Custom Graphics Install B
Total Page:16
File Type:pdf, Size:1020Kb
Custom Graphic Install Instructions V1.24 Before you can load any custom images onto your Doodle Jump game you must first create them. There are many different ways to create the images you will need but you will need a computer to do the final preparations to the files. No computer? No problem, contact our service de- partment for more options at (716) 759-0360. Doodle Jump custom gift card image creation and loading instructions, Page 1 For software version 1.18 through 1.24 only! Step 1: Create/Capture the card image. To capture a image of your custom gift card you can use a digital camera to take a picture or use a digital scanner and scan the image into your computer. You can download them using Google™ Images search engine at www.google.com and select images then search for your gift card logos. You can also use graphic programs like Photoshop™ or Illustrator™ from Adobe to create your own gift cards. Things to remember when getting your images is they must be at least 444x278 pixels and should be in either jpeg, tga, or png formats. Examples on how to use Google image: Lets say you want to give Applebee's gift cards away. Using your computer and an Internet browser go to the Google™ website at www.google.com and left click on at the top of the page “IMAGES”. You should see a camera in the search box (the box with the magnifying glass). Now type “Applebees gift card”. There are many choices to pick from but we will select the first one. Google™ reports the resolution as 500x500, which is higher than the minimum required. Left click on the image and the image will now be displayed in the center. Right click on the image and left click on “save picture as”. Change the file name to “Applebee”. No need to add any extensions to the file name. Now select where you wish to save the file. In Windows graphics are stored either in “My Pictures” or “Pictures” depending on which version you are running. Make note where it is saving it to and click “save”. Congratulations, you have just finished obtaining your graphic image! Doodle Jump custom gift card image creation and loading instructions, Page 2 Another way to capture your gift card image is to simply take a picture of it with either your cell phone’s camera or a digital camera. Refer to your owner’s manual for your device on how to take picture and transfer it to your computer. When taking the pic- ture, you want the camera to be steady and parallel to the gift card. It should be far enough back that the image is completely filled with the gift card and centered. Step 2: Getting the image to a flash drive. Now that you have captured your image of the gift card, it is time to create the files you will need for the game to display them. This step will require a flash drive of some type. The size of the flash drive should be at least 4 times larger than the image file you downloaded or created. Depending on your operating system these next few steps can differ. These next few steps are for operators using a Microsoft Windows™ products. Using your mouse press the left mouse button on either “My Com- puter” or click on the start button and select “Computer”. From the previous step select the drive that con- tains your captured or created image. Normally picture files are stored in either “Pictures” or “My Pictures” on drive letter C. Find the file you saved or created and use your right mouse button and click on it. A requestor will ask you what you wish to do with it. Doodle Jump custom gift card image creation and loading instructions, Page 3 Click with the left mouse button on “COPY” Insert your flash drive into a free USB port on your computer. If your computer did not automatically open a window to show the contents of the flash drive, using your mouse, double click with your left mouse button on “My Computer” or left click on your start button and select “Computer”. You should now see your different drive devices. Look for your flash drive under “removable devices” and use your left mouse button and double click on it. With your right mouse button, click anywhere that is blank inside the window that opened. Click the left mouse button on “paste” Right Click here Doodle Jump custom gift card image creation and loading instructions, Page 4 Now with the right mouse button click on the file that just was copied to the flash drive. A new re- questor will appear and with the left mouse button, click on “rename” and the file name will be high- lighted in a color. Now type “card1”. Be sure that you do not add another “.jpg” at the end of the file name. We need to repeat these steps 2 more times but each time using the file names “card2” and “smallcard”. You only need to paste the file again and then rename it. No need to re-copy it each time. When finished, you should have 3 different files as shown. Doodle Jump custom gift card image creation and loading instructions, Page 5 Take the flash drive to your game. With the game on and in attract mode, open the upper coin door and reach in and plug your USB flash drive into the first USB slot. Now press the “DIAG” button to enter Programming. Using the “UP” and “DOWN” buttons high light “PAYOUT ADJUSTMENTS MENU” and press “DIAG” button again. Now high light the option “CARD DISPENSER” and press the “DIAG”. Select “YES” using the “UP” or “DOWN” buttons and press “DIAG” button again. Card dispenser should now be on and ticket options should be grayed out. Payout Percent 30.0% Ticket Value 0.01000 Two Point Tickets Off Starting Jackpot 150 Progressive Jackpot Off Progressive Increment 1 Amusement Only Off Card Dispenser On Card Value 25 Card Display Custom Load Custom Card Images Exit Doodle Jump custom gift card image creation and loading instructions, Page 6 Now highlight “CARD VALUE” using the “UP” and “DOWN” buttons and press “DIAG” to select it. Use the “UP” and “DOWN” buttons and select the value of your gift card. When correct, press the “DIAG” button to save it. Payout Percent 30.0% Card Value? Ticket Value 0.01000 Two Point Tickets Off 5 Starting Jackpot 150 10 Progressive Jackpot Off 15 Progressive Increment 1 20 Amusement Only Off 25 Card Dispenser On 30 Card Value 5 35 Card Display Custom 40 Load Custom Card Images 45 50 Exit Cancel Now high light the “LOAD CUSTOM CARD IMAGES” using the “UP” and “DOWN” buttons and press “DIAG” button. If you correctly named the files on the flash drive you should see 3 pictures. If any file name is incorrect, you will see a red X in place of your custom image. You can select border or no border, which ever looks best to you. Use the “UP” and “DOWN” buttons and high light either border or no boarder and hit select. Now high light “ACCEPT” and press “DIAG” button again. card1.jpg smallcard.jpg card2.jpg Doodle Jump custom gift card image creation and loading instructions, Page 7 Now highlight “CARD DISPLAY” and press “DIAG” button. Use the “UP” and “DOWN” buttons and high light “CUSTOM”. Press the “DIAG” button to save. Now press the “DOWN” button until “EXIT” is displayed and press the “DIAG” button to return to the main menu. Payout Percent 30.0% Ticket Value 0.01000 Two Point Tickets Off Starting Jackpot 150 Progressive Jackpot Off Progressive Increment 1 Amusement Only Off Card Dispenser On Card Value 5 Card Display Custom Load Custom Card Images Exit Move the cursor until “Coin Adjustments Menu” is highlighted and press the “DIAG” button. Change the option “Currency Input” to either “Swipes” if using a card swipe system, “Tokens” if using tokens, or “Actual Currency” if using cash. Press “TEST” until the attract screen appears. Your image is now loaded and will be displayed during play. You can go back and crop your image to better appear on your game. You can also show both a front and backside of the card by using two different images for card1 and card2. Just be sure they are la- beled with the correct file name. Always keep the image for smallcard the front of the gift card. Rev C - 1.18 thru 1.24 software revision is required. .