL), S/N: T024600J APPROX 10’ & 6’ DIA CYCLONES (PLANER MILL) (2) SULLAIR 25-100L ROTARY SCREW COMPRESSORS, 100 HP, AIR COOLED (SAWMILL BASEMENT & MOULDER BUILDING) (2) APPROX 8’ DIA & (1) APPROX 4’ DIA CYCLONES (VENEER MILL) WELK BROS APPROX 40”X10’ AIR RECEIVER, MCULLOCH APPROX 36”X10’ AIR VIBRATORY CONVEYORS - METAL DETECTORS: RECEIVER TANK & NUMEROUS SMALL AIR RECEIVER & CONDENSATE TANKS VIBRA PRO BHSR-181200FS-1/4(MS)29.5 APPROX 18”X22” 10 HP BALANCED VENEER DRYER: VIBRATORY CONVEYOR W/5’ FINES DROP OUT SECTION, 475 HP, 1” STROKE (SAWMILL HOG), S/N: 1500 1993 ANGELO CREMONA & FIGLIO 212” 3-ZONE STEAM HEATED PRESS VENEER DRYER W/JET VENTILATION, (2) 5,400MM-304 STAINLESS STEEL VIBRA PRO HSR181000F/S-1/4(MS)69’F APPROX 18”X80’ 5 HP VIBRATORY SCREENS, MOD# CDT/# VACUUM FEEDER W/INFEED ROLLCASE, (8) 20 HP FANS, CONVEYOR, 380 RPM (SAWMILL BASEMENT), S/N: 1118 OUTFEED COOLING SECTION, 21’ POWERED INFEED ROLLCASE TO FEEDER VIBRA PRO APPROX 18”X69’ VIBRATORY CONVEYOR (SAWMILL BASEMENT) ROLLCASE, 6’ STRIP BELT OUTFEED, ALLEN BRADLEY 4-SECTION MCC W/(20) SWITCHES & VS DRIVES, ALLEN BRADLEY LOGIX 5561 PLC VIBRA PRO HSR181000F/S-1/4(MS)30’F APPROX 30”X42’ 5 HP VIBRATORY CONVEYOR, 425 RPM, 1” STROKE (PLANER MILL), S/N: 1500 VENEER SPLICERS - JOINTER: APPROX 30”X80’ CHEVRON BELT CONVEYOR W/5’ FIBERGLASS TUB, MDI CR85 1999 KUPER TYPE ACR/3100 STOP & GO VENEER SPLICER, HEATING RAIL, DIGITAL CONTROL CHASSIS, S/N:EV10005, XR7F CONTROLLER (TO KIMWOOD JOINTAGE PRESSURE BEAM, CLIPPER STATION W/HOLD DOWNS, END CUT & HOG), S/N: E0423; APPROX 14”X40’ BELT CONVEYOR W/5’ FIBERGLASS TUB, TAPING STATIONS, BELT TABLE, DRIVE STACKER, HOISTING DRUM, CONTROLS, MDI CCW65A METAL DETECTOR (TO BLACK CLAWSON CHIPPER), S/N: 11273; ELECTRICS, SPARE KNIVES & PARTS, S/N: 3901-094 APPROX 24”X50’ BELT CONVEYOR W/8’ FIBERGLASS TUB, MDI CCW65A METAL VENEER GUILLOTINES - CLIPPERS - SLICERS: DETECTOR (TO VENEER CHIPPER), S/N: 3578 1995 FISHER & RUCKLE MONGUZZI AFMRI-52 VENEER GUILLOTINE, 206” GRINDING & FILING ROOM EQUIPMENT: SINGLE KNIFE, FENCE, PRESSURE BAR, BANNER MICRO SCREEN, SPARE KNIVES, 2005 REFORM 61/55-ZS TRAVELING DUAL HEAD KNIFE GRINDER W/MAGNETIC S/N: 7470061 BED, 240” BED, CANTER COOLANT PUMP (RESAW AREA), S/N: 7453 1979 RUCKLE AFMRI 128” VENEER GUILLOTINE, SPARE KNIVES, S/N: M32079 SIMONDS SM0960 BANDSAW LEVELLER (RESAW AREA), S/N: 96960286 SAABE 32” END CLIPPER SIMONDS SM0930 BANDSAW TENSIONER (RESAW AREA), S/N: 97930132 CAPITAL MACHINE APPROX 192” MECHANICAL VENEER CLIPPER; CAPITAL (2) ARMSTRONG #4 BANDSAW SHARPENERS W/CLAMPS & STANDS (RESAW MACHINE APPROX 185” MECHANICAL VENEER CLIPPER; (2) CAPITAL MACHINE AREA), S/N: LH13073 & RH10449 APPROX 108” MECHANICAL VENEER CLIPPERS, (1) W/ALUMINUM HEAD ARMSTRONG #17-72 CIRCLE SAW SHARPENER (RESAW AREA), S/N: 13682 MERRITT MECHANICALLY OPERATED 9’ VENEER CLIPPER (LOCATED IN JASPER, OR) ARMSTRONG #16 CIRCLE SAW SHARPENER (MOULDER AREA), S/N: 13996 CAPITOL MECHANICALLY OPERATED 8’ VENEER CLIPPER (LOCATED IN JASPER, HANCHETT DN40 TRAVEL BED KNIFE GRINDER (MOULDER AREA) OR) MICHIGAN MKCG TRAVEL BED KNIFE GRINDER (MOULDER AREA), S/N: 441 MISC. VENEER EQUIPMENT: ACME 12” SPECIAL & STANDARD MODEL CIRCLE SAW SHARPENERS, SWEED HYDRAULIC OPERATED STACK TURNER; SALEM 66” VENEER CORE SAW; ARMSTRONG #14 BANDSAW SHEAR, SPARE ROUND & BANDSAWS, QUANTITY MATTISON 404 STRAIGHT LINE RIP SAW; NUMEROUS SCISSOR LIFTS TO 15’; OF SLICERS, GUILLOTINE, CHIPPER KNIVES, NIELSEN & BELL CHAIN SHARPENERS LARGE QUANTITY OF VENEER CARTS; 28’ & 34’ 7-STRAND 2060H S/S TANK COMPRESSORS - DRYER - AIR RECEIVERS: TRANSFERS; LOG CENTERING ROLLS; SPARE DRYER ROLLS; GLOBE STICKER SAW; (2) PORTABLE STEAM HEATERS; ORIGINAL SAW CO, CRAFTSMAN, DELTA, TOPS & 2001 ATLAS COPCO GA160 OIL INJECTED ROTARY SCREW COMPRESSOR, CUSTOM BUILT RADIAL ARM SAWS 200 HP, 132 PSIG (VENEER MILL), S/N: ATF071628 1996 ATLAS COPCO GA160 OIL INJECTED ROTARY SCREW COMPRESSOR, 200 HP, 107 PSIG (VENEER MILL), S/N: ATF035721 1.800.426.3008 - 425.486.1246 - murphyauction.com NO MINIMUMS - NO RESERVES

SALEM MCDOUNOUGH 1995 CORLEY

DIEHL D68 2001 ATLAS COPCO GA160 L&M 100-HC

KILNS: NUMEROUS BULLET WELDERS & LEADS; OXY/ACETYLENE SETS; KYSOR JOHNSON J HORIZONTAL METAL CUTTING BANDSAW ON PULLEY SYSTEM WELLONS APPROX 36’X82’ DOUBLE TRACK KILN, STEAM FIRED, ALL ALUMINUM BOLT W/STEEL RACK; HORIZONTAL BANDSAW; SHOP DRILL PRESSES; DE TOGETHER, (9) ALUMINUM FANS W/15 HP/880 RPM MOTORS, 4” KILN COILS, GRINDERS; PITTSBURGH 1-TON TELESCOPING GANTRY CRANE; RIDGID MOISTURE SYSTEM, PLC CONTROLS & ELECTRICS, PARTIAL CONTROL HOUSE 1822-1 PIPE THREADER, RIDGID 300 PIPE THREADER; PARKER FLUID COE APPROX 20’X100’ SINGLE TRACK KILN, STEAM FIRED, ALL ALUMINUM BOLT CONNECTORS HYDRAULIC HOSE PRESS W/ENERPAC ZU4 PUMP; GATES TOGETHER, (11) 6’ ALUMINUM FANS W/15 HP/880 RPM MOTORS, 4” KILN COILS, 420 HOSE PRESS; STEEL TABLES & VISES; BOTTLE RACK; OIL TRANSFER & VARIABLE SPEED DRIVES, CONTROLS, ELECTRICS, PARTIAL CONTROL HOUSE WATER PUMPS, FLAMMABLES CABINETS; PARTS WASHER; ROTARY PARTS BIN; DELTA 15 JOINTER; GRIZZLY SINGLE BAG DUST COLLECTORS; BANDING (200+) 45”W X 108”L OVERALL 4” TUBE KILN CARTS W/6’ CENTERS CHOPPERS & CARTS BOILERS: TOOLS- STORES: 1976 TRANE TWIN CELL HOG FUEL FIRED BOILER, 300 PSI, 40,000 LB/HR, 5,338 SQ FT (2) CLIMAX 65 KEY MILLS; MILWAUKEE MAG DRILL; GREENLEE 555 SPEED HEATING SURFACE, PRE-HEATING, WELLONS HEAVY ASH CELL, STICKLE DEAERATING BENDER; GREENLEE 1989 DIELESS CRIMPER; GREENLEE 795 CABLE FEED WATER HEATER, WATER MAKE UP SYSTEM, FUEL SURGE BINS & AUGERS, FLY BENDER; BURNDY COMPRESSION SYSTEM; LARGE QUANTITY OF AIR & ASH RECOVERY SYSTEM W/75 HP ID FAN & 40 HP FD FAN, 340 TUBE HEAT POWER TOOLS; WRENCHES & SOCKETS; RIGGING; BANDERS & CARTS; EXCHANGER, CONTROLS & ELECTRICS (SAWMILL) PULLERS; WINCHES; COME-ALONGS; CHAIN HOISTS; AUTO LEVEL; RENS L900 LOG YARD METAL DETECTOR; MILL CHAIN; SPROCKETS; CYLINDERS; 1971 CLEAVER BROOKS CB200-400 PACKAGE BOILER, 250 PSI, 400 HP, 2,000 SQ FT BELTING; AIR & HYDRAULIC VALVES; STEEL STOCK; SHEAVES; SHAFTING; HEATING SURFACE, SIMPLEX BOILER FEED WATER SYSTEM, 36,000 LBS (VENEER MILL) REELS OF HOSE & WIRE; HYDRAULIC FITTINGS; ROLLS; CART WHEELS; NUTS ELECTRICS: & BOLTS; LARGE QUANITITY OF CONDUIT & FITTINGS; UHMW; QUANITITY OF BEARINGS ALLEN BRADLEY 9-SECTION MCC W/(46) SWITCHES; ALLEN BRADLEY 8-SECTION MCC W/(42) SWITCHES; ALLEN BRADLEY 5-SECTION MCC W/(25) SWITCHES; ALLEN BUILDINGS: BRADLEY 4-SECTION MCC W/(20) SWITCHES; ALLEN BRADLEY 3-SECTION MCC W/(11) SWITCHES; ALLEN BRADLEY 2-SECTION MCC W/(6) SWITCHES; ALLEN BRADLEY LOGIX APPROX 18’ EAVES X 45’W X 160’L WOOD FRAMED BUILDING W/METAL 5561 PLC; (16) WOODS E-TRAC AC INVERTERS TO 40 HP; (20+/-) ALLEN BRADLEY & ROOF, 6”X8” TREATED POST LEGS, SPRINKLERS (LUMBER COOLING SHED) TOSHIBA DRIVES TO 25 HP; STARTERS TO 200 HP; 110V-480V TRANSFORMERS; APPROX 20’ EAVES X 32’W X 100’L STEEL FRAMED BUILDING W/METAL BREAKERS TO 800 AMP; ELECTRICAL INVENTORY; (100+/-) MOTORS TO 200 HP; LARGE ROOF, PARTIAL SIDING & SQUARE TUBE LEGS (LUMBER COOLING SHED) WIRE & CONDUIT LOT APPROX 18’ EAVES X 28’W X 112’L WOOD FRAMED BUILDING W/METAL LOG DECK & TRANSFERS-LUMBER TRANSFERS-ROLLCASES-CONVEYORS: ROOF, PARTIAL SIDING & 6”X6” TREATED POST LEGS (LUMBER COOLING APPROX 42’ 5-STRAND H-CHAIN INFEED LOG DECK, S-DRIVE; APPROX 15’ 4-ARM LS&L SHED) W/MOTOR TO REX EARTH REDUCER; (2) APPROX 35’ 4-STRAND H-CHAIN INFEED LOG APPROX 22’ EAVES X 24’W X 90’L WOOD FRAMED BUILDING W/METAL TRANSFERS W/13’ 4-ARM LS&L; MOTOR TO REX ATLAS & FALK REDUCERS; APPROX ROOF, 6”X6” TREATED POST LEGS (LUMBER COOLING SHED) 150’ 4-STRAND H78 TIMBER DECLINE TRANSFER W/GEARHEAD MOTOR; NUMEROUS LUMBER TRANSFERS TO 80’; NUMEROUS ROLLCASES TO 30’; NUMEROUS CHAIN & BELT CONVEYORS TO 100’ MISC. MILL MACHINERY & SUPPORT EQUIPMENT: MAR 4-TON BOLT TOGETHER TRAILER LOADER W/ROBBINS & MEYERS HOIST; 13’ 4-ARM MECHANICAL BREAKDOWN HOIST; NUMEROUS HYDRAULIC UNITS; FROSTO TANNER TANK; LOG YARD BUNKS BUCKETS; REACHES; BASKETS; PUSHERS; STEEL BOXES; TIRE CHAINS; ROLLING STOCK PARTS & SUPPLIES SHOP EQUIPMENT: MILLER BOBCAT 225 CC-CV, AC/DC 8,000 WATT WELDER GENERATOR ON S/A TRAILER; MILLER BIG 40 GAS ENGINE PORTABLE WELDER; LINCOLN IDEALARC R300R WELDER; MILLERMATIC 250X WELDER; MILLER 400SS WELDER; WEST COAST SHEET METAL SIGNODE STYLE 1.800.426.3008 - 425.486.1246 - murphyauction.com