Presentation Ballistics
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
STANDARD OPERATING PROCEDURES Revision 10.0
STANDARD OPERATING PROCEDURES Revision 10.0 Effective: November 10, 2020 Contents GTGC ADMINISTRATIVE ITEMS ............................................................................................................................................... 2 GTGC BOARD OF DIRECTORS: ............................................................................................................................................. 2 GTGC CHIEF RANGE SAFETY OFFICERS: ............................................................................................................................... 2 CLUB PHYSICAL ADDRESS: ................................................................................................................................................... 2 CLUB MAILING ADDRESS: .................................................................................................................................................... 2 CLUB CONTACT PHONE NUMBER ....................................................................................................................................... 2 CLUB EMAIL ADDRESS: ........................................................................................................................................................ 2 CLUB WEB SITE: ................................................................................................................................................................... 2 HOURS OF OPERATION ...................................................................................................................................................... -
Manson Precision Receiver Accurizing System
Manson Precision Receiver Accurizing System Rhomboidal and pavid Slim reinterred her sundries feign or municipalizes estimably. Bewhiskered and dorsiventral Shurlock often disorientates some suspiration jeopardously or gumshoe therapeutically. Toothsome Ned sometimes climb-downs any hypogyny objectivize thriftily. Austenite molecular structure in receiver accurizing your order to impact forging die was attached to It has a receiver accurizing and precision machined hand when needed. National Match Rifle, Serial No. Ups For Remington Centerfire Rifles MAGAZINE CLIP is best carrying cases for extra ammo; they spoke right knowledge the gun. Available in precision manufacturing, deeply serrated face! Winchester receiver accurizing system and precision receiver, butt plate screw only received and the systems, the barrel bore. Sold had designed by the receiver accurizing kit! If they are precision. Even directional change the receiver accurizing system for precise, fulton armory operating rod rail hand and flexibility. The replacement magazine followers should have three neat and evenly spaced spot welds attaching the stop to the follower. End to match category will enlarge due to. The magazines were rotated for even use and the rate of fire was measured during one of the twenty round bursts. It is precision receiver accurizing system was unable to do so you wont need to work was a manson. He fled to the jungle the same day. SPECS: Aluminum, anodized, red. The reamer has a FLOATING pilot that measures approx. Bush and receiver. SPECS: Stainless steel, belt finish. Tactical Forums discussion board www. Low maintenance, Parkerized finish resists corrosion and matches the rest of your rifle. This corn is therefore excellent turnover and fluctuate barely ever used. -
OTOLARYNGOLOGY/HEAD and NECK SURGERY COMBAT CASUALTY CARE in OPERATION IRAQI FREEDOM and OPERATION ENDURING FREEDOM Section III
Weapons and Mechanism of Injury in Operation Iraqi Freedom and Operation Enduring Freedom OTOLARYNGOLOGY/HEAD AND NECK SURGERY COMBAT CASUALTY CARE IN OPERATION IRAQI FREEDOM AND OPERATION ENDURING FREEDOM Section III: Ballistics of Injury Critical Care Air Transport Team flight over the Atlantic Ocean (December 24, 2014). Photograph: Courtesy of Colonel Joseph A. Brennan. 85 Otolaryngology/Head and Neck Combat Casualty Care 86 Weapons and Mechanism of Injury in Operation Iraqi Freedom and Operation Enduring Freedom Chapter 9 WEAPONS AND MECHANISM OF INJURY IN OPERATION IRAQI FREEDOM AND OPERATION ENDURING FREEDOM DAVID K. HAYES, MD, FACS* INTRODUCTION EXPLOSIVE DEVICES Blast Injury Closed Head Injury SMALL ARMS WEAPONS Ballistics Internal Ballistics External Ballistics Terminal Ballistics Projectile Design Tissue Composition and Wounding WEAPONRY US Military Weapons Insurgent Weapons SUMMARY *Colonel, Medical Corps, US Army; Assistant Chief of Staff for Clinical Operations, Southern Regional Medical Command, 4070 Stanley Road, Fort Sam Houston, Texas 78234; formerly, Commander, 53rd Medical Detachment—Head and Neck, Balad, Iraq 87 Otolaryngology/Head and Neck Combat Casualty Care INTRODUCTION This chapter is divided into four sections. It first small arms weapons caused just 6,013 casualties dur- examines the shifts in weapons used in the combat ing the same time.2 Mortars and rocket-propelled zones of Iraq and Afghanistan, and compares them to grenades, although highly destructive, injured 5,458 mechanisms of wounding in prior conflicts, including and killed only 341 US soldiers during the same time comparing the lethality of gunshot wounds to explo- (Table 9-1). In a review of wounding patterns in Iraq sive devices. -
Terminal Ballistics
Terminal ballistics Terminal ballistics, a sub-field of ballistics, is the study of the behavior and effects of a projectile when it hits its target.[1] Terminal ballistics is relevant both for small caliber pro- jectiles as well as for large caliber projectiles (fired from artillery). The study of extremely high velocity impacts is still very new and is as yet mostly applied to spacecraft design. 1 General An early result is due to Newton; the impact depth of any .32 ACP full metal jacket, .32 S&W Long wadcutter, .380 ACP projectile is the depth that a projectile will reach before jacketed hollow point stopping in a medium; in Newtonian mechanics, a pro- jectile stops when it has transferred its momentum to an equal mass of the medium. If the impactor and medium 2.1.1 Target shooting have similar density this happens at an impact depth equal to the length of the impactor. For short range target shooting on ranges up to 50 me- For this simple result to be valid, the arresting medium is ters (55 yd), aerodynamics is relatively unimportant and considered to have no integral shear strength. Note that velocities are low. As long as the bullet is balanced so it even though the projectile has stopped, the momentum is does not tumble, the aerodynamics are unimportant. For still transferred, and in the real world spalling and similar shooting at paper targets, the best bullet is one that will effects can occur. punch a perfect hole through the target. These bullets are called wadcutters. They have a very flat front, often with a relatively sharp edge along the perimeter. -
External Ballistics Primer for Engineers Part I: Aerodynamics & Projectile Motion
402.pdf A SunCam online continuing education course External Ballistics Primer for Engineers Part I: Aerodynamics & Projectile Motion by Terry A. Willemin, P.E. 402.pdf External Ballistics Primer for Engineers A SunCam online continuing education course Introduction This primer covers basic aerodynamics, fluid mechanics, and flight-path modifying factors as they relate to ballistic projectiles. To the unacquainted, this could sound like a very focused or unlikely topic for most professional engineers, and might even conjure ideas of guns, explosions, ICBM’s and so on. But, ballistics is both the science of the motion of projectiles in flight, and the flight characteristics of a projectile (1). A slightly deeper dive reveals the physics behind it are the same that engineers of many disciplines deal with regularly. This course presents a conceptual description of the associated mechanics, augmented by simplified algebraic equations to clarify understanding of the topics. Mentions are made of some governing equations with focus given to a few specialized cases. This is not an instructional tool for determining rocket flight paths, or a guide for long-range shooting, and it does not offer detailed information on astrodynamics or orbital mechanics. The primer has been broken into two modules or parts. This first part deals with various aerodynamic effects, earth’s planetary effects, some stabilization methods, and projectile motion as they each affect a projectile’s flight path. In part II some of the more elementary measurement tools a research engineer may use are addressed and a chapter is included on the ballistic pendulum, just for fun. Because this is introductory course some of the sections are laconic/abridged touches on the matter; however, as mentioned, they carry application to a broad spectrum of engineering work. -
BALLISTICS the Study of Ballistics Can Be Broken Down Into Three Parts: Internal Ballistics, External Ballistics, and Terminal Ballistics
Washington State Criminal Justice Training Commission - Patrol Rifle Instructor Course 2010 BALLISTICS The study of ballistics can be broken down into three parts: Internal Ballistics, External Ballistics, and Terminal Ballistics. Internal ballistics encompasses what occurs inside the rifle barrel from the time the primer ignites until the bullet leaves the barrel. External ballistics is the study of what happens to the bullet while it is in flight. Terminal ballistics is what occurs to a target, in this case a human being, when struck by a bullet. INTERNAL BALLISTICS Internal ballistics starts with the ignition of the primer at the base of the rifle cartridge. This ignition causes the gunpowder inside the cartridge to rapidly burn, building up internal pressure. As the internal pressure within the cartridge increases, the malleable brass cartridge case expands until it comes in contact with the chamber walls and the bolt face. With the cartridge case tight against the chamber, the increasing gas pressure created by the burning powder finds the path of least resistance by forcing the bullet out of the cartridge case and down the barrel. As the chamber pressure from the burning powder increases, this pressure accelerates the bullet to higher velocities. The speed of a bullet is referred to as Muzzle Velocity and is measured in Feet Per Second (fps). A Federal brand, 69gr. Match .223 BTHP bullet, for example, has a muzzle velocity of +/- 3000 fps as it leaves the muzzle of the rifle with a 20-inch barrel. 50,000 pounds per square inch (psi) of pressure, created by the rapidly burning gunpowder in the cartridge case accelerates the bullet to this speed. -
XXXV, 2 April-June 2019 Editor's Note 3 Prabhat Patnaik Some
XXXV, 2 April-June 2019 Editor’s Note 3 Prabhat Patnaik Some Comments About Marx’s Epistemology 7 Raghu Defence Procurement Today: Threat to Self-Reliance and Strategic Autonomy 16 CC Resolution (2010) On the Jammu & Kashmir Issue 57 EDITORIAL BOARD Sitaram YECHUry (EDItor) PrakasH Karat B.V. RAGHavULU ASHok DHAWALE ContribUtors Prabhat Patnaik is Emeritus Professor, Centre for Economic Studies and Planning, Jawaharlal Nehru University, New Delhi. Raghu is a Defence and Strategic Analyst based in New Delhi. For subscription and other queries, contact The Manager, Marxist, A.K. Gopalan Bhavan, 27-29 Bhai Veer Singh Marg, New Delhi 110001 Phone: (91-11) 2334 8725. Email: [email protected] Printed by Sitaram Yechury at Progressive Printers, A 21, Jhilmil Industrial Area, Shahdara, Delhi 110095, and published by him on behalf of the Communist Party of India (Marxist) from A.K.Gopalan Bhavan, 27-29 Bhai Veer Singh Marg, New Delhi 110001 Marxist, XXXV, 2, April-June 2019 RAGHU Defence Procurement Today Threat to Self-Reliance and Strategic Autonomy IntrodUction India was the world’s second largest importer of military hardware during 2014-18 accounting for 9.5 per cent of the total, having dropped from its first rank during 2009-13 and ceding top spot to Saudi Arabia which accounted for around 12.5 per cent of total imports during these last five years.1 However, this was mainly due to delays in deliveries of earlier orders to India, and a sporadic spurt in Saudi imports. One can therefore broadly say that India has been the world’s leading arms importer over the past decade. -
Establishment and Simulation Analysis on Internal Ballistics
International Conference on Materials Engineering and Information Technology Applications (MEITA 2015) Establishment and Simulation Analysis on Internal Ballistics Equations for Artillery Shrapnel Pan Shouli, Tong Ling, Ma Yucong 208 Research Institute of China Ordnance Industries, Beijing 102202, China Keywords: semi-combustible cartridge case, artillery shrapnel, internal trajectory equations, simulation analysis Abstract. Internal ballistic equations of artillery shrapnel are established on the basis of theoretical analysis, and equivalent method used for dealing with semi-combustible cartridge case, calculation program selects the Matlab software. The simulation results are accord with the experimental data, it shows design of equations and calculation program is reasonable and credible. Introductions With the requirements of development of artillery’s technology, the emergence semi combustible cartridge case is a perfect combination of all advantages of combustible cartridge case and metal cartridge case. In this paper, we studied internal ballistic of lower chamber pressure artillery firing with semi-combustible cartridge case. According to the tactical technical requirements, in order to increase the damage effect of projectiles, launch projectiles need larger firing range and enough large falling angle when hit the ground target, so it must obtain different firing velocity. It is obviously that only one kind of charge cannot meet the requirements, and it must be spited into several small parts of propellant charge with different mass and shapes. But the propellant charge is incomplete combustion under low pressure when the charge is reduced to a certain amount, then the velocity distribution increased and the less quality of charge, the more obviously phenomenon. In order to address this issue the method of mixed charge is adopted that is combination of thin and thick powder charging gunpowder. -
Magnificent Maggie!
August 2020 the $2.99 U.S./$3.99 Canada BlueBlue PressPress Magnificent Maggie! America’s Competitive Shooting Sweetheart Tells PageHer 56 Story SCAN TO SHOP 2 800-223-4570 • 480-948-8009 • bluepress.com Blue Press Which Dillon is Right for YOU? Page 28 Page 24 Page 20 Page 16 Page 12 SquareOur automatic-indexing Deal B The World’sRL 550C Most Versatile Truly theXL state 750 of the art, OurSuper highest-production- 1050 Our RLnewest 1100 reloader progressive reloader Reloader, capable of loading our XL 750 features rate reloader includes a features an innovative designed to load moderate over 160 calibers. automatic indexing, an swager to remove the crimp eccentric bearing drive quantities of common An automatic casefeeder is optional automatic from military primer system that means handgun calibers from available for handgun casefeeder and a separate pockets, and is capable of smoother operation with .32 S&W Long to .45 Colt. calibers. Manual indexing station for an optional reloading all the common less effort, along with an It comes to you from the and an optional magnum powder-level sensor. handgun calibers and upgraded primer pocket factory set up to load powder bar allow you to Available in all popular several popular rifle swager. Loads up to .308 one caliber. load magnum rifle calibers. pistol and rifle calibers. calibers. Win./7.62x51 cartridges. Facts and Figures Square Deal B RL 550C XL 750 Super 1050 RL 1100 COST Base price $459.99 $509.99 $649.99 $1999.99 $1999.99 Caliber Conversion price range $99.99-109.99 $52.99-62.99 -
Table 20C.1 CENTRAL BOARD of DIRECT TAXES
Table 20C.1 CENTRAL BOARD OF DIRECT TAXES STATEMENT SHOWING DETAILS OF PROSECUTIONS UNDER THE DIRECT TAXES ENACTMENTS DURING THE FINANCIAL YEAR 2014‐2015, 2015‐2016 and 2016‐2017 A. RESULT OF SEARCHES Financial Year Value of assets Seized (Rs. in Crores) 2014‐15 761.70 2015‐16 712.32 2016‐17 1469.45 B. STATISTICS FOR PROSECUTION Financial Number Number of Number of Number of Number of Year proceedings proceedings Persons of prosecutio compounded where convictions Convicted proceedin n obtained finally & jailed gs proceedin acquitted gs launched (1) (2) (3) (4) (5) (6) 2014‐15 669 900 34 NA * 42 2015‐16 552 1019 28 NA * 38 2016‐17 1252 1208 16 19 30 # Figure also includes the no. of cases in Col. 6 in which proceedings were compounded & launched from previous year. * The data w.r.t. to the conviction in Col. 5 was not maintained centrally prior to F.Y. 2016‐17. TABLE 20C.1 – Page 1 of 1 Table 20C.2 CENTRAL BUREAU OF INVESTIGATION, NEW DELHI PREVENTION OF CORRUPTION ACT CASES AND THEIR DISPOSAL‐ 2016 A. CBI Disposal 1(a) No. of cases pending investigation from previous year. 571 (b) No. of cases registered during the year. 673 (c) Total No. of cases for investigation during the year. 1244 2. No. of cases recommended for trial during the year. (Charge sheets filed) 339 3. No. of cases sent up for trial and also reported for departmental action during the year. 184 Total (2 + 3) 523 4. No. of cases pending departmental sanction for prosecution during the year. -
Ruger American Rifle® Bolt-Action Rifle
S PM039 INSTRUCTION MANUAL FOR ® RUGER AMERICAN RIFLE BOLT-ACTION RIFLE Standard Hunter NOTE: Bolt installation and removal instructions for the RUGER AMERICAN RIFLE® shipped with the Magpul® Hunter stock, are located at the back of this manual. – Rugged, Reliable Firearms® – READ THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM © 2018 Sturm, Ruger & Co., Inc. This manual may not be reproduced in whole or in part without the express written permission of Sturm, Ruger & Co., Inc. For Service on This Model Please Call: (336) 949-5200 (See p. 30) THIS INSTRUCTION MANUAL SHOULD ALWAYS ACCOMPANY THIS FIREARM AND BE TRANSFERRED WITH IT UPON CHANGE OF OWNERSHIP, OR WHEN THE FIREARM IS LOANED OR PRESENTED TO ANOTHER PERSON. www.ruger.com DBA 5/19 R8 State-By-State Warnings Certain states require by law that their own specified warning notices in larger-than-normal type be conspicuously included by the manufacturer, distributor or retailer with firearms sold in that state. Sturm, Ruger & Co., Inc. sells its products in compliance with applicable laws and regulations. Because our products may be sold in these states, we include the following: California: WARNING “Firearms must be handled responsibly and securely stored to prevent access by children and other unauthorized users. California has strict laws pertaining to firearms, and you may be fined or imprisoned if you fail to comply with them. Visit the Web site of the California Attorney General at https://oag.ca.gov/firearms for information on firearm laws applicable to you and how you can comply. Prevent child access by always keeping guns locked away and unloaded when not in use. -
5.45×39Mm 1 5.45×39Mm
5.45×39mm 1 5.45×39mm 5.45×39mm M74 5.45×39mm cartridge Type Rifle Place of origin Soviet Union Service history In service 1974–present Used by Soviet Union/Russian Federation, former Soviet republics, former Warsaw Pact Wars Afghan War, Georgian Civil War, First Chechen War, Second Chechen War, Yugoslav Wars Production history Designed early 1970s Specifications Case type Steel, rimless, bottleneck Bullet diameter 5.60 mm (0.220 in) Neck diameter 6.29 mm (0.248 in) Shoulder diameter 9.25 mm (0.364 in) Base diameter 10.00 mm (0.394 in) Rim diameter 10.00 mm (0.394 in) Rim thickness 1.50 mm (0.059 in) Case length 39.82 mm (1.568 in) Overall length 57.00 mm (2.244 in) Rifling twist 255 mm (1 in 10 inch) or 195 mm (1 in 7.68 inch) Primer type Berdan or Small rifle Maximum pressure 380.00 MPa (55,114 psi) Ballistic performance Bullet weight/type Velocity Energy 3.2 g (49 gr) 5N7 FMJ mild steel core 915 m/s (3,000 ft/s) 1,340 J (990 ft·lbf) 3.43 g (53 gr) 7N6 FMJ hardened steel core 880 m/s (2,900 ft/s) 1,328 J (979 ft·lbf) 3.62 g (56 gr) 7N10 FMJ enhanced 880 m/s (2,900 ft/s) 1,402 J (1,034 ft·lbf) penetration 3.68 g (57 gr) 7N22 AP hardened steel core 890 m/s (2,900 ft/s) 1,457 J (1,075 ft·lbf) 5.45×39mm 2 5.2 g (80 gr) 7U1 subsonic for silenced 303 m/s (990 ft/s) 239 J (176 ft·lbf) AKS-74UB Test barrel length: 415 mm (16.3 in) and 200 mm (7.9 in) for 7U1 [1] Source(s): The 5.45×39mm cartridge is a rimless bottlenecked rifle cartridge.