DOCSLIB.ORG

Gw2018 Portugal How to Build A

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Gw2018 Portugal How to Build A Community Networks GLOBALGLOBAL INFORMATION INFORMATION 2018 2018 SOCIETY WATCH 2018 THE 43 COUNTRY REPORTS included in this year’s Global SOCIETYCOMMUNITY WATCH NETWORKS 2018 Information Society Watch (GISWatch) capture the different GLOBAL INFORMATION SOCIETY WATCH experiences and approaches in setting up community networks across the globe. They show that key ideas, CommunityCommunity Networks Networks such as participatory governance systems, community ownership and skills transfer, as well as the “do-it-yourself” spirit that drives community networks in many different contexts, are characteristics that lend them a shared purpose and approach. The country reports are framed by eight thematic reports that deal with critical issues such as the regulatory framework necessary to support community networks, sustainability, local content, feminist infrastructure and community networks, and the importance of being aware of “community stories” and the power structures embedded in those stories. GLOBAL INFORMATION SOCIETY WATCH GLOBAL INFORMATION SOCIETY WATCH GLOBAL INFORMATION SOCIETY WATCH 2018 Report www.GISWatch.org International Development Research Centre Centre de recherches pour le développement international AssociAtion for Progressive communicAtions (APc) A SSOCI ATION FOR PROGRESSIVE COMMUNIC ATIONS (AP C) And internAtionAl develoPment reseArch centre (idrc) Tapa_GISW_2018.indd 1 12/10/18 12:44 Global Information Society Watch 2018 International Development Research Centre Centre de recherches pour le développement international Global Information Society Watch 2018 Community Networks Operational team GISWatch 2018 advisory committee Roxana Bassi (APC) Carlos Baca (REDES) Valeria Betancourt (APC) Luca Belli (FGV) Kathleen Diga (APC) Jane Coffin (ISOC) Alan Finlay (APC) Kazanka Comfort (Fantsuam Foundation) Michael Jensen (APC) Stéphane Couture (York University) Carlos Rey-Moreno (APC) Alison Gillwald (Research ICT Africa) Michuki Mwangi (ISOC) APC project coordination team Leandro Navarro (PANGEA) Namita Aavriti (APC) Dorothy Okello (WOUGNET/Makerere University) Roxana Bassi (APC) Nico Pace (AlterMundi) Valeria Betancourt (APC) Steve Song (Village Telco/Rhizomatica) Kathleen Diga (APC) Ritu Srivastava (DEF) Anriette Esterhuysen (APC) Flavia Fascendini (APC) Project coordinator Alan Finlay (APC) Kathleen Diga / Roxana Bassi (APC) Chat Garcia Ramilo (APC) Michael Jensen (APC) Editor Carlos Rey-Moreno (APC) Alan Finlay Assistant editor and proofreading Lori Nordstrom (APC) Publication production support Cathy Chen Graphic design Monocromo [email protected] Phone: +598 2400 1685 Cover illustration Matías Bervejillo This work was carried out with the aid of a grant from the International Development Research Centre (IDRC), Ottawa, Canada, as part of the APC project “Community access networks: How to connect the next billion to the Internet”. More information at: https://www.apc.org/en/project/ local-access-networks-can-unconnected-connect-themselves The views expressed herein do not necessarily represent those of IDRC or its Board of Governors. International Development Research Centre Centre de recherches pour le développement international Financial support provided by This edition of GISWatch came into being alongside a brand new baby boy. Welcome to the world, Ronan Diga! Published by APC 2018 Printed in USA Creative Commons Attribution 4.0 International (CC BY 4.0) https://creativecommons.org/licenses/by/4.0/ Some rights reserved. Global Information Society Watch 2018 web and e-book ISBN 978-92-95113-06-0 APC-201810-CIPP-R-EN-DIGITAL-296 Disclaimer: The views expressed in the introduction, thematic and country reports of GISWatch are not necessarily the views of APC or of its members. PORTUGAL HOW TO BUILD A WIRELESS NETWORK AGAINST ALL ODDS: THE CASE OF WIRELESSPT was always looked down on with prejudice or at least WirelessPT Miguel Vieira seen as something that could not make money and was https://wirelesspt.net therefore unimportant. Any potential political champi- ons one could find would always want public credit and visibility for their personal brand in exchange for Introduction their support, sometimes demanding control and try- ing to dictate how the project would work. Over the years developing WirelessPT, I found that the The obstacles could be summed up as: no biggest difficulties people mention are how to start a funding, archaic politics, isolation, personal egos, wireless network, and uncertainty over how people selfishness and no support. And without help, for the will embrace the concept and, ultimately, adhere to it. end-user the investment would be costly. Everyone at some point has specific difficulties, but At least – and although with some boundaries – we all share these deterrents. the 2.4 and 5 Ghz spectrum was free and available for To give you an idea about the adversity I faced, use by citizens. this was the scenario: I was 5,500 km away from the town of Moitas Venda where the project would be deployed. Moitas Venda is a civil parish in central Por- What exactly is WirelessPT? tugal, 6.70 km2 in size and with a population of 866 WirelessPT.net is an open source mesh network people. The dominant employer is a local tannery, but project created, developed and registered by me. In the parish also manufactures tarpaulins and textiles, a mesh network, all routers and/or routing devices and produces marble used in construction. Despite that are added to it will automatically communicate this industrial dynamism, the parish has not seen a between themselves in a similar fashion to how lot of investment, and has little infrastructure to at- the internet works, in this way creating an identical tract new industries. communication system like the internet but without Due to its geography,1 the town has always been cables or wires or the need for human maintenance. known for difficulties in implementing projects us- This kind of network concept allows us to create a ing radio frequencies. I had only Pedro Maximiano, a network and expand it every time we activate another long-time friend and project partner, to help me, as I router nearby. faced a disgruntled community with low tech skills, A key advantage is that it does not cost much to displeased about wireless services following a pre- develop and implement. At the same time, the net- viously failed wireless project in which some had work cannot be completely shut down since no one invested, and old blocked and damaged hardware controls all routers or access points and there is no from that project that I could reuse. No one wanted central control point. If one access point goes offline, to or could spend money on wireless networking any- the network automatically reorganises itself without more. On top of it, I had a prejudice towards wireless the dead access point. networking, and knew very little about it. The router or routing device used is exactly the I was told by someone in the town that since I was same type of router that we can buy in any regular not living there I was clueless about how things need- computer store. However, we use a very specific type ed to be done. of software and firmware developed by me which The country context was also hardly amenable to I have named “mvwrt”. This software makes the setting up a user-developed and managed community network “self form” and “self heal” in case of any network that, in the case of WirelessPT, drew on the connectivity rupture – any router added to it will auto- potential of open source software to achieve its aims. matically detect the rest of the nearby mesh network, Policies in favour of community networks had never and add itself to it while simultaneously expanding it. existed. The idea of sharing resources in a community The more routers the network has, the wider its coverage will be. Some of these routers can be or will be connected to the internet and in this way all Wire- 1 It is situated between several small mountains and is elevated compared to other towns. lessPT.net users will also have internet access. 214 / Global Information Society Watch This type of escalation has been successfully becomes interested in expanding the network in its implemented in other places such as Moita, near franchise-type system to other towns. Ultimately the Marinha Grande, and Videla, which established a 3.5 platform would be used to unify all community wire- km link to Moitas Venda with up to 6 Mbits at 2.4 Ghz. less networks in Portugal. The project is designed to be deployed in a similar fashion to a franchise system where every new local Getting your feet wet, even if you can’t swim network will follow the documentation on the project My first trip to Moitas Venda to start the initial deploy- wiki and will have its administrator as the first “node ment was the hardest. I had only three weeks to fix owner”. A node owner is any person that at his or her and deploy old broken hardware that was left aban- own expense sets up a wireless access point and ei- doned by the previous community wireless project, ther joins or initiates the project in a new location and and I had no skills or knowledge on how to manage it. who will abide by a user and participant-specific peer We also had to talk to a number of disgruntled wire- agreement. less users and investors who had been involved in the At the time of writing, only two open source, previous project – it had failed to ensure sustainabili- community-managed wireless projects had been suc- ty and basic functionality in the town – and we had to cessfully implemented in Portugal. Only WirelessPT convince them to try something different. is still actively maintained and regulated by a com- In January 2011 – with the assistance of Nuno prehensive user agreement. The other community Carvalho and the extremely crucial help from Pedro network has always been closed to a group of de- Maximiano who always helped set up access points velopers who administrate it like a private internet and promoted the project over the years by talking to service provider (ISP) and have never made it attrac- people in person, by email, using social media and tive to the end-user.
Load more

Recommended publications
  • A Comprehensive Study of Routing Protocols Performance with Topological Changes in the Networks Mohsin Masood Mohamed Abuhelala Prof
    A comprehensive study of Routing Protocols Performance with Topological Changes in the Networks Mohsin Masood Mohamed Abuhelala Prof. Ivan Glesk Electronics & Electrical Electronics & Electrical Electronics & Electrical Engineering Department Engineering Department Engineering Department University of Strathclyde University of Strathclyde University of Strathclyde Glasgow, Scotland, UK Glasgow, Scotland, UK Glasgow, Scotland, UK mohsin.masood mohamed.abuhelala ivan.glesk @strath.ac.uk @strath.ac.uk @strath.ac.uk ABSTRACT different topologies and compare routing protocols, but no In the modern communication networks, where increasing work has been considered about the changing user demands and advance applications become a functionality of these routing protocols with the topology challenging task for handling user traffic. Routing with real-time network limitations. such as topological protocols have got a significant role not only to route user change, network congestions, and so on. Hence without data across the network but also to reduce congestion with considering the topology with different network scenarios less complexity. Dynamic routing protocols such as one cannot fully understand and make right comparison OSPF, RIP and EIGRP were introduced to handle among any routing protocols. different networks with various traffic environments. Each This paper will give a comprehensive literature review of of these protocols has its own routing process which each routing protocol. Such as how each protocol (OSPF, makes it different and versatile from the other. The paper RIP or EIGRP) does convergence activity with any change will focus on presenting the routing process of each in the network. Two experiments are conducted that are protocol and will compare its performance with the other.
    [Show full text]
  • RIP: Routing Information Protocol a Routing Protocol Based on the Distance-Vector Algorithm
    Laboratory 6 RIP: Routing Information Protocol A Routing Protocol Based on the Distance-Vector Algorithm Objective The objective of this lab is to configure and analyze the performance of the Routing Information Protocol (RIP) model. Overview A router in the network needs to be able to look at a packet’s destination address and then determine which of the output ports is the best choice to get the packet to that address. The router makes this decision by consulting a forwarding table. The fundamental problem of routing is: How do routers acquire the information in their forwarding tables? Routing algorithms are required to build the routing tables and hence forwarding tables. The basic problem of routing is to find the lowest-cost path between any two nodes, where the cost of a path equals the sum of the costs of all the edges that make up the path. Routing is achieved in most practical networks by running routing protocols among the nodes. The protocols provide a distributed, dynamic way to solve the problem of finding the lowest-cost path in the presence of link and node failures and changing edge costs. One of the main classes of routing algorithms is the distance-vector algorithm. Each node constructs a vector containing the distances (costs) to all other nodes and distributes that vector to its immediate neighbors. RIP is the canonical example of a routing protocol built on the distance-vector algorithm. Routers running RIP send their advertisements regularly (e.g., every 30 seconds). A router also sends an update message whenever a triggered update from another router causes it to change its routing table.
    [Show full text]
  • WMM - Wireless Mesh Monitoring
    WMM - Wireless Mesh Monitoring Ricardo Pinto [email protected] Instituto Superior T´ecnico Advisor: Professor Lu´ısRodrigues Abstract. Wireless Mesh Networks (WMN) have emerged as a poten- tial technology to quickly deploy a wireless infrastructure that is self- healing, self-configured, and self-organized. This report makes an in- troduction to WMNs, their protocols and some existing deployments. Then the problem of monitoring the operation of these networks, is ad- dressed by making a brief survey on some relevant network monitoring approaches and by pointing directions of future work in this area. 1 Introduction Within the short span of a decade, wireless networks have revolutionized the way we use our devices, bringing us cable-free mobility, always-on connectiv- ity, and reduced infrastructure costs. In the past few years, we have witnessed a tremendous growth of wireless LANs (WLANs) mainly due to their ease of deployment and maintenance. However, all wireless access points (APs) need to be connected to the wired backbone network and, therefore, WLANs still re- quire extensive infrastructure and careful planning in order to minimize their costs. Wireless Mesh Networks (WMNs) have emerged as a key technology to ease the deployment of wireless networks. Unlike traditional WiFi networks, in WMNs only a subset of APs are required to be connected to the wired network. As a result, only a subset of the nodes need wired infrastructure (these nodes serve as gateways) while the other mesh nodes have the ability to route mes- sages to the gateways, thus providing also access to the Internet. A WMN is a dynamically self-organized and self-configured network in which the nodes au- tomatically establish and maintain connectivity.
    [Show full text]
  • Babel Routing Protocol for Omnet++ More Than Just a New Simulation Module for INET Framework
    Babel Routing Protocol for OMNeT++ More than just a new simulation module for INET framework Vladimír Veselý, Vít Rek, Ondřej Ryšavý Department of Information Systems, Faculty of Information Technology Brno University of Technology Brno, Czech Republic {ivesely, rysavy}@fit.vutbr.cz; [email protected] Abstract—Routing and switching capabilities of computer Device discovery protocols such as Cisco Discovery networks seem as the closed environment containing a limited set Protocol (CDP) and Link Layer Discovery Protocol of deployed protocols, which nobody dares to change. The (LLDP), which verify data-link layer operation. majority of wired network designs are stuck with OSPF (guaranteeing dynamic routing exchange on network layer) and In this paper, we only focus on a Babel simulation model. RSTP (securing loop-free data-link layer topology). Recently, Babel is increasingly more popular seen as the open-source more use-case specific routing protocols, such as Babel, have alternative to Cisco’s Enhanced Interior Gateway Routing appeared. These technologies claim to have better characteristic Protocol (EIGRP). Babel is also considered a better routing than current industry standards. Babel is a fresh contribution to protocol for mobile networks comparing to Destination- the family of distance-vector routing protocols, which is gaining its Sequenced Distance-Vector (DSDV) or Ad hoc On-Demand momentum for small double-stack (IPv6 and IPv4) networks. This Distance-Vector (AODV) routing protocols. Babel is a hybrid paper briefly describes Babel behavior and provides details on its distance vector routing protocol. Although it stems from a implementation in OMNeT++ discrete event simulator. classical distributed Bellman-Ford algorithm, it also adopts certain features from link-state protocols, such as proactive Keywords—Babel, OMNeT++, INET, Routing, Protocols, IPv6, neighbor discovery.
    [Show full text]
  • What Is Administrative Distance?
    What Is Administrative Distance? Contents Introduction Prerequisites Requirements Components Used Conventions Select the Best Path Default Distance Value Table Other Applications of Administrative Distance Related Information Introduction Most routing protocols have metric structures and algorithms that are not compatible with other protocols. In a network with multiple routing protocols, the exchange of route information and the capability to select the best path across the multiple protocols are critical. Administrative distance is the feature that routers use in order to select the best path when there are two or more different routes to the same destination from two different routing protocols. Administrative distance defines the reliability of a routing protocol. Each routing protocol is prioritized in order of most to least reliable (believable) with the help of an administrative distance value. Prerequisites Requirements Cisco recommends that you have knowledge of these topics: ● Basics of the routing process. Refer to Routing Basics in Internetworking Technologies Handbook. Components Used This document is not restricted to specific software and hardware versions. Conventions Refer to Cisco Technical Tips Conventions for more information on document conventions. Select the Best Path Administrative distance is the first criterion that a router uses to determine which routing protocol to use if two protocols provide route information for the same destination. Administrative distance is a measure of the trustworthiness of the source of the routing information. Administrative distance has only local significance, and is not advertised in routing updates. Note: The smaller the administrative distance value, the more reliable the protocol. For example, if a router receives a route to a certain network from both Open Shortest Path First (OSPF) (default administrative distance - 110) and Interior Gateway Routing Protocol (IGRP) (default administrative distance - 100), the router chooses IGRP because IGRP is more reliable.
    [Show full text]
  • Bigp- a New Single Protocol That Can Work As an Igp (Interior Gateway Protocol) As Well As Egp (Exterior Gateway Protocol)
    Manuscript Number: IJV2435 BIGP- A NEW SINGLE PROTOCOL THAT CAN WORK AS AN IGP (INTERIOR GATEWAY PROTOCOL) AS WELL AS EGP (EXTERIOR GATEWAY PROTOCOL) Isha Gupta ASET/CSE Department, Noida, India [email protected] the now obsolete Exterior Gateway Protocol (EGP), as Abstract- EGP and IGP are the key components the standard exterior gateway-routing protocol used in the of the present internet infrastructure. Routers in global Internet. BGP solves serious problems with EGP a domain forward IP packet within and between and scales to Internet growth more efficiently [1,11]. domains. Each domain uses an intra-domain routing protocol known as Interior Gateway Protocol (IGP) like IS-IS, OSPF, RIP etc to populate the routing tables of its routers. Routing information must also be exchanged between domains to ensure that a host in one domain can reach another host in remote domain. This role is performed by inter-domain routing protocol called Exterior Gateway Protocol (EGP). Basically EGP used these days is Border Gateway Protocol (BGP). Basic difference between the both is that BGP has smaller convergence as compared to the IGP’s. And IGP’s on the other hand have lesser scalability as compared to the BGP. So in this paper a proposal to create a new protocol is given which can act as an IGP when we consider inter-domain transfer of traffic and acts as BGP when we consider intra-domain transfer of traffic. Figures 1: BGP topology In the above figure a simple BGP topology is shown. It consists of three autonomous systems which are linked together using serial cables.
    [Show full text]
  • Chapter 4 Network Layer
    Chapter 4 Network Layer A note on the use of these ppt slides: We’re making these slides freely available to all (faculty, students, readers). Computer They’re in PowerPoint form so you see the animations; and can add, modify, and delete slides (including this one) and slide content to suit your needs. Networking: A Top They obviously represent a lot of work on our part. In return for use, we only ask the following: Down Approach v If you use these slides (e.g., in a class) that you mention their source th (after all, we’d like people to use our book!) 6 edition v If you post any slides on a www site, that you note that they are adapted Jim Kurose, Keith Ross from (or perhaps identical to) our slides, and note our copyright of this Addison-Wesley material. March 2012 Thanks and enjoy! JFK/KWR All material copyright 1996-2012 J.F Kurose and K.W. Ross, All Rights Reserved Network Layer 4-1 Chapter 4: outline 4.1 introduction 4.5 routing algorithms 4.2 virtual circuit and § link state datagram networks § distance vector 4.3 what’s inside a router § hierarchical routing 4.4 IP: Internet Protocol 4.6 routing in the Internet § datagram format § RIP § IPv4 addressing § OSPF § BGP § ICMP § IPv6 4.7 broadcast and multicast routing Network Layer 4-2 Interplay between routing, forwarding routing algorithm determines routing algorithm end-end-path through network forwarding table determines local forwarding table local forwarding at this router dest address output link address-range 1 3 address-range 2 2 address-range 3 2 address-range 4 1 IP destination
    [Show full text]
  • RFC 8966: the Babel Routing Protocol
    Stream: Internet Engineering Task Force (IETF) RFC: 8966 Obsoletes: 6126, 7557 Category: Standards Track Published: January 2021 ISSN: 2070-1721 Authors: J. Chroboczek D. Schinazi IRIF, University of Paris-Diderot Google LLC RFC 8966 The Babel Routing Protocol Abstract Babel is a loop-avoiding, distance-vector routing protocol that is robust and efficient both in ordinary wired networks and in wireless mesh networks. This document describes the Babel routing protocol and obsoletes RFC 6126 and RFC 7557. Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc8966. Copyright Notice Copyright (c) 2021 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
    [Show full text]
  • Nsa Cybersecurity Report
    NATIONAL SECURITY AGENCY CYBERSECURITY REPORT A GUIDE TO BORDER GATEWAY PROTOCOL (BGP) BEST PRACTICES A TECHNICAL REPORT FROM NETWORK SYSTEMS ANALYSIS BRANCH U/OO/202911-18 PP-18-0645 10 September 2018 1 s NSA CYBERSECURITY REPORT DOCUMENT CHANGE HISTORY DATE VERSION DESCRIPTION 07/24/18 01 Initial Release 08/24/18 02 Re-templated DISCLAIMER OF WARRANTIES AND ENDORSEMENT The information and opinions contained in this document are provided “as is” and without any warranties or guarantees. Reference herein to any specific commercial products, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government, and shall not be used for advertising or product endorsement purposes. U/OO/202911-18 PP-18-0645 10 September 2018 2 s NSA CYBERSECURITY REPORT A Guide to Border Gateway Protocol (BGP) Best Practices CONTACT INFORMATION Client Requirements and Inquiries or General Cybersecurity Inquiries CYBERSECURITY REQUIREMENTS CENTER (CRC) 410-854-4200 [email protected] U/OO/202911-18 PP-18-0645 10 September 2018 3 s NSA CYBERSECURITY REPORT Executive Summary The dominant routing protocol on the Internet is the Border Gateway Protocol (BGP). BGP has been deployed since the commercialization of the Internet and version 4 of BGP is over a decade old. BGP works well in practice, and its simplicity and resilience enabled it to play a fundamental role within the global Internet. However, BGP inherently provides few performance or security protections.
    [Show full text]
  • Networks G22.2262-001
    Data Communication & Networks G22.2262-001 Session 7 - Main Theme Networks: Part II Routing Algorithms and Routing Protocol Dr. Jean-Claude Franchitti New York University Computer Science Department Courant Institute of Mathematical Sciences 1 Agenda Routing Strategies Interplay Between Routing and Forwarding Graph Abstraction Routing Algorithm Classification Link-State Routing (LS) Algorithm Distance Vector (DV) Algorithm Comparison of LS and DV Algorithms Hierarchical Routing Interconnected ASes Inter-AS Tasks Intra-AS Routing Internet Inter-AS Routing – Border Gateway Protocol Why Different Intra- and Inter-AS Routing? 2 1 Part I Routing Strategies 3 Routing Strategies Fixed Flooding Random Adaptive 4 2 Fixed Routing Single permanent route for each source to destination pair Determine routes using a least cost algorithm Route fixed, at least until a change in network topology 5 Fixed Routing Tables 6 3 Flooding No network info required Packet sent by node to every neighbor Incoming packets retransmitted on every link except incoming link Eventually a number of copies will arrive at destination Each packet is uniquely numbered so duplicates can be discarded Nodes can remember packets already forwarded to keep network load in bounds Can include a hop count in packets 7 Flooding Examples 8 4 Properties of Flooding All possible routes are tried Very robust At least one packet will have taken minimum hop count route Can be used to set up virtual circuit All nodes are visited Useful to distribute information
    [Show full text]
  • BGP: Border Gateway Protocol an Interdomain Routing Protocol
    LAB 8 BGP: Border Gateway Protocol An Interdomain Routing Protocol OBJECTIVES The objective of this lab is to simulate and study the basic features of an interdomain routing protocol called Border Gateway Protocol (BGP). OVERVIEW The Internet is organized as a set of routing domains. Each routing domain is called an autonomous system (AS). Each AS is controlled by a single administrative entity (e.g., an AS of 75 a single service provider). Each AS has a unique 16-bit identifi cation number. This number is assigned by a central authority. An AS uses its own intradomain routing protocol (e.g., RIP or OSPF). An AS establishes routes with other ASs through interdomain routing protocols. The Border Gateway Protocol (BGP) is one of the well-known interdomain routing protocols. The main goal of BGP is to fi nd any path to the destination that is loop-free. This is different from the common goal of intradomain routing protocols, which is to fi nd an optimal route to the destination based on a specifi c link metric. The routers that connect different ASs are called border gateways . The task of the border gateways is to forward packets between ASs. Each AS has at least one BGP speaker. BGP speakers exchange reachability information among ASs. BGP advertises the complete path to the destination AS as an enumerated list. In this way, routing loops can be avoided. A BGP speaker can also apply some policies such as balancing the load over the neighboring ASs. If a BGP speaker has a choice of several different routes to a destination, it will advertise the best one according to its own local policies.
    [Show full text]
  • BATSEN: Modifying the BATMAN Routing Protocol for Wireless Sensor Networks
    Rochester Institute of Technology RIT Scholar Works Theses 5-8-2018 BATSEN: Modifying the BATMAN Routing Protocol for Wireless Sensor Networks Nelson Henry Powell III [email protected] Follow this and additional works at: https://scholarworks.rit.edu/theses Recommended Citation Powell, Nelson Henry III, "BATSEN: Modifying the BATMAN Routing Protocol for Wireless Sensor Networks" (2018). Thesis. Rochester Institute of Technology. Accessed from This Thesis is brought to you for free and open access by RIT Scholar Works. It has been accepted for inclusion in Theses by an authorized administrator of RIT Scholar Works. For more information, please contact [email protected]. BATSEN: Modifying the BATMAN Routing Protocol for Wireless Sensor Networks By: Nelson Henry Powell III Committee Members: Dr. Sumita Mishra Dr. Yin Pan Dr. Andres Kwasinski In partial fulfillment of the requirements for the degree of Master of Science in Computing Security Rochester Institute of Technology B. Thomas Golisano College of Computing & Information Sciences Department of Computing Security May 8th, 2018 Acknowledgments I’d like to take this opportunity to thank my wife, my love, Emilia; for putting up with the deployments, active duty, and working two jobs, all while going back to school to complete this degree. None of this would have been possible without your love and support. You are my motivation for being a better me. To my children, Connor and Iliana, for teaching me to look at the world as if it were for the first time; and for all the snuggles, hugs, and kisses that happily kept me from my school work. You are both my favorite and most important accomplishments in my life.
    [Show full text]