Readme for Cisco ANA 3.7.2 Device Package 3.0
Date: May 10, 2011 OL-24561-03
Table of Contents
1 Contents of Cisco ANA 3.7.2 Device Package 3.0 ...... 2
1.1 New Software/Feature for Cisco Network Elements ...... 2
1.2 New Support for Device Package Mechanism ...... 3
1.3 New Reduced Polling (EVNE) Support ...... 4
1.4 New Support for Cisco ANA Configuration and Image Management ...... 4
2 Installing Cisco ANA 3.7.2 Device Package 3.0 ...... 4
3 List of Latest Driver Files ...... 5
4 Resolved Bugs ...... 6
4.1 Bug Resolutions That Require ANA Patches ...... 7
5 Open Bugs ...... 8
5.1 Device-Specific Open Bugs ...... 8
5.2 Cisco ANA-Specific Open Bugs ...... 11
6 Related Documentation ...... 14
7 Appendix A ...... 14
1 Contents of Cisco ANA 3.7.2 Device Package 3.0 Cisco Active Network Abstraction (Cisco ANA) 3.7.2 Device Package (DP) 3.0 provides the following new and enhanced device support and bug fixes for Cisco VNEs.
Note: At any point of time, to get the most up-to-date support for a VNE, install the most recent DP that is available from Cisco.com. To verify whether you have latest driver versions, see Section 3.
Note : Device packages are cumulative. This means that all of the content supported in a previous DP version will continue to be supported in subsequent DP versions. In other words, a DP will contain new support plus all of the support from earlier DPs.
Readme document for Cisco ANA 3.7.2 Device Package 1.0 Readme document for Cisco ANA 3.7.2 Device Package 2.0
1.1 New Software/Feature for Cisco Network Elements This DP provides the following new NE support. Note that jar files are cumulative; a jar that is revised for a newer DP contains all of the support that was contained in the previous version of the jar. (For example, cisco-70xx-ANA3.7.2-v2.0.jar contains all of the support that was delivered in cisco-70xx- ANA3.7.2-v1.0.jar.) Bug fixes are listed in Section 4.
The following table describes the new NE support provided in Cisco ANA 3.7.2 DP 3.0 (Cisco-ANA-3.7.2-DP3.tar ).
Device Techno- Name and Version of Jar File Containing Software Modules Series logies the New NE Support
10000 15.0(1)S3a Cisco-100xx-ANA3.7.2-v1.2.jar 7600 15.1(1)S2 Cisco-76xx_65xxIOS-ANA3.7.2-v1.3.jar XE 3.2.2S SPA-1X10GE-WL-V2 ASR 1000 Cisco-ASR10xx-ANA3.7.2-v1.3.jar XE 3.3.0S SPA-1CHOC3-CE-ATM Star OS 10.0 ASR 5000* Star OS 11.0 Cisco-ASR5000-ANA3.7.2-v1.0.jar Star OS 12.0 SPF-10G-LR ASR 9000 Cisco-ASR90xx-ANA3.7.2-v1.3.jar SPF-10G-SR *For Demo purpose only , not for Production Deployment
12.2(18)SXF12a 12.2(18)SXF13 12.2(18)SXF14 12.2(18)SXF15 12.2(18)SXF15a 12.2(18)SXF16 12.2(18)SXF17 12.2(18)SXF17a 12.2(33)SXH3 12.2(33)SXH3a Cat 6500 12.2(33)SXH4 Cisco-76xx_65xxIOS-ANA3.7.2-v1.3.jar 12.2(33)SXH5 12.2(33)SXH6 12.2(33)SXH7 12.2(33)SXH8 12.2(33)SXI1 12.2(33)SXI2a 12.2(33)SXI3 12.2(33)SXI4 12.2(33)SXI4a 12.2(33)SXI5 CRS DWDM-XENPAK-xx.xx* Cisco-CRS-ANA3.7.2-v1.3.jar MWR 2941 12.2(33)MRB4 Cisco-MWR29xx-ANA3.7.2-v1.2.jar ME 3750 12.2(58)SE Cisco-3750ME-ANA3.7.2-v1.0.jar ME3400 / 12.2(58)SE Cisco-3400ME-ANA3.7.2-v1.0.jar 3400E ME3600X/ Cisco-ME36XX-ME38XX-ANA3.7.2- 12.2(52)EY1 ME3800X v1.2.jar NX-OS 4.2(6) Nexus 7000 NX-OS 5.1(1a) Cisco-Nexus70xx-ANA3.7.2-v1.2.jar NX-OS 5.1(3) * For exact model numbers , see the Addendum: Additional Cisco VNE Driver Support for Cisco ANA 3.7.2.
For the comprehensive list of support provided by the DPs to date , refer to the Addendum: Additional Cisco VNE Driver Support for Cisco ANA 3.7.2.
1.2 New Support for Device Package Mechanism This DP provides support for the Device Package update mechanism for the following devices. (This means that these devices can support VNE updates from the Cisco ANA Software Download site on Cisco.com.) Device Series DP Support Added in Jar File Name and Version ME 3400/3400E Cisco-ANA-3.7.2-DP3.tar Cisco-3400ME-ANA3.7.2-v1.0.jar ME3750 Cisco-ANA-3.7.2-DP3.tar Cisco-3750ME-ANA3.7.2-v1.0.jar
1.3 New Reduced Polling (EVNE) Support This DP provides reduced polling (event-based polling) support for the following devices. After installing the DP, when you create a VNE for these device families using the Cisco ANA Manage GUI client, you will be able to choose reduced polling for these VNEs. (For information on reduced polling, see the Cisco Active Network Abstraction 3.7.2 Administrator Guide.)
Device Series EVNE Support Added in Jar File Name and Version Nexus 5000 Cisco-ANA-3.7.2-DP3.tar Cisco-Nexus50xx-ANA3.7.2-v1.1.jar ME3750 Cisco-ANA-3.7.2-DP3.tar Cisco-3750ME-ANA3.7.2-v1.0.jar ME3400/3400E Cisco-ANA-3.7.2-DP3.tar Cisco-3400ME-ANA3.7.2-v1.0.jar
Note: For information regarding the support provided in previous DPs, refer to the respective DP readme files. Links are provided in Section 6.
1.4 New Support for Cisco ANA Configuration and Image Management This DP provides the following new support for Cisco ANA Configuration and Image Management. For bug fixes, see Section 3.
Device Software Software Jar File Name New Support Series Release Version Functionality Supported and Version Added in ASR Star OS Configuration and Image Management Cisco- Cisco-ANA- 5000* 10.0,11.0, NCCM_Core- 3.7.2-DP3.tar 12.0 ANA3.7.2- v1.3.jar *For Demo purpose only , not for Production Deployment
Note: For information regarding the support provided in previous DPs, refer to the respective DP readme files. Links are provided in Section 6.
2 Installing Cisco ANA 3.7.2 Device Package 3.0 For instructions on how to install (or uninstall) the DP, see Cisco ANA 3.7.2 Device Package Installation Guide. It is available from two places:
The Cisco ANA Software Download site on Cisco.com. Log into Cisco.com and navigate to Cisco ANA Network Abstraction 3.7 > ANA Independent VNE Drivers. The Cisco ANA documentation site on Cisco.com.
Note: If your system contains units along with the gateway, after installing the DP on the gateway, you must delete all the jars under Main/drivers folder and restart the unit using anactl restart. See CSCtq15260 in Section 5.2.
3 List of Latest Driver Files The following list reflects the latest versions of all Cisco ANA 3.7.2 VNE driver files for Cisco devices. This includes the drivers that were provided with Cisco ANA 3.7.2, without any DPs installed. Shaded areas indicate jars that were added / revised in this DP. To check, if the system has the latest driver files that are available, log into the gateway server and compare the contents of your $ANAHOME/Main/drivers directory with the list below.
Note: This table contains only Cisco VNE Drivers files ( files prefixed with “Cisco” ) under $ANAHOME/Main/drivers. Other than the files listed below , Non Cisco VNE drivers files are also present under the directory.
DP Support for Latest Version of Driver File version 12000 Cisco-12xxx-ANA3.7.2-v1.3.jar DP 3.0 10000 Cisco-100xx-ANA3.7.2-v1.2.jar DP 3.0 Mib2 Mib2-ANA3.7.2-v1.2.jar DP 3.0 Nexus 7000 Cisco-Nexus70xx-ANA3.7.2-v1.2.jar DP 3.0 DP3.0 Nexus 5000 Cisco-Nexus50xx-ANA3.7.2-v1.1.jar 7600 & 6500 Cisco-76xx_65xxIOS-ANA3.7.2-v1.3.jar DP 3.0 All Devices Cisco-Commons-ANA3.7.2-v1.3.jar DP 3.0 All IOX Devices Cisco-IOX-Commons-ANA3.7.2-v1.3.jar DP 3.0 ASR 1000 Cisco-ASR10xx-ANA3.7.2-v1.3.jar DP 3.0 ASR 5000 Cisco-ASR5000-ANA3.7.2-v1.0.jar DP 3.0 ASR 9000 Cisco-ASR90xx-ANA3.7.2-v1.3.jar DP 3.0 CRS Cisco-CRS-ANA3.7.2-v1.3.jar DP 3.0 ME36xx & ME38xx Cisco-ME36XX-ME38XX-ANA3.7.2-v1.2.jar DP 3.0 ME3400 Cisco-3400ME-ANA3.7.2-v1.0.jar DP 3.0 ME3750 Cisco-3750ME-ANA3.7.2-v1.0.jar DP 3.0 Modules Cisco-Modules-ANA3.7.2-v1.3.jar DP 3.0 MWR29xx Cisco-MWR29xx-ANA3.7.2-v1.2.jar DP 3.0 NCCM Core Cisco-NCCM_Core-ANA3.7.2-v1.3.jar DP 3.0 NCCM IOX Cisco-NCCM_IOX-ANA3.7.2-v1.3.jar DP 3.0 Other Cisco VNEs* Cisco-Others-ANA3.7.2-v1.3.jar DP3.0 ISR 3900 Cisco-ISR39xx-ANA3.7.2-v1.1.jar DP 2.0 70xx Cisco-70xx-ANA3.7.2-v1.1.jar DP 2.0 ACE 4710 Cisco-ACE4710-ANA3.7.2-v1.1.jar DP 1.0 UBR 10k Cisco-UBR100xx-ANA3.7.2-v1.0.jar ANA372 UBR 7200 Cisco-UBR72xx-ANA3.7.2-v1.0.jar ANA372 ICMP Device Generic-ICMP-ANA3.7.2-v1.0.jar ANA372 *For VNEs which are not yet supported by the new Device Package mechanism. Pl. refer to the
Appendix A for the list of devices at the end of the document
4 Resolved Bugs This section lists all bugs that are resolved in this DP, and the DP that contains the fix.
In some cases, a jar file may be updated only because it contains a bug fix (it does not provide any new NE support). If that is the case in this DP, those jars are listed below.
Jars Containing Only Bug Fixes Provided in Cisco-NCCM_Core-ANA3.7.2-v1.3.jar Cisco-ANA-3.7.2-DP3.tar
The following table lists the bug resolutions that are included in this DP 3.0.
Bug Platform Description DP Release All XR Mac address doesnot get modified in GUI for Ether Cisco-ANA-3.7.2- CSCto10818
devices bundle on XR12k DP3.tar
Modeling issue during Card Down scenario on Cisco ASR Cisco-ANA-3.7.2- CSCtl25159 ASR9000
9000 series device DP3.tar
ASR9K LAG is modeled incorrectly as EtherChannel Cisco-ANA-3.7.2-
CSCto16331 ASR9000
DP3.tar
MLPPP Bundles not discovered properly for A9k Cisco-ANA-3.7.2-
CSCti73471 ASR9000
DP3.tar
Cisco-ANA-3.7.2- CSCtn92843 ACE-47xx wrong log message while distributing an image
DP3.tar
Cisco-ANA-3.7.2- CSCtn92843 ACE-47xx Wrong log message while distributing an image
DP3.tar
Cisco-ANA-3.7.2- CSCto04240 ACE-47xx Wrong File modeling in ACE 4701
DP3.tar
NCCM for Cisco-ANA-3.7.2- CSCto68283 ASR9K does not get fully discovered
XR devices DP3.tar
Cisco 7200 - Link Filter discovery is not layer-specific in Cisco-ANA-3.7.2- CSCti42005 7200
Cisco ANA DP3.tar
Cisco-ANA-3.7.2-
CSCto61526 ME3750 Missing bridges on 3750ME
DP3.tar
Cisco-ANA-3.7.2- CSCto73111 ASR 1000 EVNE Feature is not working for ASR1k in April DP
DP3.tar
Cisco-ANA-3.7.2- CSCto62245 Nexus 7000 Missing physical inventory on Nexus 7K
DP3.tar
Cisco-ANA-3.7.2- CSCto16331 ASR9000 ASR9K LAG is modeled incorrectly as EtherChannel
DP3.tar
Static routes are not populated in routing table for ISR Cisco-ANA-3.7.2- CSCto13694 Cisco-others
2900 DP3.tar
CSCto68305 Applicable ANA 3.7 ASR 9K XR 4.0.1 Missing logical inventory Cisco-ANA-3.7.2-
to al XR MPBGP BGP neighbors DP3.tar devices
Note: For information regarding the support provided in previous DPs, refer to the respective DP readme files. Links are provided in Section 6.
4.1 Bug Resolutions That Require ANA Patches The following bug resolutions are contained in this DP. However, to get the complete bug fix you must also install the indicated version (or later revision) of the ANA patch. The following table lists these bugs along with the required ANA patch, and the ANA bug identifier . The table also list bugs that impact the DP installation , uninstallation , rollback feature and the necessary ANA Patch that need to be installed to get the fix.
To obtain any ANA patches, contact your Cisco representative.
Required ANA Patch Resolved Identifier Platform Headline (ANA bug) in CSCto34063 ASR 1000 ASR9K does not get fully discovered Not Yet Available DP3.0
CSCtd04534 TE FRR protected trap needs to be 7600 Not Yet Available DP3.0 expedited Common Add TE-Tunnel rerouted/ CSCto67407 to all ANA 3.7.2.0.4 (CSCtn02773) DP 3.0 reoptimized syslog/trap flow devices CRS-8: mpls l3 vrf dwn trap alarm CSCto08087 CRS ANA 3.7.2.0.4 (CSCto71654 ) DP 3.0 not correlated to SIP card out ticket DP rollback does not work in a CSCto08456 NA ANA 3.7.2.0.4 gateway + unit setup No cefcFRUInserted event in CSCtl87991 7200 ANA 3.7.2.0.4 DP2.0 ANA3.7.2 Ivne install script fails when nsa.jar is CSCto08152 * NA ANA 3.7.2.0.3 ( CSCto08152) in main/drivers directory Test-ID 414 - Insert SFP/XFP (AGS2a, CSCtn59676 ASR 9000 ANA 3.7.2.0.3 (CSCtn80506) DP 2.0 Port Ten0/4/0/0) The link in Polling tab from Device CSCto05154 NA ANA 3.7.2.0.3 (CSCto01102 ) DP 2.0 Prop doesnt show all EVNE devices No cefcFRUInserted event in
CSCtl87991 NA ANA 3.7.2.0.3 ( CSCtl87991) DP 2.0 ANA3.7.2 *This bug occurs only when Network Service Activation 1.2 is installed on the ANA server.
5 Open Bugs
5.1 Device-Specific Open Bugs Bug ID Platform Description Impact Workaround Missing association for ASR Association of cefc FRU removed and cefc cefc FRU removed Trap CSCto99302 9000 FRU inserted traps on Cisco ASR9K device is None on AS9K not happening with SFP/XFP moduless
CSCto43160 All XR ANA polling during RSP Packet drop on scaled traffic during RSP fail devices switchover lead to over, when ANA is used for service None packet loss assurance.
Test-ID 406 - Remove After Performing an Card-out operation on a CSCtn59607 ASR9k Line Card (Card 6) from ASR9000 Device Multiple Card in alarms are None ASR9000 (AGS2a) observed for Power supply and FAN in ANA
Cisco GSR IOS XR If a pluggable port is removed from a Cisco 12000 pluggable port status GSR device running Cisco IOS XR 4.0 or 4.0.1, CSCtl10872 (XR) changes to Out when Cisco ANA displays the port status Out None removed instead of Missing Pluggable Port.
If you switch off the power supply tray on a Cisco CRS-1 16-slot shelf for a Cisco CRS 16-slot device running running Cisco IOS XR CSCtf47898 CRS Cisco IOS XR 3.8.2, the power supplies in the 3.8.2-Power Supply None shelf are displayed with the status OK in issue on OIR Cisco ANA
In ANA Manage, when user clicks “selected Missing VNE Nexus devices” from VNE Polling tab (to list devices Nexus 5000 from GUI list of CSCto95878 that support reduced polling), Nexus 5000 is None 5000 supported EVNE not listed even though it supports reduced devices polling. 7200: LSE MPLS LSE MPLS interfaces will not model in Cisco CSCto33971 7200 interfaces not None 7200 devices modeling Some properties in vrf In label and out label properties in vrf route CSCto38659 7200 route table aren't None table will not model for Cisco 7200. modeled properly TE FRR protected trap MPLS TE FRR State Changed to Active" is not CSCtd04534 7600 None needs to be expedited correlated to Link down/Port down Tickets. EVNE(ME3600X): LLDP LLDP service under Logical Inventory in Add the VNE is not getting properly CSCtn97883 ME 3600 network vision is not getting updated when in normal enabled with Reduced we add ME3600X VNE as "reduced polling" polling. Polling
Bug ID Platform Description Impact Workaround The device ins't model Removing Active RSP inrder to ASR on ASR9k VNE stuck on Removing Active RSP on ASR9k VNE stuck on CSCto34063 modeling it 9000 Currently Currently Unsynchronized need to stop Unsynchronized the vne and start Standard Links are not Standard links are not discovered or CSCtn31264 7600 None discovered modeled. Logical inventory items such as CRS-1 Version 4.0.1 RoutingTable, mpls-ldp-peers, CSCtn13749 CRS not complete None VrfRoutingTarget, and ospf-interfaces are Modeling on ANA not modeled. If a CWDM SFP is inserted into a Cisco 4900 Cisco ANA does not Catalyst or Cisco 4500 device, Cisco ANA Network CSCtc37407 model CWDM SFP None 4900 Vision displays the Hardware Type of correctly CWDM GBIC instead of CWDM SFP. Cisco ANA does not model ports under SPA- Cisco uBR10012: Port 24XDS-SFP cards for Cisco uBR10012 devices UBR CSCtf00180 is not modeled under running Cisco IOS 12.2(33)SCB2. As a result, None 10000 SPA-24XDS-SFP card these ports are not displayed in Cisco ANA Network Vision maps or in inventory. IPv6 and IPv6-related information is not IPV6 command not Nexus displayed in Cisco ANA for Cisco Nexus 5xxx CSCtj33061 supported in Cisco NX- None 5000 series devices running Cisco NX-OS 4.2 OS version 4.2 software. If you switch off the power supply tray on a Cisco CRS-1 16-slot shelf for a Cisco CRS 16-slot device running running Cisco IOS XR CSCtf47898 CRS Cisco IOS XR 3.8.2, the power supplies in the None 3.8.2-Power Supply shelf are displayed with the status OK in issue on OIR Cisco ANA. Cisco CRS-1 Series Cisco ANA does not model the ports for 2x10GE WAN/LAN Cisco CRS-1 series devices with 2x10GE CSCtl01310 CRS None Flexible Interface WAN/LAN modules running Cisco IOS XR Module not modeled 3.9.0 software Cisco GSR IOS XR If a pluggable port is removed from a Cisco 12000 pluggable port status GSR device running Cisco IOS XR 4.0 or 4.0.1, CSCtl10872 None (XR) changes to Out when Cisco ANA displays the port status Out removed instead of Missing Pluggable Port. GSR - Pluggable port is 12000 When SFP plug is out/in, port is re-added in CSCtl12947 recreated when pulling None (XR) GUI due to entityPhysicalIndex change. the SFP out When a card is powered down, instead of changing the status to Out, pluggable ports Modeling issue during display the status Disabled and change the ASR Card Down scenario on CSCtl25159 text that is displayed. This situation occurs None 9000 Cisco ASR 9000 series when the card is powered down by using device the following command: hw-module shutdown location a/b/c 12000 Even fixed ports show Fixed ports also show properties of CSCtl50442 None (XR) Pluggable params pluggable ports in Cisco ANA GSR device
Bug ID Platform Description Impact Workaround running Cisco IOS XR version 4.0.0. Power supply status When the ASR9K device is running with ASR shown Green in ANA, CSCtn23178 Cisco IOS XR version 4.0.1, a failed power None 9000 when device status is supply is still shown as Green. failed Cisco ASR 1006 devices running Cisco IOS Cisco ASR 1006 devices 15.1(1)S software are partially discovered in ASR are partially Cisco ANA Network Vision. Specifically, Cisco CSCtk57848 None 1000 discovered and oher ANA Network Vision models a duplicate issues power supply and provides no module unsupported information. HSRP Group is not If HSRP is removed from interface, the HSRP updated even after CSCtn16313 ME 36XX group tab (under the interface) is not None removed for Whales - updated. This applies to all IOS. Applicable to all IOS Test-ID 406 - Remove After Performing an Card-out operation on a CSCtn59607 ASR9000 Line Card (Card 6) from ASR9000 Device Multiple Card in alarms are None ASR9000 (AGS2a) observed for Power supply and FAN in ANA Cisco GSR IOS XR If a pluggable port is removed from a Cisco pluggable port status GSR device running Cisco IOS XR 4.0 or 4.0.1, CSCtl10872 GSR XR None changes to Out when Cisco ANA displays the port status Out removed instead of Missing Pluggable Port. ANA does not display xr-phy- Cisco ANA does not display correct DRAM CSCtl85986 correct DRAM info for None infra info for IOS XR devices IOS-XR devices If you switch off the power supply tray on a Cisco CRS-1 16-slot shelf for a Cisco CRS 16-slot device running running Cisco IOS XR CSCtf47898 CRS Cisco IOS XR 3.8.2, the power supplies in the None 3.8.2-Power Supply shelf are displayed with the status OK in issue on OIR Cisco ANA Power supply status shown Green in ANA, CSCtn23178 ASR9000 Power supply status will be shown wrongly None When in device status is failure A pluggable port modeling issue occurs Modeling issue during when a card is shut down.Instead of Card Down scenario on changing the status to Out when a card is CSCtl25159 ASR9000 None Cisco ASR 9000 series powered down, pluggable ports display the device status Disabled and change the text that is displayed. Even fixed ports show Fixed ports also will show the pluggable CSCtl50442 GSR XR None Pluggable params properties in Cisco ANA CSCtl12947 GSR - Pluggable port is Port will get readded in GUI due to GSR XR recreated when pulling entityPhysicalIndex change when SFP is plug None . the SFP out out/in
5.2 Cisco ANA-Specific Open Bugs Bug ID Description Impact Workaround CSCtq15260 IVNE Installation not On a g/w + unit setup, older versions of * Login as anauser in the unit. working properly in vne drivers are not deleted during DP *Remove all jars under the Gateway+ Unit Set up installation following location under your units: %cd ~/Main/drivers %rm -rf *.jar % anactl restart
CSCto46627 TenGig - interface TenGig interface configured with OSPF None under OSPF Neighbor & learned by the neighbor is not table is not populating displayed in Cisco ANA in ANA CSCto42202 Some of the Multilink Some of the multilink interfaces None interfaces are missing configured under BFD is not displayed under BFD in ANA
CSCto14333 GSR XR EVNE : In GSRXR Device while modelling with Model the device using normal Ethernet Link Reduced Polling Mechanism,updates for polling mechanism Aggregation Not mode change from Manual to LACP are not getting reflected in ANA in Ethernet changed from Manual Link Aggregation to LACP
CSCto13193 ANA372: CRS16slot The FAN OIR card out/in service alarm None Fan OIR not are not getting generated for CRS device generating card out/in Ticket CSCtn83509 VRF GUI was throwing VRF not modeled in product scheme None cast error on product for GSR-XR CSCtk08479 Link Down alarms is On Cisco CRS-1 devices running Cisco None not correlated to Card IOS XR 3.7.1[00] software, Link Down Down alarm alarms are not correlated to a Card Down alarms. CSCto69964 CRS1: SIP Reload did While testing SIP card reload it was None not create 'Port down noticed that instead of creating 'Port due to card' alarm down due to card' alarm ANA creates 'Port down due to admin' alarm, which is not correlated to the 'Card down' root-cause alarm. CSCth66040 Missing segments Missing segments binding in the local None binding in the local switching entry under Local Switching switching entry Table. The fields should contain a link to the relevant sub interface
Bug ID Description Impact Workaround CSCtj40515 CDP table port n Cisco ANA NetworkVision logical 1. Stop the VNE. hyperlink and port inventory for CDP, the hyperlink for 2. Delete the inventory and status do not update theport identifies the wrong port. topology persistency files for the correctly VNE. 3. Restart the VNE.
CSCtk60990 Cisco ANA places an If VRF is configured with multilink None interface under the interfaces, Cisco ANA also populates it wrong VRF on a nonmember VRF. 1. Delete the Cisco ASR9k device from the AVM. redundancy states are The Redundancy related properties are 2. Re-add the Cisco ASR9k device CSCto49912 not updated after not updated after the Standby RSP card to the AVM. standby RSP out/in that was removed is inserted back
* Login as anauser. Rollback of DP appends the vne drivers *Remove all jars in your units as DP rollback does not jar in the unit rather than updating below: CSCto08456 work in a gateway + them. Thereby causing the rollback to %cd ~/Main/drivers unit setup fail. %rm –rf *.jar % anactl restart Network Service Assistant ( NSA) will * Login as anauser. not work if NSA is installed after taking *Move the nsa.jar to /tmp. NSA isn’t working driver backup ( using ivne script ) and %cp ~/Main/drivers/nsa.jar /tmp CSCto08571 after performing *Install / rollback of VNE DP rollback of the backup rollback to DP Restore the nsa.jar %cp /tmp/nsa.jar ~/Main/driver % anactl restart During end of DP installation, user is User has to explicitly restart the IVNE installation isn’t prompted for ANA restart. Even if the CSCto27982 restarting unit customer enters “y”, only gateway is unit at the end of DP installation restarted and units are not restarted. Irrespective of whether the device is loaded with IOS or CatOS, pos- login Post-login commands commands (terminal length 0, terminal CSCth57987 None are IOS type agnostic width 512 and set length 0) will be sent. This will give errors in logs. It does not have any other impact. Get Card Down ticket The Card Down ticket and alarm are CSCth89171 when loading a device generated when you start a VNE the None the first time first time, or restart a VNE. 1. Delete the Cisco 65xx device Cisco Catalyst 6500 Cisco ANA Network Vision models Cisco that is loaded with event-based CSCtk36262 devices modeled for Catalyst 6500 series devices with event- polling from the AVM. event-based polling based polling. 2. Re-add the Cisco 65xx device to the AVM. Cisco ANA can take more time to model Modeling Cisco CatOS physical inventory for Cisco 6500 series CSCti95423 None takes a long time devices running Cisco CatOS version 8.5(7) software.
Bug ID Description Impact Workaround After upgrading to Cisco ANA Migration: Legacy When updating to Cisco ANA 3.7.2 from 3.7.2, download the activation scripts from Cisco ANA earlier versions of Cisco ANA, Cisco CSCtk00267 scripts from the Cisco Developer 3.7.1 disappear after Developer Network activation scripts Network site and install them in migration are not displayed in the Cisco ANA GUI. Cisco ANA. When running the Trace detail script on the SONET ports of a Cisco CRS device IPoDWDM-Trace with Cisco IOS XR 3.9.0, the script fails. detail script fails in CSCtd50358 The Trace detail script is available by None Cisco CRS with Cisco right-clicking the device and then IOS XR 3.9.0 selecting Commands > SONET > Show > Trace Details. 1. Stop the VNE. CDP table port In Cisco ANA Network Vision logical 2. Delete the inventory and hyperlink and port CSCtj40515 inventory for CDP, the hyperlink for the topology persistency files for the status do not update port identifies the wrong port. VNE. correctly 3. Restart the VNE. Cisco GSR devices: For Cisco GSR devices, MLPPP MLPPP properties are CSCtj90189 subinterfaces are not modeled in Cisco None missing from logical ANA Network Vision. inventory On Cisco CRS-1 devices running Cisco Link Down alarms is IOS XR 3.7.1[00] software, Link Down CSCtk08479 not correlated to Card None alarms are not correlated to a Card Down alarm Down alarms. Interfaces under a Cisco ANA models Bundle Packet over CSCtk60175 Bundle POS appear in SONET/SDH (POS) interfaces under None aggregation groups aggregation groups. GSR-XR average CPU is CSCtl99705 The average CPU of GSR-XR will be high. None High Missing Details The details for BGP notification syslog CSCtn46005 information in BGP None are missing. notification syslog Port utilization graphs The info for ATM interfaces is missing CSCtj79784 does not show info for None from port utilization graphs. ATM interfaces ANA models incorrect port Counter ANA support for 64-bit values for Interfaces with speed Greater SNMP counters for all CSCtn99290 than 20Mbps,This impacts path None interfaces above 20 trace,port utilization graphs and Mbps topology discovery MPLS-TE tunnel The tunnel name will not be shown in CSCtn26377 rerouted trap - wrong event vision for the mpls te tunnel trap None location IOX & the correlation also doesn't happen. ANA372: CRS16slot The FAN OIR card out/in service alarm Fan OIR not CSCto13193 are not getting generated for CRS device None generating card out/in
Ticket
Bug ID Description Impact Workaround GSR XR EVNE : In GSRXR Device while modelling with Ethernet Link Reduced Polling Mechanism,updates for Model the device using normal CSCto14333 Aggregation Not mode change from Manual to LACP are polling mehanism changed from Manual not getting reflected in ANA in Ethernet to LACP Link Aggregation OSPF Links and OSPF link on Bundle Ether interfaces CSCto32857 Interface are not seen Configured on ASR9000 devices are not None between VNE's modelled in ANA. Mac address doesnot In IOX devices, Mac- address is not get modified in GUI CSCto10818 updated for Bundle Ether interfaces None for Ether bundle on when modified on the device XR12k LLDP service under Logical Inventory in EVNE(ME3600X): LLDP network vision is not getting updated CSCtn97883 is not getting properly Add the VNE in normal polling. when we add ME3600X VNE as enabled with Reduced "reduced polling" Polling
6 Related Documentation The following documents provide information that is specific to DPs.
Document Provides the Following Information on DPs Cisco ANA 3.7.2 Device Package Generic instructions for using the ivne script to install and uninstalling Installation Guide (rolling back) a DP, and to list the current versions of the driver files. Addendum: Additional Cisco VNE A complete listing of all support that is available through Cisco ANA 3.7.2 Driver Support for Cisco ANA 3.7.2 DPs. This is a companion document to the VNE portion of the Cisco Active Network Abstraction 3.7.2 Reference Guide. Cisco Active Network Abstraction Complete details about the ivne script and examples of how to use it, along 3.7.2 Administrator Guide with troubleshooting tips. Cisco Active Network Abstraction List of VNEs supported in ANA 3.7.2. 3.7.2 Reference Guide Cisco ANA 3.7.2 Device Package Contents of DP 1.0. 1.0 Readme Cisco ANA 3.7.2 Device Package Contents of DP 2.0. 2.0 Readme
For a complete list of Cisco ANA 3.7.2 documentation, see the Cisco ANA 3.7.2 Documentation Guide.
7 Appendix A
The following device series are supported by Cisco-Others-ANA3.7.2-v1.3.jar. These devices are not yet supported by the Independent Device Package support mechanism.
Routers Not Supported by DP Mechanism Switches Not Supported by DP Mechanism Cisco 1000 Series Routers Cisco Catalyst 1900 Series Switches Cisco 800 Series Routers Cisco Catalyst 2900 Series Switches Cisco 1600 Series Routers Cisco Catalyst 3500 XL Series Switches Cisco 1700 Series Modular Access Routers Cisco Catalyst 3550 Series Switches Cisco 1800 Series Integrated Services Routers Cisco Catalyst 3560 Series Switches Cisco 1900 Series Integrated Services Router Cisco Catalyst 3750 Series Switches Cisco 2500 Series Routers Cisco Catalyst 4000 Series Switches Cisco 2600 Series Multiservice Platform Routers Cisco Catalyst 4500 Series Switches Cisco 2800 Series Integrated Services Routers Cisco Catalyst 4900 Series Switches Cisco 2900 Series Integrated Services Router Cisco ME 4900 Series Ethernet Switch Cisco 3600 Series Multiservice Platform Routers Cisco Catalyst 5000 Series Switches Cisco 3700 Series Multiservice Access Routers Cisco Catalyst 6500 Series (CatOS) Switches Cisco 3800 Series Integrated Services Routers Cisco ME 6500 Series Ethernet Switches (6524) Cisco 4700 Series Routers Cisco Service Control Engines Access Servers Gateways/Security Appliances/Generic Devices Not Supported by DP Mechanism Cisco Access Server 5800 Series Cisco Adaptive Security Appliance 5550 Series Cisco AS5300 Series Universal Gateways Generic devices